Skip to main content

Integración a gran escala de dispositivos optoelectrónicos 2D en plataformas fotónicas PIC estándar (WOW-2D)

PLEC2022-009381

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i en Líneas Estratégicas
Call year 2022
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE GRANADA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Alpha sensing, NIR to green light emission in Er3+ doped PbWO4 nanoparticles with modification of calcination atmosphere

  • Hosseinpour, Maryam
  • Abdoos, Hassan
  • Alamdari, Sanaz
  • Pecharromán, Carlos
  • Menendez, Jose Luis
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] In this study, various concentrations (0.5, 1, and 1.5 at%) of Er3+ PbWO4 nanoparticles (PWO: Er NPs) were prepared using a co-precipitation procedure, and the effect of the calcination atmosphere (air and argon) on the luminescence properties and scintillation responses were investigated. Different characterization analyses were carried out to study the structural and optical characteristics of prepared samples. We found evidence of the transformation of the PWO Scheelite structure into a non-centered group, which effectively influences the symmetry properties of the structure and subsequently its luminescence and sensing properties. Both Ar atmosphere and Er concentration contribute to the distortion of the scheelite structure and the symmetry breaking. However, with increasing dopant concentrations, the lattice becomes more homogeneously distorted, causing the structure to re-symmetrize and, as a result, the intensity of luminescence increases, particularly magnetic dipolar (MD) transitions that correspond to NIR emission. The ideal conditions are given when the impurity percentage reaches 1.5 at%, in the Ar atmosphere. Our PWO: Er (1.5 at%-Ar) sample had a maximum count rate of 1388 and 2082 and detection efficiency of 0.216 and 0.170 cps/Bq under Am-241 sources with 0.22 and 0.26 mu c activities, respectively. By exceeding the efficiency of the commercial ZnS(Ag), it showed promising potential for practical applications in future optoelectronic domains., The authors acknowledge the financial support of postdoc grant from Semnan University (Grant No. 32231) and PLEC2022-009381 project funded by the Spanish Ministerio de Ciencia e Innovacion. The authors also would like to express their sincere appreciation to SHAHAB Radi-onik Company for their invaluable assistance and support in this research for scintillation measurements
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advancements in CMOS-Compatible Silicon Nitride Optical Modulators via Thin-Film Crystalline or Amorphous Silicon p–n Junctions

  • Hernández-Betanzos, Joaquín
  • Blasco-Solvas, Marçal
  • Domínguez Horna, Carlos
  • Faneca, Joaquín
This paper proposes two types of electro-refractive optical modulator structures as a fully CMOS-compatible alternative solution. These modulators leverage the properties of amorphous (top) and crystalline (bottom) silicon films surrounding silicon nitride waveguides operating in the C-band communications range at a wavelength of 1550 nm. Various structures have been demonstrated and explored to compete with or surpass the current state-of-the-art performance of thermal tuners, the most widely used tuning mechanism in silicon nitride integrated photonics. Designs utilizing vertical and lateral p–n junctions with amorphous or crystalline films have been simulated and proposed. For the lateral p–n junctions, modulator lengths to achieve a 𝜋 phase shift smaller than 287 μm have been demonstrated for the TE mode and that smaller than 1937 μm for the TM mode, reaching 168 μm in the case of a lateral p–n junction that is completely a p-doped region over or under the waveguide for TE, and 1107 μm for TM. Power consumption is higher for the TM modes than for the TE, being in the order of 100 mW for the former and lower than 23 mW for the latter. The modulators exhibit higher losses for amorphous material compared to crystalline, with losses smaller than 10.21 dB and 3.2 dB, respectively. The vertical p–n junctions present a larger footprint than the lateral ones, 5.03 mm for TE and 38.75 mm for TM, with losses lower than 3.16 dB and 3.95 dB, respectively, for the crystalline silicon. Also, their power consumption is on the order of 21 mW for TE and 164 mW, This research was funded by the funding agency MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR under the projects: TED2021-132584B-C22, PLEC2022-009381, FJC2020-042823-I and CEX2023-001397-M., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001397-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Alpha sensing, NIR to green light emission in Er3+ doped PbWO4 nanoparticles with modification of calcination atmosphere

  • Hosseinpour, Maryam
  • Abdoos, Hassan
  • Alamdari, Sanaz
  • Pecharromán, Carlos
  • Borrell, Amparo
  • Menéndez, José Luis
In this study, various concentrations (0.5, 1, and 1.5 at%) of Er3+ PbWO4 nanoparticles (PWO: Er NPs) were prepared using a co-precipitation procedure, and the effect of the calcination atmosphere (air and argon) on the luminescence properties and scintillation responses were investigated. Different characterization analyses were carried out to study the structural and optical characteristics of prepared samples. We found evidence of the transformation of the PWO Scheelite structure into a non-centered group, which effectively influences the symmetry properties of the structure and subsequently its luminescence and sensing properties. Both Ar atmosphere and Er concentration contribute to the distortion of the scheelite structure and the symmetry breaking. However, with increasing dopant concentrations, the lattice becomes more homogeneously distorted, causing the structure to re-symmetrize and, as a result, the intensity of luminescence increases, particularly magnetic dipolar (MD) transitions that correspond to NIR emission. The ideal conditions are given when the impurity percentage reaches 1.5 at%, in the Ar atmosphere. Our PWO: Er (1.5 at%-Ar) sample had a maximum count rate of 1388 and 2082 and detection efficiency of 0.216 and 0.170 cps/Bq under 241Am sources with 0.22 and 0.26 µc activities, respectively. By exceeding the efficiency of the commercial ZnS(Ag), it showed promising potential for practical applications in future optoelectronic domains., The authors acknowledge the financial support of postdoc grant from Semnan University (Grant No. 32231) and PLEC2022–009381 project funded by the Spanish Ministerio de Ciencia e Innovación., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Silicon Nitride Building Blocks in the Visible Range of the Spectrum

  • Blasco-Solvas, Marcal
  • Fernandez-Vior, Berta
  • Sabek, Jad
  • Fernandez-Gavela, Adrian
  • Dominguez-Bucio, Thalia
  • Gardes, Frederic Y.
  • Dominguez-Horna, Carlos
  • Faneca, Joaquín
In this study, a platform guiding single-moded light at wavelengths of 480 nm, 520 nm and 633 nm (blue, green and red) is proposed and designed with several components being fabricated and characterised for the specific wavelength of 633 nm. A waveguide with propagation losses of 3.6 dB/cm is obtained, with a high confinement factor of 90.5% and a tight bending radius of 60 μm with 0.2 dB losses per bend, offering a good trade-off between losses, confinement factor and compactness. Also, a 1 × 2 MMI is demonstrated, with a footprint of 5 × 161 μm<sup>2</sup>, and losses of 0.2 dB. Finally, a silicon nitride single-layer grating coupler has been validated to allow the fibre-to-chip coupling, with losses smaller than 11.7 dB. A comparison of the proposed platform with other state-of-the-art stoichiometric silicon nitride technologies performing in the range of the spectrum of 630-660 nm is shown. The present platform demonstrates losses in the order of the state-of-the-art single-mode waveguides, but with an enhancement of the confinement factor from 61% to 90.5%, which allows to decrease the bending radius by 20 μm or more compared with other state-of-the-art technologies., The authors would like to thank Bruno Santos for the measurements of the waveguides. Without the values provided by him, this work would not be fully completed. This work was funded by the Agencia Estatal de In- vestigaci´on, MICIU/AEI/10.13039/501100011033 and for the European Union NextGenerationEU/PRTR (FJC2020-042823-I, and PLEC2022-009381), the UK Research and Innova-tion project Nb EP/T007303/1 “Silicon-rich silicon nitride Nonlinear Integrated Photonic ciRcuits Systems (juNIPeRS)”, EP/R003076/1 “Rockley Photonics and the University of Southampton: A Prosperity Partnership”, the H2020 EU project Plasmoniac under grant agreement 871391 and sup-ported by the MCI-21-PID2020-115204RB-I00 project from the Spanish Ministry of Science and Innovation (MICINN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Silicon nitride stoichiometry tuning for visible photonic integrated components

  • Blasco, Marçal
  • Dacunha, Samuel
  • Dominguez, Carlos
  • Faneca, Joaquín
In integrated photonics, silicon nitride-based devices operating in the visible range of light may experience auto-fluorescence, an undesired effect that can interfere with the propagating signal. In this article, a reduction in auto-fluorescence has been obtained by studying stoichiometric and silicon-rich silicon nitride, subjected to different post-thermal annealings in different atmospheres. Stoichiometric silicon nitride treated with rapid thermal annealing at 1100 °C in an argon atmosphere reduces the photoluminescence intensity of the material by 95%. Silicon-rich nitride shows a more stable photoluminescence response to different annealings and atmospheres than the stoichiometric. Compared to the stoichiometric material, the emission peaks experienced by the silicon-rich silicon nitride are red shifted between 140 and 190 nm, and the refractive index value is increased by 7% at 633 nm. Also, the interface effects have been studied, showing a remarkable contribution when the annealing is performed in an argon atmosphere, while no contribution from these effects is observed in a nitrogen atmosphere. Finally, taking advantage of the refractive index variation between nitrides, a vertical directional coupler using two asymmetric waveguides, one of each type of silicon nitride, has been designed and simulated, obtaining a coupling length of 9.8 μm with a coupling power of 95.8%, demonstrating the 3D integration capabilities of combining silicon nitride layers of variable composition., This work was funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. (No. FJC2020-042823-I) and supported by the PLEC2022-009381 project from the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sm3+-doped PbWO4nanoparticles: defect-tailored luminescence properties for biomedical dosimetric applications

  • Hosseinpour, Maryam
  • Abdoos, Hassan
  • Alamdari, Sanaz
  • Pecharromán, Carlos
  • Menéndez, José Luis
In this study, structural and spectroscopic analyses revealed that the calcination atmosphere and doping concentration critically modulate structural defects and luminescence properties of samarium-doped lead tungstate nanoparticles (PWO: Sm NPs). These factors lower the PWO scheelite structure's symmetry to a non-centrosymmetric group, markedly altering the local symmetry of Sm3+ ions and enhancing luminescence. Substitution of Sm3+ at Pb2+ sites distorts lead polyhedrons, while an argon atmosphere deforms tungsten tetrahedrons, partially reducing W6+ to W5+ to maintain charge balance and promote Sm3+ incorporation. Optimizing the argon atmosphere and Sm3+ concentration yielded a highly efficient scintillator, with PWO: Sm (1 at. %, Ar) achieving a scintillation efficiency of 21.24 cps/Bq, surpassing commercial ZnS(Ag), and exhibiting excellent long-term luminescence stability. These findings underscore the strong potential of PWO: Sm NPs for efficient and stable scintillation applications., The authors acknowledge the financial support of postdoc grant from Semnan University (32231) and PLEC2022-009381 project funded by the Spanish Ministerio de Ciencia e Innovación., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Color and crystal photonic structure in high density microgels determined by spectroscopic diffuse reflectance at the optical range

  • Marcelo, G.
  • Longobardi, Vincenzo
  • Sbera, Larisa G.
  • Mendicuti, F.
  • Pecharromán, Carlos
Ionic PNIPAM microgels in water present the ability to locally self-organize into different microscopic three-dimensional photonic structures. The properties of these arrangements depend on the concentration, temperature, pH, etc, making them a very appealing system to model crystalline structure and design new tuneable photonic devices. However, as these small crystallites are only stable in aqueous suspension in random orientations and they present a very low optical contrast the quantitative description of their optical properties became quite difficult. Herewith, we propose a novel physical model applied to diffuse reflectance spectra, which allows studying the most challenging system, the high-concentrated microgel dispersions (104–129 mg/mL) of PNIPAM microgels copolymerized with methacrylic acid (PNIPAM-MAA), also known as glassy phase. In fact, at this range of weight concentration, microgels are nearly transparent but with uniform colors originated by the presence of photonic microcrystals. By the proposed methodology, it has made possible to correlate the optical properties with the crystallographic structure. Consequently, our results seem to point out that, in the concentrated regime, two crystalline arrangements coexist in the photonic PNIPAM-MAA arrangements: a dominant Body-Centered Cubic (BCC) structure with a smaller fraction of Face-Centered Cubic (FCC)., We thank the Ministry of Science and Innovation for the funding through the projects: CNS2022-135568, PLEC2022-009381 and PID2020-119130GB-I00., Peer reviewed