Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the Effect of Inorganic Particles on the Gas Transport Properties of Glassy Polyimides for Selective CO2 and H2O Separation

  • Escorihuela-Roca, Sara
  • Valero, Lucía
  • Tena, Alberto
  • Shishatskiy, Sergey
  • Brinkmann, Torsten
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Three polyimides and six inorganic fillers in a form of nanometer-sized particles were studied as thick film solution cast mixed matrix membranes (MMMs) for the transport of CO2, CH4, and H2O. Gas transport properties and electron microscopy images indicate good polymer-filler compatibility for all membranes. The only filler type thatdemonstrated good distribution throughout the membrane thickness at 10 wt.% loading was BaCe0.2Zr0.7Y0.1O3 (BCZY). The influence of this filler on MMM gas transport properties was studied in detail for 6FDA-6FpDA in a filler content range from one to 20 wt.% and for Matrimid((R)) and P84((R)) at 10 wt.% loading. The most promising result was obtained for Matrimid((R))10 wt.% BCZY MMM, which showed improvement in CO2 and H2O permeabilities accompanied by increased CO2/CH4 selectivity and high water selective membrane at elevated temperatures without H2O/permanent gas selectivity loss., This work was financially supported by the Spanish Government (SEV-2016-0683, SVP-2014-068356, Project ENE2014-57651-R and IJCI-2016-28330 grants) and GeneralitatValenciana (PROMETEO/2018/006 grant) and Helmholtz-Zentrum Geesthacht (HZG) through the technology transfer project program and by the Helmholtz Association of German Research Centers through the Helmholtz Portfolio MEMBRAIN.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Copper surface-alloying of H-2-permeable Pd-based membrane for integration in Fischer-Tropsch synthesis reactors

  • Escorihuela-Roca, Sara
  • Toldrá-Reig, Fidel|||0000-0001-6133-7043
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Murciano Martínez, Raúl
  • MARTINEZ FELIU, AGUSTIN|||0000-0002-9974-1567
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Self-supported palladium tubular membranes are surface-functionalized and tested for the selective and controlled addition of H-2 along a fixed-bed catalytic reactor for Fischer-Tropsch hydrocarbon synthesis (FTS). In order to avoid CO poisoning of the active sites of the metallic membrane at low working temperatures (similar to 250 degrees C), a Cu-based protective layer is deposited on the outer surface of a tubular membrane by RF sputtering at room temperature. Upon thermal treatment in H-2, the Cu layer alloys with Pd on the membrane surface, as confirmed by means of XRD, FESEM and TEM, while the membrane assembly is fully functional, i.e. the negative effect of CO surface adsorption is highly diminished and the membrane provides an appropriate H-2 flux (e.g. 12 ml/min.cm(2)) under the harsh operation conditions practiced in FT synthesis. When the Cu-functionalized membrane is fully integrated in the FTS reactor (250 degrees C, 20 bar, 30% CO in feed), the membrane delivers a stable H-2 permeation flux and enables to increase the yield of hydrocarbons in the range of gasoline (C-5-C-12) while reducing methane formation over a bifunctional CoRu/Al2O3-zeolite catalyst., This work was financially supported by the Spanish Government (SEV-2016-0683, SVP-2014-068356, FPU13/03478, RTI2018-102161 and IJCI-2016-28330 grants) and Generalitat Valenciana (PROMETEO/2018/006 grant).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel Polymeric Thin-Film Composite Membranes for High-Temperature Gas Separations

  • Weigelt, Fynn
  • Escorihuela-Roca, Sara
  • Descalzo, Alberto
  • Tena, Alberto
  • Shishatskiy, Sergey
  • Brinkmann, Torsten
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Novel selective polymeric thin-film composite membranes (TFCMs) for applications at elevated temperatures were developed. Thin selective layers of the polyimides Matrimid 5218((R)) and 6FDA-6FpDA were cast on a developed polybenzimidazole (PBI) porous support prepared by a phase inversion process. The TFCM properties were investigated with different gases in a wide temperature range, including temperatures up to 270 degrees C. The membranes showed very high thermal stability and performed well at the elevated temperatures. The development of highly thermally resistant polymeric membranes such as these TFCMs opens opportunities for application in high-temperature integrated processes, such as catalytic membrane reactors for the water-gas shift reaction in order to maximize H-2 yield., This work was financially supported by the project "New reactor technologies for chemical and biochemical synthesis processes" ("Neue Reaktortechnologien fur Chemische und Biochemische Syntheseverfahren", FKZ: LFF FV 43), funded by the City of Hamburg (Freie und Hansestadt Hamburg, Behorde furWissenschaft, Forschung und Gleichstellung), Germany, the Spanish Government (SEV-2016-0683, SVP-2014-068356, Project ENE2014-57651-R and IJCI-2016-28330 grants), and Generalitat Valenciana (PROMETEO/2018/006 grant).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Intensification of catalytic CO2 methanation mediated by in-situ water removal through a high-temperature polymeric thin-film composite membrane

  • Escorihuela-Roca, Sara
  • Cerdá-Moreno, Cristina
  • Weigelt, Fynn
  • Tena, Alberto
  • Shishatskiy, Sergey
  • Brinkmann, Torsten
  • Remiro-Buenamañana, Sonia|||0000-0002-5393-5729
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Chica, Antonio
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Catalytic CO2 methanation technology can be improved by process intensification, i.e. enabling higher energy efficiency and process sustainability. Here, thin-film composite membranes (TFCM) were developed for in-situ water removal in a catalytic membrane reactor (CMR) for the Sabatier process. The selective separation layer (1.4 mu m-thick) of the composite membrane is made of the polyimide 6FDA-6FpDA, a glassy polyimide, which exhibits high permeability and selectivity together with stable function at unprecedented high temperatures (>200 degrees C), compared to polyimides reported until now (90 degrees C), thus matching the temperature range of Sabatier reactors. Remarkably, TFCM developed in this work, allow to extract an outstanding amount of water up to 1 m(3)/(m(2).h.bar) at 260 degrees C. TFCM was implemented for the water removal from the methanation reaction in a CMR operated at 260 degrees C and using Ni-Todomkite as catalyst. The TFCM-mediated water-extraction enabled to raise both catalytic stability and activity during CMR operation. CO2 conversion stability was greatly improved exhibiting a conversion value of 72 % during the course of the reaction (21 % increase in CO2 conversion), with a water removal of 12.5 % and specific flux of similar to 100 g.h(-1) m(-)(2)., This work was financially supported by the Spanish Government (SVP-2014-068356, SVP-2014-068713, RTI2018-102161 and IJCI-2016-28330 grants) and Generalitat Valenciana (PROMETEO/2018/006 grant) . The authors want also to acknowledge the Electron Microscopy Service from the Universitat Politecnica de Valencia for their support in the SEM and TEM analysis performed in this work.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Intensification of catalytic CO2 methanation mediated by in-situ water removal through a high-temperature polymeric thin-film composite membrane

  • Escorihuela, Sara
  • Cerdá Moreno, Cristina
  • Weigelt, F.
  • Remiro-Buenamañana, Sonia
  • Escolástico Rozalén, Sonia
  • Tena, Alberto
  • Shishatskiy, S.
  • Brinkmann, T.
  • Chica Lara, Antonio
  • Serra Alfaro, José Manuel
Catalytic CO methanation technology can be improved by process intensification, i.e. enabling higher energy efficiency and process sustainability. Here, thin-film composite membranes (TFCM) were developed for in-situ water removal in a catalytic membrane reactor (CMR) for the Sabatier process. The selective separation layer (1.4 μm-thick) of the composite membrane is made of the polyimide 6FDA-6FpDA, a glassy polyimide, which exhibits high permeability and selectivity together with stable function at unprecedented high temperatures (>200 °C), compared to polyimides reported until now (90 °C), thus matching the temperature range of Sabatier reactors. Remarkably, TFCM developed in this work, allow to extract an outstanding amount of water up to 1 m/(m·h·bar) at 260 °C. TFCM was implemented for the water removal from the methanation reaction in a CMR operated at 260 °C and using Ni-Todorokite as catalyst. The TFCM-mediated water-extraction enabled to raise both catalytic stability and activity during CMR operation. CO conversion stability was greatly improved exhibiting a conversion value of 72 % during the course of the reaction (21 % increase in CO conversion), with a water removal of 12.5 % and specific flux of ∼100 g·h m., This work was financially supported by the Spanish Government (SVP-2014-068356, SVP-2014-068713, RTI2018-102161 and IJCI-2016-28330 grants) and Generalitat Valenciana (PROMETEO/2018/006 grant)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Copper surface-alloying of H2-permeable Pd-based membrane for integration in Fischer–Tropsch synthesis reactors

  • Escorihuela, Sara
  • Toldrá-Reig, Fidel
  • Escolástico Rozalén, Sonia
  • Murciano, Raúl
  • Martínez, Agustín
  • Serra Alfaro, José Manuel
Self-supported palladium tubular membranes are surface-functionalized and tested for the selective and controlled addition of H along a fixed-bed catalytic reactor for Fischer–Tropsch hydrocarbon synthesis (FTS). In order to avoid CO poisoning of the active sites of the metallic membrane at low working temperatures (~250 °C), a Cu-based protective layer is deposited on the outer surface of a tubular membrane by RF sputtering at room temperature. Upon thermal treatment in H, the Cu layer alloys with Pd on the membrane surface, as confirmed by means of XRD, FESEM and TEM, while the membrane assembly is fully functional, i.e. the negative effect of CO surface adsorption is highly diminished and the membrane provides an appropriate H flux (e.g. 12 ml/min·cm) under the harsh operation conditions practiced in FT synthesis. When the Cu-functionalized membrane is fully integrated in the FTS reactor (250 °C, 20 bar, 30% CO in feed), the membrane delivers a stable H permeation flux and enables to increase the yield of hydrocarbons in the range of gasoline (C–C) while reducing methane formation over a bifunctional CoRu/AlO-zeolite catalyst., This work was financially supported by the Spanish Government (SEV-2016-0683, SVP-2014-068356, FPU13/03478, RTI2018-102161 and IJCI-2016-28330 grants) and Generalitat Valenciana (PROMETEO/2018/006 grant).