Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Generating colours through a novel approach based on spatial ALD and laser processing

  • Frechilla, A.
  • Sekkat, A.
  • Dibenedetto, M.
  • lo Presti, F.
  • Porta-Velilla, L.
  • Martínez, E.
  • de La Fuente, G.F.
  • Angurel, L.A.
  • Muñoz-Rojas, D.
This work studies the combination of direct femtosecond laser structuring of metal surfaces and Spatial Atomic Layer Deposition (SALD) of metal oxides as a novel approach to generate colours on different types of day-to-day metallic objects. In particular, a stainless-steel knife and an outdated 25 ct Dutch florin coin have been selected for the study. Our results show that it is possible both, to preserve the iridescence properties produced by laser processing and to tune the final metal surface colour by controlling the thickness of the ZnO coating. At the same time, this oxide coating could act as a protecting layer for the original material. We thus explore two different strategies to generate colour, namely, iridescence and interference, which can be even developed selectively. This novel methodology to colour metallic surfaces is a promising route to achieve cheap, scalable, and high-throughput processing methods and opens up a new avenue of possibilities and applications related to colour.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Spatially selective crystallization of ferroelectric Hf0.5Zr0.5O2 films induced by sub-nanosecond laser annealing

  • Frechilla, Alejandro
  • Napari, Mari
  • Strkalj, Nives
  • Barriuso, Eduardo
  • Niang, Kham
  • Hellenbrand, Markus
  • Strichovanec, Pavel
  • Simanjuntak, Firman Mangasa
  • Antorrena, Guillermo
  • Flewitt, Andrew
  • Magén, César
  • de la Fuente, Germán F.
  • MacManus-Driscoll, Judith L.
  • Angurel, Luis Alberto
  • Pardo, José Ángel
In this work we study the sub-nanosecond laser-induced crystallization of 10 nm-thick atomic layer deposited amorphous Hf0.5Zr0.5O2 (HZO) films in an air atmosphere. We used an infrared laser with 1064 nm wavelength and 800 ps pulses to anneal TiN/HZO/TiN capacitors by scanning an 80 μm-diameter spot along their top surface in a controlled way. The laser annealing process was optimised in terms of fluence to achieve the complete crystallization of HZO into a non-monoclinic polymorph, as demonstrated by X-ray diffraction and transmission electron microscopy. Piezoresponse force microscopy and polarization-field loops confirm that the optimal as-annealed HZO films are piezoelectric and ferroelectric from the first cycle on. Spatial selectivity was accomplished by scanning the laser on selected areas of the samples. Micro-diffraction experiments show that the transition between the crystallized and the amorphous region is abrupt within a distance of several hundred µm.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Significant reduction in processing time for Ca0.95Ce0.05MnO3 thermoelectric ceramics

  • Sotelo, A.
  • Amirkhizi, P.
  • Dura, O.J.
  • García, G.
  • Asensio, A.C.
  • Torres, M.A.
  • Madre, M.A.
  • Kovalevsky, A.
  • Rasekh, Sh.
Attrition-milling process has been applied to Ce-doped CaMnO3 precursors to obtain small grain-size powders. The use of Ce4+ as dopant instead a Rare Earth3+ has allowed decreasing by 50% the atomic proportion of dopant, to obtain equivalent charge carrier concentration, which is required for attaining promising properties for thermoelectric applications. An impressive decrease in thermal processing time was achieved, together with an increase in thermoelectric performances, when compared to classically prepared materials. XRD and SEM analysis have confirmed that the final material is nearly single phase. Moreover, grain sizes and density increase with the sintering duration. These microstructural differences are reflected in a significant decrease in electrical resistivity, when compared to the samples prepared from ball-milled precursors (used as reference), without drastically modifying the Seebeck coefficient values. On the other hand, despite of their high electrical conductivity, thermal conductivity is decreased for short time sintered materials, leading to the highest ZT values at 800 °C (∼0.27) in samples sintered for 1 h at 1310 °C. These values are among the best reported in the literature, but they have been obtained in very short time using a simple, and easily scalable process. The suggested approach presented in this work appears particularly promising for large-scale production of oxide-based thermoelectric modules for power generation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Grain Orientation, Angle of Incidence, and Beam Polarization Effects on Ultraviolet 300 ps-Laser-Induced Nanostructures on 316L Stainless Steel

  • Porta-Velilla, Luis
  • Martínez, Elena
  • Frechilla, Alejandro
  • Castro, Miguel
  • de la Fuente, Germán Francisco
  • Bonse, Jörn
  • Angurel, Luis Alberto
Laser‐induced periodic surface structures (LIPSS) represent a unique route for functionalizing materials through the fabrication of surface nanostructures. Commercial AISI 316L stainless steel (SS316L) surfaces are laser treated by ultraviolet 300 ps laser pulses in a laser line scanning (LLS) approach. Processing parameters are optimized (pulse energy of 2.08 µJ, pulse repetition frequency of 300 kHz, and suitable laser scan and sample displacement rates) for the generation of low spatial frequency LIPSS over a large 25 × 25 mm2 area. Different angles of incidence of the laser radiation (0°, 30°, and 45°) and different linear laser beam polarizations (s and p) produce a plethora of rippled surface morphologies at distinct grains. Scanning electron microscopy and 2D Fourier transforms, together with calculations of the optical energy deposited at the treated surfaces using Sipe's first‐principles electromagnetic scattering theory, are used to study and analyze in detail these surface morphologies. Combined with electron backscattering diffraction, analyses allow associating site‐selectively various laser‐induced‐surface morphologies with the underlying crystalline grain orientation. Resulting grain orientation maps reveal a strong impact of the grain crystallographic orientation on LIPSS formation and point toward possible strategies, like multi‐step processes, for improving the manufacturing of LIPSS and their areal coverage of polycrystalline technical materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Laser nanostructured metasurfaces in Nb superconducting thin films

  • Badía-Majós, Antonio
  • Martínez, Elena
  • Angurel, Luis A.
  • de la Fuente, Germán F.
  • Fourneau, Emile
  • Marinkovic, Stefan
  • Silhanek, Alejandro V.
Superconducting Nb thin films have been nanostructured by means of a femtosecond UV laser. Laser induced periodic surface structures (LIPSS) with lateral modulation of and depth smaller than amplitude ( from crest to trough) are obtained for optimized laser scanning conditions over the film surface, i.e. power, frequency, scanning speed and polarization. This provides a fast and scalable procedure of surface control at the nanoscale. In thin films, control over the kinetics of the LIPSS formation process has been crucial. Untreated and laser-patterned samples have been characterized by electron and atomic force microscopy as well as by local and global magnetometry. The superconducting properties reveal anisotropic behavior in accordance with the observed topography. The imprinted LIPSS define channels for anisotropic current flow and flux penetration. At low temperatures, magnetic flux avalanches are promoted by the increased critical current density, though flux tends to be channeled along the LIPSS. In general, directional flux penetration is observed, being a useful feature in fluxonic devices. Scalability allows us to pattern areas of the order of cm /min.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Properties and antibacterial activity of MnFe2O4 nanoparticles obtained by pulsed laser ablation in liquid

  • Özçelik, S.
  • Özçelik, B.
  • Arikan, B.
  • Kocamaz, S.
  • Amaveda, H.
  • Angurel, L.A.
  • de la Fuente, G.F.
In this study, MnFe2O4 nanoparticles (NPs) were fabricated via pulsed laser ablation in liquid. Chemical and structural composition, microstructure, magnetic and antibacterial properties were characterized. Spinel was found as the main crystalline phase, while Fe2O3 and Mn2O3 were observed as the major secondary phases, all identified by X-ray diffractometry (XRD). Observation by Transmission Electron Microscopy (TEM) indicated that most of the nanoparticles were spherical in shape and found in agglomerates, most likely because of their magnetic nature. Moreover, Fast Fourier Transform of selective area electron diffraction patterns pointed at the existence of crystalline particles. The coercive field (Hc) and saturation magnetization (Ms) values determined for these NPs were found to increase with decreasing temperature. Their antibacterial properties were evaluated using the viable bacteria counting technique (colony) for MnFe2O4 concentrations of 100 and 300 μg/mL with Bacillus subtilis, Salmonella typhimurium, Pseudomonas aeruginosa, Klebsiella pneumoniae and Escherichia coli strains.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of B-site doping on the thermoelectric performances of Ca0.97Y0.01 La0.01 Yb0.01Mn1-2xNbxMoxO3 thermoelectric ceramics

  • Amirkhizi, P.
  • Torres, M.A.
  • Dura, O.J.
  • Sotelo, A.
  • Madre, M.A.
  • Kovalevsky, A.
  • Rasekh, Sh.
A-, and B-site multiple-doped Ca0.97Y0.01La0.01Yb0.01Mn1–2xNbxMoxO3 was studied for improving its thermoelectric thermoelectric performance. Samples were prepared from planetary milled precursors and sintered at 1310ºC for 12 h. XRD showed that sintered samples are nearly single phase, with small amounts of CaMn2O4. SEM analysis revealed that grain size decreases with Nb and Mo content, leading to lowered electrical resistivity, reaching 6.1 mΩ cm at 800ºC in x = 0.03 samples, 60% lower than that of pristine samples. The highest Seebeck coefficient for doped samples has been obtained for x = 0.005, 210μV/K at 800ºC. A high power factor (0.46 mW/K2 m at 800ºC) has been reached for x = 0.01 samples. However, thermal conductivity did not significantly vary with composition, leading to ZT∼0.27 at 800ºC for x = 0.005 samples, among the best reported in the literature. These results suggest that multi-doping approach opens new paths for integrating calcium manganite-based materials in thermoelectric modules for power generation at high temperatures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of laser wavelength on the thermoelectric properties of Bi1.6Pb0.4Sr2Co2O8 textured ceramics processed by LFZ

  • Amirkhizi, P.
  • Madre, M.A.
  • Dura, O.J.
  • Torres, M.A.
  • Sotelo, A.
  • Kovalevsky, A.
  • Rasekh, Sh.
Bi1.6Pb0.4Sr2Co2O8 samples have been textured by the Laser Floating Zone (LFZ) process using Nd:YAG, and CO2 laser radiation. Using different wavelengths resulted in significant structural and microstructural modifications. Powder XRD patterns showed that the thermoelectric phase is the major one in both cases. Microstructural studies revealed that all samples presented the same phases but with much lower content of secondary ones in those processed with the CO2 laser. Electrical resistivity showed different behavior for the two types of samples, being in general, lower for the CO2 grown rods. Seebeck coefficient is lower for the CO2 grown samples up to 300 °C, and higher in the high-temperature range, reaching 240 μV/K at 650 °C, which is one of the highest values obtained so far in these compounds. Moreover, thermal conductivity at 600 °C for these samples (0.93 W/K m) is among the lowest reported in the literature. As a consequence, ZT values at 600 °C reached 0.42 in CO2 textured materials, about two times higher than the obtained in Nd:YAG ones. This value is among the highest reported so far in the literature, and is comparable to the performance attained for the same composition containing nanoparticles addition. All these properties, combined with the fact that the processed materials can be directly integrated into thermoelectric modules, render them highly attractive for industrial production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Laser engineered architectures for magnetic flux manipulation on superconducting Nb thin films

  • Martínez, Elena
  • Lejeune, Nicolas
  • Frechilla, Javier
  • Porta-Velilla, Luis
  • Fourneau, Emile
  • Angurel, Luis A.
  • de la Fuente, Germán F.
  • Bonse, Jörn
  • Silhanek, Alejandro V.
  • Badía-Majós, Antonio
Custom shaped magnetic flux guiding channels have been fabricated on superconducting Nb thin films by laser nanopatterning of their surface. Preferential pathways are defined by suitable combination of imprinted anisotropic pinning domains through laser-induced periodic surface structures (LIPSS). Generated by the selective energy deposition of femtosecond UV laser pulses, quasi-parallel ripple structures are formed under optimized irradiation conditions. On average, each domain is formed by grooves with a lateral period of 260–270 nm and a depth about 80 nm. By combination of scanning and transmission electron microscopy, magneto-optical imaging, and conductive atomic force microscopy techniques, we conclude that the boundaries of the LIPSS-covered domains play a prominent role in the magnetic flux diversion process within the film. This is confirmed by dedicated modeling of the flux dynamics, combined with the inversion of the magneto-optical signal. The created metasurfaces enable control of the flux penetration process at the microscale.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fabrication and thermoelectric properties of multilayer textured Sr-doped Ca3Co4O9/Ag laminar composites

  • Amirkhizi, P.
  • Madre, M.A.
  • Wang, H.C.
  • Li, Z.H.
  • Torres, M.A.
  • Sotelo, A.
  • Hedayati, M.
  • Kovalevsky, A.V.
  • Rasekh, Sh.
This work presents a comparative analysis of pure and Ag-intercalated Ca3Co4O9 multilayer thermoelectric materials prepared through the hot-uniaxial pressing technique. Samples were prepared by attrition milling and hot-pressed at 900 °C and 55 MPa for 1 h. They were mirror polished, and some of them were stacked with and without intermediate Ag foil and hot-pressed again at 900 °C and 52 MPa for 1 h. Out-of-plane XRD showed that samples are nearly single-phase, and the grains are well oriented with their ab-plane perpendicular to the pressure direction. Microstructural studies confirmed perfect welding in the multilayer samples accompanied by the formation of a very thin layer containing larger grains and notable Ag diffusion close to the Ca3Co4O9/Ag interface. Three-point bending stresses have been increased in Ag-containing samples, while microhardness has been raised in all samples hot-pressed twice. Thermoelectric measurements showed a decrease of thermal gradient along the Ag-containing sample, together with a drastic decrease of electrical resistivity when compared to the Ag-free ones. However, the Ag-layers have promoted a drastic decrease in the Seebeck coefficient, reflected in a notable reduction of the power factor of Ca3Co4O9/Ag multilayer composites. Nevertheless, these results show that it is possible to use these materials to reduce Joule heating and increasing the compatibility with the welding compounds when building thermoelectric modules. Moreover, they open a new research line searching for larger S compounds to be intercalated with Ag foils.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Direct Laser Synthesis of Fe<sub>2</sub>O<sub>3</sub> Modified TiO<sub>2</sub>

  • Lennikov, V. V.
  • Gómez-Herrero, A.
  • Angurel, L. A.
  • de la Fuente, G. F.
  • Otero-Díaz, L. C.
A very fast, selective CO2 laser line scan direct synthesis method is presented and has been applied here to study phase and defect formation within an irradiated mixture of powdered oxides, as a proof‐of‐principle. A nominal composition interval of 0<x<0.03 was conveniently chosen for the TiO2+xFe2O3 system herein reported. X‐ray diffraction analyses were used to determine the main crystalline phase composition. Thus, for 3 % mol. Fe2O3, pseudobrookite crystals were found to coexist with rutile‐type MO2‐δ (M=Ti, Fe) with extended defects. These are composed mainly of (121)r and (132)r crystallographic shear planes (CSP‘s), where r subindex refers to the rutile subcell. For samples with a lower Fe2O3 content (2, 1, 0.5 % mol) only iron‐doped rutile phases were observed, with complex microstructure arising from the presence of multi‐twinned (011)r and (110)r crystals and isolated and/or ordered CSP‘s at short length scale. The diverse microstructures observed in the CO2 laser produced samples correlate with the conditions imposed during the laser treatment, which include intrinsically high solidification rates and steep temperature gradients.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhancing thermoelectric performance of CaMnO3 through a Y- and La- dual-doping strategy

  • Amirkhizi, P.
  • Madre, M.A.
  • Dura, O.J.
  • Torres, M.A.
  • Sotelo, A.
  • Kovalevsky, A.V.
  • Rasekh, Sh.
A classical ceramic route has been used in this work to prepare Y and La co-doped CaMnO3 thermoelectric compound seeking to improve its thermoelectric properties. The study highlights significant improvements in electrical and thermal transport properties achieved with minimal doping levels and a cost-effective synthesis process. The co-doping strategy effectively reduced electrical resistivity (reaching 10.8 mΩ cm at 800 °C for 0.03 (Y, La)-doped samples) while maintaining a relatively high Seebeck coefficient (300 μV/K at 800 °C for 0.01 (Y, La)-doped samples). Moreover, the thermal conductivity was minimized (1.65 W/(K m) at 800 °C for 0.03 (Y, La)-doped samples), leading to outstanding thermoelectric performance, with 0.47 mW/(K2m) power factor, and 0.25 ZT values at 800 °C (for 0.01 (Y, La)-doped samples. These results are among the best values reported so far for this family of compounds, underscoring the potential of this material for high-temperature thermoelectric applications and the efficiency of the classical ceramic approach with reduced dopant usage.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhancing electrical properties in CaMnO<sub>3</sub>-based ceramics: The impact of single doping with different elements

  • Amirkhizi, P.
  • Madre, M. A.
  • Constantinescu, G.
  • Torres, M. A.
  • Sotelo, A.
  • Kovalevsky, A. V.
  • Rasekh, Sh.
This study explores the effect of single doping with different rare earth elements (Y, La, and Yb) on the structural, morphological and electrical properties of CaMnO3 bulk ceramics, aiming to improve their thermoelectric performance. Ca(1‐x)RxMnO3 (R = Y, La, Yb; x = 0, 0.05, 0.10) samples were synthesized via a solid‐state reaction. XRD analysis confirmed the thermoelectric CaMnO3 phase as the major one, with orthorhombic perovskite structure. Small amounts of secondary phases (CaMn2O4 and Mn2O3) were also detected in some doped samples. The addition of dopants influenced the unit cell parameters, producing a shift to lower 2θ angles, confirming their incorporation into the ceramic structure. SEM micrographs revealed a significant reduction in grain size upon doping. Electrical resistivity measurements showed a metallic behavior for all doped samples. The Y‐doped samples exhibited the highest resistivity values while the Yb‐doped samples showed the lowest values (6.8 mΩ cm for the 0.10 doped one), which are among the lowest found in literature for this compound. The Seebeck coefficient values show minor changes for 0.05 doped samples when they decreased with increasing concentration of dopant. Consequently, the highest values were observed for 0.05‐doped sample (−215 µV/K), independently of the dopant. This value is much higher than the ones typically reported in the literature. The highest value of the power factor was calculated for the 0.05 Yb doped sample, reaching approximately 0.56 mW/K2·m at 800°C. This value is higher than the best presented in the literature for this compound, to the best of our knowledge, and suggests that Yb3+ doping greatly enhances the high‐temperature thermoelectric performance of bulk CaMnO3 ceramics, making it a promising dopant for high‐efficiency thermoelectric materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fabrication and testing of ceramic thermoelectric multi-leg module for high-temperature energy conversion

  • Amirkhizi, P.
  • Hedayati, M.
  • Madre, M.A.
  • Dura, O.J.
  • Torres, M.A.
  • Sotelo, A.
  • Kovalevsky, A.V.
  • Rasekh, Sh.
This study investigates the fabrication and performance of ceramic-based thermoelectric modules for high-temperature energy conversion, based on Ca2.93Sr0.07Co4O9 and Ca0.91Y0.03La0.03Yb0.03MnO3 p- and n-type materials. The p-type materials were prepared through attrition milling and classical sintering, while ball milling and hot uniaxial pressing were used for the n-type legs. The power factor reached 0.62 mW/(K2m) for the p-type and 0.33 mW/(K2m) for the n-type materials at 800 °C, being comparable to some of the best-reported values in literature. The lower thermal conductivity of n-type material (1.24 W/K/m) compared to the p-type material (1.56 W/K/m) resulted in similar ZT values for n-type (0.29) and p-type (0.43). The thermal expansion behaviour of the materials was also evaluated, demonstrating good thermal compatibility between the p- and n-type legs. The module's performance was tested at hot-side temperatures up to 900 °C, yielding a power density of 34 W/m2. Moreover, the module demonstrated an energy conversion efficiency of 0.8 % (actual) and 6 % (theoretical), thereby underscoring the practical potential of these materials. Additionally, the module exhibited excellent long-term thermal stability, maintaining its performance after 2000 h of exposure at 900 °C and after undergoing 100 thermal cycles, demonstrating its suitability for high-temperature energy recovery applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Wavelength-induced modifications of thermoelectric properties of laser-textured Bi2Sr2-xBaxCo2O8 ceramics for sustainable energy generation

  • Özkurt, Pinar
  • Madre, M.A.
  • Özkurt, Berdan
  • Torres, M.A.
  • Sotelo, A.
  • Rasekh, Sh.
Ba-doped Bi2Sr2-xBaxCo2O8 samples have been directionally grown using the Laser Floating Zone technique using two different lasers, leading to significant differences between the samples. Powder XRD patterns revealed that the major phase in all samples is the thermoelectric one, without notable differences with the type of laser. On the other hand, microstructure studies showed significant differences between Nd:YAG and CO2-grown samples. Use of CO2 laser promoted a reduction of secondary phases content and a higher grain alignment. Furthermore, Ba-doping further decreases the secondary phases content and increases grain alignment. The electrical resistivity was affected by the different microstructures, being lower for the CO2-grown samples, reaching the lowest values at 650 °C in 0.125Ba-doped samples, 12.8 mΩ cm, which are among the best reported in the literature. However, S is maintained practically unchanged independently of the laser and composition. As a consequence, PF values mainly depend on the electrical resistivity and, consequently, the highest values at 650 °C, 0.22 mW/K2m, have been achieved in 0.125Ba samples textured with CO2 laser. These values are around the best ones presented in the literature for this material. Additionally these textured materials possess the advantage of avoiding the typical machining processes which are necessary in bulk materials for their integration into thermoelectric modules. These characteristics may enhance the interest on these materials in order to be used in practical devices to help their use to produce affordable, reliable and sustainable energy for all mankind.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhanced thermoelectric properties in Bi2Sr2-xBaxCo2Oy via doping and texturing for integration in more efficient thermoelectric generators

  • Özkurt, Pinar
  • Madre, M.A.
  • Özkurt, Berdan
  • Torres, M.A.
  • Sotelo, A.
Bi2Sr2-xBaxCo2Oy (0 ≤ x ≤ 0.15) thermoelectric samples have been sintered, and textured through the laser floating zone process using a Nd:YAG laser. Powder XRD studies showed that the thermoelectric phase is the major one in all cases, with higher amount of secondary phases in the textured ones due to their incongruent melting. Microstructural characterization revealed a drastic microstructural modification in the textured samples, when compared to the sintered ones, producing much larger and well oriented grains along the growth direction. These characteristics led to lower electrical resistivity in textured samples, reaching the minimum at 650 °C (14.8 mΩ cm) in 0.125Ba-doped samples, which is lower than those typically reported in this system. On the other hand, no significant variation in Seebeck coefficient has been found between the samples. This behaviour is associated to the isovalent doping which does not modify the charge carrier concentration in the material, and the highest values at 650 °C (166 μV/K) are in the order of the reported in the literature. As a consequence, power factor values are mainly driven by the electrical resistivity values, leading to the highest values at 650 °C in 0.125Ba-doped textured samples (0.19 mW/K2m) due to their lowest resistivity. These values are higher than the reported for textured materials and in the order of the best reported for this compound in bulk form. All these properties, together with the possibility of the direct integration of these compounds in thermoelectric modules, make them very attractive for practical applications ensuring access to affordable, reliable, and sustainable energy for all.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Processing and optimization of laser-activated Cu and Ni inks for ceramic tile inkjet printing

  • Lahlahi-Attalhaoui, A.
  • Porcar, S.
  • Cuadra, J.G.
  • Toca, S.
  • Fraga, D.
  • Jordán, M.D.
  • Cervera, I.
  • Fuente, G.F. de la
  • Carda, J.B.
This study presents a technique for the metallization of ceramic surfaces under ambient conditions, using metallic inks activated through direct laser writing. This process represents a significant advancement in surface processing technology in the ceramic tile industry. The method involves crystallizing metallic coatings directly onto the ceramic surface, using a Cu or Ni polymer coordination complex. A uniform and vitrified metallic coating is formed on the ceramic when exposed to pulsed laser irradiation at 1064 nm. X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM) analysis confirm the formation of face-centered cubic phases of Cu and Ni. Scanning Electron Microscopy (SEM) analysis reveals spherical grains embedded in the matrix with diameters smaller than 150 nm. TEM analysis confirms the presence of crystals with an average size smaller than 20 nm, which induce Surface Plasmon Resonance (SPR) effects. The absorption effect observed at 450 and 350 nm, indicated by UV–Vis Diffuse Reflectance Spectroscopy, is attributed to the surface plasmon resonance effects of Cu and Ni particles on the glass coating. X-ray Photoelectron Spectroscopy (XPS) analysis confirms the laser-induced redox transformation of Cu(II) and Ni(II) precursor complexes into reduced Cu(0) and Ni(0) nanoparticles, while also confirming the formation of a thin oxide coating of CuO and NiO on the surface. This approach holds great potential for digital ceramic decoration due to the scalable nature of this technique.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultrafast development of blue pigment for in situ laser digital coloration in the ceramic industry

  • Lahlahi-Attalhaoui, Abderrahim
  • González Cuadra, Jaime
  • Porcar García, Samuel
  • Toca Valero, Santiago Luis
  • Fraga Chiva, Diego
  • Fuente, Germán F. de la
  • Carda, Juan Bautista
This study presents a fast and simple method for digital ceramic coloration using inkjet printing, eliminating the need for traditional precalcined pigments. This innovative approach represents a breakthrough in ceramic decoration technology, and introduces a previously unexplored methodology. In this work, CoAl₂O₄ spinel, a pigment commonly used in industrial contexts, is synthesized through laser zone melting (LZM) by applying pulsed laser radiation at 1064 nm. A standardized methodology to optimize pigment quality is developed, based on laser parameters such as pulse width, frequency, speed, power, and line spacing. Scanning electron microscopy (SEM) is used to determine the optimal laser conditions for obtaining a continuous, defect‐free coating, showing that the embedded particles on the surface exhibit a nearly spherical morphology with diameters below 100 nm. The sample with the highest surface quality is further analyzed structurally and optically. X‐ray diffraction (XRD) confirms the presence of a pure spinel phase without secondary phases, along with a vitreous phase due to pigment embedding. Fourier‐transform infrared spectroscopy (FTIR) and Raman spectroscopy reveal the characteristic vibrational bands of a normal spinel structure. The intense blue color is confirmed by strong absorption at 560 nm in ultraviolet–visible (UV–Vis) spectroscopy, as well as b* and Δb* values of 29 and 1.58, respectively, compared to the traditional pigment. This synthesis approach significantly enhances digital ceramic coloration compared to other methods evaluated in this study, offering a scalable, flexible, and more efficient alternative suitable for industrial‐scale production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Insights into the Structural, Microstructural and Thermoelectric Properties of Ce/Cr co-doped CaMnO3 manganites

  • Korkmaz, L.
  • Özçelik, C.
  • Gürsul, M.
  • Torres, M. A.
  • Madre, M. A.
  • Sotelo, A.
  • Özçelik, B.
This study investigates the structural, microstructural, and thermoelectric properties of Cr-substituted Ca0.99Ce0.01Mn1-xCrxO3 materials synthesized via solid-state reaction method. X-ray diffraction (XRD) analysis confirms the single-phase orthorhombic structure (Pnma space group) for all compositions, with successful incorporation of Cr into the crystal structure. A slight decrease in lattice parameters is observed, attributed to the smaller ionic radius of Cr3+ compared to Mn3+. Field Emission scanning electron microscope (FESEM) reveals that Cr doping inhibits grain growth and induces crack formation, which significantly impacts electrical resistivity. The charge transport mechanism is well-described by Mott’s adiabatic small polaron model, with activation energy increasing with Cr doping. The Seebeck coefficient remains negative across all temperatures, indicating n-type conduction, and the highest power factor (∼0.35 mW/K2m) is achieved for the 0.03Cr-doped sample at 800 °C. These results highlight the potential of Cr-doped CaMnO3 as a cost-effective and scalable thermoelectric material, with performance comparable to that reported using more complex synthesis methods.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Critical current density in advanced superconductors

  • Ruiz, H.S.
  • Hänisch, J.
  • Polichetti, M.
  • Galluzzi, A.
  • Gozzelino, L.
  • Torsello, D.
  • Miloševic-Govedarovic, S.
  • Grbovic-Novakovic, J.
  • Dobrovolskiy, O.V.
  • Lang, W.
  • Grimaldi, G.
  • Crisan, A.
  • Badica, P.
  • Ionescu, A.M.
  • Cayado, P.
  • Willa, R.
  • Barbiellini, B.
  • Eley, S.
  • Badía Majós, A.
This review paper delves into the concept of critical current density in high-temperature superconductors (HTS) across macroscopic, mesoscopic, and microscopic perspectives. Through this exploration, a comprehensive range of connections is unveiled aiming to foster advancements in the physics, materials science, and the engineering of applied superconductors. Beginning with the macroscopic interpretation of as a central material law, the review traces its development from C.P. Bean’s foundational work to modern extensions. Mesoscopic challenges in understanding vortex dynamics and their coherence with thermodynamic anisotropy regimes are addressed, underscoring the importance of understanding the limitations and corrections implicit in the macroscopic measurement of , linked with mesoscopic phenomena such as irradiation effects, defect manipulation, and vortex interactions. The transition to supercritical current densities is also discussed, detailing the superconductor behavior beyond critical thresholds with a focus on flux-flow instability regimes relevant to fault current limiters and fusion energy magnets. Enhancing through tailored material microstructures, engineered pinning centers, grain boundary manipulation, and controlled doping is explored, along with radiation techniques and their impact on large-scale energy systems. Emphasizing the critical role of , this review focuses on its physical optimization and engineering manipulation, highlighting its significance across diverse sectors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Laser annealing of transparent ZnO thin films: a route to improve electrical conductivity and oxygen sensing capabilities

  • Frechilla, A.
  • Frechilla, J.
  • Angurel, L. A.
  • Toldrá-Reig, F.
  • Balas, F.
  • Martínez, E.
  • de La Fuente, G. F.
  • Muñoz-Rojas, D.
The chemical deposition of high-performance zinc oxide (ZnO) thin films is challenging, thus significant efforts have been devoted during the past decades to develop cost-effective, scalable fabrication methods in gas phase. This work demonstrates how ultra-short-pulse laser beam scanning (LBS) can be used to modulate electrical conductivity in ZnO thin films deposited on soda–lime glass by spatial atomic layer deposition (SALD), a high-throughput, low-temperature deposition technique suitable for large-area applications. By systematically optimizing laser parameters, including pulse energy and hatching distance, significant improvements in the electrical performance of 90 nm-thick ZnO films were achieved. The optimization of the laser annealing parameters – 0.21 μJ per pulse energy and a 1 μm hatching distance—yielded ZnO films with an electrical resistivity of (9 ± 2) × 10−2 Ω cm, 3 orders of magnitude lower than as-deposited films. This result suggests that laser post-deposition processing can play an important role in tailoring the properties of ZnO thin films. Excessive laser intensity can compromise structural integrity of the films, however, degrading their electrical transport properties. Notably, the electrical resistance of laser-annealed ZnO films exhibited high sensitivity to oxygen concentration in the surrounding atmosphere, suggesting exciting prospects for application in devices based on transparent oxygen sensors. This study thus positions ultra-short pulsed laser annealing as a versatile post-deposition method for fine-tuning the properties of ZnO thin films, enabling their use in advanced optoelectronic and gas-sensing technologies, particularly on temperature-sensitive substrates.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Tailoring Ca0.99Ce0.01MnO3 properties using Mo doping and its integration in a power generation thermoelectric module

  • Korkmaz, L.
  • Özçelik, C.
  • Gürsul, M.
  • Torres, M.A.
  • Madre, M.A.
  • Sotelo, A.
  • Özçelik, B.
In the present study, we examined both the crystal structure and thermoelectric behavior of Ca0.99Ce0.01Mn1-xMoxO3 compositions, with Mo concentrations set at x = 0, 0.01, 0.03, 0.05, and 0.10. From XRD experiment, it is observed that most of the peaks can be indexed in a Pnma space group. Furthermore, Mo has effectively substituted Mn into the unit cell revealed by the shift of the diffraction peaks towards lower angles. SEM images showed a grain refinement with the increase in Mo doping, suggesting that it acts as grain growth inhibitor. Moreover, a decrease of porosity is observed when the amount of dopant is raised up to 0.05, increasing for higher Mo content. EDS analysis conducted on various regions of the samples shows that the grain compositions closely match the nominal values. Resistivity data show that the undoped sample exhibits both metallic-like and semiconducting-like behavior, whereas Mo doping induces metallic-like behavior throughout the entire temperature range. The lowest resistivity at 800 °C (∼ 6.5 mΩ cm) was recorded for the 0.10 Mo-substituted sample, which is comparable to the values found in the 0.03 and 0.05 Mo-doped samples, and significantly lower than that of the undoped sample. The evolution of the Seebeck coefficient as a function of composition and temperature demonstrated that all samples exhibit negative S values within the measured range of temperatures. The highest |S| values at 800 °C were measured in the Mo-free samples (213 μV/K), very close to that of the 0.01Mo-doped samples (207 μV/K). Highest PF measured at 800 °C were obtained in 0.01Mo-doped samples (∼ 0.36 mW/K2m), which are between 13 and 30 % higher than those obtained in 0.0, 0.03, and 0.05Mo-doped samples. Finally, a power generation thermoelectric module with 17 p-n pairs, and 50 × 50 mm2 surface, has been successfully prepared using 0.01Mo doped samples and Ca2.93Sr0.07Co4O9, which has produced 0.045 W maximum power at 900 °C hot-side temperature, under 358 °C internal ΔT. Taking into account the module surface (2500 mm2) and the maximum power generated (45 mW), a high power density of 18 W/m2 has been obtained.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Magnetization Losses and Non-Reduced 3D Modeling of Hybrid CORC-TSTC Composite Conductors

  • Al-Ssalih, Hasan N. H.
  • Clegg, Matthew
  • Badía-Majós, Antonio
  • Ruiz, Harold S.
The Conductor on Round Core (CORC) and Twisted Stacked-Tape Conductor (TSTC) are among the most promising architectures for high-temperature superconducting (HTS) cables due to their high current-carrying capabilities, essential for future fusion and high voltage -high current- power applications. While CORC designs offer mechanical robustness, their larger cross-sections can lead to spatial inefficiencies, whereas TSTC cables are more compact but limited in transport current. To bridge these trade-offs, a CORC–TSTC hybrid cable has been recently proposed by Korean researchers, though its electromagnetic performance remains largely unverified. In this work, we present a comprehensive three-dimensional electromagnetic study to validate the experimentally measured AC losses of such hybrid cables, using SuNAM Co. Ltd. GdBCO HTS tapes. Our model captures the full current dynamics on the surface and within the superconducting layers, overcoming the limitations of reduced-order gauge (2D) methods. The hybrid cable configurations considered consist of a six-tape CORC outer layer enclosing a TSTC core with one to four stacked tapes. The model incorporates magneto-angular anisotropy in the critical current density, informed by experimental data, to ensure accurate benchmarking. To contextualize the hybrid design’s performance, we also simulate two reference geometries: a single-layer and a double-layer CORC cable, as well as a ten-tape TSTC conductor. Results show that the hybrid configuration offers a compelling balance, combining low AC losses with compact geometry and structural flexibility.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of B-site doping on the thermoelectric performances of Ca0.97Y0.01 La0.01 Yb0.01Mn1-2xNbxMoxO3 thermoelectric ceramics

  • Amirkhizi, P.
  • Torres, M.A.
  • Dura, O.J.
  • Sotelo, A.
  • Madre, M.A.
  • Kovalevsky, A.
  • Rasekh, Sh.
A-, and B-site multiple-doped Ca0.97Y0.01La0.01Yb0.01Mn1–2xNbxMoxO3 was studied for improving its thermoelectric thermoelectric performance. Samples were prepared from planetary milled precursors and sintered at 1310ºC for 12 h. XRD showed that sintered samples are nearly single phase, with small amounts of CaMn2O4. SEM analysis revealed that grain size decreases with Nb and Mo content, leading to lowered electrical resistivity, reaching 6.1 mΩ cm at 800ºC in x = 0.03 samples, 60% lower than that of pristine samples. The highest Seebeck coefficient for doped samples has been obtained for x = 0.005, 210μV/K at 800ºC. A high power factor (0.46 mW/K2 m at 800ºC) has been reached for x = 0.01 samples. However, thermal conductivity did not significantly vary with composition, leading to ZT∼0.27 at 800ºC for x = 0.005 samples, among the best reported in the literature. These results suggest that multi-doping approach opens new paths for integrating calcium manganite-based materials in thermoelectric modules for power generation at high temperatures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhancing electrical properties in CaMnO3-based ceramics: The impact of single doping with different elements

  • Amirkhizi, P.
  • Madre, M.A.
  • Constantinescu, G.
  • Torres, M.A.
  • Sotelo, A.
  • Kovalevsky, A.V.
  • Rasekh, Sh.
This study explores the effect of single doping with different rare earth elements (Y, La, and Yb) on the structural, morphological and electrical properties of CaMnO3 bulk ceramics, aiming to improve their thermoelectric performance. Ca(1-x)RxMnO3 (R = Y, La, Yb; x = 0, 0.05, 0.10) samples were synthesized via a solid-state reaction. XRD analysis confirmed the thermoelectric CaMnO3 phase as the major one, with orthorhombic perovskite structure. Small amounts of secondary phases (CaMn2O4 and Mn2O3) were also detected in some doped samples. The addition of dopants influenced the unit cell parameters, producing a shift to lower 2θ angles, confirming their incorporation into the ceramic structure. SEM micrographs revealed a significant reduction in grain size upon doping. Electrical resistivity measurements showed a metallic behavior for all doped samples. The Y-doped samples exhibited the highest resistivity values while the Yb-doped samples showed the lowest values (6.8 mΩ cm for the 0.10 doped one), which are among the lowest found in literature for this compound. The Seebeck coefficient values show minor changes for 0.05 doped samples when they decreased with increasing concentration of dopant. Consequently, the highest values were observed for 0.05-doped sample (−215 µV/K), independently of the dopant. This value is much higher than the ones typically reported in the literature. The highest value of the power factor was calculated for the 0.05 Yb doped sample, reaching approximately 0.56 mW/K2·m at 800°C. This value is higher than the best presented in the literature for this compound, to the best of our knowledge, and suggests that Yb3+ doping greatly enhances the high-temperature thermoelectric performance of bulk CaMnO3 ceramics, making it a promising dopant for high-efficiency thermoelectric materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of near-edge Laser-Induced Periodic Surface Structures (LIPSS) on the electrical properties of fs-laser-machined ITO microcircuits

  • Frechilla, A.
  • Martínez, E.
  • Moral, J. del
  • López-Santos, C.
  • Frechilla, J.
  • Nuñez-Gálvez, F.
  • López-Flores, V.
  • de la Fuente, G.F.
  • Hülagü, D.
  • Bonse, J.
  • González-Elipe, A.R.
  • Borrás, A.
  • Angurel, L.A.
Scalable, cost-effective methods for processing transparent electrodes at the microscale are pivotal to advancing in electrochemistry, optoelectronics, microfluidics, and energy harvesting. In these fields, the precise fabrication of micrometric circuits and patterns plays a critical role in determining device performance, material compatibility, and integration with added-value substrates. In this context, Laser Subtractive Manufacturing stands out as a suitable microfabrication technique for its adaptability to diverse materials and complex configurations, as well as its straightforward scalability, affordability, and eco-friendly nature. However, a challenge in micromachining metals and metal oxides is the inherent formation of Laser-Induced Periodic Surface Structures (LIPSS), which can significantly impair electrical conductivity, particularly when circuit dimensions fall within the micrometer range. Herein, we investigate the micromachining of electrical microcircuits using ultrashort pulse laser systems applied to transparent indium tin oxide (ITO) thin films. We analyze the formation of LIPSS at the edges of the micromachined regions associated with the Gaussian distribution of the energy within the laser spot, and the impact of these structures on the electrical properties of the circuits. Thus, we systematically evaluate the influence of LIPSS orientation and periodicity by fabricating various circuit patterns using femtosecond lasers at green (515 nm) and ultraviolet (UV) (343 nm) wavelengths. A correlation between electrical resistivity measurements and microstructure analysis, as determined by field emission scanning electron and transmission electron microscopy, reveals distinct effects of the formed nanostructures depending on the laser source and its polarization. For the green wavelength, the edge side regions where LIPSS are oriented perpendicular to the ITO track exhibit a resistance higher by a factor just above two compared to those where LIPSS are parallel. Additionally, UV laser processing results in a pronounced reduction of ITO thickness at the boundary between the LIPSS region and the substrate. The mechanisms for the formation of LIPSS with both wavelengths are also discussed. Furthermore, we have determined that in narrow conductive tracks with a width ranging from 6 to 8 µm, the impact of LIPSS is particularly significant because the LIPSS structured region occupies a dominant fraction of the total width.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Anisotropy by design in superconducting Nb thin films via ultrashort-pulse laser irradiation

  • Frechilla, Javier
  • Lejeune, Nicolas
  • Martínez, Elena
  • Fourneau, Emile
  • Frechilla, Alejandro
  • Martín, Sergio
  • Cadorim, Leonardo R.
  • Angurel, Luis A.
  • de la Fuente, Germán F.
  • Silhanek, Alejandro V.
  • Miloševic, Milorad V.
  • Badía-Majós, Antonio
The ability to fabricate anisotropic superconducting layers & agrave; la carte is desired in technologies such as fluxon screening or removal in field-resilient devices, flux lensing in ultra-sensitive sensors, or in templates for imprinting magnetic structures in hybrid magnetic/superconducting multilayers. In this work, laser processing is qualified as an enabling technology in the controllable fabrication of superconducting metasurfaces. Niobium thin films exposed to femtosecond ultraviolet laser pulses exhibit significant changes in their superconducting properties, directly connected with the observed surface topography, crystallite geometry, and lattice parameter modifications. On the mesoscopic scale, quasi-parallel periodic ripple structures (about 260 nm of spatial period) gradually form on the film surface by progressively increasing the laser energy per pulse, Ep. This gives way to a stepwise increase of the critical current anisotropy and magnetic flux channeling effects along the ripples. As demonstrated in our resistive and inductive measurements, these superstructures determine the electromagnetic response of the superconducting material. Time-dependent Ginzburg-Landau simulations corroborate the topographical origin of the customized anisotropy. Pulsed laser processing is promoted as a flexible, one-step, and scalable lithography-free technique for versatile surface functionalization in microelectronic superconducting technology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Positive influence of femtosecond pulsed laser machining on levitation forces of top-seeded melt-grown textured YBCO

  • Al-Mokdad, F.
  • Guner, S.B.
  • Rivera-Sahún, J.
  • Badía-Majós, A.
  • Angurel, L.A.
  • de la Fuente Leis, G.F.
  • Martínez, E.
  • Porta-Velilla, L.
  • Gencer, A.
High-temperature textured YBCO superconductors are considered relevant for applications requiring strong flux pinning, and hence enhanced critical current density and resilient levitation forces, such as maglev systems, magnetic resonance imaging and nuclear magnetic resonance magnets. Improving the performance of YBCO for such applications is commonly achieved by enhancing the flux pinning properties through various mechanisms. In addition, either related to the sample fabrication process or demanded by the final operation conditions, machining these highly brittle samples would be desirable for a number of applications and is a challenging demand. This work reports on the use of ultrashort-pulsed laser irradiation to machine holes into top-seeded melt-growth YBCO samples and how this processing affects their microstructure and superconducting behavior. The x-ray diffraction (XRD) and scanning electron microscopy results demonstrate that ultrashort-pulsed laser machining can create well-defined holes with diminishing microstructural damage. The superconducting properties of the laser-machined samples are essentially preserved, even compatible with the enhancement in the critical current density and levitation force properties. These findings demonstrate the potential of ultrashort-pulsed lasers as a viable tool for machining textured YBCO products and enhancing their performance without degrading their functional properties. This method paves the way towards the generation of artificial defects, machining and shaping of high Tc superconductor ceramics into precisely well-defined complex geometries relevant for power applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Structural, thermoelectric and magnetic properties of La-doped CaMnO3: Role of electron doping and mixed-valence effects

  • Atilla, B.
  • Özçelik, B.
  • Gürsul, M.
  • Torres, M.A.
  • Madre, M.A.
  • Sotelo, A.
The structural, microstructural, electrical, thermoelectric, and magnetic properties of La-doped Ca1-xLaxMnO3 samples with x = 0.00, 0.025, 0.05, 0.075, 0.10, 0.15, and 0.20 were systematically investigated to clarify the effect of A-site electron doping on n-type oxide thermoelectric performance. X-ray diffraction confirmed single-phase orthorhombic perovskite formation with lattice expansion upon La substitution. Field-emission scanning electron microscopy revealed progressive grain refinement, improved densification, and increased density with increasing La content. Electrical measurements showed a drastic reduction in resistivity and activation energy at low to moderate La levels, corresponding to enhanced carrier mobility via Mn3+-O-Mn4+ double-exchange interactions, while excessive doping induces charge-ordering and carrier localization. The Seebeck coefficient remains negative across all compositions, with the highest power factor achieved for x = 0.05. Magnetic characterization indicates a gradual decrease in Néel temperature and the emergence of ferromagnetic correlations with La doping, enhancing the magnetocaloric response. The results demonstrate that moderate La substitution optimizes the interplay between structural, electronic, and magnetic properties, highlighting the potential of Ca1-xLaxMnO3 as a stable and efficient high-temperature n-type thermoelectric material with multifunctional capabilities.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

In situ formation of Ni- and Cr-doped cobalt ferrite pigment in glassy matrix films via laser zone melting

  • Lahlahi-Attalhaoui, A.
  • Porcar, S.
  • Toca, S.
  • Cuadra, J.G.
  • Nebot-Diaz, I.
  • Bakali, J.
  • Mirjolet, M.
  • Kim, M.
  • Franco, C.
  • Pané, S.
  • de la Fuente, G.F.
  • Carda, J.B.
Doped cobalt ferrites (CFO, CoFe₂O₄) are black pigments of considerable interest in ceramic systems, although their conventional production requires high-temperature calcination followed by milling to control particle size. In this work, laser zone melting (LZM) is proposed as an alternative route for the in situ formation and consolidation of CFO spinels directly on the surface, avoiding both pre-synthesis and post-micronization. A precursor layer prepared from milled powders was activated using a high-power nanosecond fiber laser. Irradiance and pulse overlap were systematically varied, identifying an optimal processing window at Oₚ ≈ 97%, with a scanning speed of 2000 mm/s and an irradiance of 3.49 MW/cm². The resulting coatings exhibited distinct crystalline phases together with a vitreous fraction that enabled the integration of ∼200 nm particles into the surface, and L* values as low as 30.55. These findings highlight LZM as a promising route toward ceramic industry electrification and decarbonization.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Massive mitigation of transport AC losses in superconducting hybrid CORC–TSTC cables

  • Al-Ssalih, Hasan N H
  • Badía-Majós, Antonio
  • Ruiz, Harold S
High-current superconducting cables are emerging as key enablers for next-generation power transmission systems; however, their deployment is often limited by transport AC losses. Hybrid superconducting cables combining Conductor-on-Round-Core (CORC) and Twisted Stacked-Tape Conductor (TSTC) architectures have recently been proposed as a promising route toward high-current-capacity power cables and compact form factors. However, their electrodynamic response under transport current operation remains poorly understood, particularly regarding how current feeding conditions govern internal current redistribution. Here, we employ a three-dimensional electromagnetic model, previously validated against magnetization experiments in equivalent cables, to investigate the influence of the current feeding scheme on the electrodynamic behaviour of hybrid CORC–TSTC cables under self-field conditions. By comparing configurations in which the total current is either injected through a common connection between the CORC and TSTC conductors (non-insulated feeding) or supplied independently to each conductor (insulated feeding), we show that electrical coupling in non-insulated designs leads to strong current redistribution, inducing pronounced waveform distortion and elevated AC losses once the CORC layers approach magnetic saturation. In contrast, independent current feeding suppresses inter-conductor current exchange, stabilizes the current waveforms, and exhibits an outstanding reduction in transport AC losses of up to 90% at practical operating currents, compared with conventional feeding schemes. These findings reveal the central role of the current feeding scheme in governing the internal electrodynamics and energy dissipation of hybrid superconducting cables, and identify the electrical decoupling of the constituent conductors at the feeding point as a simple and scalable route toward ultra-efficient hybrid superconducting power cables.