Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Diseño de instalaciones hidráulicas experimentales con apoyo de la dinámica de fluidos computacional (CFD), Design of hydraulic installations using computational fluid dynamics (CFD)

  • Bayón, Arnau|||0000-0001-5007-0208
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
  • López Jiménez, Petra Amparo|||0000-0002-7043-3683
  • Macián Pérez, Juan Francisco
[ES] La cuantificación de pérdidas de carga causadas por elementos singulares en instalaciones hidráulicas no puede realizarse determinísticamente, por lo que debe llevarse a cabo su ensayo en laboratorio. No obstante, para el diseño del banco de ensayos es necesario estimar dichas pérdidas. En el presente trabajo, se plantea un método iterativo apoyado en un modelo de dinámica de fluidos computacional (CFD). En concreto, se emplea el caso de una instalación para un tubo Venturi y la plataforma de código abierto OpenFOAM con cierre de turbulencia Standard k-ε, obteniéndose así una instalación correctamente dimensionada para el análisis del rango de caudales deseado., [EN] The quantification of energy losses caused by singularities in hydraulic facilities cannot be deterministically conducted. To do so, laboratory tests must be performed. However, in order to design the necessary test benches, the losses to assess must be estimated. In the work presented herein, an iterative method supported by a computational fluid dynamics (CFD) model is presented. In particular, the case of facility for a Venturi tube is employed, along with the open-source code OpenFOAM, using the RNG k-¿ turbulence closure. As a result, a well-designed facility capable of supplying the desired range of flowrates is obtained, Esta investigación ha sido posible en el marco del proyecto HIDRASENSE (Plan Estatal de I+D+i MINECO, Convocatoria Retos-Colaboración 2014).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bimodal grating coupler design on SOI technology for mode division multiplexing at 1550 nm

  • García-Rodríguez, David
  • Corral, Juan L.|||0000-0003-0857-5207
  • Griol Barres, Amadeu
  • Roberto Llorente|||0000-0003-4799-2564
[EN] In this paper, we evaluate by means of simulation and experimentally the simultaneous coupling of the LP01x-LP11ax fiber modes and the TE0-TE1 nanophotonic SOI waveguide modes using a grating coupler for a two-mode fiber at 1550 nm. Both the grating width (ranging from 10 mu m to 15 mu m) and the grating vertical profile have been considered in the design procedure. The optimum design (14 mu m width and 609 nm grating period) has been selected in terms of coupling efficiency (both LP01x-TE0 and LP11ax-TE1), compactness and tolerance to lateral misalignments between fiber and coupler. The LP01x-TE0 and LP11ax-TE1 modes achieved coupling efficiencies of 49% and 45%, respectively. (C) 2017 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, Ministerio de Economia y Competitividad (MINECO/FEDER) (TEC2015-70858-C2-1-R, RTC-2014-2232-3)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the Suitability of Multicore Fiber for LTE Advanced MIMO Optical Fronthaul Systems

  • Maria Morant|||0000-0001-5565-7788
  • Macho-Ortiz, Andrés
  • Roberto Llorente|||0000-0003-4799-2564
[EN] This paper proposes and evaluates analytically and experimentally the suitability of spatial multiplexing in multicore fiber (MCF) for multiple-input multiple-output (MIMO) LTE Advanced (LTE A) optical fronthaul systems including carrier aggregation. The experimental test-bed comprises a 150-m optical fronthaul of four-core homogeneous MCF, which can be configured with different bending radius for analysis. Performance of linear crosstalk in MCF media is evaluated by simulation and validated by the experimental work in the laboratory with the radio-over-fiber transmission of full-standard LTE A wireless signals considering both SISO and MIMO configurations. The optical fronthaul analysis evaluates both same-propagation and counter-propagation spatial multiplexing, i.e., all cores propagating in the same direction and two versus two cores propagating in opposite directions, corresponding to a dual LTE A roof-mounted system. The performance of the MCF optical fronthaul system is evaluated using a single 20 MHz LTE A carrier and also carrier-aggregated signals with 16QAM and 64QAM subcarrier modulation. The experimental results indicate that intercore crosstalk (IC XT) increases up to 9.6 dB when raising the bending radius from 35 to 67 cm, being the bending radius a key parameter in MCF fronthaul systems. The demonstration performed at 1550.12 nm reported an increase of IC XT of 4.6 dB with the bending radius, which deteriorates the quality of the SISO LTE A signal up to 8.1 dB error vector magnitude (EVM). This IC XT impairment can be mitigated using 2×2 MIMO processing, which reduces the EVM impact to less than 1 dB when increasing the MCF bending radius from 35 to 67 cm. The experimental results indicate that 3GPP MIMO LTE A algorithms already in-place in the wireless LTE A standard can be used to compensate the IC XT i- the 150-m multicore optical fronthaul system with spatial multiplexing., This work was supported in part by Spain the National Plan Projects HIDRASENSE RTC-2014–2232–3 and MODAL TEC2012–38558-C02–01. The work of M. Morant was partly supported by UPV postdoc PAID-10–14 program. The work of A. Macho was also supported by BES-2013–062952 F.P.I. Grant. The research project OESED supported by Programa de Valoracion y Recursos Conjuntos de I ´ +D+I VLC/CAMPUS from Spain Ministry of Education, Culture and Sport is also acknowledged
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance Analysis of Carrier-Aggregated Multi-Antenna 4×4 MIMO LTE-A Fronthaul by Spatial Multiplexing on Multicore Fiber

  • Maria Morant|||0000-0001-5565-7788
  • Roberto Llorente|||0000-0003-4799-2564
[EN] In this paper,we experimentally propose and evaluate the performance of multiantenna LTE-Advanced (LTE-A) systems implementing multiple-input-multiple-output (MIMO) space división multiplexing on multicore fiber, compared to single-antenna single-antenna system (SISO) transmissions. Fully standard 3GPP LTE-A cellular signals are transmitted with MIMO and carrier aggregation in radio-over-fiber over a four-core fiber in different configurations. The processing capabilities of in-built 3GPP MIMO processing are evaluated experimentally in two-antenna and four-antenna LTE-A configurations and compared with single-antenna SISO performance. The robustness of 3GPP MIMO processing is analyzed over different optical paths in a four-core fiber and the optical power margin available between the four optical paths is calculated for each configuration. Finally, the transmission performance of carrier-aggregated LTE-A signals is evaluated in the four-antenna system implementing 4×4 MIMO spatial multiplexing with different carrier separation and center frequency configurations, including regulated cellular frequencies of frequency division duplex bands 7 and 20., This work was supported in part by Spain National Plan MINECO/FEDER UE TEC2015-70858-C2-1-R XCORE and RTC-2014-2232-3 HIDRASENSE. The work of M. Morant was supported by UPV postdoc PAID-10-16 Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mode Conversion for Mode Division Multiplexing at 850 nm in Standard SMF

  • García Rodríguez, David
  • Corral, Juan L.|||0000-0003-0857-5207
  • Roberto Llorente|||0000-0003-4799-2564
[EN] A mechanical mode converter for mode division multiplexed systems over SSMF at 850 nm is proposed and evaluated experimentally by the transmission of OOK-modulated optical signals. The proposed mode converter is based on a periodic structure defined by the grating period (&#923;) parameter and the number of mode coupling points, N. A mechanical grating with N=50 points and a tunable grating period (&#923; form 440 to 456 &#956;m) has been designed offering a 124-nm tuning bandwidth. The LP01 mode to LP11 mode conversion has been experimentally assessed and a conversion efficiency of 89 % has been achieved in the designed device. Optical transmission of OOK-modulated signals with 1.25 and 2.5 Gb/s bitrates on LP01 mode or a converted LP11 mode is demonstrated achieving BER < 10&#8722;9 after 1-km optical transmission over SSMF at 850 nm, This work was supported in part by the Spanish Ministerio de Economia y Competitividad MINECO/FEDER, European Union under Project TEC2015-70858-C2-1-R XCORE and in part by MINECO under Project RTC-2014-2232-3 HIDRASENSE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Next-Generation Optical Fronthaul Systems Using Multicore Fiber Media

  • Macho-Ortiz, Andrés
  • Maria Morant|||0000-0001-5565-7788
  • Roberto Llorente|||0000-0003-4799-2564
This paper proposes and investigates the use of multicore fiber (MCF) media performing space-division multiplexed transmission for next-generation optical fronthaul systems. We report the experimental demonstration of combined radio-over-fiber (RoF) transmission of full-standard LTE-Advanced (LTE-A) and WiMAX signals providing fronthaul connectivity in 150m of 4-core fiber (4CF), transmitting simultaneously fully independent wireless services. Operating in linear and nonlinear optical power regimes, the experimental evaluation verifies that the error vector magnitude (EVM) is not degraded when intercore and intracore Kerr nonlinearities are excited in MCF with high input power levels. As a result, nonlinear regime is proposed as a key factor to reduce the temporal EVM fluctuation induced by the random nature of the intercore crosstalk in MCF. In addition, MCF fronthaul applied to converged fiber-wireless polarization multiplexed passive optical networks is demonstrated to transmit LTE-A and WiMAX signals over two orthogonal optical polarizations. The polarization-multiplexed signal is transmitted in RoF over 25.2 km of standard single-mode fiber and then demultiplexed and injected in different cores of the 4CF to provide fronthaul connectivity. Finally, the extension of multicore optical fronthaul capacity is proposed using MIMO LTE-A signals. The tolerance of the MIMO LTE-A RoF transmissions to in-band crosstalk is reported and compared to single-input single-output (SISO) configuration. The experimental results indicate that MIMO configuration is more tolerant than SISO to in-band crosstalk considering both internal and external interferences. MIMO and SISO configurations are compared when transmitted in RoF over a 4CF operating in linear and nonlinear regimes and core interleaving nonlinear stimulation is proposed to reduce the temporal and spectral EVM fluctuation when the same wireless standard is propagated in each core., This work was supported in part by Spain the National Plan Project XCORE TEC2015-70858-C2-1-R and RTC-2014-2232-3 HIDRASENSE. The work of A. Macho was supported by BES-2013-062952 F.P.I. Grant. The work of M. Morant was supported in part by UPV postdoc PAID-10-14 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dimensional variation tolerant mode converter/multiplexer fabricated in SOI technology for two-mode transmission at 1550 nm

  • García-Rodríguez, David
  • Corral, Juan L.|||0000-0003-0857-5207
  • Griol Barres, Amadeu
  • Roberto Llorente|||0000-0003-4799-2564
The use of an integrated asymmetrical directional coupler for two-mode transmission at 1550 nm is analyzed. The design is based on silicon-on-insulator (SOI) technology and permits mode conversion and mode multiplexing/demultiplexing. In the nominal design, mode conversion and mode (de) multiplexing are achieved with 97% efficiency and a 23.4 dB crosstalk level in the 1540-1560 nm band using a 0.1 mu m gap. The dimension tolerance of the SOI process has been taken into account in the selection of the optimum design, and the coupling efficiency would remain above 82.3% (corresponding to 0.8 dB excess loss) with 3 sigma accuracy. A 90% efficiency has been experimentally obtained., Ministerio de Economia y Competitividad (MINECO) (TEC2015-70858-C2-1-R, RTC-2014-2232-3).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design of asymmetrical directional couplers on ridge and strip SOI technology with high-dimensional variation tolerance

  • García-Rodríguez, David
  • Corral, Juan L.|||0000-0003-0857-5207
  • Roberto Llorente|||0000-0003-4799-2564
[EN] The supermode analysis of asymmetrical directional couplers (ADC) based on SOI technology for strip and ridge structures at 1550 nm is herein reported, targeting to reduce ADC device fabrication requirements. The reported analysis based on supermodes permits us to assess the sensitivity of the ADC coupling efficiency by calculating the index difference between even and odd supermodes. Optimum designs have been found for 100 and 400 nm gaps, respectively, capable of converting and (de) multiplexing both TE0 and TE1 modes taking into account the width, gap, height, and slab thickness variations produced with respect to the nominal design. (C) 2018 Optical Society of America, Ministerio de Economia y Competitividad (MINECO) (TEC2015-70858-C2-1-R, RTC-2014-2232-3).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Supersymmetric Transformations in Optical Fibers

  • Macho-Ortiz, Andrés
  • Roberto Llorente|||0000-0003-4799-2564
  • García Meca, Carlos
[EN] Supersymmetry (SUSY) has recently emerged as a tool to design unique optical structures with degenerate spectra. Here, we study several fundamental aspects and variants of one-dimensional SUSY in axially symmetric optical media, including their basic spectral features and the conditions for degeneracy breaking. Surprisingly, we find that the SUSY degeneracy theorem is partially (totally) violated in optical systems connected by isospectral (broken) SUSY transformations due to a degradation of the paraxial approximation. In addition, we show that isospectral constructions provide a dimension-independent design control over the group delay in SUSY fibers. Moreover, we find that the studied unbroken and isospectral SUSY transformations allow us to generate refractive-index superpartners with an extremely large phase-matching bandwidth spanning the S þ C þ L optical bands. These singular features define a class of optical fibers with a number of potential applications. To illustrate this, we numerically demonstrate the possibility of building photonic lanterns supporting broadband heterogeneous supermodes with large effective area, a broadband all-fiber true-mode (de)multiplexer requiring no mode conversion, and different mode-filtering, mode-conversion, and pulse-shaping devices. Finally, we discuss the possibility of extrapolating our results to acoustics and quantum mechanics., We thank Sergio Lechago for his valuable help with the numerical simulations. This work is supported by Spanish National Plan projects [No. MINECO/FEDER UE XCORE TEC2015-70858-C2-1-R, No. PHUTURE TEC2015-73581-JIN (AEI/FEDER, UE), and No. HIDRASENSE RTC-2014-2232-3]. A.M.'s work is supported by F.P.I. Grant No. BES-2013-062952.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Birefringence effects in multi-core fiber: coupled local-mode theory

  • Macho-Ortiz, Andrés
  • Maria Morant|||0000-0001-5565-7788
  • Roberto Llorente|||0000-0003-4799-2564
  • García Meca, Carlos
  • Fraile-Peláez, F. Javier
In this paper, we evaluate experimentally and model theoretically the intra- and inter-core crosstalk between the polarized core modes in single-mode multi-core fiber media including temporal and longitudinal birefringent effects. Specifically, extensive experimental results on a four-core fiber indicate that the temporal fluctuation of fiber birefringence modifies the intra- and inter-core crosstalk behavior in both linear and nonlinear optical power regimes. To gain theoretical insight into the experimental results, we introduce an accurate multi-core fiber model based on local modes and perturbation theory, which is derived from the Maxwell equations including both longitudinal and temporal birefringent effects. Numerical calculations based on the developed theory are found to be in good agreement with the experimental data., This work has been partly funded by Spain National Plan project MINECO/FEDER UE XCORE TEC2015-70858-C2-1-R; HIDRASENSE RTC-2014-2232-3; European Regional Development Fund (ERDF) and the Galician Regional Government under project GRC2015/018. A. Macho and M. Morant work was supported by BES-2013-062952 F.P.I. Grant and postdoc UPV PAID-10-14 program, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modal Selectivity at 850 nm employing Standard Single-Mode Couplers: Theory and Experimental Demonstration

  • García-Rodríguez, David
  • Maria Morant|||0000-0001-5565-7788
  • Corral, Juan L.|||0000-0003-0857-5207
  • Roberto Llorente|||0000-0003-4799-2564
[EN] In this paper, we evaluate experimentally and analyze theoretically and by simulation the demultiplexing of LP01 and LP11 modes in a 850 nm few mode optical link when a standard single-mode coupler theoretically designed for 1550 nm operation is used. The simulation analysis indicates a feasible conversion efficiency higher than 98% for the LP01 mode and 100% efficiency for LP11 mode. These results are experimentally validated considering different off-the-shelf optical couplers configured in 99:1, 90:10, 80:20 and 60:40 coupling ratios. Experimental analysis of the optical couplers demonstrate adequate functionality in correspondence with the theoretical analysis, exhibiting a good near-field pattern and modal profile for the LP01 and LP11 modes. The mode purity observed was 98.4% for the LP01 mode, and higher than 90% for the LP11 mode. The 90:10 optical coupler configuration shows best mode purity with the minimal insertion losses., This work was supported by the Ministerio de Economia y Competitividad (MINECO/FEDER), Spain (grant numbers TEC2015-70858-C2-1-R and RTC-2014-2232-3).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Unified Model of Linear and Nonlinear Crosstalk in Multi-Core Fiber

  • Macho-Ortiz, Andrés
  • Maria Morant|||0000-0001-5565-7788
  • Roberto Llorente|||0000-0003-4799-2564
In this paper, the theoretical unification of linear and nonlinear inter-core crosstalk (IC-XT) in step-index single-mode multicore fiber (MCF) media is reported and validated experimentally. In order to estimate the IC-XT when operating in linear and nonlinear regimes, the coupled-mode theory (CMT) and the coupled-power theory (CPT) have been unified in both power regimes. The theoretical analysis of the CMT indicates that in coupled MCFs with reduced core-to-core distance (core pitch) the nonlinear self-coupling and cross-coupling effects should be considered when operating with high optical powers. However, considering a core pitch value higher than three times the core radius only the self-coupling effect should be taken into account for estimating the nonlinear IC-XT. Considering these results, the CPT is also extended to nonlinear regime including the dominant nonlinear coupling effect. Using both CMT and CPT, the statistical model of nonlinear IC-XT is completed with the closed-form expressions for estimating the cumulative distribution function, the probability density function and the crosstalk mean and variance as a function of the power level launched into a single-core of the MCF. The crosstalkmodel presented is additionally extended when multiple cores are simultaneously excited. Finally, the theoretical model is experimentally validated in a homogeneous four-core fiber considering different bending radius configurations., This work was supported by Spain the National Plan Project TEC2015-70858-C2-1-R XCORE and RTC-2014-2232-3 HIDRASENSE. The work of A. Macho was supported by BES-2013-062952 F.P.I. Grant. M. Morant was partly supported by UPV postdoc PAID-10-14 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mode-selective couplers for two-mode transmission at 850 nm in standard SMF

  • Corral, Juan L.|||0000-0003-0857-5207
  • Roberto Llorente|||0000-0003-4799-2564
  • García Rodríguez, David
The optimal design of a low-loss fused fiber mode-selective coupler for two-mode fiber transmission in the 850-nm band is presented. The coupler is based on precise phase matching of the propagation constants in each arm of a weakly fused fiber coupler. The designed component permits both mode converter and mode multiplexer/demultiplexer operation, thus enabling modal multiplexing transmission in this band with no additional component. The presented design is evaluated by simulation considering two types of structures, leading to asymmetric and symmetric coupler configurations. Mode converter and mode multiplexer operation is achieved with 93.5% efficiency in the band of 845 855 nm. Mode demultiplexer operation is achieved with an extinction ratio better than 20.4 dB in the same band., This work was supported by the Spanish Ministerio de Economia y Competitividad under Project RTC-2014-2232-3 HIDRASENSE and Project TEC2012-38558-C02-01.