Skip to main content

ELASTIC NETWORKS: NUEVOS PARADIGMAS DE REDES ELASTICAS PARA UN MUNDO RADICALMENTE BASADO EN CLOUD Y FOG COMPUTING

TEC2015-71932-REDT

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Redes Investigación /Redes Excelencia
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Investigación, Desarrollo e Innovación
Beneficiary centre UNIVERSIDAD CARLOS III DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Adaptive access class barring for efficient mMTC

  • Leyva-Mayorga, Israel
  • Tello-Oquendo, Luis
  • Rodríguez-Hernández, Miguel A.|||0000-0002-3616-1928
  • Pla, Vicent|||0000-0002-0894-9494
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
[EN] In massive machine-type communications (mMTC), an immense number of wireless devices communicate autonomously to provide users with ubiquitous access to information and services. The current 4G LTE-A cellular system and its Internet of Things (IoT) implementation, the narrowband IoT (NB-IoT), present appealing options for the interconnection of these wireless devices. However, severe congestion may arise whenever a massive number of highly-synchronized access requests occur. Consequently, access control schemes, such as the access class barring (ACB), have become a major research topic. In the latter, the precise selection of the barring parameters in a real-time fashion is needed to maximize performance, but is hindered by numerous characteristics and limitations of the current cellular systems. In this paper, we present a novel ACB configuration (ACBC) scheme that can be directly implemented at the cellular base stations. In our ACBC scheme, we calculate the ratio of idle to total available resources, which then serves as the input to an adaptive filtering algorithm. The main objective of the latter is to enhance the selection of the barring parameters by reducing the effect of the inherent randomness of the system. Results show that our ACBC scheme greatly enhances the performance of the system during periods of high congestion. In addition, the increase in the access delay during periods of light traffic load is minimal., This research has been supported in part by the Ministry of Economy and Competitiveness of Spain under Grant TIN2013-47272-C2-1-R and Grant TEC2015-71932-REDT. The research of I. Leyva-Mayorga was partially funded by grant 383936 CONACYT-GEM 2014.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Extended Access Barring for Handling Massive Machine Type Communication (mMTC) Deployments, Restriccion de Acceso Extendida para Manejar Despliegues Masivos de ¿ Comunicaciones Tipo Maquina (mMTC)

  • Tello-Oquendo, Luis
  • Vidal Catalá, José Ramón|||0000-0002-7137-1349
  • Pla, Vicent|||0000-0002-0894-9494
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
[ES] La comunicacion masiva tipo m ¿ aquina (mMTC) ha presentado un momento promete- ¿ dor para generar conexiones potentes y ubicuas que enfrentan muchos desaf¿¿os nuevos. Las redes celulares son la solucion potencial debido a su amplio despliegue de in- ¿ fraestructura, confiabilidad, seguridad y eficiencia. En las redes mMTC basadas en comunicacion celular, el canal de acceso aleatorio se utiliza para establecer la conexi ¿ on¿ entre los dispositivos MTC y las estaciones base (eNBs), donde el principal desaf¿¿o es la conectividad escalable y eficiente para una enorme cantidad de dispositivos. Para hacer frente a esto, el Third Generation Partnership Project (3GPP) ha sugerido la restriccion de acceso extendida (EAB) como un mecanismo para el control de la con- ¿ gestion. Las eNBs activan o desactivan EAB utilizando un coeficiente de congesti ¿ on. En ¿ este documento se presenta un enfoque para implementar el coeficiente de congestion¿ de modo que EAB pueda operar y as¿¿ manejar los episodios de congestion en escenarios ¿ de mMTC. Tambien se examina el rendimiento de EAB bajo diferentes cargas de tr ¿ afico ¿ de MTC y configuraciones de ciclo de paginacion en t ¿ erminos de indicadores clave de ¿ rendimiento de la red (KPIs). Los resultados numericos demuestran la efectividad del ¿ metodo propuesto para detectar episodios de congesti ¿ on. Adem ¿ as se demuestra que el ¿ aumento del valor de la configuracion del ciclo de paginaci ¿ on influye en el compor- ¿ tamiento de la red bajo EAB., [EN] Massive machine type communication (mMTC) has presented a promising moment to generate powerful and ubiquitous connections that face plenty of new challenges. Cellular networks are the potential solution owing to their extensive infrastructure deployment, reliability, security, and efficiency. In cellular-based mMTC networks, the random access channel is used to establish the connection between MTC devices and base stations (eNBs), where the scalable and efficient connectivity for a tremendous number of devices is the primary challenge. To deal with this, the Third Generation Partnership Project (3GPP) has suggested the extended access barring (EAB) as a mechanism for congestion control. The eNBs activate or deactivate EAB using a congestion coefficient. In this paper, an approach to implementing the congestion coefficient is presented so that EAB can operate thus handling congestion episodes in mMTC scenarios. Moreover, the performance of EAB is examined under different MTC traffic loads and paging cycle configurations concerning network key performance indicators (KPIs). Numerical results demonstrate the effectiveness of the proposed method to detect congestion episodes. Also, it is shown that increasing the value of the paging cycle configuration influence on the network behavior under EAB., This work was supported in part by the Ministry of Economy and Competitiveness of Spain under Grants TIN2013-47272-C2-1-R and TEC2015- 71932-REDT.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the accurate performance evaluation of the LTE-A random access procedure and the access class barring scheme

  • Leyva-Mayorga, Israel
  • Tello-Oquendo, Luis
  • Pla, Vicent|||0000-0002-0894-9494
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
  • Casares-Giner, Vicente|||0000-0002-6947-8470
[EN] The performance evaluation of the random access (RA) in LTE-A has recently become a major research topic as these networks are expected to play a major role in future 5G networks. Up to now, the key performance indicators (KPIs) of the RA in LTE-A have been obtained either by performing a large number of simulations or by means of analytic models that, oftentimes, sacrifice precision in exchange for simplicity. In this paper, we present an analytical model for the performance evaluation of the LTE-A RA procedure that incorporates the access class barring (ACB) scheme. By means of this model, each and every one of the KPIs suggested by the 3GPP can be obtained with minimal error when compared with results obtained by simulation. To the best of our knowledge, this paper presents the most accurate analytical model, which can be easily adapted to incorporate modifications of network parameters and/or extensions to the LTE-A system. In addition, our model of the ACB scheme can be easily incorporated to other analytic models of similar nature without further modifications., This work was supported in part by the Ministry of Economy and Competitiveness of Spain under Grant TIN2013-47272-C2-1-R and Grant TEC2015-71932-REDT. The research of I. Leyva-Mayorga was supported under Grant 383936 CONACYT-Gobierno del Estado de Mexico 2014. The research of L. Tello-Oquendo was supported in part by Programa de Ayudas de Investigacion y Desarrollo, Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance Analysis and Optimal Access Class Barring Parameter Configuration in LTE-A Networks With Massive M2M Traffic

  • Tello-Oquendo, Luis
  • Leyva-Mayorga, Israel
  • Pla, Vicent|||0000-0002-0894-9494
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
  • Vidal Catalá, José Ramón|||0000-0002-7137-1349
  • Casares-Giner, Vicente|||0000-0002-6947-8470
  • Guijarro, Luis|||0000-0001-9774-9728
[EN] Over the coming years, it is expected that the number of machine-to-machine (M2M) devices that communicate through long term evolution advanced (LTE-A) networks will rise significantly for providing ubiquitous information and services. However, LTE-A was devised to handle human-to-human traffic, and its current design is not capable of handling massive M2M communications. Access class barring (ACB) is a congestion control scheme included in the LTE-A standard that aims to spread the accesses of user equipments (UEs) through time so that the signaling capabilities of the evolved Node B are not exceeded. Notwithstanding its relevance, the potential benefits of the implementation of ACB are rarely analyzed accurately. In this paper, we conduct a thorough performance analysis of the LTE-A random access channel and ACB as defined in the 3GPP specifications. Specifically, we seek to enhance the performance of LTE-A in massive M2M scenarios by modifying certain configuration parameters and by the implementation of ACB. We observed that ACB is appropriate for handling sporadic periods of congestion. Concretely, our results reflect that the access success probability of M2M UEs in the most extreme test scenario suggested by the 3GPP improves from approximately 30%, without any congestion control scheme, to 100% by implementing ACB and setting its configuration parameters properly., This work was supported in part by the Ministry of Economy and Competitiveness of Spain under Grants TIN2013-47272-C2-1-R and TEC2015-71932-REDT. The work of L. Tello-Oquendo was supported in part by Programa de Ayudas de Investigacion y Desarrollo (PAID), Universitat Politecnica de Valencia. The work of I. Leyva-Mayorga was supported in part by Grant 383936 CONACYT-Gobierno del Estado de Mexico 2014.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Simulation of the Communications System for a National Radiation-Dose Databank, Simulación de las Comunicaciones Asociadas a un Banco Nacional de Dosis a Pacientes

  • Rodríguez-Hernández, Miguel A.|||0000-0002-3616-1928
  • Gomez Sacristan, A.
  • Jiménez-Peralta, F. G.
[EN] This work presents a simulator for the communications system associated with a National RadiationDose Databank for the radiological protection of Spanish public health patients. The work shows a communications simulator developed over OMNET++ that allows radiological centers in specific points of the country with different types of radiological equipment. In addition, the simulator allows different configurations of the communications systems. The work also shows the results of the traffic generated by this new service in different parts of the country and with several types of radiation dosimetry information sent to the National Radiation-Dose Databank., [ES] Este trabajo presenta un simulador del sistema de comunicaciones asociado a un Banco Nacional de Dosis a Pacientes para la protección radiológica de los pacientes de la sanidad pública española. El trabajo presenta un simulador de comunicaciones realizado sobre OMNET++ que permite definir centros radiológicos en distintos puntos del país con diferentes tipos de equipamientos radiológicos. Además el simulador admite diferentes configuraciones sobre sus sistemas de comunicaciones. El trabajo presenta también los resultados en cuanto al tráfico que generaría este nuevo servicio en diferentes puntos del país y con distintos tipos de información dosimétrica enviada al Banco Nacional de Dosis a Pacientes., This work was supported by Spanish Government Projects TIN2013-47272-C2-1-R and TEC2015-71932-REDT.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance of Frame Transmissions and Event-triggered Sleeping in Duty-Cycled WSNs with Error-Prone Wireless Links

  • Guntupalli, Lakshmikanth
  • Li, Frank Y.
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
[EN] Two types of packet transmission schemes are prevalent in duty-cycled wireless sensor networks, i.e., single packet transmission and aggregated packet transmission which integrates multiple packets in one frame. While most existing models are developed based on an error-free channel assumption, this pa- per evaluates the performance of both transmission schemes under error-prone channel conditions. We develop a four-dimensional discrete-time Markov chain model to investigate the impact of channel im- pairments on the performance of frame transmissions. Together with tracking the number of packets in the queue, number of retransmissions and number of active nodes, the fourth dimension of the model is able to capture the channel behavior at the frame-level. Based on the developed model, we analyze packet loss probability, packet delay, throughput, node energy consumption, and energy efficiency under various channel conditions. To further reduce energy consumption, we propose an event-triggered sleep- ing (ETS) energy mode for synchronous duty-cycling medium access control protocols. Numerical results reveal to which extent channel impairments may deteriorate the network performance, as well as the advantage of adopting aggregated packet transmission. The benefit brought by the ETS energy mode is also demonstrated showing that the network lifetime is considerably extended, particularly in low traffic load scenarios.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance evaluation of framed slotted ALOHA with reservation packets and succesive interference cancelation for M2M networks

  • Casares-Giner, Vicente|||0000-0002-6947-8470
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
  • Portillo, Canek
[EN] Random access protocols like ALOHA have been considered for machine-to-machine (M2M) communication in future networks for their simplicity of operation. This paper evaluates the performance of a Frame Slotted-ALOHA protocol that uses reservation and data packets (FSA-RDP), in a scenario where a controller collects data packets transmitted by a finite number of M2M devices. In FSA-RDP, frames of variable duration are divided in two parts, the reservation and data subframes. During the reservation subframe, active devices send short reservation packets to the controller. The controller assigns reserved slots in the data subframe to those devices that succeeded with the reservation. At devices, the FIFO service discipline and two queue management schemes, tail drop and push-out, have been considered. When the queue size is of one packet, we develop a discrete-time Markov chain to evaluate the protocol performance, including the cumulative distribution function of the delay of data packets that are successfully transmitted. Analytical results are validated by extensive simulations. The simulation model is also used to evaluate the system performance when larger queues are used. In addition, we study the impact that implementing Successive Interference Cancellation (SIC) at the controller has on the system performance. We also evaluate the performance of implementing SIC at the controller together with Irregular Repetition Slotted ALOHA (IRSA) to send the reservation packets. Numerical results show that the protocol efficiency of FSA-RDP is between one and two orders of magnitude larger than the efficiency of conventional Frame Slotted ALOHA, when a perfect channel is assumed. In more realistic channel environments, the use of SIC brings an important performance boost., This work has been supported by the Ministry of Economy and Competitiveness of Spain through projects TIN2013-47272-C2-1-R and TEC2015-71932-REDT. The authors would like to thank the support received from the Institute ITACA (Instituto Universitario de Tecnologias de la Informacion y Comunicaciones) at the Universitat Politecnica de Valencia, Spain. C. Portillo acknowledges the funding received from the European Union under the program Erasmus Mundus Partnerships, project EuroinkaNet, GRANT AGREEMENT NUMBER -2014 -0870/001/001, and the support received from SEP-SES (DSA/103.5/15/6629).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance model for two-tier mobile wireless networks with macrocells and small cells

  • Casares-Giner, Vicente|||0000-0002-6947-8470
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
  • Ge, Xiaohu
[EN] A new analytical model is proposed to evaluate the performance of two-tier cellular networks composed of macrocells (MCs) and small cells (SCs), where terminals roam across the service area. Calls being serviced by MCs may retain their channel when entering a SC service area, if no free SC channels are available. Also, newly offered SC calls can overflow to the MC. However, in both situations channels may be repacked to vacate MC channels. The cardinality of the state space of the continuous-time Markov chain (CTMC) that models the system dynamics makes the exact system analysis unfeasible. We propose an approximation based on constructing an equivalent CTMC for which a product-form solution exist that can be obtained with very low computational complexity. We determine performance parameters such as the call blocking probabilities for the MC and SCs, the probability of forced termination, and the carried traffic. We validate the analytical model by simulation. Numerical results show that the proposed analytical model achieves very good precision in scenarios with diverse mobility rates and MCs and SCs loads, as well as when MCs overlay a large number of SCs., Authors would like to thank you the anonymous reviewers for the review comments provided to our work that have decisively contributed to improve the paper. Most of the contribution of V. Casares-Giner was done while visiting the Huazhong University of Science and Technolgy (HUST), Whuhan, China. This visit was supported by the European Commission, 7FP, S2EuNet project. The authors from the Universitat Politecnica de Valencia are partially supported by the Ministry of Economy and Competitiveness of Spain under grant TIN2013-47272-C2-1-R and TEC2015-71932-REDT. The research of Xiaohu Ge was supported by the National Natural Science Foundation of China (NSFC) grant 61210002, the Fundamental Research Funds for the Central Universities grant 2015XJGH011, and China International Joint Research Center of Green Communications and Networking grant 2015B01008.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efficient Random Access Channel Evaluation and Load Estimation in LTE-A with Massive MTC

  • Tello-Oquendo, Luis
  • Leyva-Mayorga, Israel
  • Pla, Vicent|||0000-0002-0894-9494
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
  • Casares-Giner, Vicente|||0000-0002-6947-8470
  • Guijarro, Luis|||0000-0001-9774-9728
[EN] The deployment of machine-type communications (MTC) together with cellular networks has a great potential to create the ubiquitous Internet-of-Things environment. Nevertheless, the simultaneous activation of a large number of MTC devices (named UEs herein) is a situation difficult to manage at the evolved Node B (eNB). The knowledge of the joint probability distribution function (PDF) of the number of successful and collided access requests within a random access opportunity (RAO) is a crucial piece of information for contriving congestion control schemes. A closed-form expression and an efficient recursion to obtain this joint PDF are derived in this paper. Furthermore, we exploit this PDF to design estimators of the number of contending UEs in an RAO. Our numerical results validate the effectiveness of our recursive formulation and show that its computational cost is considerably lower than that of other related approaches. In addition, our estimators can be used by the eNBs to implement highly efficient congestion control methods., This work was supported in part by the Ministry of Economy and Competitiveness of Spain under Grants TIN2013-47272-C2-1-R and TEC2015-71932-REDT. The work of L. Tello-Oquendo was supported in part by the Universitat Politecnica de Valencia under the Programa de Ayudas de Investigacion y Desarrollo (PAID). The work of I. Leyva-Mayorga was supported in part by the CONACYT-Gobierno del Estado de Mexico under Grant 383936. The review of this paper was coordinated by Dr. Y. Ji.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance analysis of wireless networks based on time-scale separation: A new iterative method

  • Tello Oquendo, Luis Patricio
  • Pla, Vicent|||0000-0002-0894-9494
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
  • Casares-Giner, Vicente|||0000-0002-6947-8470
The complexity of modern communication networks makes the solution of the Markov chains that model their traffic dynamics, and therefore, the determination of their performance parameters, computationally costly. However, a common characteristic of these networks is that they manage multiple types of traffic flows operating at different time-scales. This time-scale separation can be exploited to substantially reduce the computational cost. Following this approach, we propose a novel solution method named Absorbing Markov Chains Approximation (AMCA) based on the transient regime analysis. Briefly, we model the time the system spends in a series of subsets of states by a phase-type distribution and, for each of them, determine the probabilities of finding the system in each state of this subset until absorption. We compare the AMCA performance to that obtained by classical methods and by a recently proposed approach that aims at generalizing the conventional quasi-stationary approximation. We find that AMCA has a more predictable behavior, is applicable to a wider range of time-scale separations, and achieves higher accuracy for a given computational cost., This research has been supported in part by the Ministry of Economy and Competitiveness of Spain under Grants TIN2013-47272-C2-1-R and TEC2015-71932-REDT. The research of L. Tello-Oquendo was supported in part by Programa de Ayudas de Investigacion y Desarrollo (PAID) of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Filtering Methods for Efficient Dynamic Access Control in 5G Massive Machine-Type Communication Scenarios

  • Leyva-Mayorga, Israel
  • Rodríguez-Hernández, Miguel A.|||0000-0002-3616-1928
  • Pla, Vicent|||0000-0002-0894-9494
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
[EN] One of the three main use cases of the fifth generation of mobile networks (5G) is massive machine-type communications (mMTC). The latter refers to the highly synchronized accesses to the cellular base stations from a great number of wireless devices, as a product of the automated exchange of small amounts of data. Clearly, an efficient mMTC is required to support the Internet-of-Things (IoT). Nevertheless, the method to change from idle to connected mode, known as the random access procedure (RAP), of 4G has been directly inherited by 5G, at least, until the first phase of standardization. Research has demonstrated the RAP is inefficient to support mMTC, hence, access control schemes are needed to obtain an adequate performance. In this paper, we compare the benefits of using different filtering methods to configure an access control scheme included in the 5G standards: the access class barring (ACB), according to the intensity of access requests. These filtering methods are a key component of our proposed ACB configuration scheme, which can lead to more than a three-fold increase in the probability of successfully completing the random access procedure under the most typical network configuration and mMTC scenario., This research has been supported in part by the Ministry of Economy and Competitiveness of Spain under Grant TIN2013-47272-C2-1-R and Grant TEC2015-71932-REDT. The research of I. Leyva-Mayorga was partially funded by grant 383936 CONACYT-GEM 2014.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reduced Cycle Spinning Method for the Undecimated Wavelet Transform

  • Rodríguez-Hernández, Miguel A.|||0000-0002-3616-1928
[EN] The Undecimated Wavelet Transform is commonly used for signal processing due to its advantages over other wavelet techniques, but it is limited for some applications because of its computational cost. One of the methods utilized for the implementation of the Undecimated Wavelet Transform is the one known as Cycle Spinning. This paper introduces an alternative Cycle Spinning implementation method that divides the computational cost by a factor close to 2. This work develops the mathematical background of the proposed method, shows the block diagrams for its implementation and validates the method by applying it to the denoising of ultrasonic signals. The evaluation of the denoising results shows that the new method produces similar denoising qualities than other Cycle Spinning implementations, with a reduced computational cost., This research was funded by grants number PGC2018-09415-B-I00 (MCIU/AEI/FEDER, UE) and TEC2015-71932-REDT.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Communications for Sanitary Teleservices in a Smart City, Comunicaciones para Teleservicios Sanitarios en una Ciudad Inteligente

  • Gomez-Sacristan, Á.
  • Rodríguez-Hernández, Miguel A.|||0000-0002-3616-1928
[EN] A Smart City is characterized by being a desirable place to live and that encourages initiatives that affect the wellbeing of citizens, anticipating their needs in an efficient, flexible and sustainable way. This work describes a scenario of improvement in the quality of care of the citizens in a Smart City environment through the intensive use of communications, devices and specific applications. For the evaluation of benefits of this hypothetical scenario, a tool developed on the OMNET ++ simulation environment called "SimulCity" will be used, that will allow evaluating the quality of service offered to users. Finally, results of this scenario will be shown., [ES] Una Ciudad Inteligente está caracterizada por ser un lugar deseable para vivir y que fomenta iniciativas que inciden en el bienestar de los ciudadanos adelantándose a sus necesidades de una manera eficiente, flexible y sostenible. Este trabajo describe un escenario de mejora en la calidad asistencial de la ciudadanía en un entorno de Ciudad Inteligente mediante el uso intensivo de comunicaciones, dispositivos y aplicaciones específicas. Para la evaluación de prestaciones de este escenario hipotético se utilizará una herramienta denominada ¿SimulCity¿ desarrollada sobre el entorno de simulación OMNET++ que permitirá evaluar la calidad de servicio ofrecida a los usuarios. Por último, se mostrarán resultados de este escenario., This work was supported by Spanish Government Projects TIN2013-47272-C2-1-R and TEC2015-71932-REDT.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

End to End Delay and Energy Consumption in a Two Tier Cluster Hierarchical Wireless Sensor Networks

  • Casares-Giner, Vicente|||0000-0002-6947-8470
  • Vargas Hernández, Tito Raúl
  • Navas, Tatiana Inés
  • Smith Flórez, Dolly
[EN] In this work it is considered a circular Wireless Sensor Networks (WSN) in a planar structure with uniform distribution of the sensors and with a two-level hierarchical topology. At the lower level, a cluster configuration is adopted in which the sensed information is transferred from sensor nodes to a cluster head (CH) using a random access protocol (RAP). At CH level, CHs transfer information, hop-by-hop, ring-by-ring, towards to the sink located at the center of the sensed area using TDMA as MAC protocol. A Markovian model to evaluate the end-to-end (E2E) transfer delay is formulated. In addition to other results such as the well know energy hole problem, the model reveals that for a given radial distance between the CH and the sink, the transfer delay depends on the angular orientation between them. For instance, when two rings of CHs are deployed in the WSN area, the E2E delay of data packets generated at ring 2 and at the ¿west¿ side of the sink, is 20% higher than the corresponding E2E delay of data packets generated at ring 2 and at the ¿east¿ side of the sink. This asymmetry can be alleviated by rotating from time to time the allocation of temporary slots to CHs in the TDMA communication. Also, the energy consumption is evaluated and the numerical results show that for a WSN with a small coverage area, say a radio of 100 m, the energy saving is more significant when a small number of rings are deployed, perhaps none (a single cluster in which the sink acts as a CH). Conversely, topologies with a large number of rings, say 4 or 5, offer a better energy performance when the service WSN covers a large area, say radial distances greater than 400 m., The work of V. Casares-Giner (ITACA research institute) is partly supported by the Spanish national projects TIN2013-47272-C2-1-R and TEC2015-71932-REDT. The work of Tatiana Navas, Dolly Florez, and Tito R. Vargas H., and the collaboration between the two institutions, is supported by the Universidad Santo Tomas under Master Degree's research and academic projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Intelligent Municipal Heritage Management Service in a Smart City: Telecommunication Traffic Characterizationand Quality of Service

  • Rodríguez-Hernández, Miguel A.|||0000-0002-3616-1928
  • Pla, Vicent|||0000-0002-0894-9494
  • Jiang, Zhuhan
  • Gomez-Sacristan, Ángel
[EN] The monitoring of cultural heritage is becoming common in cities to provide heritage preservation and prevent vandalism. Using sensors and video cameras for this task implies the need to transmit information. In this paper, the teletraffic that cameras and sensors generate is characterized and the transmissions¿ influence on the municipal communications network is evaluated. Then, we propose models for telecommunication traffic sources in an intelligent municipal heritage management service inside a smart sustainable city. The sources were simulated in a smart city scenario to find the proper quality of service (QoS) parameters for the communication network, using Valencia City as background. Specific sensors for intelligent municipal heritage management were selected and four telecommunication traffic sources were modelled according to real-life requirements and sensors datasheet. Different simulations were performed to find the proper CIR (Committed Information Rate) and PIR (Peak Information Rate) values and to study the effects of limited bandwidth networks. Packet loss, throughput, delay, and jitter were used to evaluate the network¿s performance. Consequently, the result was the selection of the minimum values for PIR and CIR that ensured QoS and thus optimized the traffic telecommunication costs associated with an intelligent municipal heritage management service., This work was partially supported by Spanish Government Projects TIN2013-47272-C2-1-R and TEC2015-71932-REDT
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Telecom Traffic Characterization &amp, Quality of Service in a Smart City: Municipal Heritage Management Service

  • Jiang, Zhuhan
  • Gomez-Sacristan, Ángel
  • Rodríguez-Hernández, Miguel A.|||0000-0002-3616-1928
[EN] This paper aims to define characterization of telecom traffic sources in intelligent municipal heritage management service inside smart sustainable city (SSC) and to find out a proper quality of service (QoS) mechanism for this communication network using Valencia City as background. Four traffic heterogenous sources were defined according to real-life requirements and datasheet of sensors suitable. Different simulation has been made to find proper CIR (Committed Information Rate) and PIR (Peak Information Rate) values for this network. Network¿s performance was checked through its packet loss, throughput, delay and jitter. As the result, we defined minimum values for PIR and CIR, and thus traffic telecom costs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Modelado y evaluación de prestaciones de redes de sensores inalámbricos heterogéneos con ciclo de trabajo síncrono

  • Portillo Jiménez, Canek
[ES] Las redes de sensores inalámbricas (WSN) han experimentado un resurgimiento debido al desarrollo de la Internet de las Cosas (IoT). Una de las características de las aplicaciones de la IoT es la necesidad de hacer uso de dispositivos sensores y actuadores. En aplicaciones como automatización de edificios, de gestión energética, industriales o de salud, los nodos sensores que componen la WSN, transmiten información a un colector central o sink. La información es posteriormente procesada, analizada y utilizada para propósitos específicos. En cada una de estas aplicaciones, los dispositivos sensores pueden considerarse como parte de una WSN. En ese sentido el modelado y la evaluación de las prestaciones en las WSN es importante, ya que permite obtener una visión más clara de su comportamiento, facilitando un adecuado diseño y una exitosa puesta en operación. En el presente trabajo de tesis se han desarrollado modelos matemáticos para evaluar las prestaciones de WSN, los cuales están basados en Cadenas de Markov en Tiempo Discreto (DTMC). Los parámetros de prestaciones elegidos para la evaluación son: energía consumida promedio, eficiencia energética, caudal cursado y retardo promedio de los paquetes. Los resultados que se han obtenido han sido validados por medio de simulación basada en eventos discretos (DES). Existen estudios de WSN en escenarios homogéneos, donde los nodos que componen la red inalámbrica son del mismo tipo y tienen las mismas características de operación. En estos análisis se definen WSN homogéneas compuestas por un nodo central o sumidero (sink), que recibe la información de los nodos sensores localizados alrededor, formando una célula o cluster. Estos nodos realizan las transmisiones en SPT (Single Packet Transmission), enviando un solo paquete por ciclo de transmisión. Sin embargo, es posible encontrar, más ahora con el desarrollo de la IoT, escenarios donde coexisten distintos tipos de nodos, con características diferentes y, por tanto, con requerimientos de operación específicos. Esto da lugar a la formación de clusters cuyos nodos tienen aplicaciones distintas, desigual consumo de energía, diversas tasas de trasmisión de datos, e incluso diferentes prioridades de acceso al canal de transmisión. Este tipo de escenarios, que denominamos heterogéneos, forman parte de los escenarios estudiados en el presente trabajo de tesis. En una primera parte, se ha desarrollado un modelo para evaluar las prestaciones de una WSN heterogénea y con prioridades de acceso al medio. El modelado incluye un par de DTMC de dos dimensiones (2D-DTMC) cada una, cuya solución en términos de la distribución de probabilidad estacionaria, es utilizada para determinar los parámetros de prestaciones. Se desarrollan, por tanto, expresiones cerradas para los parámetros de prestaciones, en función de la distribución estacionaria que se ha obtenido a partir de la solución de las 2D-DTMC. En una segunda parte, se desarrolla un modelo analítico también pensado para escenarios heterogéneos y con prioridades, pero en el que los nodos de la WSN, cuando consiguen acceso al canal, transmiten un conjunto de paquetes en vez de uno solo como en el modelo de la primera parte. Estos dos modos de operación de los sensores los denominamos aggregated packet trans- mission (APT) y single packet transmission (SPT), respectivamente. El número de paquetes que un nodo funcionando en APT trasmite cuando accede al canal es el menor entre un parámetro configurable y el número de paquetes que tuviera en la cola en ese momento. Este modo de operación consigue una mayor eficiencia energética y un aumento en el caudal cursado, además de una disminución en el retardo promedio de los paquetes. En una tercera parte, se propone un nuevo procedimiento analítico para la determinación del consumo energético de los nodos que conforman una WSN. A diferencia de los métodos de cálculo anteriores, la nueva prop, [CA] Les xarxes de sensors sense fils (WSN) han experimentat un ressorgiment causa de al desenvolupament de la Internet de les Coses (IoT). Una de les característiques de IoT és la inclusió, en les seves aplicacions, de dispositius sensors i actuadors. En aplicacions com automatització d'edificis, de gestió energètica, industrials o de salut, els nodes sensors que componen la WSN, transmeten informació a un col·lector central o sink. La informació és posteriorment processada, analitzada i utilitzada per a propòsits específics. En cadascuna d'aquestes aplicacions, els dispositius sensors poden considerar com a part d'una WSN. En aquest sentit el modelitzat i l'avaluació de l'acompliment en les WSN és important, ja que permet obtenir una visió més clara del seu comportament, facilitant un adequat disseny i una exitosa posada en operació. En el present treball de tesi s'han desenvolupat models matemàtics per avaluar l'acompliment de WSN, els quals estan basats en Cadenes de Markov en Temps Discret (DTMC). Els paràmetres d'acompliment obtinguts per a l'avaluació són: energia consumida mitjana, eficiència energètica, cabal cursat i retard mitjà dels paquets. Els resultats que s'han obtingut, han estat validats per mitjà de simulació basada en esdeveniments discrets (DES). Existeixen estudis de WSN en escenaris homogenis, on els nodes que componen la xarxa sense fils són de el mateix tipus i tenen les mateixes característiques d'operació. En aquests anàlisis prèvies es defineixen WSN homogènies compostes per un node central o embornal (sink), que rep la informació dels nodes sensors localitzats al voltant, formant una cèl·lula o cluster. Aquests nodes realitzen les transmissió en SPT (Single Packet Transmission), és a dir, enviant un sol paquet cada vegada que transmeten. No obstant això, és possible trobar, més ara amb el desenvolupament de la IOT, escenaris on hi ha una coexistència de distints tipus de nodes, amb característiques diferents i, per tant, amb requeriments d'operació específics. Això dona lloc a formació de clusters els nodes tenen aplicacions diferents, desigual consum d'energia, diverses taxes de transmissió de dades, i fins i tot diferent prioritats d'accés a canal de transmissió. Aquest tipus d'escenaris, que anomenem heterogenis, formen part dels escenaris estudiats en el present treball de tesi. En una primera part, s'ha desenvolupat un model per avaluar l'acompliment d'una WSN heterogènia i amb prioritats d'accés al medi. El modelitzat inclou un parell DTMC de dues dimensions (2D-DTMC), la solució en termes de la distribució estacionària de probabilitat, és utilitzada per obtenir posteriorment els paràmetres d'acompliment. Es desenvolupen, per tant, expressions tancades per a la determinació dels paràmetres d'acompliment, on és substituïda la distribució estacionària que s'ha obtingut a partir de la solució de les 2D-DTMC. En una segona part, es desenvolupa un model, en el qual els nodes pertanyents a la WSN, poden transmetre els seus paquets en agregat (APT) en escenaris heterogenis i amb prioritats. A diferència del model anterior, on els nodes transmeten un paquet per cicle (SPT), en APT els nodes poden transmetre més d'un paquet. Això porta com a conseqüència una major eficiència energètica, a més d'un augment en el cabal cursat i disminució en el retard mitjana. En una tercera part, es proposa un nou desenvolupament analític per a la determinació del consum energètic dels nodes que conformen una WSN. A diferència de les expressions utilitzades anteriorment per al càlcul del consum energètic, aquesta proposta alternativa permet obtenir resultats més precisos a través del desenvolupament d'expressions més intuïtives i sistemàtiques. Amb aquest nou procediment, es realitzen estudis energètics per WSN en escenaris homogenis i heterogenis., [EN] Wireless sensor networks (WSN) have experienced a resurgence due to the development of the Internet of Things (IoT). One of the characteristics of IoT is the deployment of applications that require sensor devices and actuators. In applications such as building automation, energy management, industrial or health, the sensor nodes that make up the WSN transmit information to a central collector or sink. The information is processed, analyzed, and used for specific purposes. In each of these applications, the sensor devices can be considered part of a WSN. In this sense, the modeling and performance evaluation of WSN is important, since it allows obtaining a clearer vision of their behavior, facilitating an adequate design and a successful operation. In the present thesis, analytical models based on Discrete Time Markov Chains (DTMC) have been developed to evaluate the performance of WSN. The parameters defined for the performance evaluation are: average consumed energy, energy efficiency, throughput and average packet delay. The obtained results have been validated by means of discrete event simulation (DES). There are studies of WSN in homogeneous scenarios, where the nodes that compose the WSN are of the same type and have the same operating characteristics. In these previous studies, homogeneous WSN are defined as a cell or cluster composed of a central node or sink, which receives the information from the sensor nodes located around it. These nodes operate in SPT (Single Packet Transmission), sending a single packet per transmission cycle. However, it is possible to find, especially now with the development of the IoT, scenarios where different types of nodes coexist, although they have different characteristics or specific operational requirements. This results in the formation of clusters whose nodes have different applications, uneven power consumption, different data transmission rates, and even different priorities for access to the transmission channel. These types of scenarios, which we call heterogeneous, are part of the scenarios studied in this thesis work. In the first part, a model has been developed to evaluate the performance of a heterogeneous WSN and with priorities to access a common channel. The model includes a two-dimensional DTMC pair (2D-DTMC), whose solution in terms of the stationary probability distribution is used to obtain the performance parameters. Closed expressions are provided for the determination of performance parameters of interest, given in terms of the stationary distribution of the 2D-DTMC. In a second part, an analytical model is developed to evaluate the performance of a heterogeneous WSN, where nodes operate in aggregate packet transmission (APT) mode and deploy different channel access priorities. Un like the previous model, where the nodes transmit one packet per cycle (SPT) when they gain access to the channel, in APT the nodes can transmit a number of packets larger than one, that is the minimum between a configurable parameter and the number of packets in the packet queue of the node. This results in greater energy efficiency and throughput, while decreases the average packet delay. In a third part, a new analytical model is proposed to determine the energy consumption of the nodes that make up a WSN. Unlike previous computation procedures, this alternative proposal is based on more intuitive and systematic expressions and allows to obtain more accurate results. With this new procedure, energy studies are performed for WSN in homogeneous and heterogeneous scenarios., Este trabajo se ha desarrollado en el marco de los siguientes proyectos de investigación: Platform of Services for Smart Cities with Dense Machine to Machine Networks, PLASMA, TIN2013-47272-C2-1-R and New Paradigms of Elastic Networks for a World Radically Based on Cloud and Fog Computing, Elastic Networks, TEC2015-71932-REDT. También quisiera agradecer el apoyo recibido por parte de the European Union under the program Erasmus Mundus Partnerships, project EuroinkaNet, GRANT AGREEMENT NUMBER - 2014-0870/001/001 y La Secretaria de Educación Pública (México), bajo el Programa para el Desarrollo Profesional Docente: SEP-SES (DSA/103.5/15/6629).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

SimulCity: Planning Communications in Smart Cities

  • Rodríguez-Hernández, Miguel A.|||0000-0002-3616-1928
  • Gomez-Sacristan, Ángel
  • Gomez-Cuadrado, David
[EN] Communication networks have become a critical element in the development of smart cities. The information flows generated by thousands of sensors and systems must be managed to assure the adequate guarantees of quality, availability, and security. This paper introduces the SimulCity tool, which assists in the design of a smart city's communications convergent network. SimulCity allows a flexible simulation of different scenarios where multiple heterogeneous sources of human type communications (HTCs) and machine type communications (MTCs) compete for limited bandwidth resources. SimulCity evaluates the impact of new services on the performance of a municipal communications network and, consequently, assists the modification of network values to optimize bandwidth and reduce costs. Several network characteristics can be easily configured in SimulCity, such as the definition of traffic sources, the parametrization of different network mechanisms, access admission control, quality of service (QoS), and traffic in the multiprotocol label switching (MPLS) network. SimulCity was used to simulate different projects in the smart city of Valencia (Spain). Specifically, SimulCity was used to study the impact on the Valencia City Council's communications network of several new services: the solid waste collection supervision, the street lighting management, the control of regulated parking areas, and the upgrade of voice and video communications systems of the city government buildings. The results obtained have allowed the analysis of the impact that these new services have on the existing network and to perform an adequate dimensioning of the future municipal communications network., This work was supported in part by the Spanish Government under Project TIN2013-47272-C2-1-R and Project TEC2015-71932-REDT, and in part by the ITACA Institute Ayudas 2019
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Some teletraffic issues in optical burst switching with burst segmentation

  • Casares-Giner, Vicente|||0000-0002-6947-8470
Some teletraffic tools used in the evaluation of optical burst switching with burst segmentation (OBS/BS) are dealt. These analytic tools shown are in fact supported by the Molina or blocked call held model. Furthermore, some additional results are also obtained in OBS/BS when the head dropping is implemented as contention resolution scheme. In particular, it is shown that as long as the service discipline is work-conservative, the percentage of bursts that are completely lost is independent of the service discipline and equals to the fraction of information that is cut-off., This work has been supported by the national projects TIN2013-47272-C2-1-R and TEC2015-71932-REDT.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Elastic Networks thematic network results I: Planning and control of Flex-Grid/SDM

  • Moreno Muro, Francisco Javier
  • Rumipamba Zambrano, Rubén Darío
  • Perelló Muntan, Jordi|||0000-0001-6563-2664
  • Pavón Mariño, Pablo
  • Solé Pareta, Josep|||0000-0002-9411-6308
  • Martínez, Ricardo
  • Casellas Regi, Ramón
  • Vilalta, Ricard
  • Muñoz González, Raül
  • Mata Sáez, Javier
  • Ruiz Pérez, Lidia
  • Merayo Álvarez, Noemí
  • Miguel Jiménez, Ignacio de
  • Durán Barroso, Ramón J.
This paper overviews the approach of the Elastic Networks research network to address different issues of planning and control of Flex-Grid/SDM optical networks. Firstly, we present the Net2Plan open-source planning tool capabilities to model Flex-Grid/SDM networks; secondly a PCE-based Transport-SDN controller for packet over flex-grid optical networks is described. Finally results on machine-learning-based QoT classification techniques useful in planning and control tasks are reported., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Elastic Networks thematic network results I: Planning and control of Flex-Grid/SDM

  • Moreno Muro, Francisco Javier
  • Rumipamba Zambrano, Rubén Darío
  • Perelló Muntan, Jordi
  • Pavón Mariño, Pablo
  • Solé Pareta, Josep
  • Martínez, Ricardo
  • Casellas Regi, Ramón
  • Vilalta, Ricard
  • Muñoz González, Raül
  • Mata Sáez, Javier
  • Ruiz Pérez, Lidia
  • Merayo Álvarez, Noemí
  • Miguel Jiménez, Ignacio de
  • Durán Barroso, Ramón J.
This paper overviews the approach of the Elastic Networks research network to address different issues of planning and control of Flex-Grid/SDM optical networks. Firstly, we present the Net2Plan open-source planning tool capabilities to model Flex-Grid/SDM networks; secondly a PCE-based Transport-SDN controller for packet over flex-grid optical networks is described. Finally results on machine-learning-based QoT classification techniques useful in planning and control tasks are reported., Peer Reviewed, Postprint (author's final draft)