Skip to main content

MECANIZADO ASISTIDO POR ULTRASONIDOS PARA LA MEJORA FUNCIONAL DE COMPONENTES PARA EL SECTOR TRANSPORTE

RTI2018-101653-B-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DAU Arxiu Digital de la Universitat Ramon Llull
Publication Artículo científico (JournalArticle)

Mechanical strengthening in S235JR steel sheets through vibration-assisted ball burnishing

  • Gomez-Gras, Giovanni
  • Llumà Fuentes, Jordi
  • Jerez Mesa, Ramón
  • Rue-Mascarell, Jaume
  • Travieso Rodriguez, Jose Antonio
The superficial effect of hardening caused after vibration-assisted ball burnishing and its consequences in the tensile behavior of a carbon steel material are studied in this paper. As ball burnishing affects the material to hundredths of micrometers in depth through plastic deformation, the overall macro effect of this modification was studied. Different levels of preload and vibration amplitude were studied to address the described issue. The study was done in two phases. First of all, the depth to which ball burnishing affects the material was studied by performing Vickers indentation tests with different loads. It was proven that the effects of ball burnishing are best represented when a 0.05 kg load is used, as higher loads include more volume of core material in the measurement, hence hiding the effect of ball burnishing. In a second phase, the ball burnished specimens were subjected to tensile tests. It was proven that an increase of burnishing preload diminishes the ductile behavior of the material and increases its strength representative values, although the proportion of affected material in the cross-section of the specimen is reduced with regard to the whole surface. Additionally, as the preload increases, the effects of assistance through vibrations is reduced, and the effect of the static preload acquires more relevance in modifying the macroscopic mechanical properties of the steel alloy. Experiments using different amplitudes and new forces are encouraged to obtain more information about how the material can be modified optimally through vibration-assisted ball burnishing.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Experimental validation of ball burnishing numerical simulation on ball-end milled martensitic stainless-steel considering friction and the initial surface topography

  • Torres Chamorro, Lisbeth Alejandra
  • Amini, Cyrus
  • Cuadrado Lafoz, Núria
  • Travieso Rodríguez, José Antonio|||0000-0002-9273-5762
  • Llumà Fuentes, Jordi|||0000-0002-4982-206X
  • Vilaseca Llosada, Montserrat
Numerous simplified numerical models have been established to optimize the ball burnishing of steel surfaces. Nevertheless, their conceptualization has not considered the tool–part interaction, leading to an unsatisfactory process parameterization. As a solution, a structured numerical simulation has been defined that reproduces this interaction by several friction coefficient approximations. This study provides the tribological process inputs (friction and initial surface conditions) to this model, adapting it to a pre-textured martensitic precipitation hardening stainless-steel. Results show the versatility of the model to reproduce the surface integrity alterations. Hence, this consistent model configuration can be postulated as an economical and efficient approach to tackle ball burnishing parameterization according to the applicability of the manufactured steel parts., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Wear resistance enhancement of AISI 1045 steel by vibration assisted ball burnishing process

  • Velázquez Corral, Eric|||0000-0001-8037-7913
  • Jerez Mesa, Ramón|||0000-0002-5084-3108
  • Llumà Fuentes, Jordi|||0000-0002-4982-206X
  • Wagner, Vincent
  • Dessein, Gilles
  • Travieso Rodríguez, José Antonio|||0000-0002-9273-5762
The objective of the research was to analyse the impact of the ultrasonic vibration assistance on the wear resistance and topology enhancement of AISI 1045 cylindrical steel samples after a ball burnishing process. Burnishing process parameters such as burnishing force, number of passes and the assistance, or not, of a 40kHz vibration wave. A screening design of 3 factors with 2 central points was planned. An improvement in wear resistance and topology when the ultrasonic vibration assistance is applied, is expected due to the effects of the ball burnishing procedure on the microstructure of the samples., Financial support for this study was provided by the Ministry of Science, Innovation and Universities of Spain, through grant RTI2018-101653-B-I00 and by the regional government of Catalonia and FEDER funds for regional development through grant IU68-016744.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Ultrasonic vibration-assisted ball burnishing tool for a lathe characterized by acoustic emission and vibratory measurements

  • Fernández Osete, Ismael
  • Estévez Urra, Aida
  • Velázquez Corral, Eric|||0000-0001-8037-7913
  • Valentín Ruiz, David|||0000-0001-7125-0734
  • Llumà Fuentes, Jordi|||0000-0002-4982-206X
  • Jerez Mesa, Ramón|||0000-0002-5084-3108
  • Travieso Rodríguez, José Antonio|||0000-0002-9273-5762
This paper focuses on a resonant system used to induce a low-amplitude movement and ultrasonic frequency to complement a ball burnishing process on a lathe. The system was characterized through the combination of different techniques. A full vibratory characterization of this process was undertaken with the purpose of demonstrating that the mechanical system—composed of the tool and the machine—does not present resonance phenomena during the execution of the operation that could lead to eventual failure. This dynamic analysis validates the adequateness of the tool when attached to an NC lathe, which is important to guarantee its future implementation in actual manufacturing contexts. A further aim was to confirm that the system succeeds in transmitting an oscillating signal throughout the material lattice. To this end, different static and dynamic techniques that measure different vibration ranges—including impact tests, acoustic emission measurement, and vibration measurement—were combined. An operational deflection shape model was also constructed. Results demonstrate that the only high frequency appearing in the process originated in the tool. The process was not affected by the presence of vibration assistance, nor by the burnishing preload or feed levels. Furthermore, the frequency of the assisting ultrasonic vibration was characterized and no signal due to possible damage in the material of the specimens was detected. These results demonstrate the suitability of the new tool in the vibration-assisted ball burnishing process., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Mechanical strengthening in S235JR steel sheets through vibration-assisted ball burnishing

  • Gomez-Gras, Giovanni
  • Llumà Fuentes, Jordi
  • Jerez Mesa, Ramón
  • Rue-Mascarell, Jaume
  • Travieso Rodriguez, Jose Antonio
The superficial effect of hardening caused after vibration-assisted ball burnishing and its consequences in the tensile behavior of a carbon steel material are studied in this paper. As ball burnishing affects the material to hundredths of micrometers in depth through plastic deformation, the overall macro effect of this modification was studied. Different levels of preload and vibration amplitude were studied to address the described issue. The study was done in two phases. First of all, the depth to which ball burnishing affects the material was studied by performing Vickers indentation tests with different loads. It was proven that the effects of ball burnishing are best represented when a 0.05 kg load is used, as higher loads include more volume of core material in the measurement, hence hiding the effect of ball burnishing. In a second phase, the ball burnished specimens were subjected to tensile tests. It was proven that an increase of burnishing preload diminishes the ductile behavior of the material and increases its strength representative values, although the proportion of affected material in the cross-section of the specimen is reduced with regard to the whole surface. Additionally, as the preload increases, the effects of assistance through vibrations is reduced, and the effect of the static preload acquires more relevance in modifying the macroscopic mechanical properties of the steel alloy. Experiments using different amplitudes and new forces are encouraged to obtain more information about how the material can be modified optimally through vibration-assisted ball burnishing.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Experimental validation of ball burnishing numerical simulation on ball-end milled martensitic stainless-steel considering friction and the initial surface topography

  • Torres Chamorro, Lisbeth Alejandra
  • Amini, Cyrus
  • Cuadrado Lafoz, Núria
  • Travieso Rodríguez, José Antonio
  • Llumà Fuentes, Jordi
  • Vilaseca Llosada, Montserrat
Numerous simplified numerical models have been established to optimize the ball burnishing of steel surfaces. Nevertheless, their conceptualization has not considered the tool–part interaction, leading to an unsatisfactory process parameterization. As a solution, a structured numerical simulation has been defined that reproduces this interaction by several friction coefficient approximations. This study provides the tribological process inputs (friction and initial surface conditions) to this model, adapting it to a pre-textured martensitic precipitation hardening stainless-steel. Results show the versatility of the model to reproduce the surface integrity alterations. Hence, this consistent model configuration can be postulated as an economical and efficient approach to tackle ball burnishing parameterization according to the applicability of the manufactured steel parts., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Ultrasonic vibration-assisted ball burnishing tool for a lathe characterized by acoustic emission and vibratory measurements

  • Fernández Osete, Ismael
  • Estévez Urra, Aida
  • Velázquez Corral, Eric
  • Valentín Ruiz, David
  • Llumà Fuentes, Jordi
  • Jerez Mesa, Ramón
  • Travieso Rodríguez, José Antonio
This paper focuses on a resonant system used to induce a low-amplitude movement and ultrasonic frequency to complement a ball burnishing process on a lathe. The system was characterized through the combination of different techniques. A full vibratory characterization of this process was undertaken with the purpose of demonstrating that the mechanical system—composed of the tool and the machine—does not present resonance phenomena during the execution of the operation that could lead to eventual failure. This dynamic analysis validates the adequateness of the tool when attached to an NC lathe, which is important to guarantee its future implementation in actual manufacturing contexts. A further aim was to confirm that the system succeeds in transmitting an oscillating signal throughout the material lattice. To this end, different static and dynamic techniques that measure different vibration ranges—including impact tests, acoustic emission measurement, and vibration measurement—were combined. An operational deflection shape model was also constructed. Results demonstrate that the only high frequency appearing in the process originated in the tool. The process was not affected by the presence of vibration assistance, nor by the burnishing preload or feed levels. Furthermore, the frequency of the assisting ultrasonic vibration was characterized and no signal due to possible damage in the material of the specimens was detected. These results demonstrate the suitability of the new tool in the vibration-assisted ball burnishing process., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)