Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel silicon microparticles to improve sunlight stability of raw polypropylene

  • Gil Castell, Óscar
  • Badía Valiente, José David
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Isabelle Rodriguez|||0000-0001-5479-2494
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
  • Ribes-Greus, A.|||0000-0003-2460-8291
Oxidation of polyolefins by ultraviolet/visible irradiation is a significant limitation for their use in several technological applications. The use of high-tech additives such as silicon microparticles becomes a compositing strategy that can improve the performance of these materials at long-term service conditions. Silicon particles were added to non-additivated raw polypropylene (PP) prepared by hot melt extrusion and subjected to accelerated sunlight irradiation tests. The stability of thermal properties, mechanical performance and thermal decomposition behaviour of composites was evaluated by differential scanning calorimetry, dynamic mechanical thermal analysis and thermogravimetry. This paper shows the potential of silicon microparticles to protect PP from degradation during both processing and accelerated sunlight irradiation. The addition of polydisperse silicon microparticles to the raw polypropylene preserved the appearance and improved the thermal behaviour, mechanical properties and thermal stability. It was found that silicon particles at 5 wt% provided a suitable protection of raw non-additivated PP against sunlight irradiation., B.Sc. A. Montesinos is acknowledged for his dedication in the lab and his outstanding attitude towards learning. Ph.D. L. Santonja-Blasco is thanked for revision of the work and endless and enjoyable discussions. The authors would like to acknowledge the Spanish Ministry of Economy and Competitiveness, through the Research Project MAT2012-3504. The Spanish Ministry of Education, Culture and Sports is also thanked for the predoctoral FPU grant of O. Gil-Castell (FPU13/01916). Generalitat Valenciana is thanked for the PROMETEOII/2014/026, the APOSTD 2014/041 of J.D. Badia and the GRISOLIA/2012/003 for R. Teruel-Juanes. Universitat Politecnica de Valencia is thanked for the support through the PAID-06-SP20120581 project and for the FPI grant of O. Gil-Castell. Repsol (Tarragona, Spain) is acknowledged for providing the raw polypropylene (PP) homopolymer.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Protection of high-density polyethylene-silicon composites from ultraviolet-visible photodegradation

  • Santonja-Blasco, L.
  • Sanchez-Ballester, S.
  • Badia, J.D.
  • Isabelle Rodriguez|||0000-0001-5479-2494
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The extent of the ultraviolet¿visible (UV¿vis) photoirradiation effect on high-density polyethylene (HDPE) and HDPE¿sili-con (Si) composites is reported in terms of the addition of Si microparticles at contents of 0.1, 1, and 5 wt %. A standard acceleratedUV-vis exposure was applied over 2750 h, corresponding to 22 months in Florida. Thermogravimetry, differential scanning calorimetry,and Fourier transform infrared spectroscopy were used as reliable techniques for monitoring the quality of the HDPE-Si composites. Theincreasing addition of Si microparticles delayed the photodegradation of the HDPE¿Si composites. Because of their strong light-scattering effects, Si microparticles blocked the degradation of ter tiary carbons of the HDPE backbone and reduced the apparition ofvinyl groups; this prevented the structural impoverishment of HDPE-Si composites. Consequently, variations in the crystallization tem-perature (Tc) and melting temperature (Tm), which were indicators of photodegradation, were not modified. In general, the HDPE-Sicomposite formulation with 5 wt % Si microparticles was useful for protecting the material from photodegradation and, thus, should bean environmentally friendly, reliable alternative UV-vis blocker., Funding of this work by the European Regional Development Funds and the Spanish Ministry of Economy and Competitiveness through research projects ENE2014-53734-C2-1-R, MAT2012-35040 and the excellence programme Severo Ochoa (SEV-2016-0683) is acknowledged. One of the authors (S.S.-B.) appreciates a Formacion de Personal Investigador predoctoral grant (contract grant number BES-2012-055316). Generalitat Valenciana is thanked for grants to L. Santonja-Blasco (contract grant numbers APOSTD/2013/036) and J. D. Badia (contract grant number APOSTD/2014/041) and funding through research project PROM-ETEOII/2014/026. Universitat Politecnica de Valencia is also thanked for its support (contract grant number PAID-06-SP20120581). The authors acknowledge Puerto Asensio Bros from Inyeccion de Plasticos (Bocairent, Valencia, Spain) for kindly supplying the polymer and L. Cabedo from Jaume I University (Castello, Spain) for providing technical assistance with the preparation of the samples. Finally, the authors thank the Electron Microscopy Service of Universitat Politecnica de Valencia for its support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dielectric spectroscopy of recycled polylactide

  • Badía Valiente, José David
  • Sáenz de Juano Arbona, Víctor
  • Monreal Mengual, Llucía|||0000-0001-5355-7564
  • Ribes-Greus, A.|||0000-0003-2460-8291
The effects of multiple mechanical recycling on amorphous polylactide (PLA) were simulated by means of five successive injection-grinding cycles. The influence of the induced thermo-mechanical degradation on the dielectric properties of PLA was analysed. The relaxation spectra were studied in terms of the complex dielectric permittivity (ε0 and ε00) and the dielectric loss tangent, tg(d) in the frequency range from 102 to 107 Hz over the temperature interval from 0 C to 140 C. It was possible to distinguish two relaxations zones, one at low temperatures and high frequencies (b relaxation) and another at higher temperatures and lower frequencies (a relaxation). The individual relaxations were characterised using the HavriliakeNegami model and the effect of conductivity at high temperatures was subtracted. The thermal activation of the b relaxations was explained on an Arrhenius model basis while the a relaxation was modelled using VogeleFulchereTammanneHesse (VFTH) equations. The study of the segmental dynamics showed a decrease in the fragility parameters, connected with the decrease of molar mass, along with an increase in the free volume, the higher the number of reprocessing cycles were applied, particularly up to the second reprocessing step. 2014 Elsevier Ltd. All rights reserved., The authors would like to acknowledge the Spanish Ministry of Economy and Competitiveness, through the Research Project ENE2011-28735-C02-01. The Vice-Rectorate for Research, Innovation and Technology Transfer of Universitat Politecnica de Valencia is also thanked for additional support through PAID-06-SP20120581 project.