Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Water-resistant hybrid perovskite solar cell -- drop triboelectric energy harvester

  • Núñez-Gálvez, Fernando
  • García-Casas, Xabier
  • Contreras-Bernal, Lidia
  • Descalzo, Alejandro
  • Obrero-Pérez, José M.
  • Castillo-Seoane, Javier
  • Ginés, Antonio J.
  • Leger, Gildas
  • Sánchez-López, J.C.
  • Espinós, J.P.
  • Barranco, Ángel
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • López-Santos, Carmen
Hybrid energy-harvesting systems combining perovskite solar cells (PSCs) with drop-driven triboelectric nanogenerators (D-TENGs) provide continuous power under various weather conditions. However, halide perovskites' vulnerability to moisture hampers widespread use. We present plasma-deposited fluorinated polymers (CFX) as multifunctional encapsulation layers offering water resistance, triboelectric functionality, and > 90 % optical transparency. These conformal, room-temperature, solvent-free coatings protect PSCs without reducing performance; encapsulated cells maintained a PCE of 17.9 %, and devices kept over 50 % of initial PCE after 10 days in high humidity and temperature. CFx layers also enabled compatibility with UV-curable resins, creating a hybrid PSC/D-TENG capable of harvesting solar and rain energy. This device retained 80 % of its performance after 300 hours of humid operation and stayed stable under continuous dripping and illumination for over 5 hours. Optimizing CFx's chemical composition improved triboelectric performance. Using the same CFx layer for encapsulation and triboelectric function, the device achieved 11.6 mA/cm2 short-circuit current under 0.5 sun and 12 V peak voltage per raindrop, enabling simultaneous solar and rain energy harvesting. A self-charging prototype powered LED arrays via a boost converter, demonstrating practical multisource energy harvesting., The authors thank the projects PID2022–143120OB-I00, PCI2024–153451 and TED2021–130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe", Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia. We also thank the Consejería de Universidad, Investigación e Innovación of Junta de Andalucía through project DGP_PIDI_2024_02239. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). XGC acknowledges the FPU program under the grant number FPU19/01864. FNG and CLS acknowledges the “VII Plan Propio de Investigación y Transferencia” of the Universidad de Sevilla. The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Water-resistant hybrid perovskite solar cell -- drop triboelectric energy harvester [Dataset]

  • Núñez-Gálvez, Fernando
  • García-Casas, Xabier
  • Contreras-Bernal, Lidia
  • Descalzo, Alejandro
  • Obrero-Pérez, José M.
  • Castillo-Seoane, Javier
  • Ginés, Antonio J.
  • Leger, Gildas
  • Sánchez-López, J.C.
  • Espinós, J.P.
  • Barranco, Ángel
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • López-Santos, Carmen
Hybrid energy-harvesting systems that combine perovskite solar cells (PSCs) with drop-driven triboelectric nanogenerators (D-TENGs) offer a compelling solution for continuous power generation under diverse weather conditions. Yet, the inherent vulnerability of halide perovskites to moisture and environmental stressors remains a critical barrier to their widespread deployment. To overcome this bottleneck, we introduce plasma-deposited fluorinated polymers (CFₓ) films as multifunctional encapsulation layers that simultaneously provide water resistance, triboelectric functionality, and optical transparency (>90 %). Plasma deposition enables conformal, room temperature, and solvent-free coating of complex surfaces, ensuring uniform protection without compromising photovoltaic performance. After encapsulation of PSCs with CFx films, power conversion efficiency remained virtually unchanged, and champion cells preserved a PCE of 17.9 %. More importantly, the devices exhibited high environmental stability, retaining over 50 % of their initial PCE for 10 days under high humidity and temperature. Furthermore, CFx layers enabled Spiro-OMeTAD compatibility with commercial UV-curable resins, leading to a thin-film hybrid PSC/D-TENG device capable of simultaneous solar and rain energy harvesting. This device maintained 80 % of its initial performance after 300 h of continuous illumination under humid conditions and demonstrated stability under continuous dripping and illumination for more than 5 h. We demonstrated that optimizing the chemical composition of CFx layers significantly enhances their triboelectric performance. In standalone operation, the optimized CFₓ-based D-TENG, enriched with 36.4 % of (CF2 + CF3) functional species, delivered open-circuit voltage peaks up to 110 V and a maximum power density of ∼4 mW/cm2 under rainwater droplets, while retaining over 85 % of its initial output after more than 17,000 droplet impacts. As a proof of concept, using the same CFx layer for both encapsulation and triboelectric functionality, the hybrid PSC/D-TENG device achieved short-circuit current densities of 11.6 mA/cm2 under 0.5 sun illumination and peak voltages of 12 V per raindrop, enabling simultaneous solar and rain energy harvesting. A self-charging prototype powered LED arrays via a custom boost converter, demonstrating practical multisource energy harvesting for low-power electronics., The authors thank the projects PID2022–143120OB-I00, PCI2024–153451 and TED2021–130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe", Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia. We also thank the Consejería de Universidad, Investigación e Innovación of Junta de Andalucía through project DGP_PIDI_2024_02239. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). XGC acknowledges the FPU program under the grant number FPU19/01864. FNG and CLS acknowledges the “VII Plan Propio de Investigación y Transferencia” of the Universidad de Sevilla. The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Fig 1a; Fig 1b; Fig 1e; Fig 2b; Fig 2c; Fig 2d; Fig 2e; Fig 3a; Fig 3b; Fig 3c; Fig 3d; Fig 3f; Fig 4a; Fig 4b; Fig 4c Fig 5a; Fig 5b; Fig 5c; Fig 5d; Fig 5e; Fig 5f; Fig 5g; Fig 5h; Fig 6e; Fig 7a; Fig 7d; Fig 7e; Fig 7f, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Acoustic Wave-Powered Durable Icephobic Duplex Coating Design with Superior Deicing Performance

  • Moral, Jaime del
  • Haworth, Luke
  • Montes, Laura
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
  • Rico, Víctor J.
  • Czermak, Triana
  • Carreño, Francisco
  • García-Gallego, Paloma
  • Mora, Julio
  • López-Santos, Carmen
  • Winkler, Andreas
  • Borrás, Ana
  • González-Elipe, Agustín R.
  • Fu, Yongqing
Piezoelectric thin film-based surface acoustic wave (SAW) deicing technology has recently emerged as an attractive and energy-efficient alternative with direct applications across multiple industrial sectors. However, the generation of SAWs on piezoelectric thin films, such as ZnO, faces diverse challenges, including its low long-term stability and variable wetting properties upon exposure to UV radiation and other environmental hazards. To overcome these challenges, we propose a bilayer coating design that integrates a diamond-like carbon (DLC) thin film with an atop CFx layer (DLC-CFx). This design is intended to serve as both an anti-icing and a protective coating for ZnO SAW devices built on aluminum substrates, which are specifically selected for critical ice-exposed applications in the aeronautics or wind turbine industries. We demonstrate that, unlike the implementation of single fluorinated polymer layers, such as commercial CYTOP, the DLC-CFx hydrophobic duplex coating effectively protects the ZnO surfaces while maintaining optimal SAW transmission and wave propagation and reducing the fluorine content. The SAW-induced deicing on these devices is achieved through a highly effective mechanism involving the interfacial ice melting, followed by a rapid ice sliding detachment for both small ice droplets and large ice aggregates. Experiments at laboratory scale and in an icing wind tunnel facility reveal that deicing involves SAW activation of the interface between the ice and the DLC-CFx bilayer, as well as an effective thermal contribution resulting from the rapid heat transmission through the aluminum substrate. Our studies demonstrate that the highly conformal deposition of DLC-CFx through a room temperature plasma-assisted method ensures reliability and long-term stability of thin-film-based acoustic wave devices in harsh outdoor conditions., The authors thank the ICMS services Surface Analysis and Surface Wettability Determination and the projects PID2022-143120OB-I00 and TED2021-130916B-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER)”, A way of making Europe, Fondos NextGeneration EU, and Plan de Recuperación, Transformación y Resiliencia. This research work is funded by the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 – SOUNDofICE) and CSIC Intramural projects, 202460E235 and 202160E002. The work is also funded by the EPSRC Centre for Doctoral Training in Renewable Energy Northeast Universities (ReNU) (Grant No. EP/S023836/1)., Peer reviewed