Skip to main content

SERVICIOS OPERACIONALES DE OBSERVACION DE LA TIERRA BASADOS EN UN ENFOQUE DINAMICO PARA DATOS RADAR MULTIDIMENSIONALES

TIN2014-55413-C2-2-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 40
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Proposal of a New Parameter for the Weathering Characterization of Carbonate Flysch-Like Rock Masses: The Potential Degradation Index (PDI)

  • Cano, Miguel
  • Tomás, Roberto
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
The susceptibility of clay bearing rocks to weathering (erosion and/or differential degradation) is known to influence the stability of heterogeneous slopes. However, not all of these rocks show the same behaviour, as there are considerable differences in the speed and type of weathering observed. As such, it is very important to establish relationships between behaviour quantified in a laboratory environment with that observed in the field. The slake durability test is the laboratory test most commonly used to evaluate the relationship between slaking behaviour and rock durability. However, it has a number of disadvantages; it does not account for changes in shape and size in fragments retained in the 2 mm sieve, nor does its most commonly used index (Id2) accurately reflect weathering behaviour observed in the field. The main aim of this paper is to propose a simple methodology for characterizing the weathering behaviour of carbonate lithologies that outcrop in heterogeneous rock masses (such as Flysch slopes), for use by practitioners. To this end, the Potential Degradation Index (PDI) is proposed. This is calculated using the fragment size distribution curves taken from material retained in the drum after each cycle of the slake durability test. The number of slaking cycles has also been increased to five. Through laboratory testing of 117 samples of carbonate rocks, extracted from strata in selected slopes, 6 different rock types were established based on their slaking behaviour, and corresponding to the different weathering behaviours observed in the field.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Digital 3D Rocks: A Collaborative Benchmark for Learning Rocks Recognition

  • Riquelme, Adrián
  • Cano, Miguel
  • Tomás, Roberto
  • Jordá Bordehore, Luis
  • Pastor Navarro, José Luis
  • Benavente, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Naked eye rock recognition is an essential activity for professionals and students of geosciences, architecture and engineering. Through a hand holding rock specimen, it is usually required not only to identify the type of rock but recognize their texture and understand its expected properties mechanical and petrophysical properties. Although a wide choice of books, websites and apps are available in the literature and on the Internet, their contents are two-dimensional (2D) and static. Nowadays, the application of remote sensing techniques such as Light Detection and Ranging (LiDAR) or Structure from Motion (SfM) enable the generation of three-dimensional (3D) interactive models, which are here presented as a novel perspective of learning and practising rocks recognition. Despite limitations of the technique, 3D digital models of rocks permit their virtual visualization and manipulation to reveal parts of the specimens that are hidden in the 2D photograph, as well as details of the rock specimen’s texture such as grain and minerals size, distribution and organization along with the possibility of identifying petrological features, foliation, mineral orientations and others. This provides a novel perspective of learning and practising rocks identification. Herein, a benchmark of digital rocks collected all around the world and generated using SfM technique is presented. The rocks are organised using a straightforward classification system based on the texture jointly with a detailed description to aid the specimen recognition. A behavioural geomechanical classification is then applied. Moreover, a linked datasheet shows the engineering classification, the weathering degree, the guide physical and mechanical properties (general, and specific when available), the engineering uses and others. The information is organised on an open-access website hosted by the University of Alicante (https://web.ua.es/digitalrocks). This initiative also aims to encourage students and professionals to generate their own models and to provide the description to enlarge the repository.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Contribution to Real-Time Estimation of Crop Phenological States in a Dynamical Framework Based on NDVI Time Series: Data Fusion With SAR and Temperature

  • De Bernardis, Caleb G.
  • Vicente-Guijalba, Fernando
  • Martínez Marín, Tomás
  • Lopez-Sanchez, Juan M.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Martínez Marín, Tomás|||/items/13bcbfa7-02e3-4dbc-87a0-4efc7486838b
In this study, a methodology based in a dynamical framework is proposed to incorporate additional sources of information to normalized difference vegetation index (NDVI) time series of agricultural observations for a phenological state estimation application. The proposed implementation is based on the particle filter (PF) scheme that is able to integrate multiple sources of data. Moreover, the dynamics-led design is able to conduct real-time (online) estimations, i.e., without requiring to wait until the end of the campaign. The evaluation of the algorithm is performed by estimating the phenological states over a set of rice fields in Seville (SW, Spain). A Landsat-5/7 NDVI series of images is complemented with two distinct sources of information: SAR images from the TerraSAR-X satellite and air temperature information from a ground-based station. An improvement in the overall estimation accuracy is obtained, especially when the time series of NDVI data is incomplete. Evaluations on the sensitivity to different development intervals and on the mitigation of discontinuities of the time series are also addressed in this work, demonstrating the benefits of this data fusion approach based on the dynamic systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Iterative Filtering Based on Adaptive Chebyshev Kernel Functions for Noise Supression in Differential SAR Interferograms

  • Mestre-Quereda, Alejandro
  • Lopez-Sanchez, Juan M.
  • Selva, Jesus
  • González, Pablo J.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Mestre-Quereda, Alejandro|||/items/2c94ed0b-7761-4a20-9cb1-8a8abedcb7c6
  • Selva, Jesus|||/items/331697ab-a206-432e-be53-f373712b34be
Differential SAR Interferometry (DInSAR) is a powerful remote sensing technique employed to monitor surface displacements, such as ground subsidence or strong deformations caused by geological activity. The quality of the interferometric phase between two combined SAR images is essential for the estimation of the surface deformation. Multi-pIe decorrelation factors may degrade the quality of the measurements and, then, the development of filtering methods for noise suppression is mandatory. In this work, we propose a new strategy to improve noise reduction while preserving the original phase structure. The new method consists in an iterative filter in which noise reduction is achieved progressively. The original phase is filtered with adaptive kernels based on Chebyshev interpolation functions. The filter is especially useful for DInSAR geophysical applications, such as earthquakes or volcanic eruptions monitoring. The performance of the proposed method has been tested with both simulated data and recently acquired Sentinel-1 SAR data which mapped the August 2016 Central Italy earthquake.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A multi-sensor approach for monitoring a road bridge in the Valencia harbor (SE Spain) by SAR Interferometry (InSAR)

  • Del Soldato, Matteo
  • Tomás, Roberto
  • Pont Castillo, Javier
  • Herrera García, Gerardo
  • García Lopez-Davalillos, Juan Carlos
  • Mora, Oscar
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Settlement and angular distortion affecting the construction can cause damages on structures and they could compromise the serviceability of the structure. This work focuses on the monitoring of a bridge located on the south part of the Valencia harbor that shows some opening joints and depressions in the pavement of both transition areas between the abutments and the embankments. For this purpose Advanced Differential Interferometry is used to exploit Synthetic Aperture Radar images (SAR) acquired by ALOS and Cosmo-SkyMed satellite sensors from February 2007 to July 2010 and from May 2010 to August 2012, respectively. This approach permitted to estimate surficial displacements, to identify areas of bridge affected by settlements and angular distortion and to relate them with the observed damages.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multitechnical approach for damage assessment and reinforcement of buildings located on subsiding areas: Study case of a 7-story RC building in Murcia (SE Spain)

  • Díaz Castañeda, Esteban
  • Robles Marín, Pedro
  • Tomás, Roberto
  • Díaz Castañeda, Esteban|||/items/74c6c9e7-e9d0-4fec-b740-4b57680cb6e0
  • Robles Marín, Pedro|||/items/4446ed83-11b7-4b76-88ba-ac9ae4935426
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
The work presented herein proposes a multitechnical methodology for damage assessment and reinforcement of buildings located on areas affected by land subsidence induced by water withdrawal. The proposed methodology is illustrated by a comprehensive damage assessment and subsequent reinforcement of a 7-story reinforced concrete building located in the city of Murcia (SE Spain). Construction took place in the 1980s and the building was severely damaged by differential settlements caused by land subsidence throughout time. The building suffered an important tilting, presenting maximum settlement of 260 mm and a maximum horizontal displacement at the top of the building of 177 mm, which considerably reduced its habitability and security conditions. Damage began to manifest in 1995, coinciding with an intense drought that affected the Murcia area between 1991 and 1995. Average piezometric level decreases of at least 8 m were verified, reaching 10 m in the nearby areas of the building. These piezometric level decreases caused important consolidation settlements that seriously damaged the structure of the building. The proposed multitechnical damage assessment methodology was used to characterize the causes of damage, design reinforcement actions, and carry out subsequent monitoring to guarantee the structural stability of the building.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Using open-source software for extracting geomechanical parameters of a rock mass from 3D point clouds: Discontinuity set extractor and SMRTool

  • Riquelme, Adrián
  • Cano, Miguel
  • Tomás, Roberto
  • Abellán Fernández, Antonio
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
New 3D data acquisition techniques allow to obtain geometrical information of exposed rock masses. This information can be used to characterize some geo-mechanical parameters of rock slopes, allowing users to remotely obtain information. Recently, many researchers have been working on the extraction of geo-mechanical parameters of rock masses using 3D point clouds, such as the number of discontinuity sets and their orientations, the normal spacing and the persistence. In this contribution we use two novel open source programs: (1) Discontinuity Set Extractor (DSE) aids to analyse 3D point clouds detecting the number of discontinuity sets, classifying each point with its discontinuity set and plane equation and calculating their normal spacing; and (2) SMRTool calculates the geo-mechanical quality of a rock slope by means of the Slope Mass Rating (SMR) index. In order to illustrate the use of the two software programs, we analyse the geo-mechanical quality a slope placed in the National route N-332 in El Campello (Alicante, Spain), in the named Flysch sequence of Alicante, using 3D point clouds. The 3D point cloud was analysed using the previously mentioned open-access tools. Their use allowed to extract the discontinuity sets, normal spacing and persistence using a software which code can be inspected and improved without cost. Moreover, it allows to reproduce the full analysis process using the same method parameters.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Exploitation of Satellite A-DInSAR Time Series for Detection, Characterization and Modelling of Land Subsidence

  • Bonì, Roberta
  • Meisina, Claudia
  • Cigna, Francesca
  • Herrera García, Gerardo
  • Notti, Davide
  • Bricker, Stephanie
  • McCormack, Harry
  • Tomás, Roberto
  • Béjar Pizarro, Marta
  • Mulas de la Peña, Joaquín
  • Ezquerro Martín, Pablo
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
In the last two decades, advanced differential interferometric synthetic aperture radar (A-DInSAR) techniques have experienced significant developments, which are mainly related to (i) the progress of satellite SAR data acquired by new missions, such as COSMO-SkyMed and ESA’s Sentinel-1 constellations; and (ii) the development of novel processing algorithms. The improvements in A-DInSAR ground deformation time series need appropriate methodologies to analyse extremely large datasets which consist of huge amounts of measuring points and associated deformation histories with high temporal resolution. This work demonstrates A-DInSAR time series exploitation as valuable tool to support different problems in engineering geology such as detection, characterization and modelling of land subsidence mechanisms. The capabilities and suitability of A-DInSAR time series from an end-user point of view are presented and discussed through the analysis carried out for three test sites in Europe: the Oltrepo Pavese (Po Plain in Italy), the Alto Guadalentín (Spain) and the London Basin (United Kingdom). Principal component analysis has been performed for the datasets available for the three case histories, in order to extract the great potential contained in the A-DInSAR time series.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Estudio comparativo del potencial de licuación de suelos usando las normas españolas y el Eurocódigo, Comparative study of soil liquefaction potential using Spanish codes and the Eurocode

  • Pastor Navarro, José Luis
  • Tomás, Roberto
  • Cano, Miguel
  • Riquelme, Adrián
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
La licuación es un proceso por el que una masa de suelo saturado, generalmente granular y de baja compacidad, disminuye drásticamente su resistencia por un aumento de su presión de poro, habitualmente asociado a cargas monotónicas o cíclicas, tales como las inducidas por los eventos sísmicos. Este efecto es recogido tanto por diversas normativas españolas como por el Anejo Nacional Español del Eurocódigo. En este trabajo se realiza un estudio comparativo sobre las diferencias y similitudes en la metodología de comprobación del potencial de licuación empleado en las diferentes normativas. Asimismo, con objeto de cuantificar las diferencias observadas, se ha determinado el factor de seguridad frente a la licuación para tres casos reales de suelos de la provincia de Alicante. En función de los resultados obtenidos se puede concluir que existen diferencias, en algunos casos significativas, en el factor de seguridad obtenido.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multisource data integration to investigate one century of evolution for the Agnone landslide (Molise, southern Italy)

  • Del Soldato, Matteo
  • Riquelme, Adrián
  • Bianchini, Silvia
  • Tomás, Roberto
  • Di Martire, Diego
  • De Vita, Pantaleone
  • Moretti, Sandro
  • Calcaterra, Domenico
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Landslides are one of the most relevant geohazards worldwide, causing direct and indirect costs and fatalities. Italy is one of the countries most affected by mass movements, and the Molise region, southern Italy, is known to be susceptible to erosional processes and landslides. In January 2003, a landslide in the municipality of Agnone, in the Colle Lapponi-Piano Ovetta (CL-PO) territory, occurred causing substantial damage to both structures and civil infrastructure. To investigate the evolution of the landslide-affected catchment over approximately one century, different data were taken into account: (i) literature information at the beginning of the twentieth century; (ii) historical sets of aerial optical photographs to analyse the geomorphological evolution from 1945 to 2003; (iii) SAR (Synthetic Aperture Radar) data from the ERS1/2, ENVISAT and COSMO-SkyMed satellites to monitor the displacement from 1992 to 2015; (iv) traditional measurements carried out through geological and geomorphological surveys, inclinometers and GPS campaigns to characterize the geological setting of the area; and (v) recent optical photographs of the catchment area to determine the enlargement of the landslide. Using the structure from motion technique, a 3D reconstruction of each set of historical aerial photographs was made to investigate the geomorphological evolution and to trace the boundary of the mass movements. As a result, the combination of multitemporal and multitechnique analysis of the evolution of the CL-PO landslide enabled an assessment of the landslide expansion, which resulted in a maximum length of up to approximately 1500 m. A complete investigation of the past and present deformational sequences of the area was performed to potentially plan further mitigation and prevention strategies to avoid possible reactivations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of the Double-Bounce Contribution in PolInSAR-Based Height Estimates of Rice Crops Using TanDEM-X Bistatic Data

  • Romero-Puig, Noelia
  • Lopez-Sanchez, Juan M.
  • Ballester-Berman, J. David
  • Ballester-Berman, J. David|||/items/a6960cca-2ad9-4d2b-ab77-465bf799fba8
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
In bistatic acquisitions the presence of a double-bounce contribution at the ground affects the interferometric coherence with a decorrelation factor which is usually overlooked in studies employing polarimetric SAR interferometry. The standard acquisition mode of TanDEM-X is bistatic, so the influence of this contribution in the estimation of scene parameters (ground topography and vegetation height) is studied here. The analysis is carried out both with simulations and real data acquired over rice fields during the science phase of TanDEM-X. Results show that the error in height and topography is small when incidence angle is below 30 degrees, but may become noticeable for shallower incidences.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Rockfall Simulation Based on UAV Photogrammetry Data Obtained during an Emergency Declaration: Application at a Cultural Heritage Site

  • Sarro, Roberto
  • Riquelme, Adrián
  • García-Davalillo, Juan Carlos
  • Mateos, Rosa María
  • Tomás, Roberto
  • Pastor Navarro, José Luis
  • Cano, Miguel
  • Herrera García, Gerardo
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
In recent years, there was an increasing number of studies focusing on rockfalls due to their impacts on social and sustainable development. This work carries out a three-dimensional (3D) simulation of rockfalls at a cultural heritage site nearby the village of Cortes de Pallás (Valencian Community, East Spain). The simulation is based on data collected previously, during an emergency declaration due to the occurrence of a considerable rockfall (7980 m3) on the southern bank of the Cortes de Pallás reservoir, on 6 April 2015. The hydroelectric power plant was damaged, and the main access road to the village of Cortes de Pallás was blocked for eight months. The predominant discontinuities of the rock mass were analyzed by means of the application of structure from motion (SfM) photogrammetry techniques to the set of images taken by remotely piloted aircraft systems (RPAS). The average size of the block was determined as 3.2 m in diameter and 17.6 m3 in volume. Additionally, a digital elevation model (DEM) was generated from an aerial laser scanning (ALS)-derived point cloud using a 1 × 1 grid. These data were implemented in RocPro3D software, obtaining the distances traveled by the blocks detached from different source areas at a cultural heritage site located near the rockfall event, which presents the same geological context. The simulation presented herein shows aggravating circumstances that endanger the cultural heritage area, with higher rockfall hazards than previous official studies (1991) displayed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A Complete Procedure for Crop Phenology Estimation With PolSAR Data Based on the Complex Wishart Classifier

  • Mascolo, Lucio
  • Lopez-Sanchez, Juan M.
  • Vicente-Guijalba, Fernando
  • Nunziata, Ferdinando
  • Migliaccio, Maurizio
  • Mazzarella, Giuseppe
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
A new methodology to estimate the growth stages of agricultural crops using the time series of polarimetric synthetic aperture radar (PolSAR) images is proposed. The methodology is based on the complex Wishart classifier and both phenological intervals and training areas are identified measuring the distances among polarimetric covariance matrices obtained from the time series of PolSAR data. Consequently, the computation of PolSAR features, which is the main step of state-of-the-art methods, is no longer needed, and the proposed approach can be applied in the same way to any crop type. Experiments undertaken on a dense time series of fully polarimetric C-band RADARSAT-2 images, collected at incidence angles ranging from 23° to 39°, in ascending/descending orbit passes, demonstrate that the proposed methodology can be successfully applied to retrieve the phenological stages of four different crop types. In addition, the effect of combining beams corresponding to different sensor's configurations has been evaluated, showing that it affects the retrieval accuracies. Validation with ground data shows the following: overall accuracy is between 54% and 86%; producer's accuracy (PA) and user's accuracy (UA) range between 21% and 100% and between 33% and 100%, respectively.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Discontinuity spacing analysis in rock masses using 3D point clouds

  • Riquelme, Adrián
  • Abellán Fernández, Antonio
  • Tomás, Roberto
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
The complete characterization of rock masses implies the acquisition of information of both, the materials which compose the rock mass and the discontinuities which divide the outcrop. Recent advances in the use of remote sensing techniques – such as Light Detection and Ranging (LiDAR) – allow the accurate and dense acquisition of 3D information that can be used for the characterization of discontinuities. This work presents a novel methodology which allows the calculation of the normal spacing of persistent and non-persistent discontinuity sets using 3D point cloud datasets considering the three dimensional relationships between clusters. This approach requires that the 3D dataset has been previously classified. This implies that discontinuity sets are previously extracted, every single point is labeled with its corresponding discontinuity set and every exposed planar surface is analytically calculated. Then, for each discontinuity set the method calculates the normal spacing between an exposed plane and its nearest one considering 3D space relationship. This link between planes is obtained calculating for every point its nearest point member of the same discontinuity set, which provides its nearest plane. This allows calculating the normal spacing for every plane. Finally, the normal spacing is calculated as the mean value of all the normal spacings for each discontinuity set. The methodology is validated through three cases of study using synthetic data and 3D laser scanning datasets. The first case illustrates the fundamentals and the performance of the proposed methodology. The second and the third cases of study correspond to two rock slopes for which datasets were acquired using a 3D laser scanner. The second case study has shown that results obtained from the traditional and the proposed approaches are reasonably similar. Nevertheless, a discrepancy between both approaches has been found when the exposed planes members of a discontinuity set were hard to identify and when the planes pairing was difficult to establish during the fieldwork campaign. The third case study also has evidenced that when the number of identified exposed planes is high, the calculated normal spacing using the proposed approach is minor than those using the traditional approach.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Characterization of rock slopes through slope mass rating using 3D point clouds

  • Riquelme, Adrián
  • Tomás, Roberto
  • Abellán Fernández, Antonio
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Rock mass classification systems are widely used tools for assessing the stability of rock slopes. Their calculation requires the prior quantification of several parameters during conventional fieldwork campaigns, such as the orientation of the discontinuity sets, the main properties of the existing discontinuities and the geo-mechanical characterization of the intact rock mass, which can be time-consuming and an often risky task. Conversely, the use of relatively new remote sensing data for modelling the rock mass surface by means of 3D point clouds is changing the current investigation strategies in different rock slope engineering applications. In this paper, the main practical issues affecting the application of Slope Mass Rating (SMR) for the characterization of rock slopes from 3D point clouds are reviewed, using three case studies from an end-user point of view. To this end, the SMR adjustment factors, which were calculated from different sources of information and processes, using the different softwares, are compared with those calculated using conventional fieldwork data. In the presented analysis, special attention is paid to the differences between the SMR indexes derived from the 3D point cloud and conventional field work approaches, the main factors that determine the quality of the data and some recognized practical issues. Finally, the reliability of Slope Mass Rating for the characterization of rocky slopes is highlighted.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Digital landform reconstruction using old and recent open access digital aerial photos

  • Riquelme, Adrián
  • Del Soldato, Matteo
  • Tomás, Roberto
  • Cano, Miguel
  • Jordá Bordehore, Luis
  • Moretti, Sandro
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Technological progress in remote sensing has enabled digital representation of terrain through new techniques (e.g. digital photogrammetry) and instruments (e.g. 3D laser scanners). However, the use of old aerial images remains important in geosciences to reconstruct past landforms and detect long-term topographic changes. Administrations have recently expressed growing interest in sharing photogrammetric datasets on public repositories, providing opportunities to exploit these resources and detect natural and anthropogenic topographic changes. The SfM-MVS photogrammetric technique was applied to scanned historical black and white aerial photos of the Serra de Fontcalent (Alicante, Spain), as well as to recent high-quality digital aerial photos. Ground control points (GCPs) extracted from a LiDAR-derived three-dimensional point cloud were used to georeference the results with non-linear deformations. Two point clouds obtained with SfM-MVS were compared with the LiDAR-derived reference point cloud. Based on the result, the quality of the models was analysed through the comparison of the stages on stable areas, i.e., lands where no variations were detected, and active areas, with quarries, new infrastructures, fillings, excavations or new buildings. This study also indicates that errors are higher for old aerial photos (up to 5 m on average) than recent digital photos (up to 0.5 m). The application of SfM-MVS to open access data generated 3D models that enhance the geomorphological analysis, compared to stereophotogrammetry, and effectively detected activities in quarries and building of landfills.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A New Polarimetric Persistent Scatterer Interferometry Method Using Temporal Coherence Optimization

  • Sadeghi, Zahra
  • Valadan Zoej, Mohammad Javad
  • Hooper, Andrew
  • Lopez-Sanchez, Juan M.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
While polarimetric persistent scatterer InSAR (PSI) is an effective technique for increasing the number and quality of selected PS pixels, existing methods are suboptimal; a polarimetric channel combination is selected for each pixel based either on amplitude, which works well only for high-amplitude scatterers such as man-made structures, or on the assumption that pixels in a surrounding window all have the same scattering mechanism. In this paper, we present a new polarimetric PSI method in which we use a phase-based criterion to select the optimal channel for each pixel, which can work well even in nonurban environments. This algorithm is based on polarimetric optimization of temporal coherence, as defined in the Stanford Method for PS (StaMPS), to identify the scatterers with stable phase characteristics. We form all possible copolar and cross-polar interferograms from the available polarimetric channels and find the optimum coefficients for each pixel using defined search spaces to optimize the temporal coherence. We apply our algorithm, PolStaMPS, to an area in the Tehran basin that is covered primarily by vegetation. Our results confirm that the algorithm substantially improves on StaMPS performance, increasing the number of PS pixels by 48%, 80%, and 82% with respect to HH+VV, VV, and HH channels, respectively, and increasing the signal-to-noise ratio of selected pixels.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Earth Observations for Geohazards: Present and Future Challenges

  • Tomás, Roberto
  • Li, Zhenhong
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Earth Observations (EO) encompasses different types of sensors (e.g., Synthetic Aperture Radar, Laser Imaging Detection and Ranging, Optical and multispectral) and platforms (e.g., satellites, aircraft, and Unmanned Aerial Vehicles) and enables us to monitor and model geohazards over regions at different scales in which ground observations may not be possible due to physical and/or political constraints. EO can provide high spatial, temporal and spectral resolution, stereo-mapping and all-weather-imaging capabilities, but not by a single satellite at a time. Improved satellite and sensor technologies, increased frequency of satellite measurements, and easier access and interpretation of EO data have all contributed to the increased demand for satellite EO data. EO, combined with complementary terrestrial observations and with physical models, have been widely used to monitor geohazards, revolutionizing our understanding of how the Earth system works. This Special Issue presents a collection of scientific contributions focusing on innovative EO methods and applications for monitoring and modeling geohazards, consisting of four Sections: (1) earthquake hazards; (2) landslide hazards; (3) land subsidence hazards; and (4) new EO techniques and services.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A Modified Dual-Baseline PolInSAR Method for Forest Height Estimation

  • Xie, Qinghua
  • Zhu, Jianjun
  • Wang, Changcheng
  • Fu, Haiqiang
  • Lopez-Sanchez, Juan M.
  • Ballester-Berman, J. David
  • Ballester-Berman, J. David|||/items/a6960cca-2ad9-4d2b-ab77-465bf799fba8
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
This paper investigates the potentials and limitations of a simple dual-baseline PolInSAR (DBPI) method for forest height inversion. This DBPI method follows the classical three-stage inversion method’s idea used in single baseline PolInSAR (SBPI) inversion, but it avoids the assumption of the smallest ground-to-volume amplitude ratio (GVR) by employing an additional baseline to constrain the inversion procedure. In this paper, we present for the first time an assessment of such a method on real PolInSAR data over boreal forest. Additionally, we propose an improvement on the original DBPI method by incorporating the sloped random volume over ground (S-RVoG) model in order to reduce the range terrain slope effect. Therefore, a digital elevation model (DEM) is needed to provide the slope information in the proposed method. Three scenes of P-band airborne PolInSAR data acquired by E-SAR and light detection and ranging (LIDAR) data available in the BioSAR2008 campaign are employed for testing purposes. The performance of the SBPI, DBPI, and modified DBPI methods is compared. The results show that the DBPI method extracts forest heights with an average root mean square error (RMSE) of 4.72 m against LIDAR heights for trees of 18 m height on average. It presents a significant improvement of forest height accuracy over the SBPI method (with a stand-level mean improvement of 42.86%). Concerning the modified DBPI method, it consistently improves the accuracy of forest height inversion over sloped areas. This improvement reaches a stand-level mean of 21.72% improvement (with a mean RMSE of 4.63 m) for slopes greater than 10°.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A Modified General Polarimetric Model-Based Decomposition Method With the Simplified Neumann Volume Scattering Model

  • Xie, Qinghua
  • Zhu, Jianjun
  • Lopez-Sanchez, Juan M.
  • Wang, Changcheng
  • Fu, Haiqiang
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
This letter proposes a modified general polarimetric model-based decomposition method which includes a simplified Neumann volume scattering model (SNVSM). This is useful to avoid a known limitation in one of the state-of-the-art general model-based decomposition methods (i.e., Chen's method), which considers only four possible discrete volume scattering models. Two types of SNVSM, assuming horizontal or vertical dipoles, are derived from the Neumann volume scattering model. The resulting volume coherency matrix exhibits a continuous range of volume scattering models. In addition, this volume model covers both random and nonrandom volume cases, which are distinguished by a randomness parameter. Monte Carlo simulations are used to test this approach. The proposed method with SNVSM overall improves the final accuracy of estimated parameters in comparison with the original approach and shows consistency with another existing generalized volume scattering model (GVSM). In addition, results from two fully polarimetric C- and L-band AIRSAR images over San Francisco region show that the proposed method produces reasonably physical results and outperforms the traditional Y4R method. Finally, the differences obtained between SNVSM and GVSM in two building areas show the potential advantage of SNVSM in identifying more types of volume scenes than that of GVSM.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Assessment of landslide-induced damage to structures: the Agnone landslide case study (southern Italy)

  • Del Soldato, Matteo
  • Di Martire, Diego
  • Bianchini, Silvia
  • Tomás, Roberto
  • De Vita, Pantaleone
  • Ramondini, Massimo
  • Casagli, Nicola
  • Calcaterra, Domenico
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Landslides are among the most important and frequent natural calamities that cause severe socio-economic and human losses. After earthquakes, landslides are responsible for the greatest number of casualties and the largest amount of damage to man-made structures. On average, southern Italy is affected by a high spatial density of landslides due to its complex geological setting, which often predisposes it to slope instability phenomena under both natural and anthropogenic influences. Structurally complex formations are widespread in the southern Apennines and are characterized by high heterogeneity and very poor mechanical properties. Thus, these formations represent one of the main factors contributing to the predisposition of slopes to landsliding. In this paper, landslide-induced damage was investigated and analyzed in an area within the municipality of Agnone (Molise region), which is affected by a complex landslide that involves a structurally complex formation. The approaches used were based on six different methods that have previously been described in the literature, and a comparison of the results was made. Data regarding the damage, which consists largely of cracks observed in buildings and at the ground, were compiled through field surveys. The results were critically analyzed to note the advantages and constraints of each classification scheme. The aim of the work was to apply and compare different approaches in order to test the best and most accurate procedures for assessing damage due to landslides at the scale of individual buildings as well as to provide an objective assessment of the degree of landslide damage to structures and facilities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Retrieval of agricultural crop height from space: A comparison of SAR techniques

  • Erten, Esra
  • Lopez-Sanchez, Juan M.
  • Yuzugullu, Onur
  • Hajnsek, Irena
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
This paper deals with the retrieval of agricultural crop height from space by using multipolarization Synthetic Aperture Radar (SAR) images. Coherent and incoherent crop height estimation methods are discussed for the first time with a unique TanDEM-X dataset acquired over rice cultivation areas. Indeed, with its polarimetric and interferometric capabilities, the TanDEM-X mission enables the tracking of crop height through interferometric SAR (InSAR), polarimetric interferometric SAR (PolInSAR) and the inversion of radiative transfer-based backscattering model. The paper evaluates the three aforementioned techniques simultaneously with a data set acquired in September 2014 and 2015 over rice fields in Turkey during their reproductive stage. The assessment of the absolute height accuracy and the limitations of the approaches are provided. In-situ measurements conducted in the same cultivation periods are used for validation purposes. The PolInSAR and morphological backscattering model results showed better performance with low RMSEs (12 and 13 cm) compared to the differential InSAR result having RMSE of 18 cm. The spatial baseline, i.e. the distance between satellites, is a key parameter for coherent methods such as InSAR and PolInSAR. Its effect on the absolute height accuracy is discussed using TanDEM-X pairs separated by a baseline of 101.7m and 932m. Although the InSAR based approach is demonstrated to provide sufficient crop height accuracy, the availability of a precise vegetation-free digital elevation model and a structurally dense crop are basic requirements for achieving high accuracy. The PolInSAR approach provides reliable crop height estimation if the spatial baseline is large enough for the inversion. The impact of increasing spatial baseline on the absolute accuracy of the crop height estimation is evident for both methods. However, PolInSAR is more cost-efficient, e.g. there is no need for phase unwrapping and any external vegetation free surface elevation data. Instead, the usage of radiative transfer based backscattering models provides not only crop height but also other biophysical properties of the crops with consistent accuracy. The efficient retrieval of crop height with backscattering model is achieved by metamodelling, which makes the computational cost of backscattering inversion comparable to the ones of the coherent methods. However, effectiveness depends on not only the backscattering model, but also the integration of agronomic crop growth rules. Motivated by these results, a combination of backscattering and PolInSAR inversion models would provide a successful method of future precision farming studies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

On the Use of Generalized Volume Scattering Models for the Improvement of General Polarimetric Model-Based Decomposition

  • Xie, Qinghua
  • Ballester-Berman, J. David
  • Lopez-Sanchez, Juan M.
  • Zhu, Jianjun
  • Wang, Changcheng
  • Ballester-Berman, J. David|||/items/a6960cca-2ad9-4d2b-ab77-465bf799fba8
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Recently, a general polarimetric model-based decomposition framework was proposed by Chen et al., which addresses several well-known limitations in previous decomposition methods and implements a simultaneous full-parameter inversion by using complete polarimetric information. However, it only employs four typical models to characterize the volume scattering component, which limits the parameter inversion performance. To overcome this issue, this paper presents two general polarimetric model-based decomposition methods by incorporating the generalized volume scattering model (GVSM) or simplified adaptive volume scattering model, (SAVSM) proposed by Antropov et al. and Huang et al., respectively, into the general decomposition framework proposed by Chen et al. By doing so, the final volume coherency matrix structure is selected from a wide range of volume scattering models within a continuous interval according to the data itself without adding unknowns. Moreover, the new approaches rely on one nonlinear optimization stage instead of four as in the previous method proposed by Chen et al. In addition, the parameter inversion procedure adopts the modified algorithm proposed by Xie et al. which leads to higher accuracy and more physically reliable output parameters. A number of Monte Carlo simulations of polarimetric synthetic aperture radar (PolSAR) data are carried out and show that the proposed method with GVSM yields an overall improvement in the final accuracy of estimated parameters and outperforms both the version using SAVSM and the original approach. In addition, C-band Radarsat-2 and L-band AIRSAR fully polarimetric images over the San Francisco region are also used for testing purposes. A detailed comparison and analysis of decomposition results over different land-cover types are conducted. According to this study, the use of general decomposition models leads to a more accurate quantitative retrieval of target parameters. However, there exists a trade-off between parameter accuracy and model complexity which constrains the physical validity of solutions and must be further investigated.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Optimización polarimétrica de interferogramas diferenciales aislados correspondientes a eventos geológicos, Polarimetric optimisation methods applied to single differential SAR interferograms for geophysical events

  • Mestre-Quereda, Alejandro
  • Lopez-Sanchez, Juan M.
  • Ballester-Berman, J. David
  • Selva, Jesus
  • González, Pablo J.
  • Hooper, Andrew
  • Wright, Timothy J.
  • Ballester-Berman, J. David|||/items/a6960cca-2ad9-4d2b-ab77-465bf799fba8
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Mestre-Quereda, Alejandro|||/items/2c94ed0b-7761-4a20-9cb1-8a8abedcb7c6
  • Selva, Jesus|||/items/331697ab-a206-432e-be53-f373712b34be
Con el fin de conseguir valores más fiables y continuos de fase diferencial, para así facilitar la posterior interpretación de un suceso geológico en base a los modelos geofísicos disponibles, se han probado diferentes métodos de optimización basados en polarimetría para pares interferométricos de imágenes SAR. Se han empleado datos adquiridos en polarización completa mediante el satélite RADARSAT-2 y que se corresponden con la erupción volcánica del Monte Etna (Italia) en 2008. La optimización polarimétrica se ha llevado a cabo mediante una combinación de los canales polarimétricos disponibles, de modo que se explora el espacio polarimétrico para mejorar el producto final.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Estimación de la altura de arrozales mediante interferometría polarimétrica SAR en banda X, Estimation of rice height by polarimetric SAR interferometry at X-band

  • Lopez-Sanchez, Juan M.
  • Vicente-Guijalba, Fernando
  • Romero-Puig, Noelia
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
La interferometría polarimétrica SAR (PolInSAR) es una técnica de teledetección con radar capaz de medir variables estructurales de escenas con vegetación, como la altura de las plantas, pero históricamente ha sido empleada en bosques y sobre todo con datos medidos por sensores aerotransportados. Este trabajo presenta los resultados obtenidos al aplicar esta técnica por vez primera sobre escenas agrícolas (arrozales) empleando datos de satélite. Para ello se adquirieron series temporales de pares de imágenes mediante el sensor TanDEM-X, empleando una línea de base suficientemente grande. Las pruebas se han desarrollado en arrozales de las provincias de Sevilla y Valencia. Las alturas estimadas presentan un error cuadrático medio menor de 10 cm para plantas mayores de 25-50 cm. Las estimaciones han sido validadas con datos de campo y se ha analizado la influencia tanto de la línea de base como del ángulo de incidencia.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

ML Estimation and Detection of Multiple Frequencies Through Periodogram Estimate Refinement

  • Selva, Jesus
  • Selva, Jesus|||/items/331697ab-a206-432e-be53-f373712b34be
This letter presents a method to detect and estimate multiple frequencies based on the maximum-likelihood principle. The method addresses the three main difficulties in this kind of computation, which are the detection of the number of frequencies, the coarse localization of the cost function's global maximum, and the iterative refinement of an initial estimate. Fundamentally, it consists of first detecting and estimating single frequencies or frequency clusters using the periodogram, and then refining this last estimate through a Newton-type method. This second step is fast because its complexity is independent of the number of samples, once a single fast Fourier transform (FFT) has been computed. These two steps are iteratively repeated until no mode frequency is above a fixed detection threshold. The main advantage of the proposed method is its low complexity, given that its computational burden is just that of a few FFTs in typical scenarios. The method is assessed in a numerical example.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Automatic Mapping of Discontinuity Persistence on Rock Masses Using 3D Point Clouds

  • Riquelme, Adrián
  • Tomás, Roberto
  • Cano, Miguel
  • Pastor Navarro, José Luis
  • Abellán Fernández, Antonio
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Finding new ways to quantify discontinuity persistence values in rock masses in an automatic or semi-automatic manner is a considerable challenge, as an alternative to the use of traditional methods based on measuring patches or traces with tapes. Remote sensing techniques potentially provide new ways of analysing visible data from the rock mass. This work presents a methodology for the automatic mapping of discontinuity persistence on rock masses, using 3D point clouds. The method proposed herein starts by clustering points that belong to patches of a given discontinuity. Coplanar clusters are then merged into a single group of points. Persistence is measured in the directions of the dip and strike for each coplanar set of points, resulting in the extraction of the length of the maximum chord and the area of the convex hull. The proposed approach is implemented in a graphic interface with open source software. Three case studies are utilized to illustrate the methodology: (1) small-scale laboratory setup consisting of a regular distribution of cubes with similar dimensions, (2) more complex geometry consisting of a real rock mass surface in an excavated cavern and (3) slope with persistent sub-vertical discontinuities. Results presented good agreement with field measurements, validating the methodology. Complexities and difficulties related to the method (e.g., natural discontinuity waviness) are reported and discussed. An assessment on the applicability of the method to the 3D point cloud is also presented. Utilization of remote sensing data for a more objective characterization of the persistence of planar discontinuities affecting rock masses is highlighted herein.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Use of artificial neural networks to predict 3-D elastic settlement of foundations on soils with inclined bedrock

  • Díaz Castañeda, Esteban
  • Brotons, Vicente
  • Tomás, Roberto
  • Díaz Castañeda, Esteban|||/items/74c6c9e7-e9d0-4fec-b740-4b57680cb6e0
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
The application of the theory of elasticity for the calculation of foundation settlements has yielded equations that are well-established and consolidated in geotechnical standards and/or that are recommended for use. These equations are corrected by an influence factor in order to increase their precision and to encompass the existing complex geotechnical casuistry. The study presented herein utilizes neural networks to improve the determination of the influence factor (Iα), which considers the effect of a finite elastic half-space limited by the inclined bedrock under a foundation. The results obtained through the utilization of artificial neural networks (ANNs) demonstrate a notable improvement in the predicted values for the influence factor in comparison with those of existing analytical equations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

3-D Morphological Change Analysis of a Beach with Seagrass Berm Using a Terrestrial Laser Scanner

  • Corbí, Hugo
  • Riquelme, Adrián
  • Megías, Clara
  • Abellán Fernández, Antonio
  • Corbí, Hugo|||/items/6b9064af-de45-4355-8ece-2ad15bdb692b
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
Along many Mediterranean coasts, the detached seagrass material of Posidonia oceanica creates seagrass berms that control the structure and morphodynamics of sandy beaches. Here, we show how Terrestrial Laser Scanner remote sensing data allows analyzing the 3-D morphologic change of beaches where this characteristic geomorphic structure is present. We propose a methodology for estimating accretion/erosion (almost −200 m3 in our study) by considering the sand dominated and seagrass berms as two independent elements. For this purpose, two different sampling dates (named scenarios A and B, before and after an erosive heavy storms period, respectively) recorded in a microtidal pocket-beach (300 m2) with these characteristic geomorphic structures have been modeled in 3-D. The present approach constitutes a cost-efficient, accurate, and quick tool to survey the sand volume in natural and artificial replenished beaches. The innovative approach, which can be considered as a conceptual and methodological starting point, can be useful to examine long-term and high-precision data sets in future studies of the morphodynamic evolution of these characteristic Mediterranean beaches.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Evaluation of the Multilook Size in Polarimetric Optimization of Differential SAR Interferograms

  • Mestre-Quereda, Alejandro
  • Lopez-Sanchez, Juan M.
  • Ballester-Berman, J. David
  • González, Pablo J.
  • Hooper, Andrew
  • Wright, Timothy J.
  • Ballester-Berman, J. David|||/items/a6960cca-2ad9-4d2b-ab77-465bf799fba8
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Mestre-Quereda, Alejandro|||/items/2c94ed0b-7761-4a20-9cb1-8a8abedcb7c6
The interferometric coherence is a measure of the correlation between two SAR images and constitutes a commonly used estimator of the phase quality. Its estimation requires a spatial average within a 2-D window, usually named as multilook. The multilook processing allows reducing noise at the expenses of a resolution loss. In this letter, we analyze the influence of the multilook size while applying a polarimetric optimization of the coherence. The same optimization algorithm has been carried out with different multilook sizes and also with the nonlocal SAR filter filter, which has the advantage of preserving the original resolution of the interferogram. Our experiments have been carried out with a single pair of quad-polarimetric RADARSAT-2 images mapping the Mount Etna's volcanic eruption of May 2008. Results obtained with this particular data set show that the coherence is increased notably with respect to conventional channels when small multilook sizes are employed, especially over low-vegetated areas. Conversely, very decorrelated areas benefit from larger multilook sizes but do not exhibit an additional improvement with the polarimetric optimization.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

An Improved Phase Filter for Differential SAR Interferometry Based on an Iterative Method

  • Mestre-Quereda, Alejandro
  • Lopez-Sanchez, Juan M.
  • Selva, Jesus
  • González, Pablo J.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
  • Mestre-Quereda, Alejandro|||/items/2c94ed0b-7761-4a20-9cb1-8a8abedcb7c6
  • Selva, Jesus|||/items/331697ab-a206-432e-be53-f373712b34be
Phase quality is a key element in the analysis of the deformation of the Earth's surface carried out with differential synthetic aperture radar interferometry. Various decorrelation sources may degrade the surface deformation estimates, and thus, phase filters are needed for this kind of application. The well-known Goldstein filter is the most widely used due to its simple implementation and computational efficiency. In the past years, improved filters have been proposed, which are based on this filter but introduce variations in the data processing. The effectiveness of these filters mostly depends on the size of the filtering window, the weight of the smoothed spectrum, and the kernel used to filter the spectrum. In this paper, we evaluate the performance of four of these filters and present a new method that outperforms all of them. The proposed filter is based on an iterative method in which the original phase is denoised progressively with adaptive filtering windows of different sizes. The effectiveness of the filter is controlled by the interferometric coherence, a direct indicator of the phase quality. Moreover, we introduce some modifications regarding the processing of the power spectrum. Specifically, we propose to smooth the original phase using a new filter which is based on a Chebyshev interpolation scheme. The performance of the new filter has been tested on both simulated and real interferograms, acquired by RADARSAT-2 and the Uninhabited Aerial Vehicle Synthetic Aperture Radar, which mapped two different geological events that caused surface deformation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A Novel Phenology Based Feature Subset Selection Technique Using Random Forest for Multitemporal PolSAR Crop Classification

  • Hariharan, Siddharth
  • Mandal, Dipankar
  • Tirodkar, Siddhesh
  • Kumar, Vineet
  • Bhattacharya, Avik
  • Lopez-Sanchez, Juan M.
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
Feature selection techniques intent to select a subset of features that minimizes redundancy and maximizes relevancy for classification problems in machine learning. Standard methods for feature selection in machine learning seldom take into account the domain knowledge associated with the data. Multitemporal crop classification studies with full-polarimetric synthetic aperture radar (PolSAR) data ought to consider the changes in the scattering mechanisms with their phenological growth stages. Hence, it is desirable to incorporate these changes while determining a feature subset for classification. In this study, a random forest (RF) based feature selection technique is proposed that takes into account the changes in the physical scattering mechanism with crop phenological stages for multitemporal PolSAR classification. The partial probability plot, which is an attribute of RF, provides information about the marginal effect of a polarimetric parameter on the desired crop class. Moreover, it is used to identify the specific range of a parameter where the probability of the presence of a particular crop class is high. The proposed technique identifies features that change significantly with crop phenology. The selected features are the ones whose ranges show maximum separation amongst crop classes. Additionally, the feature subset is refined by eliminating correlated features. The E-SAR L-band dataset of the AgriSAR-2006 campaign over the Demmin test site in Germany is used in this study. The classification accuracy using the novel feature selection technique is 99.12%. This is nominally better than using the features obtained from a standard feature selection method used in RF, such as mean decrease Gini (98.73%) and mean decrease accuracy (98.68%) that do not take into account the information based on crop phenology.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Retrieval of vegetation height in rice fields using polarimetric SAR interferometry with TanDEM-X data

  • Lopez-Sanchez, Juan M.
  • Vicente-Guijalba, Fernando
  • Erten, Esra
  • Campos-Taberner, Manuel
  • Garcia-Haro, Francisco Javier
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
This work presents for the first time a demonstration with satellite data of polarimetric SAR interferometry (PolInSAR) applied to the retrieval of vegetation height in rice fields. Three series of dual-pol interferometric SAR data acquired with large baselines (2–3 km) by the TanDEM-X system during its science phase (April–September 2015) are exploited. A novel inversion algorithm especially suited for rice fields cultivated in flooded soil is proposed and evaluated. The validation is carried out over three test sites located in geographically different areas: Sevilla (SW Spain), Valencia (E Spain), and Ipsala (W Turkey), in which different rice types are present. Results are obtained during the whole growth cycle and demonstrate that PolInSAR is useful to produce accurate height estimates (RMSE 10–20 cm) when plants are tall enough (taller than 25–40 cm), without relying on external reference information.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Land subsidence in Beijing and its relationship with geological faults revealed by Sentinel-1 InSAR observations

  • Hu, Leyin
  • Dai, Keren
  • Xing, Chengqi
  • Li, Zhenhong
  • Tomás, Roberto
  • Clark, Beth
  • Shi, Xianlin
  • Chen, Mi
  • Zhang, Rui
  • Qiu, Qiang
  • Lu, Yajun
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Beijing, the capital city of China, has been affected by land subsidence due to intensive groundwater extraction since 1935. Recent studies reported that the maximum subsidence occurred in the east of Beijing, reaching more than 11 cm/year till 2017. To investigate the subsidence (2015˜2017) in Beijing, in this paper, time series interferometric synthetic aperture radar (TS-InSAR) analysis was performed with 22 Sentinel-1 Terrain Observation by Progressive Scans (TOPS) mode SAR data. Results show that wide areas in the east of Beijing are subsiding with a maximum rate of 14 cm/year, which is consistent with GPS data. Detailed analysis of the obtained subsidence map reveals the existence of several characteristic near-linear boundaries within the subsiding areas. As a result of our previous three-year project, we generated the exact location, direction, and late Quaternary activity of the main potential active faults in the Beijing area. The relationship between the trace of these existing geological faults and the mentioned subsidence boundaries was investigated in detail. It is suggested that land subsidence in Beijing was mainly caused by the over-extraction of groundwater, with its spatial pattern being controlled by geological faults.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Quantitative Analysis of Polarimetric Model-Based Decomposition Methods

  • Xie, Qinghua
  • Ballester-Berman, J. David
  • Lopez-Sanchez, Juan M.
  • Zhu, Jianjun
  • Wang, Changcheng
  • Ballester-Berman, J. David|||/items/a6960cca-2ad9-4d2b-ab77-465bf799fba8
  • Lopez-Sanchez, Juan M.|||/items/f0afcfc7-e948-4fbe-8c02-93d9fafd1596
In this paper, we analyze the robustness of the parameter inversion provided by general polarimetric model-based decomposition methods from the perspective of a quantitative application. The general model and algorithm we have studied is the method proposed recently by Chen et al., which makes use of the complete polarimetric information and outperforms traditional decomposition methods in terms of feature extraction from land covers. Nevertheless, a quantitative analysis on the retrieved parameters from that approach suggests that further investigations are required in order to fully confirm the links between a physically-based model (i.e., approaches derived from the Freeman–Durden concept) and its outputs as intermediate products before any biophysical parameter retrieval is addressed. To this aim, we propose some modifications on the optimization algorithm employed for model inversion, including redefined boundary conditions, transformation of variables, and a different strategy for values initialization. A number of Monte Carlo simulation tests for typical scenarios are carried out and show that the parameter estimation accuracy of the proposed method is significantly increased with respect to the original implementation. Fully polarimetric airborne datasets at L-band acquired by German Aerospace Center’s (DLR’s) experimental synthetic aperture radar (E-SAR) system were also used for testing purposes. The results show different qualitative descriptions of the same cover from six different model-based methods. According to the Bragg coefficient ratio (i.e., β ), they are prone to provide wrong numerical inversion results, which could prevent any subsequent quantitative characterization of specific areas in the scene. Besides the particular improvements proposed over an existing polarimetric inversion method, this paper is aimed at pointing out the necessity of checking quantitatively the accuracy of model-based PolSAR techniques for a reliable physical description of land covers beyond their proven utility for qualitative features extraction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A multidisciplinary approach for the investigation of a rock spreading on an urban slope

  • Tomás, Roberto
  • Abellán Fernández, Antonio
  • Cano, Miguel
  • Riquelme, Adrián
  • Tenza-Abril, Antonio José
  • Baeza Brotons, Francisco
  • Saval Pérez, José Miguel
  • Jaboyedoff, Michel
  • Baeza Brotons, Francisco|||/items/aa91de7e-5d8e-413e-8d6a-87443b4dfe2e
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Saval Pérez, José Miguel|||/items/e08c30d7-7578-4b2e-8eb9-eebf974dd3dd
  • Tenza-Abril, Antonio José|||/items/07e0951f-fcaa-4f60-8f86-1d0ce5ca3f30
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Landslides are very complex processes controlled by multiple factors. The knowledge and characterization of these factors is essential for a comprehensive understanding of the mechanisms and kinematics of the instabilities and for an efficient design of corrective measures. The aim of this work is to combine traditional geological and geotechnical techniques with geophysical, remote sensing and forensic techniques for obtaining a whole picture of an active lateral spreading affecting the Finestrat municipality in Alicante, SE Spain. Geomorphological, geotechnical and geophysical techniques (i.e. ground penetrating radar and refraction seismic) have provided essential information about the geometry, structure and petro-physical properties of the slope. A Terrestrial Laser Scanner was used for recognizing the most important sets of discontinuities affecting the rock mass and to evaluate the activity of the landslide slope. Complementarily, a forensic analysis of the building damage completed the available datasets, yielding very useful kinematic information of the landslide. Finally, a sensitivity analysis of the stability of the rock slope has been performed considering both block toppling and block sliding models. Therefore, the multisource analysis performed in this work has allowed the identification and characterization of a complex lateral spreading, highlighting its effectiveness for a comprehensive understanding of this type of landslide.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Use of High-Quality and Common Commercial Mirrors for Scanning Close-Range Surfaces Using 3D Laser Scanners: A Laboratory Experiment

  • Riquelme, Adrián
  • Ferrer, Belén
  • Mas, David
  • Ferrer, Belén|||/items/5e5608cd-d990-430f-aaac-adb3e380bd8c
  • Mas, David|||/items/076f73d0-f11c-4386-bac8-0c993632f7d7
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
Three Dimension (3D) laser scanners enable the acquisition of millions of points of a visible object. Terrestrial laser scanners (TLS) are ground-based scanners, and nowadays the available instruments have the ability of rotating their sensor in two axes, capturing almost any point. Since many sensors can only operate in a vertical position, they cannot capture points located beneath themselves. Consequently, these instruments are generally unable to capture data in a vertical descending direction. Moreover, since the device positioning has certain requirements of space and terrain stability, it is possible that specific regions of interest are outside the reach of the laser. A possible solution is to address the laser beam towards the desired direction by means of a mirror. Common mirrors are very cheap; therefore, they are easy to manipulate and to substitute in case they get broken. However, due to their careless fabrication process, it seems reasonable to think that they are unprecise. In contrast, front-end mirrors are more expensive and delicate, and consequently, deflecting angles are more precise. In this research, we designed a laboratory test to analyze the arising noise when standard and high-quality mirrors are used during the TLS scanning process. The results show that the noise introduced when scanning through a standard mirror is higher than that produced when using a high-quality mirror. However, both cases show that this introduced error is lower than the instrumental error. As a result, this study concludes that it is reasonable to use standard mirrors when scanning in similar conditions to this laboratory test.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A software for considering leakage in water pressurized networks

  • Pardo Picazo, Miguel Ángel
  • Riquelme, Adrián
  • Pardo Picazo, Miguel Ángel|||/items/4e2a67ff-4eec-4e38-a836-45bb184b5ef6
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
A matlab‐based educational software (UAleaks) has been developed to consider the effect of water losses when solving the hydraulic problem in water pressurized networks. The results obtained are the new leaky network model and the water and energy audits calculation. This software can be used by students and practitioners.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Comparing manual and remote sensing field discontinuity collection used in kinematic stability assessment of failed rock slopes

  • Jordá Bordehore, Luis
  • Riquelme, Adrián
  • Cano, Miguel
  • Tomás, Roberto
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Este artículo propone una metodología de reconstrucción de superficies mediante SfM-MVS a partir de fotogragrafías y puntos de control replanteados con pequeños puntos de plastilina, posicionados en el talud mediante brújula.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Post-disaster assessment of 2017 catastrophic Xinmo landslide (China) by spaceborne SAR interferometry

  • Dai, Keren
  • Xu, Qiang
  • Li, Zhenhong
  • Tomás, Roberto
  • Fan, Xuanmei
  • Dong, Xiujun
  • Li, Weile
  • Zhou, Zhiwei
  • Gou, Jisong
  • Ran, Peilian
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Timely and effective post-disaster assessment is of significance for the design of rescue plan, taking disaster mitigation measures and disaster analysis. Field investigation and remote sensing methods are the common ways to perform post-disaster assessment, which are usually limited by dense cloud coverage, potential risk, and tough transportation etc. in the mountainous area. In this paper, we employ the 2017 catastrophic Xinmo landslide (Sichuan, China) to demonstrate the feasibility of using spaceborne synthetic aperture radar (SAR) data to perform timely and effective post-disaster assessment. With C-band Sentinel-1 data, we propose to combine interferometric coherence to recognize the stable area, which helps us successfully identify landslide source area and boundaries in a space-based remote sensing way. Complementarily, X-band TanDEM-X SAR data allow us to generate a precise pre-failure high-resolution digital elevation model (DEM), which provides us the ability to accurately estimate the depletion volume and accumulation volume of Xinmo landslide. The results prove that spaceborne SAR can provide a quick, valuable, and unique assistance for post-disaster assessment of landslides from a space remote sensing way. At some conditions (bad weather, clouds, etc.), it can provide reliable alternative.