Skip to main content

ESTRATEGIAS DE FABRICACION ESCALABLES PARA DISPOSITIVOS DE UN SOLO ELECTRON

RTI2018-102007-B-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring strategies to contact 3D nano-pillars

  • Amat, Esteve
  • Moral, Alberto del
  • Fernández-Regúlez, Marta
  • Evangelio, Laura
  • Lorenzoni, Matteo
  • Gharbi, Ahmed
  • Rademaker, Guido
  • Pourteau, Marie-Line
  • Tiron, Raluca
  • Bausells, Joan
  • Perez Murano, Francesc X.
This contribution explores different strategies to electrically contact vertical pillars with diameters less than 100 nm. Two process strategies have been defined, the first based on Atomic Force Microscope (AFM) indentation and the second based on planarization and reactive ion etching (RIE). We have demonstrated that both proposals provide suitable contacts. The results help to conclude that the most feasible strategy to be implementable is the one using planarization and reactive ion etching since it is more suitable for parallel and/or high-volume manufacturing processing., This work received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 688072 (Ions4SET), by the Spanish Ministry of Economy and Competitiveness (MINECO) under Contract Nos, TEC2015-69864-R and RTI2018-102007-B-I00 and by the Generalitat de Catalunya (2017 SGR 1187). This work made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MEINCOM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-assembly of block copolymers under non-isothermal annealing conditions as revealed by grazing-incidence small-angle X-ray scattering

  • Fernández-Regúlez, Marta
  • Solano, Eduardo
  • Evangelio, Laura
  • Gottlieb, S.
  • Pinto-Gómez, Christian
  • Rius, Gemma
  • Fraxedas, J.
  • Gutiérrez, Edgar
  • Nogales, Aurora
  • García-Gutiérrez, Mari Cruz
  • Ezquerra, Tiberio A.
  • Perez Murano, Francesc X.
An accurate knowledge of the parameters governing the kinetics of block copolymer self-assembly is crucial to model the time- and temperature-dependent evolution of pattern formation during annealing as well as to predict the most efficient conditions for the formation of defect-free patterns. Here, the self-assembly kinetics of a lamellar PS-b-PMMA block copolymer under both isothermal and non-isothermal annealing conditions are investigated by combining grazing-incidence small-angle X-ray scattering (GISAXS) experiments with a novel modelling methodology that accounts for the annealing history of the block copolymer film before it reaches the isothermal regime. Such a model allows conventional studies in isothermal annealing conditions to be extended to the more realistic case of non-isothermal annealing and prediction of the accuracy in the determination of the relevant parameters, namely the correlation length and the growth exponent, which define the kinetics of the self-assembly., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 665919, the Spanish Ministry of Economy and Competitiveness (MINECO) under contract Nos. MAT2015-68307-P, MAT2015-66443-C02-1-R, TEC2015-69864-R, RTI2018-102007-B-I00, PID209-107514GB-100, RYC-2016-21412 and the Generalitat de Catalunya under contract No. 2017 SGR 1187. The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant No. SEV-2017-0706) (MINECO/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Directed Self-Assembly of Block Copolymers for the Fabrication of Functional Devices

  • Pinto-Gómez, Christian
  • Perez Murano, Francesc X.
  • Bausells, Joan
  • Villanueva, Luis Guillermo
  • Fernández-Regúlez, Marta
Directed self-assembly of block copolymers is a bottom-up approach to nanofabrication that has attracted high interest in recent years due to its inherent simplicity, high throughput, low cost and potential for sub-10 nm resolution. In this paper, we review the main principles of directed self-assembly of block copolymers and give a brief overview of some of the most extended applications. We present a novel fabrication route based on the introduction of directed self-assembly of block copolymers as a patterning option for the fabrication of nanoelectromechanical systems. As a proof of concept, we demonstrate the fabrication of suspended silicon membranes clamped by dense arrays of single-crystal silicon nanowires of sub-10 nm diameter. Resulting devices can be further developed for building up high-sensitive mass sensors based on nanomechanical resonators., This research was funded by the Government of Spain, under projects NANOINTEGRA (MINECO/FEDER, EU TEC2015-69864-R) and STARSED (RTI2018-102007-B-I00). This project has received funding from the European Union?s Horizon 2020 research and innovation programme under the Marie Sk?odowska-Curie grant agreement No 665919 and the EU Horizon 2020 ASCENT programme (grant No 654384)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal Imaging of Block Copolymers with Sub-10 nm Resolution

  • Gottlieb, Steven
  • Pigard, Louis
  • Ryu, Yu Kyoung
  • Lorenzoni, Matteo
  • Evangelio, Laura
  • Fernández-Regúlez, Marta
  • Rawlings, Colin D.
  • Spieser, Martin
  • Perez Murano, Francesc X.
  • Müller, Marcus
  • Knoll, Armin W.
Thermal silicon probes have demonstrated their potential to investigate the thermal properties of various materials at high resolution. However, a thorough assessment of the achievable resolution is missing. Here, we present a probe-based thermal-imaging technique capable of providing sub-10 nm lateral resolution at a sub-10 ms pixel rate. We demonstrate the resolution by resolving microphase-separated PS-b-PMMA block copolymers that self-assemble in 11 to 19 nm half-period lamellar structures. We resolve an asymmetry in the heat flux signal at submolecular dimensions and assess the ratio of heat flux into both polymers in various geometries. These observations are quantitatively compared with coarse-grained molecular simulations of energy transport that reveal an enhancement of transport along the macromolecular backbone and a Kapitza resistance at the internal interfaces of the self-assembled structure. This comparison discloses a tip-sample contact radius of a ≈ 4 nm and identifies combinations of enhanced intramolecular transport and Kapitza resistance., This project is partially funded by the EU projects SNM (grant agreement no. 318804) and NFFA (grant agreement no. 654360) and by the Spanish Ministry of Economy and Competitiveness (MINECO) under Contract RTI2018-102007-B-I00, the Generalitat de Catalunya under contract 2017 SGR 1187, and the Deutsche Forschungsgemeinschaft (DFG) via the CRC1073/TPA03. We also acknowledge Christophe Navarro and Celia Nicolet of Arkema for supplying some of the polymers used in this work. We thank the von Neumann Institute for Computing (NIC) for access to the supercomputer JUWELS at the Jülich Supercomputing Centre (JSC). Additional computational resources at the HLRN Berlin/Göttingen were made available to the project. We would also like to thank Lilli-Marie Pavka for proofreading the manuscript., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Self-assembly of block copolymers under nonisothermal annealing conditions as revealed by grazing-incidence small-angle X-ray scattering

  • Fernández Regúlez, Marta
  • Solano, Eduardo|||0000-0002-2348-2271
  • Evangelio Araujo, Laura
  • Gottlieb, Steven|||0000-0003-1642-8602
  • Pinto-Gómez, Christian
  • Rius, Gemma|||0000-0003-0552-1043
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Gutiérrez-Fernández, Edgar
  • Nogales, Aurora|||0000-0002-2494-3551
  • García-Gutiérrez, Mari Cruz|||0000-0002-3604-1512
  • Ezquerra, Tiberio A.
  • Pérez Murano, Francesc|||0000-0002-4647-8558
An accurate knowledge of the parameters governing the kinetics of block copolymer self-assembly is crucial to model the time- and temperature-dependent evolution of pattern formation during annealing as well as to predict the most efficient conditions for the formation of defect-free patterns. Here, the self-assembly kinetics of a lamellar PS-b-PMMA block copolymer under both isothermal and non-isothermal annealing conditions are investigated by combining grazing-incidence small-angle X-ray scattering (GISAXS) experiments with a novel modelling methodology that accounts for the annealing history of the block copolymer film before it reaches the isothermal regime. Such a model allows conventional studies in isothermal annealing conditions to be extended to the more realistic case of non-isothermal annealing and prediction of the accuracy in the determination of the relevant parameters, namely the correlation length and the growth exponent, which define the kinetics of the self-assembly.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Directed Self-Assembly of Block Copolymers for the Fabrication of Functional Devices

  • Pinto-Gómez, Christian
  • Pérez Murano, Francesc|||0000-0002-4647-8558
  • Bausells Roige, Joan|||0000-0003-3706-4975
  • Villanueva, Luis Guillermo|||0000-0003-3340-2930
  • Fernández-Regúlez, Marta|||0000-0002-2276-5608
Directed self-assembly of block copolymers is a bottom-up approach to nanofabrication that has attracted high interest in recent years due to its inherent simplicity, high throughput, low cost and potential for sub-10 nm resolution. In this paper, we review the main principles of directed self-assembly of block copolymers and give a brief overview of some of the most extended applications. We present a novel fabrication route based on the introduction of directed self-assembly of block copolymers as a patterning option for the fabrication of nanoelectromechanical systems. As a proof of concept, we demonstrate the fabrication of suspended silicon membranes clamped by dense arrays of single-crystal silicon nanowires of sub-10 nm diameter. Resulting devices can be further developed for building up high-sensitive mass sensors based on nanomechanical resonators.