Skip to main content

ENVASE ACTIVO MULTICAPA TERMOFORMABLE DE ALTA BARRERA BASADO EN ECONOMIA BIOCIRCULAR

PRE2019-091448

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Formación
Call Contratos Predoctorales
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT JAUME I DE CASTELLO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development and Characterization of Fully Renewable and Biodegradable Polyhydroxyalkanoate Blends with Improved Thermoformability

  • Feijoo, Patricia
  • Samaniego-Aguilar, Kerly
  • Sánchez-Safont, Estefanía
  • Lagaron, Jose M.
  • Gamez-Perez, Jose
  • Cabedo, Luis
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Poly(3-hydroxybutyrate-co-3-valerate) (PHBV), being one of the most studied and commercially available polyhydroxyalkanoates (PHAs), presents an intrinsic brittleness and narrow processing window that currently hinders its use in several plastic applications. The aim of this study was to develop a biodegradable PHA-based blend by combining PHBV with poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH), another copolyester of the PHA family that shows a more ductile behavior. Blends of PHBV with 20% wt., 30% wt., and 40% wt. of PHBH were obtained by melt mixing, processed by cast extrusion in the form of films, and characterized in terms of their morphology, crystallization behavior, thermal stability, mechanical properties, and thermoformability. Full miscibility of both biopolymers was observed in the amorphous phase due to the presence of a single delta peak, ranging from 4.5 degrees C to 13.7 degrees C. Moreover, the incorporation of PHBH hindered the crystallization process of PHBV by decreasing the spherulite growth rate from 1.0 mu m/min to 0.3 mu m/min. However, for the entire composition range studied, the high brittleness of the resulting materials remained since the presence of PHBH did not prevent the PHBV crystalline phase from governing the mechanical behavior of the blend. Interestingly, the addition of PHBH greatly improved the thermoformability by widening the processing window of PHBV by 7 s, as a result of the increase in the melt strength of the blends even for the lowest PHBH content., This research was supported by MCIN/AEI/10.13039/501100011033 and FEDER "Una manera de hacer Europa", project number RTI2018-097249-B-C21. Moreover, this work has also been granted with the financial support of the Generalitat Valenciana (project AICO/2021/045), H2020 EU Project YPACK (H2020-SFS-2017-1, Reference 773872) and by the Universitat Jaume I (project UJI-B2019-44). K.S-A. would like to acknowledge the MCIN/AEI/10.13039/501100011033 and FSE "El FSE invierte en tu futuro" for their FPI fellowship (PRE2019-091448). S.T-G. acknowledges the Spanish Ministry of Science, Innovation and Universities (MICIU) for the funding received during their Juan de la Cierva-Incorporacion contract (IJCI-2016-29675).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance Enhancement of Biopolyester Blends by Reactive Compatibilization with Maleic Anhydride-Grafted Poly(butylene succinate-co-adipate)

  • Samaniego-Aguilar, Kerly
  • Sanchez-Safont, Estefania
  • Pisa-Ripoll, Ignacio
  • Lagaron, Jose M.
  • Cabedo, Luis
  • Gamez-Perez, Jose
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Flores-Fernández, Yaiza
[EN] Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a very promising biodegradable copolyester of high interest in food packaging. Its inherent brittleness and narrow processing window make it necessary to blend it with flexible biopolyesters, such as poly(butylene succinate-co-adipate) (PBSA). However, the resultant biopolyester blends are thermodynamically immiscible, which impairs their performance and limits their applications. This study is the first to explore the use of poly(butylene succinate-co-adipate) grafted with maleic anhydride (PBS-g-MAH) as a novel reactive additive to compatibilize PHBV/PBSA blends. The compatibilizer was prepared by a reactive melt-mixing process of PBSA and maleic anhydride (MAH) using dicumyl peroxide (DCP) as an organic radical initiator, achieving a grafting degree (G(d)) of 5.4%. Biopolyester blend films were thereafter prepared via cast extrusion and their morphological, thermal, mechanical, and barrier properties were characterized. Compatibilization by PBSA-g-MAH was confirmed by observing an improved phase interaction and lower dispersed domain sizes in the blends with 15 wt% PBSA. These compatibilized PHBV/PBSA blends were thermally stable up to 285 degrees C, showed enhanced ductility and toughness, as well as providing an improved barrier against water and limonene vapors and oxygen. These findings suggest that the use of MAH-grafted biopolyesters can represent an effective strategy to improve the properties of biopolyester blends and open up new opportunities for the application of PHBV-based formulations for food packaging., This research was supported by MCIN/AEI/10.13039/501100011033 and FEDER "Una manera de hacer Europa", project number PID2021-128749OB-C32. This work is also part of the project PDC2022-134006-C22, funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". Kerly Samaniego Aguilar would like to acknowledge MCIN/AEI/10.13039/501100011033 and FSE "El FSE invierte en tu futuro" for her FPI fellowship (PRE2019-091448). S.T.-G. acknowledges MICI for his Ramon y Cajal contract (RYC2019-027784-I).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Performance Enhancement of Biopolyester Blends by Reactive Compatibilization with Maleic Anhydride-Grafted Poly(butylene succinate-co-adipate)

  • Samaniego Aguilar, Kerly
  • Sánchez Safont, Estefanía
  • Pisa-Ripoll, Ignacio
  • Torres Giner, Sergio
  • Flores, Yaiza
  • Lagarón Cabello, José María
  • Cabedo, Luis
  • Gámez Pérez, José
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a very promising biodegradable copolyester of high interest in food packaging. Its inherent brittleness and narrow processing window make it necessary to blend it with flexible biopolyesters, such as poly(butylene succinate-co-adipate) (PBSA). However, the resultant biopolyester blends are thermodynamically immiscible, which impairs their performance and limits their applications. This study is the first to explore the use of poly(butylene succinate-co-adipate) grafted with maleic anhydride (PBS-g-MAH) as a novel reactive additive to compatibilize PHBV/PBSA blends. The compatibilizer was prepared by a reactive melt-mixing process of PBSA and maleic anhydride (MAH) using dicumyl peroxide (DCP) as an organic radical initiator, achieving a grafting degree (Gd) of 5.4%. Biopolyester blend films were thereafter prepared via cast extrusion and their morphological, thermal, mechanical, and barrier properties were characterized. Compatibilization by PBSA-g-MAH was confirmed by observing an improved phase interaction and lower dispersed domain sizes in the blends with 15 wt% PBSA. These compatibilized PHBV/PBSA blends were thermally stable up to 285 °C, showed enhanced ductility and toughness, as well as providing an improved barrier against water and limonene vapors and oxygen. These findings suggest that the use of MAH-grafted biopolyesters can represent an effective strategy to improve the properties of biopolyester blends and open up new opportunities for the application of PHBV-based formulations for food packaging., This research was supported by MCIN/AEI/10.13039/501100011033 and FEDER “Una manera de hacer Europa”, project number PID2021-128749OB-C32. This work is also part of the project PDC2022-134006-C22, funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Kerly Samaniego Aguilar would like to acknowledge MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro” for her FPI fellowship (PRE2019-091448). S.T.-G. acknowledges MICI for his Ramón y Cajal contract (RYC2019-027784-I)., Peer reviewed