Skip to main content

DESARROLLO DE SONDAS Y VALIDACION DE RESULTADOS NUMERICOS EN EL DOMINIO DEL TIEMPO PARA EFECTOS INDIRECTOS DE DESCARGAS ATMOSFERICAS EN UAV

TEC2013-48414-C3-3-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

SIVA UAV: A Case Study for the EMC Analysis of Composite Air Vehicles

  • Cabello, Miguel R.
  • Fernández, Sergio
  • Pous, Marc
  • Pascual-Gil, Enrique
  • Angulo, Luis D.
  • López, Patricia
  • Riu, Pere J.
  • Gutierrez, Guadalupe G.
  • Mateos, Daniel
  • Poyatos, David
  • Fernandez, Mireya
  • Alvarez, Jesus
  • Pantoja, Mario F.
  • Añón, Manuel
  • Silva, Ferran
  • Nuño Fernández, Luis|||0000-0001-8486-0582
[EN] The increased use of carbon-fiber composites in unmanned aerial vehicles is a challenge for their EMC assessment by numerical solvers. For accurate and reliable simulations, numerical procedures should be tested not only for individual components, but also within the framework of complete systems. With this aim, this paper presents a benchmark test case based on experimental measurements coming from direct-current injection tests in the SIVA unmanned air vehicle, reproduced by a numerical finite-difference-time-domain solver that employs a new subgridding scheme to treat lossy composite thin panels. Validation was undertaken by applying the feature selective validation method, which quantifies the agreement between experimental and numerical data., This work was supported by the Projects TEC2013-48414C3-{ 1,2,3}-R, TEC2016-79214-C3-{1,2,3}-R, and TEC2015-68766-REDC (Spanish MINECO, EU FEDER), P12-TIC-1442 (J. de Andalucia, Spain), Alhambra-UGRFDTD (AIRBUS DS), and by the CSIRC alhambra.ugr.es supercomputing center.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Electromagnetic characterization of 3D printed antennas employing conductive filament

  • Pous Solà, Marc|||0000-0003-2660-5254
  • Azpúrua Auyanet, Marco Aurelio|||0000-0001-8078-5116
  • Quílez Figuerola, Marcos|||0000-0003-1698-2929
  • Mateu Mateus, Marc|||0000-0002-6849-7426
  • Fernández Chimeno, Mireya|||0000-0001-8384-1320
  • Silva Martínez, Fernando|||0000-0003-3019-3993
This work presents the need to accurately define EM characterization of novel materials like the 3D conductive filament. Although these construction techniques and materials are currently used by the industry, the influence of the manufacturing process is still not properly characterized. In this paper, different monopoles are assembled modifying the 3D printing structure when a conductive filament is employed to fabricate the radiating element. Measurements of the S 11 parameter are combined with electromagnetic simulations to determine the different performances of the built antennas. The results highlight that the definition of the printing parameters has a strong influence on the conductivity of the resulting 3D printed monopoles, producing remarkable variations at the antenna performance. Modifying the results from monopoles not suitable to propagate to performances that can produce proper electromagnetic fields., This work was supported by the Spanish “Ministerio de Economía, Industria y Competitividad” under project TEC2016-79214-C3-2-R (AEI/FEDER, UE), Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Electromagnetic characterization of 3D printed antennas employing conductive filament

  • Pous Solà, Marc
  • Azpúrua Auyanet, Marco Aurelio
  • Quílez Figuerola, Marcos
  • Mateu Mateus, Marc
  • Fernández Chimeno, Mireya
  • Silva Martínez, Fernando
This work presents the need to accurately define EM characterization of novel materials like the 3D conductive filament. Although these construction techniques and materials are currently used by the industry, the influence of the manufacturing process is still not properly characterized. In this paper, different monopoles are assembled modifying the 3D printing structure when a conductive filament is employed to fabricate the radiating element. Measurements of the S 11 parameter are combined with electromagnetic simulations to determine the different performances of the built antennas. The results highlight that the definition of the printing parameters has a strong influence on the conductivity of the resulting 3D printed monopoles, producing remarkable variations at the antenna performance. Modifying the results from monopoles not suitable to propagate to performances that can produce proper electromagnetic fields., This work was supported by the Spanish “Ministerio de Economía, Industria y Competitividad” under project TEC2016-79214-C3-2-R (AEI/FEDER, UE), Peer Reviewed, Postprint (author's final draft)