Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Semiconducting covalent organic frameworks based on spin‐delocalized trioxotriangulene neutral radicals

  • Escamilla, Paula
  • Trigo Pérez, Sara
  • Ramos Amigo, Rafael Enrique
  • Ortiz Cano, Ricardo
  • Vilas Varela, Manuel
  • Peña Gil, Diego
  • Melle Franco, Manuel
  • Rivadulla Fernández, José Francisco
  • Souto Salom, Manuel
Electrically conductive two-dimensional covalent organic frameworks (2D COFs) have emerged as a versatile class of crystalline porous polymers with promising applications in electronics and energy storage. However, high electrical conductivity generally relies on post-synthetic doping to generate charge carriers, which can compromise crystallinity, porosity, and structural homogeneity. Persistent neutral radical conductors provide an attractive alternative, as their unpaired electrons can generate free charge carriers without the need for counterions. Nevertheless, the incorporation of highly spin-delocalized π-radicals into COFs remains largely unexplored. Herein, we report the design and synthesis of imine-linked 2D COFs incorporating spin-delocalized trioxotriangulene (TOT) neutral radicals through complementary synthetic approaches. Direct use of a TOT radical derivative bearing amino groups affords a highly crystalline framework (TOT-COF-H) that exhibits semiconducting behavior (σRT = 1.2 × 10−4 S cm−1), a reduced band gap (Eg = 1.09 eV), and a low activation energy (0.24 eV). This work demonstrates a viable strategy for integrating spin-delocalized neutral radical building blocks into COFs, enabling the development of intrinsically conductive, porous, and crystalline organic frameworks without the need for extrinsic doping
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unraveling the ferroelectric switching mechanisms in ferroelectric pure and La doped HfO2 epitaxial thin films

  • Silva, Alexandre
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Silva, José P. B.
  • Marques, Luís
  • Lenzi, Veniero
Epitaxial orthorhombic phase La doped HfO2 films are promising for achieving robust ferroelectric polarization without wake-up effect. However, lowering the coercive field is crucial for achieving low-power memory devices. In this work, we have investigated the influence of the La content effect on the structural and ferroelectric properties of epitaxial HfO2 thin films. We show that while the remanent polarization is optimum for 2-5 at. % La-doped HfO2 films, the coercive field is decreased with La doping. The experimental work is supported by density functional theory (DFT) calculations which show that the polarization switching in epitaxial La:HfO2 films can be understood based on the synergetic contribution of the presence of a non-ferroelectric monoclinic phase and the La doping itself that causes a reduction of the nucleation and DW motion energy barriers for the crossing path, which makes it more probable than the non-crossing one., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), PID2020-112548RB-I00 and PID2019-107727RB-I00 projects, and from Generalitat de Catalunya (2021 SGR 00804) is acknowledged. We also acknowledge project TED2021-130453B-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR. This work was supported by: (i) the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding Contract UIDB/04650/2020; (ii) exploratory project 2022.01740.PDTC and (iii) the European Union's Horizon 2020 research and innovation programme under grant agreement No 958174 (M-ERA-NET3/0003/2021 - NanOx4EStor). J. P. B. S. also thanks FCT for the contract under the Institutional Call to Scientific Employment Stimulus – 2021 Call (CEECINST/00018/2021). A.S. also acknowledges FCT for the PhD grant with reference 2022.13796.BD., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

DNA-based nanocarriers to sequester altered microRNAs in cardiac dysfunction

  • Postigo, Alejandro
  • Hernández-Bellido, Natalia
  • Sánchez-Barat, Marcos
  • García-Mendívil, Laura
  • Pueyo, Esther
  • Barrio, Jesús del
  • Hernández-Ainsa, Silvia
  • Ordovás, Laura
MicroRNAs (miRs) play a critical role in modulating gene expression across biological processes, including cardiac aging and disease. As such, miRs have demonstrated therapeutic potential in several cardiac conditions. Efficient delivery of miR therapies to cardiac tissue is crucial for effective gene therapy and DNA-based nanocarriers (DNCs), based on Watson-Crick-Franklin highly specific base-pair recognition, have emerged as a promising, biocompatible alternative to viral-based methods. Here, DNCs designed to modulate miR levels as a potential treatment for cardiac dysfunction are presented. Specifically, the DNCs target miR-24-2, which inhibits SERCA2 gene. In humans, the reduction of SERCA2 activity is a hallmark of heart failure and is altered in cardiac aging. The assembled DNCs bearing anti-miR-24-2-5p sequences effectively restore intracellular levels of SERCA2 in a HEK293 cell model. The DNCs proper assembly is thoroughly verified, while their stability and miR-capture ability are demonstrated in vitro. The DNCs exhibit successful internalization into HEK293 and modest uptake into human cardiomyocytes. SERCA2 restoration by DNCs is significantly influenced by the miR-capture sequence layout, underscoring the importance of precise design for optimal biological outcomes. This study highlights the potential of DNCs in cardiac therapies, a previously unexplored avenue for addressing cardiac dysfunction., Authors acknowledge the following funding: grant LMP128_21 by Gobierno de Aragón, grant PID2020-113003GB-I00 funded by MICIU/AEI/10.13039/501100011033, PID2022-139859OB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF, UE and Research Group grants (E47_23R and T39_23R) by Gobierno de Aragón. This study was also supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1). Authors also acknowledge DNABEATS project, Joint Transnational Call 2022 of M-ERA.NET 3, (Horizon 2020 grant agreement No 958174) and supported by grants PCI2023-143390 and PCI2023-143438 funded by MICIU/AEI/10.13039/501100011033 and cofounded by EU. N.H.-B. and M.S.-B. were funded by Gobierno de Aragón fellowships CPB_09_20 and CPB_14_22, respectively. The authors would like to acknowledge the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza) and Servicios Científico-Técnicos (microscopía, UNATI, y citometría) of CIBA (IISA-IACS-Universidad de Zaragoza) for their support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Triboelectric pixels as building blocks for microscale and large-area integration of drop energy harvesters

  • Ghaffarinejad, Ali
  • García-Casas, Xabier
  • Núñez-Gálvez, Fernando
  • Budagosky, Jorge
  • Godinho, Vanda
  • López-Santos, Carmen
  • Sánchez-Valencia, Juan Ramón
  • Barranco, Ángel
  • Borrás, Ana
The dataset of this article has been deposited at digital.csic under the DOI https://doi.org/10.20350/digitalCSIC/16536 and is publicly available as of the publication date. All original code for the NanoDataLyzer has been deposited at Zenodo under the DOI https://doi.org/10.5281/ZENODO.13225385. Any additional information required to reanalyze the data reported in this paper is available from the lead contact upon request, Triboelectric nanogenerators (TENGs) are the most promising technology for harvesting energy from low-frequency liquid flows and impacts such as rain droplets. However, current drop energy harvester technologies suffer from low output power due to limitations in triboelectric materials, suboptimal device designs, and the inability to fully capture the kinetic energy of falling drops. This article introduces a microscale TENG capable of efficiently converting drop impact energy into electrical power in a single, rapid step. The device features a capacitive structure that enhances energy conversion through instantaneous capacitance changes when the drops contact the submillimetric top electrodes. This compact design establishes a path toward the development of dense arrays and rain panels and is adaptable to various liquids, scales, triboelectric surfaces, and thin-film configurations, including flexible and transparent materials., The authors thank the projects PID2022-143120OB-I00, PCI2024-153451, and TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia.” C.L.-S. thanks the University of Seville through the VI PPIT-US and “Ramón y Cajal” program funded by MCIN/AEI/10.13039/501100011033. J.R.S.-V. acknowledges project ANGSTROM selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement no. 958174). X.G.-C. acknowledges the FPU program under grant number FPU19/01864. FNG acknowledges the “VII Plan Propio de Investigación y Transferencia” of the Universidad de Sevilla. The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Facile integration of single-crystalline phthalocyanine nanowires and nanotrees as photo-enhanced conductometric sensors

  • Filippin, A Nicolás
  • Campos-Lendinez, Ángel
  • Delgado-Alvarez, Juan
  • Moreno-Martinez, Gloria
  • Castillo-Seoane, Javier
  • Rico, Víctor J.
  • Godinho, Vanda
  • Barranco, Ángel
  • Sanchez-Valencia, Juan R
  • Borrás, Ana
Chemicals and CAS Registry Numbers oxygen 7782-44-7 phthalocyanine 574-93-6, This article is part of the themed collection: Synthesis, physical properties and applications of advanced nanocrystalline materials, This article presents a reproducible and affordable methodology for fabricating organic nanowires (ONWs) and nanotrees (ONTs) as light-enhanced conductometric O2 sensors. This protocol is based on a solventless procedure for the formation of high-density arrays of nanowires and nanotrees on interdigitated electrodes. The synthesis combines physical vapour deposition for the self-assembled growth of free-phthalocyanine nanowires and soft plasma etching to prompt the nucleation sites on the as-grown ONWs to allow for the formation of nanotrees. Electrical conductivity in such low-dimensional electrodes was analysed in the context of density, length, and interconnection between nanowires and nanotrees. Furthermore, the electrodes were immersed in water to improve the nanowires' connectivity. The response of the nanotrees as conductometric O2 sensors was tested at different temperatures (from room temperature to 100 °C), demonstrating that the higher surface area exposed by the nanotrees, in comparison with that of their polycrystalline thin film counterparts, effectively enhances the doping effect of oxygen and increases the response of the ONT-based sensor. Both organic nanowires and nanotrees were used as model systems to study the augmented response of the sensors provided by illumination with white or monochromatic light to organic semiconducting systems. Interestingly, the otherwise negligible sensor response at room temperature can be activated (On/Off) under LED illumination, and no dependency on the illumination wavelength in the visible range was observed. Thus, under low-power LED illumination with white light, we show a response to O2 of 16% and 37% in resistivity for organic nanotrees at room temperature and 100 °C, respectively. These results open the path to developing room temperature long-lasting gas sensors based on one- and three-dimensional single-crystalline small-molecule nanowires., The authors thank the projects PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451 funded by MCIN/AEI/10.13039/501100011033 and “ERDF (FEDER)” A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of about 49 funding organisations (Horizon 2020 grant agreement No 958174). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced upstream processing of rice straw by an integrated alkaline pretreatment and enzymatic saccharification

  • Álvarez-González, Celia
  • Delgado Romero, José A.
  • González Grau, Juan Miguel
  • Zurita-Gotor, Pablo
  • Ladero, Miguel
  • Bolivar, Juan M.
12 páginas.- 7 figuras.- 3 tablas.- 85 referencias.- Supplementary material associated with this article can be found, in the online version, at doi:10.1016/j.rineng.2025.106573, The efficient conversion of lignocellulosic biomass into platform chemicals through enzymatic hydrolysis is often hindered by biomass recalcitrance and limited enzyme accessibility to cellulose. While several studies have addressed individual aspects of rice straw valorization, such as pretreatment, enzymatic hydrolysis, or hydrolysate fermentation, there remains a need for comprehensive research that systematically links pretreatment efficiency, enzyme economy, rapid process kinetics, and mechanistic understanding. Here, we present a systematic, integrated study combining mild NaOH pretreatment of rice straw (1 % NaOH, 73 °C, 4.5 h) with a deliberate pursuing of minimal enzyme dosage, achieving rapid and highly efficient saccharification. Key process variables, pretreatment conditions, enzyme dosage, and processing time, were thoroughly investigated to identify a suitable operation window that balances mild pretreatment with low enzyme input (as low as 6.5 mg protein/g solid, ∼4.4 FPU/g), enabling up to 90 % glucose yield within just 8 h—using 50–80 % less enzyme and a much shorter processing time than those commonly reported. Importantly, the study also addresses black liquor reuse, demonstrating pretreatment scale-up and translation to increased solid concentrations (7.5 % w/w DS –dry solid-). Comprehensive kinetic, compositional, and structural analyses—including XRD, SEM, confocal fluorescence microscopy, and enzyme adsorption assays—were integrated to provide new insights into the relationship between substrate modification, enzyme accessibility, and saccharification efficiency. © 2025 The Author(s), The main funding of this work comes from the BOJA project PY20 RE021 LOYOLA. JMB also acknowledges funding project CNS2022–135541 financed by MICIU/AEI /10.13039/501100011033 and by European Union NextGeneration EU/PRTR. This work has also received funding from the European Union Horizon 2020 Research and Innovation Program under grant agreement No 958174, in particular by the Spanish “Agencia Estatal de Investigación” through a national subproject within the M.ERA-Net Call 2021, project 9147 “BioMAT4EYE”: PCI2022-132971 to MLG. MLG also acknowledges funding through project PID2020-114365RB-C21 granted by MICIU/AEI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unlocking the hybrid piezo and pyroelectric nanogenerators performance by SiO2 nanowires confinement in poly(vinylidene fluoride)

  • Delgado-Álvarez, Juan
  • Krishna- Mishra, Hari
  • Aparicio, Francisco J.
  • García-Casas, Xabier
  • Barranco, Ángel
  • Sánchez-Valencia, J. R.
  • López-Flores, Víctor
  • Borrás, Ana
We report on the development of a novel flexible piezo/pyro-electric nanogenerator (PPNG) that combines a uniform film of poly(vinylidene fluoride) (PVDF) infiltrated into vertically supported SiO2 nanowires (NWs) to enhance both piezoelectric and pyroelectric energy harvesting capabilities. The synthetic procedure involves a low-temperature, multi-step approach, including the soft-template formation of SiO2 NWs on a flexible substrate, followed by the infiltration of a PVDF thin film (TF). The plasma-enabled fabrication of SiO2 NWs facilitated vertical alignment and precise control over the surface microstructure, density, and thickness of the confined nanostructures. These strategic structural systems promote the development of the most favorable electroactive β- and γ-phases in the PVDF matrix. Notably, electrical poling plays a major role in aligning the random dipoles of the PVDF macromolecular chain in a more ordered fashion to nucleate the amplified electroactive phases. The electrostatic interaction between PVDF and SiO2 NWs, which helps to facilitate the electroactive phase, is confirmed by the surface potential distribution. As a proof-of-concept, the fabricated PPNG exhibited a significant improvement in the instantaneous piezoelectric output power density (P), with a ∼9-fold amplification relative to its bare PVDF TF counterpart. In addition, PPNG has demonstrated excellent stability and durability. Analogously, the pyroelectric coefficient (p) demonstrated a 4-fold superior performance compared to the reference PVDF TF-based PPNG. Thus, the engineered system of SiO2 NWs@PVDF comprising PPNG offers a promising pathway toward multisource energy harvesting capabilities through efficient energy transduction at mechanical excitation frequencies of 10–12 Hz and across a temperature difference of 9–22 K., The authors thank Project Nos. PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe,” Fondos NextGenerationEU and “Plan de Recuperación, Transformación y Resiliencia.” Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of about 49 funding organizations (Horizon 2020 Grant Agreement No. 958174). The project leading to this article has received funding from the EU H2020 program under Grant Agreement No. 851929 (ERC Starting Grant 3DScavengers). V.L.F. acknowledges the support of the VI Plan Propio de Investigación y Transferencia (VI PPIT) of the University of Seville., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced Luminous Transmission and Solar Modulation in Thermochromic VO2 Aerogel-like Films via Remote Plasma Deposition

  • Obrero-Pérez, José M.
  • Moreno, Gloria P.
  • Rojas, T. Cristina
  • Ferrer-Fernández, Francisco J.
  • Moscoso, Francisco G.
  • Contreras-Bernal, Lidia
  • Castillo-Seoane, Javier
  • Núñez-Gálvez, Fernando
  • Aparicio, Francisco J.
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
Material suplementario en disponible en: https://doi.org/10.1021/acsami.5c07264, Vanadium dioxide (VO2) is a thermochromic material that undergoes a phase transition from a monoclinic semiconducting state to a rutile metallic state at 68 °C, a temperature close to room temperature. This property makes VO2 particularly valuable in applications such as optical and electrical switches, data storage, neuromorphic computing, and remarkably dynamic smart windows for solar radiation control. VO2 typically needs to be synthesized for these applications as nanostructured thin films. Over the past few decades, significant efforts have been made to control the thermochromic properties of VO2 through crystal structure tuning, doping, and the development of VO2 nanocomposites. Additionally, introducing nano- and mesoporosity has been shown to enhance the optical properties of thermochromic VO2 films. This study presents a methodology for producing highly porous, aerogel-like V2O5 films, which can be thermally processed to form aerogel-like VO2 films. This process is based on sequential plasma polymerization and plasma etching to produce aerogel-like V2O5 films that are annealed to yield ultraporous nanocrystalline VO2 films. The sacrificial vanadium-containing plasma polymers are obtained by remote plasma-assisted vacuum deposition (RPAVD) using vanadyl porphyrin as a precursor and Ar as plasma gas. Additional reference compact films VO2 films are obtained by a direct RPAVD process using the same precursor and oxygen plasmas in combination with thermal annealing. The aerogel-like VO2 films show exceptional thermochromic performance with luminous transmittances higher than 54%, solar modulation up to 18.8%, and IR modulation up to 35.5%. The presented plasma methodology is versatile, allowing both the synthesis of VO2 plasmonic structures to enhance the thermochromic response and the encapsulation of films to improve their stability in air dramatically. Additionally, this solvent-free synthetic method is fully compatible with doping procedures, scalable, and holds great potential for designing and optimizing smart window coatings., We thank the projects PID2022-143120OB-I00, TED2021-130916B–I00, PCI2024-153451, and PID2021-123879OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) a way of making Europe, the Fondos Nextgeneration EU, and Plan de Recuperación, Transformación y Resiliencia”. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). We also thank the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020 through projects P18-RT-3480) and CSIC (ref 202360086). The project leading to this article has also received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Boosting perovskite solar cell stability: Dual protection with ultrathin plasma polymer passivation layers

  • Nabil, Mahmoud
  • Contreras-Bernal, Lidia
  • Moreno-Martinez, Gloria
  • Obrero-Pérez, José M.
  • Castillo-Seoane, Javier
  • Anta, Juan A.
  • Oskam, Gerko
  • Pistor, Paul
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
Metal halide perovskite solar cells (MHPSCs) hold great promise due to their high efficiency and low fabrication costs, but their long-term stability under environmental conditions remains the main challenge. However, their long-term operational stability under environmental stress remains a critical limitation for commercialization. In this work, we explore a dual passivation strategy using ultrathin adamantane-based plasma polymer (ADA) films, deposited via remote plasma-assisted vacuum deposition (RPAVD), to enhance the environmental stability of MHPSCs. The ADA layers are introduced simultaneously at both the electron transport layer (ETL)/perovskite and perovskite/hole transport layer (HTL) interfaces, offering a conformal, transparent, and thermally stable coating compatible with delicate perovskite films. This approach enables interfacial defect passivation and acts as a protective barrier against moisture and UV-induced degradation. Devices incorporating ADA layers exhibit significantly improved stability under harsh conditions, retaining 80 % of their initial efficiency after 4000 min over extended exposure to humidity and continuous illumination. These results demonstrate the potential of multifunctional plasma-polymer coatings for the scalable and robust fabrication of perovskite solar cells with enhanced durability., We thank the projects PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) a way of making Europe, the Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”. Project ANGSTROM was selected in the Joint Transnational Call 2023 of ERA.NET" title="http://M-ERA.NET>M-ERA.NET 3, which is an EU-funded network of about 49 funding organisations (Horizon 2020 grant agreement No 958174). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers). M.N, G. O and J.A.A. acknowledge the Ministerio de Ciencia e Innovación of Spain, Agencia Estatal de Investigación (AEI), EU (FEDER) under grants PID2022-140061OB-I00 (DEEPMATSOLAR) and CNS2022-135694 (IMPRESOL) and partial funding through the European Union's Horizon Europe research innovation program under the Platform-Zero project (grant agreement number: 101058459)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Oxidation of Amorphous Porous VOx at Low Temperatures for the Formation of Thermochromic VO2 Films

  • Acosta-Rivera, Hiedra
  • Rico, Víctor J.
  • Ferrer, F. J.
  • Rojas, Teresa Cristina
  • Álvarez, Rafael
  • Martin, Nicolas
  • González-Elipe, Agustín R.
  • Palmero, Alberto
This article belongs to the Special Issue Advances and Innovations in Glancing Angle Deposition and Related Nanostructures., Thermochromic VO2 crystalline domains have been formed in amorphous nanocolumnar VOx films by means of a low-temperature oxidation process. The oxidation of an amorphous film with [O]/[V] below 1.9 favors the formation of VO2, V3O7, and V2O5 crystalline domains in the material for temperatures as low as 260 °C, while values above 1.9 lead to the sole formation of the V2O5 phase. It is found that the absorption of oxygen also causes a relevant film volume expansion that makes pores shrink. Under some specific conditions, low-temperature oxidation causes the near disappearance of the amorphous regions, clearly improving the overall transparency and optimizing the optical and electrical modulation capabilities associated with the presence of crystalline VO2 domains. The best thermochromic performance was found when the original stoichiometry was [O]/[V] = 1.5 and the oxidation temperature was 280 °C. These conditions yield a relatively transparent coating in the visible range that presents an optical modulation in the near-infrared range of nearly 50% and a drop of electrical resistivity of more than two orders of magnitude, with a transition temperature of 50.3 °C. A tentative model based on the volume expansion experienced by the film upon oxidation is proposed, which links the structural/chemical features of the material and the formation of the crystalline domains at such relatively low temperatures., We, the authors, thank the projects PID2020-112620GB-I00, PID2021-123879OB-C21, PID2022-143120OB-I00, and PCI2024-153451, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe”, Fondos NextGeneration EU, and “Plan de Recuperación, Transformación y Resiliencia”, as well as the intramural project 202560E034, funded by the Spanish National Council of Research. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). This research work is funded by the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020–SOUNDofICE). The project leading to this article received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Water-resistant hybrid perovskite solar cell -- drop triboelectric energy harvester

  • Núñez-Gálvez, Fernando
  • García-Casas, Xabier
  • Contreras-Bernal, Lidia
  • Descalzo, Alejandro
  • Obrero-Pérez, José M.
  • Castillo-Seoane, Javier
  • Ginés, Antonio J.
  • Leger, Gildas
  • Sánchez-López, J.C.
  • Espinós, J.P.
  • Barranco, Ángel
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • López-Santos, Carmen
Hybrid energy-harvesting systems combining perovskite solar cells (PSCs) with drop-driven triboelectric nanogenerators (D-TENGs) provide continuous power under various weather conditions. However, halide perovskites' vulnerability to moisture hampers widespread use. We present plasma-deposited fluorinated polymers (CFX) as multifunctional encapsulation layers offering water resistance, triboelectric functionality, and > 90 % optical transparency. These conformal, room-temperature, solvent-free coatings protect PSCs without reducing performance; encapsulated cells maintained a PCE of 17.9 %, and devices kept over 50 % of initial PCE after 10 days in high humidity and temperature. CFx layers also enabled compatibility with UV-curable resins, creating a hybrid PSC/D-TENG capable of harvesting solar and rain energy. This device retained 80 % of its performance after 300 hours of humid operation and stayed stable under continuous dripping and illumination for over 5 hours. Optimizing CFx's chemical composition improved triboelectric performance. Using the same CFx layer for encapsulation and triboelectric function, the device achieved 11.6 mA/cm2 short-circuit current under 0.5 sun and 12 V peak voltage per raindrop, enabling simultaneous solar and rain energy harvesting. A self-charging prototype powered LED arrays via a boost converter, demonstrating practical multisource energy harvesting., The authors thank the projects PID2022–143120OB-I00, PCI2024–153451 and TED2021–130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe", Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia. We also thank the Consejería de Universidad, Investigación e Innovación of Junta de Andalucía through project DGP_PIDI_2024_02239. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). XGC acknowledges the FPU program under the grant number FPU19/01864. FNG and CLS acknowledges the “VII Plan Propio de Investigación y Transferencia” of the Universidad de Sevilla. The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Water-resistant hybrid perovskite solar cell -- drop triboelectric energy harvester [Dataset]

  • Núñez-Gálvez, Fernando
  • García-Casas, Xabier
  • Contreras-Bernal, Lidia
  • Descalzo, Alejandro
  • Obrero-Pérez, José M.
  • Castillo-Seoane, Javier
  • Ginés, Antonio J.
  • Leger, Gildas
  • Sánchez-López, J.C.
  • Espinós, J.P.
  • Barranco, Ángel
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • López-Santos, Carmen
Hybrid energy-harvesting systems that combine perovskite solar cells (PSCs) with drop-driven triboelectric nanogenerators (D-TENGs) offer a compelling solution for continuous power generation under diverse weather conditions. Yet, the inherent vulnerability of halide perovskites to moisture and environmental stressors remains a critical barrier to their widespread deployment. To overcome this bottleneck, we introduce plasma-deposited fluorinated polymers (CFₓ) films as multifunctional encapsulation layers that simultaneously provide water resistance, triboelectric functionality, and optical transparency (>90 %). Plasma deposition enables conformal, room temperature, and solvent-free coating of complex surfaces, ensuring uniform protection without compromising photovoltaic performance. After encapsulation of PSCs with CFx films, power conversion efficiency remained virtually unchanged, and champion cells preserved a PCE of 17.9 %. More importantly, the devices exhibited high environmental stability, retaining over 50 % of their initial PCE for 10 days under high humidity and temperature. Furthermore, CFx layers enabled Spiro-OMeTAD compatibility with commercial UV-curable resins, leading to a thin-film hybrid PSC/D-TENG device capable of simultaneous solar and rain energy harvesting. This device maintained 80 % of its initial performance after 300 h of continuous illumination under humid conditions and demonstrated stability under continuous dripping and illumination for more than 5 h. We demonstrated that optimizing the chemical composition of CFx layers significantly enhances their triboelectric performance. In standalone operation, the optimized CFₓ-based D-TENG, enriched with 36.4 % of (CF2 + CF3) functional species, delivered open-circuit voltage peaks up to 110 V and a maximum power density of ∼4 mW/cm2 under rainwater droplets, while retaining over 85 % of its initial output after more than 17,000 droplet impacts. As a proof of concept, using the same CFx layer for both encapsulation and triboelectric functionality, the hybrid PSC/D-TENG device achieved short-circuit current densities of 11.6 mA/cm2 under 0.5 sun illumination and peak voltages of 12 V per raindrop, enabling simultaneous solar and rain energy harvesting. A self-charging prototype powered LED arrays via a custom boost converter, demonstrating practical multisource energy harvesting for low-power electronics., The authors thank the projects PID2022–143120OB-I00, PCI2024–153451 and TED2021–130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe", Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia. We also thank the Consejería de Universidad, Investigación e Innovación of Junta de Andalucía through project DGP_PIDI_2024_02239. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). XGC acknowledges the FPU program under the grant number FPU19/01864. FNG and CLS acknowledges the “VII Plan Propio de Investigación y Transferencia” of the Universidad de Sevilla. The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Fig 1a; Fig 1b; Fig 1e; Fig 2b; Fig 2c; Fig 2d; Fig 2e; Fig 3a; Fig 3b; Fig 3c; Fig 3d; Fig 3f; Fig 4a; Fig 4b; Fig 4c Fig 5a; Fig 5b; Fig 5c; Fig 5d; Fig 5e; Fig 5f; Fig 5g; Fig 5h; Fig 6e; Fig 7a; Fig 7d; Fig 7e; Fig 7f, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanotechnology-driven heart targeting to fulfil the potential of cardiac microRNA therapies

  • Hernández-Bellido, Natalia
  • Hernández-Ainsa, Silvia
  • Köhler, Ralf
  • Ordovás, Laura
MicroRNAs play a crucial role in regulating gene expression in most biological processes, including cardiac disease, regeneration and aging. They are therefore an attractive and novel therapeutic option, and extensive research in small animal models has demonstrated this potential in the heart. While the therapeutic outcomes obtained in large animal models are also promising, far fewer studies have been conducted in this species. Even fewer microRNA therapeutics have reached clinical trials, only CDR132L and MRG-110. This highlights a bottleneck in their development primarily associated with challenges in their in vivo delivery, specifically due to their limited stability and ability to penetrate the heart tissue., This review aims to describe the current state of development of cardiac microRNA therapies in relation to these challenges and to provide a comparative overview of the progress made in overcoming them. A special focus is set on the application of pharmaceutical nanotechnology and the development of targeted delivery strategies to the heart. These approaches have been tested primarily in small animal models and have shown to improve the cardiac penetration, accumulation and/or stability and of microRNAs and, therefore, their therapeutic efficacy compared to naked delivery. Notably, the latter is typically the method of choice in late preclinical research and early clinical trials. Consequently, targeted microRNA nanotherapies could be pivotal in overcoming the current bottleneck and realizing the therapeutic potential of microRNAs in the heart., In conclusion, this review offers an outlook of the future applicability of microRNA therapies leveraging the latest advances in non-viral targeted delivery with nanocarriers., LO acknowledges the support of grant PID2022-139859OB-I00 funded by MCIU/AEI/10.13039/501100011033 and ERDF, EU and grant PROY_B08_24 and BSICoS group T39_23R funded by Gobierno de Aragón. LO and SHA also acknowledge DNABEATS project, Joint Transnational Call 2022 of M-ERA.NET 3, (Horizon 2020 grant agreement No 958174) and supported by grants PCI2023-143390 and PCI2023-143438 funded by MICIU/AEI/10.13039/501100011033 and cofounded by EU. SHA acknowledges support by grant PID2023-147656OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, UE, and MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) promoted by the Government of Aragón. N.H-B was supported by the predoctoral (CPB_09_20) and mobility (MVB_03_23) fellowships funded by Gobierno de Aragón., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bottom-up formation of crystalline PEO/Na+scaffolds in NaPF6-Diglyme-PEO and the electrochemical properties of the resulting electrolytes

  • Campo, Ángela
  • García, Nuria
  • Hall, Aram
  • Younesi, Reza
  • Hosseinzadegan, Meghdad
  • Rehnlund Maibach, David
  • Tiemblo, Pilar
Ultrahigh Molecular Weight polyethylene oxide (UHMW PEO) and NaPF<inf>6</inf> diglyme produce solid electrolytes with chemical and electrochemical stability in Prussian White (PW)//Hard Carbon (HC) and Na//Al cells. Both the NaPF<inf>6</inf> concentration and the polymer content rule the rheology, and the mechanical and electrochemical properties of the electrolytes. The use of UHMW PEO allows to incorporate minimum concentrations with maximum rheological impact. The solid character is achieved by the formation of rigid scaffold consisting of PEO/Na+ crystalline complexes, which stops flow and provides a mechanical barrier between electrodes. To maximize the benefits of polymer addition, it is worthwhile to test formulations in which the concentration of Na+ and PEO are varied. This is because the PEO/Na+ crystalline complexes reduce the amount of mobile Na+ cations. Na+ complexation and crystalline phase distribution is studied by FTIR, XRD and DSC in NaPF<inf>6</inf> in diglyme solutions of concentration 0.9 to 1.5 m, and their solid electrolytes where PEO varies from 5 to 10 wt%. Ion mobility (conductivity and diffusivity) is studied in relation to their chemical composition and phase distribution, and their electrochemical behaviour is investigated in PW//HC and Na//Al cells. Cells with solid polymer electrolytes show remarkable performance even at room temperature and high current rate (1C)., The authors wish to acknowledge financial support from project SuSaNa under G.A. N 958174 (M-ERA.Net-3 Call2021), Spanish Research Agency (PCI2022-132931), and the Spanish Ministry of Science (PID2022-143310OB-I00) as well as the Swedish Energy Agency (P2021-90018) and the CSIC PIE projects 202360E035 and 202460E102. The NMR Service at ICTP-CSIC is acknowledged for the determination of diffusion coefficients., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanotechnology-driven heart targeting to fulfil the potential of cardiac microRNA therapies

  • Hernández-Bellido, Natalia
  • Hernández-Ainsa, Silvia
  • Köhler, Ralf
  • Ordovás, Laura
MicroRNAs play a crucial role in regulating gene expression in most biological processes, including cardiac disease, regeneration and aging. They are therefore an attractive and novel therapeutic option, and extensive research in small animal models has demonstrated this potential in the heart. While the therapeutic outcomes obtained in large animal models are also promising, far fewer studies have been conducted in this species. Even fewer microRNA therapeutics have reached clinical trials, only CDR132L and MRG-110. This highlights a bottleneck in their development primarily associated with challenges in their in vivo delivery, specifically due to their limited stability and ability to penetrate the heart tissue. This review aims to describe the current state of development of cardiac microRNA therapies in relation to these challenges and to provide a comparative overview of the progress made in overcoming them. A special focus is set on the application of pharmaceutical nanotechnology and the development of targeted delivery strategies to the heart. These approaches have been tested primarily in small animal models and have shown to improve the cardiac penetration, accumulation and/or stability and of microRNAs and, therefore, their therapeutic efficacy compared to naked delivery. Notably, the latter is typically the method of choice in late preclinical research and early clinical trials. Consequently, targeted microRNA nanotherapies could be pivotal in overcoming the current bottleneck and realizing the therapeutic potential of microRNAs in the heart. In conclusion, this review offers an outlook of the future applicability of microRNA therapies leveraging the latest advances in non-viral targeted delivery with nanocarriers.
Docta Complutense
Publication Artículo científico (JournalArticle)

Hereditary Optic Neuropathies: A Systematic Review on the Interplay between Biomaterials and Induced Pluripotent Stem Cells

  • Ladero Galán, Miguel
  • Reche Sainz, José Alberto
  • Galardo Pérez, María Esther
Hereditary optic neuropathies (HONs) such as dominant optic atrophy (DOA) and Leber Hereditary Optic Neuropathy (LHON) are mitochondrial diseases characterized by a degenerative loss of retinal ganglion cells (RGCs) and are a cause of blindness worldwide. To date, there are only limited disease-modifying treatments for these disorders. The discovery of induced pluripotent stem cell (iPSC) technology has opened several promising opportunities in the field of HON research and the search for therapeutic approaches. This systematic review is focused on the two most frequent HONs (LHON and DOA) and on the recent studies related to the application of human iPSC technology in combination with biomaterials technology for their potential use in the development of RGC replacement therapies with the final aim of the improvement or even the restoration of the vision of HON patients. To this purpose, the combination of natural and synthetic biomaterials modified with peptides, neurotrophic factors, and other low- to medium-molecular weight compounds, mimicking the ocular extracellular matrices, with human iPSC or iPSC-derived cell retinal progenitors holds enormous potential to be exploited in the near future for the generation of transplantable RGC populations.