Skip to main content

Diagnosis and intervention on materials from the tangible Cultural Heritage

RYC2020-028902-I

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Incorporación
Call Ramón y Cajal
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Dual combination of cleaning methods (scalpel, biocide, laser) to enhance lichen removal from granite

  • Pozo Antonio, José Santiago
  • Rivas Brea, Maria Teresa
  • Lopez De Silanes Vazquez, Maria Eugenia
  • Ramil, Alberto
  • López Díaz, Ana Jesús
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Three cleaning methods, namely i) a commercial biocide applied by brush with the subsequent extraction of organic remains by a rod, ii) a scalpel or iii) a Nd:YVO4 laser at 355 nm, single application as well as paired combinations, were tested for removing from a granite two different crustose lichens: Diploschistes scruposus (lighter with a clearly distinguished thallus) and Polysporina simplex (darker with a poorly developed thallus). In addition to the removal rate, side effects such as melting of biotite and feldspar grains and chromatic changes were assessed. The multianalytical approach was based on stereomicroscopy, light microscopy, Fourier Transform Infrared spectroscopy, Scanning Electron Microscopy and color spectrophotometry. Combining cleaning methods enhanced the removal efficacy. Biocide followed by laser was the most effective method for removing both lichens colonizing this granite. Mineral melting was more intense for the samples covered by Polysporina simplex due to its lower coverage degree and darker color., Agencia Estatal de Investigación | Ref. BIA2017-85897-R, Agencia Estatal de Investigación | Ref. RYC2020-028902-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

SO2-induced aging of hematite- and cinnabar-based tempera paint mock-ups: influence of binder type/pigment size and composition

  • Pozo Antonio, José Santiago
  • Jiménez Desmond, Daniel José
  • De Villalobos, Lara
  • Mato, Ana
  • Dionísio, Amélia
  • Rivas Brea, Maria Teresa
  • Cardell, Carolina
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Hematite- and cinnabar-based paint mock-ups prepared with either rabbit glue or egg yolk binder were artificially aged in an SO2-rich atmosphere, as a model system for investigating the deterioration of tempera paints exposed to an industrial atmosphere. The overall research aim was to identify the type of degradation occurring in tempera paints and the different alteration mechanisms related to the physical, mineralogical and chemical characteristics of the paint. Tempera mock-ups were prepared by mixing binder (egg yolk or rabbit glue) and pigment (cinnabar of different particle sizes or hematite) and were then exposed to SO2 for 2 months in accelerated aging tests. The colour, gloss, reflectance, roughness and micro-texture of the surfaces of the mock-ups were determined before and after the tests. In addition, chemical and mineralogical changes were determined by X-ray Powder Diffraction (XRPD), Attenuated Total Reflection-Fourier Transform Infrared spectroscopy (ATR-FTIR) and Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS) analysis. Colorimetric changes were confirmed, mainly in the cinnabar-based paints containing egg yolk, and in the hematite-based paints containing rabbit glue. Neoformed mineral phases have not been detected by XRPD, but precipitation of gypsum on the exposed surfaces has been confirmed by SEM. For cinnabar-based paints, the amount of sulfate-rich deposits was higher on egg yolk mock-ups than on rabbit glue samples, though the opposite was observed for the hematite-based paints. This confirmed the influence of the binder composition and pigment-binder tandem in the susceptibility to SO2 deposition. Pigment particle size did not have a clear influence on the physical and chemical changes in the tempera mock-ups during the ageing tests., Xunta de Galicia | Ref. ED431F 2022/07, Ministerio de Ciencia e Innovación | Ref. PID2021-123395OA-I00, Ministerio de Ciencia e Innovación | Ref. CGL2012-30729, Junta de Andalucia | Ref. P12-FQM-1889, Ministerio de Ciencia e Innovación | Ref. RYC2020-028902-I, Junta de Andalucia | Ref. RNM-179
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Deterioration of graffiti spray paints applied on granite after a decade of natural environment

  • Pozo Antonio, José Santiago
  • Rivas Brea, Maria Teresa
  • González, Natalio
  • Alonso Villar, Enrique Manuel
Graffiti spray paints are commonly used in contemporaneous mural paintings in public spaces, contributing to the transformation of sites and urban life. These outdoor artworks are now beginning to show different deterioration forms, such as physical-mechanical alteration (loss of material and cohesion, etc.) and chromatic changes. However, the deterioration has not been formally characterized, and the influence of the paint composition and underlying substrate are not known. In this study, three non-metallic (red, blue and black) alkyd graffiti spray paints and one metallic (silver) polyethylene graffiti spray paint were applied to two granite stones with different mineralogy and texture and exposed to a natural urban-marine environment near Vigo (NWSpain) for one decade (2010−2020). Physical changes were evaluated by stereomicroscopy, colour spectrophotometry, measurements of gloss, surface roughness and static contact angle, and peeling test. Mineralogical changes were determined by x-ray diffraction and molecular changes by Fourier transform infrared spectroscopy. Moreover, micromorphological and chemical characterization of the surfaces was conducted by scanning electron microscopy. Physical-mechanical changes, such as craquelure and paint loss, depended on the texture of the granite. More specifically, paint on the granite with the finest grain size showed most intense cracking and loss of material. Chemical changes, which were not related to the granite substrate, were most intense in the red and silver paint coatings. In the red paint, loss of binder was accompanied by an intense fading of the colour (due to titanium dioxide relative enrichment), while in the silver paint coating, chemical changes occurred in both the organic binder and aluminiumparticles, thus darkening the colour. Fewer chemical changes were observed in the blue and black paints. Physical and chemical changes detected in these paints were not correlated., Ministerio de Ciencia e Innovación | Ref. RYC2020-028902-I, European Commission | Ref. n. 588082-EPP-A-2017-1-IT-EPPKA2-KA
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Efficacy of colour protectors in urban art paintings under different conditions: from a real mural to the laboratory

  • Alonso Villar, Enrique Manuel
  • Rivas Brea, Maria Teresa
  • Pozo Antonio, José Santiago
  • Pellis, Giulia
  • Scalarone, Dominique
Financiaciado para publicación en acceso aberto: Universidade de Vigo/CISUG, Contemporary muralism is one of the most widespread manifestations of urban art in cities nowadays. Loss of colour (fading) due to degradation of the pictorial materials is one of the main manifestations of deterioration in this type of artwork. However, the application of protective coatings is considered to slow down fading. In this study, two acrylic-based protective coatings were applied to selected areas of a real mural painted with six different alkyd paints and one acrylic paint. The impact of the protective coatings on the original paint colour and the long-term efficacy were evaluated. For purposes of comparison, the same protective coatings were applied to paint mock-ups prepared under controlled conditions and exposed to an outdoor environment with marine influence and to an ultraviolet aging test. At the end of the exposure periods, physical and chemical changes were evaluated using a multi-analytical approach based on stereomicroscopy, Fourier transform infrared spectroscopy and scanning electron microscopy. Both protective coatings modified the original colour of the paints, with the impact being greater in the mural than in the mock-ups. The efficacy of the coatings as colour protectors is more appreciable in the most colour-stable paints. Thus, neither of the coatings provided good protection for the paints most sensitive to deterioration. The protective efficacy of the coatings was also influenced by their chemical composition and affinity for the painted surfaces., Ministerio de Ciencia e Innovación | Ref. RYC2020-028902-I, European Commission | Ref. CAPuS, 2017-3674/001-001
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Capítulo o parte de un libro (BookPart)

Monitorización de la protección del muralismo contemporáneo: influencia de la pintura, del tipo del sustrato y del ambiente de exposición

  • Rivas Brea, Maria Teresa
  • Pozo Antonio, José Santiago
[Inicio] En términos generales el muralismo contemporáneo se centra en la realización de pinturas sobre grandes superficies como muros y fachadas en centros urbanos. Esta corriente artística se enmarca en el Street Art o arte urbano, que incluye diferentes tipos de arte, tanto pintura como escultura u otras formas de expresión (CaPUS glosario). El Street Art experimentó un notable desarrollo en la década de los 80, cuando el movimiento del grafiti se expandió desde Nueva York hacia otras partes del mundo. En ese período, los grafiteros se enfocaban en crear firmas ilegales utilizando códigos estilísticos dirigidos a una audiencia familiarizada con ellos. Con el tiempo, comenzaron a incorporar nuevas técnicas y estilos, y su mensaje se orientó hacia un público más amplio, con la intención de establecer una comunicación más directa con el ciudadano. Esta evolución dio lugar a una variedad de expresiones artísticas, incluyendo el muralismo. A pesar de su proliferación, existe una falta de consenso en cuanto a la definición de arte urbano desde un punto de vista artístico, social y legal (Gayo, 2016; Schacter, 2016; Abarca, 2017) . [...], Agencia Estatal de Investigación | Ref. CNS2022- 135645, Agencia Estatal de Investigación | Ref. RYC2020-028902-I, European Commission | Ref. 588082-EPP-1-2017-1-IT-EPPKA2-KA
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Sol-silicate versus organic paints: durability after outdoor and ultraviolet radiation exposures

  • Alonso Villar, Enrique Manuel
  • Rivas Brea, Maria Teresa
  • Pozo Antonio, José Santiago
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Sol-silicate paints and polyvinyl acetate paints with similar red and green colour tones were applied to concrete and brick specimens and underwent either natural outdoor exposure in a marine setting for 12 months or accelerated ultraviolet radiation exposure (total exposure 4620 h). Chromatic changes were regularly monitored via spectrophotometer measurements. After exposure, physical, chemical, and mineralogical changes were evaluated using a multianalytical protocol based on stereomicroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and contact angle and peeling test measurements. After both tests, all the samples underwent colour changes whose intensity was independent of the type of substrate and type of exposure, being more related to the nature of the chromophore than to the nature of the base paint (organic or sol-silicate). After the outdoor test, the detachment of the pictorial layer was occurred in all the samples, more intensely in the sol-silicate painted brick mockups; this detachment process was related to salt precipitation-dissolution phenomena, mainly gypsum from marine aerosol, which causes effects that are more adverse when the adhesion between the paint and the substrate is weak. Compared to conventional organic paints, the use of sol-silicate paints in works of art in public spaces could meet the durability expectations of artists, always performing a prior evaluation focused to the selection of substrates that provide good adhesion and located in environments free from sources of salts., Agencia Estatal de Investigación | Ref. RYC2020-028902-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Outdoor durability of nano-sized silica-based chromatic reintegrations. Influence of exposure conditions and pigment composition

  • Jiménez Desmond, Daniel José
  • Pozo Antonio, José Santiago
  • Arizzi, Anna
Outdoor exposed wall paintings are highly vulnerable to decay from environmental factors such as solar radiation, humidity, and soluble salts. These factors can also affect the chromatic reintegrations in wall paintings. However, little research has been conducted on their durability. Therefore, a novel approach has been carried out by exploring the use of an aqueous colloidal dispersion of nano-sized silica as a binder in chromatic reintegrations under different environments. Thus, the binder was mixed with pigments (silicate-, oxide- and sulphide-based ones) to evaluate the influence of their chemical nature on the durability. Also, the paint mock-ups were exposed for one year to outdoor Csb- and Dsa-type environments (Köppen-Geiger climate classification system), in which moisture, temperature, rainfall and proximity to the sea differ considerably. Colour and gloss were measured before and after exposure. The paint samples were characterized using X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, and optical and scanning electron microscopies. After exposure, colour stability was highly influenced by the chemical nature of the pigments. A calcium-rich layer developed on all the mock-ups, together with other deposits, whose extent was highly influenced by the exposure conditions. Oxide-based pigments provided the best results, followed by the blue silicate-based ones. In contrast, sulphide-based and green earth-based pigments suffered substantial paint loss and colour changes. The different performance of the paintings was due to the affinity of the pigments with the binder and their predisposition to form bonds with hydroxyl (–OH), silanol (Si–OH) and siloxane (Si–O–Si) groups., Xunta de Galicia | Ref. ED431F 2022/07, Xunta de Galicia | Ref. ED481A-2023/086, Agencia Estatal de Investigación | Ref. RYC2020-028902-I, Agencia Estatal de Investigación | Ref. PID2020-119838RA-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

The influence of using wet cellulose poultice on nanolime consolidation treatments applied on a limestone

  • Pozo Antonio, José Santiago
  • Otero, Jorge
  • González, Natalio
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Consolidation treatment with nanolime is a common conservation intervention which needs more research to enhance penetration and mechanical properties while also minimizing the undesired white veil on the surface which significantly alters the surface appearance. In this light, the application of a cellulose poultice soaked in distilled water over the treated surface with nanolime tries to prevent the formation of white hazes and to favour nanolime carbonation and penetration in the pore structure. However, the real influence of this practice on the consolidation effectiveness has never been studied yet and is not yet well understood. In order to provide more insights about its most suitable application method, in this study, we investigated the effectiveness of a wet cellulose poultice for two different nanolime consolidation treatments on a weathered limestone. Nanolime has been synthetized by anion exchange processes and dispersed in two mediums: i) water and ii) 50% v/v of water and alcohol. The influence of the poultice on the penetration and aesthetic properties has been studied by drilling resistance measurement, ultrasounds test, stereomicroscopy, measurements of roughness and static contact angle, spectrophotometry and scanning electron microscopy (superficial and cross sectioned samples). Additionally, consolidation effectiveness has been evaluated through the changes in apparent density, open porosity, porosity network in the outer 5 mm of the surface by mercury intrusion porosimetry and surface cohesion by the peeling test. Results show that, contrary to what is usually assumed, samples where a wet cellulose poultice was applied after the consolidant reached the lowest penetration levels and retained lower dry matter in comparison to their counterparts without poultice. A consolidation treatment with nanolime is more complex that it is generally considered, and the application of poultices is not always enhancing consolidation level; the most suitable application procedure must be chosen with regards to the nanolime and substrate specific characteristics., Agencia Estatal de Investigación | Ref. RYC2020-028902-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Reflectance of oil paintings: influence of paint layer thickness and binder amount

  • Pozo Antonio, José Santiago
  • Cardell, Carolina
  • Sánchez, Sonia
  • Montes Rueda, Jesús
Roughness, pigment impurities, and neoformed minerals are important factors affecting the reflectance of painted surfaces. However, other factors that have not yet been studied in detail, such as the total thickness of the paint layer and the amount of binder, should also be considered. In this research, oil painting mock-ups, each made with a different number of layers of paint containing a single pigment (lead white, orpiment, cinnabar, azurite or malachite) mixed with different proportions of oil binder, were examined using a hyperspectral imaging system. The results indicate that these characteristics do not directly influence the reflectance of the painted surface. Interestingly, we found that the distribution of the pigments and the oil binder in the paint system (and pigment-binder interaction) are also key to understanding the reflectance values. Thus, accumulation of oil on top of the uppermost paint layer in the multilayer painting mock-ups caused a reduction in reflectance. The increased translucency of the oil paint containing lead white pigment also modified the reflectance, possibly due to the formation of metal soap. Other factors found to affect the reflectance of the painting mock-ups are discussed., Universidade de Vigo | Ref. CINTECX, Universidad de Granada | Ref. RMN-179, Ministerio de Ciencia e Innovación | Ref. RYC2020-028902-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Evaluation of a protective acrylic finish applied to surfaces painted with acrylic paints for outdoor or indoor uses

  • Pozo Antonio, José Santiago
  • Alonso Villar, Enrique Manuel
  • Rivas Brea, Maria Teresa
  • Márquez, Iria
Protection of contemporary murals to reduce paint fading caused by exposure to sunlight is currently under study due to a general demand. In this study we evaluated the effectiveness of a commercial protective acrylic finish applied to concrete and brick mock-ups previously painted with different coloured (red and yellow) paints for outdoor and indoor uses. The mock-ups were exposed to an accelerated aging test, with artificial UV irradiation for 3630 h. UV radiation is the most threatening sunlight portion to the paints used in these artworks, inducing mainly fading. Colorimetric measurements were made on the surfaces every 15 days. At the end, aged samples and the respective controls (not subjected to the aging test) were evaluated by stereomicroscopy, X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy. Application of the protective finish modified the surface of the paintwork, but generally reduced the rate at which the colour changed. In the mock-ups painted with paint for indoor use without the protective finish, the paintwork degraded faster on brick than on concrete.The findings highlight the need for appropriate selection of paints depending on where they will be applied and the suitability of using a protective finish depending on the composition of each paint., Agencia Estatal de Investigación | Ref. RYC2020-028902-I, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

CO2 laser cleaning of gum residues on architectural stone and quantitative assessment by hyperspectral imaging

  • Quintero Martínez, Félix
  • Reinoso, V.
  • Jiménez Desmond, Daniel José
  • Andrés Herguedas, Laura
  • Del Val Garcia, Jesús
  • Fernández Arias, Mónica
  • Barro Guizán, Óscar
  • Ramil, A.
  • Pozo Antonio, José Santiago
  • Pou Saracho, Juan María
Different methods have been developed to remove deposits or crusts on the architectonic elements located in the center of the cities, such as graffiti, patinas, gypsum black crusts, etc. Short pulsed lasers with wavelengths ranging from UV to NIR have demonstrated to be effective to clean some of these deposits or crusts. Here, we present an alternative laser cleaning method to remove chewing gum on architectural elements of natural stone, based on the use of a continuous wave, low power CO2 laser emitting in its fundamental wavelength (10.6 μm). Chewing gums are mainly composed of their rubber or elastomer components which strongly absorb the CO2 laser radiation. Thus, we demonstrate the effectiveness of this compact and robust type of laser to clean these substances, deposited on granite, without damaging the substrate. Additionally, we propose a method to quantitatively assess the cleaning level based on hyperspectral reflectance imaging. This method is based on the determination of the coefficients of abundance of granite (αG) using reflectance curves obtained by a hyperspectral camera. The results obtained have been confirmed using characterization techniques commonly used in the cleaning level determination: stereomicroscopy, profilometry, Raman spectroscopy and Fourier-transform infrared spectroscopy. This non-invasive method of cleaning control will allow decisions to be made in real time during the cleaning process of architectonic heritage, avoiding over-cleaning or insufficient cleaning., Interreg Atlantic Area | Ref. EAPA_151/2016, Xunta de Galicia | Ref. ED431C 2023/25, Xunta de Galicia | Ref. ED481A-2023/086, Agencia Estatal de Investigación | Ref. PID2020-117900RB-I00, Agencia Estatal de Investigación | Ref. PRE2022-105106, Agencia Estatal de Investigación | Ref. RYC2020-028902-I
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Dual Combination of Cleaning Methods (Scalpel, Biocide, Laser) To Enhance Lichen Removal From Granite

  • Pozo Antonio, José Santiago
  • Rivas Brea, Teresa
  • López de Silanes, María Eugenia
  • Ramil, Alberto
  • López, Ana
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, [Abstract] Three cleaning methods, namely i) a commercial biocide applied by brush with the subsequent extraction of organic remains by a rod, ii) a scalpel or iii) a Nd:YVO4 laser at 355 nm, single application as well as paired combinations, were tested for removing from a granite two different crustose lichens: Diploschistes scruposus (lighter with a clearly distinguished thallus) and Polysporina simplex (darker with a poorly developed thallus). In addition to the removal rate, side effects such as melting of biotite and feldspar grains and chromatic changes were assessed. The multianalytical approach was based on stereomicroscopy, light microscopy, Fourier Transform Infrared spectroscopy, Scanning Electron Microscopy and color spectrophotometry. Combining cleaning methods enhanced the removal efficacy. Biocide followed by laser was the most effective method for removing both lichens colonizing this granite. Mineral melting was more intense for the samples covered by Polysporina simplex due to its lower coverage degree and darker color., This research was funded by the Spanish Ministerio de Economía y Competitividad under grant number BIA2017-85897-R. J.S. Pozo-Antonio was supported by the Ministry of Science and Innovation, Government of Spain through grant number RYC2020-028902-I. The authors thank Ms Cristina Montojo from Escola Superior de Conservación e Restauración de Bens Culturais de Galicia and PhD Maria del Carmen López from Universidade de Santiago de Compostela for technical assistance. Funding for open access charge: Universidade de Vigo/CISUG