Skip to main content

Engineering lightweight, tough and electro-conductive graphene/ceramic composites for structural applications

RYC2018-024404-I

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Incorporación
Call Ramón y Cajal
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel water-based processing of graphene oxide and sub-micrometric alumina towards tougher and electrically-conductive structural ceramics

  • Alemzadeh, Joseph
  • Gutiérrez, Carlos F.
  • Suárez-Menéndez, Marta
  • Díaz, Luis A.
  • Montes-Morán, Miguel A.
  • Blanco, Clara
  • Evans, Sam L.
  • García-Rocha, Victoria
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] Balancing the mechanical and functional properties of graphene-reinforced ceramics can be a challenge because agglomeration of the reinforcement must be avoided to minimise microstructural defects and it is difficult to organise the constituents into meaningful structures. The water-based processing strategy that is demonstrated here illustrates the potential to fabricate layered alumina composites using a combination of freeze-casting, vacuum infiltration, and spark plasma sintering. Layers of alumina between 0.5 and 7 ¿m thick and consist of an average grain size of 0.7 ± 0.4 ¿m were separated by highly-oriented reduced graphene oxide. Mechanical and functional properties were investigated alongside a monolithic counterpart sintered at 1300 ¿C. The flexural strength and fracture toughness increased from 262 to 314 MPa and 3.5¿5.4 MPa m1/2 respectively, whilst electrical conductivity rose by nine orders of magnitude to 10¿ 1 S cm¿ 1 ., The authors would like to thank the financial support provided by the Engineering and Physical Sciences Research Council through the EPSRC grant EP/N509449/1, and Cardiff University-CT work was supported by the National Research Facility for Lab X-ray CT (NXCT) through the EPSRC grant EP/T02593X/1. J. Alemzadeh would like to thank Prof. G. Min for laboratory access within Cardiff University. V.G. Rocha would like to thank the Spanish Government (Ramon y Cajal fellowship, RYC2018-024404-I) and the support from the Principado de Asturias (FICYT)-European Union (FEDER) (Project PCTI-Asturias IDI/2021/ 000015) R. Benavente would like to thank the financial support provided by the Generalitat Valenciana through the grant CIGE/2021/076.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the study of the preparation of graphene-anchored NHC-iridium catalysts from a coke-like waste with application in water splitting

  • González-Ingelmo, María
  • Álvarez Rodríguez, Patricia
  • Granda Ferreira, Marcos
  • Rocha, Victoria G.
  • González Arias, Zoraida
  • Sierra, Uriel
  • Sánchez-Page, Beatriz
  • Jiménez, M. Victoria
  • Pérez-Torrente, Jesús J.
  • Blasco, Javier
  • Subías, Gloria
Graphene oxide has been prepared from an industrial coke-like waste. The morphology of this material (GO-CW) is similar to that of standard graphene oxide (GO-G), although its surface has more defects. Both materials were used to prepare hybrid NHC-Ir(I)/graphene materials, consisting of molecular Ir(NHC) complexes covalently anchored to the graphene surface through the NHC moiety, following two different synthetic routes: (a) direct graphene electrografting of the previously synthesized aniline-functionalized imidazole-2-ylidene-Ir(I) complex, and (b) a two-step sequence comprising initial electrografting of aniline-imidazolium salts and subsequent chemical reaction with Ir(I) precursor anchoring imidazole-2-ylidene-Ir(I) molecular complexes. The synthesized NHC-Ir/graphene hybrid catalysts are active in the oxygen evolution reaction (OER) resulting in current densities in a similar range to those of other NHC-iridium(I) catalysts supported on GO. The highest activity corresponds to hybrid catalysts prepared by the two-step route, with even higher activity and stability when graphene oxide from industrial waste is used. EXAFS spectra of the materials prepared from both synthesis routes before oxidation catalysis reveal the local Ir coordination shell and a structural interaction between Ir and graphene. Both XANES and EXAFS spectra after electrocatalysis point to more oxidized species in which the molecular nature of the iridium catalysts is preserved., The authors thank the Spanish Ministry of Science and innovation (MICINN) (PID2019-104028RB-I00, PID2019-103965GB-I00 and PID2022-137208NB-I00), Spanish National Research Council-CSIC (icoop program, COOPB22006), and Departamento de Ciencia, Universidad y Sociedad del Conocimiento del Gobierno de Aragón (groups E42_23R and E12_23R) for their financial support. V.G. Rocha would like to thank the Spanish Government (Ramón y Cajal fellowship RYC2018-024404-I). M. González-Ingelmo acknowledges her fellowship from the Asturias regional Government (FICYT, Severo Ochoa Program BP20-168). Granted beam time at ALBA synchrotron is appreciated (proposal No. 2020024246)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Novel water-based processing of graphene oxide and sub-micrometric alumina towards tougher and electrically-conductive structural ceramics

  • Alemzadeh, Joseph
  • Benavente, Rut
  • Borrell, Amparo
  • Gutiérrez-González, C. F.
  • Suárez, Marta
  • Díaz, Luis A.
  • Montes Morán, Miguel Ángel
  • Blanco Rodríguez, Clara
  • Evans, Sam L.
  • Rocha, Victoria G.
Balancing the mechanical and functional properties of graphene-reinforced ceramics can be a challenge because agglomeration of the reinforcement must be avoided to minimise microstructural defects and it is difficult to organise the constituents into meaningful structures. The water-based processing strategy that is demonstrated here illustrates the potential to fabricate layered alumina composites using a combination of freeze-casting, vacuum infiltration, and spark plasma sintering. Layers of alumina between 0.5 and 7 μm thick and consist of an average grain size of 0.7 ± 0.4 μm were separated by highly-oriented reduced graphene oxide. Mechanical and functional properties were investigated alongside a monolithic counterpart sintered at 1300 °C. The flexural strength and fracture toughness increased from 262 to 314 MPa and 3.5–5.4 MPa m1/2 respectively, whilst electrical conductivity rose by nine orders of magnitude to 10−1 S cm−1., The authors would like to thank the financial support provided by the Engineering and Physical Sciences Research Council through the EPSRC grant EP/N509449/1, and Cardiff University. μ-CT work was supported by the National Research Facility for Lab X-ray CT (NXCT) through the EPSRC grant EP/T02593X/1. J. Alemzadeh would like to thank Prof. G. Min for laboratory access within Cardiff University. V.G. Rocha would like to thank the Spanish Government (Ramon y Cajal fellowship, RYC2018-024404-I) and the support from the Principado de Asturias (FICYT)-European Union (FEDER) (Project PCTI-Asturias IDI/2021/ 000015) R. Benavente would like to thank the financial support provided by the Generalitat Valenciana through the grant CIGE/2021/076. For the purpose of open access, the author has applied a CC BY public copyright licence to any Author Accepted Manuscript version arising., Peer reviewed