Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural system identification of cable-stayed bridges with observability techniques

  • Lozano Galant, José Antonio
  • Nogal, María
  • Turmo Coderque, José
  • Paya-Zaforteza, Ignacio
Cable-stayed bridges are highly statically redundant, light and flexible structures. This complexity highlights the role of the structural system identification (SSI) method in the calibration of the actual properties of the simplified models of these structures. This study proposes the first application of observability techniques to SSI of cable-stayed bridges. This method enables to define which subset of actual structural variables should be measured on site to identify mechanical properties, such as Young s modulus, area and inertia, or stiffnesses (EA and EI) of deck, pylon and stay cables. The effects of the inclination and inertia of the stay cables and the existence of pylon and deck cracking in the observability of different cable-stayed bridges are studied. The results obtained are validated by the models of actual cable-stayed bridges., The authors are indebted to the Secretary of State of the Spanish Ministry of Science and Innovation (Projects TRA2010-17818, BIA2009-10483 and BIA2009-13056) and to the Junta de Comunidades de Castilla-La Mancha (Project PII2I09-0129-4085) for partial support of this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural analysis of Eduardo Torroja&apos, s Frontón de Recoletos&apos, roof

  • Lozano-Galant, José Antonio
  • Paya-Zaforteza, I.
Eduardo Torroja's thin concrete shells stand among the best examples of structural engineering work of the 20th century. At a time when computers did not exist, Torroja's imagination and creativity were not constrained by the limits of the analytical methods available for structural design, and he was able to design and build economically innovative structures of the highest aesthetic quality. One of his major creations was the roof of the Frontón Recoletos, a unique two lobe thin shell that was destroyed during the Spanish Civil War. This paper reviews briefly the history of the Frontón, shows the results of a structural analysis of its roof by several Finite Element (FE) models of different complexity and precision, and compares FE results to those obtained by Torroja. FE results confirm the validity of Torroja's conceptual design, although he seems to have underestimated the internal forces and stresses in the roof. In addition, the paper analyses in detail the influence on the behaviour of the roof from its support conditions and from the stiffening ribs that Torroja designed but that never were built. As a result, the paper enables a better understanding of one of the masterpieces of Structural Art, and of simplified and complex shell analysis models, which is useful for the education of engineers as well as for future designs. © 2010 Elsevier Ltd., Funding for this research has been provided to Mr. Paya-Zaforteza by the Spanish Ministry of Education through its program for postdoctoral stays (Contract No. EX-2008-0669) and to Mr. Lozano-Galant by the Junta de Comunidades de Castilla La Mancha, Spain (Research Project PII2I09-0129-4085). The authors are also grateful to Prof. J. Antuna and J.A. Torroja of the Universidad Politecnica de Madrid, Professors C. Lazar and J.M. Adam of the Universidad Politecnica de Valencia and Professors H. Sundquist and C. Pacoste of the Royal Institute of Technology of Stockholm for their assistance and support. The authors also want to thank the Archivo Torroja and its librarian, Isabel Garcia, for all the information and support provided. Finally, the authors express their gratitude to CEng W. Plunket who carefully reviewed the English of the manuscript and to M.Sc. C. Llopis who lent the authors his original copy of Ref. [23].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of the construction process of cable-stayed bridges built on temporary supports

  • Lozano-Galant, Jose A.
  • Paya-Zaforteza, I.
  • Xu, Dong
  • Turmo Coderque, José
The temporary supports erection method is a fast and economical way of building cable-stayed bridges. In this method the bridge deck is first erected on a set of temporary and permanent supports and then, the stays are successively placed and tensioned according to a predefined tensioning sequence. A proper definition and analysis of this sequence is very complex as the structure is highly statically indeterminate, exhibits a non linear behavior and has a changing static scheme.Despite its importance, no specific research referring to the modeling of the temporary support erection method has been found as most of the modeling procedures are proposed for the alternative erection technique, the cantilever erection method. The modeling carried out by most of these methods is based on the opposite construction sequence followed on site, this is to say, the structure is disassembled from the desired final stage (. Objective Completion Stage, . OCS).A procedure, the Backward Algorithm (. BA), is formally presented in this paper for calculation of the erection of cable-stayed bridges built on temporary supports. Because of its simplicity the . BA can be reproduced by any structural code that enables the modeling of the prestresses of the stays by means of imposed strains or imposed temperature increments. Another advantage is that no separate models are needed to calculate the evolution of stresses in the strands when the strand by strand tensioning technique is used. Furthermore, the stay elongations when prestressed can be easily obtained when the stays are prestressed in a single operation or strand by strand. This information is important to control the correct and safe prestressing of the stay on site. In addition, it also help the designer to control if the anchor wedge bites the strand in the same position several times during the prestressing process. © 2012 Elsevier Ltd., Part of this work was done through a collaborative agreement between University of Castilla-La Mancha (Spain) and Tongji University (China). This included an exchange of faculty and scholars. The financial support from Kwang-Hua Foundation from College of Civil Engineering of Tongji University and from the International Relation Office of University of Castilla-La Mancha is greatly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Forward Algorithm for the construction control of cable-stayed bridges built on temporary supports

  • Lozano-Galant, Jose A.
  • Paya-Zaforteza, I.
  • Xu, Dong
  • Turmo Coderque, José
Traditionally the construction process of cable-stayed bridges is modeled according to the backward approach, as its calculation is much easier using an elastic analysis. In this approach the bridge is disassembled according to the opposite sequence of events which occur during its erection. The main trade off of the backward approach is that time-dependent phenomena, such as creep, shrinkage or cable relaxation, cannot be directly computed as the analysis is performed according to the reversed time direction.In this paper the Forward Algorithm (FA) that is based on the forward approach is formally presented. This procedure has been applied to the temporary supports erection method as no specific investigation of this erection technique has been found by the authors. The FA has the following advantages: (1) Modifications in design and/or tensioning strategy can be easily computed. (2) The effect of time-dependent phenomena can be efficiently included into the calculation of the construction process of the bridge. (3) Differences between the temperatures in the structural elements assumed when doing the structural analysis of the bridge and the real ones when built can be calculated without the need of separate models. (4) The stresses in the mono-strands when the strand by strand prestressing technique is used are obtained directly. (5) Stay and strand elongation, which are very useful to control the prestressing operations, can be also easily computed. All these features make the FA an efficient procedure to control the construction process on site, increasing safety during construction and decreasing construction time. © 2012 Elsevier Ltd., Part of this work was done through a collaborative agreement between University of Castilla-La Mancha (Spain) and Tongji University (China). This included an exchange of faculty and scholars. The finantial support from Kwang-Hua Foundation from College of Civil Engineering of Tongji University and from the International Relation Office of University of Castilla-La Mancha is greatly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Direct simulation of the tensioning process of cable-stayed bridges

  • Lozano Galant, José Antonio
  • Xu, Dong
  • Paya-Zaforteza, I.
  • Turmo Coderque, José
This paper proposes a new and innovative algorithm, the Direct Algorithm (DA), which introduces, for the very first time, the unstressed length of the stays concept into the modeling of the construction process of cable-stayed bridges. This assumption enables a fast and direct simulation of construction stages by analyzing independent Finite Element Models when time-dependent phenomena are neglected. The computational speed and the limited computer storing requirements of the DA make it especially indicated for optimization problems. Furthermore, it can be implemented in any structural analysis software. (C) 2013 Elsevier Ltd. All rights reserved., Part of this work was done through a collaborative agreement between University of Castilla-La Mancha (Spain) and Tongji University (China). This included an exchange of faculty and scholars. The financial support from Kwang-Hua Foundation from College of Civil Engineering of Tongji University and from the International Relation Office of University of Castilla-La Mancha is greatly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modifications of the stress-state of cable-stayed bridges due to staggered construction of their superstructure

  • Lozano-Galant, Jose Antonio
  • Ruiz Ripoll, Lidia
  • Paya-Zaforteza I.
  • Turmo, José
In current practice, the effects of the evolutionary erection of cable-stayed bridge superstructure are rarely included into the simulation of its tensioning process. In fact, stay forces in service are usually defined in early stages of design, when the construction process has not even been conceived in detail yet. In order to fill this gap, the effects of the evolutionary erection of cable-stayed bridge superstructure throughout the tensioning process are studied in this paper. This study is focused on steel cable-stayed bridges erected on temporary supports. For the very first time a new criterion to include the effects of the evolutionary erection of cable-stayed bridges into the definition of the stay forces in the service state is presented., The authors wish to thank the Ministerio de Economia y Competitividad, the Ministerio de Ciencia e Innovacion and the Junta de Comunidades de Castilla-La Mancha (Spain) for the funding provided through the research projects BIA2013-47290-R, BIA2009-13056 and PII2I09-0129-4085 directed by Jose Turmo and founded with FEDER funds.