Skip to main content

DISPOSITIVOS PASIVOS BASADOS EN MATERIALES FUNCIONALES AVANZADOS CON RESONADORES DE ALTAS PRESTACIONES

TEC2014-53088-C3-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simple closed-form property expressions of a metafluid composed of a hexagonal array of transversely isotropic elastic fibres embedded in an ideal fluid

  • Sabina, Federico J.
  • Guinovart-Díaz, Raúl
  • Rodríguez-Ramos, Reinaldo
  • Bravo-Castillejo, Julián
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] A hexagonal array of parallel circular cylinders embedded in a matrix is considered. The fibers are filled with a transversely isotropic (TI) elastic material whereas the matrix material is an ideal fluid. The asymptotic homogenization method, applied to a similar problem where the matrix is also a TI elastic material, produces formulae for the effective TI elastic composite. By a limit procedure when the shear modulii of matrix tend to zero, the formulae yield very simple expressions for the effective composite for the above problem, namely, it is a TI metafluid. The particular case of isotropic fibres leads to an isotropic metafluid. (C) 2019 Elsevier Ltd. All rights reserved., This work was sponsored by PAPIIT-DGAPA-UNAM IA100919. One of the authors (95) thanks to Universitat Politecnica de Valencia, Spain for providing facilities to carry out this work and DGAPA, UNAM for funding the visit. Another author (RR) is grateful for the financial support of Departamento de Maternaticas y Mecanica, IIMAS and PREI-DGAPA, UNAM. (JS-D) acknowledges the support by the Spanish Ministerio de Economia y Competitividad, and the European Union Fondo Europeo de Desarrollo Regional (FEDER) through Project No. TEC2014-53088-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Poisson-like effect for flexural waves in periodically perforated thin plates

  • Gao, Penglin
  • Wu, Linzhi
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] The Poisson-like effect, describing the redirection of waves by 90 degrees, is shown to be feasible for flexural waves propagating in perforated thin plates. It is demonstrated that the lowest order symmetric leaky guided mode (S0 mode) is responsible for the splitting of wave motion in two orthogonal directions. The S0 mode shows a feature of stationary waves containing standing wave modes in one and two orthogonal directions for smaller and larger holes, respectively. The former case is well understood thanks to the phenomenon of Wood's anomaly, which was first observed in optical gratings supposed to be transparent. On the contrary, the strong scattering caused by the larger holes leads to a mixed mode occurring when the incident wave is totally transmitted. The mixed mode easily couples with the incoming waves and, therefore, the Poisson-like effect activated under this mechanism is much stronger. Using the Poisson-like effect, a device is proposed in which about 82% of the incident mechanical energy is redirected to the perpendicular direction. Results obtained with arrays of free holes also apply to inclusions with parameters properly chosen. The findings may provide applications in beam splitting and waveguiding. (C) 2018 Acoustical Society of America., Work supported by the Ministerio de Economia y Competitividad of Spain and the EU Fondo Europeo de Desarrollo Regional under Project No. TEC2014-53088-C3-1-R, and the National Natural Science Foundation of China under Grants Nos. 11432004 and 11421091. P.G. acknowledges a scholarship with No. 201606120070 provided by China Scholarship Council.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Viscothermal Losses in Double-Negative Acoustic Metamaterials

  • Cutanda-Henriquez, V.
  • García Chocano, Víctor Manuel
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] The influence of losses in double-negative metamaterial slabs recently introduced by Graciá-Salgado et al. [Phys. Rev. B 88, 224305 (2013)] is comprehensively studied. Viscous and thermal losses are considered in the linearized Navier-Stokes equations with no flow. Despite the extremely low thicknesses of boundary layers associated with each type of losses, the double-negative behavior is totally suppressed for the rigid structures under analysis. In other words, almost 100% of the energy transmitted into the slab is dissipated by viscothermal effects, in agreement with experimental data. Simulations undertaken for larger structures, using scale factors of up to 20 times, show that double-negative behavior is never recovered. The huge dissipation obtained by these structures leads us to propose them as interesting alternatives to conventional absorbers for specific situations, e.g., when treating low frequencies or when the excitation is narrow banded., V. M. G.-C. and J. S.-D. acknowledge the support from the Spanish Ministerio de Economia y Competitividad (MINECO), and the European Union Fondo Europeo de Desarrollo Regional (FEDER) through Project No. TEC 2014-53088-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Redirection and Splitting of Sound Waves by a Periodic Chain of Thin Perforated Cylindrical Shells

  • Bozhko, Andrey
  • Krokhin, Arkadii
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Cervera Moreno, Francisco Salvador
[EN] The scattering of sound by finite and infinite chains of equally spaced perforated metallic cylindrical shells in an ideal (inviscid) and viscous fluid is theoretically studied using rigorous analytical and numerical approaches. Because of perforations, a chain of thin shells is practically transparent for sound within a wide range of frequencies. It is shown that strong scattering and redirection of sound by 90° may occur only for a discrete set of frequencies (Wood¿s anomalies) where the leaky eigenmodes are excited. The spectrum of eigenmodes consists of antisymmetric and symmetric branches with normal and anomalous dispersion, respectively. The antisymmetric eigenmode turns out to be a deaf mode, since it cannot be excited at normal incidence. However, at slightly oblique incidence, both modes can be resonantly excited at different but close frequencies. The symmetric mode, due to its anomalous dispersion, scatters sound in the ¿wrong¿ direction. This property may find an application for the splitting of the two resonant harmonics of the incoming signal into two beams propagating along the chain in the opposite directions. A chain of perforated cylinders may also be used as a passive antenna that detects the direction to the incoming signal by measuring the frequencies of the waves excited in the chain. Calculations are presented for aluminum shells in viscous air where the effects of anomalous scattering, redirection, and signal splitting are well manifested., A. K. acknowledges support from Programa de Apoyo a la Investigacion y Desarrollo (PAID-02-15) de la Universitat Politecnica de Valencia. A. B., F. C., and J. S.-D. acknowledge the support by the Ministerio de Economia y Competitividad of the Spanish government and the European Union Fondo Europeo de Desarrollo Regional (FEDER) through Project No. TEC2014-53088-C3-1-R. The authors are thankful to Michael R. Haberman for fruitful discussion regarding possible applications of the periodic chain of a perforated shell in the processing of acoustic signals.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Numerical modeling of double-negative acoustic metamaterials: Should losses be included?

  • Cutanda Henriquez, Vicente
  • Andersen, Peter Risby
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] Viscous and thermal losses of acoustic waves are usually neglected or accounted for as boundary impedance. It is known, however, that acoustic losses become relevant in devices with some dimension in the millimeter range or below. On the other hand, the new class of structures called acoustic metamaterials can be affected by acoustic losses, but in this case the extension of these effects is less known. Acoustic metamaterials are intricate periodic structures where, at frequencies low enough ( corresponding to wavelengths much l arger than the structure period), elementary units interact producing interesting unusual effects. In this paper advanced modeling tools based on the Boundary Element Method (BEM) and the Finite Element Method (FEM) are used to study the effect of losses in an acoustic metamaterial scaled to different sizes. The conclusions are expected to give insight on the practical limitations when using acoustic metamaterials, J. Sanchez-Dehesa acknowledges the support by the Spanish Ministerio de Economía y Competitividad, and the European Union Fondo Europeo de Desarrollo Regional (FEDER) through Project No. TEC2014-53088-C3-1-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Theoretical study of platonic crystals with periodically structured N-beam resonators

  • Gao, Penglin
  • Wu, Linzhi
  • Climente Alarcón, Alfonso
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] A multiple scattering theory is applied to study the properties of flexural waves propagating in a plate with periodically structured N-beam resonators. Each resonator consists of a circular hole containing an inner disk connected to background plate with N rectangular beams. The Bloch theorem is employed to obtain the band structure of a two-dimensional lattice containing a single resonator per unit cell. Also, a numerical algorithm has been developed to get the transmittance through resonator slabs infinitely long in the direction perpendicular to the incident wave. For the numerical validation, a square lattice of 2-beam resonators has been comprehensively analyzed. Its band structure exhibits several flat bands, indicating the existence of local resonances embedded in the structure. Particularly, the one featured as the fundamental mode of the inner disk opens a bandgap at low frequencies. This mode has been fully described in terms of a simple spring-mass model. As a practical application of the results obtained, a homogenization approach has been employed to design a focusing lens for flexural waves, where the index gradient is obtained by adjusting the orientation of the resonators beams. Numerical experiments performed within the framework of a three-dimensional finite element method have been employed to discuss the accuracy of the models described here. Published by AIP Publishing., This work was supported by the Ministerio de Economia y Competitividad of the Spanish government and the European Union Fondo Europeo de Desarrollo Regional (FEDER) through Project No. TEC2014-53088-C3-1-R, and the National Science Foundation of China under Grant No. 11432004. Penglin Gao acknowledges a scholarship with No. 201606120070 provided by China Scholarship Council.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Zero-phase propagation in realistic plate-type acoustic metamaterials

  • Malléjac, M.
  • Merkel, A.
  • Christensen, J.
  • Tournat, V.
  • Groby, Jean-Philippe
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] We theoretically, numerically, and experimentally analyze the Density-Near-Zero (DNZ) regime of a one-dimensional acoustic metamaterial. This acoustic metamaterial is composed of thin elastic plates periodically clamped in an air-filled waveguide, and the effective dynamic zero mass density is obtained from the strong dispersion around the bandgaps associated with the resonances of the plates. We emphasize the importance of the impedance mismatch between the acoustic metamaterial and the surrounding waveguide at the frequency of the zero effective density in addition to the consequences of the inherent losses. As a result, the frequency of the zero phase propagation, i.e., the acoustic propagation with zero phase delay, is not exactly the frequency of the zero density and lies in the frequency bandgap where the effective density is negative. Considering these limitations, the zero phase propagation is still experimentally observed and a subwavelength acoustic dipole is numerically designed, thus demonstrating the possible realistic implementations of DNZ acoustic metamaterials., This article is based upon work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology). This work was funded by the Metaroom Project No. ANR-18-CE08-0021 and co-funded by ANR and RCG. J. Christensen acknowledges the support from the MINECO through a Ramon y Cajal grant (Grant No. RYC-2015-17156). J. Sanchez-Dehesa acknowledges the support from the Ministerio de Economia y Competitividad of the Spanish government and the European Union Fondo Europeo de Desarrollo Regional (FEDER) through Project No. TEC2014-53088-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Acoustic cloak based on Bézier scatterers

  • Lu, Zhimiao
  • Sanchis Martínez, Lorenzo
  • Wen, Jihong
  • Cai, Li
  • Bi, Yafeng
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] Among the different approaches proposed to design acoustic cloaks, the one consisting on the use of an optimum distribution of discrete scatters surrounding the concealing object has been successfully tested. The feasibility of acoustic cloaks mainly depends on the number and shape of the scatterers surrounding the object to be cloaked. This work presents a method allowing the reduction of the number of discrete scatterers by optimizing their external shape, which is here defined by a combination of cubic Bézier curves. Based on scattering cancellation, a two-dimensional directional cloak consisting of just 20 Bézier scatters has been designed, fabricated and experimentally characterized. The method of fundamental solutions has been implemented to calculate the interaction of an incident plane wave with scatterers of arbitrary shape. The acoustic cloak here proposed shows a performance, in terms of averaged visibility, similar to that consisting of 120 scatterers with equal circular cross sections. The operational frequency of the proposed cloak is 5940 Hz with a bandwidth of about 110 Hz., J. Sanchez-Dehesa acknowledges the financial support by the Spanish Ministerio de Economia y Competitividad and the European Union Fondo Europeo para el Desarrollo Regional (FEDER) under Grant with Ref. TEC2014-53088-C3-1-R. Lu Zhimiao acknowledges the financial support from the program of China Scholarships Council (No. 201503170282), Wen Jihong, Cai Li and Lu Zhimiao acknowledge the support by National Natural Science Foundation of China (Grant Nos 51275519 and 11372346)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Aerogel-based metasurfaces for perfect acoustic energy absorption

  • Fernandez-Marin, Antonio A.
  • Groby, Jean-Philippe
  • Jimenez, Noe|||0000-0002-6539-670X
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] The unusual viscoelastic properties of silica aerogel plates are efficiently used to design subwavelength perfect sound absorbers. We theoretically, numerically and experimentally report a perfect absorbing metamaterial panel made of periodically arranged resonant building blocks consisting of a slit loaded by a clamped aerogel plate backed by a closed cavity. The impedance matching condition is analyzed using the Argand diagram of the reflection coefficient, i.e., the trajectory of the reflection coefficient as a function of frequency in the complex plane. The lack or excess of losses in the system can be identified via this Argrand diagram in order to achieve the impedance matching condition. The universality of this tool can be further exploited to design more complex metasurfaces for perfect sound absorption, thus allowing the rapid design of novel and efficient absorbing metamaterials., This work was funded by the RFI Le Mans Acoustique, Region Pays de la Loire. This article is based upon work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology). N.J. acknowledges financial support from Generalitat Valenciana through Grant No. APOSTD/2017/042. J.-P.G and V.R.G. gratefully acknowledge the ANR-RGC METARoom (No. ANR-18-CE08-0021) project and the HYPERMETA project funded under the program Etoiles Montantes of the Region Pays de la Loire. J.S-D. acknowledges the support of the Ministerio de Economia y Competitividad of the Spanish government and the European Union FEDER through Project No. TEC2014-53088-C3-1-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental evidence of rainbow trapping and Bloch oscillations of torsional waves in chirped metallic beams

  • Arreola-Lucas, Arturo
  • Baez, Gabriela
  • Mendez-Sanchez, R.A.
  • Cervera Moreno, Francisco Salvador
  • Climente Alarcón, Alfonso
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] The Bloch oscillations (BO) and the rainbow trapping (RT) are two apparently unrelated phenomena, the former arising in solid state physics and the latter in metamaterials. A Bloch oscillation, on the one hand, is a counter-intuitive effect in which electrons start to oscillate in a crystalline structure when a static electric field is applied. This effect has been observed not only in solid state physics but also in optical and acoustical structured systems since a static electric field can be mimicked by a chirped structure. The RT, on the other hand, is a phenomenon in which the speed of a wave packet is slowed down in a dielectric structure; different colors then arrive to different depths within the structure thus separating the colors also in time. Here we show experimentally the emergence of both phenomena studying the propagation of torsional waves in chirped metallic beams. Experiments are performed in three aluminum beams in which different structures were machined: one periodic and two chirped. For the smaller value of the chirping parameter the wave packets, with different central frequencies, are back-scattered at different positions inside the corrugated beam; the packets with higher central frequencies being the ones with larger penetration depths. This behavior represents the mechanical analogue of the rainbow trapping effect. This phenomenon is the precursor of the mechanical Bloch oscillations, which are here demonstrated for a larger value of the chirping parameter. It is observed that the oscillatory behavior observed at small values of the chirp parameter is rectified according to the penetration length of the wave packet., Work partially supported by DGAPA-UNAM under projects PAPIIT IN103115 and IN109318 and by CONACYT project 284096. A.A.L. acknowledges CONACYT for the support granted to pursue his Ph.D. studies. G. Baez received CONACYT's financial support. RAMS received support from DGAPA-UNAM under program PASPA. We thank M. Martinez, A. Martinez, V. Dominguez-Rocha, E. Flores and E. Sadurni for invaluable comments. F.C., A.C. and J.S-D. acknowledge the support by the Ministerio de Economa y Competitividad of the Spanish government, and the European Union FEDER through project TEC2014-53088-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of flexural wave cloaks

  • Climente Alarcón, Alfonso
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Torrent Martí, Daniel
This work presents a comprehensive study of the cloak for bending waves theoretically proposed by Farhat et al. [see Phys. Rev. Lett. 103, 024301 (2009)] and later on experimentally realized by Stenger et al. [see Phys. Rev. Lett. 108, 014301 (2012)]. This study uses a semi-analytical approach, the multilayer scattering method, which is based in the Kirchoff-Love wave equation for flexural waves in thin plates. Our approach was unable to reproduce the predicted behavior of the theoretically proposed cloak. This disagreement is here explained in terms of the simplified wave equation employed in the cloak design, which employed unusual boundary conditions for the cloaking shell. However, our approach reproduces fairly well the measured displacement maps for the fabricated cloak, indicating the validity of our approach. Also, the cloak quality has been here analyzed using the so called averaged visibility and the scattering cross section. The results obtained from both analysis let us to conclude that there is room for further improvements of this type of flexural wave cloak by using better design procedures. (C) 2016 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/)., This work has been supported by the Spanish Ministerio de Economia y Competitividad and the European Union Fondo Europeo para el Desarrollo Regional (FEDER) under Grant with Ref. TEC2014-53088-C3-1-R. We gratefully acknowledge Nicolas Stenger for providing us the parameters listed in Table I.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the origin of pure optical rotation in twisted-cross metamaterials

  • Barr, Lauren E.
  • Tremain, Ben
  • Carbonell Olivares, Jorge
  • Hendry, Euan
  • Hibbins, Alastair P.
  • Diaz Rubio, Ana|||0000-0002-0115-1834
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
We present an experimental and computational study of the response of twisted-cross metamaterials that provide near dispersionless optical rotation across a broad band of frequencies from 19 GHz to 37 GHz. We compare two distinct geometries: firstly, a bilayer structure comprised of arrays of metallic crosses where the crosses in the second layer are twisted about the layer normal; and secondly where the second layer is replaced by the complementary to the original, i.e. an array of cross-shaped holes. Through numerical modelling we determine the origin of rotatory effects in these two structures. In both, pure optical rotation occurs in a frequency band between two transmission minima, where alignment of electric and magnetic dipole moments occurs. In the cross/cross metamaterial, the transmission minima occur at the symmetric and antisymmetric resonances of the coupled crosses. By contrast, in the cross/complementary-cross structure the transmission minima are associated with the dipole and quadrupole modes of the cross, the frequencies of which appear intrinsic to the cross layer alone. Hence the bandwidth of optical rotation is found to be relatively independent of layer separation., The authors wish to thank Dr. Simon Horsley and Prof. Roy Sambles for their helpful discussions. A.D.-R., J.C. and J.S.-D. acknowledge the support by the Ministerio de Economica y Competitividad of the Spanish government, and the European Union FEDER through project TEC2014-53088-C3-1-R. L.E.B. and A.P.H. acknowledge financial support from the Engineering and Physical Sciences Research Council (EPSRC) of the United Kingdom, via the EPSRC Centre for Doctoral Training in Electromagnetic Metamaterials (Grant No. EP/L015331/1). E.H. wishes to acknowledge support from the EPSRC (Grant No. EP/K041215/1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Majorana-like Zero Modes in Kekule Distorted Sonic Lattices

  • Gao, Penglin
  • Torrent Martí, Daniel
  • San-Jose, Pablo
  • Christensen, Johan
  • Cervera Moreno, Francisco Salvador
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] Topological phases have recently been realized in bosonic systems. The associated boundary modes between regions of distinct topology have been used to demonstrate robust waveguiding, protected from defects by the topology of the surrounding bulk. A related type of topologically protected state that is not propagating but is bound to a defect has not been demonstrated to date in a bosonic setting. Here we demonstrate numerically and experimentally that an acoustic mode can be topologically bound to a vortex fabricated in a two-dimensional, Kekul¿e-distorted triangular acoustic lattice. Such lattice realizes an acoustic analog of the Jackiw-Rossi mechanism that topologically binds a bound state in a p-wave superconductor vortex. The acoustic bound state is thus a bosonic analog of a Majorana bound state, where the two valleys replace particle and hole components. We numerically show that it is topologically protected against arbitrary symmetry-preserving local perturbations, and remains pinned to the Dirac frequency of the unperturbed lattice regardless of parameter variations. We demonstrate our prediction experimentally by 3D printing the vortex pattern in a plastic matrix and measuring the spectrum of the acoustic response of the device. Despite viscothermal losses, the measured topological resonance remains robust, with its frequency closely matching our simulations., J. C. acknowledges support from the European Research Council (ERC) through the Starting Grant No. 714577 PHONOMETA and from the MINECO through a Ramon y Cajal grant (No. RYC-2015-17156). J. S.-D. acknowledges support from the Ministerio de Economia y Competitividad of the Spanish Government and the European Union "Fondo Europeo de Desarrollo Regional (FEDER)" through Project No. TEC2014-53088-C3-1-R. P. S.-J. acknowledges support from MINECO/FEDER under Grant No. FIS2015-65706-P. D. T. acknowledges financial support through the Ramon y Cajal fellowship under Grant No. RYC-2016-21188 and to the Ministry of Science, Innovation and Universities through Project No. RTI2018-093921-A-C42.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nonlocal electrodinamics of homogenized metal-dielectric photonic crystals

  • Konovalenko, Anatolii
  • Reyes-Avendaño, Jorge A.
  • Méndez-Blas, Antonio
  • Myslivets, Evgeny
  • Radic, Stojan
  • Pérez-Rodríguez, Felipe
  • Cervera Moreno, Francisco Salvador
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] The nonlocal effective permittivity tensor for photonic crystals (PCs), having dielectric and metallic inclusions in the unit cell, is calculated and analyzed within the homogenization theory based on the Fourier formalism and the form-factor division approach. A method allowing us to extract the effective bianisotropic metamaterial parameters (permeability and chirality) from the wave vector dependence of the nonlocal effective dielectric response is proposed. Both the original nonlocal dielectric response parameters and the new bianisotropic metamaterial ones reproduce the photonic band structure of the artificial crystal far beyond the long wavelength limit and for a wide class of metal-dielectric structures. To calculate the optical spectra (reflection and transmission) of finite-size PC, the nonlocal homogenization approach is extended with the method of expansion into photonic bulk-modes (Bloch waves). The application of the developed theory is illustrated with well-known forms of metallic inclusions (slabs, thin wires, split-ring resonators) and experimentally confirmed with novel designs based on metallic crosses., This work was partially supported by Red-PRODEP, PRO-FOCIE, CONACYT (Grant No. CB-2011-01-166382), and VIEP-BUAP. Experimental measurements were carried out with support of Wave Phenomena Group of Universitat Politecnica de Valencia and Photonics Group of University of California San Diego. F C and J S-D acknowledge the financial support by the Ministerio de Economia y Competitividad of the Spanish government and the European Union Fondo Europeo de Desarrollo Regional (FEDER) (Grant No. TEC2014-53088-C3-1-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Numerical Model of an Acoustic Metamaterial Using the Boundary Element Method Including Viscous and Thermal Losses

  • Cutanda-Henriquez, V.
  • Andersen, Peter Risby
  • Jensen, J. Sondergaard
  • Juhl, P. Moller
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] In recent years, boundary element method (BEM) and finite element method (FEM) implementations of acoustics in fluids with viscous and thermal losses have been developed. They are based on the linearized Navier¿Stokes equations with no flow. In this paper, such models with acoustic losses are applied to an acoustic metamaterial. Metamaterials are structures formed by smaller, usually periodic, units showing remarkable physical properties when observed as a whole. Acoustic losses are relevant in metamaterials in the millimeter scale. In addition, their geometry is intricate and challenging for numerical implementation. The results are compared with existing measurements., The authors wish to thank Mads J. Herring Jensen, from the company COMSOL, for his support in setting up the FEM model of the metamaterial. J. Sanchez-Dehesa acknowledges the support by the Spanish Ministerio de Economia y Competitividad, and the European Union Fondo Europeo de Desarrollo Regional (FEDER) through Project No. TEC2014-53088-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Single-phase metamaterial plates for broadband vibration suppression at low frequencies

  • Gao, Penglin
  • Wu, Linzhi
  • Climente Alarcón, Alfonso
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] By studying platonic crystals based on lattices of cavities containing N-beam resonators, we conclude that crystals made of 1-beam resonators easily produce low-frequency omnidirectional bandgaps. Based on this favorable property, hardly obtained for resonant cavities containing a higher number of beams N >= 2, we have designed single-phase metamaterial plates for the suppression of low frequency flexural waves in a broad range of frequencies. These metamaterials are obtained by using resonant cavities containing a multiple number M of identical 1-beam resonators uniformly distributed in the cavity. Square lattices of this type of resonators have been studied by using the impedance matrix approach and the multiple scattering method. This semi-analytical method has been employed to show the existence of complete bandgaps whose width can be optimized by increasing M. For the case M = 4, the largest number of resonators studied here, three complete bandgaps separated by two narrow passbands appear in the band structure. The formation of these complete bandgaps originates from the dynamic interaction between different local resonators as well as their interaction with the propagating waves in the host plate. By using composite structures consisting of platonic crystal slabs with complementary bandgaps, these separated bandgaps easily merge into a broadband wave attenuation region. The normalized width, defined as the percentage of the bandwidth to its central frequency, reaches 95.3%, representing an enhancement of about one order of magnitude compared with the absolute bandwidth obtained for the case of a single 1-beam resonator in the cavity. It is shown that the gaps can be easily tuned to lower frequencies by changing the geometrical parameters, such as the length of the beam, the radius and thickness of the smaller circular plate. Since the metamaterial is made of a single-phase material without attaching heavy masses, the work reported here provides a simple approach to construct low-cost structures with potential applications in aeronautic and astronautic industries for broadband vibration suppression at low frequencies. (C) 2018 Published by Elsevier Ltd., This work was supported by the Ministerio de Economia y Competitividad of the Spanish government and the European Union Fondo Europeo de Desarrollo Regional (FEDER) [Grant No. TEC2014-53088-C3-1-R], and the National Natural Science Foundation of China [Grant Nos. 11432004 and 11421091]. Penglin Gao acknowledges a scholarship provided by China Scholarship Council [Grant No. 201606120070].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Aerogel as a Soft Acoustic Metamaterial for Airborne Sound

  • Guild, Matthew
  • García Chocano, Víctor Manuel
  • Martin, Theodore P.
  • Calvo, David C.
  • Orris, Gregory J.
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
Soft acoustic metamaterials utilizing mesoporous structures have been proposed recently as a means for tuning the overall effective properties of the metamaterial and providing better coupling to the surrounding air. In this paper, the use of silica aerogel is examined theoretically and experimentally as part of a compact soft acoustic metamaterial structure, which enables a wide range of exotic effective macroscopic properties to be demonstrated, including negative density, density near zero, and nonresonant broadband slow-sound propagation. Experimental data are obtained on the effective density and sound speed using an air-filled acoustic impedance tube for flexural metamaterial elements, which have been investigated previously only indirectly due to the large contrast in acoustic impedance compared to that of air. Experimental results are presented for silica aerogel arranged in parallel with either one or two acoustic ports and are in very good agreement with the theoretical model., This work is supported by the U.S. Office of Naval Research. M. D. G., V. M. G.-C. and J. S.-D. also acknowledge the support by the Spanish Ministerio de Economia y Competitividad, and the European Union Fondo Europeo de Desarrollo Regional (FEDER) through Project No. TEC2014-53088-C3-1-R. The authors wish to acknowledge Encarna G. Villora and Kiyoshi Shimamura for their help in aerogel fabrication and handling.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Majorana-like Zero Modes in Kekulé Distorted Sonic Lattices

  • Gao, Penglin
  • Torrent, Daniel
  • Cervera, Francisco
  • San-José, Pablo
  • Sánchez Dehesa, José
  • Christensen, Johan
[EN] Topological phases have recently been realized in bosonic systems. The associated boundary modes between regions of distinct topology have been used to demonstrate robust waveguiding, protected from defects by the topology of the surrounding bulk. A related type of topologically protected state that is not propagating but is bound to a defect has not been demonstrated to date in a bosonic setting. Here we demonstrate numerically and experimentally that an acoustic mode can be topologically bound to a vortex fabricated in a two-dimensional, Kekulé-distorted triangular acoustic lattice. Such lattice realizes an acoustic analog of the Jackiw-Rossi mechanism that topologically binds a bound state in a p-wave superconductor vortex. The acoustic bound state is thus a bosonic analog of a Majorana bound state, where the two valleys replace particle and hole components. We numerically show that it is topologically protected against arbitrary symmetry-preserving local perturbations, and remains pinned to the Dirac frequency of the unperturbed lattice regardless of parameter variations. We demonstrate our prediction experimentally by 3D printing the vortex pattern in a plastic matrix and measuring the spectrum of the acoustic response of the device. Despite viscothermal losses, the measured topological resonance remains robust, with its frequency closely matching our simulations., J. C. acknowledges support from the European Research Council (ERC) through the Starting Grant No. 714577 PHONOMETA and from the MINECO through a Ramón y Cajal grant (No. RYC-2015-17156). J. S.-D. acknowledges support from the Ministerio de Economía y Competitividad of the Spanish Government and the European Union “Fondo Europeo de Desarrollo Regional (FEDER)” through Project No. TEC2014-53088-C3-1-R. P. S.-J. acknowledges support from MINECO/FEDER under Grant No. FIS2015-65706-P. D. T. acknowledges financial support through the Ramón y Cajal fellowship under Grant No. RYC-2016-21188 and to the Ministry of Science, Innovation and Universities through Project No. RTI2018- 093921-A-C42.