Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Evaluation of new antimicrobial materials incorporating ethyl lauroyl arginate or silver into different matrices, and their safety in use as potential packaging

  • Manso, S.
  • Wrona, M.
  • Salafranca, J.
  • Nerín, C.
  • Alfonso, M.J.
  • Caballero, M.Á.
A big challenge for today’s industry is antimicrobial preservation and the safety of food. An effective solution to this problem can be a modern invention such as antimicrobial packaging. In the presented research the antimicrobial activity of two new active films incorporating silver, as IONPURE IPL, and ethyl lauroyl arginate (LAE) were evaluated, by employing a low-density polyethylene (LDPE) matrix and a biofilm material, respectively. Additionally, LAE was also incorporated into polystyrene (PS) pads by two different methods: by spraying and by immersion of the PS pads into an aqueous LAE solution. LDPE films containing silver did not show any antimicrobial activity against Escherichia coli and Aspergillus flavus, whereas the biofilm containing LAE reduced the growth of Salmonella enterica but did not inhibit Aspergillus flavus. The active PS pads, both sprayed and immersed in LAE solution, also showed antimicrobial activity, causing a reduction of 99.99% of Pseudomonas putida growth. Thermal treatment at 180¿C for 6 and 15 min did not modify the antimicrobial activity of LAE against Salmonella enterica. Moreover, inductively coupled plasma-mass spectrometry (ICP-MS) analysis was performed to check the migration of silver from developed material intended for food packaging applications into food simulant.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Atmospheric Solids Analysis Probe (ASAP) and Atmospheric Pressure Gas Chromatography (APGC) coupled to Quadrupole Time of Flight Mass Spectrometry (QTOF-MS) as alternative techniques to trace aromatic markers of mineral oils in food packaging

  • Jaén, J.
  • Domeño, C.
  • Alfaro, P.
  • Nerín, C.
The aim of this work was to select and identify the best markers of aromatic hydrocarbon mineral oil (MOAH) in food packaging. For this purpose, a series of mineral oils was initially analysed. Polycyclic Aromatic Hydrocarbons (PAHs) and the alkylated isomers of Methylnaphthalene (MNS), Diisopropylnaphtalene (DIPNs), Dibenzothiophenes (DBTS), Methyldibenzothiophene (MDBTs), Dimethyldibenzothiophenes (DMDBTs) and Benzonaphthiophenes (BNTS) were then explored. Their presence was confirmed by direct analysis of several mineral oils by Atmospheric Solids Analysis Probe Quadrupole-Time of Flight Mass Spectrometry (ASAP-QTOF-MS). Atmospheric Pressure Gas Chromatography Quadrupole-Time of Flight Mass Spectrometry (APGC-QTOF-MS) was used to confirm the markers in different samples of oils, recycled PET (rPET), recycled cardboard and packaging of couscous and semolina to confirm the contamination. 27 markers were found in the mineral oil samples, 22 of them in rPET, 8 in recycled board and no MOAH were found in packaging of couscous and semolina.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analysis of potential migration compounds from silicone molds for food contact by SPME-GC-MS

  • Asensio, Esther
  • Uranga, Joaquín
  • Nerín, Cristina
Four commercially available silicone cupcake molds have been studied. An evaluation of the post-cure treatment applied to the silicone molds was carried out and the loss of volatile organic compounds after cure treatment was quantified. The two higher quality molds showed losses at the 0.5% (w/w) (recommended by BfR standard), while the two lower quality molds exceeded this limit. The migration studies were carried out using Tenax® as a solid food simulant. The volatile compounds that migrate were identified and quantified using SPME-GC-MS. Up to fourteen silicone oligomers were quantified. When the molds were subjected to post-cure treatment, none of them exceeded the global migration of 10 mg/dm2; while those lower quality molds showed migrations higher than 10 mg/dm2, so their use in contact with food is not recommended.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Prediction of collision cross section values: application to non-intentionally added substance identification in food contact materials

  • Song, X. -C
  • Dreolin, N.
  • Damiani, T.
  • Canellas, E.
  • Nerin, C.
The synthetic chemicals in food contact materials can migrate into food and endanger human health. In this study, the traveling wave collision cross section in nitrogen values of more than 400 chemicals in food contact materials were experimentally derived by traveling wave ion mobility spectrometry. A support vector machine-based collision cross section (CCS) prediction model was developed based on CCS values of food contact chemicals and a series of molecular descriptors. More than 92% of protonated and 81% of sodiated adducts showed a relative deviation below 5%. Median relative errors for protonated and sodiated molecules were 1.50 and 1.82%, respectively. The model was then applied to the structural annotation of oligomers migrating from polyamide adhesives. The identification confidence of 11 oligomers was improved by the direct comparison of the experimental data with the predicted CCS values. Finally, the challenges and opportunities of current machine-learning models on CCS prediction were also discussed. © 2022 The Authors. Published by American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A collision cross section database for extractables and leachables from food contact materials

  • Song, Xue-Chao
  • Canellas, Elena
  • Dreolin, Nicola
  • Goshawk, Jeff
  • Nerin, Cristina
The chemicals in food contact materials (FCMs) can migrate into food and endanger human health. In this study, we developed a database of traveling wave collision cross section in nitrogen ((CCSN2)-C-TW) values for extractables and leachables from FCMs. The database contains a total of 1038 (CCSN2)-C-TW values from 675 standards including those commonly used additives and nonintentionally added substances in FCMs. The (CCSN2)-C-TW values in the database were compared to previously published values, and 85.7, 87.7, and 64.9% M + H](+), M + Na](+), and M - H](-) adducts showed deviations <2%, with the presence of protomers, post-ion mobility spectrometry dissociation of noncovalent clusters and inconsistent calibration are possible sources of CCS deviations. Our experimental (CCSN2)-C-TW values were also compared to CCS values from three prediction tools. Of the three, CCSondemand gave the most accurate predictions. The (CCSN2)-C-TW database developed will aid the identification and differentiation of chemicals from FCMs in targeted and untargeted analysis.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Migration of mineral oil aromatic hydrocarbons (MOAH) from cardboard containers to dry food and prediction tool

  • Jaén, J.
  • Domeño, C.
  • Úbeda, S.
  • Aznar, M.
  • Nerín, C.
This research aimed to study the migration of mineral oil aromatic hydrocarbons (MOAH) from primary carton packages to dry foods, using 16 aromatic hydrocarbons as model substances, covering a wide range of molecular masses and chemical structures. Migration experiments were performed using modified polyphenylene oxide as a food simulant and couscous and polenta as dry foods. The migration tests were carried out to simulate storage at room temperature for long periods and in hot food containers as the worst scenario. Multivariate analysis algorithms were applied to correlate and group the migration of model substances, and a partial least squares regression (PLSR) model was built to predict the worst-case migration. The results showed strong correlations in the migration patterns of the model substances, based on their volatility, food matrix, migration time and temperature. Different behaviour between the migration of the most volatile and the heaviest model substances was observed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Development of an analytical method for the determination of mineral oil aromatic hydrocarbons (MOAH) from printing inks in food packaging

  • Jaén, Janira
  • Domeño, Celia
  • Nerín, Cristina
An analysis method was developed to detect chemical markers of mineral oil aromatic hydrocarbons (MOAH) from offset printing inks in food packaging materials. 16 aromatic hydrocarbons were used as target analytes and different solid phase extraction procedures (SPE) and gas chromatography coupled to mass spectrometry (GC–MS) were tested. The concentration range studied was 0.1–7.5 µg g−1 with R2 higher than 0.9963, intraday RSD values below 5 %, RSD values between days lower than 12 %, recoveries higher than 80 %, LOD and LOQ lower than 0.09 μg g−1. Ten of the target analytes were identified in offset printing inks at concentrations between 2.28 and 8.59 µg g−1. Nine of them were also identified in the food packages examined in concentrations ranging from 0.10 to 0.33 µg g−1. These compounds were: methylnaphthalene, 2-methylnaphthalene, biphenyl, 2,6-dimethylnaphthalene, acenaphthene, 3,3′,5,5′-tetramethylbiphenyl, 4,6-dimethyldibenzothiophene, 1-methylpyrene, benzo(b)naphtha(1,2-d)thiophene and 9,9′-dimethylfluorene. Mineral oil in food packaging was previously analysed by GC with flame ionization detection (FID).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Comparison of LC-ESI, DART, and ASAP for the analysis of oligomers migration from biopolymer food packaging materials in food (simulants)

  • Osorio, Jazmín
  • Aznar, Margarita
  • Nerín, Cristina
  • Elliott, Christopher
  • Chevallier, Olivier
Biopolymers based on polylactic acid (PLA) and starch have numerous advantages, such as coming from renewable sources or being compostable, though they can have deficiencies in mechanical properties, and for this reason, polyester resins are occasionally added to them in order to improve their properties. In this work, migration from a PLA sample and from another starch-based biopolymer to three different food simulants was studied. Attention was focused on the determination of oligomers. The analysis was first performed by ultraperformance liquid chromatography quadrupole-time-of-flight mass spectrometry (UPLC-Q-TOF–MS), which allowed the identification of the oligomers present in migration. Then, the samples were analyzed by two ambient desorption/ionization techniques directly coupled to mass spectrometry (ADI), direct analysis in real-time coupled to standardized voltage and pressure (DART-MS) and atmospheric pressure solids analysis probe (ASAP-MS). These methodologies were able to detect simultaneously the main oligomers migrants and their adducts in a very rapid and effective way. Nineteen different polyester oligomers, fourteen linear and five cyclic, composed of different combinations of adipic acid [AA], propylene glycol [PG], dipropylene glycol [DPG], 2, 2-dibutyl-1, 3-propanediol [DBPG], or isobutanol [i-BuOH] were detected in migration samples from PLA. In migration samples from starch-based biopolymer, fourteen oligomers from poly(butylene adipate co-terephthalate) polyester (PBAT) were identified, twelve cyclic and two linear. The results from ADI techniques showed that they are a very promising alternative tool to assess the safety and legal compliance of food packaging materials. Graphical abstract: [Figure not available: see fulltext.].
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Migration of mineral oil aromatic hydrocarbon (MOAH) from hot melt adhesives used in food packaging materials

  • Jaén, Janira
  • Domeño, Celia
  • Vera, Paula
  • Nerín, Cristina
This article studies the migration of MOAH from hot melt adhesives used in multilayer laminates into food simulants. First, the initial concentration of a group of compounds selected as MOAH markers in several adhesives was determined by headspace solid phase microextraction coupled to gas chromatography mass spectrometry (HS-SPME-GC-MS), using the previously optimised method. Then, the migration of the MOAH fraction and MOAH markers from the laminates was studied. The MOAH fraction was analysed by gas chromatography with flame ionisation detection (GC-FID), and the MOAH markers were analysed by HS-SPME-GC-MS. Twelve MOAH markers were detected, and their initial concentrations were between 0.46 and 33.8 μg g-1. Only eight were identified after migration, ranging between 0.62 and 21.33 μg dm-2, with a migration percentage of 12–75%. The fraction of MOAH that migrated eluted mainly in the C16-C25 range and reached concentrations of 19.65 μg dm-2 from the laminate.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Prediction of Collision Cross-Section Values for Extractables and Leachables from Plastic Products

  • Song, Xue-Chao
  • Dreolin, Nicola
  • Canellas, Elena
  • Goshawk, Jeff
  • Nerin, Cristina
The use of ion mobility separation (IMS) in conjunction with high-resolution mass spectrometry has proved to be a reliable and useful technique for the characterization of small molecules from plastic products. Collision cross-section (CCS) values derived from IMS can be used as a structural descriptor to aid compound identification. One limitation of the application of IMS to the identification of chemicals from plastics is the lack of published empirical CCS values. As such, machine learning techniques can provide an alternative approach by generating predicted CCS values. Herein, experimental CCS values for over a thousand chemicals associated with plastics were collected from the literature and used to develop an accurate CCS prediction model for extractables and leachables from plastic products. The effect of different molecular descriptors and machine learning algorithms on the model performance were assessed. A support vector machine (SVM) model, based on Chemistry Development Kit (CDK) descriptors, provided the most accurate prediction with 93.3% of CCS values for M + H](+) adducts and 95.0% of CCS values for M + Na](+) adducts in testing sets predicted with <5% error. Median relative errors for the CCS values of the M + H](+) and M + Na](+) adducts were 1.42 and 1.76%, respectively. Subsequently, CCS values for the compounds in the Chemicals associated with Plastic Packaging Database and the Food Contact Chemicals Database were predicted using the SVM model developed herein. These values were integrated in our structural elucidation workflow and applied to the identification of plastic-related chemicals in river water. False positives were reduced, and the identification confidence level was improved by the incorporation of predicted CCS values in the suspect screening workflow.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The migration of NIAS from ethylene-vinyl acetate corks and their identification using gas chromatography mass spectrometry and liquid chromatography ion mobility quadrupole time-of-flight mass spectrometry

  • Vera, Paula
  • Canellas, Elena
  • Nerín, Cristina
  • Dreolin, Nicola
  • Goshawk, Jeff
An exhaustive migration study of eight corks, made of ethylene–vinyl acetate, was carried out to identify any non-volatile and volatile compounds using an untargeted approach. The challenge associated with the structural elucidation of unknowns was undertaken using both ultra-high-performance liquid chromatography coupled to an ion-mobility separation quadrupole-time of flight mass spectrometer and gas chromatography mass spectrometry. A total of fifty compounds were observed to migrate from the corks, and among these additives such as antioxidants (Butyl 4-hydroxybenzoate, Irganox 1010, Irganox 1075, Irgafos 168 and BHT) or lubricants (EBO and octadecanamide, N,N'-1,2-ethanediylbis-) were identified. A high proportion (84%) of the detected compounds was non-intentionally added substances (NIAS), and included several cyclic oligomers with different chain sequences. NIAS, such as 2,6-bis(1,1-dimethylethyl)-4-ethyl and 7,9-ditert-butyl-1-oxaspiro[4.5]deca-6,9-diene-2,8-dione, break-down products, including hexa-, hepta- and nonadecanamide, N,N'-1,2-ethanediylbis-, and oxidation products were also identified. One cork was found to be unsuitable for use as a food contact material.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultra-high performance liquid chromatography coupled to ion mobility quadrupole time-of-flight mass spectrometry for the identification of non-volatile compounds migrating from ´natural´ dishes

  • Wrona, Magdalena
  • Román, Ana
  • Song, Xue-Chao
  • Nerín, Cristina
  • Dreolin, Nicola
  • Goshawk, Jeff
  • Asensio, Esther
Although most new biomaterials for food industry applications are labelled ‘100% natural fabrication’ and ‘chemical-free’, certain compounds may migrate from those materials to the food, compromis- ing the organoleptic characteristics and safety of the product. In this work, the degree of compound migration from dishes made with four different biomaterials: bamboo, palm leaf, wood and wheat pulp was investigated. Migration tests were carried out using three food simulants, 10% ethanol (sim- ulant A), 3% acetic acid (simulant B), and 95% ethanol (simulant D2). Unequivocal identification of non-intentionally added substances (NIAS) is challenging even when using high-resolution mass spectrometry techniques however, a total of 25 different non-volatile compounds from the migration tests were identified and quantified using Ultra-high performance liquid chromatography coupled to ion mobility quadrupole time-of-flight mass spectrometry (UPLC-IMS-MS). In the bamboo samples three oligomers, cyclic diethylene glycol adipate, 3,6,9,16,19,22-hexaoxabicyclo[22.3.1]-octacosa-1(28),24,26- triene-2,10,15,23-tetrone and 1,4,7,14,17,20-hexaoxacyclohexacosane-8,13,21,26-tetrone exceeded the specified limits of migration.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Migration of volatile substances from recycled high density polyethylene to milk products

  • Vera, Paula
  • Canellas, Elena
  • Su, Qi-Zhi
  • Mercado, Daniel
  • Nerín, Cristina
Plastic recycling is the main solution to reduce the plastic waste. High-density polyethylene has not been recycled yet successfully as food contact material due to the amount of chemicals present in post-consumer material together with its high chemical sorption capacity. The migration of two post-consumer recycled HDPE milk bottles were studied to both 50 % ethanol as food simulant and real food (one type skimmed milk and two plant base beverages (soy milk and horchata). Firstly, a headspace-solid phase extraction-gas chromatography mass spectrometry method was developed and optimized to analyze these milky samples. After exposure, 53 compounds were identified and among them several additives, NIAS such as 2,5-cyclohexadiene-1,4-dione, 2,6-bis(1,1-dimethylethyl), 2,4-di-tert-butylphenol and 7,9-di-tert-butyl-1-oxaspiro(4,5)deca-6,9-diene-2,8-dione, degradation products of antioxidant compounds as well as several residues from cleaning products, detergents and flavoring agents were found. Finally, the risk assessment was applied and it was found that five compounds did not comply after migration to 50 % ethanol.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Antibiofilm activity of LAE (ethyl lauroyl arginate) against food-borne fungi and its application in polystyrene surface coating

  • Becerril, R.
  • Precone, M.
  • Nerin, C.
Several filamentous fungi species as Fusarium oxysporum or Cladosporium sp. can form biofilms by themselves or by participating in polymicrobial biofilms with bacteria. However, despite the high impact of biofilm on the food industry and the high efforts done to control biofilm produced by bacteria in the food area, there has been little study of strategies to control fungal biofilm in this area. In this study, the antibiofilm activity of the safe antimicrobial compound ethyl lauroyl arginate (LAE) was investigated against food spoilage fungi (Cladosporium cladosporioides, Aspergillus ochraceus, Penicillium italicum, Botrytis cynerea and Fusarium oxyspoum). Finally, the efficacy of a varnish-based coating incorporating LAE and coated onto polystyrene microtiter plates has been evaluated as a strategy to reduce fungal biofilm formation. The results of the 2,3-bis-(2-metoxi-4-nitro-5-sulfofenil)-2H-tetrazoilo-5-carboxanilida (XTT) assay, which measure the biofilm metabolic activity of moulds, demonstrated that LAE reduced significantly the formation of fungal biofilm at concentrations from 6 to 25 mg/L. This reduction was confirmed by the micrographs obtained by scanning electronic microscopy (SEM). In addition, LAE also showed antifungal activity against established biofilms. Particularly, it reduced their metabolic activity and viability at concentrations from 6 to 25 mg/L according to results obtained in the XTT assay and observations made by confocal laser scanning microscopy (CLSM). Finally, active coating incorporating from 2% of LAE proved to reduce significantly the biofilm formation in C. cladosporioides, B. cynerea and F. oxyspoum according to the results obtained in the XTT assay. However, the released studies indicated that the retention of LAE in the coating should be improved to prolong their activity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Innovative surface-enhanced raman spectroscopy method as a fast tool to assess the oxidation of lipids in ground pork

  • Wrona, Magdalena
  • Lours, Juliette
  • Salafranca, Jesús
  • Joly, Catherine
  • Nerín, Cristina
A novel method for the determination of lipid oxidation using Raman microscopy was developed. A home-made surface-enhanced Raman spectroscopy (SERS) substrate based on silver nanoparticles deposited on a glass Petri dish was used. The degradation of ground pork stored at 5 °C was monitored for 16 days. Two packages were considered: an active packaging containing an oregano extract with antioxidant properties and a conventional one consisting of a low-density polyethylene (LDPE) film. The lipid fraction of the ground pork was extracted with a mixture of diethyl ether/n-hexane (1:1). A remarkable maximum signal enhancement factor of 1.64 × 107 at 1439 cm−1 shift (and up to 8.58 × 106 at 1655 cm−1, chosen for fat oxidation assessment) was obtained with SERS compared to conventional Raman. In addition, SERS provided better discrimination among samples than the results obtained by the thiobarbituric acid reactive substances (TBARS) method. The experimental conditions for SERS were optimized and discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Combination of structure databases, In silico fragmentation, and MS/MS libraries for untargeted screening of non-volatile migrants from recycled high-density polyethylene milk bottles

  • Su, Q.
  • Vera, P.
  • Nerín, C.
Chemical contamination is one of the major obstacles for mechanical recycling of plastics. In this article, we built and open-sourced an in-house MS/MS library containing more than 500 plastic-related chemicals and developed mspcompiler, an R package, for the compilation of various libraries. We then proposed a workflow to process untargeted screening data acquired by liquid chromatography high-resolution mass spectrometry. These tools were subsequently employed to data originating from recycled high-density polyethylene (rHDPE) obtained from milk bottles. A total of 83 compounds were identified, with 66 easily annotated by making use of our in-house MS/MS libraries and the mspcompiler R package. In silico fragmentation combined with data obtained from gas chromatography–mass spectrometry and lists of chemicals related to plastics were used to identify those remaining unknown. A pseudo-multiple reaction monitoring method was also applied to sensitively target and screen the identified chemicals in the samples. Quantification results demonstrated that a good sorting of postconsumer materials and a better recycling technology may be necessary for food contact applications. Removal or reduction of non-volatile substances, such as octocrylene and 2-ethylhexyl-4-methoxycinnamate, is still challenging but vital for the safe use of rHDPE as food contact materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

New active packaging based on encapsulated carvacrol, with emphasis on its odour masking strategies

  • Wrona, Magdalena
  • Manso, Sofía
  • Almeida E Silva, Filomena
  • Cardoso, Leticia
  • Salafranca, Jesús
  • Nerín, Cristina
  • Alfonso, María José
  • Caballero, Miguel Ángel
New active polyethylene packaging with both antioxidant and antimicrobial properties was designed and produced using three different concentrations of encapsulated carvacrol. Films containing 10%, 20% and 30% of active capsules showed strong antioxidant activity as hydroxyl (OH·) radical scavengers, while only films containing 30% capsules showed anti-Salmonella enterica activity. Storage of active packaging rolls in sealed aluminium bags maintained both the antioxidant and antimicrobial properties of the films for up to 9 months. Two strategies were used to control or eliminate the strong odour of the developed packaging materials: odour masking spray and multilayer packaging. Migration tests were carried out to assess the safety of packaging. The most successful strategy was the development of two active multilayer packaging materials (polyethylene terephthalate (PET)/adhesive/active low density polyethylene (LDPE) with 10% capsules and aluminium/adhesive/active LDPE with 10% capsules) which reduced the oxidation of packaged crisps stored at 60 °C for 30 days by up to 45%, measured as malonaldehyde using the TBARS assay. In addition, the packaging materials did not affect the organoleptic properties of the stored crisps as determined by sensory analysis. These results show that this novel bifunctional (antioxidant and antimicrobial) active packaging can protect fatty foods from oxidation processes while preserving their organoleptic properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Application of Ion mobility Spectrometry and the derived collision Cross Section in the Analysis of Environmental Organic Micropollutants

  • Song, Xue-Chao
  • Canellas, Elena
  • Dreolin, Nicola
  • Goshawk, Jeff
  • Lv, Meilin
  • Qu, Guangbo
  • Nerin, Cristina
  • Jiang, Guibin
Ion mobility spectrometry (IMS) is a rapid gas-phase separation technique, which can distinguish ions on the basis of their size, shape, and charge. The IMS-derived collision cross section (CCS) can serve as additional identification evidence for the screening of environmental organic micropollutants (OMPs). In this work, we summarize the published experimental CCS values of environmental OMPs, introduce the current CCS prediction tools, summarize the use of IMS and CCS in the analysis of environmental OMPs, and finally discussed the benefits of IMS and CCS in environmental analysis. An up-to-date CCS compendium for environmental contaminants was produced by combining CCS databases and data sets of particular types of environmental OMPs, including pesticides, drugs, mycotoxins, steroids, plastic additives, per- and polyfluoroalkyl substances (PFAS), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs), as well as their well-known transformation products. A total of 9407 experimental CCS values from 4170 OMPs were retrieved from 23 publications, which contain both drift tube CCS in nitrogen (DTCCSN2) and traveling wave CCS in nitrogen (TWCCSN2). A selection of publicly accessible and in-house CCS prediction tools were also investigated; the chemical space covered by the training set and the quality of CCS measurements seem to be vital factors affecting the CCS prediction accuracy. Then, the applications of IMS and the derived CCS in the screening of various OMPs were summarized, and the benefits of IMS and CCS, including increased peak capacity, the elimination of interfering ions, the separation of isomers, and the reduction of false positives and false negatives, were discussed in detail. With the improvement of the resolving power of IMS and enhancements of experimental CCS databases, the practicability of IMS in the analysis of environmental OMPs will continue to improve.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Determination of volatile migrants from breast milk storage bags

  • Aznar, Margarita
  • Domeño, Celia
  • Nerin, Cristina
Breast milk storage bags are commonly used to facilitate extended periods of breastfeeding. These bags must meet the necessary safety standards for infant food and comply with current regulations. As they are typically made from polyethylene and feature printing inks on their surface, there is a potential for the transfer of polymer and ink additives, as well as non-intentionally added substances (NIAS), into the milk. An initial study was conducted using two breast milk bags to identify the primary migrants that could be released from this particular food packaging. Migration tests were conducted in both milk and the corresponding food simulant D1 (50% ethanol/water, v/v) under conditions mimicking typical breast milk storage conditions (4–5ºC, 7 days) and defrosting conditions (40ºC, 2 h). The results showed the presence of volatile migrants in both situations, whether long storage periods at refrigerated conditions or brief periods if the temperature is not under control. The outcomes also highlighted that the primary migrants were breakdown products from Irgafos 168, a widely used trisarylphosphite-based antioxidant. These included 2,4-ditertbutylphenol (2,4-dtBP), 1,3-di-tert-butylbenzene (1,3-dtBB), and 2,6-di-tert-butyl-1,4-benzoquinone (2,6-dtBBQ). A subsequent study was carried out involving eight breast milk bags to evaluate the migration of these compounds and to conduct a comprehensive risk assessment of the materials used, ensuring the safety of infants' health is not compromised. Results showed that 1,3-dtBB exceeded the maximum recommended migration values in two of the studied bags. Nevertheless, further toxicity tests are necessary to ensure the safety of these materials in relation to food.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fabric phase sorptive extraction for specific migration analysis of oligomers from biopolymers

  • Ubeda, Sara
  • Aznar, Margarita
  • Nerin, Cristina
  • Kabir, Abizar
Oligomers are potential migrants from polymers or biopolymers intended to food packaging and they have to be under control. In order to comply with European regulation 10/2011, their concentration in migration must be below 0.01 mu g g(-1). In this work, fabric phase sorptive extraction (FPSE) was explored as an effective method for extraction and pre-concentration of oligomers migrated from a blend PLA-polyester material. Both food simulant B (3% acetic acid) and juice, as real food, were used for migration experiments. The parameters of FPSE were optimized and the analysis was done by UHPLC-QTOF and UHPLC-QqQ. A total of 21 oligomers were identified, 9 of them coming from PLA and 12 oligomers from the polyester part. These oligomers were formed by adipic acid (AA), phthalic acid (PA) and/or butanediol (BD), ten were cyclic and 11 were linear molecules. Using the optimized FPSE procedure in 3% acetic acid as food simulant, it was possible to identify 3 new compounds that were not detected by direct injection of the simulant into UHPLC-QTOF. In addition, 2 extra compounds, cyclic PA-BD4-AA(3) and cyclic PA(2)-BD3-AA, were only identified in juice samples after FPSE extraction. Besides, in order to quantify the compounds identified, an isolation procedure for PLA oligomers was carried out. Two oligomers were isolated: cyclic (LA)(6) and linear HO-(LA)(4)-H, both with a purity higher than 90% (LA: lactic acid). The highest concentration value was found for the cyclic oligomer [AA-BD](2), that showed 22.63 mu g g(-1) in 3% acetic acid and 19.64 mu g g(-1) in juice. The concentration of the total amount of remaining oligomers was below 7.56 mu g g(-1) in 3% acetic acid as well as in juice.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ceratonia siliqua L. kibbles, seeds and leaves as a source of volatile bioactive compounds for antioxidant food biopackaging applications

  • Ouahioune, Lidia Ait
  • Wrona, Magdalena
  • Becerril, Raquel
  • Salafranca, Jesus
  • Nerin, Cristina
  • Djenane, Djamel
Macerates of kibbles, seeds and leaves of Ceratonia siliqua L. were prepared and analysed to apply them for the development of a new multilayer active packaging. The profile of forty-three different bioactive volatile compounds was obtained employing headspace solid-phase microextraction (HS-SPME) coupled to gas chromatography-mass spectrometry (GC-MS). The antioxidant capacity was investigated using the following methods: 2, 2-diphenyl-1-picrylhydrazyl and phosphomolybdenum method, which demonstrated stronger antioxidant capacity in the case of seeds macerates. However, the analysis of the antimicrobial properties of the different macerates versus Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli revealed a weak antibacterial activity. Additionally, the different macerates were incorporated into an adhesive used to build a new biopackaging multilayer film based on cellulose polymer, whose antioxidant capacity was evaluated by two different methods (2, 2-diphenyl-1-picrylhydrazyl and hydroxyl radical assay). The films with the best antioxidant activity, containing carob seeds macerates, were selected for the food safety assessment through migration assay. The obtained results showed no migrants, neither in the case of the volatile compounds nor non-volatile ones. Besides, the CIE L*a*b* colour of the active films was evaluated. The obtained results are therefore promising for future production of active biopackaging at an industrial scale.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Decontamination efficiencies of post-consumer high-density polyethylene milk bottles and prioritization of high concern volatile migrants

  • Su Q.-Z.
  • Vera P.
  • Salafranca J.
  • Nerín C.
High-density polyethylene (HDPE) milk bottles are well-distinguished from other plastics in the mix-collected plastic waste and have potential to be closed-loop recycled. To evaluate this option, volatile substances present in various recycled HDPE (rHDPE) pellets and flakes from postconsumer milk bottles were analysed for similarities between different industrial recycling companies and batches. All substances found were classified in five different levels based on toxicity, from level I to level V (high toxicity). Chemicals present in the samples from different recyclers varied considerably, while those from different batches of a given recycler gave similar results. However, the study of rHDPE stream mixed with high volume of non-milk-bottles provided significant differences between batches. Washing the rHDPE twice and applying extra decontamination techniques reduced to a half the intensities for most chemicals detected, including two toxicity level V substances, butylated hydroxytoluene and diethyl phthalate. Nevertheless, other two high concern compounds, octocrylene, and 2-ethylhexyl-4-methoxycinnamate were not significantly reduced and thus deserve special attention when decontaminating rHDPE and evaluating its feasibility for food contact uses. Extra decontamination was able to reduce the intensities of 1-dodecene and 1-tetradecene. In total, 265 substances were detected in migration tests (95% ethanol and 3% acetic acid) and 58 of them were prioritized by toxicity. Regarding volatile migrants, rHDPE with low content of non-milk-bottle could be safe for direct contact with low-fat content food. For high-fat foods, the main concerns could come from 1-tetradecene, octocrylene, and 2-ethylhexyl-4-methoxycinnamate. © 2021 The Author(s)
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Design of new natural antioxidant active packaging: Screening flowsheet from pure essential oils and vegetable oils to ex vivo testing in meat samples

  • Wrona, M.
  • Silva, F.
  • Salafranca, J.
  • Nerín, C.
  • Alfonso, M.J.
  • Caballero, M.Á.
Two essential oils and seven vegetable oils were tested in an in situ generator of hydroxyl radicals for determining their antioxidant capacity. Then twenty-two different active LDPE films were prepared by incorporating both the essential oils and vegetable oils. The antioxidant capacity, heat-sealing properties and aroma of developed films were determined. The films with the best antioxidant properties, containing flaxseed oil, ginger essential oil, grape seed essential oil and rose oil, were selected and applied as active packaging for fresh meat and tested at industrial scale. The optimum packaging corresponded to 50 µm LDPE film with flaxseed oil which was able to extend by 22% the shelf-life of fresh meat. It was proven that the concentration of flaxseed oil was crucial for antioxidant capabilities of film. Finally, derivatisation was applied to evaluate stability of flaxseed oil packaging. Stability assays suggest that active films should be kept in closed aluminium bags to prevent flaxseed oil oxidation by air and light.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Study of bioactive volatile compounds from different parts of Pistacia lentiscus L. extracts and their antioxidant and antibacterial activities for new active packaging application

  • Djebari, S.
  • Wrona, M.
  • Boudria, A.
  • Salafranca, J.
  • Nerin, C.
  • Bedjaoui, K.
  • Madani, K.
Macerates of fruits and leaves of Pistacia lentiscus L. were prepared and analysed with the aim of applying them for active packaging. The profile of forty-four different bioactive volatile compounds was obtained by means of gas chromatography-mass spectrometry and solid-phase microextraction gas chromatography-mass spectrometry. Antioxidant capacity was evaluated by three different methods (2, 2-diphenyl-1-picrylhydrazyl, 2, 2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid and reducing power) which confirmed stronger antioxidant properties in case of leaves macerate. Total phenolic and flavonoids content was determined and showed that macerate leaves presented 15 times more phenolic compounds and 20 times more flavonoids than macerate fruit. Moreover, the analysis of antimicrobial properties of macerate leaves in comparison with macerate fruits revealed very strong antimicrobial properties. Finally, macerate leaves extract was incorporated in an adhesive and a new active multilayer packaging was designed, and its antioxidant capacity as free radical scavenger was confirmed by a method based on in situ hydroxyl radicals generator.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Migration of contaminants from printed masks for children to saliva simulant using liquid chromatography coupled to ion mobility-time of flight-mass spectrometry and gas chromatography-mass spectrometry

  • Canellas, Elena
  • Vera, Paula
  • Nerin, Cristina
  • Goshawk, Jeff
  • Dreolin, Nicola
The COVID-19 pandemic has led to children using polymeric FFP2 and polymeric surgical masks on a daily basis. Children often bite and suck on such masks as they wear them closed to their mouths. In this work, the migration of contaminants from printed and unprinted children`s masks to a saliva simulant has been studied. Liquid chromatography coupled to ion-mobility quadrupole time-of-flight mass spectrometry has been used for the detection and identification of non-volatile migrants. An orthogonal projection to latent structures – discriminant analysis (OPLS-DA) was applied to compare the data from the printed masks against the data from the unprinted ones. Headspace solid phase microextraction coupled to gas chromatography mass spectrometry was used to assess the migration of volatile compounds. Thirteen compounds were found in the masks with concentrations ranging from 5 ng/g to 254 ng/g. Toluene, chlorobenzene, irganox 1076 and 2-(2-butoxyethoxy)ethyl acetate were all found to migrate from the masks studied. Moreover, differences between the migrants from printed and unprinted FFP2 masks were found. Octocrylene, 4-(dimethylamine)benzoate, methyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate and tris(3-methylphenyl)phosphate were found to migrate only from printed masks. Toluene that migrated from all the masks studied and tris(3-methylphenyl)phosphate, that migrated only from printed masks, have been listed as hazardous priority substances.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Identification of volatile and non-volatile migrants released during sous vide cooking by UPLC-IMS-QTOF and DI-SPME-GC-MS using a design of experiments approach

  • Estremera, Carlos
  • Paiva, Robert
  • Aznar, Margarita
  • Nerín, Cristina
  • Domeño, Celia
The rise of new culinary advances combined with science has made it possible to find new optimum methods of cooking, such as vacuum cooking (Sous Vide), that allow achieving pleasant textures, preserving the genuine nature of the food and also its original flavour. Sous Vide involves the direct contact of plastic materials with food during cooking, causing the possible release of chemical compounds that may alter the properties of the food and pose a risk to human health. In this work, the migration kinetics that takes place during this cooking process have been estimated thanks to a design of experiments (DoE). DoE has been applied to 4 samples of vacuum cooking bags containing 3 food simulants (ethanol 10%, acetic acid 3% and isooctane) under typical cooking conditions of the culinary technique. The study also allowed the identification of the main volatile and non-volatile migrants that can be transferred from this particular packaging. Twenty-nine non-volatile species were identified by ultra-high performance liquid chromatography coupled to a quadrupole-time-of-flight ion-mobility separation mass spectrometer (UPLC-IMS-QTOF) and sixty-four volatile species were identified by solid-phase microextraction-gas chromatography-mass spectrometry (SPME-GC-MS). Furthermore, a comprehensive literature analysis was conducted to explore the applications, origins, and potential toxicity of these compounds.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Evaluation of new safety decontamination approaches at lab scale for recycled highdensity polyethylene (rHDPE) intended for food contact

  • Pérez-Bondía, Estela
  • Domeño, Celia
  • Nerín, Cristina
  • Aznar, Margarita
Background The increasing use of plastic packaging materials generates concerns related to the environmental problem generated by their waste. As a result, the search for new recycling methodologies to extend the lifecycle of plastic packaging is becoming more important, without forgetting to ensure the safety of these materials. Currently, the use of recycled polyolefins as food contact materials is not widespread yet. This is because the decontamination processes currently available are insufficient to produce clean, safe materials suitable for such applications. This work is focused on the evaluation of the safety of recycled high-density polyethylene (rHDPE), and the search for strategies to achieve its decontamination. Results To this end, three batches of flakes and three batches of pellets of rHDPE coming from the mechanical recycling of post-consumer milk bottles were analyzed. The analysis of the volatile and semi-volatile compounds present in the samples was carried out using gas chromatography-mass spectrometry (GC–MS), finding a total of 67 compounds. The strategy to achieve the decontamination of flakes and pellets of this material has been based on the application of high temperature and vacuum at lab scale, obtaining a clear decrease in volatile compounds, below 50% of the initial value in most cases when applying 120 °C during 5 h. The migration test performed in the samples (treated and untreated) to different food simulants (10 % ethanol and 3 % acetic acid, 95 % ethanol) revealed also a clear decrease of concentrations of volatiles. Significance The findings are highly encouraging, demonstrating substantial progress toward the safe and effective use of rHDPE in specific food packaging applications. This indicates a significant step forward in the potential uses of rHDPE. Nevertheless, the lack of toxicity data for many migrants necessitates additional toxicological testing to obtain a more precise risk assessment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Biobased polymer recycling: a comprehensive dive into the recycling process of PLA and its decontamination efficacy

  • Paiva, Robert
  • Aznar, Margarita
  • Wrona, Magdalena
  • de Lima Batista, Ana Paula
  • Nerín, Cristina
  • Cruz, Sandra A.
The recycling process and the presence of contaminants play important roles in alimentary security. In this research, poly(lactic acid) (PLA) samples were contaminated using an FDA-defined framework by immersing them in a cocktail of five surrogates (benzophenone, tetracosane, heptane, chloroform, and toluene). Migration tests were then conducted on the samples after different recycling stages by using two food simulants and varying conditions. To this end, it was used SPME–GC–MS and GC–MS techniques in order to evaluate the efficiency of the recycling technology. The contaminants in PLA samples decreased after they were submitted to the total recycling cycle. Compounds such as tetracosane, heptane, and toluene showed decreased values between 73 and 80%, much higher than those obtained when the sample went through only washing or mechanical recycling. The theoretical molecular volume of contaminants, the type of food simulants, the temperature of the test, and the interactions between the polymer and surrogates influence the input and output of contaminants. The interaction energy values estimated from electronic structure calculations prove to be useful for predicting and analyzing global interaction trends between contaminants and the polymer. Consistency was observed between the results obtained from the Hansen sphere analysis and the theoretical approach.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

How Carbodiimide Modulates Oligomer Migration and Molar Mass in Recycled Poly(lactic acid): A Study Using UPLC-QTOF-MS<sup>E</sup>

  • Paiva, Robert
  • Bonatti, Sophia H. F.
  • Estremera, Carlos
  • Wrona, Magdalena
  • Ramos, Vania Martins
  • de Lima Batista, Ana Paula
  • Staffa, Lucas H.
  • Nerín, Cristina
  • Cruz, Sandra A.
The recycling of polymers for direct food contact faces initial challenges due to the loss of molar mass and the generation of Non-Intentionally Added Substances (NIAS), among which oligomers are prominent. In this study, carbodiimide (CDI) was employed as an antihydrolysis agent and chain extender to prevent oligomer formation in the recycling of poly(lactic acid) (PLA). Mechanical recycling was performed on wet and dried PLA with varying concentrations of CDI using corotating intermeshing twin-screw extrusion. CDI contributed to the increase in polymer molar mass and influenced the kinetics of its nonquiescent crystallization. Moisture played a key role in this process, as CDI can react either with water molecules, preventing hydrolytic degradation, or with available sites on the PLA molecule, resulting in increased molar mass and a decrease in the oligomer content. Oligomer migration tests were conducted using three food simulants: ethanol 10%, acetic acid 3%, and ethanol 95%. Ultraperformance liquid chromatography coupled with a quadrupole time-of-flight mass spectrometer was utilized for qualitative and quantitative PLA oligomer analyses. Electronic structure calculations based on the GFN-xTB Hamiltonian were employed for structural optimizations and energies to understand migration and interaction processes in the described systems. Sixteen different PLA oligomers were detected in the food simulant samples. Linear oligomers were identified in all simulants, while cyclic were detected mainly in the 95% ethanol simulant. The antihydrolysis and chain-extending effects of CDI in recycled PLA reduced the total oligomer concentration in both wet and dry samples, improving the physicochemical properties of PLA and ensuring food safety.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Sustainable and green strategies for active biopackaging: Application for seafood products—A critical review

  • Ait Ouahioune, Lidia
  • Wrona, Magdalena
  • Pezo, Davinson
  • Nerín, Cristina
  • Djenane, Djamel
Packaging design and material innovation offer real opportunities to reduce seafood degradation within the supply chain. The growing environmental crisis and health burden caused by conventional packaging demands sustainable and biodegradable alternatives, which play a crucial role in the circular economy by promoting resource efficiency, waste reduction, product lifecycle optimization and the regeneration of natural systems. Although bio-based materials are considered renewable resources compared to conventional materials, they have limited applications, such as difficulty in processing, poor performance, high permeability and high costs associated with scaling up production. However, by understanding the critical limitations, targeted strategies can be developed to overcome them, such as blending these bio-based materials with other materials to improve their functionality, thereby increasing their applicability. In this context, this review provides a general insight into seafood packaging and discusses the latest strategies based on materials from natural sources. It is also discusses the existing limitations and potential future development prospects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Novel active biopackaging incorporated with macerate of carob (Ceratonia siliqua L.) to extend shelf-life of stored Atlantic salmon fillets (Salmo salar L.)

  • Ouahioune, Lidia Ait
  • Wrona, Magdalena
  • Nerín, Cristina
  • Djenane, Djamel
Two antioxidant bio-based packaging materials incorporated with an 8% aqueous solution of carob seed ethanol macerate (CSE) or 8% aqueous solution of carob seed acetone macerate (CSA) were developed. Fresh salmon fillets were packaged in active and control films and stored at refrigeration temperature at 4 ± 1 °C. The quality was evaluated by sensory analysis, color, pH, water holding capacity and drip loss, thiobarbituric acid reactive substances, and total volatile basic nitrogen. The CSE and CSA samples presented satisfactory off-odor and overall acceptability results than the control samples until the 5th storage day. For color analysis, active samples preserved better the characteristics of fresh salmon than the controls during the first storage days. The fresh salmon fillet covered with active packaging presented on the 5th storage day a lower values of pH (6.54 ± 0.05 and 6.60 ± 0.11), drip loss (3.17 ± 0.76 and 2.83 ± 0.29), thiobarbituric acid reactive substances (0.056 ± 0.033 and 0.088 ± 0.054) and total volatile basic nitrogen (30.04 ± 3.54 and 32.67 ± 4.81), whereas, the highest water holding capacity values (92.23 ± 1.09 and 92.91 ± 3.07) for CSE and CSA respectively, as compared to those of blank biopackaging. © 2021
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Response surface methodology and UPLC-QTOF-MSE analysis of phenolic compounds from grapefruit (Citrus¿ paradisi) by-products as novel ingredients for new antioxidant packaging

  • Kaanin-Boudraa G.
  • Brahmi F.
  • Wrona M.
  • Nerín C.
  • Moudache M.
  • Mouhoubi K.
  • Madani K.
  • Boulekbache-Makhlouf L.
The present work reports an experimental study on the optimization of phenolic compounds extraction from Citrus ¿ paradisi peels and the development of active packaging. Response surface methodology (RSM) was applied to investigate the effect of microwave-assisted extraction (MAE) for the recovery of total phenolic compounds (TPC). The TPC in the optimized extract were 31.10 mg gallic acid equivalent/100 g of dry weight (mg GAE/100 g dw) with strong antioxidant capacity. The bioactive compounds in the optimized extract were determined by ultrahigh performance liquid chromatography coupled to quadrupole time-of-flight with high energy mass spectrometry (UPLC-QTOF-MSE). Forty-five compounds were detected and qualified. The optimized extract obtained by MAE was used as an active antioxidant in multilayer food packaging films. The multilayer low-density polyethylene (LDPE)/polyethylene terephthalate (PET) containing 10% of MAE optimized extract provided the most antioxidant power acting as a free radical scavenger. © 2021 Elsevier Ltd
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The application of ion mobility time of flight mass spectrometry to elucidate neo-formed compounds derived from polyurethane adhesives used in champagne cork stoppers

  • Canellas Aguareles, E.
  • Vera Estacho, P.
  • Nerin de la Puerta, C.
  • Goshawk J.
  • Dreolin N.
Polyurethane adhesives are used to bond agglomerated cork and natural disk cork to produce cork stoppers that are used in champagne bottles. These adhesives are manufactured by reacting polyols with an excess of diisocyanates. Isocyanates are highly reactive compounds that have a propensity to form non-intentionally added substances (NIAS) in the end product. In this work, ion mobility-time of flight-mass spectrometry was used to elucidate such NIAS, through the comparison of accurate mass spectra with the fragmentation patterns of proposed candidates. Twelve neo-formed compounds, including amines, amides and urethanes, resulting from the reaction of isocyanates with acetic acid and ethanol used as food simulants, were identified. Additionally, markers from champagne vs. champagne after its exposure to the adhesive were investigated using the supervised multivariate analysis method of Orthogonal Projection to Latent Structures – Discriminant Analysis. Four neo-formed compounds, resulting from the reaction of diisocyanates with malic acid or tartaric acid contained in the champagne, were identified for the first time in this work. All of the compounds identified were subsequently quantified using ultra-high pressure liquid chromatography coupled to a triple quadrupole mass spectrometer. Limits of detection were below 5 µg/kg in the food simulants and below 30 µg/kg in champagne samples. Migration levels ranged from 70 to 721 µg/kg, with most of them exceeding the specific migration limit established for Cramer class III compound (90 µg/kg).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

MS-DIAL as efficient tool for the food safety assessment of volatile substances in disposable tableware

  • Jimenez Estremera, Carlos
  • Blazquez-Martín, Javier
  • Aznar, Margarita
  • Nerín, Cristina
  • Domeño, Celia
In this work, the food safety of disposable tableware with different compositions and uses has been studied. Migration tests of nine commercially disposable tableware made of polypropylene (PP), polystyrene (PS) and cardboard have been performed in four food simulants (ethanol 10 %, ethanol 95 %, acetic acid 3 % and Tenax ®) and analysed by direct-immersion solid-phase microextraction gas chromatography-mass spectrometry (DI-SPME-GC-MS). Mass Spectrometry Data Independent Analysis (MS-DIAL) software was used for identifying the volatile migrants and proved to be a huge step forward to perform non-target analysis in food contact material samples compared to traditional approaches. Our study detected a wide range of additives like plasticizers, lubricants, and inks and non-intentionally added substances (NIAS) like degradation products from polystyrene (oligomers) and polypropylene along with degradation products of antioxidants and UV stabilizers. More than 80 % of the compounds found were non listed substances (NLS) and their potential toxicological risk was estimated on the basis of Cramer’s rules.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Safety concerns of recycling postconsumer polyolefins for food contact uses: Regarding (semi-)volatile migrants untargetedly screened

  • Su, Q.Z.
  • Vera, P.
  • Nerín, C.
  • Lin, Q.B.
  • Zhong, H.N.
Plastic recycling is one of the important ways to mitigate plastic pollution. However, chemicals present in recycled plastics is one of the key qualities affecting their potential uses and deserves more attention. 475 migrants coming from 15 postconsumer recycled polyolefins were identified by direct immersion-solid-phase micro-extraction gas chromatography mass spectrometry (DI-SPME-GC-MS) and atmospheric pressure-gas chromatography-quadrupole-time of flight-mass spectrometry (APGC-QTOF-MS). About 60 % of them might not be of human risk because they were food additives/components or they are saturated hydrocarbons, fatty acyls, or prenol lipids. Most of them had molecular weight (MW) between 150 and 210 Da, though, high concern substances with high MW (e.g. octocrylene) implied that high MW surrogates are required to study the efficiency of recycling processes for polyolefins. The mean predicted octanol/water partition coefficient (XLogP) was about 6.5 and 3.5 for 95 % ethanol and 3 % acetic acid food simulants, respectively. Octocrylene, 1-tetradecene, 1-dodecene, dodecyl acrylate, 2, 4-di-tert-butylphenol, 1, 4-benzenedicarboxylic acid, diethyl ester, benzenamine, 2, 4-dichloro-, and diethyl phthalate were of high concern depending on the potential food contact use of the materials. The results presented are informative and can be of great help for recyclers and law makers to recycle polyolefins for safe food contact use.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The detection and elucidation of oligomers migrating from biodegradable multilayer teacups using liquid chromatography coupled to ion mobility time-of-flight mass spectrometry and gas chromatography-mass spectrometry

  • Canellas, Elena
  • Vera, Paula
  • Nerin, Cristina
  • Dreolin, Nicola
  • Goshawk, Jeff
Biodegradable materials are increasingly being used in manufacturing processes due to their environmental benefits. In this work, a study has been performed to assess the migration of compounds from biodegradable multilayer teacups to a tea solution. Liquid chromatography in conjunction with ion-mobility quadrupole time of-flight mass spectrometry has been used for the elucidation of non-volatile compounds. An orthogonal projection to latent structures-discriminant analysis has been carried out to compare the tea after migration against untreated tea used as blank. Headspace solid-phase microextraction coupled to gas chromatography-mass spectrometry has been optimised to analyse the migration of volatile compounds. Eight migrants were identified in the tea, six of which were non-intentionally added oligomers. The degree of migration for hot tea ranged from 0.05 and 4.68 mg/kg, exceeding the specific migration limit. Nevertheless, the migration to cold tea was an order of magnitude lower (between 0.003 and 0.56 mg/kg).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The use of ion mobility time-of-flight mass spectrometry to assess the migration of polyamide 6 and polyamide 66 oligomers from kitchenware utensils to food

  • Canellas, E.
  • Vera, P.
  • Song, X.C.
  • Nerin, C.
  • Goshawk, J.
  • Dreolin, N.
Oligomers, are, in general, unknown components of the polymer. These oligomers can migrate from the polymer into the food and become a non-intentionally added substance to the food. In this work, ion mobility time-of-flight mass spectrometry has been used to identify oligomers migrating from kitchenware. The structure elucidation of oligomers from polyamide 6 and polyamide 66 was achieved through the analysis of accurate m/z values of adducts and collision cross section values of precursor ions together with high-energy fragmentation patterns. Additionally, a method to extract oligomers from sunflower oil, cooked beans, soup and whole milk has been developed. Extraction recoveries ranged from 87 to 102% and limits of detection were from 0.03 to 0.11 mg/kg. It was observed that the migration from kitchenware to real food was below the specified migration limit of 5 mg/kg. However, this limit was exceeded for food simulants, which therefore overestimated the oligomer migration.