Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One-reactor vacuum and plasma synthesis of transparent conducting oxide nanotubes and nanotrees: from single wire conductivity to ultra-broadband perfect absorbers in the NIR

  • Castillo-Seoane, Javier
  • Gil-Rostra, J.
  • Lozano, Gabriel
  • Ferrer, F. J.
  • Espinós, J.P.
  • Ostrikov, Kostya Ken
  • Yubero, Francisco
  • González-Elipe, Agustín R.
  • Barranco, Ángel
  • Sánchez-Valencia, J. R.
  • Borrás, Ana
The eventual exploitation of one-dimensional nanomaterials needs the development of scalable, high yield, homogeneous and environmentally friendly methods capable of meeting the requirements for fabrication of functional nanomaterials with properties on demand. In this article, we demonstrate a vacuum and plasma one-reactor approach for the synthesis of fundamental common elements in solar energy and optoelectronics, i.e. the transparent conducting electrode but in the form of nanotube and nanotree architectures. Although the process is generic and can be used for a variety of TCOs and wide-bandgap semiconductors, we focus herein on indium doped tin oxide (ITO) as the most previously researched in previous applications. This protocol combines widely applied deposition techniques such as thermal evaporation for the formation of organic nanowires serving as 1D and 3D soft templates, deposition of polycrystalline layers by magnetron sputtering, and removal of the templates by simply annealing under mild vacuum conditions. The process variables are tuned to control the stoichiometry, morphology, and alignment of the ITO nanotubes and nanotrees. Four-probe characterization reveals the improved lateral connectivity of the ITO nanotrees and applied on individual nanotubes shows resistivities as low as 3.5 ± 0.9 × 10–4 Ω cm, a value comparable to that of single-crystalline counterparts. The assessment of diffuse reflectance and transmittance in the UV-Vis range confirms the viability of the supported ITO nanotubes as random optical media working as strong scattering layers. Their further ability to form ITO nanotrees opens a path for practical applications as ultra-broadband absorbers in the NIR. The demonstrated low resistivity and optical properties of these ITO nanostructures open a way for their use in LEDs, IR shields, energy harvesting, nanosensors, and photoelectrochemical applications., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Plasma-Assisted Deposition of TiO2 3D Nanomembranes: Selective Wetting, Superomniphobicity, and Self-Cleaning

  • Montes, Laura
  • Román, José M.
  • García-Casas, Xabier
  • Castillo-Seoane, Javier
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
  • López-Santos, Carmen
  • Borrás, Ana
Fabrication of tunable wetting surfaces is sought for the last years given its importance on energy, biomaterials and antimicrobials, water purification, microfluidics, and smart surfaces. Liquid management on surfaces mainly depends on the control at the micro- and nanoscale of both roughness and chemical composition. Herein, the combination of a soft-template method and plasma-enhanced chemical vapor deposition is presented for the synthesis of TiO2 nanofibers on porous substrates such as cellulose and stainless-steel membranes. The protocol, carried out under mild conditions, produces 3D nanomembranes with superhydrophobicity and oleophilicity that are tested as microliter water/oil filters. Photoactivation of TiO2 by UV illumination provides a straightforward approach for wetting tunability that converts the surface into amphiphilic. A final chemical modification of the TiO2 nanofibers by embedding them in an elastomeric polymeric shell and by fluorine-based grafting opens the path toward the formation of superomniphobic and self-cleaning surfaces with long-lasting lifetimes. Thus, a reliable procedure is demonstrated for the fabrication of TiO2 nanofibers, which allows the modification of porous supports and provides an innovative route for the development of 3D nanomembranes with under design wetting. This protocol is extendable to alternative metal oxides, metals, and core@shell nanoarchitectures with potential multifunctionalities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Plasma engineering of microstructured piezo – Triboelectric hybrid nanogenerators for wide bandwidth vibration energy harvesting

  • García-Casas, Xabier
  • Ghaffarinehad, Ali
  • Aparicio, Francisco J.
  • Castillo-Seoane, Javier
  • López-Santos, Carmen
  • Espinós, J.P.
  • Cotrino, José
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
  • Borrás, Ana
We introduce herein the advanced application of low-pressure plasma procedures for the development of piezo and triboelectric mode I hybrid nanogenerators. Thus, plasma assisted deposition and functionalization methods are presented as key enabling technologies for the nanoscale design of ZnO polycrystalline shells, the formation of conducting metallic cores in core@shell nanowires, and for the solventless surface modification of polymeric coatings and matrixes. We show how the perfluorinated chains grafting of polydimethylsiloxane (PDMS) provides a reliable approach to increase the hydrophobicity and surface charges at the same time that keeping the PDMS mechanical properties. In this way, we produce efficient Ag/ZnO convoluted piezoelectric nanogenerators supported on flexible substrates and embedded in PDMS compatible with a contact–separation triboelectric architecture. Factors like crystalline texture, ZnO thickness, nanowires aspect ratio, and surface chemical modification of the PDMS are explored to optimize the power output of the nanogenerators aimed for harvesting from low-frequency vibrations. Just by manual triggering, the hybrid device can charge a capacitor to switch on an array of color LEDs. Outstandingly, this simple three-layer architecture allows for harvesting vibration energy in a wide bandwidth, thus, we show the performance characteristics for frequencies between 1 Hz and 50 Hz and demonstrate the successful activation of the system up to ca. 800 Hz., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advanced Cellulose–Nanocarbon Composite Films for High-Performance Triboelectric and Piezoelectric Nanogenerators

  • González, Jaime
  • Ghaffarinejad, Ali
  • Ivanov, Maxim
  • Ferreira, Paula
  • Vilarinho, Paula M.
  • Borrás, Ana
  • Amorín, Harvey
  • Wicklein, Bernd
Natural polymers such as cellulose have interesting tribo- and piezoelectric properties for paper-based energy harvesters, but their low performance in providing sufficient output power is still an impediment to a wider deployment for IoT and other low-power applications. In this study, different types of celluloses were combined with nanosized carbon fillers to investigate their effect on the enhancement of the electrical properties in the final nanogenerator devices. Cellulose pulp (CP), microcrystalline cellulose (MCC) and cellulose nanofibers (CNFs) were blended with carbon black (CB), carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs). The microstructure of the nanocomposite films was characterized by scanning electron and probe microscopies, and the electrical properties were measured macroscopically and at the local scale by piezoresponse force microscopy. The highest generated output voltage in triboelectric mode was obtained from MCC films with CNTs and CB, while the highest piezoelectric voltage was produced in CNF-CNT films. The obtained electrical responses were discussed in relation to the material properties. Analysis of the microscopic response shows that pulp has a higher local piezoelectric d33 coefficient (145 pC/N) than CNF (14 pC/N), while the macroscopic response is greatly influenced by the excitation mode and the effective orientation of the crystals relative to the mechanical stress. The increased electricity produced from cellulose nanocomposites may lead to more efficient and biodegradable nanogenerators., This research was supported through the grants PID2019-107022RJ-I00, RYC2021-034164-I and PID2021-122708OB-C33, funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”, is acknowledged. AB and AG thank the ERC StG 3Dscavengers (grant agreement number 851929). MI, PF, and PV thank project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020 and LA/P/0006/2020, financed by national funds through the FCT/MCTES (PIDDAC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synergistic Integration of Nanogenerators and Solar Cells: Advanced Hybrid Structures and Applications

  • Hajra, Sugato
  • Ali, Amanat
  • Panda, Swati
  • Song, Heewoon
  • Rajaitha, Peter Mary
  • Dubal, Deepak Prakash
  • Borrás, Ana
  • In-Na, Pichaya
  • Vittayakorn, Naratip
  • Vivekananthan, Venkateswaran
  • Kim, Hoe Joon
  • Divya, Sivasubramani
  • Oh, Tae Hwan
The rapid growth of global energy consumption and the increasing demand for sustainable and renewable energy sources have urged vast research into harnessing energy from various sources. Among them, the most promising approaches are nanogenerators (NGs) and solar cells (SCs), which independently offer innovative solutions for energy harvesting. This review paper presents a comprehensive analysis of the integration of NGs and SCs, exploring advanced hybrid structures and their diverse applications. First, an overview of the principles and working mechanisms of NGs and SCs is provided for seamless hybrid integrations. Then, various design strategies are discussed, such as piezoelectric and triboelectric NGs with different types of SCs. Finally, a wide range of applications are explored that benefit from the synergistic integration of NGs and SCs, including self-powered electronics, wearable devices, environmental monitoring, and wireless sensor networks. The potential for these hybrid systems is highlighted to address real-world energy needs and contribute to developing sustainable and self-sufficient technologies. In conclusion, this review provides valuable insights into the state-of-the-art developments in NGs and SCs integration, shedding light on advanced hybrid structures and their diverse applications., This work was supported by the National Research Foundation of Korea (2021R1C1C101158813) and the Ministry of Trade, Industry and Energy of Korea (RS-2023-00231350). P.I.-N. is funded by the Office of the Permanent Secretary in Thailand under the budget year of 2022 (Contract no. RGNS65-015). A.B. acknowledges the TED2021-130916BI00 funded by MCIN/AEI/10.13039/ 501100011033 and by “ERDF (FEDER) A way of making Europe, Fondos Nextgeneration EU and Plan de Recuperacion, Transformacion y Resiliencia,” and the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers). VV thanks the Department of Science and Technology, India for the support through the PURSE program (SR/PURSE/2023/196: TPN:88213) and the Royal Society of Chemistry for the researcher grant (R22-7381975972). S.D. and H.O. acknowledge the support of the Korea Basic Science Institute (National Research Facilities and Equipment Center) grant funded by the Ministry of Education (2019R1A6C1010046)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photoelectrochemical Water Splitting with ITO/WO3/BiVO4/CoPi Multishell Nanotubes Enabled by a Vacuum and Plasma Soft-Template Synthesis

  • Gil-Rostra, J.
  • Castillo-Seoane, Javier
  • Guo, Qian
  • Jorge Sobrido, Ana Belén
  • González-Elipe, Agustín R.
  • Borrás, Ana
A common approach for the photoelectrochemical (PEC) splitting of water relies on the application of WO3 porous electrodes sensitized with BiVO4 acting as a visible photoanode semiconductor. In this work, we propose a new architecture of photoelectrodes consisting of supported multishell nanotubes (NTs) fabricated by a soft-template approach. These NTs are formed by a concentric layered structure of indium tin oxide (ITO), WO3, and BiVO4, together with a final thin layer of cobalt phosphate (CoPi) co-catalyst. The photoelectrode manufacturing procedure is easily implementable at a large scale and successively combines the thermal evaporation of single crystalline organic nanowires (ONWs), the magnetron sputtering deposition of ITO and WO3, and the solution dripping and electrochemical deposition of, respectively, BiVO4 and CoPi, plus the annealing in air under mild conditions. The obtained NT electrodes depict a large electrochemically active surface and outperform the efficiency of equivalent planar-layered electrodes by more than one order of magnitude. A thorough electrochemical analysis of the electrodes illuminated with blue and solar lights demonstrates that the characteristics of the WO3/BiVO4 Schottky barrier heterojunction control the NT electrode efficiency, which depended on the BiVO4 outer layer thickness and the incorporation of the CoPi electrocatalyst. These results support the high potential of the proposed soft-template methodology for the large-area fabrication of highly efficient multishell ITO/WO3/BiVO4/CoPi NT electrodes for the PEC splitting of water., The authors thank the project PID2019-110430GB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe,” by the “European Union”. The authors also want to thank CSIC for its financial support through the Intramural Project 202260E110. The project leading to this article has received funding from the EU H2020 program under the grant agreement 851929 (ERC Starting Grant 3DScavengers). Authors thank the ICMSE services for Electron Microscopy, X-Ray Diffraction and Surface Analysis, and the Center for Bioinnovation (University of Malaga) for the access to FESEM-FIB., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset of Triboelectric Pixels as building blocks for microscale and large area integration of drop energy harvesters

  • García-Casas, Xabier
  • Nuñez-Galvez, Fernando
  • Budagosky, Jorge
  • Ghaffarinejad, Ali
  • Godinho, Vanda
  • López-Santos, Carmen
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
  • Borrás, Ana
[Description of methods used for collection/generation of data] Described in https://arxiv.org/abs/2405.02464 [Methods for processing the data] NanoDataLyzer., Measurements of Triboelectric Pixels output under different splashing and liquid conditions. Dropping height, liquid conductivity, electrode layout., Projects TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”, by the “European Union", the EU H2020 program under grant agreement 3DScavengers Starting Grant 851929., File List: 0.5m_mQ_instant 0.5m_mQ_integ 1.0m_mQ_instant 1.0m_mQ_integ 1.5m_mQ_instant 1.5m_mQ_integ 4_NaCl 4_Rain 4_mQ mQ_instant mQ_integ NH4Cl_instant NH4Cl_integ NaCl_instant NaCl_integ BottomOnly_instant BottomOnly_integ OneTop_instant OneTop_integ TwoTop_instant TwoTop_integ, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly Stable Photoluminescence in Vacuum-Processed Halide Perovskite Core–Shell 1D Nanostructures

  • Castillo-Seoane, Javier
  • Contreras-Bernal, Lidia
  • Rojas, T. Cristina
  • Espinós, J.P.
  • Castro-Méndez, Andrés Felipe
  • Correa-Baena, Juan Pablo.
  • Barranco, Ángel
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
Hybrid organometal halide perovskites (HP) present exceptional optoelectronic properties, but their poor long-term stability is a major bottleneck for their commercialization. Herein, a solvent-free approach to growing single-crystal organic nanowires (ONW) is presented, along with nanoporous metal oxide scaffolds and HP, to form a core@multishell architecture. The synthesis is carried out under mild vacuum conditions employing thermal evaporation for the metal-free phthalocyanine (H2Pc) nanowires, which are the core, plasma-enhanced chemical vapor deposition (PECVD) for the TiO2 shell, and co-evaporation of lead iodide (PbI2) and methylammonium iodide (CH3NH3I/MAI) for the CH3NH3PbI3 (MAPbI3/MAPI) perovskite shell. A detailed characterization of the nanostructures by electron microscopy, (S)-TEM, and X-ray diffraction, XRD, is presented, revealing a different crystallization of the HP depending on the template: while the growth on H2Pc nanowires induces the typical MAPI tetragonal structure, a low-dimensional phase (LDP) is observed on the 1D-TiO2 nanotubes. Such a combination yields an unprecedentedly stable photoluminescence emission over 20 h and over 300 h after encapsulation in polymethyl methacrylate (PMMA) under different atmospheres including N2, air, and high moisture levels. Moreover, the unique 1D morphology of the system, together with the high refractive index, allows for a strong waveguiding effect along the HP nanowire length., The authors thank the projects PID2022-143120OB-I00, PID2019-109603RA-I00, TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe, Fondos Nextgeneration EU and Plan de Recuperación, Transformación y Resiliencia”. The authors also want to thank CSIC for its financial support through the Intramural Project PIE 202260I156 and Interdisciplinary Thematic Platform (PTI) Transición Energética Sostenible (PTI-TRANSENER+). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers). The authors also thank the group of Prof. Heben at the University of Toledo (US) for their assistance in understanding the crystalline low-dimensional phase., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multidimensional nanoarchitectures for improved indoor light harvesting in dye-sensitized solar cells

  • Castillo-Seoane, Javier
  • Contreras-Bernal, Lidia
  • Riquelme, Antonio J.
  • Fauvel, Samuel
  • Kervella, Yann
  • Gil-Rostra, Jorge
  • Lozano, Gabriel
  • Barranco, Ángel
  • Demadrille, Renaud
  • Sánchez-Valencia, Juan R.
  • Borrás, Ana
Dye Sensitized Solar Cells (DSSCs) have recently gained renewed interest for their potential in indoor light harvesting and powering wireless devices. However, to fully exploit their potential, crucial aspects require further attention, in particular, the improvement of spectral compatibility and low-light harvesting mechanisms, as well as the development of efficient photoanodes through high-yield scalable methods. In this article, we propose the use of nanocomposite photoanodes integrating mesoporous TiO2 nanoparticles, ITO nanotubes (NT), and anatase TiO2 shells (ITO@TiO2 NT) prepared by step-by-step method relying on mild temperature conditions and avoiding toxic precursors. These photoanodes outperform previous attempts to implement low-dimensional ITO and ITO@TiO2 nanowires and nanotubes for outdoor light conversion, demonstrating a power conversion efficiency under low artificial light intensity of 24 % for at 0.014 mW cm−2, a 166 % increase compared to the conventional architectures. Advanced microstructural, optical, and electrochemical characterizations have revealed that the strong scattering effect of the light in the visible range coupled with enhanced charge collection at low-intensity illumination are the essential mechanisms responsible for such enhanced energy conversion. Remarkably, our devices retain up to 90 % of the normal incidence efficiency even under glancing illumination, while conventional reference devices retain only 30 %., We thank the projects PID2019-109603RA-I00, TED2021-130916B-I00, PID2019-110430 GB-C21, and PID2022-143120OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”. LCB acknowledges the French embassy in Spain for the grant “123892U” within framework of the proposal scientific call 2022 “Becas doctorales y postdoctorales”. Thanks to C.M.D Felipe II, particularly María Inmaculada Carmona Rivera, for providing some tools for preparing counter-electrodes. The authors also thank CSIC for its financial support through the Interdisciplinary Thematic Platform (PTI) Transición Energética Sostenible (PTI-TRANSENER+). R.D. acknowledges the European Research Council (ERC) for funding. This work was funded under the European Union's Horizon 2020 research and innovation programme (grant agreement number 832606; project PISCO). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Triboelectric pixels as building blocks for microscale and large-area integration of drop energy harvesters

  • Ghaffarinejad, Ali
  • García-Casas, Xabier
  • Núñez-Gálvez, Fernando
  • Budagosky, Jorge
  • Godinho, Vanda
  • López-Santos, Carmen
  • Sánchez-Valencia, Juan Ramón
  • Barranco, Ángel
  • Borrás, Ana
The dataset of this article has been deposited at digital.csic under the DOI https://doi.org/10.20350/digitalCSIC/16536 and is publicly available as of the publication date. All original code for the NanoDataLyzer has been deposited at Zenodo under the DOI https://doi.org/10.5281/ZENODO.13225385. Any additional information required to reanalyze the data reported in this paper is available from the lead contact upon request, Triboelectric nanogenerators (TENGs) are the most promising technology for harvesting energy from low-frequency liquid flows and impacts such as rain droplets. However, current drop energy harvester technologies suffer from low output power due to limitations in triboelectric materials, suboptimal device designs, and the inability to fully capture the kinetic energy of falling drops. This article introduces a microscale TENG capable of efficiently converting drop impact energy into electrical power in a single, rapid step. The device features a capacitive structure that enhances energy conversion through instantaneous capacitance changes when the drops contact the submillimetric top electrodes. This compact design establishes a path toward the development of dense arrays and rain panels and is adaptable to various liquids, scales, triboelectric surfaces, and thin-film configurations, including flexible and transparent materials., The authors thank the projects PID2022-143120OB-I00, PCI2024-153451, and TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia.” C.L.-S. thanks the University of Seville through the VI PPIT-US and “Ramón y Cajal” program funded by MCIN/AEI/10.13039/501100011033. J.R.S.-V. acknowledges project ANGSTROM selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement no. 958174). X.G.-C. acknowledges the FPU program under grant number FPU19/01864. FNG acknowledges the “VII Plan Propio de Investigación y Transferencia” of the Universidad de Sevilla. The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Facile integration of single-crystalline phthalocyanine nanowires and nanotrees as photo-enhanced conductometric sensors

  • Filippin, A Nicolás
  • Campos-Lendinez, Ángel
  • Delgado-Alvarez, Juan
  • Moreno-Martinez, Gloria
  • Castillo-Seoane, Javier
  • Rico, Víctor J.
  • Godinho, Vanda
  • Barranco, Ángel
  • Sanchez-Valencia, Juan R
  • Borrás, Ana
Chemicals and CAS Registry Numbers oxygen 7782-44-7 phthalocyanine 574-93-6, This article is part of the themed collection: Synthesis, physical properties and applications of advanced nanocrystalline materials, This article presents a reproducible and affordable methodology for fabricating organic nanowires (ONWs) and nanotrees (ONTs) as light-enhanced conductometric O2 sensors. This protocol is based on a solventless procedure for the formation of high-density arrays of nanowires and nanotrees on interdigitated electrodes. The synthesis combines physical vapour deposition for the self-assembled growth of free-phthalocyanine nanowires and soft plasma etching to prompt the nucleation sites on the as-grown ONWs to allow for the formation of nanotrees. Electrical conductivity in such low-dimensional electrodes was analysed in the context of density, length, and interconnection between nanowires and nanotrees. Furthermore, the electrodes were immersed in water to improve the nanowires' connectivity. The response of the nanotrees as conductometric O2 sensors was tested at different temperatures (from room temperature to 100 °C), demonstrating that the higher surface area exposed by the nanotrees, in comparison with that of their polycrystalline thin film counterparts, effectively enhances the doping effect of oxygen and increases the response of the ONT-based sensor. Both organic nanowires and nanotrees were used as model systems to study the augmented response of the sensors provided by illumination with white or monochromatic light to organic semiconducting systems. Interestingly, the otherwise negligible sensor response at room temperature can be activated (On/Off) under LED illumination, and no dependency on the illumination wavelength in the visible range was observed. Thus, under low-power LED illumination with white light, we show a response to O2 of 16% and 37% in resistivity for organic nanotrees at room temperature and 100 °C, respectively. These results open the path to developing room temperature long-lasting gas sensors based on one- and three-dimensional single-crystalline small-molecule nanowires., The authors thank the projects PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451 funded by MCIN/AEI/10.13039/501100011033 and “ERDF (FEDER)” A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of about 49 funding organisations (Horizon 2020 grant agreement No 958174). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unlocking the hybrid piezo and pyroelectric nanogenerators performance by SiO2 nanowires confinement in poly(vinylidene fluoride)

  • Delgado-Álvarez, Juan
  • Krishna- Mishra, Hari
  • Aparicio, Francisco J.
  • García-Casas, Xabier
  • Barranco, Ángel
  • Sánchez-Valencia, J. R.
  • López-Flores, Víctor
  • Borrás, Ana
We report on the development of a novel flexible piezo/pyro-electric nanogenerator (PPNG) that combines a uniform film of poly(vinylidene fluoride) (PVDF) infiltrated into vertically supported SiO2 nanowires (NWs) to enhance both piezoelectric and pyroelectric energy harvesting capabilities. The synthetic procedure involves a low-temperature, multi-step approach, including the soft-template formation of SiO2 NWs on a flexible substrate, followed by the infiltration of a PVDF thin film (TF). The plasma-enabled fabrication of SiO2 NWs facilitated vertical alignment and precise control over the surface microstructure, density, and thickness of the confined nanostructures. These strategic structural systems promote the development of the most favorable electroactive β- and γ-phases in the PVDF matrix. Notably, electrical poling plays a major role in aligning the random dipoles of the PVDF macromolecular chain in a more ordered fashion to nucleate the amplified electroactive phases. The electrostatic interaction between PVDF and SiO2 NWs, which helps to facilitate the electroactive phase, is confirmed by the surface potential distribution. As a proof-of-concept, the fabricated PPNG exhibited a significant improvement in the instantaneous piezoelectric output power density (P), with a ∼9-fold amplification relative to its bare PVDF TF counterpart. In addition, PPNG has demonstrated excellent stability and durability. Analogously, the pyroelectric coefficient (p) demonstrated a 4-fold superior performance compared to the reference PVDF TF-based PPNG. Thus, the engineered system of SiO2 NWs@PVDF comprising PPNG offers a promising pathway toward multisource energy harvesting capabilities through efficient energy transduction at mechanical excitation frequencies of 10–12 Hz and across a temperature difference of 9–22 K., The authors thank Project Nos. PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe,” Fondos NextGenerationEU and “Plan de Recuperación, Transformación y Resiliencia.” Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of about 49 funding organizations (Horizon 2020 Grant Agreement No. 958174). The project leading to this article has received funding from the EU H2020 program under Grant Agreement No. 851929 (ERC Starting Grant 3DScavengers). V.L.F. acknowledges the support of the VI Plan Propio de Investigación y Transferencia (VI PPIT) of the University of Seville., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced Luminous Transmission and Solar Modulation in Thermochromic VO2 Aerogel-like Films via Remote Plasma Deposition

  • Obrero-Pérez, José M.
  • Moreno, Gloria P.
  • Rojas, T. Cristina
  • Ferrer-Fernández, Francisco J.
  • Moscoso, Francisco G.
  • Contreras-Bernal, Lidia
  • Castillo-Seoane, Javier
  • Núñez-Gálvez, Fernando
  • Aparicio, Francisco J.
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
Material suplementario en disponible en: https://doi.org/10.1021/acsami.5c07264, Vanadium dioxide (VO2) is a thermochromic material that undergoes a phase transition from a monoclinic semiconducting state to a rutile metallic state at 68 °C, a temperature close to room temperature. This property makes VO2 particularly valuable in applications such as optical and electrical switches, data storage, neuromorphic computing, and remarkably dynamic smart windows for solar radiation control. VO2 typically needs to be synthesized for these applications as nanostructured thin films. Over the past few decades, significant efforts have been made to control the thermochromic properties of VO2 through crystal structure tuning, doping, and the development of VO2 nanocomposites. Additionally, introducing nano- and mesoporosity has been shown to enhance the optical properties of thermochromic VO2 films. This study presents a methodology for producing highly porous, aerogel-like V2O5 films, which can be thermally processed to form aerogel-like VO2 films. This process is based on sequential plasma polymerization and plasma etching to produce aerogel-like V2O5 films that are annealed to yield ultraporous nanocrystalline VO2 films. The sacrificial vanadium-containing plasma polymers are obtained by remote plasma-assisted vacuum deposition (RPAVD) using vanadyl porphyrin as a precursor and Ar as plasma gas. Additional reference compact films VO2 films are obtained by a direct RPAVD process using the same precursor and oxygen plasmas in combination with thermal annealing. The aerogel-like VO2 films show exceptional thermochromic performance with luminous transmittances higher than 54%, solar modulation up to 18.8%, and IR modulation up to 35.5%. The presented plasma methodology is versatile, allowing both the synthesis of VO2 plasmonic structures to enhance the thermochromic response and the encapsulation of films to improve their stability in air dramatically. Additionally, this solvent-free synthetic method is fully compatible with doping procedures, scalable, and holds great potential for designing and optimizing smart window coatings., We thank the projects PID2022-143120OB-I00, TED2021-130916B–I00, PCI2024-153451, and PID2021-123879OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) a way of making Europe, the Fondos Nextgeneration EU, and Plan de Recuperación, Transformación y Resiliencia”. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). We also thank the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020 through projects P18-RT-3480) and CSIC (ref 202360086). The project leading to this article has also received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Boosting perovskite solar cell stability: Dual protection with ultrathin plasma polymer passivation layers

  • Nabil, Mahmoud
  • Contreras-Bernal, Lidia
  • Moreno-Martinez, Gloria
  • Obrero-Pérez, José M.
  • Castillo-Seoane, Javier
  • Anta, Juan A.
  • Oskam, Gerko
  • Pistor, Paul
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
Metal halide perovskite solar cells (MHPSCs) hold great promise due to their high efficiency and low fabrication costs, but their long-term stability under environmental conditions remains the main challenge. However, their long-term operational stability under environmental stress remains a critical limitation for commercialization. In this work, we explore a dual passivation strategy using ultrathin adamantane-based plasma polymer (ADA) films, deposited via remote plasma-assisted vacuum deposition (RPAVD), to enhance the environmental stability of MHPSCs. The ADA layers are introduced simultaneously at both the electron transport layer (ETL)/perovskite and perovskite/hole transport layer (HTL) interfaces, offering a conformal, transparent, and thermally stable coating compatible with delicate perovskite films. This approach enables interfacial defect passivation and acts as a protective barrier against moisture and UV-induced degradation. Devices incorporating ADA layers exhibit significantly improved stability under harsh conditions, retaining 80 % of their initial efficiency after 4000 min over extended exposure to humidity and continuous illumination. These results demonstrate the potential of multifunctional plasma-polymer coatings for the scalable and robust fabrication of perovskite solar cells with enhanced durability., We thank the projects PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) a way of making Europe, the Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”. Project ANGSTROM was selected in the Joint Transnational Call 2023 of ERA.NET" title="http://M-ERA.NET>M-ERA.NET 3, which is an EU-funded network of about 49 funding organisations (Horizon 2020 grant agreement No 958174). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers). M.N, G. O and J.A.A. acknowledge the Ministerio de Ciencia e Innovación of Spain, Agencia Estatal de Investigación (AEI), EU (FEDER) under grants PID2022-140061OB-I00 (DEEPMATSOLAR) and CNS2022-135694 (IMPRESOL) and partial funding through the European Union's Horizon Europe research innovation program under the Platform-Zero project (grant agreement number: 101058459)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Oxidation of Amorphous Porous VOx at Low Temperatures for the Formation of Thermochromic VO2 Films

  • Acosta-Rivera, Hiedra
  • Rico, Víctor J.
  • Ferrer, F. J.
  • Rojas, Teresa Cristina
  • Álvarez, Rafael
  • Martin, Nicolas
  • González-Elipe, Agustín R.
  • Palmero, Alberto
This article belongs to the Special Issue Advances and Innovations in Glancing Angle Deposition and Related Nanostructures., Thermochromic VO2 crystalline domains have been formed in amorphous nanocolumnar VOx films by means of a low-temperature oxidation process. The oxidation of an amorphous film with [O]/[V] below 1.9 favors the formation of VO2, V3O7, and V2O5 crystalline domains in the material for temperatures as low as 260 °C, while values above 1.9 lead to the sole formation of the V2O5 phase. It is found that the absorption of oxygen also causes a relevant film volume expansion that makes pores shrink. Under some specific conditions, low-temperature oxidation causes the near disappearance of the amorphous regions, clearly improving the overall transparency and optimizing the optical and electrical modulation capabilities associated with the presence of crystalline VO2 domains. The best thermochromic performance was found when the original stoichiometry was [O]/[V] = 1.5 and the oxidation temperature was 280 °C. These conditions yield a relatively transparent coating in the visible range that presents an optical modulation in the near-infrared range of nearly 50% and a drop of electrical resistivity of more than two orders of magnitude, with a transition temperature of 50.3 °C. A tentative model based on the volume expansion experienced by the film upon oxidation is proposed, which links the structural/chemical features of the material and the formation of the crystalline domains at such relatively low temperatures., We, the authors, thank the projects PID2020-112620GB-I00, PID2021-123879OB-C21, PID2022-143120OB-I00, and PCI2024-153451, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe”, Fondos NextGeneration EU, and “Plan de Recuperación, Transformación y Resiliencia”, as well as the intramural project 202560E034, funded by the Spanish National Council of Research. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). This research work is funded by the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020–SOUNDofICE). The project leading to this article received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed