Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 87
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Combining SfM Photogrammetry and Terrestrial Laser Scanning to Assess Event-Scale Sediment Budgets along a Gravel-Bed Ephemeral Stream

  • Conesa-García, Carmelo
  • Puig-Mengual, Carlos
  • Riquelme, Adrián
  • Tomás, Roberto
  • García-Lorenzo, Rafael
  • Pastor, José L.
  • Pérez-Cutillas, Pedro
  • Cano Gonzalez, Miguel
  • Martinez-Capel, Francisco|||0000-0003-4991-0251
[EN] Stream power represents the rate of energy expenditure along a stream reach and can be calculated using topographic data acquired via structure-from-motion (SfM) photogrammetry and terrestrial laser scanning (TLS). This study sought to quantitatively relate morphological adjustments in the Azohia Rambla, a gravel-bed ephemeral stream in southeastern Spain, to stream power (omega), critical power (omega(c)), and energy gradients ( partial differential omega/ partial differential s), along different reference channel reaches of 200 to 300 m in length. High-resolution digital terrain models (HRDTMs), combined with ortophotographs and point clouds from 2018, 2019, and 2020, and ground-based surveys, were used to estimate the spatial variability of morphological sediment budgets and to assess channel bed mobility during the study period at different spatial scales: reference channel reaches (RCRs), pilot bed survey areas (PBSAs), and representative geomorphic units (RGUs). The optimized complementary role of the SfM technique and terrestrial laser scanning allowed the generation of accurate and reliable HRDTMs, upon which a 1-D hydrodynamic model was calibrated and sediment budgets calculated. The resulting high-resolution maps allowed a spatially explicit analysis of stream power and transport efficiency in relation to volumes of erosion and deposition in the RCR and PBSA. In addition, net incision or downcutting and vertical sedimentary accretion were monitored for each flood event in relation to bedforms and hydraulic variables. Sediment sources and sinks and bed armoring processes showed different trends according to the critical energy and stream power gradient, which were verified from field observations. During flows exceeding bankfull discharges (between 18 and 24 m(3) s(-1) according to channel reach), significant variations in partial differential omega/ partial differential s values and omega/omega(c) ratios (e.g., -15 < partial differential omega/ partial differential s < 15 Wm(-3); omega/omega(c) > 2 for a peak discharge of 31 m(3) s(-1)) were associated with a large amount of bedload mobilized upstream and vertical accretion along the middle reach (average rise height of 0.20 to 0.35 m for the same event). By contrast, more moderate peak flows (<= 10 m(3) s(-1)) only produced minor changes resulting in surface washing, selective transport, and local bed scouring., This research was funded by ERDF/Spanish Ministry of Science, Innovation and Universities-State Research Agency/Project CGL2017-84625-C2-1-R (CCAMICEM); State Program for Research, Development and Innovation Focused on the Challenges of Society, the Spanish Ministry of Economy and Competitiveness (MINECO) and EU FEDER under Project TEC2017-85244-C2-1-P and by the University of Alicante (vigrob-157 and GRE18-05).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Remote Sensing and UAVs for the Geomorphological and Habitat Analysis in Ephemeral and Permanent Mediterranean Streams

  • Puig Mengual, Carlos Antonio
[ES] Los ecosistemas riparios presentan una gran variabilidad, desde un punto de vista geomorfológico como hidrológico y ecológico, incluyendo las complejas interacciones que la morfología y la vegetación de ribera puede presentar. La vegetación se presenta como un factor físico muy influyente en los sistemas fluviales, con una relación directa en los procesos geomorfológicos que tienen lugar en los corredores fluviales. La detección, monitoreo y evaluación de los procesos que se desarrollan en el espacio ripario son clave a la hora de poder entender las funciones ecológicas y el desarrollo de dichos hábitats, y por tanto para tomar decisiones para su conservación y restauración. Según la distribución de especies y los rasgos de las plantas, las comunidades vegetales y su dinámica presentan distintas características en el ecosistema ripario, a las cuales los métodos de detección y monitoreo deben adaptarse. Los constantes cambios que sufren estos espacios a lo largo del tiempo se deben en gran parte a procesos físicos relacionados con las dinámicas de erosión y sedimentación, las variaciones de la trayectoria del cauce, variaciones en la distribución de especies y vegetación en el bosque de ribera, etc., pero también se deben al impacto antropogénico, que puede llegar a generar grandes desajustes en la dinámica ecológica de los ecosistemas en cuestión. Debido a las interacciones de diversos procesos y alteraciones antropogénicas, y las complejas dinámicas espacio-temporales, resulta necesario continuar desarrollando metodologías teóricas y prácticas para la monitorización y caracterización de estos ecosistemas. La teledetección, incluyendo el uso de drones, se presenta como una herramienta muy interesante y óptima para el mapeo y recogida de información en estos espacios naturales. Los beneficios que demuestran las aeronaves no tripuladas -UAV- incluyen las mejoras en la resolución espacial y temporal de los datos capturados, así como la cartografía de áreas extensas en poco tiempo, lo que los convierte en instrumentos clave en tareas de gestión y conservación de los espacios riparios. La necesidad de estudiar la dinámica geomorfológica que se produce en los cauces fluviales ha sido la principal motivación en los estudios que se presentan en esta tesis doctoral. Los capítulos 2 y 3 se basan en técnicas de captura de datos con láser escáner terrestre (TLS) y en el modelado de los datos obtenidos en vuelos fotogramétricos de UAV. Con ellos se han caracterizado los procesos que tienen lugar en una cierta área de estudio, un cauce efímero del sureste de la Península Ibérica, la Rambla de la Azohía (Murcia). Estos estudios también han permitido comparar el ajuste y precisión de los datos capturados a partir de dos técnicas distintas. Además, el interés en caracterizar los cauces fluviales con un flujo permanente ha motivado el estudio de la topografía sumergida en un tramo de río, segmentado por tipos de mesohábitat. Así pues, el capítulo 4 presenta un algoritmo y una herramienta de corrección para el efecto de la refracción en un tramo del rio Palancia (Castellón), para llevar a cabo la correcta representación de la morfología del lecho sumergido. A partir de la metodología planteada y el algoritmo desarrollado, es posible minimizar los efectos de distorsión debidos a la presencia del agua, para obtener la reconstrucción tridimensional del lecho a partir de imágenes tomadas con UAV. La construcción del modelo 3D se llevó a cabo mediante la técnica de Structure from Motion. Finalmente, y como elemento clave en la dinámica de los ecosistemas riparios, el capítulo 5 desarrolla una metodología para clasificar las fases de sucesión de la vegetación del bosque ripario. Dichas fases de sucesión se basan en la metodología del proyecto RIPFLOW, que también está implementada en el modelo dinámico CASiMiR-vegetation., [CA] Els ecosistemes riparis presenten una gran variabilitat, des d'un punt de vista geomorfològic com a hidrològic i ecològic, incloent les complexes interaccions que la morfologia i la vegetació de ribera pot presentar. La vegetació es presenta com un factor físic molt influent en els sistemes fluvials, amb una relació directa en els processos geomorfològics que tenen lloc en els corredors fluvials. La detecció, monitoratge i avaluació dels processos que es desenvolupen en l'espai ripari són clau a l'hora de poder entendre les funcions ecològiques i el desenvolupament d'aquests hàbitats, i per tant per a prendre decisions per a la seua conservació i restauració. Segons la distribució d'espècies i els trets de les plantes, les comunitats vegetals i la seua dinàmica presenten diferents característiques en l'ecosistema ripario, a les quals els mètodes de detecció i monitoratge han d'adaptar-se. Els constants canvis que pateixen aquests espais al llarg del temps es deuen en gran part a processos físics relacionats amb les dinàmiques d'erosió i sedimentació, les variacions de la trajectòria del llit, variacions en la distribució d'espècies i vegetació en el bosc de ribera, etc., però també es deuen a l'impacte antropogènic, que pot arribar a generar grans desajustaments en la dinàmica ecològica dels ecosistemes en qüestió. A causa de les interaccions de diversos processos i alteracions antropogèniques, i les complexes dinàmiques espaciotemporals, resulta necessari continuar desenvolupant metodologies teòriques i pràctiques per al monitoratge i caracterització d'aquests ecosistemes. La teledetecció, incloent l'ús de drons, es presenta com una eina molt interessant i òptima per al mapatge i recollida d'informació en aquests espais naturals. Els beneficis que demostren les aeronaus no tripulades -UAV- inclouen les millores en la resolució espacial i temporal de les dades capturades, així com la cartografia d'àrees extenses en poc temps, la qual cosa els converteix en instruments clau en tasques de gestió i conservació dels espais riparis. La necessitat d'estudiar la dinàmica geomorfològica que es produeix en els llits fluvials ha sigut la principal motivació en els estudis que es presenten en aquesta tesi doctoral. Els capítols 2 i 3 es basen en tècniques de captura de dades amb làser escàner terrestre (TLS) i en el modelatge de les dades obtingudes en vols fotogramètrics de UAV. Amb ells s'han caracteritzat els processos que tenen lloc en una certa àrea d'estudi, un llit efímer del sud-est de la Península Ibèrica, la Rambla de la Azohía (Múrcia). Aquests estudis també han permés comparar l'ajust i precisió de les dades capturades a partir de dues tècniques diferents. A més, l'interés a caracteritzar els llits fluvials amb un flux permanent ha motivat l'estudi de la topografia submergida en un tram de riu, segmentat per tipus de mesohábitat. Així doncs, el capítol 4 presenta un algorisme i una eina de correcció per a l'efecte de la refracció en un tram del va riure Palància (Castelló), per a dur a terme la correcta representació de la morfologia del llit submergit. A partir de la metodologia plantejada i l'algorisme desenvolupat, és possible minimitzar els efectes de distorsió deguts a la presència de l'aigua, per a obtindre la reconstrucció tridimensional del llit a partir d'imatges preses amb UAV. La construcció del model 3D es va dur a terme mitjançant la tècnica de Structure from Motion. Finalment, i com a element clau en la dinàmica dels ecosistemes riparis, el capítol 5 desenvolupa una metodologia per a classificar les fases de successió de la vegetació del bosc ripari. Aquestes fases de successió es basen en la metodologia del projecte RIPFLOW, que també està implementada en el model dinàmic CASiMiR-vegetation., [EN] Riparian ecosystems show great variability, from a geomorphological, hydrological and ecological point of view, including the complex interactions that riparian morphology and vegetation can present. Vegetation appears as a very influential physical factor in river systems, with a direct relationship in the geomorphological processes that take place in river corridors. The detection, monitoring and evaluation of the processes that take place in the riparian space are key when it comes to understanding the ecological functions and development of these habitats, and therefore for making decisions for their conservation and restoration. According to the distribution of species and plant traits, plant communities and their dynamics present different characteristics in the riparian ecosystem, to which detection and monitoring methods must be adapted. The constant changes that these spaces undergo over time are largely due to physical processes related to the dynamics of erosion and sedimentation, variations in the path of the channel, variations in the distribution of species and vegetation in the riparian forest, etc. These processes also are due to the anthropogenic impact, which can generate major imbalances in the ecological dynamics of the ecosystems in question. Due to the interactions of various anthropogenic processes and alterations, and the complex spatio-temporal dynamics, it is necessary to continue developing theoretical and practical methodologies for the monitoring and characterization of these ecosystems. Remote sensing, including the use of drones, is presented as a very interesting and optimal tool for mapping and collecting information in these natural spaces. The benefits demonstrated by unmanned aircraft -UAV- include improvements in the spatial and temporal resolution of the captured data, as well as the mapping of large areas in a short time, which makes them key instruments in the management and conservation tasks of riparian spaces. The need to study the geomorphological dynamics that occur in river channels has been the main motivation in the studies presented in this doctoral thesis. Chapters 2 and 3 are based on ground-based laser scanner (TLS) data capture techniques and modelling of UAV photogrammetric flight data. They have characterized the processes that take place in a certain study area, an ephemeral riverbed in the southeast of the Iberian Peninsula, the Rambla de la Azohía (Murcia). These studies have also made it possible to compare the fit and precision of the data captured from two different techniques. In addition, the interest in characterizing the fluvial channels with a permanent flow has motivated the study of the submerged topography in a stretch of river, segmented by types of mesohabitat. Thus, chapter 4 presents an algorithm and a correction tool for the effect of refraction in a stretch of the Palancia river (Castellón), to carry out the correct representation of the submerged bed morphology. From the proposed methodology and the developed algorithm, it is possible to minimize the distortion effects due to the presence of water, to obtain the three-dimensional reconstruction of the bed from images taken with UAVs. The construction of the 3D model was carried out using the Structure from Motion technique. Finally, and as a key element in the dynamics of riparian ecosystems, chapter 5 develops a methodology to classify the phases of succession of riparian forest vegetation. These succession phases are based on the RIPFLOW project methodology, which is also implemented in the dynamic CASiMiR-vegetation model., Agradezco a Francisca Segura y a Carles Sanchis por su ayuda y trabajo conjunto en el proyecto “Natural and anthropogenic changes in Mediterranean river drainage basins: historical impacts on rivers morphology, sedimentary flows and vegetation” financiado por el Ministerio de Economía y Competitividad (MINECO) (CGL2013-44917-R). Agradezco también a la Universidad de Murcia y la Universidad de Alicante así como al proyecto de investigación “Respuesta morfológica y sistémica al cambio climático en cauces efímeros mediterráneos: dinámica, resiliencia y propuestas de actuación” funded by ERDF/Spanish Ministry of Science, Innovation and Universities—State Research Agency/Project CGL2017-84625-C2-1-R (CCAMICEM); State Program for Research, Development and Innovation Focused on the Challenges of Society, del Ministerio de Economía y Competitividad (MINECO) y EU FEDER (Project TEC2017- 85244-C2-1-P) y de la Universidad de Alicante (vigrob-157 and GRE18-05).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluación de la estabilidad de taludes rocosos a partir de nubes de puntos 3D obtenidas con un vehículo aéreo no tripulado, Evaluation of the stability of rocky slopes using 3D point clouds obtained from an unmanned aerial vehicle

  • Tomás, R.
  • Riquelme, A.
  • Cano, M.
  • Pastor, J. L.
  • Pagán, J. I.
  • Asensio, J. L.
  • Ruffo, M.
[ES] En este trabajo se describe una metodología propuesta para la identificación semiautomática de discontinuidades y el posterior análisis cinemático y de estabilidad a través de su aplicación a una trinchera excavada en roca de una línea de ferrocarril. La adquisición de imágenes se ha llevado a cabo mediante un vehículo aéreo no tripulado de seis rotores para su posterior restitución fotogramétrica a través de la técnica digital Structure from Motion (SfM) mediante el programa Agisoft Metashape que proporciona una nube de puntos 3D. A partir de esta nube de puntos, se han identificado cuatro familias de discontinuidades (J1, J2, J3 y J4) que afectan al talud haciendo uso del programa de código abierto Discontinuity Set Extractor (DSE). Finalmente, se han llevado a cabo análisis cinemáticos y de estabilidad de las posibles roturas de bloques a favor de las discontinuidades identificadas en el talud. Los resultados muestran tres potenciales roturas por cuña y una plana que han sido validadas cualitativamente mediante el análisis de la geometría de las nubes de puntos., [EN] In this work, a methodology proposed for the semiautomatic identification of discontinuities and the later kinematic and stability analyses is described through its application to a rocky railway line cutting. Image acquisition has been performed using a six-rotors unmanned aerial vehicle for their subsequent photogrammetric restitution by means of the digital technique Structure from Motion (SfM) by means of the software Agisoft Metashape that provides a 3D point cloud. From this 3D point cloud, four discontinuity sets (J1, J2, J3 and J4) affecting the cutting have been identified using the open source software Discontinuity Set Extractor (DSE). Finally, kinematic and stability analyses of the potential block failures controlled by the discontinuities identified in the cutting. The results show three potential wedge and planar failures that have been qualitatively validated trough the geometric analysis of the 3D point cloud., Este trabajo se ha realizado en el marco del proyecto MOMIT, recibiendo financiación de Shift2Rail Joint Undertaking perteneciente al programa de investigación e innovación H2020 de la Unión Europea a través de la subvención No 777630, del proyecto de la Universidad de Alicante GRE18-05 y del proyecto TEC2017-85244-C2-1-P del Ministerio de Economía y Competitividad (MINECO) y EU FEDER. Los autores quieren dar las gracias a José Miguel García Torres (Geotor S.L.) por la fotografía del UAV incluida en la Figura 1.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Extraction of discontinuity sets of rocky slopes using iPhone-12 derived 3DPC and comparison to TLS and SfM datasets

  • Riquelme, Adrián
  • Tomás, Roberto
  • Cano, Miguel
  • Pastor Navarro, José Luis
  • Jordá Bordehore, Luis
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Characterisation of a rock mass requires data from the intact rock along with the discontinuities. Assuming that the discontinuities are planar, its characterisation requires its number and orientation. This leads to the analysis of the normal spacing, the persistence and the roughness, among others. The geometrical analysis of the surface enables the calculation of the parameters to characterise the discontinuities, and the use of digital datasets enhance them. Remote sensing techniques, such as the Terrestrial Laser Scanning (TLS) instruments of Structure from Motion (SfM) technique, provide 3D point clouds that enable the geometrical analysis. The scientific community has been testing both techniques since the 2000s, and companies are introducing their use in their workflows. However, the cost of the TLS instrument could still be a barrier to its use to most scholars. Because of this, the community shows a growing interest in Remotely Piloted Aircraft Systems (RPAS) equipped with digital cameras or in smartphones equipped with high-quality cameras to capture digital datasets of rocky slopes. The SfM workflow processes the captured images, reconstructing the rocky slope through a 3D point cloud and textured meshes. Although previous studies show that the SfM-derived point clouds present less quality than TLS-derived datasets in terms of accuracy, the use of SfM is still of interest because of its cost. In 2020 Apple launched the Iphone-12 device, which is equipped with a LiDAR sensor that is not used to capture the surface coordinates but to enhance the photo's quality. Since then, the community has developed several applications to reconstruct 3D surfaces using this device. This leads to consider this device as an intermediate option between the TLS and SfM to characterise rocky slopes and their discontinuities. In this communication we explore the digitalisation of a rocky slope via TLS instruments, SfM technique and using the Iphone-12 device. It comprises a 26 meter high mechanically excavated rocky slope in Cretaceous marlstones and limestones. To capture the surface, we used three configurations, and we found that to scan ground surface the distance device-surface had to be less than 3 meters. The discontinuities are characterised using the three sources of information using the DSE software. The results show a promising match compared to the TLS or SfM. This evidences that these devices will soon be widely employed for evaluating rocky slopes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Digital 3D Rocks: A Collaborative Benchmark for Learning Rocks Recognition

  • Riquelme, Adrián
  • Cano, Miguel
  • Tomás, Roberto
  • Jordá Bordehore, Luis
  • Pastor Navarro, José Luis
  • Benavente, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Naked eye rock recognition is an essential activity for professionals and students of geosciences, architecture and engineering. Through a hand holding rock specimen, it is usually required not only to identify the type of rock but recognize their texture and understand its expected properties mechanical and petrophysical properties. Although a wide choice of books, websites and apps are available in the literature and on the Internet, their contents are two-dimensional (2D) and static. Nowadays, the application of remote sensing techniques such as Light Detection and Ranging (LiDAR) or Structure from Motion (SfM) enable the generation of three-dimensional (3D) interactive models, which are here presented as a novel perspective of learning and practising rocks recognition. Despite limitations of the technique, 3D digital models of rocks permit their virtual visualization and manipulation to reveal parts of the specimens that are hidden in the 2D photograph, as well as details of the rock specimen’s texture such as grain and minerals size, distribution and organization along with the possibility of identifying petrological features, foliation, mineral orientations and others. This provides a novel perspective of learning and practising rocks identification. Herein, a benchmark of digital rocks collected all around the world and generated using SfM technique is presented. The rocks are organised using a straightforward classification system based on the texture jointly with a detailed description to aid the specimen recognition. A behavioural geomechanical classification is then applied. Moreover, a linked datasheet shows the engineering classification, the weathering degree, the guide physical and mechanical properties (general, and specific when available), the engineering uses and others. The information is organised on an open-access website hosted by the University of Alicante (https://web.ua.es/digitalrocks). This initiative also aims to encourage students and professionals to generate their own models and to provide the description to enlarge the repository.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Sensitivity Analysis of Sentinel-1 Backscatter to Oil Palm Plantations at Pluriannual Scale: A Case Study in Gabon, Africa

  • Ballester-Berman, J. David
  • Rastoll-Gimenez, Maria
  • Ballester-Berman, J. David|||/items/a6960cca-2ad9-4d2b-ab77-465bf799fba8
The present paper focuses on a sensitivity analysis of Sentinel-1 backscattering signatures from oil palm canopies cultivated in Gabon, Africa. We employed one Sentinel-1 image per year during the 2015–2021 period creating two separated time series for both the wet and dry seasons. The first images were almost simultaneously acquired to the initial growth stage of oil palm plants. The VH and VV backscattering signatures were analysed in terms of their corresponding statistics for each date and compared to the ones corresponding to tropical forests. The times series for the wet season showed that, in a time interval of 2–3 years after oil palm plantation, the VV/VH ratio in oil palm parcels increases above the one for forests. Backscattering and VV/VH ratio time series for the dry season exhibit similar patterns as for the wet season but with a more stable behaviour. The separability of oil palm and forest classes was also quantitatively addressed by means of the Jeffries–Matusita distance, which seems to point to the C-band VV/VH ratio as a potential candidate for discrimination between oil palms and natural forests, although further analysis must still be carried out. In addition, issues related to the effect of the number of samples in this particular scenario were also analysed. Overall, the outcomes presented here can contribute to the understanding of the radar signatures from this scenario and to potentially improve the accuracy of mapping techniques for this type of ecosystems by using remote sensing. Nevertheless, further research is still to be done as no classification method was performed due to the lack of the required geocoded reference map. In particular, a statistical assessment of the radar signatures should be carried out to statistically characterise the observed trends.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Entering the Era of Earth Observation-Based Landslide Warning Systems: A novel and exciting framework

  • Dai, Keren
  • Li, Zhenhong
  • Xu, Qiang
  • Bürgmann, Roland
  • Milledge, David G.
  • Tomás, Roberto
  • Fan, Xuanmei
  • Zhao, Chaoying
  • Liu, Xiaojie
  • Peng, Jian-bing
  • Zhang, Qin
  • Wang, Zheng
  • Qu, Tengteng
  • He, Chaoyang
  • Li, Deren
  • Liu, Jingnan
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Landslide early warning remains a grand challenge due to the high human cost of catastrophic landslides globally and the difficulty of identifying a diverse range of landslide triggering factors. There have been only a very limited number of success stories to date. However, recent advances in earth observation (EO) from ground, aircraft and space have dramatically improved our ability to detect and monitor active landslides and a growing body of geotechnical theory suggests that prefailure behavior can provide clues to the location and timing of impending catastrophic failures. In this paper, we use two recent landslides in China as case studies, to demonstrate that (i) satellite radar observations can be used to detect deformation precursors to catastrophic landslide occurrence, and (ii) early warning can be achieved with real-time in-situ observations. A novel and exciting framework is then proposed to employ EO technologies to build an operational landslide early warning system.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Analysis and modeling of the combined effects of hydrological factors on a reservoir bank slope in the Three Gorges Reservoir area, China

  • Huang, Da
  • Luo, Shi-lin
  • Zhong, Zhu
  • Gu, Dong-Ming
  • Song, Yi-Xiang
  • Tomás, Roberto
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
More than 5000 landslides have been identified in the Three Gorges Reservoir (TGR) area since the impoundment in 2003, which posed great threats to the residential houses, transportation on the Yangtze, and dam stability. This paper focuses on the evaluation of the coupled influence of rainfall and reservoir water on deformation characteristics and failure evolution of the Outang landslide (in China) based on field investigations, a statistical Pearson cross-correlation coefficient analysis, multi-technique monitoring data, and a numerical model. This instability is a reactivated ancient landslide with a volume of approximately 90 Mm3 located in the Three Gorges Reservoir. The slope behavior is featured with a short period of fast displacement and a relatively long period of semi-constant displacement rates per hydrological year, and displacements velocities quicken gradually upslope. Rainfall and reservoir water level are the main triggering factors of slope movement existing in the upper and the lower parts of the landslide, respectively. Based on the numerical results, the failure evolution of this landslide is a compounded push-retrogression-type failure process involving: a) a first rupture at the toe caused by the reservoir water level that will rapidly mobilize a second and subsequent collapses upwards (retrogression type); and b) the rock mass at the upper part will be pushed out and failed downslope (push type) due to precipitation. These results provide a comprehensive analysis of the Outang landslide, which is critical for its management, as well as for disaster prevention and mitigation of analogous reservoir-induced landslides.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Application of the Trace Coherence to HH-VV PolInSAR TanDEM-X Data for Vegetation Height Estimation

  • Romero-Puig, Noelia
  • Marino, Armando
  • Lopez-Sanchez, Juan M.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
This article investigates, for the first time, the inclusion of the operator Trace Coherence (TrCoh) in polarimetric and interferometric synthetic aperture radar (SAR) methodologies for the estimation of biophysical parameters of vegetation. A modified inversion algorithm based on the well-known Random Volume over Ground (RVoG) model, which employs the TrCoh, is described and evaluated. In this regard, a different set of coherence extrema is used as input for the retrieval stage. In addition, the proposed methodology improves the inversion algorithm by employing analytical solutions rather than approximations. Validation is carried out exploiting single-pass HH-VV bistatic TanDEM-X data, together with reference data acquired over a paddy rice area in Spain. The added value of the TrCoh and the convenience of the use of analytical solutions are assessed by comparing with the conventional polarimetric SAR interferometry (PolInSAR) algorithm. Results demonstrate that the modified proposed methodology is computationally more effective than current methods on this dataset. For the same scene, the steps required for inversion are computed in 6 min with the conventional method, while it only takes 6 s with the proposed approach. Moreover, vegetation height estimates exhibit a higher accuracy with the proposed method in all fields under evaluation. The root-mean-squared error reached with the modified method improves by 7 cm with respect to the conventional algorithm.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Iterative Filtering Based on Adaptive Chebyshev Kernel Functions for Noise Supression in Differential SAR Interferograms

  • Mestre-Quereda, Alejandro
  • Lopez-Sanchez, Juan M.
  • Selva, Jesus
  • González, Pablo J.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Mestre-Quereda, Alejandro|||/items/2c94ed0b-7761-4a20-9cb1-8a8abedcb7c6
  • Selva, Jesus|||/items/331697ab-a206-432e-be53-f373712b34be
Differential SAR Interferometry (DInSAR) is a powerful remote sensing technique employed to monitor surface displacements, such as ground subsidence or strong deformations caused by geological activity. The quality of the interferometric phase between two combined SAR images is essential for the estimation of the surface deformation. Multi-pIe decorrelation factors may degrade the quality of the measurements and, then, the development of filtering methods for noise suppression is mandatory. In this work, we propose a new strategy to improve noise reduction while preserving the original phase structure. The new method consists in an iterative filter in which noise reduction is achieved progressively. The original phase is filtered with adaptive kernels based on Chebyshev interpolation functions. The filter is especially useful for DInSAR geophysical applications, such as earthquakes or volcanic eruptions monitoring. The performance of the proposed method has been tested with both simulated data and recently acquired Sentinel-1 SAR data which mapped the August 2016 Central Italy earthquake.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Sentinel-1 InSAR Coherence for Land Cover Mapping: A Comparison of Multiple Feature-Based Classifiers

  • Jacob, Alexander W.
  • Vicente-Guijalba, Fernando
  • Lopez-Martinez, Carlos
  • Lopez-Sanchez, Juan M.
  • Litzinger, Marius
  • Kristen, Harald
  • Mestre-Quereda, Alejandro
  • Ziółkowski, Dariusz
  • Lavalle, Marco
  • Notarnicola, Claudia
  • Suresh, Gopika
  • Antropov, Oleg
  • Ge, Shaojia
  • Praks, Jaan
  • Ban, Yifang
  • Pottier, Eric
  • Mallorquí Franquet, Jordi J.
  • Duro, Javier
  • Engdahl, Marcus E.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Mestre-Quereda, Alejandro|||/items/2c94ed0b-7761-4a20-9cb1-8a8abedcb7c6
This article investigates and demonstrates the suitability of the Sentinel-1 interferometric coherence for land cover and vegetation mapping. In addition, this study analyzes the performance of this feature along with polarization and intensity products according to different classification strategies and algorithms. Seven different classification workflows were evaluated, covering pixel- and object-based analyses, unsupervised and supervised classification, different machine-learning classifiers, and the various effects of distinct input features in the SAR domain—interferometric coherence, backscattered intensities, and polarization. All classifications followed the Corine land cover nomenclature. Three different study areas in Europe were selected during 2015 and 2016 campaigns to maximize diversity of land cover. Overall accuracies (OA), ranging from 70% to 90%, were achieved depending on the study area and methodology, considering between 9 and 15 classes. The best results were achieved in the rather flat area of Doñana wetlands National Park in Spain (OA 90%), but even the challenging alpine terrain around the city of Merano in northern Italy (OA 77%) obtained promising results. The overall potential of Sentinel-1 interferometric coherence for land cover mapping was evaluated as very good. In all cases, coherence-based results provided higher accuracies than intensity-based strategies, considering 12 days of temporal sampling of the Sentinel-1 A stack. Both coherence and intensity prove to be complementary observables, increasing the overall accuracies in a combined strategy. The accuracy is expected to increase when Sentinel-1 A/B stacks, i.e., six-day sampling, are considered.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Assessment of building behavior in slow-moving landslide-affected areas through DInSAR data and structural analysis

  • Infante, Donato
  • Di Martire, Diego
  • Confuorto, Pierluigi
  • Tessitore, Serena
  • Tomás, Roberto
  • Calcaterra, Domenico
  • Ramondini, Massimo
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Slow-moving landslides are a natural hazard which affects wide areas in the world and often are cause of significant damage to structures and infrastructures. Analysis of landslide evolution and of their interaction with existing man-made structures plays a key role in risk prevention and mitigation activities. To this purpose, a considerable interest towards innovative approaches has grown among the scientific community and land management institutions. In this work, Synthetic Aperture Radar data acquired by C-band and X-band sensors, combined with numerical analyses, have been successfully applied as a tool to detect spatial and temporal landslide-induced effects, in terms of deformations and structural behavior of a building affected by ground instability. Such approach has been applied to Moio della Civitella urban settlement (Salerno province, Italy), whose whole territory is interested by several slow-moving landslides. In detail, performance of a masonry building aggregate and the efficacy of restoration works have been investigated through an integrated assessment of displacement time-series pre- and post-repair intervention, and structural analysis performed with numerical code. Historical DInSAR data have permitted firstly the interpretation of building displacement time-series corresponding to pre- and post-works configurations; subsequently, the analysis of interpolated interferometric products has allowed to define gradient maps of vertical and horizontal displacements and to identify part of aggregate which can suffer a greater susceptibility to damage as a consequence of deformation gradients. Finally, the comparison of satellite and numerical data showed a substantial agreement with local failures and damage surveyed, thus confirming the capability of DInSAR technique to investigate building performance where no in situ displacement measurements were available.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Canopy Height Estimation in Mediterranean Forests of Spain with TanDEM-X Data

  • Gómez, Cristina
  • Lopez-Sanchez, Juan M.
  • Romero-Puig, Noelia
  • Zhu, Jianjun
  • Fu, Haiqiang
  • He, Wenjie
  • Xie, Yanzhou
  • Xie, Qinghua
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Canopy height is an essential feature in forest inventory, and for assessment of biomass and carbon budgets. Spatially explicit maps of forest height over large areas can be derived from satellite Synthetic Aperture Radar (SAR) data. We aimed to evaluate the capacity of TanDEM-X (TDX) data to assess canopy height in Mediterranean forests of Spain, which are of relatively short height (typically < 20 m), diverse in species and structure, and adapted to summer drought. Interferogram coherence was retrieved from single-pol image pairs. Forest height estimation was carried out by previously fitting a sinc-type function, with two empirical parameters, to the data measured. Six types of forest were defined to assess the convenience of stratification for model implementation. The influence of terrain slope, forest type, and interferometric baseline on model performance was evaluated, and a strategy for large area mapping was proposed and tested. TDX-derived heights were compared to a contemporaneous LiDAR-derived canopy height model for assessment of quality. Results limited to slopes below 10 degrees provided the best results, reaching R2 = 0.91 and RMSE = 1.24 m in one of the study sites. However, in some areas the results were much worse, especially in regions characterized by rugged terrain with broadleaved species. This work demonstrates the feasibility of deriving a forest height map over the entire area of Spain from TDX data. Stratification per slope interval, as well as selection of long interferometric baselines are recommended.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Assessment of rice growth conditions in a semi-arid region of India using the Generalized Radar Vegetation Index derived from RADARSAT-2 polarimetric SAR data

  • Mandal, Dipankar
  • Kumar, Vineet
  • Ratha, Debanshu
  • Lopez-Sanchez, Juan M.
  • Bhattacharya, Avik
  • McNairn, Heather
  • Rao, Yalamanchili S.
  • Ramana, K.V.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Rice growth monitoring using Synthetic Aperture Radar (SAR) is recognized as a promising approach for tracking the development of this important crop. Accurate spatio-temporal information of rice inventories is required for water resource management, production risk occurrence, and yield forecasting. This research investigates the potential of the proposed Generalized volume scattering model based Radar Vegetation Index (GRVI) for monitoring rice growth at different phenological stages. The GRVI is derived using the concept of a geodesic distance (GD) between Kennaugh matrices projected on a unit sphere. We utilized this concept of GD to quantify a similarity measure between the observed Kennaugh matrix (representation of observed Polarimetric SAR information) and the Kennaugh matrix of a generalized volume scattering model (a realization of scattering media). The similarity measure is then modulated with a factor estimated from the ratio of the minimum to the maximum GD between the observed Kennaugh matrix and the set of elementary targets: trihedral, cylinder, dihedral, and narrow dihedral. In this work, we utilize a time series of C-band quad-pol RADARSAT-2 observations over a semi-arid region in Vijayawada, India. Among the several rice cultivation practices adopted in this region, we analyze the growth stages of direct seeded rice (DSR) and conventional tansplanted rice (TR) with the GRVI and crop biophysical parameters viz., Plant Area Index – PAI. The GRVI is compared for both rice types against the Radar Vegetation Index (RVI) proposed by Kim and van Zyl. A temporal analysis of the GRVI with crop biophysical parameters at different phenological stages confirms its trend with the plant growth stages. Also, the linear regression analysis confirms that the GRVI outperforms RVI with significant correlations with PAI (r ≥ 0.83 for both DSR and TR). In addition, PAI estimations from GRVI show promising retrieval accuracy with Root Mean Square Error (RMSE) <1.05m2 m−2 and Mean Absolute Error (MAE) <0.85m2 m−2.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Time Series of Sentinel-1 Interferometric Coherence and Backscatter for Crop-Type Mapping

  • Mestre-Quereda, Alejandro
  • Lopez-Sanchez, Juan M.
  • Vicente-Guijalba, Fernando
  • Jacob, Alexander W.
  • Engdahl, Marcus E.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Mestre-Quereda, Alejandro|||/items/2c94ed0b-7761-4a20-9cb1-8a8abedcb7c6
The potential use of the interferometric coherence measured with Sentinel-1 satellites as input feature for crop classification is explored in this study. A one-year time series of Sentinel-1 images acquired over an agricultural area in Spain, in which 17 crop species are present, is exploited for this purpose. Different options regarding temporal baselines, polarisation, and combination with radiometric data (backscattering coefficient) are analysed. Results show that both radiometric and interferometric features provide notable classification accuracy when used individually (overall accuracy lies between 70% and 80%). It is found that the shortest temporal baseline coherences (6 days) and the use of all available intensity images perform best, hence proving the advantage of the 6-day revisit time provided by the Sentinel-1 constellation with respect to longer revisit times. It is also shown that dual-pol data always provide better classification results than single-pol ones. More importantly, when both coherence and backscattering coefficient are jointly used, a significant increase of accuracy is obtained (greater than 7% in overall accuracy). Individual accuracies of all crop types are increased, and an overall accuracy above 86% is reached. This proves that both features provide complementary information, and that the combination of interferometric and radiometric radar data constitute a solid information source for this application.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Towards a Physical Quantitative Assessment of Model-Based PolSAR Decompositions

  • Ballester-Berman, J. David
  • Ainsworth, Thomas L.
  • Lopez-Sanchez, Juan M.
  • Ballester-Berman, J. David|||/items/a6960cca-2ad9-4d2b-ab77-465bf799fba8
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
We claim that there still remain some open issues regarding the quantitative assessment of model-based PolSAR decomposition. The performance analysis for real data is hampered by the usual unavailability of the corresponding ground-truth data for comparison. In addition, due to modelling issues there appear some parameters whose validation and interpretation are subject to a high ambiguity, as it is the case of vegetation orientation and randomness. The questions that remain to be answered are: What is the actual role of them? Can we assign them a consistent physical interpretation or are they acting just as fitting parameters?
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Clarification of the slope mass rating parameters assisted by SMRTool, an open-source software

  • Pastor Navarro, José Luis
  • Riquelme, Adrián
  • Tomás, Roberto
  • Cano, Miguel
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Geomechanics classifications are used to perform a preliminary assessment of rock slope stability for different purposes in civil and mining engineering. Among all existing rock mass classifications, slope mass rating (SMR) is one of the most commonly used for slopes. Although SMR is a geomechanics classification applied worldwide, often some misapprehensions and inaccuracies are made when professionally and scientifically used. Nearly all these miscalculations involve the influence of slope geometry and the dip and direction of the discontinuities. These problems can be overcome by a systematic assessment of SMR, which allows users to understand and visualize the relative orientation between discontinuities and slope. To fulfil this purpose, a complete and detailed definition of the angular relationships between discontinuities and slope are included in this paper, clarifying the assessment of the SMR parameters. Additionally, a Matlab-based open-source software for SMR (SMRTool) calculation is presented, avoiding miscalculations by automating the calculations and showing the graphical representation of slope and discontinuities. Finally, a general explanation of the method for the use of SMR is reviewed, stressing the common source of errors when applying this classification. The performance, benefits and usefulness of SMRTool are also illustrated in this paper through a specific case study.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multitechnical approach for damage assessment and reinforcement of buildings located on subsiding areas: Study case of a 7-story RC building in Murcia (SE Spain)

  • Díaz Castañeda, Esteban
  • Robles Marín, Pedro
  • Tomás, Roberto
  • Díaz Castañeda, Esteban|||/items/74c6c9e7-e9d0-4fec-b740-4b57680cb6e0
  • Robles Marín, Pedro|||/items/4446ed83-11b7-4b76-88ba-ac9ae4935426
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
The work presented herein proposes a multitechnical methodology for damage assessment and reinforcement of buildings located on areas affected by land subsidence induced by water withdrawal. The proposed methodology is illustrated by a comprehensive damage assessment and subsequent reinforcement of a 7-story reinforced concrete building located in the city of Murcia (SE Spain). Construction took place in the 1980s and the building was severely damaged by differential settlements caused by land subsidence throughout time. The building suffered an important tilting, presenting maximum settlement of 260 mm and a maximum horizontal displacement at the top of the building of 177 mm, which considerably reduced its habitability and security conditions. Damage began to manifest in 1995, coinciding with an intense drought that affected the Murcia area between 1991 and 1995. Average piezometric level decreases of at least 8 m were verified, reaching 10 m in the nearby areas of the building. These piezometric level decreases caused important consolidation settlements that seriously damaged the structure of the building. The proposed multitechnical damage assessment methodology was used to characterize the causes of damage, design reinforcement actions, and carry out subsequent monitoring to guarantee the structural stability of the building.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Mapping the global threat of land subsidence

  • Herrera García, Gerardo
  • Ezquerro Martín, Pablo
  • Tomás, Roberto
  • Béjar Pizarro, Marta
  • López-Vinielles, Juan
  • Rossi, Mauro
  • Mateos, Rosa María
  • Carreón-Freyre, Dora
  • Lambert, John
  • Teatini, Pietro
  • Cabral-Cano, Enrique
  • Erkens, Gilles
  • Galloway, Devin
  • Hung, Wei-Chia
  • Kakar, Najeebullah
  • Sneed, Michelle
  • Tosi, Luigi
  • Wang, Hanmei
  • Ye, Shujun
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Subsidence, the lowering of Earth's land surface, is a potentially destructive hazard that can be caused by a wide range of natural or anthropogenic triggers but mainly results from solid or fluid mobilization underground. Subsidence due to groundwater depletion (1) is a slow and gradual process that develops on large time scales (months to years), producing progressive loss of land elevation (centimeters to decimeters per year) typically over very large areas (tens to thousands of square kilometers) and variably affects urban and agricultural areas worldwide. Subsidence permanently reduces aquifer-system storage capacity, causes earth fissures, damages buildings and civil infrastructure, and increases flood susceptibility and risk. During the next decades, global population and economic growth will continue to increase groundwater demand and accompanying groundwater depletion (2) and, when exacerbated by droughts (3), will probably increase land subsidence occurrence and related damages or impacts. To raise awareness and inform decision-making, we evaluate potential global subsidence due to groundwater depletion, a key first step toward formulating effective land-subsidence policies that are lacking in most countries worldwide.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Understanding the dynamic behaviour for the Madrid aquifer (Spain): insights from the integration of A-DInSAR and 3-D groundwater flow and geomechanical models

  • Bonì, Roberta
  • Meisina, Claudia
  • Teatini, Pietro
  • Zucca, Francesco
  • Zoccarato, Claudia
  • Franceschini, Andrea
  • Ezquerro Martín, Pablo
  • Béjar Pizarro, Marta
  • Fernández-Merodo, José Antonio
  • Guardiola-Albert, Carolina
  • Pastor Navarro, José Luis
  • Tomás, Roberto
  • Herrera García, Gerardo
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Advanced Differential Interferometric Synthetic Aperture Radar (A-DInSAR) techniques and 3-D groundwater flow and geomechanical models are integrated to improve our knowledge about the Tertiary detritic aquifer of Madrid (TDAM). In particular, the attention is focused on the Manzanares-Jarama well field, located to the northwest of Madrid, which experienced five cycles of extensive groundwater withdrawal followed by natural recovery, to cope with the droughts occurred in summer 1995, 1999, 2002, 2006, and 2009. Piezometric records and A-DInSAR data acquired by ERS-1/2 and ENVISAT satellites during the periods 1992–2000 and 2002–2010, respectively, have been used to calibrate the groundwater flow and the geomechanical models. A time-lag of about one month between the hydraulic head changes and the displacements of the land surface has been detected by a joint wavelet analysis of A-DInSAR and piezometer head time series. Overall, the results show the effectiveness of the proposed integrated approach composed of A-DInSAR and 3-D geomechanical model to characterize the aquifer-system response during and after the groundwater withdrawal.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Impact of water on peak and residual shear strength parameters and triaxial deformability of high-porosity building calcarenite stones: Interconnection with their physical and petrological characteristics

  • Rabat, Álvaro
  • Tomás, Roberto
  • Cano, Miguel
  • Miranda, Tiago
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Several studies have found that water can cause substantial reductions of mechanical properties of building stones such as unconfined compressive strength, tangent Young’s modulus or tensile strength. However, the influence of water content on shear strength parameters, triaxial compressive strength and modulus of elasticity under different confining pressures has been scarcely examined. For this reason, the present paper assesses the impact of water on peak and residual compressive strength and tangent Young’s modulus of three porous building geomaterials widely used in civil and architectural constructions under different confining pressure through triaxial compressive tests. Furthermore, the corresponding peak and residual shear strength parameters computed from Mohr-Coulomb (c and ϕ) and from Hoek-Brown (σci and mi) failure criteria are obtained under dry and saturated conditions. Complementary physical and petrological analyses are performed in order to understand the main causes of the effect of water observed in these rock materials. The results indicate that water causes significant reductions of peak and residual compressive strength and tangent Young’s modulus in the tested porous building stones for all the different applied confining pressures. Additionally, important changes of peak and residual shear strength parameters (c, ϕ, σci and mi) are exhibited by the studied stones when become saturated. This could be related to physicochemical changes such as the hydrolysis of quartz and silicates in crack tip region inducing subcritical crack growth (stress corrosion), the decrease of the cement quality and the deterioration of the intergranular bonds due to the dispersion or dissolution of some minerals (calcite or chlorite) and the formation of microcracks caused by the swelling of the clay minerals present in these materials when they come into contact with water.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Exploring TanDEM-X Interferometric Products for Crop-Type Mapping

  • Busquier, Mario
  • Lopez-Sanchez, Juan M.
  • Mestre-Quereda, Alejandro
  • Navarro, Elena
  • González-Dugo, María P.
  • Mateos, Luciano
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Mestre-Quereda, Alejandro|||/items/2c94ed0b-7761-4a20-9cb1-8a8abedcb7c6
The application of satellite single-pass interferometric data to crop-type mapping is demonstrated for the first time in this work. A set of nine TanDEM-X dual-pol pairs of images acquired during its science phase, from June to August 2015, is exploited for this purpose. An agricultural site located in Sevilla (Spain), composed of fields of 13 different crop species, is employed for validation. Sets of input features formed by polarimetric and interferometric observables are tested for crop classification, including single-pass coherence and repeat-pass coherence formed by consecutive images. The backscattering coefficient at HH and VV channels and the correlation between channels form the set of polarimetric features employed as a reference set upon which the added value of interferometric coherence is evaluated. The inclusion of single-pass coherence as feature improves by 2% the overall accuracy (OA) with respect to the reference case, reaching 92%. More importantly, in single-pol configurations OA increases by 10% for the HH channel and by 8% for the VV channel, reaching 87% and 88%, respectively. Repeat-pass coherence also improves the classification performance, but with final scores slightly worse than with single-pass coherence. However, it improves the individual performance of the backscattering coefficient by 6–7%. Furthermore, in products evaluated at field level the dual-pol repeat-pass coherence features provide the same score as single-pass coherence features (overall accuracy above 94%). Consequently, the contribution of interferometry, both single-pass and repeat-pass, to crop-type mapping is proved.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Estimation of RVoG Scene Parameters by Means of PolInSAR With TanDEM-X Data: Effect of the Double-Bounce Contribution

  • Romero-Puig, Noelia
  • Lopez-Sanchez, Juan M.
  • Ballester-Berman, J. David
  • Ballester-Berman, J. David|||/items/a6960cca-2ad9-4d2b-ab77-465bf799fba8
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
This article evaluates the effect of the double-bounce (DB) decorrelation term that appears in single-pass bistatic acquisitions, as in the TanDEM-X system, on the inversion of scene parameters by means of polarimetric SAR interferometry (PolInSAR). The retrieval of all scene parameters involved in the Random Volume over Ground (RVoG) model (i.e., ground topography, vegetation height, extinction, and ground-to-volume ratios) is affected by this term when the radar response from the ground is dominated by the DB. The estimation error in all these parameters is analyzed by means of simulations over a wide range of system configurations and scene variables for both agricultural crops and forest scenarios. Simulations demonstrate that the inclusion of the DB term, which complicates the inversion algorithm, is necessary for the angles of incidence shallower than 30° to achieve an estimation error below 10% in vegetation height and to avoid a significant underestimation in the ground-to-volume ratios. At steep incidences, this decorrelation term does not affect the estimation of vegetation height and ground-to-volume ratios. Regarding the extinction, this parameter is intrinsically not well estimated, since most retrieved values are close to the initial guesses employed for the optimization algorithm, regardless of the use or not of the DB decorrelation term. Finally, these findings are compared with the experimental results from the TanDEM-X data acquired over the rice fields in Spain for the available system parameters (baseline and incidence angle) of the acquired data set.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multi-Source Data Integration to Investigate a Deep-Seated Landslide Affecting a Bridge

  • Pastor Navarro, José Luis
  • Tomás, Roberto
  • Lettieri, Luca
  • Riquelme, Adrián
  • Cano, Miguel
  • Infante, Donato
  • Ramondini, Massimo
  • Di Martire, Diego
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
The integration of data from different sources can be very helpful in understanding the mechanism, the geometry, the kinematic, and the area affected by complex instabilities, especially when the available geotechnical information is limited. In this work, the suitability of different techniques for the study of a deep-seated landslide affecting a bridge in Alcoy (Spain) is evaluated. This infrastructure presents such severe damage that has rendered the bridge unusable, which prevents normal access to an important industrial area. Differential SAR Interferometry (DInSAR) and terrestrial Light Detection and Ranging (LiDAR) remote sensing techniques have been combined with ground displacement monitoring techniques, such as inclinometers and conventional geological and geotechnical investigation, electrical-seismic tomography, damage, and topographic surveys, to determine the boundaries, mechanism, and kinematics of the landslide. The successful case study that is illustrated in this work highlights the potential and the need for integrating multi-source data for the optimal management of complex landslides and the effective design of remedial measurements.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multisource data integration to investigate one century of evolution for the Agnone landslide (Molise, southern Italy)

  • Del Soldato, Matteo
  • Riquelme, Adrián
  • Bianchini, Silvia
  • Tomás, Roberto
  • Di Martire, Diego
  • De Vita, Pantaleone
  • Moretti, Sandro
  • Calcaterra, Domenico
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Landslides are one of the most relevant geohazards worldwide, causing direct and indirect costs and fatalities. Italy is one of the countries most affected by mass movements, and the Molise region, southern Italy, is known to be susceptible to erosional processes and landslides. In January 2003, a landslide in the municipality of Agnone, in the Colle Lapponi-Piano Ovetta (CL-PO) territory, occurred causing substantial damage to both structures and civil infrastructure. To investigate the evolution of the landslide-affected catchment over approximately one century, different data were taken into account: (i) literature information at the beginning of the twentieth century; (ii) historical sets of aerial optical photographs to analyse the geomorphological evolution from 1945 to 2003; (iii) SAR (Synthetic Aperture Radar) data from the ERS1/2, ENVISAT and COSMO-SkyMed satellites to monitor the displacement from 1992 to 2015; (iv) traditional measurements carried out through geological and geomorphological surveys, inclinometers and GPS campaigns to characterize the geological setting of the area; and (v) recent optical photographs of the catchment area to determine the enlargement of the landslide. Using the structure from motion technique, a 3D reconstruction of each set of historical aerial photographs was made to investigate the geomorphological evolution and to trace the boundary of the mass movements. As a result, the combination of multitemporal and multitechnique analysis of the evolution of the CL-PO landslide enabled an assessment of the landslide expansion, which resulted in a maximum length of up to approximately 1500 m. A complete investigation of the past and present deformational sequences of the area was performed to potentially plan further mitigation and prevention strategies to avoid possible reactivations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Added Value of Coherent Copolar Polarimetry at X-Band for Crop-Type Mapping

  • Busquier, Mario
  • Lopez-Sanchez, Juan M.
  • Bargiel, Damian
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
A set of six spotlight TerraSAR-X images acquired at HH and VV polarizations in 2009 over an agricultural site in Germany are employed to evaluate the potential contribution of polarimetric features derived from this copolar mode to crop-type mapping. Results show that the inclusion of the correlation between copolar channels in the set of input features of the classifier consistently improves the classification performance with respect to the use of only backscattering coefficients. An increase around 8%-10% in overall accuracy, depending on the experiment setup, is achieved. Both user and producer accuracies are improved for all crop types, being the most noticeable contribution for barley, oat, and sugar beet. Different sets of input features, as well as classification and evaluation strategies, are tested in order to assess the robustness of this contribution.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

We lose ground: Global assessment of land subsidence impact extent

  • Dinar, Ariel
  • Esteban, Encarna
  • Calvo, Elena
  • Herrera García, Gerardo
  • Teatini, Pietro
  • Tomás, Roberto
  • Li, Yang
  • Ezquerro Martín, Pablo
  • Albiac, Jose
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Depletion of groundwater aquifers along with all of the associated quality and quantity problems which affect profitability of direct agricultural and urban users and linked groundwater-ecosystems have been recognized globally. During recent years, attention has been devoted to land subsidence—the loss of land elevation that occurs in areas with certain geological characteristics associated with aquifer exploitation. Despite the large socioeconomic impacts of land subsidence most of these effects are still not well analyzed and not properly recognized and quantified globally. In this paper we developed a land subsidence impact extent (LSIE) index that is based on 10 land subsidence attributes, and applied it to 113 sites located around the world with reported land subsidence effects. We used statistical means to map physical, human, and policy variables to the regions affected by land subsidence and quantified their impact on the index. Our main findings suggest that LSIE increases between 0.1 and 6.5% by changes in natural processes, regulatory policy interventions, and groundwater usage, while holding all other variables unchanged. Effectiveness of regulatory policy interventions vary depending on the lithology of the aquifer system, in particular its stiffness. Our findings suggest also that developing countries are more prone to land subsidence due to lower performance of their existing water governance and institutions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Upgrading the prediction of jet grouting column diameter using deep learning with an emphasis on high energies

  • Díaz Castañeda, Esteban
  • Tomás, Roberto
  • Díaz Castañeda, Esteban|||/items/74c6c9e7-e9d0-4fec-b740-4b57680cb6e0
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
This article proposed a new method to estimate the diameter of jet grouting columns. The method uses the largest data collection of column diameters measured to date and includes a large amount of new data that fills the existing gap of data for high injection energies. The dataset was analysed using a deep neural network that took into account the problem’s key parameters (i.e. type of soil, soil resistance, type of jet and specific energy in the nozzle). As a result, three different neural networks were selected, one for each type of jet, according to the errors and consistency associated with each. Finally, using the trained networks, a number of design charts were developed to determine the diameter of a jet grouting column as a function of the soil properties and the jet system. These charts allow generating an optimal jet grouting design, improving the prediction of the diameter of jet columns especially in the high energy triple fluid.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Crop Monitoring by Satellite Polarimetric SAR Interferometry

  • Romero-Puig, Noelia
The agricultural sector is the backbone which supports the livelihoods and the economic development of nations across the globe. In consequence, the need for robust and continuous monitoring of agricultural crops is primordial to face the interlinked challenges of growth rate population, food security and climate change. Synthetic Aperture Radar (SAR) sensors have the powerful imaging capability of operating at almost all weather conditions, independent of day and night illumination. By penetrating through clouds and into the vegetation canopy, the incident radar signal interacts with the structural and dielectric properties of the vegetation and soil, thus providing critical information of the crop state, such as height, biomass, crop yield or leaf structure, which can help devise sustainable agricultural management practices. This is achieved by means of the Polarimetric SAR Interferometry (PolInSAR) technique, which by coherently combining interferometric SAR acquisitions at different polarization states allows for the retrieval of biophysical parameters of the vegetation. In this framework, this thesis focuses on the development of crop monitoring techniques that properly exploit satellite-based PolInSAR data. All the known InSAR and PolInSAR methodologies for this purpose have been analysed. The sensitivity of these data provided by the TanDEM-X bistatic system to both the physical parameters of the scene (height and structure of the plants, moisture and roughness of the soil) and the sensor configuration (polarization modes and observation geometry) is evaluated. The effect of different simplifications made in the physical model of the scene on the crop estimates is assessed. The interferometric sensitivity requirements to monitor a crop scenario are more demanding than others, such as forests. Steep incidences associated with the largest spatial baselines provided by the available data set lead to the most accurate estimates under all the different model assumptions. Shallower incidences, on the other hand, generally yield important errors due to their characteristic shorter spatial baselines. Through the methodologies proposed in this thesis, PolInSAR data have shown potential to refine current methods for the quantitative estimation of crop parameters. Results encourage to continue further research towards the objective of achieving operational crop monitoring applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of the Double-Bounce Contribution in PolInSAR-Based Height Estimates of Rice Crops Using TanDEM-X Bistatic Data

  • Romero-Puig, Noelia
  • Lopez-Sanchez, Juan M.
  • Ballester-Berman, J. David
  • Ballester-Berman, J. David|||/items/a6960cca-2ad9-4d2b-ab77-465bf799fba8
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
In bistatic acquisitions the presence of a double-bounce contribution at the ground affects the interferometric coherence with a decorrelation factor which is usually overlooked in studies employing polarimetric SAR interferometry. The standard acquisition mode of TanDEM-X is bistatic, so the influence of this contribution in the estimation of scene parameters (ground topography and vegetation height) is studied here. The analysis is carried out both with simulations and real data acquired over rice fields during the science phase of TanDEM-X. Results show that the error in height and topography is small when incidence angle is below 30 degrees, but may become noticeable for shallower incidences.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Dual polarimetric radar vegetation index for crop growth monitoring using sentinel-1 SAR data

  • Mandal, Dipankar
  • Kumar, Vineet
  • Ratha, Debanshu
  • Dey, Subhadip
  • Bhattacharya, Avik
  • Lopez-Sanchez, Juan M.
  • McNairn, Heather
  • Rao, Yalamanchili S.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Sentinel-1 Synthetic Aperture Radar (SAR) data have provided an unprecedented opportunity for crop monitoring due to its high revisit frequency and wide spatial coverage. The dual-pol (VV-VH) Sentinel-1 SAR data are being utilized for the European Common Agricultural Policy (CAP) as well as for other national projects, which are providing Sentinel derived information to support crop monitoring networks. Among the Earth observation products identified for agriculture monitoring, indicators of vegetation status are deemed critical by end-user communities. In literature, several experiments usually utilize the backscatter intensities to characterize crops. In this study, we have jointly utilized the scattering information in terms of the degree of polarization and the eigenvalue spectrum to derive a new vegetation index from dual-pol (DpRVI) SAR data. We assess the utility of this index as an indicator of plant growth dynamics for canola, soybean, and wheat, over a test site in Canada. A temporal analysis of DpRVI with crop biophysical variables (viz., Plant Area Index (PAI), Vegetation Water Content (VWC), and dry biomass (DB)) at different phenological stages confirms its trend with plant growth dynamics. For each crop type, the DpRVI is compared with the cross and co-pol ratio (σVH0/σVV0) and dual-pol Radar Vegetation Index (RVI = 4σVH0/(σVV0 + σVH0)), Polarimetric Radar Vegetation Index (PRVI), and the Dual Polarization SAR Vegetation Index (DPSVI). Statistical analysis with biophysical variables shows that the DpRVI outperformed the other four vegetation indices, yielding significant correlations for all three crops. Correlations between DpRVI and biophysical variables are highest for canola, with coefficients of determination (R2) of 0.79 (PAI), 0.82 (VWC), and 0.75 (DB). DpRVI had a moderate correlation (R2≳ 0.6) with the biophysical parameters of wheat and soybean. Good retrieval accuracies of crop biophysical parameters are also observed for all three crops.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Crop Height Estimation of Corn from Multi-Year RADARSAT-2 Polarimetric Observables Using Machine Learning

  • Xie, Qinghua
  • Wang, Jinfei
  • Lopez-Sanchez, Juan M.
  • Peng, Xing
  • Liao, Chunhua
  • Shang, Jiali
  • Zhu, Jianjun
  • Fu, Haqiang
  • Ballester-Berman, J. David
  • Ballester-Berman, J. David|||/items/a6960cca-2ad9-4d2b-ab77-465bf799fba8
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
This study presents a demonstration of the applicability of machine learning techniques for the retrieval of crop height in corn fields using space-borne PolSAR (Polarimetric Synthetic Aperture Radar) data. Multi-year RADARSAT-2 C-band data acquired over agricultural areas in Canada, covering the whole corn growing period, are exploited. Two popular machine learning regression methods, i.e., Random Forest Regression (RFR) and Support Vector Regression (SVR) are adopted and evaluated. A set of 27 representative polarimetric parameters are extracted from the PolSAR data and used as input features in the regression models for height estimation. Furthermore, based on the unique capability of the RFR method to determine variable importance contributing to the regression, a smaller number of polarimetric features (6 out of 27 in our study) are selected in the final regression models. Results of our study demonstrate that PolSAR observables can produce corn height estimates with root mean square error (RMSE) around 40–50 cm throughout the growth cycle. The RFR approach shows better overall accuracy in corn height estimation than the SVR method in all tests. The six selected polarimetric features by variable importance ranking can generate better results. This study provides a new perspective on the use of PolSAR data in retrieving agricultural crop height from space.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Optimal Grid-Based Filtering for Crop Phenology Estimation with Sentinel-1 SAR Data

  • Mascolo, Lucio
  • Martínez Marín, Tomás
  • Lopez-Sanchez, Juan M.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Martínez Marín, Tomás|||/items/13bcbfa7-02e3-4dbc-87a0-4efc7486838b
In the last decade, suboptimal Bayesian filtering (BF) techniques, such as Extended Kalman Filtering (EKF) and Particle Filtering (PF), have led to great interest for crop phenology monitoring with Synthetic Aperture Radar (SAR) data. In this study, a novel approach, based on the Grid-Based Filter (GBF), is proposed to estimate crop phenology. Here, phenological scales, which consist of a finite number of discrete stages, represent the one-dimensional state space, and hence GBF provides the optimal phenology estimates. Accordingly, contrarily to literature studies based on EKF and PF, no constraints are imposed on the models and the statistical distributions involved. The prediction model is defined by the transition matrix, while Kernel Density Estimation (KDE) is employed to define the observation model. The approach is applied on dense time series of dual-polarization Sentinel-1 (S1) SAR images, collected in four different years, to estimate the BBCH stages of rice crops. Results show that 0.94 ≤ R2 ≤ 0.98, 5.37 ≤ RMSE ≤ 7.9 and 20 ≤ MAE ≤ 33.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Wavelet analysis of land subsidence time-series: Madrid Tertiary aquifer case study

  • Tomás, Roberto
  • Pastor Navarro, José Luis
  • Béjar Pizarro, Marta
  • Bonì, Roberta
  • Ezquerro Martín, Pablo
  • Fernández-Merodo, José Antonio
  • Guardiola-Albert, Carolina
  • Herrera García, Gerardo
  • Meisina, Claudia
  • Teatini, Pietro
  • Zucca, Francesco
  • Zoccarato, Claudia
  • Franceschini, Andrea
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Interpretation of land subsidence time-series to understand the evolution of the phenomenon and the existing relationships between triggers and measured displacements is a great challenge. Continuous wavelet transform (CWT) is a powerful signal processing method mainly suitable for the analysis of individual nonstationary time-series. CWT expands time-series into the time-frequency space allowing identification of localized nonstationary periodicities. Complementarily, Cross Wavelet Transform (XWT) and Wavelet Coherence (WTC) methods allow the comparison of two time-series that may be expected to be related in order to identify regions in the time-frequency domain that exhibit large common cross-power and wavelet coherence, respectively, and therefore are evocative of causality. In this work we use CWT, XWT and WTC to analyze piezometric and InSAR (interferometric synthetic aperture radar) time-series from the Tertiary aquifer of Madrid (Spain) to illustrate their capabilities for interpreting land subsidence and piezometric time-series information.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Economic assessment of converting a pressurised water distribution network into an off-grid system supplied with solar photovoltaic energy

  • Chabour, Houssem Eddine
  • Pardo Picazo, Miguel Ángel
  • Riquelme, Adrián
  • Pardo Picazo, Miguel Ángel|||/items/4e2a67ff-4eec-4e38-a836-45bb184b5ef6
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
Converting a water pressurised distribution network into an off-grid pumping station supplied by solar photovoltaics represents a challenge for utility managers, user demand assessments evaluate the energy generated in a solar-powered systems to establish energy consumption. This work includes quantifying potential investments and economic savings that could be achieved, as well as the payback period which results as an indicator of the suitability of adapting to a power supply utilising solar panels. A tool (UAsolar) to aid practitioners has been developed, it requires a calibrated hydraulic model to account for the energy requirements in the water delivery process of pressurised networks. The authors encourage students, professionals, and decision-makers to use this tool to identify potential efficiency gains (e.g., delivery schedule, reduction of water use) and to synchronise energy production and consumption. Users can get results with low computational time using the software on six pressurised distribution networks. Practitioners should note that the irrigation networks have sized installations with a few photovoltaic modules, while in urban pressurised networks the results show larger installations are required. In addition, irrigation network managers can match energy demand with energy production by changing consumption over time, this could reduce the quantity of modules required and remove the need for energy storage. The payback period ranges from 6.08 to 13 years for the cases where the investment is recovered—(values that show that this investment yields a high return as the lifetime of the PV modules is 25 years). However, one municipality among those studied shows that in some scenarios it is not viable to convert networks into a standalone system.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Impact of SAR Image Resolution on Polarimetric Persistent Scatterer Interferometry With Amplitude Dispersion Optimization

  • Zhao, Feng
  • Mallorquí Franquet, Jordi J.
  • Lopez-Sanchez, Juan M.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Polarimetric persistent scatterer interferometry (PolPSI) takes advantage of polarimetric optimization algorithms that enhance interferograms' phase quality by adequately combining the available polarization channels (e.g., HH, VV, HV, and VH) into an improved one. Amplitude dispersion (DA) is one of the commonly used phase quality metrics for this optimization. The resolution of the images is supposed to have an impact on the performance of DA-based PolPSI in terms of both pixel density and quality. In this research, this impact is investigated. Specifically, 30 quad-pol RADARSAT-2 images over Barcelona with a resolution around 5 m in both range and azimuth are employed to generate additional data sets with degraded resolutions, ranging from 7.5 to 20 m. The results confirm that, in all cases, the ability of DA to select high-quality pixels, i.e., persistent scatterers, decreases when the spatial resolution worsens because the loss of resolution increases the number of scatterers present in a resolution cell. In addition, it would be expected that the performance of the polarimetric optimization of DA would tend to decrease when the spatial resolution worsens. However, for all employed resolutions, the polarimetric optimization improves the density and quality of PSs with respect to that of any single polarimetric channel. Moreover, this improvement is more noticeable, in relative terms, as the image resolution degrades.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Control of natural fractures in historical quarries via 3D point cloud analysis

  • Riquelme, Adrián
  • Martínez Martínez, Javier
  • Martin-Rojas, Ivan
  • Sarro, Roberto
  • Rabat, Álvaro
  • Martin-Rojas, Ivan|||/items/86714454-f8b8-44f6-b3e8-58bf83b5730c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
This paper applies remote sensing techniques and 3D point cloud (3DPC) analysis to the study of historical quarries and the relationship between old quarry landscapes and the natural fracture systems of rock massifs. Ancient quarry landscapes present particular characteristics and different features from those of modern quarries. Consequently, specific considerations are needed when historical extractive places are studied. The proposed method is based on terrestrial 3D laser scanners and the structure from motion technique with remotely piloted aircraft systems. Additional specific fieldwork is required to identify and characterise quarry faces from old, blurry outcrops. A case study of the 18th century “Rambla Honda” quarries in La Romana (Alicante, SE Spain) is presented. The comparison between the fieldwork and 3DPC analysis enables the numbers and orientations of both (1) the discontinuity sets within the rock mass facilitating extraction and (2) the planes resulting from block extraction (traditional quarry faces) to be determined. The comparative analysis reveals how the stonecutters managed the extraction. The results show that structural and stratigraphic discontinuities act as planes of weakness for block extraction and determine the optimum orientation of the quarry face for minimising efforts and rock waste. The final quarry landscape is formed from the superposition of natural and artificial surfaces, but currently they appear eroded and partially covered by silting and plants. The proposed methodology contributes to distinguishing both natural and artificial discontinuities and to achieving a comprehensive knowledge of these cultural places.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Reconstruction of earth fissures 3-D from videos

  • Riquelme, Adrián
  • Tomás, Roberto
  • Cano, Miguel
  • Pastor Navarro, José Luis
  • Gootee, Brian
  • Cook, Joseph P.
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Earth fissures are pervasive cracks that develop on valley floors as a consequence of land subsidence associated with extensive groundwater withdrawal. To capture geometrical, geological and geotechnical information of ground fissures is of paramount importance for their characterization. Recent advances in remote sensing techniques and the accessibility to remotely piloted aircraft systems (RPAS) as well as the evolution of onboard digital cameras enable the capture of digital photos and videos. Using digital photos along with the Structure from Motion (SfM) technique and following certain strategies, we can reconstruct a 3-D model of the earth fissures under study. This technique requires digital photos, but when a digital video is available, we can convert it into a set of frames and equally apply the procedure. Besides, the extraction of frames from a video assures a key condition for the SfM technique: the overlap between photos. The resulting 3-D model should be scaled and oriented using a rigid transformation matrix or even better including ground control points (GCP) into the captured photos or frames. The latter enables the geo-referencing of the point cloud and the correction of linear and non-linear deformations. In this work, the proposed methodology is illustrated through the application of SfM technique to a high-resolution video downloaded from YouTube (i.e. https://youtu.be/9xdAnftBKvY, last access: 20 February 2020). The video shows a mile-long earth fissure that appeared sometime between March 2014 and December 2014 near the Tator Hills (Arizona, USA) over Quaternary sediments. The Arizona Geological Survey captured these videos using an RPAS. The frames of the video were downloaded and extracted using a simple Matlab code. Then, we sub-sampled the frames and processed them using the software Agisoft Metashape Professional. Finally, we got metric data from Google Earth and generated a 3-D model. The quality of the 3-D model strongly depends on the quality of the photos and the GCP. However, this study shows the potential of this technique, instrumentation and data available on Internet for the development of 3-D point clouds and 3-D models for the detailed analysis of earth fissures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Rockfall Simulation Based on UAV Photogrammetry Data Obtained during an Emergency Declaration: Application at a Cultural Heritage Site

  • Sarro, Roberto
  • Riquelme, Adrián
  • García-Davalillo, Juan Carlos
  • Mateos, Rosa María
  • Tomás, Roberto
  • Pastor Navarro, José Luis
  • Cano, Miguel
  • Herrera García, Gerardo
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
In recent years, there was an increasing number of studies focusing on rockfalls due to their impacts on social and sustainable development. This work carries out a three-dimensional (3D) simulation of rockfalls at a cultural heritage site nearby the village of Cortes de Pallás (Valencian Community, East Spain). The simulation is based on data collected previously, during an emergency declaration due to the occurrence of a considerable rockfall (7980 m3) on the southern bank of the Cortes de Pallás reservoir, on 6 April 2015. The hydroelectric power plant was damaged, and the main access road to the village of Cortes de Pallás was blocked for eight months. The predominant discontinuities of the rock mass were analyzed by means of the application of structure from motion (SfM) photogrammetry techniques to the set of images taken by remotely piloted aircraft systems (RPAS). The average size of the block was determined as 3.2 m in diameter and 17.6 m3 in volume. Additionally, a digital elevation model (DEM) was generated from an aerial laser scanning (ALS)-derived point cloud using a 1 × 1 grid. These data were implemented in RocPro3D software, obtaining the distances traveled by the blocks detached from different source areas at a cultural heritage site located near the rockfall event, which presents the same geological context. The simulation presented herein shows aggravating circumstances that endanger the cultural heritage area, with higher rockfall hazards than previous official studies (1991) displayed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Advances in the understanding of the role of degree of saturation and water distribution in mechanical behaviour of calcarenites using magnetic resonance imaging technique

  • Rabat, Álvaro
  • Tomás, Roberto
  • Cano, Miguel
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
A thorough knowledge of the variations of mechanical properties of rock materials with their water content is essential for evaluating the structural behaviour and durability of stone constructions exposed to different moist environments during their lifetime and for solving a broad range of rock mechanics issues. In this study, the effect of degree of saturation (Sr) and water distribution inside pore network on mechanical parameters such as Uniaxial Compressive Strength, Young’s modulus, Brazilian Tensile Strength and Point Load Strength Index was assessed for three varieties of a calcarenite. To this aim, the corresponding mechanical tests and Magnetic Resonance Imaging technique were applied during different time intervals in specimens prepared with different Sr values through two different wetting procedures: (1) the oven drying of saturated samples and (2) the water immersion of dry samples. In general terms, the results showed that for small Sr values (≤50%) the specimens wetted using the drying process exhibit greater mechanical properties reductions than those moistened through the immersion process while for higher Sr values (>50%) the decreases are quite similar for both wetting procedures. As a consequence, different negative exponential functions can be used to describe the relationship between water content and mechanical parameters of calcarenites depending on the wetting procedure used. These results can be explained by the different water distributions inside the partial-saturated specimens and the main involved water-weakening mechanisms. Additionally, slightly different correlation functions between the mechanical parameters were established for specimens moistened using each of the wetting processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Evaluation of mechanical weakening of calcarenite building stones due to environmental relative humidity using the vapour equilibrium technique

  • Rabat, Álvaro
  • Tomás, Roberto
  • Cano, Miguel
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Previous studies have evaluated the water-weakening effect of rock materials after immersion in water during different periods of time. However, the water transference between the environment and the building stones frequently occurs in vapour form when changes in the relative humidity of the air involve little variations in moisture content of stones. In this sense, the novelty of this work lies in assessing the impact of the environmental relative humidity (RH) on Unconfined Compressive Strength (UCS), Young's modulus (Est), Brazilian Tensile Strength (BTS) and Point Load Strength Index (Is(50)) of three calcarenite building stones. To this aim, calcarenite specimens were exposed to five different environments with RH values ranging from 10 to 93% which were devised in laboratory through a novel modified Vapour Equilibrium Technique (VET) by using water-glycerol solutions at different concentrations and then, they were mechanically tested. The results indicated that, despite the water content (w) and the degree of saturation (Sr) inside the pore network of calcarenites were relatively small for all RH environments (w = 0.03–1.79% and Sr = 0.2–35.6%), important reductions of UCS (28.2–34.7%), Est (20.0–31.3%), BTS (17.0–41.3%) and Is(50) (23.9–37.6%) were found when the RH varied from 10 to 93%. Furthermore, negative linear relationships were established between the values of the mechanical properties and the environmental RH while negative tri-parametric exponential functions were proposed between the mechanical parameters and w. In addition, the mechanisms involved in the observed behaviour were discussed and relationships between the different mechanical properties were also proposed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multi-Temporal Quad-Polarimetric Change Matrix for Agricultural Fields Monitoring

  • Silva, Crsitian
  • Marino, Armando
  • Lopez-Sanchez, Juan M.
  • Cameron, Iain
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
In this work, a new way to extract temporal polarimetric information from a stack of co-registered images is presented. This method considers not only polarimetric evolution of consecutive acquisitions but also includes polarimetric changes between every image with respect to the rest of images in the stack. The methodology is tested for different crop types exploiting C-band quad-polarimetric RADARSAT-2 data over rice fields in Seville, South-West of Spain and the Indian Head in Canada as part of the Agrisar 2009 Campaign.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Soil moisture retrieval over agricultural fields from L-band multi-incidence and multitemporal PolSAR observations using polarimetric decomposition techniques

  • Shi, Hongtao
  • Zhao, Lingli
  • Yang, Jie
  • Lopez-Sanchez, Juan M.
  • Zhao, Jinqi
  • Sun, Weidong
  • Shi, Lei
  • Li, Pingxiang
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Surface soil moisture (SM) retrieval over agricultural areas from polarimetric synthetic aperture radar (PolSAR) has long been restricted by vegetation attenuation, simplified polarimetric scattering modelling, and limited SAR measurements. This study proposes a modified polarimetric decomposition framework to retrieve SM from multi-incidence and multitemporal PolSAR observations. The framework is constructed by combining the X-Bragg model, the extended double Fresnel scattering model and the generalised volume scattering model (GVSM). Compared with traditional decomposition models, the proposed framework considers the depolarisation of dihedral scattering and the diverse vegetation contribution. Under the assumption that SM is invariant for the PolSAR observations at two different incidence angles and that vegetation scattering does not change between two consecutive measurements, analytical parameter solutions, including the dielectric constant of soil and crop stem, can be obtained by solving multivariable nonlinear equations. The proposed framework is applied to the time series of L-band uninhabited aerial vehicle synthetic aperture radar data acquired during the Soil Moisture Active Passive Validation Experiment in 2012. In this study, we assess retrieval performance by comparing the inversion results with in-situ measurements over bean, canola, corn, soybean, wheat and winter wheat areas and comparing the different performance of SM retrieval between the GVSM and Yamaguchi volume scattering models. Given that SM estimation is inherently influenced by crop phenology and empirical parameters which are introduced in the scattering models, we also investigate the influence of surface depolarisation angle and co-pol phase difference on SM estimation. Results show that the proposed retrieval framework provides an inversion accuracy of RMSE<6.0% and a correlation of R≥0.6 with an inversion rate larger than 90%. Over wheat and winter wheat fields, a correlation of 0.8 between SM estimates and measurements is observed when the surface scattering is dominant. Specifically, stem permittivity, which is retrieved synchronously with SM also shows a linear relationship with crop biomass and plant water content over bean, corn, soybean and wheat fields. We also find that a priori knowledge of surface depolarisation angle, co-pol phase difference and adaptive volume scattering could help to improve the performance of the proposed SM retrieval framework. However, the GVSM model is still not fully adaptive because the co-pol power ratio of volume scattering is potentially influenced by ground scattering.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multitemporal Polarimetric SAR Change Detection for Crop Monitoring and Crop Type Classification

  • Silva, Crsitian
  • Marino, Armando
  • Lopez-Sanchez, Juan M.
  • Cameron, Iain
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
The interpretation of multidimensional synthetic aperture radar (SAR) data often requires expert knowledge. In fact, it requires to simultaneously consider several time series of polarimetric features to understand the physical changes of a target and its temporal evolution. In an effort to characterize the changes over time, multitemporal polarimetric SAR (MTPolSAR) change detection was introduced in the literature. However, existing methods either only exploit intensity of changes or the resulting changed scattering mechanisms are not guaranteed to represent physical changes of the target. This article presents a variation in a previously published change detector based on the difference of covariance matrices that characterize the polarimetric information, allowing for an intuitive representation and characterization of physical changes of a target and its dynamics. We show the results of this method for monitoring growth stages of rice crops and present a novel application of the method for crop type mapping from MT-PolSAR data. We compare its performance with a neural network based classifier that uses time series of PolSAR features derived from a target covariance matrix decomposition as input. Experimental results show that the classification performance of the proposed method and the baseline method are comparable with differences between the two methods in the overall balanced accuracy and the F1-macro metrics of around 2% and 3%, respectively. The method presented here achieves similar classification performances of a traditional PolSAR data classifier while providing additional advantages in terms of interpretability and insights about the physical changes of a target over time.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Vulnerability Assessment of Buildings due to Land Subsidence using InSAR Data in the Ancient Historical City of Pistoia (Italy)

  • Ezquerro Martín, Pablo
  • Del Soldato, Matteo
  • Solari, Lorenzo
  • Tomás, Roberto
  • Raspini, Federico
  • Ceccatelli, Mattia
  • Fernández-Merodo, José Antonio
  • Casagli, Nicola
  • Herrera García, Gerardo
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
The launch of the medium resolution Synthetic Aperture Radar (SAR) Sentinel-1 constellation in 2014 has allowed public and private organizations to introduce SAR interferometry (InSAR) products as a valuable option in their monitoring systems. The massive stacks of displacement data resulting from the processing of large C-B and radar images can be used to highlight temporal and spatial deformation anomalies, and their detailed analysis and postprocessing to generate operative products for final users. In this work, the wide-area mapping capability of Sentinel-1 was used in synergy with the COSMO-SkyMed high resolution SAR data to characterize ground subsidence affecting the urban fabric of the city of Pistoia (Tuscany Region, central Italy). Line of sight velocities were decomposed on vertical and E–W components, observing slight horizontal movements towards the center of the subsidence area. Vertical displacements and damage field surveys allowed for the calculation of the probability of damage depending on the displacement velocity by means of fragility curves. Finally, these data were translated to damage probability and potential loss maps. These products are useful for urban planning and geohazard management, focusing on the identification of the most hazardous areas on which to concentrate efforts and resources.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multi-Temporal Dual- and Quad-Polarimetric Synthetic Aperture Radar Data for Crop-Type Mapping

  • Valcarce-Diñeiro, Rubén
  • Arias-Pérez, Benjamín
  • Lopez-Sanchez, Juan M.
  • Sánchez, Nilda
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Land-cover monitoring is one of the core applications of remote sensing. Monitoring and mapping changes in the distribution of agricultural land covers provide a reliable source of information that helps environmental sustainability and supports agricultural policies. Synthetic Aperture Radar (SAR) can contribute considerably to this monitoring effort. The first objective of this research is to extend the use of time series of polarimetric data for land-cover classification using a decision tree classification algorithm. With this aim, RADARSAT-2 (quad-pol) and Sentinel-1 (dual-pol) data were acquired over an area of 600 km2 in central Spain. Ten polarimetric observables were derived from both datasets and seven scenarios were created with different sets of observables to evaluate a multitemporal parcel-based approach for classifying eleven land-cover types, most of which were agricultural crops. The study demonstrates that good overall accuracies, greater than 83%, were achieved for all of the different proposed scenarios and the scenario with all RADARSAT-2 polarimetric observables was the best option (89.1%). Very high accuracies were also obtained when dual-pol data from RADARSAT-2 or Sentinel-1 were used to classify the data, with overall accuracies of 87.1% and 86%, respectively. In terms of individual crop accuracy, rapeseed achieved at least 95% of a producer’s accuracy for all scenarios and that was followed by the spring cereals (wheat and barley), which achieved high producer’s accuracies (79.9%-95.3%) and user’s accuracies (85.5% and 93.7%).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Thermal effect of high temperatures on the physical and mechanical properties of a granite used in the UNESCO World Heritage of the north of Portugal

  • Tomás, Roberto
  • Cano, Miguel
  • Pulgarín Canaval, Luis Fernando
  • Brotons, Vicente
  • Benavente, David
  • Miranda, Tiago
  • Vasconcelos, Graça
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
This work discusses the results from a set of physical and mechanical test conducted on 46 cubic samples of a granite from the north of Portugal widely used in local granite-built UNESCO World Heritage, heated in a furnace at temperatures ranging from 105 to 700º C and cooled under different conditions. Then, the obtained results are compared with an extensive database of published case studies, showing that porosity, unit weight, ultrasonic waves velocities, elastic modulus and uniaxial compressive stress variations are mostly related to the induced thermal-stress caused by the anisotropic thermal expansion of the mineral grains. Only mineralogy and specific gravity do not exhibit changes for the studied range of temperatures. For specimens heated to above 500ºC, degradation processes predominate due to alpha-beta phase transition in quartz grains, considerably increasing the linear crack density, length and width and reducing the rock properties. Regarding the influence of the cooling method, thermal effects are amplified when cooling is performed by water immersion because of the inhomogeneous shrinkage and the subsequent tension stress between adjacent particles due to temperature decrease that develop at different pace within the samples. Scanning electron microscopy confirms the increase of damage and the negative effect on the granite properties caused by thermal treatment from 500ºC and by water cooling. For temperatures lower than 500ºC a hardening effect slightly improving elastic modulus and uniaxial compressive strength is observed in slowly and quickly cooled samples. The derived conclusions considerably improve the knowledge about the behaviour against temperature of this type of granite, with the purpose of evaluating the integrity level of granite-built UNESCO cultural heritage of the north of Portugal.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Digital landform reconstruction using old and recent open access digital aerial photos

  • Riquelme, Adrián
  • Del Soldato, Matteo
  • Tomás, Roberto
  • Cano, Miguel
  • Jordá Bordehore, Luis
  • Moretti, Sandro
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Technological progress in remote sensing has enabled digital representation of terrain through new techniques (e.g. digital photogrammetry) and instruments (e.g. 3D laser scanners). However, the use of old aerial images remains important in geosciences to reconstruct past landforms and detect long-term topographic changes. Administrations have recently expressed growing interest in sharing photogrammetric datasets on public repositories, providing opportunities to exploit these resources and detect natural and anthropogenic topographic changes. The SfM-MVS photogrammetric technique was applied to scanned historical black and white aerial photos of the Serra de Fontcalent (Alicante, Spain), as well as to recent high-quality digital aerial photos. Ground control points (GCPs) extracted from a LiDAR-derived three-dimensional point cloud were used to georeference the results with non-linear deformations. Two point clouds obtained with SfM-MVS were compared with the LiDAR-derived reference point cloud. Based on the result, the quality of the models was analysed through the comparison of the stages on stable areas, i.e., lands where no variations were detected, and active areas, with quarries, new infrastructures, fillings, excavations or new buildings. This study also indicates that errors are higher for old aerial photos (up to 5 m on average) than recent digital photos (up to 0.5 m). The application of SfM-MVS to open access data generated 3D models that enhance the geomorphological analysis, compared to stereophotogrammetry, and effectively detected activities in quarries and building of landfills.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A New Polarimetric Persistent Scatterer Interferometry Method Using Temporal Coherence Optimization

  • Sadeghi, Zahra
  • Valadan Zoej, Mohammad Javad
  • Hooper, Andrew
  • Lopez-Sanchez, Juan M.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
While polarimetric persistent scatterer InSAR (PSI) is an effective technique for increasing the number and quality of selected PS pixels, existing methods are suboptimal; a polarimetric channel combination is selected for each pixel based either on amplitude, which works well only for high-amplitude scatterers such as man-made structures, or on the assumption that pixels in a surrounding window all have the same scattering mechanism. In this paper, we present a new polarimetric PSI method in which we use a phase-based criterion to select the optimal channel for each pixel, which can work well even in nonurban environments. This algorithm is based on polarimetric optimization of temporal coherence, as defined in the Stanford Method for PS (StaMPS), to identify the scatterers with stable phase characteristics. We form all possible copolar and cross-polar interferograms from the available polarimetric channels and find the optimum coefficients for each pixel using defined search spaces to optimize the temporal coherence. We apply our algorithm, PolStaMPS, to an area in the Tehran basin that is covered primarily by vegetation. Our results confirm that the algorithm substantially improves on StaMPS performance, increasing the number of PS pixels by 48%, 80%, and 82% with respect to HH+VV, VV, and HH channels, respectively, and increasing the signal-to-noise ratio of selected pixels.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A Modified General Polarimetric Model-Based Decomposition Method With the Simplified Neumann Volume Scattering Model

  • Xie, Qinghua
  • Zhu, Jianjun
  • Lopez-Sanchez, Juan M.
  • Wang, Changcheng
  • Fu, Haiqiang
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
This letter proposes a modified general polarimetric model-based decomposition method which includes a simplified Neumann volume scattering model (SNVSM). This is useful to avoid a known limitation in one of the state-of-the-art general model-based decomposition methods (i.e., Chen's method), which considers only four possible discrete volume scattering models. Two types of SNVSM, assuming horizontal or vertical dipoles, are derived from the Neumann volume scattering model. The resulting volume coherency matrix exhibits a continuous range of volume scattering models. In addition, this volume model covers both random and nonrandom volume cases, which are distinguished by a randomness parameter. Monte Carlo simulations are used to test this approach. The proposed method with SNVSM overall improves the final accuracy of estimated parameters in comparison with the original approach and shows consistency with another existing generalized volume scattering model (GVSM). In addition, results from two fully polarimetric C- and L-band AIRSAR images over San Francisco region show that the proposed method produces reasonably physical results and outperforms the traditional Y4R method. Finally, the differences obtained between SNVSM and GVSM in two building areas show the potential advantage of SNVSM in identifying more types of volume scenes than that of GVSM.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Assessment of landslide-induced damage to structures: the Agnone landslide case study (southern Italy)

  • Del Soldato, Matteo
  • Di Martire, Diego
  • Bianchini, Silvia
  • Tomás, Roberto
  • De Vita, Pantaleone
  • Ramondini, Massimo
  • Casagli, Nicola
  • Calcaterra, Domenico
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Landslides are among the most important and frequent natural calamities that cause severe socio-economic and human losses. After earthquakes, landslides are responsible for the greatest number of casualties and the largest amount of damage to man-made structures. On average, southern Italy is affected by a high spatial density of landslides due to its complex geological setting, which often predisposes it to slope instability phenomena under both natural and anthropogenic influences. Structurally complex formations are widespread in the southern Apennines and are characterized by high heterogeneity and very poor mechanical properties. Thus, these formations represent one of the main factors contributing to the predisposition of slopes to landsliding. In this paper, landslide-induced damage was investigated and analyzed in an area within the municipality of Agnone (Molise region), which is affected by a complex landslide that involves a structurally complex formation. The approaches used were based on six different methods that have previously been described in the literature, and a comparison of the results was made. Data regarding the damage, which consists largely of cracks observed in buildings and at the ground, were compiled through field surveys. The results were critically analyzed to note the advantages and constraints of each classification scheme. The aim of the work was to apply and compare different approaches in order to test the best and most accurate procedures for assessing damage due to landslides at the scale of individual buildings as well as to provide an objective assessment of the degree of landslide damage to structures and facilities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Three-dimensional and long-term landslide displacement estimation by fusing C- and L-band SAR observations: A case study in Gongjue County, Tibet, China

  • Liu, Xiaojie
  • Zhao, Chaoying
  • Zhang, Qin
  • Yin, Yueping
  • Lu, Zhong
  • Samsonov, Sergey
  • Yang, Chengsheng
  • Wang, Meng
  • Tomás, Roberto
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Recently, a large number of synthetic aperture radar (SAR) images has been introduced into landslide investigations with the growing launch of new SAR satellites, such as ALOS/PALSAR-2 and Sentinel-1. Therefore, it is appropriate to develop new approaches to retrieve three-dimensional (3D) displacements and long-term (> 10 years) displacement time series to investigate the spatio-temporal evolution and creep behavior of landslides. In this study, a new approach for the estimation of 3D and long-term displacement time series of landslides, based on the fusion of C- and L-band SAR observations, is presented. This method is applied to map 3D and long-term displacements (nearly 12 years) of the landslides in Gongjue County, Tibet in China; four sets of SAR images from different platforms (i.e., L-band ascending ALOS/PALSAR-1, C-band descending ENVISAT, and C-band ascending and descending Sentinel-1 SAR datasets) covering the period of January 2007 to November 2018 were collected and exploited. First, the assumption that the landslide moves parallel to its ground surface is used to produce 3D displacement rates and time series by fusing ascending and descending Sentinel-1 SAR images, from which the optimal sliding direction for each pixel of the slope is well estimated. Then, the long-term displacement time-series of the landslide between January 2007 and October 2018 in the estimated sliding direction is recovered by fusing L-band ALOS/PALSAR-1 and C-band Sentinel-1 SAR images. In order to fill the time gap of nearly four years between ALOS/PALSAR-1 and Sentinel-1 SAR images, the Tikhonov regularization (TR) method is developed to establish the observational equation. Moreover, to solve the problem arising from ALOS/PALSAR-1 and Sentinel-1 images with different wavelengths, incidence angles and flight directions, the measurements from ALOS/PALSAR-1 and Sentinel-1 images are both projected to the estimated optimal sliding direction to achieve a unified displacement datum. Our results from ascending and descending Sentinel-1 images suggest that the maximum displacement rates of the study area in the vertical and east-west directions from December 2016 to October 2018 were greater than 70 and 80 mm/year, respectively, and 2D displacement results reveal that the displacement patterns and movement characteristics of all the detected landslides are not identical in the study area. Specifically, the 3D displacement results successfully revealed the spatiotemporal displacement patterns and movement direction of each block of the Shadong landslide, and long-term displacement time series showed for the first time that the maximum cumulative displacement exceeds 1.3 m from January 2007 to October 2018. Moreover, the kinematic evolution and possible driving factors of landslides were investigated using 2D and 3D and long-term displacement results, coupled with hydrological factors and unidimensional constitutive models of the rocks.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A Review of Crop Height Retrieval Using InSAR Strategies: Techniques and Challenges

  • Romero-Puig, Noelia
  • Lopez-Sanchez, Juan M.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
This article compares the performance of four different interferometric synthetic aperture radar (SAR) techniques for the estimation of rice crop height by means of bistatic TanDEM-X data. Methods based on the interferometric phase alone, on the coherence amplitude alone, on the complex coherence value, and on polarimetric SAR interferometry (PolInSAR) are analyzed. Validation is conducted with reference data acquired over rice fields in Spain during the Science Phase of the TanDEM-X mission. Single- and dual-polarized data are exploited to also provide further insights into the polarization influence on these approaches. Vegetation height estimates from methodologies based on the interferometric phase show a general underestimation for the HH channel (with a bias that reaches around 25 cm in mid-July for some fields), whereas the VV channel is strongly influenced by noisy phases, especially at large incidences [root-mean-square error (RMSE) = 31 cm]. Results show that these approaches perform better at shallower incidences than the methodologies based on coherence amplitude and on PolInSAR, which obtain the most suitable results at steep incidences, with RMSE values of 17 and 23 cm. On the contrary, at shallower incidences, they are highly affected by very low input coherence levels. Hence, they tend to overestimate vegetation height.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Fusion of Multi-Temporal PAZ and Sentinel-1 Data for Crop Classification

  • Busquier, Mario
  • Valcarce-Diñeiro, Rubén
  • Lopez-Sanchez, Juan M.
  • Plaza, Javier
  • Sánchez, Nilda
  • Arias-Pérez, Benjamín
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
The accurate identification of crops is essential to help environmental sustainability and support agricultural policies. This study presents the use of a Spanish radar mission, PAZ, to classify agricultural areas with a very high spatial resolution. PAZ was recently launched, and it operates at X band, joining the synthetic aperture radar (SAR) constellation along with TerraSAR-X and TanDEM-X satellites. Owing to its novelty and its ability to classify crop areas (both taking individually its time series and blending with the Sentinel-1 series), it has been tested in an agricultural area of the central-western part of Spain during 2020. The random forest algorithm was selected to classify the time series under five alternatives of standalone/fused data. The map accuracy resulting from the PAZ series standalone was acceptable, but it highlighted the need for a denser time-series of data. The overall accuracy provided by eight PAZ images or by eight Sentinel-1 images was below 60%. The fusion of both sets of eight images improved the overall accuracy by more than 10%. In addition, the exploitation of the whole Sentinel-1 series, with many more observations (up to 40 in the same temporal window) improved the results, reaching an overall accuracy around 76%. This overall performance was similar to that obtained by the joint use of all the available images of the two frequency bands (C and X).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Novel clustering schemes for full and compact polarimetric SAR data: An application for rice phenology characterization

  • Dey, Subhadip
  • Bhattacharya, Avik
  • Ratha, Debanshu
  • Mandal, Dipankar
  • McNairn, Heather
  • Lopez-Sanchez, Juan M.
  • Rao, Yalamanchili S.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Information on rice phenological stages from Synthetic Aperture Radar (SAR) images is of prime interest for in-season monitoring. Often, prior in-situ measurements of phenology are not available. In such situations, unsupervised clustering of SAR images might help in discriminating phenological stages of a crop throughout its growing period. Among the existing unsupervised clustering techniques using full-polarimetric (FP) SAR images, the eigenvalue-eigenvector based roll-invariant scattering-type parameter, and the scattering entropy parameter are widely used in the literature. In this study, we utilize a unique target scattering-type parameter, which jointly uses the Barakat degree of polarization and the elements of the polarimetric coherency matrix. Likewise, we also utilize an equivalent parameter proposed for compact-polarimetric (CP) SAR data. These scattering-type parameters are analogous to the Cloude-Pottier’s parameter for FP SAR data and the ellipticity parameter for CP SAR data. Besides this, we also introduce new clustering schemes for both FP and CP SAR data for segmenting diverse scattering mechanisms across the phenological stages of rice. In this study, we use the RADARSAT-2 FP and simulated CP SAR data acquired over the Indian test site of Vijayawada under the Joint Experiment for Crop Assessment and Monitoring (JECAM) initiative. The temporal analysis of the scattering-type parameters and the new clustering schemes help us to investigate detailed scattering characteristics from rice across its phenological stages.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

On the Use of Neumann Decomposition for Crop Classification Using Multi-Temporal RADARSAT-2 Polarimetric SAR Data

  • Xie, Qinghua
  • Wang, Jinfei
  • Liao, Chunhua
  • Shang, Jiali
  • Lopez-Sanchez, Juan M.
  • Fu, Haiqiang
  • Liu, Xiuguo
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
In previous studies, parameters derived from polarimetric target decompositions have proven as very effective features for crop classification with single/multi-temporal polarimetric synthetic aperture radar (PolSAR) data. In particular, a classical eigenvalue-eigenvector-based decomposition approach named after Cloude–Pottier decomposition (or “H/A/α”) has been frequently used to construct classification approaches. A model-based decomposition approach proposed by Neumann some years ago provides two parameters with very similar physical meanings to polarimetric scattering entropy H and the alpha angle α in Cloude–Pottier decomposition. However, the main aim of the Neumann decomposition is to describe the morphological characteristics of vegetation. Therefore, it is worth investigating the performance of Neumann decomposition on crop classification, since vegetation is the principal type of targets in agricultural scenes. In this paper, a multi-temporal supervised classification method based on Neumann decomposition and Random Forest Classifier (named “ND-RF”) is proposed. The three parameters from Neumann decomposition, computed along the time series of data, are used as classification features. Finally, the Random Forest Classifier is applied for supervised classification. For comparison, an analogue classification scheme is constructed by replacing the Neumann decomposition with the Cloude–Pottier decomposition, hence named CP-RF. For validation, a time series of 11 polarimetric RADARSAT-2 SAR images acquired over an agricultural site in London, Ontario, Canada in 2015 is employed. Totally, 10 multi-temporal combinations of datasets were tested by adding images one by one sequentially along the SAR observation time. The results show that the ND-RF method generally produces better classification performance than the CP-RF method, with the largest improvement of over 12% in overall accuracy. Further tests show that the two parameters similar to entropy and alpha angle produce classification results close to those of CP-RF, whereas the third parameter in the Neumann decomposition is more effective in improving the classification accuracy with respect to the Cloude–Pottier decomposition.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Automatic Mapping of Discontinuity Persistence on Rock Masses Using 3D Point Clouds

  • Riquelme, Adrián
  • Tomás, Roberto
  • Cano, Miguel
  • Pastor Navarro, José Luis
  • Abellán Fernández, Antonio
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Finding new ways to quantify discontinuity persistence values in rock masses in an automatic or semi-automatic manner is a considerable challenge, as an alternative to the use of traditional methods based on measuring patches or traces with tapes. Remote sensing techniques potentially provide new ways of analysing visible data from the rock mass. This work presents a methodology for the automatic mapping of discontinuity persistence on rock masses, using 3D point clouds. The method proposed herein starts by clustering points that belong to patches of a given discontinuity. Coplanar clusters are then merged into a single group of points. Persistence is measured in the directions of the dip and strike for each coplanar set of points, resulting in the extraction of the length of the maximum chord and the area of the convex hull. The proposed approach is implemented in a graphic interface with open source software. Three case studies are utilized to illustrate the methodology: (1) small-scale laboratory setup consisting of a regular distribution of cubes with similar dimensions, (2) more complex geometry consisting of a real rock mass surface in an excavated cavern and (3) slope with persistent sub-vertical discontinuities. Results presented good agreement with field measurements, validating the methodology. Complexities and difficulties related to the method (e.g., natural discontinuity waviness) are reported and discussed. An assessment on the applicability of the method to the 3D point cloud is also presented. Utilization of remote sensing data for a more objective characterization of the persistence of planar discontinuities affecting rock masses is highlighted herein.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Rice phenology mapping using novel target characterization parameters from polarimetric SAR data

  • Dey, Subhadip
  • Bhogapurapu, Narayanarao
  • Bhattacharya, Avik
  • Mandal, Dipankar
  • Lopez-Sanchez, Juan M.
  • McNairn, Heather
  • Frery, Alejandro C.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
We require spatio-temporal information about rice for executing and planning diverse management practices. In this regard, data obtained from Synthetic Aperture Radar (SAR) sensors are well suited for tracking morphological developments of rice across its phenology stages. This study proposes different target characterization parameters from polarimetric SAR data for rice phenology mapping. Six C-band Radarsat-2 images acquired over Vijayawada, India, are used for complete analysis. It is known that polarimetric information provides excellent sensitivity for identifying crop phenology stages. Hence, in this study, we assessed phenology classification results using a scattering-type parameter and scattering powers for full-polarimetric (FP) and extracted dual-polarimetric (DP) SAR data. Here, we utilized the real 4×4 Kennaugh matrix elements to derive these parameters equivalently for the two polarimetric modes (i.e. FP and DP). We obtained better overall classification accuracy for each phenology stages using the proposed parameters than the existing ones from FP and DP SAR data. We noted that the overall classification accuracy using the DP SAR data was only marginally lower than the FP SAR data. This marginal difference in the accuracies could be due to the absence of the cross-polarized component in the DP SAR data. We also demonstrate the usefulness of the scattering powers from DP SAR data for rice phenology monitoring.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Use of artificial neural networks to predict 3-D elastic settlement of foundations on soils with inclined bedrock

  • Díaz Castañeda, Esteban
  • Brotons, Vicente
  • Tomás, Roberto
  • Díaz Castañeda, Esteban|||/items/74c6c9e7-e9d0-4fec-b740-4b57680cb6e0
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
The application of the theory of elasticity for the calculation of foundation settlements has yielded equations that are well-established and consolidated in geotechnical standards and/or that are recommended for use. These equations are corrected by an influence factor in order to increase their precision and to encompass the existing complex geotechnical casuistry. The study presented herein utilizes neural networks to improve the determination of the influence factor (Iα), which considers the effect of a finite elastic half-space limited by the inclined bedrock under a foundation. The results obtained through the utilization of artificial neural networks (ANNs) demonstrate a notable improvement in the predicted values for the influence factor in comparison with those of existing analytical equations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Contribution of New Types of Radar Data to Land Cover and Crop Classification in Remote Sensing

  • Busquier, Mario
For some time now, there has been a growing awareness in society about climate change, pollution, energy and the use of natural resources. This thinking has permeated society, mainly because the extreme natural phenomena that we are experiencing nowadays are no longer outliers in our time series of meteorological records. In this regard, it has been proven that the actual high temperatures are not only unparalleled, but also consistent around the globe which is something that had not happened until now (Neukom et al., 2019). The XX century was a turning point when it comes to the increase of the landuse for crops. In a context where the population doubled, the crop production for food from 1960 to 2010 tripled, helping to reduce the hungry population. When the world’s population is expected to continue to grow up to 9 billion people (Goodfray et al., 2010) by middle XXI century, it is essential to provide ourselves with the necessary tools to maximise crop production by taking advantage of all the resources available under a sustainable point of view. Under this context, all farmers in the European Union (EU) have the possibility to benefit from the Common Agricultural Policy (CAP), which came into force in 1960. The CAP is responsible for the financing of aid to farmers on a cross-compliance basis, based on the declaration of crop types. Traditionally, the authorities have checked the veracity of declarations in person through field inspections, which is clearly a highly inefficient, impractical and very expensive system. However, in 2018 the European Commission drafted an amendment to the CAP (European Commission, 2018), to be implemented in 2020, recommending the establishment of newprocedures for checking declarations, including the use of satellite data from the Copernicus programme or other new technologies. Among the various satellite technologies, Synthetic Aperture Radar (SAR) (Brown,1967; Curlander and McDonough, 1992) has proven the most reliable,as the images are acquired with a constant pass period and they are not subject to cloud problems (as is the case with sensors working in the optical domain) and information can be acquired both day and night. They are based in a SAR microwave sensor installed on a satellite platform with a forward trajectory which offers side-looking imaging geometries. Working in a range between 300 MHz and 30 GHz, the SAR sensor is in charge of emitting electromagnetic pulses and receiving the resulting echoes from the imaged target, which can help retrieve information about its dielectric properties, geometry, orientation, shape, and its behaviour along time. For a given target, the SAR backscattering response σ0 is function of many parameters (Lee and Pottier, 2017; Dobson et al., 1985): wave frequency, polarisation, imaging configuration, roughness, geometrical structure and dielectric properties. This makes the information extraction a major problem, as identical radar responses from two different targets may lead to the same result. To cope with this problem, the main techniques are based on extending the observation space by working with the full diversity of data. Thus, the main axes of SAR data are: • Time • Polarimetry • Interferometry • Frequency. Time series of radar data constitutes a major source of information for the classification of crops and land cover, since it makes it possible to distinguish between classes by their temporal behaviour: some land covers show a uniform response along time (e.g. urban areas), whereas there are others subject to seasonal changes (e.g. crops). It may happen that different crop species give the same radar response at a given time, however, when the time window becomes larger, and consecutive acquisitions are taken over a shorter time span, the more one can detect abrupt changes in the target over a longer time interval. Polarimetry is sensitive to the shape, orientation and the scattering mechanisms of the scatterers (Boerner et al.,1981; Zyl, Zebker, and Elachi, 1987). In that sense, when using different polarisations it is possible to discern better the true nature of the target, as some features may be visible in one polarisation but not in the others. Regarding multi-spectral data, it also constitutes a major source of information which can be exploited for classification purposes. Working with sensors operating at different frequencies, or wavelengths, provides diversity in the size of the elements of the scene to which the radar is sensitive as the radar backscattering will come from elements the size of the wavelength used it. For all of the above, multifrequency data provide complementary information, as each frequency operates and interacts with elements of the same wavelength or longer, and being transparent to all others. In addition, different bands are also associated with different spatial resolutions, so a high-frequency sensor can complement the classification performance of a low-frequency sensor when there are sufficiently small details in the scene that cannot be appreciated with the spatial resolution available at the lower frequency. From all the 4 axes exposed above, Interferometry (Graham, 1974) is without a doubt the least exploited for classification purposes. While polarimetry is sensitive to the scattering mechanisms of the scene by means of the polarisation information, interferometry adds the third dimension by being sensitive to the spatial distribution of the scatterers (Treuhaft et al., 1996). Coherence and phase difference computed between two complex-valued SAR images are the main descriptors of interferometry (Bamler and Hartl, 1998), and together, can be used to derive topographic information, vegetation structure, and deformation (volcanoes, landslides, etc.). For this reason, interferometry is especially suited for classification of covers in which there is vertical distribution of elements, e.g. urban areas and vegetation (forests and crops). Polarimetric interferometric SAR (PolInSAR) (Cloude and Papathanassiou, 1998; Treuhaft and Cloude, 1999), constitutes the next step forward, and is based on the application of interferometry to all polarisation channels. Polarimetry can identify the different scattering mechanisms in the scene by using the polarisation information, whilst interferometry is able to locate the effective scattering phase centres, which are mainly dependent on frequency, the polarisation employed, the physical, geometrical structure and orientation of the scatterer. By using the combination of both we can retrieve the vertical structure of the scene, which shows a great potential for classification purposes, since classes characterised by similar backscattering or polarimetric responses can be separated if their heights are different (e.g. types of buildings, forests, crops, etc.), whereas classes with similar heights, and hence similar interferometric coherence values (e.g. grass, crops, bare soil, etc.) can be resolved using their polarimetric response. In summary, PolInSAR-based classification is attractive since polarimetric ambiguities are resolved by interferometric information and vice-versa. The lack of exploitation of the 4 data axes in the literature, plus the arrival of a new generation of SAR sensors in the near future such as ROSE-L, BIOMASS and NISAR among others, offers a new range of possibilities in terms of new types of features for classification whose results and impact must be analysed. In this context, there are many types of SAR data (i.e. features) that have not been used yet, acquired from different sensors (Sentinel-1, PAZ, TanDEMX, TerraSAR-X and ALOS-2), and whose diversity axes, either used individually or jointly, have not yet been explored for classification applications. Therefore, the exploration of these new types of SAR data, whose contribution to classification is unknown regarding crop-type mapping, is the main objective of this doctoral thesis, and consequently also its main novelty. Based on the current state of the art of the research topic the main objective of this PhD thesis is to explore the added value of new SAR features, and their potential, alone or used together, for crop type and land cover classification. In the end, several experiments will be carried out, in different test sites, in which the proposed new features will be evaluated and compared with the traditional observables used so far, with the aim of evaluating their internal potential in classification applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Crop biophysical parameter retrieval from Sentinel-1 SAR data with a multi-target inversion of Water Cloud Model

  • Mandal, Dipankar
  • Kumar, Vineet
  • Lopez-Sanchez, Juan M.
  • Bhattacharya, Avik
  • McNairn, Heather
  • Rao, Yalamanchili S.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Estimation of bio-and geophysical parameters from Earth observation (EO) data is essential for developing applications on crop growth monitoring. High spatio-temporal resolution and wide spatial coverage provided by EO satellite data are key inputs for operational crop monitoring. In Synthetic Aperture Radar (SAR) applications, a semi-empirical model (viz., Water Cloud Model (WCM)) is often used to estimate vegetation descriptors individually. However, a simultaneous estimation of these vegetation descriptors would be logical given their inherent correlation, which is seldom preserved in the estimation of individual descriptors by separate inversion models. This functional relationship between biophysical parameters is essential for crop yield models, given that their variations often follow different distribution throughout crop development stages. However, estimating individual parameters with independent inversion models presume a simple relationship (potentially linear) between the biophysical parameters. Alternatively, a multi-target inversion approach would be more effective for this aspect of model inversion compared to an individual estimation approach. In the present research, the multi-output support vector regression (MSVR) technique is used for inversion of the WCM from C-band dual-pol Sentinel-1 SAR data. Plant Area Index (PAI, m2 m−2) and wet biomass (W, kg m−2) are used as the vegetation descriptors in the WCM. The performance of the inversion approach is evaluated with in-situ measurements collected over the test site in Manitoba (Canada), which is a super-site in the Joint Experiment for Crop Assessment and Monitoring (JECAM) SAR inter-comparison experiment network. The validation results indicate a good correlation with acceptable error estimates (normalized root mean square error–nRMSE and mean absolute error–MAE) for both PAI and wet biomass for the MSVR approach and a better estimation with MSVR than single-target models (support vector regression–SVR). Furthermore, the correlation between PAI and wet biomass is assessed using the MSVR and SVR model. Contrary to the single output SVR, the correlation between biophysical parameters is adequately taken into account in MSVR based simultaneous inversion technique. Finally, the spatio-temporal maps for PAI and W at different growth stages indicate their variability with crop development over the test site.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

3-D Morphological Change Analysis of a Beach with Seagrass Berm Using a Terrestrial Laser Scanner

  • Corbí, Hugo
  • Riquelme, Adrián
  • Megías, Clara
  • Abellán Fernández, Antonio
  • Corbí, Hugo|||/items/6b9064af-de45-4355-8ece-2ad15bdb692b
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
Along many Mediterranean coasts, the detached seagrass material of Posidonia oceanica creates seagrass berms that control the structure and morphodynamics of sandy beaches. Here, we show how Terrestrial Laser Scanner remote sensing data allows analyzing the 3-D morphologic change of beaches where this characteristic geomorphic structure is present. We propose a methodology for estimating accretion/erosion (almost −200 m3 in our study) by considering the sand dominated and seagrass berms as two independent elements. For this purpose, two different sampling dates (named scenarios A and B, before and after an erosive heavy storms period, respectively) recorded in a microtidal pocket-beach (300 m2) with these characteristic geomorphic structures have been modeled in 3-D. The present approach constitutes a cost-efficient, accurate, and quick tool to survey the sand volume in natural and artificial replenished beaches. The innovative approach, which can be considered as a conceptual and methodological starting point, can be useful to examine long-term and high-precision data sets in future studies of the morphodynamic evolution of these characteristic Mediterranean beaches.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Damage Caused by the Collapse of Gypsiferous Rock Masses. Callosa d’en Sarrià (SE Spain) Case Study, Daños derivados de colapsos en macizos rocosos yesíferos. Estudio de un caso en Callosa d’en Sarrià (SE España)

  • Cano, Miguel
  • Tomás, Roberto
  • Pastor Navarro, José Luis
  • Riquelme, Adrián
  • Rabat, Álvaro
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Cuando una edificación o una infraestructura civil se construye en una zona yesífera afectada por karstificación y se dan determinadas condiciones hidrogeológicas, el fenómeno de disolución puede seguir desarrollándose durante la vida útil de la construcción. Actualmente, el significado del término “karst” hace referencia a los procesos y fenómenos relacionados con la disolución de la roca por el agua en circulación. Como consecuencia del avance de la disolución interna de la roca se producen colapsos en los techos de las galerías generadas, que se traducen en hundimientos en superficie, los cuales afectan a las construcciones allí ubicadas. Los daños originados sobre las construcciones estarán condicionados por su calidad estructural, la magnitud del colapso y la interacción del sistema kárstico y las edificaciones. En este trabajo se muestran los resultados de un estudio sobre el origen de los daños en una vivienda aislada y un vial en la localidad de Callosa d’en Sarrià (España) ubicados sobre materiales yesíferos de facies Keuper. La solubilidad de la roca y las condiciones hidrogeológicas de la zona permiten concluir que, desde su construcción, hace más de 100 años, las cavidades preexistentes han podido agrandarse hasta un metro, considerando una tasa de disolución de 10 mm/año. Esta consideración, junto con la baja calidad geomecánica del macizo rocoso yesífero, implican un mal comportamiento del macizo cuando se forman cavernas o se amplían las preexistentes, dando lugar a colapsos que, por otra parte, son muy habituales en la zona.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Improving multi-technique monitoring using Sentinel-1 and Cosmo-SkyMed data and upgrading groundwater model capabilities

  • Ezquerro Martín, Pablo
  • Tomás, Roberto
  • Béjar Pizarro, Marta
  • Fernández-Merodo, José Antonio
  • Guardiola-Albert, Carolina
  • Staller, Alejandra
  • Sánchez-Sobrino, José Antonio
  • Herrera García, Gerardo
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Aquifer-systems have become a strategic source of fresh water in the present climatic conditions, especially under stress in arid regions like the Iberian Mediterranean Arc. Understanding the behavior of groundwater reservoirs is crucial to their well-management and mitigation of adverse consequences of overexploitation. In this work, we use space geodetic measurements from satellite interferometric synthetic aperture radar (InSAR) and Global Positioning System (GPS) data, covering the period 2011–2017, to predict and validate the ground surface displacement over the fastest subsiding basin due to groundwater withdrawal in Europe (>10 cm/year). The 2D decomposition of InSAR displacements from Cosmo-SkyMed and Sentinel-1 satellites allows us to detect horizontal deformation towards the basin center, with a maximum displacement of 1.5 cm/year. InSAR results were introduced in a newly developed methodology for aquifer system management to estimate unknown pumping rates for the 2012–2017 period. This study illustrates how the combination of InSAR data, groundwater flow and deformation models can be used to improve the aquifer-systems sustainable management.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Semi-Automatic Identification and Pre-Screening of Geological–Geotechnical Deformational Processes Using Persistent Scatterer Interferometry Datasets

  • Tomás, Roberto
  • Pagán, José Ignacio
  • Navarro, José A.
  • Cano, Miguel
  • Pastor Navarro, José Luis
  • Riquelme, Adrián
  • Cuevas-González, María
  • Crosetto, Michele
  • Barra, Anna
  • Monserrat, Oriol
  • Lopez-Sanchez, Juan M.
  • Ramón, Alfredo
  • Ivorra, Salvador
  • Del Soldato, Matteo
  • Solari, Lorenzo
  • Bianchini, Silvia
  • Raspini, Federico
  • Novali, Fabrizio
  • Ferretti, Alessandro
  • Costantini, Mario
  • Trillo, Francesco
  • Herrera García, Gerardo
  • Casagli, Nicola
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Pagán, José Ignacio|||/items/c33c5cf4-16b6-46cc-b0e4-d00477a8f6c2
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
This work describes a new procedure aimed to semi-automatically identify clusters of active persistent scatterers and preliminarily associate them with different potential types of deformational processes over wide areas. This procedure consists of three main modules: (i) ADAfinder, aimed at the detection of Active Deformation Areas (ADA) using Persistent Scatterer Interferometry (PSI) data; (ii) LOS2HV, focused on the decomposition of Line Of Sight (LOS) displacements from ascending and descending PSI datasets into vertical and east-west components; iii) ADAclassifier, that semi-automatically categorizes each ADA into potential deformational processes using the outputs derived from (i) and (ii), as well as ancillary external information. The proposed procedure enables infrastructures management authorities to identify, classify, monitor and categorize the most critical deformations measured by PSI techniques in order to provide the capacity for implementing prevention and mitigation actions over wide areas against geological threats. Zeri, Campiglia Marittima–Suvereto and Abbadia San Salvatore (Tuscany, central Italy) are used as case studies for illustrating the developed methodology. Three PSI datasets derived from the Sentinel-1 constellation have been used, jointly with the geological map of Italy (scale 1:50,000), the updated Italian landslide and land subsidence maps (scale 1:25,000), a 25 m grid Digital Elevation Model, and a cadastral vector map (scale 1:5000). The application to these cases of the proposed workflow demonstrates its capability to quickly process wide areas in very short times and a high compatibility with Geographical Information System (GIS) environments for data visualization and representation. The derived products are of key interest for infrastructures and land management as well as decision-making at a regional scale.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Influence of permeability on the stability of dual-structure landslide with different deposit-bedding interface morphology: The case of the three Gorges Reservoir area, China

  • Luo, Shi-lin
  • Huang, Da
  • Peng, Jian-bing
  • Tomás, Roberto
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
The construction of the Three Gorges Reservoir (TGR) has considerably increased landslide hazard due to the 30-m annual fluctuating reservoir water level. In this study, the influence of permeability on the stability of dual-structure landslide with different deposit-bedding interface (DBI) morphology were comprehensively investigated. A landslide database including 560 recorded dual-structure landslides was built for the statistical analysis. The DBI morphology, the slope structure and the permeability were classified and presented. The statistical analysis of the DBI morphological parameters indicates that the armchair type (AT) is the most popular in over-dip landslide, the curved type (CT) is very widespread in anaclinal landslide, the stepped type (ST) is the most common DBI morphology in over-dip landslide, and the linear type (LT) could be found widely at the under-dip landslide. Two conceptual models, downslide-locked model and locked model, were proposed according to the change rules of the dip angle of the DBI. The stability for these two conceptual models were analyzed and modeled as well as verified by specific case studies. The numerical results manifest that the permeability and the DBI morphology could pose significant impacts on the stability of the dual-structure landslide. Deepening our understanding of the effect of the fluctuating reservoir water level on the factor of safety (FOS) of the defined conceptual models, which are of paramount importance to improve the design of mitigation countermeasures and, consequently, to reduce fatalities and property losses in the TGR and many other analogous reservoir areas.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Considerations Relevant to the Stability of Granite Boulders

  • Alejano, Leandro R.
  • Pérez-Rey, Ignacio
  • Múñiz-Menéndez, Mauro
  • Riquelme, Adrián
  • Walton, Gabriel
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
Granite boulders are characteristic geomorphological structures formed in granitic terrains. Due to their formation process associated with typical spheroidal weathering phenomena, they tend to show more or less ellipsoidal shapes prone to instability, and they often lie on small contact surfaces. Analyzing the stability of these boulders is not a straightforward task. First, these boulders may topple or slide. Additionally, their typically irregular geometry and uneven contact with the surface where they lie makes the analysis more complex. The authors have identified some critical issues that are relevant to characterize these boulders from a rock mechanics point of view, with the aim of estimating the stability of boulders. In particular, an accurate description of the geometry of the boulder is necessary to perform accurate toppling calculations. Additionally, the contact area and the features of the contact plane need to be known in detail. The study is intended to serve as a guideline to address the stability of these granite boulders in a rigorous way, since standard rock mechanics approaches (planar failure, toppling stability, standard rock joint strength criteria, etc.) may not be directly applicable to these particular cases.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Evaluation of the Multilook Size in Polarimetric Optimization of Differential SAR Interferograms

  • Mestre-Quereda, Alejandro
  • Lopez-Sanchez, Juan M.
  • Ballester-Berman, J. David
  • González, Pablo J.
  • Hooper, Andrew
  • Wright, Timothy J.
  • Ballester-Berman, J. David|||/items/a6960cca-2ad9-4d2b-ab77-465bf799fba8
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Mestre-Quereda, Alejandro|||/items/2c94ed0b-7761-4a20-9cb1-8a8abedcb7c6
The interferometric coherence is a measure of the correlation between two SAR images and constitutes a commonly used estimator of the phase quality. Its estimation requires a spatial average within a 2-D window, usually named as multilook. The multilook processing allows reducing noise at the expenses of a resolution loss. In this letter, we analyze the influence of the multilook size while applying a polarimetric optimization of the coherence. The same optimization algorithm has been carried out with different multilook sizes and also with the nonlocal SAR filter filter, which has the advantage of preserving the original resolution of the interferogram. Our experiments have been carried out with a single pair of quad-polarimetric RADARSAT-2 images mapping the Mount Etna's volcanic eruption of May 2008. Results obtained with this particular data set show that the coherence is increased notably with respect to conventional channels when small multilook sizes are employed, especially over low-vegetated areas. Conversely, very decorrelated areas benefit from larger multilook sizes but do not exhibit an additional improvement with the polarimetric optimization.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

An Improved Phase Filter for Differential SAR Interferometry Based on an Iterative Method

  • Mestre-Quereda, Alejandro
  • Lopez-Sanchez, Juan M.
  • Selva, Jesus
  • González, Pablo J.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Mestre-Quereda, Alejandro|||/items/2c94ed0b-7761-4a20-9cb1-8a8abedcb7c6
  • Selva, Jesus|||/items/331697ab-a206-432e-be53-f373712b34be
Phase quality is a key element in the analysis of the deformation of the Earth's surface carried out with differential synthetic aperture radar interferometry. Various decorrelation sources may degrade the surface deformation estimates, and thus, phase filters are needed for this kind of application. The well-known Goldstein filter is the most widely used due to its simple implementation and computational efficiency. In the past years, improved filters have been proposed, which are based on this filter but introduce variations in the data processing. The effectiveness of these filters mostly depends on the size of the filtering window, the weight of the smoothed spectrum, and the kernel used to filter the spectrum. In this paper, we evaluate the performance of four of these filters and present a new method that outperforms all of them. The proposed filter is based on an iterative method in which the original phase is denoised progressively with adaptive filtering windows of different sizes. The effectiveness of the filter is controlled by the interferometric coherence, a direct indicator of the phase quality. Moreover, we introduce some modifications regarding the processing of the power spectrum. Specifically, we propose to smooth the original phase using a new filter which is based on a Chebyshev interpolation scheme. The performance of the new filter has been tested on both simulated and real interferograms, acquired by RADARSAT-2 and the Uninhabited Aerial Vehicle Synthetic Aperture Radar, which mapped two different geological events that caused surface deformation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Monitoring Agricultural Fields Using an Optimisation of the Difference of Covariance Matrices for Polsar

  • Silva, Cristian
  • Marino, Armando
  • Lopez-Sanchez, Juan M.
  • Cameron, Iain
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
SAR polarimetry (PolSAR) can play an important role in monitoring agricultural fields both in terms of improving detection of specific plants conditions and providing physical information regarding the change. Such information can be used to help retrieving the phenological stage and eventually identifying stress conditions. In this work, a new change detection based on PolSAR data is first tested over time series of images acquired over agricultural fields. The methodology is based on the use of the normalised difference between covariance matrices acquired at two different instants. A diagonalisation of such matrix allows identifying the scattering mechanisms that suffer the largest change. The methodology is tested exploiting C-band quad-polarimetric RADARSAT-2 data over rice fields in Sevilla, South-West of Spain.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Spatial Analysis of Land Subsidence in the San Luis Potosi Valley Induced by Aquifer Overexploitation Using the Coherent Pixels Technique (CPT) and Sentinel-1 InSAR Observation

  • Navarro-Hernández, María I.
  • Tomás, Roberto
  • Lopez-Sanchez, Juan M.
  • Cárdenas-Tristán, Abraham
  • Mallorquí Franquet, Jordi J.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Navarro-Hernández, María I.|||/items/5f436097-bc19-404c-be1d-b217b1ee54de
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
The San Luis Potosi metropolitan area has suffered considerable damage from land subsidence over the past decades, which has become visible since 1990. This paper seeks to evaluate the effects of groundwater withdrawal on land subsidence in the San Luis Potosi Valley and the development of surface faults due to the differential compaction of sediments. For this purpose, we applied the Coherent Pixels Technique (CPT), a Persistent Scatterer Interferometry (PSI) technique, using 112 Sentinel-1 acquisitions from October 2014 to November 2019 to estimate the deformation rate. The results revealed that the deformation areas in the municipality of Soledad de Graciano Sánchez mostly exhibit subsidence values between −1.5 and −3.5 cm/year; whereas in San Luis Potosi these values are between −1.8 and −4.2 cm/year. The PSI results were validated by five Global Navigation Satellite System (GNSS) benchmarks available, providing a data correlation between the results obtained with both techniques of 0.986. This validation suggests that interferometric derived deformations agree well with results obtained from GNSS data. The strong relationship between trace fault, land subsidence,e and groundwater extraction suggests that groundwater withdrawal is resulting in subsidence induced faulting, which follows the pattern of structural faults buried by sediments.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Double-Bounce Contribution Effect in the Estimation of Biophysical Parameters of Vegetation Based on PolInSAR TanDEM-X Bistatic Data

  • Romero-Puig, Noelia
  • Lopez-Sanchez, Juan M.
  • Ballester-Berman, J. David
  • Ballester-Berman, J. David|||/items/a6960cca-2ad9-4d2b-ab77-465bf799fba8
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
In this work we provide a detailed analysis of the effect of the double-bounce decorrelation factor on the inversion of scene parameters, with particular focus on the vegetation height. The study employs both simulated data as well as real data acquired over rice fields during the science phase of the TanDEM-X mission. The potential limitations of current inversion approaches are assessed, and the influence of both system parameters (i.e. incidence angle) and scene parameters (i.e. extinction coefficient and ground-to-volume ratios) is evaluated. Results show that the bias in the estimation of scene parameters is higher when the incidence angle is above 30 degrees, i.e for shallow incidences. The normalised vegetation height, i.e. expressed as kv , is used in order to extrapolate the results to other scenarios, e.g. forests.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A Novel Phenology Based Feature Subset Selection Technique Using Random Forest for Multitemporal PolSAR Crop Classification

  • Hariharan, Siddharth
  • Mandal, Dipankar
  • Tirodkar, Siddhesh
  • Kumar, Vineet
  • Bhattacharya, Avik
  • Lopez-Sanchez, Juan M.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Feature selection techniques intent to select a subset of features that minimizes redundancy and maximizes relevancy for classification problems in machine learning. Standard methods for feature selection in machine learning seldom take into account the domain knowledge associated with the data. Multitemporal crop classification studies with full-polarimetric synthetic aperture radar (PolSAR) data ought to consider the changes in the scattering mechanisms with their phenological growth stages. Hence, it is desirable to incorporate these changes while determining a feature subset for classification. In this study, a random forest (RF) based feature selection technique is proposed that takes into account the changes in the physical scattering mechanism with crop phenological stages for multitemporal PolSAR classification. The partial probability plot, which is an attribute of RF, provides information about the marginal effect of a polarimetric parameter on the desired crop class. Moreover, it is used to identify the specific range of a parameter where the probability of the presence of a particular crop class is high. The proposed technique identifies features that change significantly with crop phenology. The selected features are the ones whose ranges show maximum separation amongst crop classes. Additionally, the feature subset is refined by eliminating correlated features. The E-SAR L-band dataset of the AgriSAR-2006 campaign over the Demmin test site in Germany is used in this study. The classification accuracy using the novel feature selection technique is 99.12%. This is nominally better than using the features obtained from a standard feature selection method used in RF, such as mean decrease Gini (98.73%) and mean decrease accuracy (98.68%) that do not take into account the information based on crop phenology.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Combining SfM Photogrammetry and Terrestrial Laser Scanning to Assess Event-Scale Sediment Budgets Along a Gravel-Bed Ephemeral Stream

  • Conesa García, Carmelo
  • Puig-Mengual, Carlos
  • Riquelme, Adrián
  • Tomás, Roberto
  • Martínez Capel, Francisco
  • García-Lorenzo, Rafael
  • Pastor Navarro, José Luis
  • Pérez-Cutillas, Pedro
  • Cano, Miguel
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Stream power represents the rate of energy expenditure along a stream reach and can be calculated using topographic data acquired via structure-from-motion (SfM) photogrammetry and terrestrial laser scanning (TLS). This study sought to quantitatively relate morphological adjustments in the Azohía Rambla, a gravel-bed ephemeral stream in southeastern Spain, to stream power (ω), critical power (ωc), and energy gradients (∂ω/∂s), along different reference channel reaches of 200 to 300 m in length. High-resolution digital terrain models (HRDTMs), combined with ortophotographs and point clouds from 2018, 2019, and 2020, and ground-based surveys, were used to estimate the spatial variability of morphological sediment budgets and to assess channel bed mobility during the study period at different spatial scales: reference channel reaches (RCRs), pilot bed survey areas (PBSAs), and representative geomorphic units (RGUs). The optimized complementary role of the SfM technique and terrestrial laser scanning allowed the generation of accurate and reliable HRDTMs, upon which a 1-D hydrodynamic model was calibrated and sediment budgets calculated. The resulting high-resolution maps allowed a spatially explicit analysis of stream power and transport efficiency in relation to volumes of erosion and deposition in the RCR and PBSA. In addition, net incision or downcutting and vertical sedimentary accretion were monitored for each flood event in relation to bedforms and hydraulic variables. Sediment sources and sinks and bed armoring processes showed different trends according to the critical energy and stream power gradient, which were verified from field observations. During flows exceeding bankfull discharges (between 18 and 24 m3s−1 according to channel reach), significant variations in ∂ω/∂s values and ω/ωc ratios (e.g., −15< ∂ω/∂s <15 Wm−3; ω/ωc >2 for a peak discharge of 31 m3s−1) were associated with a large amount of bedload mobilized upstream and vertical accretion along the middle reach (average rise height of 0.20 to 0.35 m for the same event). By contrast, more moderate peak flows (≤10 m3s−1) only produced minor changes resulting in surface washing, selective transport, and local bed scouring.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Geometrical and geotechnical characterization of the earth fissures appeared in the Guadalentín Valley (southeastern Spain) after the September 2012 flooding

  • Pastor Navarro, José Luis
  • Mulas de la Peña, Joaquín
  • Tomás, Roberto
  • Herrera García, Gerardo
  • Fernández-Merodo, José Antonio
  • Béjar Pizarro, Marta
  • Jordá Bordehore, Luis
  • García López-Davalillos, Juan Carlos
  • Aragón, Ramón
  • Mateos, Rosa María
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Two earth fissures appeared in Murcia province (southeastern Spain) after the flood occurred because of a heavy downpour on 28 September 2012. In this area, located within the Guadalentín Valley, up to 212 L m−2 was reported that day. More than 200 agricultural exploitations were destroyed by the flooding, with a devastating effect on many infrastructures, such as a main A-7 highway bridge that collapsed in this event. The earth fissures appeared after this flooding in the towns of Puerto Lumbreras and Totana. The first fissure showed a straight-line direction approximately parallel to the main geological structures of the Guadalentín Valley. The total length of the fissure was 400 m and was 2 to 3 m in depth. The soil in the fissure is classified as a low-plasticity silt with some sand and clay, ML, according to the Unified Soil Classification System. From the sieve and hydrometer tests, the percentage of silt in these samples was between 48 % and 68 %, the clay content between 12 % and 30 % and the sand content between 2 % and 40 %. The plasticity index was smaller than 9.2 for all the samples. To evaluate the piping and internal erosion susceptibility of the soil, pinhole, crumb and geochemical tests were done on the collected samples. A result of non-dispersive soil was obtained from crumb and pinhole tests. Nevertheless, the pH, sodium adsorption ratio and exchangeable sodium percentage tests showed that some samples could be affected by the dispersion of the soil. Also, the collapsible potential of the soil was studied, showing negative results for all the samples except for that collected at the southern end of the fissure, which showed a medium to high potential. Concerning the Totana fissure, it appeared with different branches and holes instead of as a rectilinear pattern. The total length of the fissure was 190 m, with the soil characterized as a silty soil. Lastly, INSAR data, GPS, GPR and land subsidence maps were used to study the possible origin of these fissures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Land subsidence in Beijing and its relationship with geological faults revealed by Sentinel-1 InSAR observations

  • Hu, Leyin
  • Dai, Keren
  • Xing, Chengqi
  • Li, Zhenhong
  • Tomás, Roberto
  • Clark, Beth
  • Shi, Xianlin
  • Chen, Mi
  • Zhang, Rui
  • Qiu, Qiang
  • Lu, Yajun
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Beijing, the capital city of China, has been affected by land subsidence due to intensive groundwater extraction since 1935. Recent studies reported that the maximum subsidence occurred in the east of Beijing, reaching more than 11 cm/year till 2017. To investigate the subsidence (2015˜2017) in Beijing, in this paper, time series interferometric synthetic aperture radar (TS-InSAR) analysis was performed with 22 Sentinel-1 Terrain Observation by Progressive Scans (TOPS) mode SAR data. Results show that wide areas in the east of Beijing are subsiding with a maximum rate of 14 cm/year, which is consistent with GPS data. Detailed analysis of the obtained subsidence map reveals the existence of several characteristic near-linear boundaries within the subsiding areas. As a result of our previous three-year project, we generated the exact location, direction, and late Quaternary activity of the main potential active faults in the Beijing area. The relationship between the trace of these existing geological faults and the mentioned subsidence boundaries was investigated in detail. It is suggested that land subsidence in Beijing was mainly caused by the over-extraction of groundwater, with its spatial pattern being controlled by geological faults.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

3D groundwater flow and deformation modelling of Madrid aquifer

  • Bonì, Roberta
  • Meisina, Claudia
  • Teatini, Pietro
  • Zucca, Francesco
  • Zoccarato, Claudia
  • Franceschini, Andrea
  • Ezquerro Martín, Pablo
  • Béjar Pizarro, Marta
  • Fernández-Merodo, José Antonio
  • Guardiola-Albert, Carolina
  • Pastor Navarro, José Luis
  • Tomás, Roberto
  • Herrera García, Gerardo
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
A novel methodological approach to calibrate and validate three-dimensional (3D) finite element (FE) groundwater flow and geomechanical models has been implemented using Advanced Differential Interferometric SAR (A-DInSAR) data. In particular, we show how A-DInSAR data can be effectively used to (1) constrain the model set-up in evaluating the areal influence of the wellfield and (2) characterise the aquifer system, specifically the storage coefficient values, which represents a fundamental step in managing groundwater resources. The procedure has been tested to reconstruct the surface vertical and horizontal movements caused by the Manzanares-Jarama wellfield located northwest of Madrid (Spain). The wellfield was used to supply freshwater during major droughts over the period between 1994 and 2010. Previous A-DInSAR outcomes obtained by ERS-1/2 and ENVISAT acquisitions clearly revealed the seasonality of the land displacements associated to the withdrawal and recovery cycles that characterized the wellfield development. A time-lag of about one month, which is in the order of the time span between two SAR acquisitions, between the hydraulic head changes and the displacements has been detected in this site by a wavelet analysis of A-DInSAR and piezometer time series. The negligible delay between the forcing factor and the system response and the complete subsidence recovery when piezometric head recovers supported the understanding of a minor role played by the pore pressure propagation within clay layers and the almost perfectly elastic behavior of the system (viscosity is negligible), respectively. The developed geomechanical model satisfactorily reproduces the pumping-induced deformations with a Root Mean Square Error (RMSE) between observed and simulated land displacements in the order of 0.1-0.3 mm. The results give insights about the approach benefits in deeply understanding the spatio-temporal aquifer-system response to the management of this strategic water resource for Madrid.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A software for considering leakage in water pressurized networks

  • Pardo Picazo, Miguel Ángel
  • Riquelme, Adrián
  • Pardo Picazo, Miguel Ángel|||/items/4e2a67ff-4eec-4e38-a836-45bb184b5ef6
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
A matlab‐based educational software (UAleaks) has been developed to consider the effect of water losses when solving the hydraulic problem in water pressurized networks. The results obtained are the new leaky network model and the water and energy audits calculation. This software can be used by students and practitioners.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Model-Based Decomposition of Dual-Pol SAR Data: Application to Sentinel-1

  • Mascolo, Lucio
  • Cloude, Shane R.
  • Lopez-Sanchez, Juan M.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
In this study, we advance a new family of model-based decompositions adapted for dual-pol synthetic aperture radar data. These are formulated using the Stokes vector formalism, coupled to mappings from full quad-pol decomposition theory. A generalized model-based decomposition is developed, which allows separation of an arbitrary Stokes vector into partially polarized and polarized wave components. We employ the widely used random dipole cloud as a volume model but, in general, non-dipole options can be used. The cross-polarized phase δ, and the α angle, which is a function of the ratio between wave components, measure the transformation of polarization state on reflection. We apply the decomposition to dual-pol data provided by Sentinel-1 covering different scenarios, such as agricultural, forest, urban and glacial land-ice. We show that the polarized term of received polarization state is not usually the same as the transmitted one, and can therefore be used for key applications, e.g., classification and geo-physical parameter estimation. We show that, for vegetated terrain, depolarization is not the only influencing factor to Sentinel-1 backscattered intensities and, in the case of vertical crops (e.g., rice), this allows the crop orientation effects to be decoupled from volume scattering in the canopy. We demonstrate that coherent dual-pol systems show strong phase signatures over glaciers, where the polarized contribution significantly affects the backscattered state, resulting in elliptical polarization on receive. This is a key result for Sentinel-1, for which dual-pol phase analysis coupled to dense time series offer great opportunities for land-ice monitoring.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Dual-polarimetric descriptors from Sentinel-1 GRD SAR data for crop growth assessment

  • Bhogapurapu, Narayanarao
  • Dey, Subhadip
  • Bhattacharya, Avik
  • Mandal, Dipankar
  • Lopez-Sanchez, Juan M.
  • McNairn, Heather
  • Lopez-Martinez, Carlos
  • Rao, Yalamanchili S.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Accurate and high-resolution spatio-temporal information about crop phenology obtained from Synthetic Aperture Radar (SAR) data is an essential component for crop management and yield estimation at a local scale. Crop growth monitoring studies seldom exploit complete polarimetric information contained in dual-pol GRD SAR data. In this study, we propose three polarimetric descriptors: the pseudo scattering-type parameter (θc), the pseudo scattering entropy parameter (Hc), and the co-pol purity parameter (mc) from dual-pol S1 GRD SAR data. We also introduce a novel unsupervised clustering framework using Hc and θc with six clustering zones to represent various scattering mechanisms. We implemented the proposed algorithm on the cloud-based Google Earth Engine (GEE) platform for Sentinel-1 SAR data. We have shown the sensitivity of these descriptors over a time series of data for wheat and canola crops at a test site in Canada. From the leaf development stage to the flowering stage for both crops, the pseudo scattering-type parameter θc changes by approximately 17◦. Moreover, within the entire phenology window, both mc and Hc varies by about 0.6. The effectiveness of θc and Hc to cluster the phenological stages for the two crops is also evident from the clustering plot. During the leaf development stage, about 90% of the sampling points were clustered into the low to medium entropy scattering zone for both the crops. Throughout the flowering stage, the entire cluster shifted into the high entropy vegetation scattering zone. Finally, during the ripening stage, the clusters of sample points were split between the high entropy vegetation scattering zone and the high entropy distributed scattering zone, with > 55% of the sampling points in the high entropy distributed scattering zone. This innovative clustering framework will facilitate the operational use of S1 GRD SAR data for agricultural applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Evaluación de la estabilidad de taludes rocosos a partir de nubes de puntos 3D obtenidas con un vehículo aéreo no tripulado, Evaluation of the stability of rocky slopes using 3D point clouds obtained from an unmanned aerial vehicle

  • Tomás, Roberto
  • Riquelme, Adrián
  • Cano, Miguel
  • Pastor Navarro, José Luis
  • Pagán, José Ignacio
  • Asensio, José Luis
  • Ruffo, Max
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pagán, José Ignacio|||/items/c33c5cf4-16b6-46cc-b0e4-d00477a8f6c2
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
En este trabajo se describe una metodología propuesta para la identificación semiautomática de discontinuidades y el posterior análisis cinemático y de estabilidad a través de su aplicación a una trinchera excavada en roca de una línea de ferrocarril. La adquisición de imágenes se ha llevado a cabo mediante un vehículo aéreo no tripulado de seis rotores para su posterior restitución fotogramétrica a través de la técnica digital Structure from Motion (SfM) mediante el programa Agisoft Metashape que proporciona una nube de puntos 3D. A partir de esta nube de puntos, se han identificado cuatro familias de discontinuidades (J1, J2, J3 y J4) que afectan al talud haciendo uso del programa de código abierto Discontinuity Set Extractor (DSE). Finalmente, se han llevado a cabo análisis cinemáticos y de estabilidad de las posibles roturas de bloques a favor de las discontinuidades identificadas en el talud. Los resultados muestran tres potenciales roturas por cuña y una plana que han sido validadas cualitativamente mediante el análisis de la geometría de las nubes de puntos.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Suitability Assessment of X-Band Satellite SAR Data for Geotechnical Monitoring of Site Scale Slow Moving Landslides

  • Bru, Guadalupe
  • Escayo, Joaquin
  • Fernández Torres, José
  • Mallorquí Franquet, Jordi Joan
  • Iglesias, Rubén
  • Sansosti, Eugenio
  • Abajo, Tamara
  • Morales, Antonio
This work addresses the suitability of using X-band Synthetic Aperture Radar (SAR) data for operational geotechnical monitoring of site scale slow moving landslides, affecting urban areas and infrastructures. The scale of these studies requires high resolution data. We propose a procedure for the practical use of SAR data in geotechnical landslides campaigns, that includes an appropriate dataset selection taking into account the scenario characteristics, a visibility analysis, and considerations when comparing advanced differential SAR interferometry (A-DInSAR) results with other monitoring techniques. We have determined that Sentinel-2 satellite optical images are suited for performing high resolution land cover classifications, which results in the achievement of qualitative visibility maps. We also concluded that A-DInSAR is a very powerful and versatile tool for detailed scale landslide monitoring, although in combination with other instrumentation techniques., This work was financially supported by the Spanish Ministerio de Economía y Competitividad (MINECO) research projects IPT-2011-1234-310000, ESP2013-47780-C2-1-R, and RTC-2014-1922-5. Research by RI and JJM has been also supported by the Big Risk project (contract number BIA2008-06614) and by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO), the State Research Agency (AEI) and the European Funds for Regional Development (EFRD) under project TEC2017-85244-C2-1-P. CommSensLab is Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the Agencia Estatal de Investigación, Spain, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring TanDEM-X Interferometric Products for Crop-Type Mapping

  • Busquier, Mario
  • López-Sánchez, Juan M.
  • Mestre-Quereda, Alejandro
  • Navarro, Elena
  • González-Dugo, María P.
  • Mateos, Luciano
This article belongs to the Special Issue Feature-Based Methods for Remote Sensing Image Classification., The application of satellite single-pass interferometric data to crop-type mapping is demonstrated for the first time in this work. A set of nine TanDEM-X dual-pol pairs of images acquired during its science phase, from June to August 2015, is exploited for this purpose. An agricultural site located in Sevilla (Spain), composed of fields of 13 different crop species, is employed for validation. Sets of input features formed by polarimetric and interferometric observables are tested for crop classification, including single-pass coherence and repeat-pass coherence formed by consecutive images. The backscattering coefficient at HH and VV channels and the correlation between channels form the set of polarimetric features employed as a reference set upon which the added value of interferometric coherence is evaluated. The inclusion of single-pass coherence as feature improves by 2% the overall accuracy (OA) with respect to the reference case, reaching 92%. More importantly, in single-pol configurations OA increases by 10% for the HH channel and by 8% for the VV channel, reaching 87% and 88%, respectively. Repeat-pass coherence also improves the classification performance, but with final scores slightly worse than with single-pass coherence. However, it improves the individual performance of the backscattering coefficient by 6–7%. Furthermore, in products evaluated at field level the dual-pol repeat-pass coherence features provide the same score as single-pass coherence features (overall accuracy above 94%). Consequently, the contribution of interferometry, both single-pass and repeat-pass, to crop-type mapping is proved., This work was funded by the Spanish Ministry of Science and Innovation, the State Agency of Research (AEI) and the European Funds for Regional Development (EFRD) under Project TEC2017-85244-C2-1-P, and by the European Commission, H2020 Programme, under Project MOSES (Managing crOp water Saving with Enterprise Services).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Canopy Height Estimation in Mediterranean Forests of Spain with TanDEM-X Data

  • Gómez, Cristina
  • López-Sánchez, Juan M.
  • Romero-Puig, Noelia
  • Zhu, Jianjun
  • Fu, Haiqiang
  • Ze, Wenjie
  • Xie, Yanzhou
  • Xie, Qinghua
Centro de Investigación Forestal (CIFOR), Canopy height is an essential feature in forest inventory, and for the assessment of biomass and carbon budgets. Spatially explicit maps of forest height over large areas can be derived from satellite synthetic aperture radar data. We aimed to evaluate the capacity of TanDEM-X (TDX) data to assess canopy height in Mediterranean forests of Spain, which are of relatively short height (typically < 20 m), diverse in species and structure, and adapted to summer drought. Interferogram coherence was retrieved from single-pol image pairs. Forest height estimation was carried out by previously fitting a sinc-type function, with two empirical parameters, to the data measured. Six types of forest were defined to assess the convenience of stratification for model implementation. The influence of terrain slope, forest type, and interferometric baseline on model performance was evaluated, and a strategy for large area mapping was proposed and tested. TDX-derived heights were compared to a contemporaneous LiDAR-derived canopy height model for assessment of quality. Results limited to slopes below 10° provided the best results, reaching R2 = 0.91 and root-mean-square error = 1.24 m in one of the study sites. However, in some areas the results were much worse, especially in regions characterized by rugged terrain with broadleaved species. This work demonstrates the feasibility of deriving a forest height map over the entire area of Spain from TDX data. Stratification per slope interval and selection of long interferometric baselines are recommended., This work was supported in part by the Spanish Ministry of Science, Innovation, and University and EU EFDR funds under Project TEC2017-85244-C2-1-P, and in part by the National Natural Science Foundation of China under Grant 41820104005, Grant 41804004, and Grant 41904004. The work of Cristina Gómez was supported under Project FORESTCHANGE (AGL2016-76769-C2-1-R) German Aerospace Center (DLR) provided all the TanDEM-X data under Project OTHER7349, Peer reviewed, 10 Pág
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Initial Tests for the Generation of a Spanish National Map of Forest Height from Tandem-X Data

  • Gómez, Cristina
  • Romero-Puig, Noelia
  • López-Sánchez, Juan M.
  • Mestre-Quereda, Alejandro
  • Zhu, Jianjun
  • Fu, Haiqiang
  • He, Wenjie
  • Xie, Qinghua
The first results of a project aimed at estimating forest height over the entire Spain by means of TanDEM-X data are shown and discussed in this work. Four test sites representative of the Spanish forests are introduced, as well as the data used for validation of results. Results obtained over one of the test sites (in Teruel province) are presented here. Among the challenges found in the project, the influence of slope in mountain areas and the relatively short height of the forest canopy make this work distinctive to previous projects employing TanDEM-X data for estimation of heights in tropical, boreal and temperate regions., This work was supported by the Spanish Ministry of Science, Innovation and Universities, the State Agency of Research (AEI) and the European Funds for Regional Development (EFRD) under Project TEC2017-85244-C2-1-P, and by the Natural National Science Foundation of China under Grant nr. 41820104005. Noelia Romero-Puig received a grant from the Gen-eralitat Valenciana and the European Social Fund (ESF) [ACIF/2018/204]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mapping the global threat of land subsidence

  • Herrera García, Gerardo
  • Ezquerro Martín, Pablo
  • Tomás, Roberto
  • Béjar Pizarro, Marta
  • López-Vinielles, Juan
  • Rossi, Mauro
  • Mateos Ruiz, Rosa María
  • Carreón Freyre, Dora
  • Lambert, John
  • Teatini, Pietro
  • Cabral Cano, E.
  • Erkens, Gilles
  • Galloway, Devin
  • Hung, Wei-Chia
  • Kakar, Najeebullah
  • Sneed, Michelle
  • Tosi, Luigi
  • Wang, Hanmei
  • Ye, Shujun
Funding for this study was provided partly by the Spanish Research Agency (AQUARISK, PRX19/00065, TEC2017-85244-C2-1-P projects) and PRIMA RESERVOIR project, and by all the institutions represented in the Land Subsidence International Initiative from UNESCO., Peer reviewed