Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Efecto de la relación atómica Cu:Pt en catalizadores para la reducción electroquímica de CO2

  • Gutiérrez Roa, Manuel
  • Pérez Rodríguez, Sara
  • Lascorz, L.
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
Comunicación oral presentada en la 9ª Jornada de Jóvenes Investigadores (Química y Física) de Aragón, celebrada en Zaragoza el 16 de diciembre de 2021, y organizada por la Sección Territorial de Aragón de la Real Sociedad Española de Química y la Real Sociedad Española de Física., En los últimos años, la reducción de CO2 por vía electroquímica ha emergido como una estrategia para la obtención de compuestos de alto valor añadido (alcoholes o hidrocarburos) con aplicaciones energéticas o como moléculas plataforma para la síntesis de otros productos químicos. Si bien el CO2 es una fuente de carbono abundante, la alta estabilidad de este compuesto dificulta su conversión en otros productos, ya que implica un aporte de energía significativo. Además, la reacción de electro-reducción de CO2 (CO2RR) tiene lugar a partir de un mecanismo de reacción complejo con diferentes rutas paralelas y con múltiples etapas de transferencia de electrones. En este contexto, la utilización de catalizadores activos y selectivos que aumenten la eficiencia de la reacción y modulen la formación del producto deseado resulta primordial. Los sistemas catalíticos basados en cobre han atraído mucha atención por su tendencia única a producir hidrocarburos y alcoholes, aunque requieren de altos sobrepotenciales para activar la molécula de CO2. Una solución prometedora es el uso de catalizadores bimetálicos entre este elemento y un metal noble (Pt), de forma que el Cu regule la selectividad y el Pt reduzca el sobrepotencial. En este trabajo se estudia el efecto del ratio atómico Cu:Pt en el comportamiento electroquímico para la CO2RR de catalizadores bimetálicos soportados sobre negro de carbono (CuPt/C, 20 % de cobre en peso). La síntesis consistió en la preparación de nanopartículas de Cu/C por impregnación y reducción con NaBH4. Posteriormente, el Pt se incorporó mediante desplazamiento galvánico, generando partículas bimetálicas CuPt/C [1]. Los electrocatalizadores CuPt/C fueron analizados mediante diversas técnicas (XRD, ICP, TEM), confirmando cargas metálicas similares a las nominales, así como la correcta deposición de las nanopartículas en la superficie del material carbonoso. Por otro lado, la actividad de los catalizadores hacia la CO2RR se evaluó por voltamperometría cíclica y cronoamperometría en una celda electroquímica de tres electrodos usando una disolución acuosa de KHCO3 0,1 M como electrolito [2]. Los experimentos demostraron la adecuada actividad para la reducción de CO2 de todos los catalizadores sintetizados. Además, mediante la realización de estudios de adsorción y oxidación de CO y CO2 reducido a diferentes potenciales, se analizó la naturaleza de las especies que intervienen en la CO2RR. A mayor presencia de Pt, los catalizadores presentaron una mayor actividad para la evolución de hidrógeno y para la adsorción de especies derivadas de la reducción de CO2 (CO), mientras que la formación de formiato a partir de la CO2RR fue más favorable en fracciones atómicas Cu:Pt de 95:5 y 95:10., Los autores desean agradecer al Ministerio de Ciencia e Innovación la financiación recibida con el proyecto de referencia PID2020-115848RB-C21 y al Gobierno de Aragón por la financiación al grupo T06-20R. S. Pérez-Rodríguez agradece además al MCIN/AEI /10.13039/501100011033 por la concesión de su contrato Juan de la Cierva-Incorporación (IJC2019-041874-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Catalizadores basados en materiales no críticos para pilas de combustible

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
1 Figura, 1 Tabla.-- Resumen del póster presentado en la 9ª Jornada de Jóvenes Investigadores de Química y Física de Aragón, celebrada el 16 de diciembre de 2021, en Zaragoza., Uno de los mayores retos en la tecnología de pilas de combustible es la disminución del coste de los sistemas catalíticos mediante la sustitución de los catalizadores basados en Pt, un metal considerado crítico, por otros basados en metales de transición abundantes y económicos. Los catalizadores de Fe coordinados con nitrógeno y carbono (Fe-N-C) son los más activos para la reacción de reducción de oxígeno (ORR), la reacción limitante en las pilas de combustible [1]. En este trabajo se propone el uso de xerogeles de carbono dopados con nitrógeno como matriz carbonosa de catalizadores Fe-N-C con el objetivo de analizar el efecto del dopado con nitrógeno en la actividad de los catalizadores. Los N-CXG se han sintetizado por vía sol-gel a partir de resorcinol (R), formaldehído y urea (U), variando la relación U/R. Posteriormente, el Fe se ha introducido mediante síntesis mecánica con un molino de bolas planetario, seguido de un tratamiento a alta temperatura en atmósfera inerte [2]. Los catalizadores obtenidos, denominados como Fe-N-CXG-X (X = Ratio U/R) se han caracterizado mediante espectroscopía foto-electrónica de rayos X (XPS) y análisis elemental. La actividad hacia la ORR de los catalizadores obtenidos se ha determinado en una celda de tres electrodos con electrodo de disco rotatorio (RDE) en medio ácido. El presente estudio demuestra que la cantidad de nitrógeno del xerogel (ratio U/R) y el tipo de nitrógeno introducido, determina la actividad del catalizador hacia la ORR, puesto que condiciona la cantidad de sitios activos formados, siendo el catalizador Fe-N-CXG-1 -con mayor % de N y mayor % de este en forma de Npiridínico y grafítico-, el más activo., Los autores desean agradecer al Ministerio de Ciencia e Innovación la financiación recibida con el proyecto de referencia PID2020-115848RB-C21 y al Gobierno de Aragón por la financiación al grupo T06-20R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Catalizadores bifuncionales como electrodos positivos de baterías hierro-aire

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Martínez Visus, Íñigo
  • Lázaro Elorri, María Jesús
1 figura.-- Resumen del póster presentado en la 9ªJornada de Jóvenes Investigadores de Química y Física de Aragón, celebrada en Zaragoza el 16 de diciembre de 2021., Las baterías hierro-aire son sistemas prometedores para el almacenamiento de energía. Entre sus ventajas destaca su bajo impacto ambiental y coste, la alta disponibilidad de sus materias primas y su elevada energía específica teórica, 765 Wh/kgFe [1]. En el electrodo positivo de estas baterías se realiza, durante la carga, la reacción de evolución de oxígeno (OER) y, durante la descarga, la reacción de reducción de oxígeno (ORR). Estas reacciones son lentas, por lo que requieren de un catalizador que sea capaz de llevar a cabo ambas reacciones (bifuncional). En este trabajo se estudian composites de nanofilamentos de dióxido de manganeso dopados con hierro (Fe- MONW) y nanofibras de carbono (CNF) como catalizadores bifuncionales. Los MONW se obtuvieron por un método hidrotermal y las CNF mediante descomposición catalítica de metano; posteriormente se mezclaron mecánicamente en un molino de bolas (Fe-MONW/CNF). La actividad electroquímica de los catalizadores se evaluó en una celda de tres electrodos con un electrodo de disco rotatorio (RDE). Los nanofilamentos son de fase cristalina α-MnO2, que ha mostrado ser la más activa para la ORR y la OER, y tienen un área cercana a los 25 m /g, con diámetros que se aproximan a los 100 nm. Las nanofibras tienen estructura fishbone, con diámetros de aproximadamente 60-90 nm y áreas superficiales de 90 m /g. Los composites mostraron mayor actividad catalítica tanto para la ORR como para para la OER que las nanofibras y que los nanofilamentos por separado (Figura 1), así como mayor actividad que el catalizador comercial para la OER (IrO2)., Los autores agradecen la financiación del proyecto PID2020-115848RB-C21 del Ministerio de Ciencia e Innovación y al Grupo DGA T06-20R. N. Villanueva agradece al Gobierno de Aragón su contrato pre- doctoral. ________________
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Fieltros modificados con grafeno y nitrógeno como electrodos en baterías de flujo redox

  • Molina Serrano, Antonio J.
  • Luque-Centeno, José Manuel
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Carrasco Marín, Francisco
  • Lázaro Elorri, María Jesús
1 figura.-- Resumen del póster presentado en la 9ª Jornada de Jóvenes Investigadores de Química y Física de Aragón, celebrada en Zaragoza, el 16 de diciembre de 2021., Las baterías de flujo redox (BFR) son una de las tecnologías más prometedoras para el almacenamiento de energía renovable a gran escala. Las BFR se basan en las reacciones electroquímicas reversibles de dos pares redox disueltos en un electrolito (como el vanadio) que se almacena en tanques externos. Los electrodos, generalmente fieltros de carbono, son el componente central de la batería. En su superficie se llevan a cabo las reacciones de oxidación y reducción de los pares redox, lo que condiciona la densidad de potencia y la eficiencia energética de la batería [1]. Este trabajo tiene como objetivo la modificación de fieltros de carbono con óxido de grafeno reducido dopado con nitrógeno y su estudio como electrodos positivo y negativo en baterías de flujo redox de vanadio. El óxido de grafeno (GO) se obtuvo mediante la exfoliación de grafito en polvo comercial mediante un método Hummers modificado [2]. El dopaje con N se llevó a cabo mezclando el GO con urea y tratándolo térmicamente en una atmósfera de N2 a diferentes temperaturas (N-rGO-T). El comportamiento electroquímico de los materiales obtenidos se midió en una celda de 3 electrodos. Las voltamperometrías cíclicas muestran una clara influencia de la temperatura del tratamiento térmico. Se puede observar una mejora progresiva de la corriente al aumentar la temperatura del tratamiento térmico, obteniendo el mejor resultado en el material tratado a 800 °C., Los autores agradecen la financiación del CSIC a la Plataforma Temática Interdisciplinar PTI-FLOWBAT. A. Molina agradece al Ministerio de Universidades su contrato pre-doctoral FPU. Y al Gobierno de Aragón por la financiación al grupo T06-20R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of nitrogen and sulfur doping of carbon xerogels on the performance and stability of counter electrodes in dye sensitized solar cells

  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Girolamo, M.
  • Aricò, Antonino Salvatore
  • Baglio, Vincenzo
6 figures, 3 tables., In this work, carbon xerogels (CXGs) doped with nitrogen or sulfur have been investigated as DSSC counter electrodes. CXGs have been prepared by a sol–gel method from resorcinol and formaldehyde and subsequent carbonization. Nitrogen doping has been carried out by introducing melamine into the synthesis process along with resorcinol and formaldehyde, while sulfur has been incorporated by direct reaction of the carbon material with elemental sulfur. The counter electrodes for DSSCs have been prepared by airbrushing on conductive glass (fluorine-doped tin oxide, FTO), and their electrochemical behavior has been evaluated, observing that the introduction of heteroatoms such as nitrogen or sulfur leads to an improvement in efficiency compared to the undoped material thanks to a decrease in charge transfer resistance., This research was funded by PON Ricerca e Innovazione 2014–2020-PROGETTO ARS01_00334 NAUSICA-NAvi efficienti tramite l’Utilizzo di Soluzioni tecnologiche Innovative e low Carbon-Area di Specializzazione: Mobilità Sostenibile. CSIC authors wish to thank the Government of Aragon for funding the T06-20R group., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Effect of nitrogen doping method on the activity of Fe-N-C catalysts based on carbon xerogels for fuel cells

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Napal, Pedro F.
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
3 figures, 1 table.-- Work presented at the EHEC 2022, European Hydrogen Energy Conference, 18-20 May, 2022. Madrid, Spain., The development of active and inexpensive non-precious metal catalysts is a necessary and essential requirement to replace currently used Pt-based catalysts, in order to reduce the cost of polymer electrolyte fuel cells(PEFC). [1] Catalysts based on the Fe-N-C structure develop high electroactivity towards the oxygen reduction reaction (ORR), the limiting reactionin fuel cells. To increase the catalysts activity, Fe must be dispersedin acarbon material with a high surfacearea.In this context, carbon xerogels are excellent candidates, as their main properties can be easily tailored: porosity, electrical conductivity and surface chemistry. [2] The meso/macroporosity of carbon xerogels can be designed by modifying the conditions of the synthesis process, while microporosity can be generated by subsequent carbonization/activation treatments [3].In the present work, on the basis of carbon xerogels with an optimal ratio of micro/meso/macroporosity, we investigate the effect of two different methods of nitrogen-doping in the catalytic activity of Fe-N-C catalysts. Catalysts are evaluated both in half-cell and single-cell configurations and their activity is correlated to their physical-chemical features., The authors wish to thank the Ministry of Science and Innovation and the AEI(MCIN/AEI/10.13039/501100011033) for the funding received with the reference project PID2020-115848RB-C21 and the Government of Aragon for funding the T06-20R group. L. Álvarez-Manuel wish to thank the Government of Aragon for her pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Iron electrodes based on sulfur-modified iron oxides with enhanced stability for iron-air batteries

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Rubín, Javier
  • Figueredo-Rodríguez, H. A.
  • McKerracher, Rachel
  • Ponce de León, Carlos
  • Lázaro Elorri, María Jesús
7 figures.-- Supporting information available., Iron–air systems are a very promising technology with the potential to become one of the cheapest and safest energy storage solutions of the future. However, iron anodes still face some challenges like passivation, resulting in loss of capacity, due to the formation of nonconductive species during cycling as well as the hydrogen evolution reaction, a parasitic reaction interfering with the charging of the electrode. In the present work these two issues are addressed: Sulfur-modified mesoporous iron oxides are obtained and used as hot-pressed negative electrodes for alkaline iron–air batteries. Iron electrodes present average capacity values between 400 and 500 mA h g Fe–1 for ∼100 h of operation, the S-modified iron oxides being the most stable ones. An exponential deactivation model fitting the discharge capacity of the different electrodes compared to the number of cycles was proposed. According to the model, the best of the electrodes loses less than 0.5% of its capacity per cycle. Furthermore, doubling the charge and discharge rates allows increasing both the discharge capacity and the Coulumbic efficiency, though at the expense of stability. This manuscript proves that the proper distribution of sulfur on the surface of the iron oxide is fundamental to suppress the HER and passivation, enhancing the stability of the electrode. These properties were further corroborated in long test-runs which comprised more than 400 h of charging and discharging., The authors acknowledge the financial support from the Aragón Government to the Fuel Conversion Group (Grant T06-20R). C.A. also acknowledges MICINN for her Juan de la Cierva Contract IJCI-2017-32354. N.V. acknowledges the Aragón Government for his predoctoral contract and Ibercaja and Erasmus programs for the funding of his research stay in the University of Southampton in July 2018., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Bifunctional oxygen electrocatalysts based on non-critical raw materials: carbon nanostructures and iron-doped manganese oxide nanowires

  • Villanueva-Martínez, N. I.
  • Alegre, C.
  • Martínez-Visus, I.
  • Lázaro, M. J.
Alkaline metal-air batteries are unique systems for energy storage. These devices require a bifunctional catalyst in the positive electrode that must perform both the oxygen evolution and reduction reactions (OER and ORR, respectively). Generally, cobalt-based oxides are employed as air electrodes; however, cobalt is a critical raw material. Future battery devices will mandatorily need non-critical raw materials based on highly abundant metals. Here we investigate the feasibility of iron-doped manganese oxide in the form of nanowires (Fe-MONW) combined with carbon nanofibers. MnO2 is known for being active for the ORR, however its activity towards the OER is not yet fully understood. Carbon nanofibers (CNF) on the other hand, provide the necessary electrical conductivity to the catalytic system. Simple methods and economic materials are employed to synthesize the Fe-MONW/CNF composites. Our results show that there is a synergistic effect between CNF and MONW, especially for the ORR, which manifests in an increase in the number of exchanged electrons– from 2.9 to 3.5 – and a shift in the onset potential of 70 mV. Doping MONW with iron further enhances the catalytic activity, for both the ORR and OER. Fe ions generate defects in the manganese oxide structure, favoring the adsorption of oxygen and eventually enhancing the catalytic activity. Fe-doped-MONW shows onset potentials for OER comparable to the benchmark catalyst, IrO2. The improvement on the catalytic activity is particularly evident in terms of the reversibility gap, ΔE. ΔE is the difference between the potential when the current density is 10 mA cm−2 in OER and the half-wave potential for the ORR, being a fundamental parameter to assess the performance of metal-air batteries. The reversibility gap for the best catalyst, 5Fe-MONW/CNF, is ΔE = 922 mV (140 mV lower than non-doped MONW/CNF and between 160 and 320 mV lower than the individual components, MONW and CNF). Endurance tests show remarkable stability of the iron-doped MONW/CNF, with a stable potential and an even lower ΔE of 800 mV for ca. 20 h of operation (charge-discharge cycles at ± 10 mA cm−2).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Investigation of the properties influencing the deactivation of iron electrodes in iron-air batteries

  • Villanueva-Martínez, Nicolás I.
  • Alegre, Cinthia
  • Rubín, Javier
  • Mckerracher, Rachel
  • de León, Carlos Ponce
  • Rodríguez, Horacio Antonio Figueredo
  • Lázaro, María Jesús
Iron-air batteries hold the potential to be a key technology for energy storage, thanks to their energy density, low cost, safety and abundance of their materials. In order to scale the technology up and optimize the cell formulations, it is key to obtain a clear understanding of how the physical-chemical properties of the electrode influence their electrochemical behaviour, in particular, the capacity loss. In this work, we propose for the first time mathematical correlations between textural and crystallographic properties of iron electrodes and their electrochemical stability. By adjusting synthesis parameters, we were able to tune pore size and volume, surface area and crystal size of iron oxides, and found that stability is highly correlated to both surface area and pore size. Large surface area and small average pore size provide electrodes with enhanced stability. We hypothesize that the cause for deactivation is the passivation of the electrodes ascribed to the formation of a non-conductive, non-reactive iron (II) hydroxide layer during discharge, which then cannot be reduced to iron again. We validate this hypothesis with electrochemical impedance spectroscopy studies, which show that, in the more stable electrodes, the charge transfer resistance in the Fe(OH)2 to Fe reduction does not significantly change after cycling, contrary to the behaviour of the less stable electrodes, corroborating our hypothesis. Furthermore, the electrode with the best properties was cycled 100 times, retaining almost 75% of its initial capacity at the end of the 100 cycles. These results are highly relevant for the future design and operation of iron-air batteries.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Iron Electrodes Based on Sulfur-Modified Iron Oxides with Enhanced Stability for Iron–Air Batteries

  • Villanueva, Nicolás
  • Alegre, Cinthia
  • Rubin, Javier
  • Figueredo-Rodríguez, Horacio A.
  • McKerracher, Rachel D.
  • de León, Carlos Ponce
  • Lázaro, María Jesús
Iron–air systems are a very promising technology with the potential to become one of the cheapest and safest energy storage solutions of the future. However, iron anodes still face some challenges like passivation, resulting in loss of capacity, due to the formation of nonconductive species during cycling as well as the hydrogen evolution reaction, a parasitic reaction interfering with the charging of the electrode. In the present work these two issues are addressed: Sulfur-modified mesoporous iron oxides are obtained and used as hot-pressed negative electrodes for alkaline iron–air batteries. Iron electrodes present average capacity values between 400 and 500 mA h g Fe–1 for ∼100 h of operation, the S-modified iron oxides being the most stable ones. An exponential deactivation model fitting the discharge capacity of the different electrodes compared to the number of cycles was proposed. According to the model, the best of the electrodes loses less than 0.5% of its capacity per cycle. Furthermore, doubling the charge and discharge rates allows increasing both the discharge capacity and the Coulumbic efficiency, though at the expense of stability. This manuscript proves that the proper distribution of sulfur on the surface of the iron oxide is fundamental to suppress the HER and passivation, enhancing the stability of the electrode. These properties were further corroborated in long test-runs which comprised more than 400 h of charging and discharging.