Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Chromosomal positioning in spermatogenic cells is influenced by chromosomal factors associated with gene activity, bouquet formation and meiotic sex chromosome inactivation

  • Solé Canal, Mireia|||0000-0002-6054-0071
  • Blanco, Joan|||0000-0003-0647-3856
  • Gil, Debora|||0000-0002-2770-4767
  • Valero, O.
  • Pascual, Á
  • Cárdenas, B.
  • Fonseka, Gothami
  • Anton, Ester|||0000-0002-8914-2667
  • Frodsham, Richard
  • Vidal, Francesca|||0000-0002-0985-7348
  • Sarrate Navas, Zaida|||0000-0001-9677-1376
Chromosome territoriality is not random along the cell cycle and it is mainly governed by intrinsic chromosome factors and gene expression patterns. Conversely, very few studies have explored the factors that determine chromosome territoriality and its influencing factors during meiosis. In this study, we analysed chromosome positioning in murine spermatogenic cells using three-dimensionally fluorescence in situ hybridization-based methodology, which allows the analysis of the entire karyotype. The main objective of the study was to decipher chromosome positioning in a radial axis (all analysed germ-cell nuclei) and longitudinal axis (only spermatozoa) and to identify the chromosomal factors that regulate such an arrangement. Results demonstrated that the radial positioning of chromosomes during spermatogenesis was cell-type specific and influenced by chromosomal factors associated to gene activity. Chromosomes with specific features that enhance transcription (high GC content, high gene density and high numbers of predicted expressed genes) were preferentially observed in the inner part of the nucleus in virtually all cell types. Moreover, the position of the sex chromosomes was influenced by their transcriptional status, from the periphery of the nucleus when its activity was repressed (pachytene) to a more internal position when it is partially activated (spermatid). At pachytene, chromosome positioning was also influenced by chromosome size due to the bouquet formation. Longitudinal chromosome positioning in the sperm nucleus was not random either, suggesting the importance of ordered longitudinal positioning for the release and activation of the paternal genome after fertilisation.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

A cost minimization analysis of the implementation of the international lung screening trial in Catalonia (Spain)

  • Rosell, Antoni
  • Baeza, Sonia
  • Mouriño, Rocío
  • Saigí, Maria
  • Munné, Marta
  • López de Castro, Pedro
  • Bechini, Jordi
  • Estrada Cuxart, Oriol
  • Ara del Rey, Jordi
  • Ricou Ríos, Laura
  • López Seguí, Francesc, 1991-
Background NLST and NELSON trial showed that lung cancer mortality can be reduced by 20-24% using low-dose computed tomography screening, due to an increase in early-stage diagnoses. Research question How much lung cancer-related direct costs may be reduced using low-dose computed tomography screening based on the ILST-protocol in a public healthcare system? Methods Cost analysis of lung cancer screening vs. usual care in the framework of the retail price of the Catalan public healthcare system. The lung cancer screening group included costs of screening (ILST-protocol), treatment cost according to weighted average distribution of TNM staging in the NLST and NELSON trials, lung cancer detection rate and smoking-cessation intervention. The usual care group included treatment costs based on distribution of TNM staging registered in the Spanish index hospital. Results In the usual care group, treatment costs were €91,959. In 5-year of lung cancer screening program, the average expected costs per subject were €1,342 (range €1,054-1,832) for screening and €32,431 for treatment, with an expected reduction of €952 based on an average cancer detection rate of 1.6%. The decrease in cost resulting from the stage shift offsets 70.6% of the costs of the screening program. Conclusions The decrease in direct costs associated with lung cancer treatment due to a stage shift resulting from LCS of high-risk populations compensates for a substantial part of the LCS program costs., This work was supported by MINECO [Núm. Expedient: RTI2018-095209-B-C21-22]; Barcelona Respitatory Network (BRN)- Fundació Ramon Pla i Armengol; "Clinical project" grant, Fundació Acadèmia Ciències Mèdiques de Catalunya i de Balears; "Talents" grant 2020, Fundació La Pedrera and Hospital Universitari Germans Trias i Pujol.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

RisCO2: Implementation and Performance Evaluation of RISC-V Processors for Low-Power CO2 Concentration Sensing

  • Núñez-Prieto, Ricardo
  • Castells-Rufas, David
  • Terés, Lluís
In the field of embedded systems, energy efficiency is a critical requirement, particularly for battery-powered devices. RISC-V processors have gained popularity due to their flexibility and open-source nature, making them an attractive choice for embedded applications. However, not all RISC-V processors are equally energy-efficient, and evaluating their performance in specific use cases is essential. This paper presents RisCO2, an RISC-V implementation optimized for energy efficiency. It evaluates its performance compared to other RISC-V processors in terms of resource utilization and energy consumption in a signal processing application for nondispersive infrared (NDIR) CO2 sensors.The processors were implemented in the PULPino SoC and synthesized using Vivado IDE. RisCO2 is based on the RV32E_Zfinx instruction set and was designed from scratch by the authors specifically for low-power signal demodulation in CO2 NDIR sensors. The other processors are Ri5cy, Micro-riscy, and Zero-riscy, developed by the PULP team, and CV32E40P (derived from Ri5cy) from the OpenHW Group, all of them widely used in the RISC-V community. Our experiments showed that RisCO2 had the lowest energy consumption among the five processors, with a 53.5% reduction in energy consumption compared to CV32E40P and a 94.8% reduction compared to Micro-riscy. Additionally, RisCO2 had the lowest FPGA resource utilization compared to the best-performing processors, CV32E40P and Ri5cy, with a 46.1% and a 59% reduction in LUTs, respectively. Our findings suggest that RisCO2 is a highly energy-efficient RISC-V processor for NDIR CO2 sensors that require signal demodulation to enhance the accuracy of the measurements. The results also highlight the importance of evaluating processors in specific use cases to identify the most energy-efficient option. This paper provides valuable insights for designers of energy-efficient embedded systems using RISC-V processors., This work is partially funded by the Catalan Government industrial Ph.D. programme under grant 2019-DI-056 and by the Spanish Ministry of Science, Innovation, and Universities under grant RTI2018-095209-B-C22. This research is also part of the activity of the Catalan Government Research Group 2021SGR01623 (CICS, Costume Intelligent Computing Systems)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A cost minimization analysis of the implementation of the international lung screening trial in Catalonia (Spain)

  • Rosell, Antoni
  • Baeza, Sonia
  • Mouriño, Rocío
  • Saigí, Maria
  • Munné, Marta
  • López de Castro, Pedro
  • Bechini, Jordi
  • Estrada Cuxart, Oriol
  • Ara del Rey, Jordi
  • Ricou Ríos, Laura
  • López Seguí, Francesc, 1991-
Background NLST and NELSON trial showed that lung cancer mortality can be reduced by 20-24% using low-dose computed tomography screening, due to an increase in early-stage diagnoses. Research question How much lung cancer-related direct costs may be reduced using low-dose computed tomography screening based on the ILST-protocol in a public healthcare system? Methods Cost analysis of lung cancer screening vs. usual care in the framework of the retail price of the Catalan public healthcare system. The lung cancer screening group included costs of screening (ILST-protocol), treatment cost according to weighted average distribution of TNM staging in the NLST and NELSON trials, lung cancer detection rate and smoking-cessation intervention. The usual care group included treatment costs based on distribution of TNM staging registered in the Spanish index hospital. Results In the usual care group, treatment costs were €91,959. In 5-year of lung cancer screening program, the average expected costs per subject were €1,342 (range €1,054-1,832) for screening and €32,431 for treatment, with an expected reduction of €952 based on an average cancer detection rate of 1.6%. The decrease in cost resulting from the stage shift offsets 70.6% of the costs of the screening program. Conclusions The decrease in direct costs associated with lung cancer treatment due to a stage shift resulting from LCS of high-risk populations compensates for a substantial part of the LCS program costs., This work was supported by MINECO [Núm. Expedient: RTI2018-095209-B-C21-22]; Barcelona Respitatory Network (BRN)- Fundació Ramon Pla i Armengol; "Clinical project" grant, Fundació Acadèmia Ciències Mèdiques de Catalunya i de Balears; "Talents" grant 2020, Fundació La Pedrera and Hospital Universitari Germans Trias i Pujol.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Segmentation of distal airways using structural analysis

  • Gil, Debora|||0000-0002-2770-4767
  • Sánchez Ramos, Carles|||0000-0003-3435-9882
  • Borràs, Agnés|||0000-0002-7747-9924
  • Diez-Ferrer, Marta|||0000-0002-0207-8157
  • Rosell Gratacos, Antoni|||0000-0003-0877-7191
Segmentation of airways in Computed Tomography (CT) scans is a must for accurate support of diagnosis and intervention of many pulmonary disorders. In particular, lung cancer diagnosis would benefit from segmentations reaching most distal airways. We present a method that combines descriptors of bronchi local appearance and graph global structural analysis to fine-tune thresholds on the descriptors adapted for each bronchial level. We have compared our method to the top performers of the EXACT09 challenge and to a commercial software for biopsy planning evaluated in an own-collected data-base of high resolution CT scans acquired under different breathing conditions. Results on EXACT09 data show that our method provides a high leakage reduction with minimum loss in airway detection. Results on our data-base show the reliability across varying breathing conditions and a competitive performance for biopsy planning compared to a commercial solution. Copyright:.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Recognition of the Mental Workloads of Pilots in the Cockpit Using EEG Signals

  • Hernández-Sabaté, Aura|||0000-0003-1563-9934
  • Yauri Vidalón, José Elías|||0000-0001-6287-7797
  • Folch, Pau
  • Piera, Miquel Àngel|||0000-0002-7227-7944
  • Gil, Debora|||0000-0002-2770-4767
The commercial flightdeck is a naturally multi-tasking work environment, one in which interruptions are frequent come in various forms, contributing in many cases to aviation incident reports. Automatic characterization of pilots' workloads is essential to preventing these kind of incidents. In addition, minimizing the physiological sensor network as much as possible remains both a challenge and a requirement. Electroencephalogram (EEG) signals have shown high correlations with specific cognitive and mental states, such as workload. However, there is not enough evidence in the literature to validate how well models generalize in cases of new subjects performing tasks with workloads similar to the ones included during the model's training. In this paper, we propose a convolutional neural network to classify EEG features across different mental workloads in a continuous performance task test that partly measures working memory and working memory capacity. Our model is valid at the general population level and it is able to transfer task learning to pilot mental workload recognition in a simulated operational environment.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Intraoperative Extraction of Airways Anatomy in VideoBronchoscopy

  • Gil, Debora|||0000-0002-2770-4767
  • Esteban Lansaque, Antonio
  • Borràs, Agnés|||0000-0002-7747-9924
  • Ramírez, Esmitt|||0000-0001-7573-631X
  • Sánchez Ramos, Carles|||0000-0003-3435-9882
A main bottleneck in bronchoscopic biopsy sampling is to efficiently reach the lesion navigating across bronchial levels. Any guidance system should be able to localize the scope position during the intervention with minimal costs and alteration of clinical protocols. With the final goal of an affordable image-based guidance, this work presents a novel strategy to extract and codify the anatomical structure of bronchi, as well as, the scope navigation path from videobronchoscopy. Experiments using interventional data show that our method accurately identifies the bronchial structure. Meanwhile, experiments using simulated data verify that the extracted navigation path matches the 3D route.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

An Intelligent Radiomic Approach for Lung Cancer Screening

  • Torres, Guillermo|||0000-0002-1576-6178
  • Baeza, Sonia|||0000-0001-6612-6018
  • Sánchez Ramos, Carles|||0000-0003-3435-9882
  • Guasch, Ignasi|||0000-0001-7320-5822
  • Rosell, Antoni|||0000-0003-0877-7191
  • Gil, Debora|||0000-0002-2770-4767
The efficiency of lung cancer screening for reducing mortality is hindered by the high rate of false positives. Artificial intelligence applied to radiomics could help to early discard benign cases from the analysis of CT scans. The available amount of data and the fact that benign cases are a minority, constitutes a main challenge for the successful use of state of the art methods (like deep learning), which can be biased, over-fitted and lack of clinical reproducibility. We present an hybrid approach combining the potential of radiomic features to characterize nodules in CT scans and the generalization of the feed forward networks. In order to obtain maximal reproducibility with minimal training data, we propose an embedding of nodules based on the statistical significance of radiomic features for malignancy detection. This representation space of lesions is the input to a feed forward network, which architecture and hyperparameters are optimized using own-defined metrics of the diagnostic power of the whole system. Results of the best model on an independent set of patients achieve 100% of sensitivity and 83% of specificity (AUC = 0.94) for malignancy detection.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mental Workload Detection Based on EEG Analysis

  • Yauri Vidalón, José Elías|||0000-0001-6287-7797
  • Hernández-Sabaté, Aura|||0000-0003-1563-9934
  • Folch, Pau
  • Gil, Debora|||0000-0002-2770-4767
The study of mental workload becomes essential for human work efficiency, health conditions and to avoid accidents, since workload compromises both performance and awareness. Although workload has been widely studied using several physiological measures, minimising the sensor network as much as possible remains both a challenge and a requirement. Electroencephalogram (EEG) signals have shown a high correlation to specific cognitive and mental states like workload. However, there is not enough evidence in the literature to validate how well models generalize in case of new subjects performing tasks of a workload similar to the ones included during model's training. In this paper we propose a binary neural network to classify EEG features across different mental workloads. Two workloads, low and medium, are induced using two variants of the N-Back Test. The proposed model was validated in a dataset collected from 16 subjects and shown a high level of generalization capability: model reported an average recall of 81.81% in a leave-one-out subject evaluation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A Flexible Outlier Detector Based on a Topology Given by Graph Communities

  • Ramos Terrades, Oriol|||0000-0002-3333-8812
  • Berenguel Centeno, Albert|||0000-0002-8395-2298
  • Gil, Debora|||0000-0002-2770-4767
Outlier detection is essential for optimal performance of machine learning methods and statistical predictive models. Their detection is especially determinant in small sample size unbalanced problems, since in such settings outliers become highly influential and significantly bias models. This particular experimental settings are usual in medical applications, like diagnosis of rare pathologies, outcome of experimental personalized treatments or pandemic emergencies. In contrast to population-based methods, neighborhood based local approaches compute an outlier score from the neighbors of each sample, are simple flexible methods that have the potential to perform well in small sample size unbalanced problems. A main concern of local approaches is the impact that the computation of each sample neighborhood has on the method performance. Most approaches use a distance in the feature space to define a single neighborhood that requires careful selection of several parameters, like the number of neighbors. This work presents a local approach based on a local measure of the heterogeneity of sample labels in the feature space considered as a topological manifold. Topology is computed using the communities of a weighted graph codifying mutual nearest neighbors in the feature space. This way, we provide with a set of multiple neighborhoods able to describe the structure of complex spaces without parameter fine tuning. The extensive experiments on real-world and synthetic data sets show that our approach outperforms, both, local and global strategies in multi and single view settings.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Time to match, when do homologous chromosomes become closer?

  • Solé Canal, Mireia|||0000-0002-6054-0071
  • Blanco, Joan|||0000-0003-0647-3856
  • Gil, Debora|||0000-0002-2770-4767
  • Valero, Oliver|||0000-0003-0014-9916
  • Cárdenas, Bryan|||0000-0002-6752-7355
  • Fonseka, G.
  • Anton, Ester|||0000-0002-8914-2667
  • Pascual Bascuñana, Álvaro|||0000-0002-9821-5442
  • Frodsham, R.
  • Vidal, Francesca|||0000-0002-0985-7348
  • Sarrate Navas, Zaida|||0000-0001-9677-1376
In most eukaryotes, pairing of homologous chromosomes is an essential feature of meiosis that ensures homologous recombination and segregation. However, when the pairing process begins, it is still under investigation. Contrasting data exists in Mus musculus, since both leptotene DSB-dependent and preleptotene DSB-independent mechanisms have been described. To unravel this contention, we examined homologous pairing in pre-meiotic and meiotic Mus musculus cells using a three-dimensional fluorescence in situ hybridization-based protocol, which enables the analysis of the entire karyotype using DNA painting probes. Our data establishes in an unambiguously manner that 73.83% of homologous chromosomes are already paired at premeiotic stages (spermatogonia-early preleptotene spermatocytes). The percentage of paired homologous chromosomes increases to 84.60% at mid-preleptotene-zygotene stage, reaching 100% at pachytene stage. Importantly, our results demonstrate a high percentage of homologous pairing observed before the onset of meiosis; this pairing does not occur randomly, as the percentage was higher than that observed in somatic cells (19.47%) and between nonhomologous chromosomes (41.1%). Finally, we have also observed that premeiotic homologous pairing is asynchronous and independent of the chromosome size, GC content, or presence of NOR regions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Weather Classification by Utilizing Synthetic Data

  • Minhas, Saad|||0000-0003-1359-3389
  • Khanam, Zeba
  • Ehsan, Shoaib|||0000-0001-9631-1898
  • McDonald-Maier, Klaus|||0000-0002-6412-8519
  • Hernández-Sabaté, Aura|||0000-0003-1563-9934
Weather prediction from real-world images can be termed a complex task when targeting classification using neural networks. Moreover, the number of images throughout the available datasets can contain a huge amount of variance when comparing locations with the weather those images are representing. In this article, the capabilities of a custom built driver simulator are explored specifically to simulate a wide range of weather conditions. Moreover, the performance of a new synthetic dataset generated by the above simulator is also assessed. The results indicate that the use of synthetic datasets in conjunction with real-world datasets can increase the training efficiency of the CNNs by as much as 74%. The article paves a way forward to tackle the persistent problem of bias in vision-based datasets.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A novel intelligent radiomic analysis of perfusion SPECT/CT images to optimize pulmonary embolism diagnosis in COVID-19 patients

  • Baeza, Sonia|||0000-0001-6612-6018
  • Gil, Debora|||0000-0002-2770-4767
  • Garcia-Olivé, Ignasi|||0000-0001-7698-5107
  • Salcedo-Pujantell, Maite
  • Deportós, Jordi
  • Sánchez Ramos, Carles|||0000-0003-3435-9882
  • Torres, Guillermo|||0000-0002-1576-6178
  • Moragas, Gloria|||0000-0001-9097-0569
  • Rosell Gratacos, Antoni|||0000-0003-0877-7191
COVID-19 infection, especially in cases with pneumonia, is associated with a high rate of pulmonary embolism (PE). In patients with contraindications for CT pulmonary angiography (CTPA) or non-diagnostic CTPA, perfusion single-photon emission computed tomography/computed tomography (Q-SPECT/CT) is a diagnostic alternative. The goal of this study is to develop a radiomic diagnostic system to detect PE based only on the analysis of Q-SPECT/CT scans. This radiomic diagnostic system is based on a local analysis of Q-SPECT/CT volumes that includes both CT and Q-SPECT values for each volume point. We present a combined approach that uses radiomic features extracted from each scan as input into a fully connected classification neural network that optimizes a weighted cross-entropy loss trained to discriminate between three different types of image patterns (pixel sample level): healthy lungs (control group), PE and pneumonia. Four types of models using different configuration of parameters were tested. The proposed radiomic diagnostic system was trained on 20 patients (4,927 sets of samples of three types of image patterns) and validated in a group of 39 patients (4,410 sets of samples of three types of image patterns). In the training group, COVID-19 infection corresponded to 45% of the cases and 51.28% in the test group. In the test group, the best model for determining different types of image patterns with PE presented a sensitivity, specificity, positive predictive value and negative predictive value of 75.1%, 98.2%, 88.9% and 95.4%, respectively. The best model for detecting pneumonia presented a sensitivity, specificity, positive predictive value and negative predictive value of 94.1%, 93.6%, 85.2% and 97.6%, respectively. The area under the curve (AUC) was 0.92 for PE and 0.91 for pneumonia. When the results obtained at the pixel sample level are aggregated into regions of interest, the sensitivity of the PE increases to 85%, and all metrics improve for pneumonia. This radiomic diagnostic system was able to identify the different lung imaging patterns and is a first step toward a comprehensive intelligent radiomic system to optimize the diagnosis of PE by Q-SPECT/CT. Artificial intelligence applied to Q-SPECT/CT is a diagnostic option in patients with contraindications to CTPA or a non-diagnostic test in times of COVID-19.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

GPU acceleration of Levenshtein distance computation between long strings

  • Castells-Rufas, David|||0000-0002-7181-9705
Computing edit distance for very long strings has been hampered by quadratic time complexity with respect to string length. The WFA algorithm reduces the time complexity to a quadratic factor with respect to the edit distance between the strings. This work presents a GPU implementation of the WFA algorithm and a new optimization that can halve the elements to be computed, providing additional performance gains. The implementation allows to address the computation of the edit distance between strings having hundreds of millions of characters. The performance of the algorithm depends on the similarity between the strings. For strings longer than million characters, the performance is the best ever reported, which is above TCUPS for strings with similarities greater than 70% and above one hundred TCUPS for 99.9% similarity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

RisCO2, Implementation and Performance Evaluation of RISC-V Processors for Low-Power CO Concentration Sensing

  • Núñez Prieto, Ricardo|||0000-0002-6294-1928
  • Castells-Rufas, David|||0000-0002-7181-9705
  • Terés Terés, Lluís|||0000-0002-9263-411X
In the field of embedded systems, energy efficiency is a critical requirement, particularly for battery-powered devices. RISC-V processors have gained popularity due to their flexibility and open-source nature, making them an attractive choice for embedded applications. However, not all RISC-V processors are equally energy-efficient, and evaluating their performance in specific use cases is essential. This paper presents RisCO2, an RISC-V implementation optimized for energy efficiency. It evaluates its performance compared to other RISC-V processors in terms of resource utilization and energy consumption in a signal processing application for nondispersive infrared (NDIR) CO sensors.The processors were implemented in the PULPino SoC and synthesized using Vivado IDE. RisCO2 is based on the RV32E_Zfinx instruction set and was designed from scratch by the authors specifically for low-power signal demodulation in CO NDIR sensors. The other processors are Ri5cy, Micro-riscy, and Zero-riscy, developed by the PULP team, and CV32E40P (derived from Ri5cy) from the OpenHW Group, all of them widely used in the RISC-V community. Our experiments showed that RisCO2 had the lowest energy consumption among the five processors, with a 53.5% reduction in energy consumption compared to CV32E40P and a 94.8% reduction compared to Micro-riscy. Additionally, RisCO2 had the lowest FPGA resource utilization compared to the best-performing processors, CV32E40P and Ri5cy, with a 46.1% and a 59% reduction in LUTs, respectively. Our findings suggest that RisCO2 is a highly energy-efficient RISC-V processor for NDIR CO sensors that require signal demodulation to enhance the accuracy of the measurements. The results also highlight the importance of evaluating processors in specific use cases to identify the most energy-efficient option. This paper provides valuable insights for designers of energy-efficient embedded systems using RISC-V processors.