Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis de maestría (MasterThesis)

Proyecto de estructura y de instalaciones de un edificio de servicios y mantenimiento para una planta logística en Parc Sagunt (Valencia), Project of structure and installations for a services and maintenance building for a logistic plant in Parc Sagunt (Valencia), Projecte de estructura i d&apos, instal·lacions d&apos, un edifici de serveis i manteniment per a una planta logística en Parc Sagunt (València)

  • Manresa Verdú, Joaquín
[ES] El objeto de este Trabajo Fin de Máster consiste en el diseño de una nave industrial ubicada en el parque empresarial Parc Sagunt (Valencia). Este proyecto estará destinado a albergar los repuestos de mantenimiento de la planta logística a la cual pertenece y, a su vez, la nave dispone de un espacio reservado para los trabajadores. El edificio tiene una superficie construida de 1300 m2 con una altura de cumbrera de 9.2 m. Se proyecta una nave de estructura metálica con vigas de celosía tipo Warren, en dos direcciones, con pilares metálicos. La cimentación se resuelve mediante zapatas excéntricas. Además, en este presente proyecto se pretende describir y justificar la instalación de Protección contra Incendios del establecimiento industrial. Por ello, se establecen los requisitos que deben satisfacer y las condiciones que debe cumplir para su seguridad en caso de incendio. Por último, se realizará el diseño y cálculo del sistema la Instalación de Fontanería y Saneamiento. La red de saneamiento de este proyecto será separativa., [EN] The purpose of this Master's Thesis is to design an industrial warehouse in the Parc Sagunt business park (Valencia). This project will be used to store maintenance and spare parts for the logistic plant to which it belongs; also, it has a space reserved for workers. The building has a constructed area of 1,300 m^2 with a ridge height of 8.2 m. It projects a steel structure with metallic pillars with Warren-type lattice beams in two directions. The foundation of the structure is resolved with eccentric footings. In addition, this current project will describe and justify the installation of Fire Protection of the industrial establishment. For this reason, it will expose the requirements and the conditions necessary to guarantee safety in case of a fire. Furthermore, the design and calculation of the Plumbing and Sanitation Installation system will be carried out. The sanitation network of the project will be separate., [CA] L'objecte d'aquest Treball Fi de Màster consisteix en el disseny d'una nau industrial situada al parc empresarial Parc Sagunt (València). Aquest projecte estarà destinat a albergar els recanvis de manteniment de la planta logística a la qual pertany i, a més, la nau disposa d'un espai reservat per als treballadors. L'edifici té una superfície construïda de 1300 𝑚�ଶ amb una altura de carener de 9.2 m. Es projecta una nau d'estructura metàl·lica amb bigues de gelosia tipus Warren, en dues direccions, amb pilars metàl·lics. La fonamentació de l’estructura es resol mitjançant sabates excèntriques. A més, en aquest present projecte es pretén descriure i justificar la instal·lació de Protecció contra Incendis de l'establiment industrial. Per això, s'estableixen els requisits que han de satisfer i les condicions que ha de complir per a la seua seguretat en cas d'incendi. Finalment, es realitzarà el disseny i càlcul del sistema la Instal·lació de Fontaneria i Sanejament. La xarxa de sanejament d'aquest projecte serà separativa.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Plasma dynamics and structural modifications induced by femtosecond laser pulses in quartz

  • Hernandez-Rueda, J.
  • Puerto García, Daniel
  • Siegel, J.
  • Galvan-Sosa, M.
  • Solis, J.
[EN] We have investigated plasma formation and relaxation dynamics induced by single femtosecond laser pulses at the surface of crystalline SiO 2 (quartz) along with the corresponding topography modifications. The use of fs-resolved pump-probe microscopy allows combining spatial and temporal resolution and simultaneous access to phenomena occurring in adjacent regions excited with different local fluences. The results show the formation of a transient free-electron plasma ring surrounding the location of the inner ablation crater. Optical microscopy measurements reveal a 30% reflectivity decrease in this region, consistent with local amorphization. The accompanying weak depression of ¿15 nm in this region is explained by gentle material removal via Coulomb explosion. Finally, we discuss the timescales of the plasma dynamics and its role in the modifications produced, by comparing the results with previous studies obtained in amorphous SiO 2 (fused silica). For this purpose, we have conceived a new representation concept of time-resolved microscopy image stacks in a single graph, which allows visualizing quickly suble differences of the overall similar dynamic response of both materials. © 2011 Elsevier B.V., This work has been partially supported by the Spanish TEC2008-01183 project. J.H.-R. acknowledges a grant under the same project. D.P. acknowledges a grant of the Spanish Ministry of Science and Education under TEC 2005-00074.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Correlation of the refractive index change at the surface and inside phosphate glass upon femtosecond laser irradiation

  • Puerto Garcia, Daniel
  • Siegel, Jan
  • Ferrer, Andres
  • Hernandez-Rueda, Javier
  • Solis, Javier
[EN] A study of the surface modification induced by single femtosecond laser pulses in phosphate glass has revealed surface swelling at fluences just below the ablation threshold. This behavior is different from that observed in other dielectric materials. Optical micrographs obtained with monochromatic light show a pattern of Newton rings within the swollen region whose number scales inversely with the illumination wavelength, acting as a micro Fabry-Perot etalon. The swollen surface layer has lower refractive index than the bulk glass and can reach a maximum thickness of 820 nm. We relate these findings to results obtained during subsurface waveguide writing inside phosphate glass, which also show a refractive index decrease at energies near threshold for waveguide fabrication. We have identified low density free-electron plasma to be the trigger of the refractive index change. © 2012 Optical Society of America., We thank Daniel Jaque from the Fluorescence Imaging Group at the Universidad Autonoma de Madrid for providing access to and helping with the confocal microfluorescence imaging system, as well as for many fruitful discussions. We are also grateful to Susana Marcos and Carlos Dorronsoro from IO-CSIC for providing access and assistance to the OIM. This work has been partially supported by the Spanish TEC 2008-01183 and TEC2011-22422. D. Puerto acknowledges his grant of the Spanish Ministry of Science and Education under TEC 2005-0007 and JCI-2010-07479.
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Third order nonlinear susceptibility of InN at near band-gap wavelengths

  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fernández, H.
  • Solis, J.
  • Monroy, Eva
The authors report room-temperature measurements of the third order nonlinear susceptibility modulus ∣∣χ(3)∣∣∣χ(3)∣ of thick (∼600nm)(∼600nm) InN layers. Transmission measurements provide a room-temperature value for the optical band gap of the samples slightly above 1500nm1500nm. Third order nonlinear optical susceptibility has been measured using degenerate four wave mixing experiments at wavelengths near and above band gap. ∣∣χ(3)∣∣∣χ(3)∣ values of (4.2–10)×10−10esu(4.2–10)×10−10esu were measured at this wavelength range. The associated relaxation time of the generated population grating at 1500nm1500nm was measured. The obtained value of 4.8ps4.8ps is consistent with a nonradiative recombination mechanism., Comunidad de Madrid, Ministerio de Educación y Ciencia, Consejo Superior de Investigaciones Científicas
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Non linear properties of nitride-based nanostructures for optically controlling the speed of light at 1.5 μm

  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Valdueza Felip, Sirona|||0000-0003-1817-5354
  • Fernández, H.
  • Solis, J.
  • Fernández, S.
  • Monroy, Eva
  • Grandal, J.
  • Sánchez García, Miguel Ángel
Future bandwidth demand in optical communications requires all-optical devices based on optical non-linear behavior of materials. InN, with a room temperature direct bandgap well below 0.82 eV (1.5 μm) is very attractive for these applications. In this work, we characterize the non-linear optical response and recombination lifetime of the interband transition of InN layers grown on GaN template and Si(1 1 1) by molecular beam epitaxy. Non-linear characterization shows a decrease of the third-order susceptibility, χ(3), and an increase of recombination lifetime when decreasing the energy difference between the excitation and the apparent optical band-gap energy of the analysed samples. Taking into account the non-linear characterization, an optically controlled reduction of the speed of light by a factor S=4.2 is obtained for bulk InN at 1.5 μm. The S factor of InN (5 nm)/In0.7Ga0.3N (8 nm) multiple quantum well heterostructures at the same operation wavelength is analysed, predicting an increase of this factor of three orders of magnitude. This result would open the possibility of using InN-based heterostructures for all-optical devices applications. © 2008 Elsevier Ltd. All rights reserved., Ministerio de Educación y Ciencia, Consejo Superior de Investigaciones Científicas, Universidad de Alcalá, Comunidad de Madrid