Skip to main content

Synthesis and characterization of group-III nitride compound semiconductors for the fabrication of electronic and optoelectronic devices

RYC-2016-19509

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Incorporación
Call Ramón y Cajal
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD AUTONOMA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 1
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optomechanical Cavities Based on Epitaxial GaP on Nominally (001)-Oriented Si

  • Mouriño-Miñambres, Paula|||0009-0003-6511-1246
  • Mercadé, Laura|||0000-0002-4994-7727
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Resta-López, Raquel|||0009-0007-8657-0782
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Ben Saddik, Karim
  • Barrigón, Enrique
  • Fernández-Garrido, Sergio
  • García, Basilio Javier
[EN] Gallium Phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of optomechanical (OM) cavities on GaP epitaxially grown on nominally (001)-oriented Si is introduced by using a two-step process consisting of a low-temperature etching of GaP followed by selective etching of the underneath silicon. The low-temperature (-30 degrees C) during the dry-etching of GaP hinders the lateral etching rate, preserving the pattern with a deviation between the design and the pattern in the GaP layer lower than 5%, avoiding the complex process of transferring and bonding a GaP wafer to a silicon-on-insulator wafer. To demonstrate the quality and feasibility of the proposed fabrication route, suspended OM cavities are fabricated and experimentally characterized. The cavities exhibit optical quality factors between 103 and 104 at telecom wavelengths, and localized mechanical resonances approximate to 3.1 GHz with quality factors approximate to 63 when measured at room temperature. These results suggest a simple and low-cost way to build GaP-based photonic devices directly integrated on industry-standard Si(001) photonic wafers.; Here, optomechanical (OM) cavities on Gallium Phosphide (GaP) epitaxially grown on exact (001)-Si are fabricated following a novel two-step dry-etching process. The suspended OM cavities showed optical Q-factors up to 104 at telecom wavelengths, and mechanical resonances at approximate to 3.1 GHz at room temperature, suggesting a simple and low-cost way to build GaP-based photonic devices directly integrated on Si(001) photonic wafers. image, P.M. and L.M. contributed equally to this work. V.J.G., P.M, and R.R acknowledge financial support from the Generalitat Valenciana (Project: INVEST/2022/170). M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). V.J.G. acknowledges financial support from the Generalitat Valenciana (CDEIGENT/2020/009), partial funding from the Conselleria de Educacion, Universidades y Empleo under the NIRVANA Grant (PROMETEO Program, CIPROM/2022/14), and to the AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR". S.F.G. acknowledges the financial support received through the program Ramon y Cajal (co-financed by the European Social Fund) under Grant No. RYC-2016-19509. All authors acknowledge financial support from The AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00, PID2020-114280RB-I00, and PID2021-124618NB-C21) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061). This study formed part of the Quantum Communications program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (COMCUANTICA/003 and COMCUANTICA/004).