Skip to main content

TECNOLOGIAS RADIO PARA REDES ULTRA-DENSAS EN LA ERA 5G Y POSTERIOR (5G&B)

TEC2016-77148-C2-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Stochastic geometry analysis and design of wireless powered MTC networks

  • Liesegang Maria, Sergi
  • Muñoz Medina, Olga
  • Pascual Iserte, Antonio
©2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Machine-type-communications (MTC) are being crucial in the development of next generation mobile networks. Given that MTC devices are usually battery constrained, wireless power transfer (WPT) and energy harvesting (EH) have emerged as feasible options to enlarge the lifetime of the devices, leading to wireless powered networks. In that sense, we consider a setup where groups of sensors are served by a base station (BS), which is responsible for the WPT. Additionally, EH is used to collect energy from the wireless signals transmitted by other sensors. To characterize the energy obtained from both procedures, we model the sporadic activity of sensors as Bernoulli random variables and their positions with repulsive Matérn cluster processes. This way, the random activity and spatial distribution of sensors are introduced in the analysis of the energy statistics. This analysis can be useful for system design aspects such as energy allocation schemes or optimization of idle-active periods, among others. As an example of use of the developed analysis, we include the design of a WPT scheme under a proportional fair policy., The work presented in this paper was carried out within the framework of the project 5G&B RUNNER-UPC (TEC2016-77148-C2-1-R (AEI/FEDER, UE)), the research network RED2018-102668-T Red COMONSENS and the FPI grant BES-2017-079994, funded by the Spanish Ministry of Science, Innovation and Universities; and the grant 2017 SGR 578, funded by the Catalan Government (AGAUR, Secretaria d’Universitats i Recerca, Departament d’Empresa i Coneixement, Generalitat de Catalunya)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Entropy based sensing schemes for energy efficiency in massive MTC

  • Liesegang Maria, Sergi
  • Pascual Iserte, Antonio
  • Muñoz Medina, Olga
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Machine-type-communications (MTC) are crucial in the evolution of mobile communication systems. Within this context, we distinguish the so-called massive MTC (mMTC), where a large number of devices coexist in the same geographical area. In the case of sensors, a high correlation in the collected information is expected. In this letter, we evaluate the impact of correlation on the entropy of a set of quantized Gaussian sources. This model allows us to express the sensed data with the data correlation matrix. Given the nature of mMTC, these matrices may be well approximated as rank deficient. Accordingly, we exploit this singularity to design a technique for switching off several sensors that maximizes the entropy under power-related constraints. The discrete optimization problem is transformed into a convex formulation that can be solved numerically., This work is supported by the project 5G&B RUNNER-UPC (TEC2016-77148-C2-1-R (AEI/FEDER, UE)) and the research network RED2018-102668-T Red COMONSENS (funded by the Spanish Ministry of Science,Innovation and Universities), the fellowship FPI BES-2017-079994, and the grant 2017 SGR 578 (funded by the Catalan Government - AGAUR)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Energy efficient transmit-receive hybrid spatial modulation for large-scale MIMO systems

  • Raafat Hosny Mohamed Fahm, Ahmed
  • Sefunç, Merve
  • Agustín de Dios, Adrián
  • Vidal Manzano, José
  • Jorswieck, Eduard Axel
  • Corre, Yoann
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., We consider a point to point large-scale multipleinput multiple-output (MIMO) system operating in the millimeter wave (mmWave) band and an outdoor scenario. Novel transmit and receive spatial modulation (SM) schemes are proposed for uplink (UL) and downlink (DL) data transmission phases based on a novel energy efficient hybrid user terminal architecture. The analog circuitry of the proposed hybrid architecture is divided into two stages: phase shifters and analog switches. The phase shifting stage assures high gain and overcomes the severe path-loss caused by outdoor mmWave propagation. The analog switching stage smartly allocates the antennas to be used at the phase shifting stage and combats the spatial correlation. We provide the analysis of the spectral efficiency (SE) of the UL and DL systems. Next, we propose a reduced complexity algorithm that jointly optimizes the analog beamformer and combiner design of the UL and DL circuitry to maximize the energy efficiency (EE). Finally, we compare and evaluate the performance of the proposed algorithm in terms of the SE and EE assuming both stochastic and realistic channel models., The research leading to these results has been funded by the EuropeanUnion’s Horizon 2020 research and innovation programme under the MarieSklodowzka-Curie grant agreement No. 641985, the project 5G&B RUNNER-UPC (TEC2016-77148-C2-1-R (AEI/FEDER, UE)) and the Catalan Govern-ment (2017 SGR 578 - AGAUR)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Analysis of blocking in mmWave cellular systems: application to relay positioning

  • García Ruiz, Cristian
  • Pascual Iserte, Antonio
  • Muñoz Medina, Olga
Within the framework of 5G, blockage effects occurring in the mmWave band are critical. Previous works describe the effects of blockages in isolated and multiple links for simple blocking objects, modeled with mathematical tools such as stochastic geometry and random shape theory. Our study uses these tools to characterize a scenario with N links, including the possible correlation among them in terms of blocking for several models of blocking objects. We include numerical evaluations highlighting that assuming independence among the links’ blocking elements is a too-brief simplification and does not accurately describe the real scenario. This paper also applies the formulation developed for the case of N links to optimize the relay positioning in mmWave cells for coverage enhancement, that is, to minimize the communication failure probability. We also show that both link budget and blockages affect the optimum positioning of the relays as they are both essential for successful transmission., The work presented in this paper has been funded through the projects 5G&B-RUNNER-UPC (Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional, TEC2016-77148-C2-1-R / AEI/FEDER, UE) and ROUTE56 (Agencia Estatal de Investigación, PID2019- 104945GB-I00 / AEI / 10.13039/501100011033); and the grant 2017 SGR 578 (Catalan Government—Secretaria d’Universitats i Recerca, Departament d’Empresa i Coneixement, Generalitat de Catalunya, AGAUR)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A tractable closed form approximation of the ergodic rate in Poisson cellular networks

  • Aravanis, Alexios
  • Tu Lam, Thanh
  • Muñoz Medina, Olga
  • Pascual Iserte, Antonio
  • Di Renzo, Marco
The employment of stochastic geometry for the analysis and design of ultra dense networks (UDNs) has provided significant insights into network densification. In addition to the characterization of the network performance and behavior, these tools can also be exploited toward solving complex optimization problems that could maximize the capacity benefits arising in UDNs. However, this is preconditioned on the existence of tractable closed form expressions for the considered figures of merit. In this course, the present paper introduces an accurate approximation for the moment generating function (MGF) of the aggregate other-cell interference created by base stations whose positions follow a Poisson point process of given spatial density. Given the pivotal role of the MGF of the aggregate interference in stochastic geometry and the tractability of the derived MGF, the latter can be employed to substantially simplify ensuing stochastic geometry analyses. Subsequently, the present paper employs the introduced MGF to provide closed form expressions for the downlink ergodic capacity for the interference limited case, and validates the accuracy of these expressions by the use of extensive Monte Carlo simulations. The derived expressions depend on the density of users and base stations, setting out a densification road map for network operators and designers of significant value., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Wideband receive spatial modulation with time domain pre-equalizer for large MIMO systems

  • Raafat Hosny Mohamed Fahm, Ahmed
  • Agustín de Dios, Adrián
  • Vidal Manzano, José
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Receive spatial modulation (RSM) schemes are promising for massive multiple-input-multiple-output (MIMO) systems at millimeter wave (mmWave) bands because they require reduced complexity and low consumption hardware at the user terminal and exploit the receive spatial dimension to attain high spectral efficiency. To the best of our knowledge, these schemes have been developed for narrowband transmission. In this paper, we adapt RSM schemes for outdoor wideband mmWave massive MIMO systems. We consider the downlink of a single user system operating with single carrier RSM and design a low complexity time-domain finite impulse response pre-equalizer to combat the intersymbol interference caused by the wideband transmission, assuming imperfect channel knowledge. We show that receive antenna selection (RAS) is necessary for attaining high spectral efficiency and we suggest fast and efficient RAS algorithm. Simulation results show that the proposed RSM scheme achieves comparable spectral efficiency to the fully digital orthogonal frequency division multiplexing MIMO system with superior energy efficiency., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Multi-user precoder designs for RGB visible light communication systems

  • Viñals Terrés, Roser
  • Muñoz Medina, Olga
  • Agustín de Dios, Adrián
  • Vidal Manzano, José
In this paper, we design linear precoders for the downlink of a visible light communication (VLC) system that simultaneously serves multiple users. Instead of using phosphor-coated white light-emitting diodes (PWLEDs), we focus on Red-Green-Blue light-emitting diodes (RGB-LEDs) that allow modulating three separate data streams on the three primary colors of the RGB-LEDs. For this system, we design a zero-forcing (ZF) precoder that maximizes the weighted sum rate for a multilevel pulse amplitude modulation (M-PAM). The precoding design in RGB-based systems presents some challenges due to the system constraints, such as the limited power, the non-negative amplitude constraints per light-emitting diode (LED), and the need to guarantee white light emission while transmitting with RGB-LEDs. For comparison purposes, we also consider the ZF design for a PWLED-based system and evaluate the performance of both a PWLED- and an RGB-based system., The work has been supported by the Secretaria d’Universitats i Recerca Departament d’Empresa i Coneixement (AGAUR) of the Generalitat de Catalunya SGR grant 2017-SGR-578 and has been funded by the Agencia Estatal de Investigacion (AEI)/Fondo Europeo de Desarrollo Regional (FEDER) through the project TEC2016-77148-C2-1-R (AEI/FEDER, UE)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

User grouping and resource allocation in multiuser MIMO systems under SWIPT

  • Rubio López, Javier
  • Pascual Iserte, Antonio
This paper considers a broadcast multiple-input multiple-output (MIMO) network with multiple users and simultaneous wireless information and power transfer (SWIPT). In this scenario, it is assumed that some users are able to harvest power from radio frequency (RF) signals to recharge batteries through wireless power transfer from the transmitter, while others are served simultaneously with data transmission. The criterion driving the optimization and design of the system is based on the weighted sum rate for the users being served with data. At the same time, constraints stating minimum per-user harvested powers are included in the optimization problem. This paper derives the structure of the optimal transmit covariance matrices in the case where both types of users are present simultaneously in the network, particularizing the results to the cases where either only harvesting nodes or only information users are to be served. The trade-off between the achieved weighted sum rate and the powers harvested by the user terminals is analyzed and evaluated using the rate-power (R-P) region. Finally, we propose a two-stage user grouping mechanism that decides which users should be scheduled to receive information and which users should be configured to harvest energy from the RF signals in each particular scheduling period, this being one of the main contributions of this paper., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

On the coordination of base stations in ultra dense cellular networks

  • Aravanis, Alexios
  • Muñoz Medina, Olga
  • Pascual Iserte, Antonio
  • di Renzo, Marco
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Ultra dense networks (UDNs) allow for efficient spatial reuse of the spectrum, giving rise to substantial capacity and power gains. However, recent findings have demonstrated that the reduction of inter-site distances after a certain threshold, has a detrimental effect on the network performance. In such cases, interference mitigation strategies to counteract the effect of primarily the line of sight (LOS) interference are imperative. In this course, the present paper investigates a minimum coordination strategy among immediate neighbors. The adopted scheme realizes the interference mitigation objective, enhancing system capacity, while being implementable in practice. Building upon this scheme, the present paper provides tractable closed form expressions for the downlink (DL) ergodic capacity of a reference user under the examined coordination scheme. The analysis is performed for a scenario consisting of base stations (BSs) whose positions follow a Poisson point process of a given spatial density. The tractability and accuracy of the derived expressions renders them ideal for quantifying the performance of additional coordination strategies and for revealing trends in complex optimization problems. Thus, constituting a valuable tool for network operators, toward assessing different interference mitigation techniques and coordination schemes in UDNs., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Energy efficient transmit-receive spatial modulation for uplink-downlink large-scale MIMO systems

  • Raafat Hosny Mohamed Fahm, Ahmed
  • Yüzgeçcioglu, Merve
  • Zahid Aslam, Mohammed
  • Agustín de Dios, Adrián
  • Vidal Manzano, José
  • Jorswieck, Eduard Axel
  • Corre, Yoann
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Energy efficient spatial modulation-aided uplink and downlink designs for future millimeterwave (mmWave) large-scale multiple-input multiple-output (MIMO) systems are considered. Two novel uplink transceivers are proposed with the aim of considerably reducing the energy consumption at the user terminal, while achieving high spectral efficiency both in uplink and downlink transmissions. System performance is investigated using both stochastic and deterministic channels emulating real world urban scenarios., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A service-constrained positioning strategy for an autonomous fleet of airborne base stations

  • José Torra, Ferran
  • Pascual Iserte, Antonio
  • Vidal Manzano, José
This paper proposes a positioning strategy for a fleet of unmanned aerial vehicles (UAVs) airlifting wireless base stations driven by communication constraints. First, two schedulers that model the distribution of resources among users within a single cell are analyzed. Then, an UAV autonomous positioning strategy is developed, based on a fair distribution of the radio resources among all the users of all the cells in a given scenario, in such a way that the user bitrate is the same regardless the users’ distribution and spatial density. Moreover, two realistic constraints are added related to capacity of the backhaul link among the UAVs and the ground station: the bitrate delivered per UAV and the total backhaul bandwidth shared among all the UAVs. Additionally, an energy consumption model is considered to evaluate the efficiency and viability of the proposed strategy. Finally, numerical results in different scenarios are provided to assess both the schedulers performance and the proposed coordinated positioning strategy for the UAVs., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Analysis of blocking in mmWave cellular systems: Characterization of the LOS and NLOS intervals in urban scenarios

  • García Ruiz, Cristian
  • Pascual Iserte, Antonio
  • Muñoz Medina, Olga
In the millimeter waves (mmWave) bands considered for 5G and beyond, the use of very high frequencies results in the interruption of communication whenever there is no line of sight between the transmitter and the receiver. Blockages have been modeled in the literature so far using tools such as stochastic geometry and random shape theory. Using these tools, in this paper, we characterize the lengths of the segments in line-of-sight (LOS) and in non-line-of-sight (NLOS) statistically in an urban scenario where buildings (with random positions, lengths, and heights) are deployed in parallel directions configuring streets., This work has been funded through the projects 5G&B-RUNNER-UPC (Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional, TEC2016-77148-C2-1-R / AEI/FEDER, UE) and ROUTE56 (Agencia Estatal de Investigacion, PID2019-104945GB-I00 / AEI / 10.13039/501100011033); and the grant 2017 SGR 578 (AGAUR, Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

User association strategies in HetNets leading to rate balancing under energy constraints

  • Rubio López, Javier
  • Pascual Iserte, Antonio
  • Olmo Alòs, Jaume del
  • Vidal Manzano, José
This paper deals with the development of several strategies for associating users to base stations (BSs) in heterogeneous networks. These strategies are able to balance the rate among users and BSs and increase the overall network utility. Constraints related to the energy availability at BSs are considered explicitly in the design, assuming that the BSs are equipped with batteries that are recharged through energy harvesting. We develop a general association strategy, and then we present several suboptimum but less complex solutions suitable for scenarios with high mobility or deployments of BSs with low computational capabilities. We also present an implementation that is to be executed in a distributed way among users and BSs without the need of having a central entity gathering all the information. The performance of the proposed strategies is evaluated through simulations in terms of rate balancing and the effect of the energy harvesting capabilities on the network throughput is shown. We also compare the proposed strategies with the traditional max-SINR user association approach., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Unsupervised ensemble classification with correlated decision agents

  • Cabrera-Bean, Margarita
  • Pagès Zamora, Alba Maria
  • Diaz Vilor, Carles
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Decision-making procedures when a set of individual binary labels is processed to produce a unique joint decision can be approached modeling the individual labels as multivariate independent Bernoulli random variables. This probabilistic model allows an unsupervised solution using EM-based algorithms, which basically estimate the distribution model parameters and take a joint decision using a Maximum a Posteriori criterion. These methods usually assume that individual decision agents are conditionally independent, an assumption that might not hold in practical setups. Therefore, in this work we formulate and solve the decision-making problem using an EM-based approach but assuming correlated decision agents. Improved performance is obtained on synthetic and real datasets, compared to classical and state-of-the-art algorithms., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Cooperative linear precoding for multi-user MISO visible light communications

  • Viñals Terrés, Roser
  • Muñoz Medina, Olga
  • Agustín de Dios, Adrián
  • Vidal Manzano, José
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper develops and evaluates precoding techniques for coordinated joint transmission in visible light communications (VLC). A multi-user multiple-input single-output (MISO) setup is adopted. Transmitters are equipped with light emitting diode (LED) arrays, while receivers incorporate a single photodetector (PD). We design zero forcing (ZF) linear precoders considering, as figure of merit, the weighted sumrate for multilevel pulse amplitude modulation (PAM) and take into account the optical power constraints. We present two approaches. First, we formulate the design as a convex optimization problem and find its exact solution. Second, by considering certain approximations, we find an alternative precoder that despite being suboptimal can be computed in an almost closed-form, achieving a good trade-off between performance and complexity. Finally, we demonstrate that the proposed approaches largely outperform the conventional pseudo-inverse precoding and single-user TDMA approaches, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Downlink multi-user massive MIMO transmission using receive spatial modulation

  • Raafat Hosny Mohamed Fahm, Ahmed
  • Agustín de Dios, Adrián
  • Vidal Manzano, José
In this paper, we consider the downlink of a multi-user multiple-input-multiple-output system operating at the millimeter wave band in an outdoor environment. In this band, receive spatial modulation (RSM) schemes have been shown to achieve good spectral efficiency-energy consumption trade-off for the single-user case by exploiting new transceiver architectures that use a single radio-frequency (RF) chain at the user terminal (UT). In this work, we propose a novel RSM scheme for multiple RF chains at the UT. With the goal of maximizing the spectral efficiency (SE), we consider analog switches at the UT that select which antennas are active. To minimize the power consumption at the BS, we include analog switches that control the ON/OFF status of RF chains such that the SE is higher than a given threshold. Moreover, we extend the RSM concept to multiple users transmission. Specifically, we propose an algorithm that jointly optimizes the number of users, set of antennas and transmit power allocated to each user to maximize the sum SE. Simulation results show that RSM outperforms conventional modulation (no spatial symbols are transmitted) in terms of spectral and energy efficiency. Moreover, the proposed algorithms tightly approach the exhaustive search and outperform the prior art in terms of performance and convergence., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme through the Marie Sklodowzka-Curie under Grant 641985, in part by the Project 5G&B RUNNER-UPC (AEI/FEDER, UE) under Grant TEC2016-77148-C2-1-R, and in part by the Catalan Government under Grant 2017 SGR 578-AGAUR., Peer Reviewed, Postprint (author's final draft)