Skip to main content

ESTRATEGIAS DE DISEÑO DE INTERFACES MICROELECTRONICOS RECONFIGURABLES PARA SISTEMAS CIBER-FISICOS

TEC2012-30802

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2012
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Secretaría de Estado de Investigación, Desarrollo e Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A high performance LIA-based interface for battery powered sensing devices

  • García-Romeo, D.
  • Valero, M.R.
  • Medrano, N.
  • Calvo, B.
  • Celma, S.
This paper proposes a battery-compatible electronic interface based on a general purpose lock-in amplifier (LIA) capable of recovering input signals up to the MHz range. The core is a novel ASIC fabricated in 1.8 V 0.18 µm CMOS technology, which contains a dual-phase analog lock-in amplifier consisting of carefully designed building blocks to allow configurability over a wide frequency range while maintaining low power consumption. It operates using square input signals. Hence, for battery-operated microcontrolled systems, where square reference and exciting signals can be generated by the embedded microcontroller, the system benefits from intrinsic advantages such as simplicity, versatility and reduction in power and size. Experimental results confirm the signal recovery capability with signal-to-noise power ratios down to -39 dB with relative errors below 0.07% up to 1 MHz. Furthermore, the system has been successfully tested measuring the response of a microcantilever-based resonant sensor, achieving similar results with better power-bandwidth trade-off compared to other LIAs based on commercial off-the-shelf (COTS) components and commercial LIA equipment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Explosives Detection by Array of Si µ -Cantilevers Coated with Titanosilicate-Type Nanoporous Materials

  • Pina Iritia, M.P.
  • Almazán, F.
  • Eguizábal, A.
  • Pellejero, I.
  • Urbiztondo, M.
  • Sesé, J.
  • Santamaría, J.
  • García-Romeo, D.
  • Calvo, B.
  • Medrano, N.
An array comprising four Si µ -cantilevers coated with nanoporous functionalized ETS-10 crystals sub-micrometric in size has been developed as a multisensing platform for explosives recognition in vapor phase. The detection capabilities of the proposed device have been tested for common taggants such as 1-methyl-2-nitro-benzene (o-MNT)] and explosives (commercial detonation cord, a plastic tube filled with pentaerythritol tetranitrate (PETN); and C-4, a mixture of cyclotrimethylenetrinitramine (RDX), binders and plastifiers). The general strategy for the detection of explosives in vapor phase is based on the characteristic fingerprint each one produces as a result of the dissimilar chemical interactions between the ETS-10 coated µ -cantilevers and the target molecules emanating from the explosives and swept by ambient air. A portable lock-in amplifier has been implemented to exploit the truly benefits of the array in terms of portability, reduced size, and energy consumption. Such low-power electronic interface is capable of creating the excitation signal as well as obtaining the response values of four resonating µ -cantilevers simultaneously. The resulting sensing platform has successfully been applied for the o-MNT, PETN, and RDX detection at trace level.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Reliable Lifespan Evaluation of a Remote Environment Monitoring System Based on Wireless Sensor Networks and Global System for Mobile Communications

  • Antolin, D.
  • Medrano, N.
  • Calvo, B.
The use of wireless sensor networks (WSN) for monitoring physical and chemical variables in large areas allows density and frequency measurements which have been unavailable to date in classical measurement systems. To fully take advantage of this technology in a particular application, besides an accurate design and selection of all the components involved in its operation, it is essential to dispose of reliable lifetime estimation prior to deployment. This paper presents an experimental approach to determine the actual lifetime of such battery-operated systems, making use of a custom WSN architecture, and for different batteries technologies. To render a reliable evaluation, the energy consumption of the sensor nodes under their different operation modes, in correlation with the battery characteristics and the voltage regulation system, is jointly considered. The result is a complete and practical lifetime model, whose appropriate performance has been validated in a real deployment scenario.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

Portable lock-in amplifier for microcantilever based sensor array. Application to explosives detection using Co-BEA type zeolites as sensing materials

  • García-Romeo, D.
  • Calvo, B.
  • Medrano, N.
  • Pina, M.P.
  • Almazán, F.
  • Pellejero, I.
  • Urbiztondo, M.
  • Sesé, J.
  • Santamaría, J
Recent advances in microcantilever-based sensors have led to a significant increase in sensitivity, making them a competitive solution in highly demanding applications as explosives detection. However, these sensors face severe challenges related to: reliability, sensitivity, reproducibility and throughput; that have yet to be solved for commercial applications. This paper describes our efforts in this direction, particularly on the reproducible detection of nitroaromatic type explosives by means of parallelization combined with: i) nanoporous solids as sensing materials; and, ii) a portable lowpower electronic readout interface capable of both excitation and measurement of the multisensing platform. The response of the sensor array, comprising 4 microcantilevers, due to presence of 2-nitrotoluene, a common explosive taggant, has been properly monitored. The obtained results with 4 identical Co-BEA coated Si microcantilevers underline the importance of a proper sensing material degassing on the sensor performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Portable low-power electronic interface for explosive detection using microcantilevers

  • García-Romeo, D.
  • Pellejero, I.
  • Urbiztondo, M. A.
  • Sesé, J.
  • Pina, M. P.
  • Martínez, P. A.
  • Calvo, B.
  • Medrano, N.
Microcantilevers have been recently revealed as a highly effective technique for gas detection at trace level when acting as chemical sensors. However, an important milestone still remains to achieve a full-scale development in commercial applications: the cumbersome systems traditionally used to read-out its responses. To accomplish this, a portable low-power electronic interface, based on an analog lock-in amplifier processing square signals, which is fully capable of creating the excitation signal as well as obtaining the response values from resonating microcantilevers functionalized with zeolite based coatings has been herein attempted. The so obtained read-out results are in good agreement with the commercial lock-in amplifier's measurements, demonstrating the accuracy and reliability of the electronic interface. Finally, its performance has been validated for 2-nitrotoluene (o-MNT) detection at ppm V level, as an example of an explosive-related molecule, with BEA zeolite coated microcantilevers. Theoretical limit of detection (LOD) values below 100 ppb have been obtained for Co exchanged BEA modified sensors.