Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

3D laser-written silica glass step-index high-contrast waveguides for the 3.5 μm mid-infrared range

  • Martínez, J.
  • Ródenas, A.
  • Fernández, T.
  • Vázquez de Aldana, Javier R.
  • Thomson, Robert R.
  • Aguiló, Magdalena
  • Kar, A.K.
  • Solís Céspedes, Javier
  • Díaz, Francesc
4 págs.; 6 figs.; OCIS codes: (130.2755) Glass waveguides; (140.3390) Laser materials processing; (220.4000) Microstructure fabrication., We report on the direct laser fabrication of step-index waveguides in fused silica substrates for operation in the 3.5 μm mid-infrared wavelength range. We demonstrate corecladding index contrasts of 0.7% at 3.39 μm and propagation losses of 1.3 (6.5) dB/cm at 3.39 (3.68) μm, close to the intrinsic losses of the glass. We also report on the existence of three different laser modified SiO glass volumes, their different micro-Raman spectra, and their different temperaturedependent populations of color centers, tentatively clarifying the SiO lattice changes that are related to the large index changes. © 2015 Optical Society of America, Spanish Government (MAT2013-47395-C4-4- R, TEC2014-55948-R, TEC2014-52642-C2-1-R, FIS2013- 44174-P); Catalan Government (2009SGR235, 2014FI_B 00274); European Commission (EC) (ACP2-GA-2013-314335- JEDI ACE)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Growth of ZnO nanostructures by femtosecond laser irradiation of polycrystalline targets

  • Escalante, G.
  • Ryu, Y. K.
  • Cruz, A. R. de la
  • Puerto, D.
  • Solís Céspedes, Javier
  • Fernández, P.
10 págs.; 10 figs., The formation of LIPSS upon irradiation with ultrashort laser pulses on the surface of polycrystalline ZnO samples and the potential use of irradiated areas as growth patterns for the production of highly ordered nanostructures upon redeposition have been studied. For this purpose, we have performed different sets of irradiation experiments including static irradiation experiments at low and high repetition rates, as well as scanned beam experiments at high repetition rate, this later in order to generate relatively large template regions for nanostructure growth by redeposition. In all cases, LIPSS formation has been achieved in the ZnO polycrystalline surface. Under appropriate irradiation conditions, the material is redeposited rendering a high density of nanostructures with high aspect ratios and good crystal quality. Given the special luminescent properties and applications of ZnO, particular attention has been paid to the luminescence properties after irradiation and after post-irradiation thermal treatments. The observed evolution has been correlated with evolution of point defects in the treated surfaces. Thermal treatments cause significant changes in both the topography and the cathodoluminescent emission, such as the development of laminar structures, the emergence of nucleation centers and the recovery of ultraviolet emission previously quenched as a consequence of irradiation. Interestingly, LIPSS remain after the luminescent recovery by thermal annealing, opening the possibility to control both luminescence properties and grain size while maintaining an ordered structure with a high effective surface area., This work was partially supported by the Spanish Ministry Economy and Competitiveness (TEC2011-22422, TEC2014-52642-C2-1-R, MAT 2012-31959 and CSD2009-00013). G. Escalante acknowledges CONACYT for the postdoc grant., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Femtosecond laser-controlled self-assembly of amorphous-crystalline nanogratings in silicon

  • Puerto, D.
  • García-Lechuga, Mario
  • Hernández Rueda, Javier
  • García-Leis, Adianez
  • Sánchez-Cortés, Santiago
  • Solís Céspedes, Javier
  • Siegel, Jan
8 págs.; 5 figs.; 1 tab., Self-assembly (SA) of molecular units to form regular, periodic extended structures is a powerful bottom-up technique for nanopatterning, inspired by nature. SA can be triggered in all classes of solid materials, for instance, by femtosecond laser pulses leading to the formation of laser-induced periodic surface structures (LIPSS) with a period slightly shorter than the laser wavelength. This approach, though, typically involves considerable material ablation, which leads to an unwanted increase of the surface roughness. We present a new strategy to fabricate high-precision nanograting structures in silicon, consisting of alternating amorphous and crystalline lines, with almost no material removal. The strategy can be applied to static irradiation experiments and can be extended into one and two dimensions by scanning the laser beam over the sample surface. We demonstrate that lines and areas with parallel nanofringe patterns can be written by an adequate choice of spot size, repetition rate and scan velocity, keeping a constant effective pulse number (N ) per area for a given laser wavelength. A deviation from this pulse number leads either to inhomogeneous or ablative structures. Furthermore, we demonstrate that this approach can be used with different laser systems having widely different wavelengths (1030 nm, 800 nm, 400 nm), pulse durations (370 fs, 100 fs) and repetition rates (500 kHz, 100 Hz, single pulse) and that the grating period can also be tuned by changing the angle of laser beam incidence. The grating structures can be erased by irradiation with a single nanosecond laser pulse, triggering recrystallization of the amorphous stripes. Given the large differences in electrical conductivity between the two phases, our structures could find new applications in nanoelectronics., This work has been supported by the LiNaBioFluid project of the H2020 program of the European Commission (FETOPEN- 665337) as well as by the Spanish TEC2014-52642-C2- 1-R. MG-L and JH-R acknowledge the grants respectively awarded by the Spanish Ministry of Education and the Spanish Ministry of Economy and Competiveness., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Melt front propagation in dielectrics upon femtosecond laser irradiation: Formation dynamics of a heat-affected layer

  • García-Lechuga, Mario
  • Solís Céspedes, Javier
  • Siegel, Jan
5 págs.; 4 figs. 1 tab., Several studies in dielectrics have reported the presence of a thin heat-affected layer underneath the ablation crater produced by femtosecond laser irradiation. In this work, we present a time-resolved microscopy technique that is capable of monitoring the formation dynamics of this layer and apply it to the study of a phosphate glass exposed to single pulses below the ablation threshold. A few nanoseconds after laser excitation, a melt front interface can be detected, which propagates into the bulk, gradually slowing down its speed. By means of image analysis combined with optical modeling, we are able to determine the temporal evolution of the layer thickness and its refractive index. Initially, a strong transient decrease in the refractive index is observed, which partially recovers afterwards. The layer resolidifies after approximately 1 μs after excitation, featuring a maximum thickness of several hundreds of nanometers. Published by AIP Publishing., This work has been partially supported by the Spanish TEC2014-52642-C2-1-R project. M.G.-L. acknowledges the FPU grant awarded by the Spanish Ministry of Education., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ridge waveguide laser in Nd:LiNbO3 by Zn-diffusion and femtosecond-laser structuring

  • Martínez de Mendívil, J.
  • Hoyo, J. del
  • Solís Céspedes, Javier
  • Lifante, G.
4 págs,; 5 figs., Ridge waveguide lasers have been fabricated on Nd doped LiNbO crystals. The fs-laser writing technique was used to define ridge structures on a gradient-index planar waveguide fabricated by Zn-diffusion. This planar waveguide was formed in a z-cut LiNbO substrate homogeneously doped with a 0.23% of Nd ions. To obtain lateral light confinement, the surface was then micromachined using a multiplexed femtosecond laser writing beam, forming the ridge structures. By butting two mirrors at the channel waveguide end-facets, forming a waveguide laser cavity, TM-polarized laser action at 1085 nm was achieved by end-fire TM-pumping at 815 nm. The waveguide laser shows a threshold of 31 mW, with a 7% of slope efficiency. © 2016 Elsevier B.V. All rights reserved, This work was supported by the Spanish Government under projects TEC2014-52642-C2-1-R and MAT2013-47395-C4., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrafast Moving-Spot Microscopy: Birth and Growth of Laser-Induced Periodic Surface Structures

  • García-Lechuga, Mario
  • Puerto, D.
  • Fuentes-Edfuf, Yasser
  • Solís Céspedes, Javier
  • Siegel, Jan
7 págs.; 5 figs., Laser-induced periodic surface structures (LIPSS) are a universal phenomenon observed in all classes of solid materials, giving rise to a variety of self-assembled subwavelength structures with different symmetries. These promising features have opened new opportunities for laser structuring of materials in a wide range of applications, including plasmonics, nanophotonics, nanoelectronics, sensing, and even mechanics. However, there is an ongoing debate about the formation mechanism of LIPSS, and the current picture stems mainly from the combined effort of theoretical modeling and experimental studies of the final structures produced. Here we demonstrate femtosecond-resolved imaging of the formation process of such structures produced by ultrashort laser pulses in silicon. The particular type of LIPSS studied are well-aligned amorphous-crystalline fringes generated in dynamic processing conditions, whose period can be tuned and which can be extended over large areas. Using a moving-spot, multiple-pulse irradiation approach we are able to spatially and temporally resolve the birth and growth of individual fringes. We demonstrate that the formation process is initiated by free electron generation leading to nonthermal melting, liquid phase overheating, and rapid solidification into the amorphous phase. © 2016 American Chemical Society, This work has been supported by the LiNaBioFluid project (H2020-FETOPEN-2014-2015RIA, grant 665337) of the European Commission as well as by the Spanish Ministry of Economy and Competiveness through research grant TEC2014-52642-C2-1-R and an FPU fellowship for M.G.-L from the Spanish Ministry of Education, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Three‐Dimensional self‐organization in nanocomposite layered systems by ultrafast laser pulses

  • Liu, Z.
  • Siegel, Jan
  • García-Lechuga, Mario
  • Epicier, T.
  • Lefkir, Y.
  • Reynaud, S.
  • Bugnet, M.
  • Vocanson, F.
  • Solís Céspedes, Javier
  • Vitrant, G.
  • Destouches, N.
10 pags., 6 figs., Controlling plasmonic systems with nanometer resolution in transparent films and their colors over large nonplanar areas is a key issue for spreading their use in various industrial fields. Using light to direct self-organization mechanisms provides high-speed and flexible processes to meet this challenge. Here, we describe a route for the laser-induced self-organization of metallic nanostructures in 3D. Going beyond the production of planar nanopatterns, we demonstrate that ultrafast laser-induced excitation combined with nonlinear feedback mechanisms in a nanocomposite thin film can lead to 3D self-organized nanostructured films. The process, which can be extended to complex layered composite systems, produces highly uniform large-area nanopatterns. We show that 3D self-organization originates from the simultaneous excitation of independent optical modes at different depths in the film and is activated by the plasmon-induced charge separation and thermally induced NP growth mechanisms. This laser color marking technique enables multiplexed optical image encoding and the generated nanostructured Ag NPs:TiO2 films offer great promise for applications in solar energy harvesting, photocatalysis, or photochromic devices., This work was funded by the French Research Agency (ANR) in the framework of project PHOTOFLEX 12-NANO-0006 and programs ANR-10-LABX-0075 (Labex MANUTECHSISE) and ANR-11-IDEX-0007. It has also been supported by the LiNaBioFluid project (H2020-FETOPEN-2014- 2015RIA, grant 665337) of the European Commission, as well as by a research grant (TEC2014-52642-C2-1-R) from the Spanish Ministry of Economy and Competitiveness. M.G.-L. thanks the Spanish Ministry of Education for a FPU fellowship. The authors thank CLYM (www.clym.fr) for access to the Jeol 2010F TEM and the FEI Titan ETEM G2 80-300. GIE MANUTECH-USD is acknowledged for providing access to the FEI Dual Beam Helios600i., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coherent scatter-controlled phase-change grating structures in silicon using femtosecond laser pulses

  • Fuentes-Edfuf, Yasser
  • García-Lechuga, Mario
  • Puerto, D.
  • Florian, Camilo
  • García-Leis, Adianez
  • Sánchez-Cortés, Santiago
  • Solís Céspedes, Javier
  • Siegel, Jan
12 pags., 12 figs. -- Open Access funded by Creative Commons Atribution Licence 4.0, Periodic structures of alternating amorphous-crystalline fringes have been fabricated in silicon using repetitive femtosecond laser exposure (800 nm wavelength and 120 fs duration). The method is based on the interference of the incident laser light with far- and near-field scattered light, leading to local melting at the interference maxima, as demonstrated by femtosecond microscopy. Exploiting this strategy, lines of highly regular amorphous fringes can be written. The fringes have been characterized in detail using optical microscopy combined modelling, which enables a determination of the three-dimensional shape of individual fringes. 2D micro-Raman spectroscopy reveals that the space between amorphous fringes remains crystalline. We demonstrate that the fringe period can be tuned over a range of 410 nm - 13 μm by changing the angle of incidence and inverting the beam scan direction. Fine control over the lateral dimensions, thickness, surface depression and optical contrast of the fringes is obtained via adjustment of pulse number, fluence and spot size. Large-area, highly homogeneous gratings composed of amorphous fringes with micrometer width and millimeter length can readily be fabricated. The here presented fabrication technique is expected to have applications in the fields of optics, nanoelectronics, and mechatronics and should be applicable to other materials., M.G.-L. thanks the Spanish Ministry of Education for a FPU fellowship. This work was supported by the LiNaBioFluid project (H2020-FETOPEN-2014-2015RIA, grant 665337) of the European Commission; and the research grant (TEC2014-52642-C2-1-R) from the Spanish Ministry of Economy and Competitiveness., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Harsh-environment-resistant OH-vibrations-sensitive mid-infrared water-ice photonic sensor

  • Martínez, Javier
  • Ródenas, A.
  • Stake, A.
  • travería, M.
  • Aguiló, Magdalena
  • Solís Céspedes, Javier
  • Osellame, R.
  • Tanaka, T.
  • Berton, B.
  • Kimura, S.
  • Rehfeld, N.
  • Díaz, Francesc
State-of-the-art ultrahigh-sensitivity photonic sensing schemes rely on exposing the evanescent field of tightly confined light to the environment. Yet, this renders an inherent fragility to the device, and since adding a protective layer disables light exposure, there exists a technology gap for highly sensitive harsh-environment-resistant surface photonic sensors. Here, a novel type of mid-infrared waveguide sensors is reported which exploit vibrational resonance-driven directional coupling effects besides absorption, with optical sensing elements that can be buried (≈1–10 µm) and resist systematic exposure to industrial environments without failure. A harsh-environment-resistant, fiber-coupled, surface sensor for monitoring the structural phase of water (liquid-supercooled-solid), as well as the type of ice microstructure (clear rime), is shown. It is demonstrated how this type of sensor can be designed to detect ice layers with nanometric (≈100 nm) to microscopic (≈30 µm or higher) thicknesses, and the first experimental tests both in optical laboratory and in icing wind tunnel inflight aircraft simulation tests are reported., European Union's Seventh Framework Program, Japanese‐European De‐Icing Aircraft Collaborative Exploration. Grant Number: 314335,Japanese Ministry of Economy, Trade and Industry, MINECO, FEDER. Grant Number: MAT2016‐75716‐C2‐1‐R, Ministry of Economy, Industry and Competitiveness. Grant Numbers: TEC2014‐55948‐R, TEC2014‐52642‐C2‐1‐RF,Generalitat de Catalunya. Grant Number: 2014SGR1358, LASERLAB‐EUROPE, European Union's Horizon 2020. Grant Number: 654148, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of melting conditions on the water content and structure of K2O-La2O3-Al2O3-P2O5 glasses

  • Muñoz, Francisco
  • Moreno Zarate, Pedro
  • Solís Céspedes, Javier
6 pags., 6 figs., 1 tab., Glasses of the system of composition K2O-La2O3-Al2O3-SiO2-P2O5 have recently gained attention due to their response to femtosecond (fs) laser irradiation, and the fact that high repetition rate fs-laser writing allows for the production of very efficient waveguides. When doped with rare-earth ions, the glasses can also be used in amplifiers or lasers and, in this respect, a control of the water content in the phosphate-based glasses is of very high importance. Thus, in the present work we have studied the influence of the melting conditions on the final water content of glasses of the above system and on their structure as studied by Raman and Nuclear Magnetic Resonance spectroscopies. Increasing temperature and melting times conducts to the enrichment in SiO2 and a depletion of K2O and P2O5 contents in parallel with a reduction of the water content as measured by FTIR. On the other hand, the structural study showed that the chemical environment of phosphorous and silicon are not much affected by the changes in composition and that aluminium moves from being 6-fold coordinated to 4-fold. Finally, it has also been observed that SiO2 enters in the glasses as fully polymerized, which is consistent with the reduction of water directly on the ratio between oxygen and phosphorus in the glasses., This work has been partly funded by projects MAT2013-48246-C2-1-P and TEC2014-52642-C2-1-R from the Spanish Ministry of Economy and Competitiveness. The authors thank G. Tricot from University of Lille 1 for assistance with analysis of NMR spectra and CONACYT (Mexico) for funding of a postdoctoral stay of P. Moreno-Zárate at the Institute of Optics of CSIC., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rapid and robust control of single quantum dots

  • Accanto, N.
  • Roque, Pablo M.
  • Galván-Sosa, Marcial
  • Christodoulou, S.
  • Moreels, I.
  • Hulst, N. F. van
7 pags., 4 figs. -- Open Access funded by Creative Commons Atribution Licence 4.0, The combination of single particle detection and ultrafast laser pulses is an instrumental method to track dynamics at the femtosecond time scale in single molecules, quantum dots and plasmonic nanoparticles. Optimal control of the extremely short-lived coherences of these individual systems has so far remained elusive, yet its successful implementation would enable arbitrary external manipulation of otherwise inaccessible nanoscale dynamics. In ensemble measurements, such control is often achieved by resorting to a closed-loop optimization strategy, where the spectral phase of a broadband laser field is iteratively optimized. This scheme needs long measurement times and strong signals to converge to the optimal solution. This requirement is in conflict with the nature of single emitters whose signals are weak and unstable. Here we demonstrate an effective closed-loop optimization strategy capable of addressing single quantum dots at room temperature, using as feedback observable the two-photon photoluminescence induced by a phase-controlled broadband femtosecond laser. Crucial to the optimization loop is the use of a deterministic and robust-against-noise search algorithm converging to the theoretically predicted solution in a reduced amount of steps, even when operating at the few-photon level. Full optimization of the single dot luminescence is obtained within ∼100 trials, with a typical integration time of 100 ms per trial. These times are faster than the typical photobleaching times in single molecules at room temperature. Our results show the suitability of the novel approach to perform closed-loop optimizations on single molecules, thus extending the available experimental toolbox to the active control of nanoscale coherences., This research was funded by the European Commission (ERC Adv. Grant 247330-NanoAntennas and ERC Adv. Grant 670949-LightNet), Spanish Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0522), Plan Nacional Project FIS2012-35527, co-funded by FEDER, the Catalan AGAUR (2014 SGR01540) and Fundació CELLEX (Barcelona). PMdR acknowledges financial support from Spanish Government MINECO-FPI grant and European Science Foundation under the PLASMON-BIONANOSENSE Exchange Grant program. MGS acknowledges financial support from grants MICINN TEC2011-22422 and MINECO TEC2014-52642-C2-1-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Simultaneous time-space resolved reflectivity and interferometric measurements of dielectrics excited with femtosecond laser pulses

  • García-Lechuga, Mario
  • Haahr-Lillevang, L.
  • Siegel, Jan
  • Balling, P.
  • Guizard, S.
  • Solís Céspedes, Javier
13 pags., 7 figs., 1 tab., Simultaneous time-and-space resolved reflectivity and interferometric measurements over a temporal span of 300 ps have been performed in fused silica and sapphire samples excited with 800 nm, 120 fs laser pulses at energies slightly and well above the ablation threshold. The experimental results have been simulated in the frame of a multiple-rate equation model including light propagation. The comparison of the temporal evolution of the reflectivity and the interferometric measurements at 400 nm clearly shows that the two techniques interrogate different material volumes during the course of the process. While the former is sensitive to the evolution of the plasma density in a very thin ablating layer at the surface, the second yields an averaged plasma density over a larger volume. It is shown that self-trapped excitons do not appreciably contribute to carrier relaxation in fused silica at fluences above the ablation threshold, most likely due to Coulomb screening effects at large excited carrier densities. For both materials, at fluences well above the ablation threshold, the maximum measured plasma reflectivity shows a saturation behavior consistent with a scattering rate proportional to the plasma density in this fluence regime. Moreover, for both materials and for pulse energies above the ablation threshold and delays in the few tens of picoseconds range, a simultaneous >low reflectivity> and >low transmission> behavior is observed. Although this behavior has been identified in the past as a signature of femtosecond laser-induced ablation, its origin is alternatively discussed in terms of the optical properties of a material undergoing strong isochoric heating, before having time to substantially expand or exchange energy with the surrounding media., This work has been partly funded by Laserlab-Europe (Grant Agreement No. 284464, EU’s Seventh Framework Programme, Project No. SLIC002014), by the Spanish Ministry of Economy and Competiveness (Project No. TEC2014-52642- C2-1-R) as well as by the Danish Council for Independent Research | Natural Sciences. M.G.-L. acknowledges the FPU (Formación de Profesorado Universitario) Grant No. AP2012- 0217 awarded by the Spanish Ministry of Education., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Key stages of material expansion in dielectrics upon femtosecond laser ablation revealed by double-color illumination time-resolved microscopy

  • García-Lechuga, Mario
  • Solís Céspedes, Javier
  • Siegel, Jan
8 pags., 6 figs., The physical origin of material removal in dielectrics upon femtosecond laser pulse irradiation (800 nm, 120 fs pulse duration) has been investigated at fluences slightly above ablation threshold. Making use of a versatile pump–probe microscopy setup, the dynamics and different key stages of the ablation process in lithium niobate have been monitored. The use of two different illumination wavelengths, 400 and 800 nm, and a rigorous image analysis combined with theoretical modelling, enables drawing a clear picture of the material excitation and expansion stages. Immediately after excitation, a dense electron plasma is generated. Few picoseconds later, direct evidence of a rarefaction wave propagating into the bulk is obtained, with an estimated speed of 3650 m/s. This process marks the onset of material expansion, which is confirmed by the appearance of transient Newton rings, which dynamically change during the expansion up to approximately 1 ns. Exploring delays up to 15 ns, a second dynamic Newton ring pattern is observed, consistent with the formation of a second ablation front propagating five times slower than the first one., This work has been partly funded by the Spanish Ministry of Economy and Competiveness (Project No. TEC2014-52642-C2-1-R). M.G.-L. acknowledges the FPU (Formación de Profesorado Universitario) Grant No. AP2012-0217 awarded by the Spanish Ministry of Education., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Biomimetic surface structures in steel fabricated with femtosecond laser pulses: influence of laser rescanning on morphology and wettability

  • Florian, Camilo
  • Mimidis, A.
  • Puerto, D.
  • Skoulas, E.
  • Stratakis, E.
  • Solís Céspedes, Javier
  • Siegel, Jan
11 pags., 5 figs., 1 tab. -- Open Access funded by Creative Commons Atribution Licence 4.0. -- This article is part of the Thematic Series "Biological and biomimetic surfaces: adhesion, friction and wetting phenomena"., The replication of complex structures found in nature represents an enormous challenge even for advanced fabrication techniques, such as laser processing. For certain applications, not only the surface topography needs to be mimicked, but often also a specific function of the structure. An alternative approach to laser direct writing of complex structures is the generation of laser-induced periodic surface structures (LIPSS), which is based on directed self-organization of the material and allows fabrication of specific micro- and nanostructures over extended areas. In this work, we exploit this approach to fabricate complex biomimetic structures on the surface of steel 1.7131 formed upon irradiation with high repetition rate femtosecond laser pulses. In particular, the fabricated structures show similarities to the skin of certain reptiles and integument of insects. Different irradiation parameters are investigated to produce the desired structures, including laser repetition rate and laser fluence, paying special attention to the influence of the number of times the same area is rescanned with the laser. The latter parameter is identified to be crucial for controlling the morphology and size of specific structures. As an example for the functionality of the structures, we have chosen the surface wettability and studied its dependence on the laser processing parameters. Contact angle measurements of water drops placed on the surface reveal that a wide range of angles can be accessed by selecting the appropriate irradiation parameters, highlighting also here the prominent role of the number of scans., This work has been supported by the LiNaBioFluid Project (H2020-FETOPEN-2014–2015RIA, Grant No. 665337) of the European Commission as well as the research grant (TEC2014–52642-C2–1-R) from the Spanish Ministry of Economy and Competitiveness, Peer Reviewed