Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new method for pedicel/peduncle detection and size assessment of grapevine berries and other fruits by image analysis

  • Cubero García, Sergio
  • Diago, María Paz
  • Blasco Ivars, José
  • Tardáguila Laso, Javier
  • Millán, Borja
  • Aleixos Borrás, María Nuria|||0000-0001-6051-3375
[EN] The berry size of wine-grapes has often been considered to influence wine composition and quality, as it is related to the skin-to-pulp ratio of the berry and the concentration of skin-located compounds that play a key role in the wine quality. The size and weight of wine-grapes are usually measured by hand, making it a slow, tedious and inaccurate process. This paper focuses on two main objectives aimed at automating this process using image analysis: (1) to develop a fast and accurate method for detecting and removing the pedicel in images of berries, and (2) to accurately determine the size and weight of the berry. A method to detect the peduncle of fruits is presented based on a novel signature of the contour. This method has been developed specifically for grapevine berries, and was later extended and tested with an independent set of other fruits with different shapes and sizes such as peppers, pears, apples or mandarins. Using this approach, the system has been capable of correctly estimating the berry weight (R-2 > 0.96) and size (R-2 > 0.97) of wine-grapes and of assessing the size of other fruits like mandarins, apples, pears and red peppers (R-2 > 0.93). The proven performance of the image analysis methodology developed may be easily implemented in automated inspection systems to accurately estimate the weight of a wide range of fruits including wine-grapes. In this case, the implementation of this system on sorting tables after de-stemming may provide the winemaker with very useful information about the potential quality of the wine., This work has been partially funded by the Instituto Nacional de Investigacio´n y Tecnologı´a Agraria y Alimentaria de Espan˜ a (INIA) through research project RTA2012-00062-C04-01 and RTA2012-00062-C04-03 with the support of European FEDER funds, by the UPV-IVIA collaboration agreement through UPV2013000005, and by UPV-SP10120276 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new method for assessment of bunch compactness using automated image analysis

  • Cubero García, Sergio
  • Diago, M. P
  • Blasco Ivars, José
  • Tardáguila Laso, Javier
  • Ibanez, J.
  • Tello, J.
  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Aleixos Borrás, María Nuria|||0000-0001-6051-3375
Background and AimsBunch compactness is a key feature determining grape and wine composition because tight bunches show a less homogeneous ripening, and are prone to greater fungal disease incidence. The Organisation Internationale de la Vigne et du Vin descriptor, the most recent method for the assessment of bunch compactness, requires visual inspection and trained evaluators, and provides subjective and qualitative values. The aim of this work was to develop a methodology based on image analysis to determine bunch compactness in a non-invasive, objective and quantitative way. Methods and ResultsNinety bunches of nine different red cultivars of Vitis viniferaL. were photographed with a colour camera, and their bunch compactness was determined by visual inspection. A predictive partial least squares (PLS) model was developed in order to estimate bunch compactness from the morphological features extracted by automated image analysis, after the supervised segmentation of the images. The PLS model showed a capability of 85.3% for predicting correctly the rating of bunch compactness. The most discriminant variables of the model were highly correlated with the tightness of the berries in the bunch (proportion of visibility of berries, rachis and holes) and with the shape of the bunch (roundness, compactness shape factor and aspect ratio). ConclusionsThe non-invasive, image analysis methodology presented here enables the quantitative assessment of bunch compactness, thereby providing precise objective information for this key parameter. Significance of the StudyA quantitative, objective and accurate system based on image analysis was developed as an alternative to current visual methods for the estimation of bunch compactness. This novel method could be applied to the classification of table grapes and/or at the receival point of wineries for sorting and assessment of wine grapes before vinification., This work has been partially funded by the Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA) through research projects RTA2012-00062-C04-01 and RTA2012-00062-C04-03 with the support of European FEDER funds, by the MINECO (Spain) through the projects AGL2010-15694, AGL2011-23673, by UPV project UPV-SP10120276, and the pre-doctoral fellowship BES-2011-047041 (J. Tello).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessment of cluster yield components by image analysis

  • Diago, Maria P.
  • Tardaguila, Javier
  • Millan, Borja
  • Cubero, Sergio
  • BLASCO IVARS, JOSE
  • Aleixos Borrás, María Nuria|||0000-0001-6051-3375
  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
[EN] BACKGROUND: Berry weight, berry number and cluster weight are key parameters for yield estimation for wine and tablegrape industry. Current yield prediction methods are destructive, labour-demanding and time-consuming. In this work, a new methodology, based on image analysis was developed to determine cluster yield components in a fast and inexpensive way. RESULTS: Clusters of seven different red varieties of grapevine (Vitis vinifera L.) were photographed under laboratory conditions and their cluster yield components manually determined after image acquisition. Two algorithms based on the Canny and the logarithmic image processing approaches were tested to find the contours of the berries in the images prior to berry detection performed bymeans of the Hough Transform. Results were obtained in two ways: by analysing either a single image of the cluster or using four images per cluster from different orientations. The best results (R2 between 69% and 95% in berry detection and between 65% and 97% in cluster weight estimation) were achieved using four images and the Canny algorithm. The model¿s capability based on image analysis to predict berry weight was 84%. CONCLUSION: The new and low-cost methodology presented here enabled the assessment of cluster yield components, saving time and providing inexpensive information in comparison with current manual methods. © 2014 Society of Chemical Industry, This work has been partially funded by INIA through research projects RTA2012-00062-C04-01 and RTA2012-00062-C04-03 with the support of European FEDER funds. The authors wish also to thank the MINECO which provided support for this research work through project AGL2011-23673 and also the UPV project UPV-SP10120276