Skip to main content

ESTRATEGIA SOSTENIBLE DE ALTA DURABILIDAD EN HORMIGONES SOMETIDOS A AMBIENTES MARINOS A EDADES TEMPRANAS

RTI2018-100962-B-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD POLITECNICA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

L-ascorbic acid as an efficient green corrosion inhibitor of steel rebars in chloride contaminated cement mortar

  • Argiz, Cristina
  • Arroyo, Celia
  • Bravo, Astrid
  • Moragues, Amparo
  • Andrade, Carmen
  • Bolzoni, Fabio
Corrosion of reinforcement is a major problem regarding concrete durability. In new structures the corrosion onset can be delayed if additional protection methods are provided as is the case for the addition of corrosion inhibitors in the concrete mix. The main goal of this paper is the evaluation of the effect of the ascorbic acid (AA) as a green steel corrosion inhibitor in cement mortars contaminated by chlorides. Concentration levels of ascorbic acid, ranging from 0.5 to 10−3 mol/L, were added to the mixing water. Electrochemical methods, including corrosion potential (Ecorr), linear polarization resistance (LPR) and electrochemical impedance spectroscopy (EIS), were employed to assess the corrosion rate of the steel embedded in the mortars. The corrosion inhibiting performance of ascorbic acid was compared with that of sodium nitrite. The interaction of the ascorbic acid with the hydrated cement matrix was also evaluated with differential thermal and thermogravimetric analysis (DTA/TG) and pH measurements. The results indicated that, depending on the ascorbic acid concentration, it can be an activator of the corrosion process or an effective corrosion inhibitor in a similar manner to sodium nitrite. A corrosion rate decrease was achieved with concentrations below 10−2 mol/L and the optimum content was 10−3 mol/L. Within this concentration range, the AA does not modify the hydration performance of the cement matrix., This research was funded by the Ministry of Science and Innovation of Spain by means of the Research Fund Projects RTI2018-100962-B-100 and PID 2021-128616OB-100., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

L-ascorbic acid as an efficient green corrosion inhibitor of steel rebars in chloride contaminated cement mortar

  • Argiz, Cristina
  • Arroyo, Celia
  • Bravo, Astrid
  • Moragues, Amparo
  • Andrade, Carmen
  • Bolzoni, Fabio
Corrosion of reinforcement is a major problem regarding concrete durability. In new structures the corrosion onset can be delayed if additional protection methods are provided as is the case for the addition of corrosion inhibitors in the concrete mix. The main goal of this paper is the evaluation of the effect of the ascorbic acid (AA) as a green steel corrosion inhibitor in cement mortars contaminated by chlorides. Concentration levels of ascorbic acid, ranging from 0.5 to 10−3 mol/L, were added to the mixing water. Electrochemical methods, including corrosion potential (Ecorr), linear polarization resistance (LPR) and electrochemical impedance spectroscopy (EIS), were employed to assess the corrosion rate of the steel embedded in the mortars. The corrosion inhibiting performance of ascorbic acid was compared with that of sodium nitrite. The interaction of the ascorbic acid with the hydrated cement matrix was also evaluated with differential thermal and thermogravimetric analysis (DTA/TG) and pH measurements. The results indicated that, depending on the ascorbic acid concentration, it can be an activator of the corrosion process or an effective corrosion inhibitor in a similar manner to sodium nitrite. A corrosion rate decrease was achieved with concentrations below 10−2 mol/L and the optimum content was 10−3 mol/L. Within this concentration range, the AA does not modify the hydration performance of the cement matrix., This research was funded by the Ministry of Science and Innovation of Spain by means of the Research Fund Projects RTI2018-100962-B-100 and PID 2021-128616OB-100., Peer Reviewed, Postprint (published version)