Skip to main content

ARQUITECTURA SOFTWARE PARA CONTROL DE TASA EN REDES INTEGRADAS SATELITE-TERRESTRE

TEC2015-70197-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

New privacy practices for blockchain software

  • Bellés Muñoz, Marta
  • Baylina Melé, Jordi
  • Daza Fernández, Vanesa
  • Muñoz Tapia, José Luis|||0000-0001-6442-437X
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The benefits of blockchain technologies for industrial applications are unquestionable. However, it is a considerable challenge to use a transparent system like blockchain and at the same time provide privacy to sensitive data. Privacy technologies permit conducting private transactions about sensitive data over transparent networks, but their inherent complexity has been overwhelming for many developers. Closing the gap between developers and privacy-preserving technologies would help to the full adoption of the privacy by design framework for blockchain software. To this end, in this paper we present the software tools we have implemented to bring complex privacy technologies closer to developers and facilitate the job of implementing privacy-enabled blockchain applications., This research is supported by the Ethereum Foundation Ecosystem Support [9], TCO-RISEBLOCK (PID2019-110224RB-I00), H2020-i3-MARKET, ARPASAT (TEC2015-70197-R), 2014-SGR-1504, RTI2018-102112-B-I00 (AEI/FEDER,UE) and H2020 PRESENT (856879)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Invoice factoring registration based on a public blockchain

  • Mohammadzadeh, Nasibeh|||0000-0001-5950-0964
  • Nogoorani, Sadegh Dorri
  • Muñoz Tapia, José Luis|||0000-0001-6442-437X
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Invoice factoring is a very useful tool for developing businesses that face liquidity problems. The main property that a factoring system needs to fulfill is to prevent an invoice from being factored twice. In order to prevent double factoring, many factoring ecosystems use one or several centralized entities to register factoring agreements. However, this puts a lot of power in the hands of these centralized entities and makes it difficult for users to dispute situations in which factoring data is unavailable, wrongly recorded or manipulated by negligence or on purpose. In this article, we propose an architecture for invoice factoring registration based on a public blockchain. To solve the aforementioned drawbacks, we replace the trusted third parties for factoring registration with a smart contract. Using a smart contract, we record digital evidence of the terms and conditions of factoring agreements in explicit detail, allowing auditability and dispute resolution. Relevant information is highly available on the blockchain while its privacy is protected. The registration is optimal, since it needs only one blockchain transaction and one key-value storage per invoice factoring., This work was supported in part by the TCO-RISEBLOCK under Grant PID2019-110224RB-I00, in part by the H2020-i3-MARKET, and in part by the ARPASAT under Grant TEC2015-70197-R and Grant 2014-SGR-1504, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

An architecture for easy onboarding and key life-cycle management in blockchain applications

  • Genés Durán, Rafael|||0000-0003-2456-2625
  • Yarlequé Ruesta, Diana
  • Bellés Muñoz, Marta
  • Jimenez Viguer, Antonio
  • Muñoz Tapia, José Luis|||0000-0001-6442-437X
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., New manufacturing paradigms require a large number of business interactions between multiple cyber-physical systems with different owners. In this context, public distributed ledgers are disruptive because they make it possible to securely and publicly record proofs of agreements between parties that do not necessarily trust each other. Many industry leaders have already achieved significant business benefits using this technology, including greater transparency, improved traceability, enhanced security, increased transaction speed and costs reduction. While the benefits of blockchain technologies for industrial applications are unquestionable, these technologies have an inherent complexity that might be overwhelming for many users. To decrease entry barriers for industry users to distributed ledger technologies, it is necessary to have an easy user onboarding process and a simple key life-cycle management. In this paper, we propose an architecture that facilitates these processes and simplifies how users utilize decentralized applications without sacrificing on the expected security. To achieve this goal, our architecture uses a middleware that allows us to decouple the digital signatures required for paying blockchain fees from the ones required for authorization. This approach has the advantage that users are not forced to create wallets, buy cryptocurrency, or protect their private keys. For these reasons, our solution is a promising way of enabling a reasonable transition to the integration of distributed ledger technologies in industrial business processes.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

DEFS - Data exchange with Free Sample Protocol

  • Genés Durán, Rafael|||0000-0003-2456-2625
  • Hernández Serrano, Juan|||0000-0001-5225-7404
  • Esparza Martín, Óscar|||0000-0002-2593-0162
  • Bellés Muñoz, Marta
  • Muñoz Tapia, José Luis|||0000-0001-6442-437X
Distrust between data providers and data consumers is one of the main obstacles hampering digital-data commerce to take off. Data providers want to get paid for what they offer, while data consumers want to know exactly what are they paying for before actually paying for it. In this article, we present a protocol that overcomes this obstacle by building trust based on two main ideas. First, a probabilistic verification protocol, where some random samples of the real dataset are shown to buyers in order to allow them to make an assessment before committing any payment; and second a guaranteed, protected payment process, enforced with smart contracts on a public blockchain, that guarantees the payment of the data if and only if the data provided meets the agreed terms, and that refunds honest players otherwise., The architecture presented in this paper is supported and developed in the context of the i3-MARKET project [?]. The i3-MARKET project is an active European H2020 project focused on developing solutions for building an European data market economy by enhancing current marketplace platforms with innovative technologies (call H2020-ICT-2019-2 with grant agreement number 871754). This work is also supported by the TCO-RISEBLOCK (PID2019-110224RBI00), MINECO/FEDER funded project ARPASAT TEC2015-70197-R and by the Generalitat de Catalunya grant 2014-SGR-1504.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A protocol for data exchange with free samples using smart contracts

  • Genés Durán, Rafael|||0000-0003-2456-2625
  • Hernández Serrano, Juan|||0000-0001-5225-7404
  • Esparza Martín, Óscar|||0000-0002-2593-0162
  • Soriano Ibáñez, Miguel|||0000-0003-0457-8531
  • Muñoz Tapia, José Luis|||0000-0001-6442-437X
  • Bellés Muñoz, Marta
Distrust between data providers and data consumers is one of the main obstacles hampering digitaldata commerce to take off. Data providers want to get paid for what they offer, while data consumers want to know exactly what are they paying for before actually paying for it. In this paper, we summarize a protocol that overcomes this obstacle by building trust based on two main ideas. First, a probabilistic verification protocol, where some random samples of the real dataset are shown to buyers in order to allow them to make an assessment before committing any payment; and second a guaranteed, protected payment process, enforced with smart contracts on a public blockchain, that guarantees the payment of the data if and only if the data provided meets the agreed terms, and that refunds honest players otherwise., This research has been funded by i3Market (H2020- ICT-2019-2 grant number 871754). This work is also supported by the TCO-RISEBLOCK (PID2019-110224RBI00), ARPASAT (TEC2015-70197-R), Project RTI2018- 102112-B-I00 (AEI/FEDER,UE) and by the Generalitat de Catalunya grant 2014-SGR-1504
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Privacy risk analysis in the IoT domain

  • Hernández Serrano, Juan|||0000-0001-5225-7404
  • Muñoz Tapia, José Luis|||0000-0001-6442-437X
  • León Abarca, Olga|||0000-0003-2869-051X
  • Mikkelsen, Lars
  • Schwefel, Hans-Peter
  • Bröring, Arne
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Most IoT systems are using or exchanging user related information between system components. This means that privacy is a key factor in these systems. Privacy, both in terms of not allowing unauthorized access to information, but also in terms of handling sensitive information correctly and responsibly. As IoT systems typically are comprised of many software and hardware distributed components, ensuring privacy is a challenging task. This paper proposes a risk rating methodology for identifying and rating privacy risks, and demonstrates how to apply this methodology in an IoT use case set in the context of the EU H2020 BIG IoT project. It is also demonstrated how to handle the results of the risk rating methodology.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Decentralized factoring for self-sovereign identities

  • Mohammadzadeh, Nasibeh|||0000-0001-5950-0964
  • Nogoorani, Sadegh Dorri
  • Muñoz Tapia, José Luis|||0000-0001-6442-437X
Invoice factoring is a handy tool for developing businesses that face liq- uidity problems. The main property that a factoring system needs to fulfill is to prevent an invoice from being factored twice. Distributed ledger tech- nology is suitable for implementing the platform to register invoice factor- ing agreements and prevent double-factoring. Several works have been proposed to use this technology for invoice factoring. However, current proposals lack in one or several aspects such as decentralization and secu- rity against corruption, protecting business and personally identifiable in- formation (PII), providing non-repudiation for handling disputes, Know- Your-Customer (KYC) compliance, easy user on-boarding, and being cost- efficient. In this article, a factoring registration protocol is proposed for invoice factoring registration based on a public distributed ledger which adheres to the before-mentioned requirements. We include a relayer in our architecture to address the entry barrier that the users have due to the need of managing cryptocurrencies for interacting with the public ledger. Moreover, we leverage the concept of Verifiable Credentials (VCs) for KYC compliance, and allow parties to implement their self-sovereign identities by using decentralized identifiers (DIDs). DIDs enable us to relay on the DIDComm protocol for asynchronous and secure off-chain communica- tions. We analyze our protocol from several security aspects, compare it to the related work, and study a possible business use case. Our evalu- ations demonstrate that our proposal is secure and efficient, and covers requirements not addressed by existing related work., This research has been funded by i3Market (H2020-ICT-2019-2 grant number 871754). This work is also supported by the TCO-RISEBLOCK (PID2019-110224RB-I00), ARPASAT (TEC2015- 70197-R), and by the Generalitat de Catalunya grant 2014-SGR-1504., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

New privacy practices for blockchain software

  • Bellés Muñoz, Marta
  • Baylina Melé, Jordi
  • Daza Fernández, Vanesa
  • Muñoz Tapia, José Luis
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The benefits of blockchain technologies for industrial applications are unquestionable. However, it is a considerable challenge to use a transparent system like blockchain and at the same time provide privacy to sensitive data. Privacy technologies permit conducting private transactions about sensitive data over transparent networks, but their inherent complexity has been overwhelming for many developers. Closing the gap between developers and privacy-preserving technologies would help to the full adoption of the privacy by design framework for blockchain software. To this end, in this paper we present the software tools we have implemented to bring complex privacy technologies closer to developers and facilitate the job of implementing privacy-enabled blockchain applications., This research is supported by the Ethereum Foundation Ecosystem Support [9], TCO-RISEBLOCK (PID2019-110224RB-I00), H2020-i3-MARKET, ARPASAT (TEC2015-70197-R), 2014-SGR-1504, RTI2018-102112-B-I00 (AEI/FEDER,UE) and H2020 PRESENT (856879)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Privacy risk analysis in the IoT domain

  • Hernández Serrano, Juan
  • Muñoz Tapia, José Luis
  • León Abarca, Olga
  • Mikkelsen, Lars
  • Schwefel, Hans-Peter
  • Bröring, Arne
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Most IoT systems are using or exchanging user related information between system components. This means that privacy is a key factor in these systems. Privacy, both in terms of not allowing unauthorized access to information, but also in terms of handling sensitive information correctly and responsibly. As IoT systems typically are comprised of many software and hardware distributed components, ensuring privacy is a challenging task. This paper proposes a risk rating methodology for identifying and rating privacy risks, and demonstrates how to apply this methodology in an IoT use case set in the context of the EU H2020 BIG IoT project. It is also demonstrated how to handle the results of the risk rating methodology., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

An architecture for easy onboarding and key life-cycle management in blockchain applications

  • Genés Durán, Rafael
  • Yarlequé Ruesta, Diana
  • Bellés Muñoz, Marta
  • Jimenez Viguer, Antonio
  • Muñoz Tapia, José Luis
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., New manufacturing paradigms require a large number of business interactions between multiple cyber-physical systems with different owners. In this context, public distributed ledgers are disruptive because they make it possible to securely and publicly record proofs of agreements between parties that do not necessarily trust each other. Many industry leaders have already achieved significant business benefits using this technology, including greater transparency, improved traceability, enhanced security, increased transaction speed and costs reduction. While the benefits of blockchain technologies for industrial applications are unquestionable, these technologies have an inherent complexity that might be overwhelming for many users. To decrease entry barriers for industry users to distributed ledger technologies, it is necessary to have an easy user onboarding process and a simple key life-cycle management. In this paper, we propose an architecture that facilitates these processes and simplifies how users utilize decentralized applications without sacrificing on the expected security. To achieve this goal, our architecture uses a middleware that allows us to decouple the digital signatures required for paying blockchain fees from the ones required for authorization. This approach has the advantage that users are not forced to create wallets, buy cryptocurrency, or protect their private keys. For these reasons, our solution is a promising way of enabling a reasonable transition to the integration of distributed ledger technologies in industrial business processes., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A protocol for data exchange with free samples using smart contracts

  • Genés Durán, Rafael
  • Hernández Serrano, Juan
  • Esparza Martín, Óscar
  • Soriano Ibáñez, Miguel
  • Muñoz Tapia, José Luis
  • Bellés Muñoz, Marta
Distrust between data providers and data consumers is one of the main obstacles hampering digitaldata commerce to take off. Data providers want to get paid for what they offer, while data consumers want to know exactly what are they paying for before actually paying for it. In this paper, we summarize a protocol that overcomes this obstacle by building trust based on two main ideas. First, a probabilistic verification protocol, where some random samples of the real dataset are shown to buyers in order to allow them to make an assessment before committing any payment; and second a guaranteed, protected payment process, enforced with smart contracts on a public blockchain, that guarantees the payment of the data if and only if the data provided meets the agreed terms, and that refunds honest players otherwise., This research has been funded by i3Market (H2020- ICT-2019-2 grant number 871754). This work is also supported by the TCO-RISEBLOCK (PID2019-110224RBI00), ARPASAT (TEC2015-70197-R), Project RTI2018- 102112-B-I00 (AEI/FEDER,UE) and by the Generalitat de Catalunya grant 2014-SGR-1504, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Invoice factoring registration based on a public blockchain

  • Mohammadzadeh, Nasibeh
  • Nogoorani, Sadegh Dorri
  • Muñoz Tapia, José Luis
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Invoice factoring is a very useful tool for developing businesses that face liquidity problems. The main property that a factoring system needs to fulfill is to prevent an invoice from being factored twice. In order to prevent double factoring, many factoring ecosystems use one or several centralized entities to register factoring agreements. However, this puts a lot of power in the hands of these centralized entities and makes it difficult for users to dispute situations in which factoring data is unavailable, wrongly recorded or manipulated by negligence or on purpose. In this article, we propose an architecture for invoice factoring registration based on a public blockchain. To solve the aforementioned drawbacks, we replace the trusted third parties for factoring registration with a smart contract. Using a smart contract, we record digital evidence of the terms and conditions of factoring agreements in explicit detail, allowing auditability and dispute resolution. Relevant information is highly available on the blockchain while its privacy is protected. The registration is optimal, since it needs only one blockchain transaction and one key-value storage per invoice factoring., This work was supported in part by the TCO-RISEBLOCK under Grant PID2019-110224RB-I00, in part by the H2020-i3-MARKET, and in part by the ARPASAT under Grant TEC2015-70197-R and Grant 2014-SGR-1504, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

DEFS - Data exchange with Free Sample Protocol

  • Genés Durán, Rafael
  • Hernández Serrano, Juan
  • Esparza Martín, Óscar
  • Bellés Muñoz, Marta
  • Muñoz Tapia, José Luis
Distrust between data providers and data consumers is one of the main obstacles hampering digital-data commerce to take off. Data providers want to get paid for what they offer, while data consumers want to know exactly what are they paying for before actually paying for it. In this article, we present a protocol that overcomes this obstacle by building trust based on two main ideas. First, a probabilistic verification protocol, where some random samples of the real dataset are shown to buyers in order to allow them to make an assessment before committing any payment; and second a guaranteed, protected payment process, enforced with smart contracts on a public blockchain, that guarantees the payment of the data if and only if the data provided meets the agreed terms, and that refunds honest players otherwise., The architecture presented in this paper is supported and developed in the context of the i3-MARKET project [?]. The i3-MARKET project is an active European H2020 project focused on developing solutions for building an European data market economy by enhancing current marketplace platforms with innovative technologies (call H2020-ICT-2019-2 with grant agreement number 871754). This work is also supported by the TCO-RISEBLOCK (PID2019-110224RBI00), MINECO/FEDER funded project ARPASAT TEC2015-70197-R and by the Generalitat de Catalunya grant 2014-SGR-1504., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Decentralized factoring for self-sovereign identities

  • Mohammadzadeh, Nasibeh
  • Nogoorani, Sadegh Dorri
  • Muñoz Tapia, José Luis
Invoice factoring is a handy tool for developing businesses that face liq- uidity problems. The main property that a factoring system needs to fulfill is to prevent an invoice from being factored twice. Distributed ledger tech- nology is suitable for implementing the platform to register invoice factor- ing agreements and prevent double-factoring. Several works have been proposed to use this technology for invoice factoring. However, current proposals lack in one or several aspects such as decentralization and secu- rity against corruption, protecting business and personally identifiable in- formation (PII), providing non-repudiation for handling disputes, Know- Your-Customer (KYC) compliance, easy user on-boarding, and being cost- efficient. In this article, a factoring registration protocol is proposed for invoice factoring registration based on a public distributed ledger which adheres to the before-mentioned requirements. We include a relayer in our architecture to address the entry barrier that the users have due to the need of managing cryptocurrencies for interacting with the public ledger. Moreover, we leverage the concept of Verifiable Credentials (VCs) for KYC compliance, and allow parties to implement their self-sovereign identities by using decentralized identifiers (DIDs). DIDs enable us to relay on the DIDComm protocol for asynchronous and secure off-chain communica- tions. We analyze our protocol from several security aspects, compare it to the related work, and study a possible business use case. Our evalu- ations demonstrate that our proposal is secure and efficient, and covers requirements not addressed by existing related work., This research has been funded by i3Market (H2020-ICT-2019-2 grant number 871754). This work is also supported by the TCO-RISEBLOCK (PID2019-110224RB-I00), ARPASAT (TEC2015- 70197-R), and by the Generalitat de Catalunya grant 2014-SGR-1504., Peer Reviewed, Postprint (published version)