Skip to main content

OPTIMAR:APLICACIÓN DE SISTEMAS DIGITALES AVANZADOS PARA LA OPTIMIZACIÓN DE LA MONITORIZACIÓN, OPERACIÓN E INTEGRACIÓN DE ENERGÍA EÓLICA MARINA FLOTANTE

PLEC2023-010352

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i en Líneas Estratégicas
Call year 2023
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre FUNDACION TEKNIKER

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Holistic optimization and comparison of mooring systems for floating offshore wind turbines

  • Kallinger, Magnus Daniel
  • Pozo González, Héctor
  • Trubat, Pau
  • Dominguez Garcia, Jose Luis
  • Molins, Climent
[EN] Mooring design is critical to the cost-efficiency of floating offshore wind projects located in deeper waters. This work presents a frequency-domain mooring-optimization framework for floating platforms that enables rapid concept mooring design screening and constraint checks, minimizing early-stage CAPEX. DLC 1.6 and DLC 1.2 are assessed for Ultimate Limit State and Fatigue Limit State, respectively, by Orcaflex’ frequency-domain module. An adaptive particle swarm optimization algorithm is developed in Python, featuring neighborhood regrouping and informed by variable constraint correlations to guide efficient search. The method allows independent variable settings for different line groups, supporting a wide range of materials and components. A static-dynamic stiffness model is applied to a variety of fiber ropes, with linearized integration of load-reduction devices. The methodology is applied on the WindCrete spar and Volturn-US semi-submersible, each with a 15 MW turbine under multidirectional co-aligned environmental conditions. The study moves beyond symmetric mooring assumptions, promoting line-specific, functionally targeted designs. Spars require more complex configurations, while semi-submersibles enable lower cost solutions. Anchors and chains are major cost drivers; Nylon is more economical than Polyester, and wire ropes outperform HMPE (high-modulus polyethylene) for high stiffness solutions. Load-reduction devices and buoyancy modules can be critical but are cost-sensitive. Correlation analysis reveals that especially line form, rope and forerunner chain characteristics, govern whether the mooring system becomes tension-, fatigue- or motion-critical with load-reduction devices acting as secondary tuning elements., SI, “Investigo” grant 2022 C23-I01-P03-S00200000022, CERCA, the Catalan research center institution.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Holistic optimization and comparison of mooring systems for floating offshore wind turbines

  • Kallinger, Magnus Daniel
  • Pozo González, Héctor del
  • Trubat Casal, Pau|||0000-0001-8292-8272
  • Domínguez Garcia, José Luis
  • Molins i Borrell, Climent|||0000-0001-8292-0473
Mooring design is critical to the cost-efficiency of floating offshore wind projects located in deeper waters. This work presents a frequency-domain mooring-optimization framework for floating platforms that enables rapid concept mooring design screening and constraint checks, minimizing early-stage CAPEX. DLC 1.6 and DLC 1.2 are assessed for Ultimate Limit State and Fatigue Limit State, respectively, by Orcaflex’ frequency-domain module. An adaptive particle swarm optimization algorithm is developed in Python, featuring neighborhood regrouping and informed by variable constraint correlations to guide efficient search. The method allows independent variable settings for different line groups, supporting a wide range of materials and components. A static-dynamic stiffness model is applied to a variety of fiber ropes, with linearized integration of load-reduction devices. The methodology is applied on the WindCrete spar and Volturn-US semi-submersible, each with a 15 MW turbine under multidirectional co-aligned environmental conditions. The study moves beyond symmetric mooring assumptions, promoting line-specific, functionally targeted designs. Spars require more complex configurations, while semi-submersibles enable lower cost solutions. Anchors and chains are major cost drivers; Nylon is more economical than Polyester, and wire ropes outperform HMPE (high-modulus polyethylene) for high stiffness solutions. Load-reduction devices and buoyancy modules can be critical but are cost-sensitive. Correlation analysis reveals that especially line form, rope and forerunner chain characteristics, govern whether the mooring system becomes tension-, fatigue- or motion-critical with load-reduction devices acting as secondary tuning elements., The research leading to these results has received financial support from the Spanish Ministry of Science and Innovation, subsidized by CDTI through the TRANSMISIONES 2023 program under the OPTIMAR project with grant agreement PLEC2023-010352, and under the “Investigo” grant 2022 C23-I01-P03-S00200000022, and from CERCA, the Catalan research center institution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Optimal design of single point moorings for a weathervaning floating wind twin-turbine platform in real bathymetries

  • Kallinger, Magnus Daniel
  • Pozo González, Héctor del
  • Domínguez García, Jose Luís
  • Fernandez Quijano, Javier
This article presents the design and optimization of the mooring system for a floating wind platform inspired by W2Power, which incorporates two wind turbines on a semi-submersible structure that weathervanes using a single-point mooring (SPM) system. Although several industrial concepts have adopted SPM configurations, research on their performance remains limited. This work addresses that gap by developing and applying a set of optimization strategies for the mooring system of such a platform using OrcaFlex, with the objective of minimizing the capital expenditure while satisfying Ultimate Limit State (ULS) and Fatigue Limit State (FLS) cases. The methodology was tested across two distinct marine environments: the Atlantic (Gran Canaria, GC-1) and the Mediterranean (Catalonia, LEBA-1), both characterized by their irregular bathymetry. In Catalonia, the environmental conditions are almost omnidirectional, while the platform in Gran Canaria is exposed to highly unidirectional loads. The article presents the most cost-effective solution for single-point moorings with three, four, and five lines in each case. Results demonstrate the viability of SPM-based floating wind systems with twin-turbines under diverse site conditions., The research leading to these results has received financial support from the Spanish Ministry of Science and Innovation, subsidized by CDTI through the TRANSMISIONES 2023 program under the OPTIMAR project with grant agreement PLEC2023-010352., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Mooring- and motion-aware IA cable routing for floating offshore wind farms

  • Kallinger, Magnus Daniel
  • Vilajuana Llorente, Sergi|||0009-0000-2371-0126
  • Rapha, Jose Ignacio
  • Trubat Casal, Pau|||0000-0001-8292-8272
  • Pozo González, Héctor del
  • Domínguez García, Jose Luís
Floating offshore wind farms (FOWFs) increasingly depend on dynamic inter-array (IA) cables routed through congested subsea corridors shaped by moorings, anchor patterns, and complex bathymetry. Most IA optimisation frameworks adapt fixed-bottom methods, modelling cables as 2D lines and enforcing station-keeping with coarse clearance rules. Building on the LCOE-driven layout and routing framework of existing works, this article introduces a physically informed, mooring- and motion-aware IA routing approach for FOWFs. A graph-based 3D seabed router is coupled with: (i) multiple floater offset states and their corresponding mooring configurations; (ii) explicit geometric interaction checks between moorings and dynamic cable sections; and (iii) dynamic-cable motion footprints derived from environmental conditions. The method enforces touchdown-point exclusivity, verifies bend-radius constraints at touchdown, and evaluates route feasibility and length directly on the seabed. Routing is embedded in a hybrid continuous–discrete particle swarm optimisation, where clustered minimum-spanning trees generate candidate radial topologies. The proposed router replaces detour-factor length surrogates and post-processed crossing checks with in-routing feasibility enforcement and accurate length evaluation for both IA and export cables. Tests on representative farm scales show 2%–4% reductions in IA cable length and CAPEX versus prior approaches, alongside lower embodied carbon intensity. Export routing is weakly coupled to IA routing for perimeter substations, but strongly coupled for centralised substations, where export corridors must traverse congested collector regions. LCOE gains are modest but correspond to multi-million-euro savings., The research leading to these results has received financial support from the Spanish Ministry of Science and Innovation, subsidized by CDTI through the TRANSMISIONES 2023 program under the OPTIMAR project with grant agreement PLEC2023-010352, and from CERCA, the Catalan research center institution., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Holistic optimization and comparison of mooring systems for floating offshore wind turbines

  • Kallinger, Magnus Daniel
  • Del Pozo González, Héctor
  • Trubat Casal, Pau
  • Domínguez Garcia, José Luis
  • Molins i Borrell, Climent
Mooring design is critical to the cost-efficiency of floating offshore wind projects located in deeper waters. This work presents a frequency-domain mooring-optimization framework for floating platforms that enables rapid concept mooring design screening and constraint checks, minimizing early-stage CAPEX. DLC 1.6 and DLC 1.2 are assessed for Ultimate Limit State and Fatigue Limit State, respectively, by Orcaflex’ frequency-domain module. An adaptive particle swarm optimization algorithm is developed in Python, featuring neighborhood regrouping and informed by variable constraint correlations to guide efficient search. The method allows independent variable settings for different line groups, supporting a wide range of materials and components. A static-dynamic stiffness model is applied to a variety of fiber ropes, with linearized integration of load-reduction devices. The methodology is applied on the WindCrete spar and Volturn-US semi-submersible, each with a 15 MW turbine under multidirectional co-aligned environmental conditions. The study moves beyond symmetric mooring assumptions, promoting line-specific, functionally targeted designs. Spars require more complex configurations, while semi-submersibles enable lower cost solutions. Anchors and chains are major cost drivers; Nylon is more economical than Polyester, and wire ropes outperform HMPE (high-modulus polyethylene) for high stiffness solutions. Load-reduction devices and buoyancy modules can be critical but are cost-sensitive. Correlation analysis reveals that especially line form, rope and forerunner chain characteristics, govern whether the mooring system becomes tension-, fatigue- or motion-critical with load-reduction devices acting as secondary tuning elements., The research leading to these results has received financial support from the Spanish Ministry of Science and Innovation, subsidized by CDTI through the TRANSMISIONES 2023 program under the OPTIMAR project with grant agreement PLEC2023-010352, and under the “Investigo” grant 2022 C23-I01-P03-S00200000022, and from CERCA, the Catalan research center institution., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Mooring- and motion-aware IA cable routing for floating offshore wind farms

  • Kallinger, Magnus Daniel
  • Vilajuana Llorente, Sergi
  • Rapha, Jose Ignacio
  • Trubat Casal, Pau
  • Del Pozo González, Héctor
  • Domínguez García, Jose Luís
Floating offshore wind farms (FOWFs) increasingly depend on dynamic inter-array (IA) cables routed through congested subsea corridors shaped by moorings, anchor patterns, and complex bathymetry. Most IA optimisation frameworks adapt fixed-bottom methods, modelling cables as 2D lines and enforcing station-keeping with coarse clearance rules. Building on the LCOE-driven layout and routing framework of existing works, this article introduces a physically informed, mooring- and motion-aware IA routing approach for FOWFs. A graph-based 3D seabed router is coupled with: (i) multiple floater offset states and their corresponding mooring configurations; (ii) explicit geometric interaction checks between moorings and dynamic cable sections; and (iii) dynamic-cable motion footprints derived from environmental conditions. The method enforces touchdown-point exclusivity, verifies bend-radius constraints at touchdown, and evaluates route feasibility and length directly on the seabed. Routing is embedded in a hybrid continuous–discrete particle swarm optimisation, where clustered minimum-spanning trees generate candidate radial topologies. The proposed router replaces detour-factor length surrogates and post-processed crossing checks with in-routing feasibility enforcement and accurate length evaluation for both IA and export cables. Tests on representative farm scales show 2%–4% reductions in IA cable length and CAPEX versus prior approaches, alongside lower embodied carbon intensity. Export routing is weakly coupled to IA routing for perimeter substations, but strongly coupled for centralised substations, where export corridors must traverse congested collector regions. LCOE gains are modest but correspond to multi-million-euro savings., The research leading to these results has received financial support from the Spanish Ministry of Science and Innovation, subsidized by CDTI through the TRANSMISIONES 2023 program under the OPTIMAR project with grant agreement PLEC2023-010352, and from CERCA, the Catalan research center institution., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Optimal design of single point moorings for a weathervaning floating wind twin-turbine platform in real bathymetries

  • Kallinger, Magnus Daniel
  • Del Pozo González, Héctor
  • Domínguez García, Jose Luís
  • Fernandez Quijano, Javier
This article presents the design and optimization of the mooring system for a floating wind platform inspired by W2Power, which incorporates two wind turbines on a semi-submersible structure that weathervanes using a single-point mooring (SPM) system. Although several industrial concepts have adopted SPM configurations, research on their performance remains limited. This work addresses that gap by developing and applying a set of optimization strategies for the mooring system of such a platform using OrcaFlex, with the objective of minimizing the capital expenditure while satisfying Ultimate Limit State (ULS) and Fatigue Limit State (FLS) cases. The methodology was tested across two distinct marine environments: the Atlantic (Gran Canaria, GC-1) and the Mediterranean (Catalonia, LEBA-1), both characterized by their irregular bathymetry. In Catalonia, the environmental conditions are almost omnidirectional, while the platform in Gran Canaria is exposed to highly unidirectional loads. The article presents the most cost-effective solution for single-point moorings with three, four, and five lines in each case. Results demonstrate the viability of SPM-based floating wind systems with twin-turbines under diverse site conditions., The research leading to these results has received financial support from the Spanish Ministry of Science and Innovation, subsidized by CDTI through the TRANSMISIONES 2023 program under the OPTIMAR project with grant agreement PLEC2023-010352., Peer Reviewed, Postprint (published version)