Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 119
Encontrada(s) 2 página(s)

Dipòsit Digital de Documents de la UAB
Publication Reseña (Review)

Targeting Viral Transcription for HIV Cure Strategies

  • Izquierdo-Pujol, Jon|||0000-0002-5903-9909
  • Puertas, Maria C.|||0000-0002-6750-2318
  • Martínez Picado, Francisco Javier|||0000-0002-4916-2129
  • Moron-Lopez, Sara|||0000-0003-0800-9205
Combination antiretroviral therapy (ART) suppresses viral replication to undetectable levels, reduces mortality and morbidity, and improves the quality of life of people living with HIV (PWH). However, ART cannot cure HIV infection because it is unable to eliminate latently infected cells. HIV latency may be regulated by different HIV transcription mechanisms, such as blocks to initiation, elongation, and post-transcriptional processes. Several latency-reversing (LRA) and -promoting agents (LPA) have been investigated in clinical trials aiming to eliminate or reduce the HIV reservoir. However, none of these trials has shown a conclusive impact on the HIV reservoir. Here, we review the cellular and viral factors that regulate HIV-1 transcription, the potential pharmacological targets and genetic and epigenetic editing techniques that have been or might be evaluated to disrupt HIV-1 latency, the role of miRNA in post-transcriptional regulation of HIV-1, and the differences between the mechanisms regulating HIV-1 and HIV-2 expression.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Versatile Organometallic Synthesis of 0D/2D Metal@Germanane Nanoarchitectonics for Electrochemical Energy Conversion Applications

  • Lei, Yiming|||0000-0002-3435-6924
  • Sala, Xavier|||0000-0002-7779-6313
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Muñoz, Jose|||0000-0001-9529-6980
Hydrogen-terminated 2D-Germanane (2D-GeH), a germanium-based 2D material akin to graphene, is receiving enormous attention owing to its predicted optoelectronic characteristics. However, experimental research of 2D-GeH is still in an early stage, and therefore its real implementation for task-specific applications will depend on the correct development of suitable chemical functionalization methods. Herein, a general and straightforward organometallic (OM) approach is provided for the robust functionalization of 2D-GeH with different 0D noble metal nanoparticles (M-NPs), resulting in 0D/2D M@GeH nanoarchitectonics. As a proof-of-principle, 0D/2D Pt@GeH and Au@GeH nanoarchitectonics have been successfully synthesized, characterized, and explored as unconventional electrocatalysts for boosting energy conversion reactions. While the hydrogen evolution reaction activity was evaluated for Pt@GeH, the oxygen reduction reaction was interrogated for Au@GeH. Interestingly, the implanted catalytic features of M-NPs yielded to 0D/2D M@GeH nanoarchitectonics with enhanced energy conversion activity comparing to pristine 2D-GeH counterpart. This work proves the suitability of 2D-GeH as unconventional substrates to stabilize nobleM-NPs, and the versatility of the OM approach for the custom design of a new family of 0D/2D M@GeH nanoarchitectonics to expand the implementation of monoelemental 2D materials as promising electrocatalysts in energy conversion field and beyond.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Multitasking carbohydrate-functionalized 2D germanane with implanted supramolecular stereodiscrimination ability

  • Lei, Yiming|||0000-0002-3435-6924
  • Campos-Lendínez, Ángel|||0000-0002-7672-027X
  • Sala, Xavier|||0000-0002-7779-6313
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Muñoz, Jose|||0000-0001-9529-6980
Due to their promising photoelectronic features, 2D-Germanane (2D-GeH) and their ligand-terminated derivatives (2D-GeR) have garnered significant attention in the Materials Science community. To date, the synthesis of 2D-GeR relies on a tedious topochemical reaction, a fact that not only limits the variety of R ligands that can be incorporated but also restricts their stability and applicability. Herein, a highly stable carbohydrate-based 2D germanane derivative with built-in stereodiscrimination ability has been synthesized via a direct covalent immobilization of a cyclic oligosaccharide selector (viz. thiolated β-cyclodextrin, CD-SH) onto 2D-GeH. By taking advantage of the CD affinity to accommodate different stereoisomers through supramolecular host-guest interactions, the multitasking activity of the resulting 2D-GeCD has been explored for the selective discrimination of enantiomers and diastereomers. Overall, this chemical approach is general and opens up the development of multitasking 2D-GeR derivatives by incorporating supramolecular features, which can be easily extended to a wide range of bio-molecules by tailoring the stereometric host-guest encapsulation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Large scale investigation of GPCR molecular dynamics data uncovers allosteric sites and lateral gateways

  • Aranda-García, David|||0000-0002-5476-2903
  • Stepniewski, Tomasz Maciej|||0000-0002-6828-9192
  • Torrens-Fontanals, Mariona|||0000-0001-6233-8945
  • García Recio, Ädrian|||0000-0002-7143-9075
  • Lopez-Balastegui, Marta
  • Medel-Lacruz, Brian|||0000-0003-2831-7731
  • Morales-Pastor, Adrián
  • Peralta-García, Alejandro
  • Dieguez-Eceolaza, Miguel
  • Sotillo-Nuñez, David
  • Ding, Tianyi|||0000-0002-1989-3705
  • Drabek, Matthäus
  • Jacquemard, Célien|||0000-0002-9633-3429
  • Jakowiecki, Jakub
  • Jespers, Willem|||0000-0002-4951-9220
  • Jiménez-Rosés, Mireia|||0000-0002-4049-8670
  • Jun-Yu-Lim, Víctor
  • Nicoli, Alessandro|||0000-0001-6177-9749
  • Orzel, Urszula
  • Shahraki, Aida
  • Tiemann, Johanna K. S.|||0000-0001-7551-6245
  • Ledesma-Martin, Vicente
  • Nerín-Fonz, Francho|||0000-0002-5548-7608
  • Suárez-Dou, Sergio|||0000-0002-7929-9468
  • Canal, Oriol|||0000-0001-6292-5947
  • Pándy-Szekeres, Gáspár|||0000-0002-7697-2696
  • Mao, Jiafei
  • Gloriam, David E.|||0000-0002-4299-7561
  • Kellenberger, Esther|||0000-0002-9320-4840
  • Latek, Dorota|||0000-0002-0429-0637
  • Guixà González, Ramon|||0000-0003-0397-9800
  • Gutiérrez-de-Terán, Hugo|||0000-0003-0459-3491
  • Tikhonova, Irina G.|||0000-0002-6228-9431
  • Hildebrand, Peter Werner|||0000-0003-0063-1104
  • Filizola, Marta|||0000-0002-4382-8276
  • Babu, Madam M.|||0000-0003-0556-6196
  • Di Pizio, Antonella|||0000-0002-8520-5165
  • Filipek, Slawomir|||0000-0003-3147-3858
  • Kolb, Peter|||0000-0003-4089-614X
  • Cordomí Montoya, Arnau|||0000-0002-3848-2928
  • Giorgino, Toni|||0000-0001-6449-0596
  • Marti-Solano, Maria|||0000-0003-0373-8927
  • Selent, Jana|||0000-0002-1844-4449
G protein-coupled receptors (GPCRs) constitute a functionally diverse protein family and are targets for a broad spectrum of pharmaceuticals. Technological progress in X-ray crystallography and cryogenic electron microscopy has enabled extensive, high-resolution structural characterisation of GPCRs in different conformational states. However, as highly dynamic events underlie GPCR signalling, a complete understanding of GPCR functionality requires insights into their conformational dynamics. Here, we present a large dataset of molecular dynamics simulations covering 60% of currently available GPCR structures. Our analysis reveals extensive local "breathing" motions of the receptor on a nano- to microsecond timescale and provides access to numerous previously unexplored receptor conformational states. Furthermore, we reveal that receptor flexibility impacts the shape of allosteric drug binding sites, which frequently adopt partially or completely closed states in the absence of a molecular modulator. We demonstrate that exploring membrane lipid dynamics and their interaction with GPCRs is an efficient approach to expose such hidden allosteric sites and even lateral ligand entrance gateways. The obtained insights and generated dataset on conformations, allosteric sites and lateral entrance gates in GPCRs allows us to better understand the functionality of these receptors and opens new therapeutic avenues for drug-targeting strategies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Chiral-Induced Spin-Polarized Molecular Switching in a Magneto-Controlled 2D System using Electrical Readouts

  • Lei, Yiming|||0000-0002-3435-6924
  • Campos-Lendínez, Ángel|||0000-0002-7672-027X
  • Spasojevic, Irena|||0000-0002-6426-7009
  • Sala, Xavier|||0000-0002-7779-6313
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sort, Jordi|||0000-0003-1213-3639
  • Muñoz, Jose|||0000-0001-9529-6980
Molecular switches that exhibit bistable electron spins under ambient conditions have attracted growing interest due to their potential applications in quantum technologies, enabling exploitation of the chiral-induced spin selectivity (CISS) phenomenon on electron transfer processes. However, conferring chirality to 2D materials remains a major challenge in Materials Chemistry. Herein, we report the molecular engineering of a chiral spin-filtering 2D material ―viz. 2D germanane (2D─GeH)―functionalized by covalent anchoring of chiral cysteine molecules via nucleophilic substitution. By interfacing the resulting chiral 2D material with a ferromagnetic electrode, we demonstrate the dynamic control of spin polarization by manipulating the external magnetic field, leading to two well-defined and electrically distinguishable quantum states. Additionally, the spin polarization direction can be tailored on-demand via enantiomeric configuration of the chiral ligand, promoting spin-dependent electron transport. These findings establish a platform for fine-tuning the spin polarization in chiral 2D materials, offering new opportunities for writing, erasing, and reading unconventional spin-selective molecular switches, and thereby paving the way for advances in quantum information processing and spintronics applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Sustainable wet-chemical sintering of metal-based 3D-printed electrodes enables high-performance electrochemical transducers

  • Li, Tong
  • Sala, Xavier|||0000-0002-7779-6313
  • Muñoz, Jose|||0000-0001-9529-6980
Fused Filament Fabrication (FFF) enables rapid and low-cost manufacturing of metal-based 3D-printed components with customizable geometries. However, as-printed metallic systems typically suffer from poor electrical conductivity, necessitating tedious activation post-treatments, such as high-temperature annealing or electroplating technologies, to make them suitable for electrochemical applications. While effective, these methods are costly, time-consuming, and environmentally unfriendly, also requiring specialized equipment. Herein, we report a green wet-chemical activation strategy based on sodium borohydride (NaBH), as a mild reducing agent, which induces room-temperature chemical sintering in 3D-printed copper electrodes (3D-CuEs). As a proof-of-concept, the NaBH-activated 3D-CuEs have been successfully applied to the voltammetric determination of nitrate (NO ) in water via nitrate reduction reaction (NRR), exhibiting a wide linear range (1.5-2553 ppm), a low detection limit of 1.5 ppm, and excellent recoveries in real water samples. Overall, this sustainable and scalable activation method provides a versatile route toward the large-scale fabrication of high-performance metal-based 3D-printed electrodes, opening new opportunities for advanced electrochemical applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Molecularly Engineered 2D Xene Heterostructures With Implanted Peroxidase-Like Activity for Mimicking Enzyme Functions

  • Lei, Yiming|||0000-0002-3435-6924
  • Sala, Xavier|||0000-0002-7779-6313
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Muñoz, Jose|||0000-0001-9529-6980
As nature's most refined catalysts, enzymes carry out their functions with outstanding efficiency, making them an inspiring blueprint for the design of artificial catalysts. In this context, 2D nanomaterials and heterostructures that emulate enzyme-like functions (viz. 2D nanozymes) have emerged as promising platforms for catalyzing biologically relevant transformations owing to their high surface area and reduced production costs. Here, we apply molecular engineering to endow enzymatic-like activity on an emerging 2D Xene material, such as allyl germanane (2D-Ge), via electropolymerizing a Co(II)-based molecular catalyst. The resulting 2D-Ge@Co heterostructure exhibits sensitive, selective, and robust electrochemical detection of hydrogen peroxide (H2O2), yielding a micromolar detection limit under physiological conditions. Lastly, its practical applicability is demonstrated by monitoring the in situ generation of H2O2 during an enantiospecific enzymatic reaction, confirming its compatibility with biologically relevant environments. Overall, this work provides a general strategy to molecularly program 2D Xenes by immobilizing tailored molecular catalysts, opening up new opportunities to customize 2D nanozymes for task-specific catalytic applications.
Dipòsit Digital de Documents de la UAB
Publication Libro o Monografía (Book)

Time-Domain Signature Barcodes for Chipless-RFID and Sensing Applications

  • Martín, Ferran|||0000-0002-1494-9167
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Paredes Marco, Ferran|||0000-0002-7252-1169
This book presents an unconventional approach for implementing chipless radiofrequency identification (RFID) systems and related sensors. Contrary to most state-of-the-art chipless-RFID systems, the proposed approach is based on time domain and the tags are read through near field. The book discusses different aspects of these chipless-RFID systems, including tag and reader design, strategies to enhance the data density and capacity, tag programming and erasing, tag implementation in plastic and paper substrates, and synchronous tag reading, among others. A tolerance analysis and validation of the different systems, as well as prospective applications, are also included. The book also offers a comprehensive overview of the state-of-the-art in chipless-RFID technology, including a comparative analysis, which is extended also to chip-based RFID systems. Readers are expected to be familiar with RF/microwave engineering technology. Besides master's and postgraduate students, the book is intended for researchers in the field of radiofrequency identification (RFID) technology, and may be of interest for engineers working in the areas of wireless communications, automatic identification, security, authentication, microwave and wireless sensors, as well as those dealing with internet of things (IoT) and smart systems.
Dipòsit Digital de Documents de la UAB
Publication Libro o Monografía (Book)

Planar Microwave Sensors

  • Martín, Ferran|||0000-0002-1494-9167
  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Su, Lijuan|||0000-0002-4753-9340
Planar Microwave Sensors is an authoritative resource on the subject, discussing the main relevant sensing strategies, working principles, and applications on the basis of the authors’ own experience and background, while also highlighting the most relevant contributions to the topic reported by international research groups. The authors provide an overview of planar microwave sensors grouped by chapters according to their working principle. In each chapter, the working principle is explained in detail and the specific sensor design strategies are discussed, including validation examples at both simulation and experimental level. The most suited applications in each case are also reported. The necessary theory and analysis for sensor design are further provided, with special emphasis on performance improvement (i.e., sensitivity and resolution optimization, dynamic range, etc.). Lastly, the work covers a number of applications, from material characterization to biosensing, including motion control sensors, microfluidic sensors, industrial sensors, and more.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

A versatile multilevel converter platform for cancer treatment using irreversible electroporation

  • Sarnago, Héctor
  • Lucía, Óscar
  • Naval, Alejandro
  • Burdío, José M.
  • Castellví Fernández, Quim
  • Ivorra Cano, Antoni, 1974-
Electroporation is an effective technique based on applying an electric field to cells, commonly used to increase the effectivity of drug and gene delivery. When the applied electric field is strong enough, it can be used for selective cell death with promising results in cancer treatment. This paper proposes the development of a modular multilevel topology in order to provide a high-performance tool for research in electroporation. The proposed converter based on a scalable multicell approach is detailed and analyzed in this paper, and an experimental prototype has been designed and built. The experimental results prove the feasibility of this proposal to enable advanced electroporation techniques., This work was supported in part by Diputación General de Aragón-Fondo Social Europeo, in part by the University of Zaragoza/nunder Grant JIUZ-2014-TEC-08, and in part by the Spanish Ministerio de Economía y Competitividad under Grant CSD2009-00046, Grant TEC2013-42937-R, and Grant Project RTC-2014-1847-6.
Repisalud
Publication Artículo científico (JournalArticle)

Anxiety, Depression and Quality of Life in Older Adults: Trajectories of Influence across Age

  • Ribeiro, Oscar
  • Teixeira, Laetitia
  • Araújo, Lia
  • Rodriguez-Blazquez, Carmen
  • Calderón-Larrañaga, Amaia
  • Forjaz, Maria João
This study focuses on the influence of anxiety and depression on individual trajectories of quality of life in old age through a longitudinal approach. A representative sample of adults aged 50+ living in Portugal and participating in wave 4 (W4) and wave 6 (W6) of the Survey of Health, Ageing and Retirement in Europe (SHARE) project was considered. Participants, 1765 at baseline (W4) and 1201 at follow up (W6), were asked about their quality of life (CASP-12) and emotional status (Euro-D scale; five items from the Beck Anxiety Inventory). Linear Mixed Effects models were performed to identify factors associated with changes in quality of life across age. Increasing age was found to have a significant negative effect on quality of life. Lower education and higher levels of depression and anxiety at baseline were also associated with worse quality of life; 42.1% of the variation of CASP-12 across age was explained by fixed and random effects, being depression followed by anxiety as the factors that presented with the highest relative importance. Both depression and anxiety play an important role in quality of life in older adults and must be acknowledged as important intervention domains to foster healthy and active aging.
Repisalud
Publication Artículo científico (JournalArticle)

The WHO active ageing pillars and its association with survival: Findings from a population-based study in Spain.

  • Hijas-Gomez, Ana Isabel
  • Ayala, Alba
  • Rodríguez-García, M P
  • Rodriguez-Blazquez, Carmen
  • Rojo-Perez, Fermina
  • Fernandez-Mayoralas, Gloria
  • Rodríguez-Laso, Ángel
  • Calderón-Larrañaga, Amaia
  • Forjaz, Maria João
Background: The World Health Organization's active ageing model is based on the optimisation of four key "pillars": health, lifelong learning, participation and security. It provides older people with a policy framework to develop their potential for well-being, which in turn, may facilitate longevity. We sought to assess the effect of active ageing on longer life expectancy by: i) operationalising the WHO active ageing framework, ii) testing the validity of the factors obtained by analysing the relationships between the pillars, and iii) exploring the impact of active ageing on survival through the health pillar. Methods: Based on data from a sample of 801 community-dwelling older adults, we operationalised the active ageing model by taking each pillar as an individual construct using principal component analysis. The interrelationship between components and their association with survival was analysed using multiple regression models. Results: A three-factor structure was obtained for each pillar, except for lifelong learning with a single component. After adjustment for age, gender and marital status, survival was only significantly associated with the physical component of health (HR = 0.66; 95% CI = 0.47-0.93; p = 0.018). In turn, this component was loaded with representative variables of comorbidity and functionality, cognitive status and lifestyles, and correlated with components of lifelong learning, social activities and institutional support. Conclusion: According to how the variables clustered into the components and how the components intertwined, results suggest that the variables loading on the biomedical component of the health pillar (e.g. cognitive function, health conditions or pain), may play a part on survival chances.
Repisalud
Publication Artículo científico (JournalArticle)

Are Loneliness and Social Isolation Associated with Quality of Life in Older Adults? Insights from Northern and Southern Europe

  • Beridze, Giorgi
  • Ayala, Alba
  • Ribeiro, Oscar
  • Fernandez-Mayoralas, Gloria
  • Rodriguez-Blazquez, Carmen
  • Rodríguez-Rodríguez, Vicente
  • Rojo-Perez, Fermina
  • Forjaz, Maria João
  • Calderón-Larrañaga, Amaia
Purpose: Loneliness and social isolation have detrimental effects on health in old age; however, the prospective associations with quality of life (QoL) remain unclear. Furthermore, despite the existence of a European north-south gradient in the distribution of loneliness and social isolation, little is known whether the associations are context-specific. We investigated the relationships between loneliness, social isolation and QoL of older adults residing in the North (Sweden) and South (Spain) of Europe. Methods: Study sample consisted of 2995 Swedish and 4154 Spanish older adults who participated in waves six and seven of the Study on Health, Aging and Retirement in Europe (SHARE). Loneliness and social isolation were measured at the baseline, and QoL was measured at the baseline and follow-up using CASP-12. Prospective associations were assessed via multivariate linear regression. Results: In Sweden, subjects with higher vs. lower loneliness had 1.01 (95% CI: -1.55, -0.40) units lower QoL, while every standard deviation increase in social isolation was associated with a 0.27 (95% CI: -0.42, -0.09)-unit decrease in QoL. In Spain, every standard deviation increase in social isolation was associated with a 0.66 (95% CI: -1.11, -0.22)-unit decrease in QoL. The association was stronger in subjects aged ≤65 years old and those with no chronic diseases. The association with loneliness was not statistically significant in Spain. Conclusion: Loneliness and social isolation are prospectively associated with decreased QoL among older adults, yet the associations are contextually bound. Future interventions should target both exposures, among others, in order to increase QoL in this group.
Repisalud
Publication Artículo científico (JournalArticle)

Psychometric Properties of the CASP-12 Scale in Portugal: An Analysis Using SHARE Data

  • Rodriguez-Blazquez, Carmen
  • Ribeiro, Oscar
  • Ayala, Alba
  • Teixeira, Laetitia
  • Araújo, Lia
  • Forjaz, Maria João
The purpose of this study is to assess the psychometric properties of the Portuguese version of the Control, Autonomy, Self-realization, and Pleasure (CASP)-12 scale used in the Survey of Health, Aging and Retirement in Europe (SHARE) project. Data were obtained from a representative sample of 1666 people aged ≥50 years living in Portugal and participating in the SHARE wave 6. In addition to the CASP-12 scale, sociodemographic data and health status, activity limitation (GALI), depression (Euro-D) and satisfaction with life scores were collected. Data quality and acceptability, construct and structural validity and internal consistency of the CASP-12 scale were analyzed. A Rasch analysis was also performed. CASP-12 total score (mean: 33.3; standard deviation: 5.8, range: 12-48) correlated with Euro-D (-0.57) and with life satisfaction (0.52). Mean scores were significantly lower for women, people aged ≥75 years and those with activity limitations and worse health status (p < 0.001). The confirmatory factor analysis showed good fit to the 4-factor model (root mean squared error of approximation (RMSEA): 0.07; comparative fit index (CFI): 0.90, χ2 (48) = 444.59, p < 0.001), which was confirmed by Rasch analysis (χ2 (36) = 10.089, p = 0.745, person separation index (PSI) = 0.722 for the 4-factor model). For domains, person separation index ranged 0.31-0.79 and Cronbach's alpha, 0.37-0.73. In conclusion, the Portuguese version of the CASP-12 scale presents some inadequacies in acceptability, internal consistency and structural validity.
Repisalud
Publication Artículo científico (JournalArticle)

Setae from the pine processionary moth (Thaumetopoea pityocampa) contain several relevant allergens

  • Rodriguez-Mahillo, Ana Isabel
  • Gonzalez-Muñoz, Miguel
  • Vega, José María
  • Lopez, Juan Antonio
  • Yart, Annie
  • Kerdelhué, Carole
  • Camafeita, Emilio
  • Garcia Ortiz, José Carlos
  • Vogel, Heiko
  • Petrucco Toffolo, Edoardo
  • Zovi, Daniel
  • Battisti, Andrea
  • Roques, Alain
  • Moneo, Ignacio
BACKGROUND: Pine processionary larvae produce urticating hairs (setae) that serve for protection against predators. Setae induce cutaneous reactions in animals and humans. The presence of toxic or allergic mechanisms is a matter of debate. OBJECTIVES: To detect the presence of allergens in setae and to characterize them. MATERIALS AND METHODS: Setae extracts were characterized by gel staining and immunoblot, with sera from patients with immediate reactions and positive prick test reactions, as well as a rabbit antiserum raised against setae. Setae proteins were fractionated by high-performance liquid chromatography. The most relevant allergen was analysed by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS), and its sequence was deduced from an expressed sequence tag bank. Results. Setae contained at least seven different allergens. The most intense detection corresponded to a protein of MW ~ 14,000 that was similar to thaumetopoein, a previously described protein with mast cell-degranulating properties. MALDI-MS-based de novo sequencing provided a partial amino acid sequence different from that of the previously described allergen Tha p 1, and it was named Tha p 2. This allergen was detected in 61% of patients, and it is therefore a new major caterpillar allergen. CONCLUSIONS: Penetration of the setae from the pine processionary caterpillar delivers their allergenic content in addition to causing mechanical or toxic injury.
Repisalud
Publication Artículo científico (JournalArticle)

Clinical Characterization of Parkinson's Disease Patients With Cognitive Impairment

  • Simon-Gozalbo, Ana
  • Rodriguez-Blazquez, Carmen
  • Forjaz, Maria João
  • Martínez-Martín, Pablo
Background: Cognitive impairment is one of the most frequent and disabling non-motor symptoms in Parkinson disease (PD) and encompasses a continuum from mild cognitive impairment (PD-MCI) to dementia (PDD). The risk factors associated with them are not completely elucidated. Objective: To characterize the presence and clinical presentation of PD-MCI and PDD in patients with idiopathic PD, examining motor and non-motor features and determining factors associated with cognitive impairment. Methods: Multicenter, cross-sectional study in 298 PD patients who underwent clinical [Hoehn and Yahr (HY) staging and Clinical Impression of Severity Index for Parkinson Disease], neurological [Scales for Outcomes in Parkinson's Disease (SCOPA)-Motor], neuropsychological (Mini Mental State Examination, SCOPA-Cognition, Frontal Assessment Battery and Clinical Dementia Rating Scale), neuropsychiatric [SCOPA-Psychiatric complications, SCOPA-Psychosocial (SCOPA-PS), and Hospital Anxiety and Depression Scale (HADS)], and health-related quality of life [Parkinson Disease Questionnaire for quality of life (PDQ-8)] assessment. Movement Disorders Society criteria were applied to classify patients as normal cognition (NC), PD-MCI, and PDD. The association between variables was explored using multivariate binary and multinomial logistic regression models. Results: Seventy-two patients (24.2%) were classified as NC, 82 (27.5%) as PD-MCI, and 144 (48.3%) as PDD. These last two groups reported more psychosocial problems related with the disease (mean SCOPA-PS, 16.27 and 10.39, respectively), compared with NC (7.28) and lower quality-of-life outcomes (PDQ-8 48.98 and 28.42, respectively) compared to NC (19.05). The logistic regression analysis showed that both cognitive impaired groups had a more severe stage of PD measured by HY [odds ratio (OR) for MCI-PD, 2.45; 95% confidence interval (CI), 1.22-4.90; OR for PDD 2.64; 95% CI, 1.17-5.98]. Specifically, age (OR, 1.30; 95% CI, 1.16-1.47), years of education (OR, 0.91; 95% CI, 0.83-0.99), disease duration (OR, 1.19; 95% CI, 1.07-1.32), HADS-D (OR, 1.20; 95% CI, 1.06-1.35), and hallucinations (OR, 2.98; 95% CI, 1.16-7.69) were related to PDD. Conclusions: Cognitive impairment in PD is associated with more severe disease stage, resulting in a global, neuropsychiatric, psychosocial, and quality-of-life deterioration. This study provides a better understanding of the great impact that cognitive impairment has within the natural history of PD and its relationship with the rest of motor and non-motor symptoms in the disease.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cost-effective queue schemes for reducing head-of-line blocking in fat-trees

  • Escudero, Jesús
  • García García, Pedro Javier
  • Quiles Flor, Francisco Jose
  • Flich Cardo, José
  • Duato Marín, José Francisco
The fat-tree is one of the most common topologies among the interconnection networks of the systems currently used for high-performance parallel computing. Among other advantages, fat-trees allow the use of simple but very efficient routing schemes. One of them is a deterministic routing algorithm that has been recently proposed, offering a similar (or better) performance than adaptive routing while reducing complexity and guaranteeing in-order packet delivery. However, as other deterministic routing proposals, this deterministic routing algorithm cannot react when high traffic loads or hot-spot traffic scenarios produce severe contention for the use of network resources, leading to the appearance of Head-of-Line (HoL) blocking, which spoils the network performance. In that sense, we describe in this paper two simple, cost-effective strategies for dealing with the HoL-blocking problem that may appear in fat-trees with the aforementioned deterministic routing algorithm. From the results presented in the paper, we conclude that, in the mentioned environment, these proposals considerably reduce HoL-blocking without significantly increasing switch complexity and the required silicon area., This work is jointly supported by the MEC, MICINN and European Commission under projects Consolider Ingenio-2010-CSD2006-00046 and TIN2009-14475-C04, and by the Junta de Comunidades de Castilla-La Mancha under projects PCC08-0078 (PhD grant A08/048) and POII10-0289-3724.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Virtualizing network-on-chip resources in chip-multiprocessors

  • Triviño, Francisco
  • Sánchez, José L.
  • Alfaro, Francisco J.
  • Flich Cardo, José
[EN] The number of cores on a single silicon chip is rapidly growing and chips containing tens or even hundreds of identical cores are expected in the future. To take advantage of multicore chips, multiple applications will run simultaneously. As a consequence, the traffic interferences between applications increases and the performance of individual applications can be seriously affected. In this paper, we improve the individual application performance when several applications are simultaneously running. This proposal is based on the virtualization concept and allows us to reduce execution time and network latency in a significant percentage. © 2011 Elsevier B.V. All rights reserved., This work was supported by the Spanish MEC and MICINN, as well as European Comission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04. It was also partly supported by Junta de Comunidades de Castilla-La Mancha under Grants PCC08-0078-9856, POII10-0289-3724, and by the project NaNoC (project label 248972) which is funded by the European Commission within the Research Programme FP7.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In situ characterization of the high pressure - high temperature melting curve of platinum

  • Anzellini, Simone
  • Monteseguro, Virginia
  • Dewaele, Agnès
  • Burakovsky, Leonid
  • Errandonea, Daniel
  • Bandiello, Enrico|||0000-0003-0956-3195
[EN] In this work, the melting line of platinum has been characterized both experimentally, using synchrotron X-ray diffraction in laser-heated diamond-anvil cells, and theoretically, using ab initio simulations. In the investigated pressure and temperature range (pressure between 10 GPa and 110 GPa and temperature between 300 K and 4800 K), only the face-centered cubic phase of platinum has been observed. The melting points obtained with the two techniques are in good agreement. Furthermore, the obtained results agree and considerably extend the melting line previously obtained in large-volume devices and in one laser-heated diamond-anvil cells experiment, in which the speckle method was used as melting detection technique. The divergence between previous laser-heating experiments is resolved in favor of those experiments reporting the higher melting slope., The authors acknowledge the DLS and ESRF synchrotron facilities for provision of beamtime on the beamlines I15 and ID27, respectively (DLS Ref. NT21190). We thank A. Kleppe, V. Svitlyk and N. Guignot for their help during the experimental set-up. We also acknowledge the support from the Natural Environment Research Council of Great Britain and Northern Ireland via grants NE/M000117/1 and NE/M00046X/1. V.M., E. B., and D. E. are thankful for the financial support to this research from the Spanish Ministerio de Ciencia, Innovacion y Universidades, the Spanish Research Agency, and the European Fund for Regional Development under Grant No. MAT2016-75586-C4-1-P and by Generalitat Valenciana through the grant Prometeo/2018/123 EFIMAT and ValI + D, APOSTD/2017/075.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Power-aware scheduling with effective task migration for real-time multicore embedded systems

  • March Cabrelles, José Luis
  • Duato Marín, José Francisco
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Hassan Mohamed, Houcine|||0000-0002-2038-0587
A major design issue in embedded systems is reducing the power consumption because batteries have a limited energy budget. For this purpose, several techniques such as dynamic voltage and frequency scaling (DVFS) or task migration are being used. DVFS allows reducing power by selecting the optimal voltage supply, whereas task migration achieves this effect by balancing the workload among cores. This paper focuses on power-aware scheduling allowing task migration to reduce energy consumption in multicore embedded systems implementing DVFS capabilities. To address energy savings, the devised schedulers follow two main rules: migrations are allowed at specific points of time and only one task is allowed to migrate each time. Two algorithms have been proposed working under real-time constraints. The simpler algorithm, namely, single option migration (SOM) only checks just one target core before performing a migration. In contrast, the multiple option migration (MOM) searches the optimal target core. In general, the MOM algorithm achieves better energy savings than the SOM algorithm, although differences are wider for a reduced number of cores and frequency/voltage levels. Moreover, the MOM algorithm reduces energy consumption as much as 40% over the worst fit algorithm., This work was supported by the Spanish MICINN, Consolider Programme and Plan E funds, as well as European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High sound screening in low impedance slit arrays

  • Estrada, Héctor
  • Jose Maria Bravo|||0000-0002-8337-7385
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
We report on the key role of the acoustical impedance ratio between the solid and the host fluid in the transmission properties of slit arrays. Numerical calculations predict huge sound screening effects up to 60 dB for low impedance ratio values. The screening band appears over a broad frequency region and is very robust against dissipative losses of the material as well as against the sound incident angle. This counterintuitive result is discussed in terms of the hydrodynamic short circuit, where the fluid and the solid at the radiating interface vibrate out of phase, resulting in a huge sound blocking effect. © IOP Publishing Ltd and Deutsche Physikalische Gesellschaft., We acknowledge financial support from the projects MICINN MAT2010-16879 and Consolider NanoLight.es CSD-2007-0046 of the Spanish Education and Science Ministry and from the project PROMETEO/2010/043 of Generalitat Valenciana. HE acknowledges support from a CSIC-JAE scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

A dynamic power-aware partitioner with task migration for multicore embedded systems

  • March Cabrelles, José Luis
  • Duato Marín, José Francisco
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Hassan Mohamed, Houcine|||0000-0002-2038-0587
Nowadays, a key design issue in embedded systems is how to reduce the power consumption, since batteries have a limited energy budget. For this purpose, several techniques such as Dynamic Voltage Scaling (DVS) or task migration can be used. DVS allows reducing power by selecting the optimal voltage supply, while task migration achieves this effect by balancing the workload among cores. This paper first analyzes the impact on energy due to task migration in multicore embedded systems with DVS capability and using the well-known Worst Fit (WF) partitioning heuristic. To reduce overhead, migrations are only performed at the time that a task arrives to and/or leaves the system and, in such a case, only one migration is allowed. The huge potential on energy saving due to task migration, leads us to propose a new dynamic partitioner, namely DP, that migrates tasks in a more efficient way than typical partitioners. Unlike WF, the proposed algorithm examines which is the optimal target core before allowing a migration. Experimental results show that DP can improve energy consumption in a factor up to 2.74 over the typical WF algorithm. © 2011 Springer-Verlag., This work was supported by Spanish CICYT under Grant TIN2009-14475-C04-01, and by Consolider-Ingenio under Grant CSD2006-00046.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new dielectric metamaterial building block with a strong magnetic response in the sub-1.5-micrometer region: Silicon colloid nanocavities

  • Shi, Lei
  • Tuzer, Turan Umut
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
A new dielectric metamaterial building block based on high refractive index silicon spherical nanocavities with Mie resonances appearing in the near infrared optical region is prepared and characterized. It is demonstrated both experimentally and theoretically that a single silicon nanocavity supports well-defined and robust magnetic resonances, even in a liquid medium environment, at wavelength values up to six times larger than the cavity radius. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim., The authors acknowledge financial support from the following projects FIS2009-07812, Consolider 2007-0046 Nanolight, and the PROMETEO/2010/043. L. S. thanks the financial support from the MINECO (Estancias de profesores e investigadores extranjeros en centros espanoles) fellowship program. T. U. T. acknowledges the FPI fellowship the MINECO.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A low-latency modular switch for CMP systems

  • Roca Pérez, Antoni
  • Duato Marín, José Francisco
  • Flich Cardo, José
  • Silla, Federico|||0000-0002-6435-1200
[EN] As technology advances, the number of cores in Chip MultiProcessor systems and MultiProcessor Systems-on-Chips keeps increasing. The network must provide sustained throughput and ultra-low latencies. In this paper we propose new pipelined switch designs focused in reducing the switch latency. We identify the switch components that limit the switch frequency: the arbiter. Then, we simplify the arbiter logic by using multiple smaller arbiters, but increasing greatly the switch area. To solve this problem, a second design is presented where the routing traversal and arbitrations tasks are mixed. Results demonstrate a switch latency reduction ranging from 10% to 21%. Network latency is reduced in a range from 11% to 15%. © 2011 Elsevier B.V. All rights reserved., This work was supported by the Spanish MEC and MICINN, as well as European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04. It was also partly supported by the project NaNoC (Project Label 248972) which is funded by the European Commission within the Research Programme FP7.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efficient routing in heterogeneous SoC designs with small implementation overhead

  • Cano Reyes, José
  • Roca Pérez, Antoni
  • Duato Marín, José Francisco
  • Coppola, Marcello
  • Locatelli, Riccardo
  • Flich Cardo, José
In application-specific SoCs, the irregularity of the topology ends up in a complex and customized implementation of the routing algorithm, usually relying on routing tables implemented with memory structures at source end nodes. As system size increases, the routing tables also increase in size with nonnegligible impact on power, area, and latency overheads. In this paper, we present a routing implementation for application-specific SoCs able to implement in an efficient manner (with no routing tables and using a small logic block in every switch) a deadlock-free routing algorithm in these irregular networks. The mechanism relies on a tool that maps the initial irregular topology of the SoC system into a logical regular structure where the mechanism can be applied. We provide details for both the mapping tool and the proposed routing mechanism. Evaluation results show the effectiveness of the mapping tool as well as the low area and timing requirements of the mechanism. With the mapping tool and the routing mechanism, complex irregular SoC topologies can now be supported without the need for routing tables., This work was supported by the Spanish MEC and MICINN, as well as European Commission FEDER funds, under Grant CSD2006-00046. It was also partly supported by the COMCAS project (CA501), a project labeled within the framework of CATRENE, the EUREKA cluster for Application and Technology Research in Europe on NanoElectronics.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Colloidal Crystal Thins Films Grown into Corrugated Surface Templates

  • RAMIRO MANZANO, FERNANDO
  • Isabelle Rodriguez|||0000-0001-5479-2494
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
  • Bonet Salom, Elvira
[EN] The influence of patterned surfaces on the formation of one- and two-dimensional colloidal crystals is analyzed. We have used the corrugated surface of a digital versatile disc (DVD) for template surface processing. When the sphere diameter is on the order of the groove width of patterned substrates, a rich variety of particle decorations appear. However, if particle size is much larger than template patterns, large domains of particle ordering are formed., The authors would like to thank A. Moreno for providing wedge type cells, Dr. M. Garin for helpful discussions, and the Electronic Microscopy Service of the UPV for technical support. This work has been partially supported by the Spanish CICyT projects, FIS2009-07812, and Consolider CSD2007-046.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Combining Recency of Information with Selective Random and a Victim Cache in Last-Level Caches

  • Valero Bresó, Alejandro
  • Duato Marín, José Francisco
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
Memory latency has become an important performance bottleneck in current microprocessors. This problem aggravates as the number of cores sharing the same memory controller increases. To palliate this problem, a common solution is to implement cache hierarchies with large or huge Last-Level Cache (LLC) organizations. LLC memories are implemented with a high number of ways (e.g., 16) to reduce conflict misses. Typically, caches have implemented the LRU algorithm to exploit temporal locality, but its performance goes away from the optimal as the number of ways increases. In addition, the implementation of a strict LRU algorithm is costly in terms of area and power. This article focuses on a family of low-cost replacement strategies, whose implementation scales with the number of ways while maintaining the performance. The proposed strategies track the accessing order for just a few blocks, which cannot be replaced. The victim is randomly selected among those blocks exhibiting poor locality. Although, in general, the random policy helps improving the performance, in some applications the scheme fails with respect to the LRU policy leading to performance degradation. This drawback can be overcome by the addition of a small victim cache of the large LLC. Experimental results show that, using the best version of the family without victim cache, MPKI reduction falls in between 10% and 11% compared to a set of the most representative state-of-the-art algorithms, whereas the reduction grows up to 22% with respect to LRU. The proposal with victim cache achieves speedup improvements, on average, by 4% compared to LRU. In addition, it reduces dynamic energy, on average, up to 8%. Finally, compared to the studied algorithms, hardware complexity is largely reduced by the baseline algorithm of the family., This work was supported by the Spanish MICINN, Consolider Programme, and Plan E funds, as well as European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Monodisperse silicon nanocavities and photonic crystals with magnetic response in the optial region

  • Shi, Lei
  • Harris, Justin T.
  • Lu, Xiaotang
  • Korgel, Brian
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • Isabelle Rodriguez|||0000-0001-5479-2494
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
[EN] It is generally accepted that the magnetic component of light has a minor role in the light-matter interaction. The recent discovery of metamaterials has broken this traditional understanding, as both the electric and the magnetic field are key ingredients in metamaterials. The top-down technology used so far employs noble metals with large intrinsic losses. Here we report on a bottom-up approach for processing metamaterials based on suspensions of monodisperse full dielectric silicon nanocavities with a large magnetic response in the near-infrared region. Experimental results and theory show that silicon-colloid-based liquid suspensions and photonic crystals made of two-dimensional arrays of particles have strong magnetic response in the near-infrared region with small optical losses. Our findings might have important implications in the bottom-up processing of large-area low-loss metamaterials working in the near-infrared region., We acknowledge financial support from the following projects FIS2009-07812, Consolider 2007-0046 Nanolight, the PROMETEO/2010/043 and the Robert A. Welch Foundation (F-1464). L.S. thanks the financial support from the MINECO (Estancias de profesores e investigadores extranjeros en centros espanoles) fellowship program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Magnetic interaction in all silicon waveguide spherical coupler device

  • Shi, Lei
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
[EN] The magnetic field component of light in dielectric materials generally plays a negligible role at optical frequency values. However, it is a key component of metal based metamaterials. Here we report on the dominant role of the magnetic interaction in a dielectric spherical silicon nanocavity coupled to a silicon waveguide. The analytical method, as well as the finite difference time domain (FDTD) simulation, show a three dimensional (3D) magnetic trap effect when the magnetic like Mie resonances of the nanocavity are excited. (C)2012 Optical Society of America, The authors acknowledge financial support from the following projects FIS2009-07812, Consolider 2007-0046 Nanolight, and the PROMETEO/2010/043. L. Shi thanks the financial support from the MICINN (Estancias de profesores e investigadores extranjeros en centros espanoles) fellowship program. The authors thank to Dr. E. Xifre-Perez for useful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design, performance, and energy consumption of eDRAM/SRAM macrocells for L1 data caches

  • Valero Bresó, Alejandro
  • Duato Marín, José Francisco
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
SRAM and DRAM have been the predominant technologies used to implement memory cells in computer systems, each one having its advantages and shortcomings. SRAM cells are faster and require no refresh since reads are not destructive. In contrast, DRAM cells provide higher density and minimal leakage energy since there are no paths within the cell from Vdd to ground. Recently, DRAM cells have been embedded in logic-based technology (eDRAM), thus overcoming the speed limit of typical DRAM cells. In this paper, we propose a hybrid n-bit macrocell that implements one SRAM cell and n-1 eDRAM cells. This cell is aimed at being used in an n-way set-associative first-level data cache. Architectural mechanisms (e.g., special writeback policies) have been devised to completely avoid refresh logic. Performance, energy, and area have been analyzed in detail. Experimental results show that using typical eDRAM capacitors, and compared to a conventional cache, a 4-way set-associative hybrid cache reduces both energy consumption and area up to 54 and 29 percent, respectively, while having negligible impact on performance (less than 2 percent)., This work was supported by the Spanish Ministerio de Ciencia e Innovacion (MICINN), and jointly financed with Plan E funds under Grant TIN2009-14475-C04-01 and by Consolider-Ingenio 2010 under Grant CSD2006-00046.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Network-on-Chip Virtualization in Chip-Multiprocessor Systems

  • Triviño, Francisco
  • Sanchez Garcia, Jose Luis
  • Alfaro, Francisco J.
  • Flich Cardo, José
[EN] It is expected that Chip Multiprocessor Systems (CMPs) will contain more and more cores in every new generation. However, applications for these systems do not scale at the same pace. In order to obtain a good CMP utilization several applications will need to coexist in the system and in those cases virtualization of the CMP system will become mandatory. In this paper we analyze two virtualization strategies at NoC-level aiming to isolate the traffic generated by each application to reduce or even eliminate interferences among messages belonging to different applications. The first model handles most interferences among messages with a virtual-channels (VCs) implementation reducing both execution time and network latency. However, using VCs results in area and power overhead due to the cost of control and buffer implementation. In contrast, the second model is based on the resource partitioning strategies which results in a space partitioning of the CMP chip in several regions. For this last model, Virtual-Regions (VR), we use a reconfiguration algorithm of the network that is able to dynamically adapt the network partitions in order to satisfy the application requirements. The paper shows a comparison of both models and identifies their main advantages and disadvantages. From our experimental results, we show that our proposal obtains in terms of execution time average improvements of 30% for parallel applications when compared to a baseline scenario. Moreover, when compared to a VCs implementation, our proposal improves the average execution time by 9% for parallel applications. 2012 Elsevier B.V. All rights reserved., This work was supported by the Spanish MEC and MICINN, as well as European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04. It was also partly supported by JCCM under Grant POII10-0289-3724, and by the project NaNoC (Project label 248972) which is funded by the European Commission within the FP7 Research Programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Combining RAM technologies for hard-error recovery in L1 data caches working at very-low power modes

  • Lorente Garcés, Vicente Jesús
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
  • Valero Bresó, Alejandro
  • Canal, Ramón
  • Duato Marín, José Francisco
Low-power modes in modern microprocessors rely on low frequencies and low voltages to reduce the energy budget. Nevertheless, manufacturing induced parameter variations can make SRAM cells unreliable producing hard errors at supply voltages below Vccmin. Recent proposals provide a rather low fault-coverage due to the fault coverage/overhead trade-off. We propose a new faulttolerant L1 cache, which combines SRAM and eDRAM cells in L1 data caches to provide 100% SRAM hard-error fault coverage. Results show that, compared to a conventional cache and assuming 50% failure probability at low-power mode, leakage and dynamic energy savings are by 85% and 62%, respectively, with a minimal impact on performance., This work was supported by the Spanish MICINN (TIN2010-18368) with the Consolider-Ingenio 2010 Programme co-funded by the European Commission FEDER funds (CSD2006-00046) and co-funded with the Plan E funds (TIN2009-14475-C04-01). Additionaly, it was supported by Generalitat de Catalunya (2009SGR1250), by FP7 program of the European Commission (TRAMS-248789), and by Spanish MINECO (TIN2012-38341-C04-01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Extending magny-cours cache coherence

  • Ros Bardisa, Alberto
  • Cuesta Sáez, Blas Antonio
  • Fernández-Pascual, Ricardo
  • Acacio Sánchez, Manuel E.
  • Robles Martínez, Antonio
  • García Carrasco, José Manuel
  • Duato Marín, José Francisco
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
One cost-effective way to meet the increasing demand for larger high-performance shared-memory servers is to build clusters with off-the-shelf processors connected with low-latency point-to-point interconnections like HyperTransport. Unfortunately, HyperTransport addressing limitations prevent building systems with more than eight nodes. While the recent High-Node Count HyperTransport specification overcomes this limitation, recently launched twelve-core Magny-Cours processors have already inherited it and provide only 3 bits to encode the pointers used by the directory cache which they include to increase the scalability of their coherence protocol. In this work, we propose and develop an external device to extend the coherence domain of Magny-Cours processors beyond the 8-node limit while maintaining the advantages provided by the directory cache. Evaluation results for systems with up to 32 nodes show that the performance offered by our solution scales with the number of nodes, enhancing the directory cache effectiveness by filtering additional messages. Particularly, we reduce execution time by 47 percent in a 32-die system with respect to the 8-die Magny-Cours configuration., This work was supported by the Spanish MICINN, Consolider Programme and Plan E funds, as well as European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04-01/03. It was also partly supported by (PROMETEO from Generalitat Valenciana (GVA) under Grant PROMETEO/2008/060).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A cost-effective heuristic to schedule local and remote memory in cluster computers

  • Serrano Gómez, Mónica
  • Duato Marín, José Francisco
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Hassan Mohamed, Houcine|||0000-0002-2038-0587
Cluster computers represent a cost-effective alternative solution to supercomputers. In these systems, it is common to constrain the memory address space of a given processor to the local motherboard. Constraining the system in this way is much cheaper than using a full-fledged shared memory implementation among motherboards. However, memory usage among motherboards can be unfairly balanced. On the other hand, remote memory access (RMA) hardware provides fast interconnects among the motherboards of a cluster. RMA devices can be used to access remote RAM memory from a local motherboard. This work focuses on this capability in order to achieve a better global use of the total RAM memory in the system. More precisely, the address space of local applications is extended to remote motherboards and is used to access remote RAM memory. This paper presents an ideal memory scheduling algorithm and proposes a cost-effective heuristic to allocate local and remote memory among local applications. Compared to the devised ideal algorithm, the heuristic obtains the same (or closely resembling) results while largely reducing the computational cost. In addition, we analyze the impact on the performance of stand alone applications varying the memory distribution among regions (local, local to board, and remote). Then, this study is extended to any number of concurrent applications. Experimental results show that a QoS parameter is needed in order to avoid unacceptable performance degradation. © 2011 Springer Science+Business Media, LLC., This work was supported by Spanish CICYT under Grant TIN2009-14475-C04-01 and by Consolider-Ingenio under Grant CSD2006-00046.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Acoustic radiation efficiency of a periodically corrugated rigid piston

  • Estrada, Héctor
  • Meseguer Rico, Francisco Javier
  • Uris Martínez, Antonio|||0000-0002-2005-2305
The radiation of sound by a periodically corrugated rigid piston is explored using theoretical and numerical approaches and compared with the radiation of flat rigid piston. The depth and the period of the corrugation are considered to be comparable with the wavelength in the surrounding fluid. Radiation enhancement is predicted due to cavity resonances and coherent diffraction. In addition, broad regions of low radiation efficiency are observed. Both effects could have an impact in acoustic transducers technology, either to increase the piston radiated power or to create a source of evanescent acoustic waves. The possibilities offered by this strategy in the nonlinear acoustic regime are also briefly discussed. (C) 2012 American Institute of Physics., This work has been supported by the Spanish MICINN (MAT2010-16879, Consolider CSD2007-00046 and Universitat Politecnica de Valencia (PAID-06-10-1839). We gratefully acknowledge the valuable help of Javier Garcia de Abajo in the development of the modal model.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Low order modes in microcavities based on silicon colloids

  • Xifre Perez, Elisabet
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
[EN] Silicon colloids based microcavities, with sphere size between 1 and 3 micrometers, have been synthesized and optically characterized. Due to both the small cavity volume and the high refractive index of silicon we are able to tune resonances with extremely low mode index, whose electric field distribution resembles those of electronic orbitals. The value of some parameters such as quality factor Q, effective mode volume, and evanescent field have been calculated for several modes. This calculation indicates silicon colloids can be a serious strategy for developing optical microcavities where may coexist both optical modes with large evanescent fields useful for sensing applications, as well as modes with high Q/V ratio values, of the order of 10(9)(lambda/n)(-3). (C) 2011 Optical Society of America, The authors acknowledge financial support from projects Apoyo a la investigacion 2009 from Universidad Politecnica de Valencia, no reg. 4325, FIS2009-07812, Consolider 2007-0046 Nanolight, PROMETEO/2010/043. E. Xifre-Perez acknowledges the financial support from the program Juan de la Cierva (Spanish Ministerio de Educacion y Ciencia). Finally, we thank Prof. J. Garcia de Abajo for providing us with the MESME theoretical program we have used in the calculation of electric field distribution of the Mie modes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efficient and scalable starvation prevention mechanism for token coherence

  • Cuesta Sáez, Blas Antonio
  • Robles Martínez, Antonio
  • Duato Marín, José Francisco
[EN] Token Coherence is a cache coherence protocol that simultaneously captures the best attributes of the traditional approximations to coherence: direct communication between processors (like snooping-based protocols) and no reliance on bus-like interconnects (like directory-based protocols). This is possible thanks to a class of unordered requests that usually succeed in resolving the cache misses. The problem of the unordered requests is that they can cause protocol races, which prevent some misses from being resolved. To eliminate races and ensure the completion of the unresolved misses, Token Coherence uses a starvation prevention mechanism named persistent requests. This mechanism is extremely inefficient and, besides, it endangers the scalability of Token Coherence since it requires storage structures (at each node) whose size grows proportionally to the system size. While multiprocessors continue including an increasingly number of nodes, both the performance and scalability of cache coherence protocols will continue to be key aspects. In this work, we propose an alternative starvation prevention mechanism, named priority requests, that outperforms the persistent request one. This mechanism is able to reduce the application runtime more than 20 percent (on average) in a 64-processor system. Furthermore, thanks to the flexibility shown by priority requests, it is possible to drastically minimize its storage requirements, thereby improving the whole scalability of Token Coherence. Although this is achieved at the expense of a slight performance degradation, priority requests still outperform persistent requests significantly., This work was partially supported by the Spanish MEC and MICINN, as well as European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04-01. Antonio Robles is taking a sabbatical granted by the Universidad Politecnica de Valencia for updating his teaching and research activities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Progressive congestion management based on packet marking and validation techniques

  • Ferrer Pérez, Joan Lluís
  • Baydal Cardona, María Elvira
  • Robles Martínez, Antonio
  • Duato Marín, José Francisco
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
Congestion management in multistage interconnection networks is a serious problem, which is not solved completely. In order to avoid the degradation of network performance when congestion appears, several congestion management mechanisms have been proposed. Most of these mechanisms are based on explicit congestion notification. For this purpose, switches detect congestion and depending on the applied strategy, packets are marked to warn the source hosts. In response, source hosts apply some corrective actions to adjust their packet injection rate. Although these proposals seem quite effective, they either exhibit some drawbacks or are partial solutions. Some of them introduce some penalties over the flows not responsible for congestion, whereas others can cope only with congestion situations that last for a short time. In this paper, we present an overview of the different strategies to detect and correct congestion in multistage interconnection networks, and propose a new mechanism referred to as Marking and Validation Congestion Management (MVCM), targeted to this kind of lossless networks, and based on a more refined packet marking strategy combined with a fair set of corrective actions, that makes the mechanism able to effectively manage congestion regardless of the congestion degree. Evaluation results show the effectiveness and robustness of the proposed mechanism., This work was supported by the Spanish MEC and MICINN, as well as European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A communication-driven routing technique for application-specific NoCs

  • Tornero, Rafael
  • Orduña Huertas, Juan Manuel
  • Mejia, Andres
  • Duato Marín, José Francisco
  • Flich Cardo, José
Networks on Chip (NoCs) have been shown as an efficient solution to the complex on-chip communication problems derived from the increasing number of processor cores. One of the key issues in the design of NoCs is the reduction of both area and power dissipation. As a result, two-dimensional meshes have become the preferred topology, since it offers low and constant link delay. Unfortunately, manufacturing defects or even real-time failures often make the resulting topology to become irregular, preventing the use of traditional routing algorithms. This scenario shows the need for topology-agnostic routing algorithms that provide a valid routing solution when applied over any topology. This paper proposes a new communication-driven routing technique that optimizes the network performance for Application-Specific NoCs. This technique combines a flexible, topology-agnostic routing algorithm with a communication-aware mapping technique that matches the traffic generated by the application with the available network bandwidth. Since the mapping technique can be pruned as needed in order to fit either quality function values or time constraints, this technique can be adapted to fit with different computational costs. The evaluation results show that it significantly improves network performance in terms of both latency and power consumption., This work has been jointly supported by the Spanish MICINN, the European Commission FEDER funds, and the University of Valencia under grants Consolider-Ingenio 2010 CSD2006-00046, TIN2009-14475-C04-04, and V_SEGLES_PIE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Magnetophotonic Response of Three-Dimensional Opals

  • Caicedo, José Manuel
  • Pascu, Oana
  • López García, Martín
  • Canalejas, Victor
  • Blanco, Álvaro
  • López, Cefe
  • Fontcuberta, Josep
  • Roig, Anna
  • Herranz, Gervasi
[EN] Three-dimensional magnetophotonic crystals (3D-MPCs) are being postulated as appropriate platforms to tailor the magneto-optical spectral response of magnetic materials and to incorporate this functionality in a new generation of optical devices. By infiltrating self-assembled inverse opal structures with monodisperse nickel nanoparticles we have fabricated 3D-MPCs that show a sizable enhancement of the magneto-optical signal at frequencies around the stop-band edges of the photonic crystals. We have established a proper methodology to disentangle the intrinsic magneto-optical spectra from the nonmagnetic optical activity of the 3D-MPCs. The results of the optical and magneto-optical characterization are consistent with a homogeneous magnetic infiltration of the opal structure that gives rise to both a red-shift of the optical bandgap and a modification of the magneto-optical spectral response due to photonic bandgap effects. The results of our investigation demonstrate the potential of 3D-MPCs fabricated following the approach outlined here and offer opportunities to adapt the magneto-optical spectral response at optical frequencies by appropriate design of the opal structure or magnetic field strength., We warmly acknowledge discussions on the subject with Antonio Garcia Martin and Gaspar Armelles (CNM-CSIC). We acknowledge partial financial support from the CSIC CRIMAFOT (PIF 08-016), the Spanish Government (CONSOLIDER-Nanoselect-CSD2007-00041 and NanoLight.es-CSD20070046, MAT2008-06761-C03, MAT2009-08024, MAT2009-06835-E, MAT2009-07841, and FPI grant to J.M.C), the Generalitat de Catalunya (2009SGR-376, 2009SGR-203, and FI grant to O.P.), the Comunidad de Madrid S-0505/ESP-0200, and the EC FP7 NoE Nanophotonics4Energy-248855.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fault-tolerant vertical link design for effective 3D stacking

  • Hernández Luz, Carles|||0000-0003-1192-6223
  • Flich Cardo, José
  • Silla, Federico|||0000-0002-6435-1200
  • Roca Pérez, Antoni
  • Duato Marín, José Francisco
[EN] Recently, 3D stacking has been proposed to alleviate the memory bandwidth limitation arising in chip multiprocessors (CMPs). As the number of integrated cores in the chip increases the access to external memory becomes the bottleneck, thus demanding larger memory amounts inside the chip. The most accepted solution to implement vertical links between stacked dies is by using Through Silicon Vias (TSVs). However, TSVs are exposed to misalignment and random defects compromising the yield of the manufactured 3D chip. A common solution to this problem is by over-provisioning, thus impacting on area and cost. In this paper, we propose a fault-tolerant vertical link design. With its adoption, fault-tolerant vertical links can be implemented in a 3D chip design at low cost without the need of adding redundant TSVs (no over-provision). Preliminary results are very promising as the fault-tolerant vertical link design increases switch area only by 6.69% while the achieved interconnect yield tends to 100%., This work was supported by the Spanish MEC and MICINN, as well as European Comission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04. It was also partly supported by the project NaNoC (project label 248972) which is funded by the European Commission within the Research Programme FP7.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Understanding cache hierarchy contention in CMPs to improve job scheduling

  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Duato Marín, José Francisco
In order to improve CMP performance, recent research has focused on scheduling to mitigate contention produced by the limited memory bandwidth. Nowadays, commercial CMPs implement multi-level cache hierarchies where last level caches are shared by at least two cache structures located at the immediately lower cache level. In turn, these caches can be shared by several multithreaded cores. In this microprocessor design, contention points may appear along the whole memory hierarchy. Moreover, this problem is expected to aggravate in future technologies, since the number of cores and hardware threads, and consequently the size of the shared caches increases with each microprocessor generation. In this paper we characterize the impact on performance of the different contention points that appear along the memory subsystem. Then, we propose a generic scheduling strategy for CMPs that takes into account the available bandwidth at each level of the cache hierarchy. The proposed strategy selects the processes to be co-scheduled and allocates them to cores in order to minimize contention effects. The proposal has been implemented and evaluated in a commercial single-threaded quad-core processor with a relatively small two-level cache hierarchy. Despite these potential contention limitations are less than in recent processor designs, compared to the Linux scheduler, the proposal reaches performance improvements up to 9% while these benefits (across the studied benchmark mixes) are always lower than 6% for a memory-aware scheduler that does not take into account the cache hierarchy. Moreover, in some cases the proposal doubles the speedup achieved by the memory-aware scheduler., This work was supported by the Spanish MICINN, Consolider Programme and Plan E funds, as well as European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Medically Biodegradable Hydrogenated Amorphous Silicon Microspheres

  • Shabir, Q.
  • Pokale, A.
  • Loni, A.
  • Johnson, D. R.
  • Canham, L.T.
  • Tymczenko, Michal Konrad
  • Rodríguez, Marie-Isabelle
  • Cros, Ana
  • Cantarero, Andrés
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
[EN] Hydrogenated amorphous silicon colloids of low surface area (<5 m(2)/g) are shown to exhibit complete in-vitro biodegradation into orthosilicic acid within 10-15 days at 37 degrees C. When converted into polycrystalline silicon colloids, by high temperature annealing in an inert atmosphere, microparticle solubility is dramatically reduced. The data suggests that amorphous silicon does not require nanoscale porosification for full in-vivo biodegradability. This has significant implications for using a-Si:H coatings for medical implants in general, and orthopedic implants in particular. The high sphericity and biodegradability of submicron particles may also confer advantages with regards to contrast agents for medical imaging., This work has been partially supported by the Spanish CICyT projects, FIS2009-07812, Consolider CSD2007-046, MAT2009-010350 and PROMETEO/2010/043.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterizing the impact of process variation on 45 nm NoC-based CMPs

  • Hernández Luz, Carles|||0000-0003-1192-6223
  • Flich Cardo, José
  • Silla, Federico|||0000-0002-6435-1200
  • Roca Pérez, Antoni
  • Duato Marín, José Francisco
[EN] Current integration scales make possible to design chip multiprocessors with a large amount of cores interconnected by a NoC. Unfortunately, they also bring process variation, posing a new burden to processor manufacturers. Regarding the NoC, variability causes that the delays of links and routers do not match those initially established at design time. In this paper we analyze how variability affects the NoC by applying a new variability model to 100 instances of an 8 ¿ 8 mesh NoC synthesized using 45 nm technology. We also show that GALS-based NoCs present communication bottlenecks due to the slower components of the network, which cause congestion, thus reducing performance. This performance reduction finally affects the applications being executed in the CMP because they may be mapped to slower areas of the chip. In this paper we show that using a mapping algorithm that considers variability data may improve application execution time up to 50%. © 2010 Elsevier Inc. All rights reserved., This work was supported by the Spanish MEC and MICINN, as well as European Comission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04. It was also partly supported by the project NaNoC (project label 248972) which is funded by the European Commission within the Research Programme FP7.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact on performance and energy of the retention time and processor frequency in L1 macrocell-based data caches

  • Valero Bresó, Alejandro
  • Duato Marín, José Francisco
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Lorente Garcés, Vicente Jesús
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
[EN] Cache memories dissipate an important amount of the energy budget in current microprocessors. This is mainly due to cache cells are typically implemented with six transistors. To tackle this design concern, recent research has focused on the proposal of new cache cells. An n-bit cache cell, namely macrocell, has been proposed in a previous work. This cell combines SRAM and eDRAM technologies with the aim of reducing energy consumption while maintaining the performance. The capacitance of eDRAM cells impacts on energy consumption and performance since these cells lose their state once the retention time expires. On such a case, data must be fetched from a lower level of the memory hierarchy, so negatively impacting on performance and energy consumption. As opposite, if the capacitance is too high, energy would be wasted without bringing performance benefits. This paper identifies the optimal capacitance for a given processor frequency. To this end, the tradeoff between performance and energy consumption of a macrocell-based cache has been evaluated varying the capacitance and frequency. Experimental results show that, compared to a conventional cache, performance losses are lower than 2% and energy savings are up to 55% for a cache with 10 fF capacitors and frequencies higher than 1 GHz. In addition, using trench capacitors, a 4-bit macrocell reduces by 29% the area of four conventional SRAM cells., This work was supported in part by Spanish CICYT under Grant TIN2009-14475-C04-01, by Consolider-Ingenio 2010 under Grant CSD2006-00046, and by European community’s Seventh Framework Programme (FP7/2007-2013) under Grant 289154.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mirror-image-induced magnetic modes

  • Xifre Perez, Elisabet
  • Shi, Lei
  • Tuzer, Turan Umut
  • Quidant, Romain
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • RAMIRO MANZANO, FERNANDO
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
Reflection in a mirror changes the handedness of the real world, and right-handed objects turn left-handed and vice versa (M. Gardner, The Ambidextrous Universe, Penguin Books, 1964). Also, we learn from electromagnetism textbooks that a flat metallic mirror transforms an electric charge into a virtual opposite charge. Consequently, the mirror image of a magnet is another parallel virtual magnet as the mirror image changes both the charge sign and the curl handedness. Here we report the dramatic modification in the optical response of a silicon nanocavity induced by the Interaction with its image through a flat metallic mirror. The system of real and virtual dipoles can be interpreted as an effective magnetic dipole responsible for a strong enhancement of the cavity scattering cross section., L.S. thanks the MICINN (Estancias de profesores e investigadores extranjeros en centros espanoles) fellowship program for the financial support. The authors acknowledge financial support from the following projects FIS2009-07812, Consolider 2007-0046 Nanolight, and the PRO-METEO/2010/043.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Increasing the effectiveness of directory caches by avoiding the tracking of noncoherent memory blocks

  • Cuesta Sáez, Blas Antonio
  • Ros Bardisa, Alberto
  • Robles Martínez, Antonio
  • Duato Marín, José Francisco
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
A key aspect in the design of efficient multiprocessor systems is the cache coherence protocol. Although directory-based protocols constitute the most scalable approach, the limited size of the directory caches together with the growing size of systems may cause frequent evictions and, consequently, the invalidation of cached blocks, which jeopardizes system performance. Directory caches keep track of every memory block stored in processor caches in order to provide coherent access to the shared memory. However, a significant fraction of the cached memory blocks do not require coherence maintenance (even in parallel applications) because they are either accessed by just one processor or they are never modified. In this paper, we propose to deactivate the coherence protocol for those blocks that do not require coherence. This deactivation means directory caches do not have to keep track of noncoherent blocks, which reduces directory cache occupancy and increases its effectiveness. Since the detection of noncoherent blocks is carried out by the operating system, our proposal only requires minor hardware modifications. Simulation results show that, thanks to our proposal, directory caches can avoid the tracking of about 66 percent (on average) of the blocks accessed by a wide range of applications, thereby improving the efficiency of directory caches. This contributes either to shortening the runtime of parallel applications by 15 percent (on average) while keeping directory cache size or to maintaining performance while using directory caches 16 times smaller., This work was supported by the Spanish MICINN, Consolider Programme and Plan E funds, as well as European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04-01. It was also partly supported by (PROMETEO from Generalitat Valenciana (GVA) under Grant ROMETEO/2008/060). B. Cuesta was with Universitat Politecnica de Valencia while working on this paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

An Hybrid eDRAM/SRAM Macrocell to Implement First-Level Data Caches

  • Valero, Alejandro
  • Canal, Ramon
  • Duato, José
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Lorente Garcés, Vicente Jesús
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
[EN] SRAM and DRAM cells have been the predominant technologies used to implement memory cells in computer systems, each one having its advantages and shortcomings. SRAM cells are faster and require no refresh since reads are not destructive. In contrast, DRAM cells provide higher density and minimal leakage energy since there are no paths within the cell from Vdd to ground. Recently, DRAM cells have been embedded in logic-based technology, thus overcoming the speed limit of typical DRAM cells. In this paper we propose an n-bit macrocell that implements one static cell, and n-1 dynamic cells. This cell is aimed at being used in an n-way set-associative first-level data cache. Our study shows that in a four-way set-associative cache with this macrocell compared to an SRAM based with the same capacity, leakage is reduced by about 75% and area more than half with a minimal impact on performance. Architectural mechanisms have also been devised to avoid refresh logic. Experimental results show that no performance is lost when the retention time is larger than 50K processor cycles. In addition, the proposed delayed writeback policy that avoids refreshing performs a similar amount of writebacks than a conventional cache with the same organization, so no power wasting is incurred., This work was supported by Spanish CICYT under Grant TIN 2006-15516-C04-01, by Consolider-Ingenio 2010 under Grant CSD 2006-00046, by Explora-Ingenio under Grant TIN2008-05338-E, and by Generalitat Valenciana under Grant GV/2009/043. Ramon Canal is supported by the Generalitat de Catalunya under Grant 2009SGR1250, and the Spanish CICYT under Grant TIN2007- 61763.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Therapeutic approaches and development of genomic diagnostic tools for Usher syndrome

  • Fuster García, Carla
[ES] El síndrome de Usher (USH) es un trastorno raro autosómico recesivo definido principalmente por sordera neurosensorial (SNHL), y una distrofia retiniana conocida como retinosis pigmentaria (RP). La patología muestra heterogeneidad genética, puesto que se conocen al menos 10 genes responsables. No obstante, las mutaciones en USH2A son la causa más frecuente de la enfermedad, en gran medida por la recurrencia de la variante patogénica c.2299delG. En esta tesis se ha desarrollado un ensayo de edición génica para revertir dicha anomalía genética por medio del sistema CRISPR/Cas9. Se diseñaron y probaron varios complejos CRISPR específicos de locus, y el más eficiente fue usado para la corrección de la mutación c.2299delG en células derivadas de pacientes. La tasa de corrección de la mutación obtenida fue del 2.5%. Otro objetivo de esta tesis ha sido la caracterización genética de pacientes USH aún sin diagnóstico molecular. Una primera fase implicó la secuenciación masiva dirigida de las regiones codificantes de todos los genes asociados a la enfermedad. Este estudio, cuya cohorte incluyó 58 pacientes no escrutados previamente, permitió la identificación de 42 nuevas mutaciones presuntamente patológicas, y una tasa general de detección de alelos responsables de la enfermedad de prácticamente el 83%. Sorprendentemente, uno de los sujetos presentaba mutaciones en CEP250, uno de los últimos genes correlacionados con la enfermedad. Una exhaustiva revisión clínica reveló que la degeneración retiniana se trataba en realidad de una distrofia de conos y bastones en lugar de RP clásica, lo cual permitió consolidación del gen CEP250 como responsable de un fenotipo similar al USH. El resto de casos sin resolver induce a sospechar de la existencia de otros genes vinculados con USH. Así pues, se analizó el exoma íntegro de dichos casos negativos del panel por medio de secuenciación de exoma completo, lo cual proporcionó resultados relevantes en seis de las muestras estudiadas. Uno de tales sujetos resultó ser un claro caso de fenocopia de USH, al albergar mutaciones patogénicas en dos genes independientes, TECTA y REEP6, siendo el primero responsable de la SNHL y el segundo de la RP. De forma parecida, en otro paciente se detectaron variantes patológicas para RP en el gen EYS, pero no se identificó paralelamente ningún cambio genético que explicara la SNHL. Tres individuos adicionales resultaron haber sido erróneamente diagnosticados como USH, dada la conclusiva inexistencia o ambigüedad de la sordera. Uno de ellos fue definido como homocigoto de una mutación en CNGB1, ya reconocido como responsable de RP. En el segundo de dichos sujetos se identificó una mutación en homocigosis en el gen GRN, cuyos defectos en estado heterocigoto están asociados a demencia frontotemporal y más raramente combinada con RP si ambos alelos se encuentran alterados. Por otro lado, el tercer paciente fue resuelto como heterocigoto compuesto de variantes en WDR19, un gen asociado en mayor medida a una distrofia retiniana acompañada de trastornos renales y, más raramente, a la forma aislada del síntoma. En el último de los seis casos resaltados de este objetivo se detectó una mutación homocigota sin sentido en el gen ASIC5, cuyo papel en el organismo todavía se desconoce. Sin embargo, se han correlacionado funciones visuales y auditivas para miembros de la misma familia proteica. En conjunto, los hallazgos obtenidos en este trabajo avalan la importancia del uso de las más novedosas tecnologías en la búsqueda de soluciones para enfermedades raras, las cuales presentan por ahora un pronóstico terapéutico bastante desamparado. Asimismo, otras consecuencias positivas en cuanto a la caracterización genética de los pacientes son la corroboración (o rectificación) del diagnóstico inicial, así como la contribución a la estimación demográfica y correlaciones de genotipo-fenotipo, que en definit, [CA] La síndrome d'Usher (USH) és una malaltia rara autosòmic recessiu definit principalment per sordera neurosensorial (SNHL) i una distròfia retiniana coneguda com a retinosi pigmentària (RP). La patologia mostra heterogeneïtat genètica, ja que es coneixen almenys 10 gens responsables. No obstant això, les mutacions en USH2A són la causa més freqüent de la malaltia, a causa de la recurrència de la variant patogènica c.2299delG. En aquesta tesi s'ha desenvolupat un assaig d'edició gènica per a revertir la dita anomalia genètica per mitjà del sistema CRISPR/Cas9. Es van dissenyar i van probar diversos complexos CRISPR específics de locus, i el més eficient va ser usat per a la correcció de la mutació en cèl·lules derivades de pacients. La taxa de correcció de la mutació obtinguda va ser del 2.5%. Un altre objectiu d'aquesta tesi ha sigut la caracterització genètica de pacients USH encara sense diagnòstic molecular. Una primera fase va implicar la seqüenciació massiva dirigida de les regions codificants de tots els gens associats a la malaltia. Aquest estudi, la cohort de la qual va incloure 58 pacients no escrutats prèviament, va permetre la identificació de 42 noves mutacions presumptament patològiques, i una taxa general de detecció d'al·lels responsables de la malaltia de pràcticament el 83%. Sorprenentment, un dels subjectes presentava mutacions en CEP250, un dels últims gens correlacionats amb la malaltia. Una exhaustiva revisió clínica va revelar que la degeneració retiniana es tractava en realitat d'una distròfia de cons i bastons en lloc de RP clàssica. Aquestes troballes han permés la consolidació del gen CEP250 com a responsable d'un fenotip similar al USH. La resta de casos sense resoldre induïx a sospitar de l'existència d'altres gens vinculats amb USH. Així, doncs, es va analitzar l'exoma íntegre dels casos negatius del panell a través de seqüenciació d'exoma complet, cosa que va proporcionar resultats rellevants en sis de les mostres estudiades. Un de tals subjectes va resultar ser un clar cas de fenocopia d'USH, a l'albergar mutacions patogèniques en dos gens independents, TECTA i REEP6, sent el primer responsable de la SNHL i el segon de la RP. De forma semblant, en un altre pacient es van detectar variants patològiques per a RP al gen EYS, però no es va identificar paral·lelament cap canvi genètic que explicara la SNHL. Tres individus addicionals van resultar haver sigut erròniament diagnosticats com USH, donada la final inexistència o ambigüitat de la sordera. Un d'ells va ser definit com a homozigot d'una mutació en CNGB1, ja reconegut com a responsable de RP. En el segon d'aquestes subjectes es va identificar una mutació en homozigosi en el gen GRN, els defectes del qual estan associats a demència frontotemporal en estat heterozigot, i més rarament en combinació amb RP si ambdós al·lels es troben alterats. D'altra banda, el tercer pacient va ser resolt com a heterozigot compost de variants en WDR19, un gen associat en major grau a una distròfia retiniana acompanyada de trastorns renals i, més rarament, a la forma aïllada del símptoma. En l'últim dels sis casos ressaltats d'aquest objectiu es va detectar una mutació homozigota sense sentit en el gen ASIC5, el paper en l'organisme del qual encara es desconeix. Amb tot, s'han correlacionat funcions visuals i auditives per a membres de la mateixa família proteica. En conjunt, les troballes obtingudes en aquest treball avalen la importància de l'ús de les més noves tecnologies en la recerca de solucions per a malalties rares, les quals presenten per ara un pronòstic terapèutic prou desemparat. Així mateix, altres conseqüències positives quant a la caracterització genètica dels pacients són la corroboració (o rectificació) del diagnòstic inicial, així com la contribució a l'estimació demogràfica i correlacions de genotip-fenotip, que en definitiva ajuden en la compressió d'US, [EN] Usher syndrome (USH) is a rare autosomal recessive disorder defined essentially by sensorineural hearing loss (SNHL) and a retinal dystrophy known as retinitis pigmentosa (RP). The condition shows a genetic heterogeneity, since there are at least 10 genes known to be causative of the syndrome. However, mutations in USH2A are the most frequent cause of the disease, due in a large measure to the recurrence of the c.2299delG pathogenic variant. A gene editing assay to reverse this specific genetic anomaly was developed in this thesis by means of the groundbreaking CRISPR/Cas9 system. Several locus-specific CRISPR complexes were designed and tested, and the most efficient was used to proceed with the c.2299delG mutation correction on patient-derived cells. The trial resulted in a mutation correction rate of 2.5%. Another goal of this thesis was the genetic characterization of molecularly undiagnosed USH patients. Given the genetic diversity of the disease, the procedure required the implementation of high-throughput sequencing, a technology that enables in bulk sequencing of any number of selected loci (or the indiscriminate totality) of the genome. The first phase implied the targeted sequencing of the coding-relevant regions of all known causative or disease-associated genes at the moment. The study, comprising a cohort of 58 previously unscreened patients, enabled the identification of 42 novel putative pathogenic mutations, and an etiologic-allele detection ratio shy of 83%. Remarkably, one of the subjects harbored nonsense mutations in CEP250, which is one of the latest USH-associated genes. However, an exhaustive review of the clinical features unmasked the retinal degeneration as a cone-rod dystrophy rather than RP, which reinforced the linkage of the gene to an USH-like phenotype. The remaining portion of unresolved cases lead to suspicion of the existence of other genes accountable for USH. Hence, the complete exome of such panel-negative cases was screened through whole exome sequencing. This venture provided relevant findings in six of the surveyed samples. One subject was plainly exposed as an USH phenocopy by harboring pathogenic splice-site mutations in two independent genes, TECTA and REEP6, the former responsible for the SNHL and the latter for the RP. Similarly, RP-causative variants in EYS were detected in another patient, yet no pathogenic changes explaining the HL were discovered. Three additional individuals were ultimately unveiled as USH misdiagnosed cases, being the HL actually absent or ambiguous. One of the patients in this set was homozygous for a mutation in CNGB1, already known to be accountable for RP. The other two cases showed a more peculiar outcome being compound heterozygous for putatively pathogenic variants in genes generally associated to other disorders. One presented a homozygous mutation in GRN, a gene associated to frontotemporal dementia under heterozygous condition and less commonly to combined RP for homozygous alterations. The third subject was found to be a carrier of mutations in WDR19, a gene best associated with retinal disorders accompanied by renal signs and rarely with the isolated visual symptom. The last case presented a homozygous nonsense variant in the ASIC5 gene, whose role has yet to be learned. However, some correlations to visual and hearing functions have been reported for members of the same protein family. Altogether, the results obtained from this work attest to the importance of applying the most up-to-date technologies in the search of solutions for rare diseases that realistically pose a despairing therapeutic prognosis. In addition, the positive consequences of the genetic characterization of the patients are the corroboration (or else correction) of the initial diagnosis, and the contribution to the appraisal of demographic and genotype-phenotype correlations, which ultimately aid in the understanding USH and other related diseases., This work was financially supported by the Institute of Health Carlos III and FEDER funds (ISCIII; grants PI13/00638, PI16/00425, PI16/00539, and PIE13/00046), Fundación ONCE (grant 2015/0398), XVIII Fundaluce-FARPE, and “Telemaratón: Todos Somos Raros, Todos Somos Únicos” (grant IP58). C.F.-G. is a recipient of a fellowship (grant IFI14/00021) from the ISCIII. R.P.V.-M. is a Miguel Servet researcher (grant CP11/00090 funded by ISCIII, Madrid, Spain). The funds from the ISCIII are partially supported by the European Regional Development Fund. R.-P.V.M. is also a Marie Curie fellow (grant CIG322034 from the European Commission).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An effective and feasible congestion management technique for high-performance MINs with tag-based distributed routing

  • Escudero-Sahuquillo, Jesús
  • Garcia Garcia, Pedro-Javier
  • Quiles Flor, Francisco Jose
  • Duato Marín, José Francisco
  • Flich Cardo, José
As parallel computing systems increase in size, the interconnection network is becoming a critical subsystem. The current trend in network design is to use as few components as possible to interconnect the end nodes, thereby reducing cost and power consumption. However, this increases the probability of congestion appearing in the network. As congestion may severely degrade network performance, the use of a congestion management mechanism is becoming mandatory in modern interconnects. One of the most cost-effective proposals to deal with the problems derived from congestion situations is the Regional Explicit Congestion Notification (RECN) strategy, based on using special queues to totally isolate the packet flows which contribute to congestion, thereby preventing the Head-of-Line (HoL) blocking effect that these flows may cause to others. Unfortunately, RECN requires the use of source-based routing, thus not being suitable for interconnects with distributed routing, like InfiniBand. Although some RECN-like mechanisms have been proposed for distributed-routing networks, they are not scalable due to the huge amount of control memory that they require in medium-size or large networks. In this paper, we propose Distributed-Routing-Based Congestion Management (DRBCM), a new scalable technique which, following the RECN principles, totally prevents congestion from producing HoL-blocking in multistage interconnection networks (MINs) using tag-based distributed routing. Simulation results indicate that, regardless of network size, DRBCM presents small resource requirements to keep network performance at maximum level even in scenarios of heavy congestion, where it utterly outperforms (with a gain up to 70 percent) current solutions for distributed-routing networks, like the InfiniBand congestion-control mechanism based on injection throttling. Thus, DRBCM is an efficient, cost-effective, and scalable solution for congestion management., This work was jointly supported by the MEC, MICINN (currently MINECO), and European Commission under the projects Consolider Ingenio-2010-CSD2006-00046 and TIN2009-14475-C04, and by the JCCM under projects PCC08-0078 (PhD. grant A08/048) and POII10-0289-3724.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A HoL-blocking aware mechanism for selecting the upward path in fat-tree topologies

  • Gómez Requena, Crispín
  • Gilabert Villamón, Francisco
  • Duato Marín, José Francisco
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
Large cluster-based machines require efficient high-performance interconnection networks. Routing is a key design issue of interconnection networks. Adaptive routing usually outperforms deterministic routing at the expense of introducing out-of-order packet delivery. Many of the commodity interconnects for clusters are based on fat-trees. The adaptive routing algorithm commonly used in fat-trees is composed of a fully adaptive upward subpath, followed by a deterministic downward subpath. As the latter is determined by the former, choosing the most adequate upward path for each packet is critical in fat-trees to achieve a good performance. In this paper, we present a mechanism for selecting the upward path in fat-trees, which enables optimum use of the available network resources to achieve a high network throughput. The proposed path selection is destination based, which allows reducing the head-of-line blocking effect. Indeed, the proposed mechanism can be used either as a selection function (the provided path is used as the preferred one), or as a deterministic routing algorithm (the path is the only possible one). The results show that the resulting selection function outperforms any other known one. Moreover, the proposed deterministic routing algorithm can achieve a similar, or even higher, level of performance than adaptive routing, while providing in-order packet delivery and a simpler switch implementation., This work was supported by the Spanish Ministerio de Ciencia e Innovacion (MICINN) and jointly financed with Plan E funds, under Grant TIN2009-14475-C04 as well as by Consolider-Ingenio 2010 under Grant CSD2006-00046.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Switch-based packing technique to reduce traffic and latency in token coherence

  • Cuesta Sáez, Blas Antonio
  • Robles Martínez, Antonio
  • Duato Marín, José Francisco
Token Coherence is a cache coherence protocol able to simultaneously capture the best attributes of traditional protocols: low latency and scalability. However it may lose these desired features when (1) several nodes contend for the same memory block and (2) nodes write highly-shared blocks. The first situation leads to the issue of simultaneous broadcast requests which threaten the protocol scalability. The second situation results in a burst of token responses directed to the writer, which turn it into a bottleneck and increase the latency. To address these problems, we propose a switch-based packing technique able to encapsulate several messages (while in transit) into just one. Its application to the simultaneous broadcasts significantly reduces their bandwidth requirements (up to 45%). Its application to token responses lowers their transmission latency (by 70%). Thus, the packing technique decreases both the latency and coherence traffic, thereby improving system performance (about 15% of reduction in runtime). © 2011 Elsevier Inc. All rights reserved., This work was partially supported by the Spanish MEC and MICINN, as well as European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sound transmission through perforated plates with subwavelength hole arrays: a rigid-solid model

  • Estrada, Héctor
  • García de Abajo, F. Javier
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Belmar Ibáñez, Francisco|||0000-0003-4412-0007
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
We present, a model to calculate sound transmission through plates perforated with periodically distributed subwavelength holes. Measurements performed using aluminium-perforated plates immersed in water are compared to predictions obtained with the calculation model. The calculated results agree well with experimental ones. It is also showed, both experimentally and numerically, that the number of the transmission peaks, related to the Fabry-Perot resonances, depends on the plate thickness. Finally the existence of a transmission dip, when the water wavelength is equal to the array period, is a manifestation of the Wood anomaly. (C) 2010 Elsevier B.V. All rights reserved., This work has been supported by the Spanish MICINN (MAT2007-66050 and NanoLight.es) and the EU (NMP4-SL-2008-213669-ENSEMBLE). H. E. acknowledges the support of CSIC-JAEpredoc scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

OBQA: Smart and cost-efficient queue scheme for Head-of-Line blocking elimination in fat-trees

  • Escudero, Jesús
  • García, Pedro J.
  • Quiles, Francisco J.
  • Duato Marín, José Francisco
  • Flich Cardo, José
High-speed interconnection networks are essential elements for different high-performance parallel-computing systems. One of the most common interconnection network topologies is the fat-tree, whose advantages have turned it into the favorite topology of many interconnect designers. One of these advantages is the possibility of using simple but efficient routing algorithms, like the recently proposed deterministic routing algorithm referred to as DET, which offers similar (or better) performance than Adaptive Routing while reducing complexity and guaranteeing in-order packet delivery. However, as other deterministic routing proposals, DET cannot react when packets intensely contend for network resources, leading to the appearance of Head-of-Line (HoL) blocking which spoils network performance. In this paper, we describe and evaluate a simple queue scheme that efficiently reduces HoL-blocking in fat-trees using the DET routing algorithm, without significantly increasing switch complexity and required silicon area. Additionally, we propose an implementation of OBQA in a feasible switch architecture. © 2011 Elsevier Inc. All rights reserved., This work is jointly supported by the MEC, MICINN and European Commission under projects Consolider Ingenio-2010-CSD2006-00046 and TIN2009-14475-C04, and by the Junta de Comunidades de Castilla-La Mancha under projects PCC08-0078 (Ph.D. grant A08/048), and POII10-0289-3724.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Porous silicon microcavities: Synthesis, characterization, and application to photonic barcode devices

  • RAMIRO MANZANO, FERNANDO
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
  • Xifre Perez, Elisabet
  • Garín Escrivá, Moisés
[EN] We have recently developed a new type of porous silicon we name as porous silicon colloids. They consist of almost perfect spherical silicon nanoparticles with a very smooth surface, able to scatter (and also trap) light very efficiently in a large-span frequency range. Porous silicon colloids have unique properties because of the following: (a) they behave as optical microcavities with a high refractive index, and (b) the intrinsic photoluminescence (PL) emission is coupled to the optical modes of the microcavity resulting in a unique luminescence spectrum profile. The PL spectrum constitutes an optical fingerprint identifying each particle, with application for biosensing. In this paper, we review the synthesis of silicon colloids for developing porous nanoparticles. We also report on the optical properties with special emphasis in the PL emission of porous silicon microcavities. Finally, we present the photonic barcode concept. © 2012 Ramiro-Manzano et al., This work has been partially supported by the Spanish CICyT projects, FIS2009-07812, Consolider CSD2007-046, and PROMETEO/2010/043.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the impact of within-die process variation in GALS-Based NoC Performance

  • Hernández Luz, Carles|||0000-0003-1192-6223
  • Silla, Federico|||0000-0002-6435-1200
  • Flich Cardo, José
  • Roca Pérez, Antoni
  • Duato Marín, José Francisco
[EN] Current integration scales allow designing chip multiprocessors (CMP), where cores are interconnected by means of a network-on-chip (NoC). Unfortunately, the small feature size of current integration scales causes some unpredictability in manufactured devices because of process variation. In NoCs, variability may affect links and routers causing them not to match the parameters established at design time. In this paper, we first analyze the way that manufacturing deviations affect the components of a NoC by applying a new comprehensive and detailed within-die variability model to 200 instances of an 8¿8 mesh NoC synthesized using 45 nm technology. Later, we show that GALS-based NoCs present communication bottlenecks under process variation which cannot be avoided by using just device-level solutions but higher level architectural approaches are required. Therefore, to overcome this performance reduction, we draft a novel architectural approach, called performance domains, intended to reduce the negative impact of variability on application execution time. This mechanism is suitable when several applications are simultaneously running in the CMP chip., This work was supported in part by the Spanish MEC and MICINN, as well as European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04, and in part by the project NaNoC (project label 248972), which is funded by the European Commission within the Research Program FP7. This paper was recommended by Associate Editor L.-P. Carloni.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cost-efficient on-chip routing implementations for CMP and MPSoC systems

  • Rodrigo Mocholí, Samuel
  • Roca Pérez, Antoni
  • Medardoni, Simone
  • Bertozzi, Davide
  • Camacho Villanueva, Jesús
  • Duato Marín, José Francisco
  • Flich Cardo, José
  • Silla, Federico|||0000-0002-6435-1200
[EN] The high-performance computing domain is enriching with the inclusion of networks-on-chip (NoCs) as a key component of many-core (CMPs or MPSoCs) architectures. NoCs face the communication scalability challenge while meeting tight power, area, and latency constraints. Designers must address new challenges that were not present before. Defective components, the enhancement of application-level parallelism, or power-aware techniques may break topology regularity, thus, efficient routing becomes a challenge. This paper presents universal logic-based distributed routing (uLBDR), an efficient logic-based mechanism that adapts to any irregular topology derived from 2-D meshes, instead of using routing tables. uLBDR requires a small set of configuration bits, thus being more practical than large routing tables implemented in memories. Several implementations of uLBDR are presented highlighting the tradeoff between routing cost and coverage. The alternatives span from the previously proposed LBDR approach (with 30% of coverage) to the uLBDR mechanism achieving full coverage. This comes with a small performance cost, thus exhibiting the tradeoff between fault tolerance and performance. Power consumption, area, and delay estimates are also provided highlighting the efficiency of the mechanism. To do this, different router models (one for CMPs and one for MPSoCs) have been designed as a proof concept., This work was supported by the Spanish MEC and MICINN, as well as by the European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009- 14475-C04. This work was supported in part by the Project NaNoC (Project Label 248972) which is funded by the European Commission within the Research Programme FP7. This paper was recommended by Associate Editor L. P. Carloni.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A survey and evaluation of topology-agnostic deterministic routing algorithms

  • Flich Cardo, José
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
  • Skeie, . Tor
  • Mejia, Andres
  • Lysne, . Olav
  • Robles Martínez, Antonio
  • Duato Marín, José Francisco
  • Koibuchi, . Michihiro
  • Rokicki, . Tomas
  • Sancho, . Jose Carlos
Most standard cluster interconnect technologies are flexible with respect to network topology. This has spawned a substantial amount of research on topology-agnostic routing algorithms, which make no assumption about the network structure, thus providing the flexibility needed to route on irregular networks. Actually, such an irregularity should be often interpreted as minor modifications of some regular interconnection pattern, such as those induced by faults. In fact, topology-agnostic routing algorithms are also becoming increasingly useful for networks on chip (NoCs), where faults may make the preferred 2D mesh topology irregular. Existing topology-agnostic routing algorithms were developed for varying purposes, giving them different and not always comparable properties. Details are scattered among many papers, each with distinct conditions, making comparison difficult. This paper presents a comprehensive overview of the known topology-agnostic routing algorithms. We classify these algorithms by their most important properties, and evaluate them consistently. This provides significant insight into the algorithms and their appropriateness for different on- and off-chip environments., This work was supported by the Spanish MEC and MICINN, as well as by the European Commission FEDER funds, under Grants CSD2006-00046, TIN2009-14475-C04, and RYC2009-03989.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Silicon-aware distributed switch architecture for on-chip networks

  • Roca Pérez, Antoni
  • Duato Marín, José Francisco
  • Hernández Luz, Carles|||0000-0003-1192-6223
  • Flich Cardo, José
  • Silla, Federico|||0000-0002-6435-1200
[EN] It is well-known that current Chip MultiProcessor (CMP) and high-end MultiProcessor System-on-Chip (MPSoC) designs are growing in their number of components. Networks-on-Chip (NoC) provide the required connectivity for such CMP and MPSoC designs at reasonable costs. As technology advances, links become the critical component in the NoC due to their long delay and power consumption, becoming unacceptable for long global interconnects. In this paper we present a new switch architecture that reduces the negative impact of links on the NoC. We call our proposal distributed switch. The distributed switch spreads the circuitry of the switch onto the links. Thus, packets are buffered, routed, and forwarded at the same time they are crossing the link. Distributing a modular switch onto the link improves the trade off between the power consumption and the operating frequency of the entire network. On the contrary, area resources are increased. Additionally, the distributed switch presents better fault tolerance and process variation behavior with respect to a non-distributed switch., This work was supported by the Spanish MEC and MICINN, as well as by European Commission FEDER funds, under Grant CSD2006-00046. It was also partly supported by the project NaNoC (project label 248972) which is funded by the European Commission within the Research Programme FP7.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Estimación de la Fuerza de Contacto para el Control de Robots Manipuladores con Movimientos Restringidos, Contact force estimation for complaint robot motion control

  • Gámez García, Javier
  • Robertsson, Anders
  • Gómez Ortega, Juan
  • Johansson, Rolf
[ES] En aquellas operaciones robóticas en las que un robot manipulador interactúa con su entorno resulta de extremada importancia poder controlar la fuerza que aquél ejerce sobre este. Con este objetivo, se suele colocar habitualmente un sensor de fuerza en la muñeca del manipulador, cerrando de esta forma el lazo de control. En lo que se refiere a estos sensores, uno de los principales problemas que plantean es que sus medidas están influenciadas no sólo por las fuerzas de contacto, sino también por las fuerzas relacionadas con la dinámica de la herramienta del manipulador, es decir, las fuerzas de inercia. En este artículo se presenta un nuevo estimador de la fuerza de contacto consistente en la integración de la información de sensores de fuerza, posición y aceleración. Además, se describe un procedimiento de calibración automático ‘plug -and- play’ para la identificación y ajuste de los parámetros de este observador. Tanto el observador de la fuerza de contacto como el procedimiento de calibración automático han sido verificados experimentalmente en un robot industrial ABB con arquitectura software abierta., [EN] It is well known that for a robotic manipulator without sensors on the end-effector, the end-effector has to follow a path in its workspace without regard to any feedback other than its joints shaft encoder or resolvers. This fact imposes severe limitations on certain tasks where an interaction between the robot and the environment is needed. However, with the help of sensors, a robot can exhibit an ”adaptive behavior”, the robot being able to deal flexibly with changes in its environment and to execute complicated skilled tasks. In this paper, we firstly propose a new control strategy based on multisensor fusion with three different sensors—that is, encoders mounted at each joint of the robot with six degrees of freedom, a wrist force sensor and an accelerometer—whose goal is to obtain a suitable contact force estimator for the three Cartesian axes. Secondly, the corresponding self-calibration method developed for the commented contact force observer is also proposed. This procedure aims at offering a ‘plug-and-play’ solution for the integration of different kind of accelerometers with the final goal of obtaining an observer capable of estimating the contact force exerted by an industrial robotic manipulator. To validate both the behaviour of the contact force observer and the performance of the self-calibrating procedure, different experiments were carried out on an ABB industrial robot with open control system architecture., Los autores quieren agradecer la subvención parcial de esta investigación a través del proyecto CYCIT DPI2004-04458; del proyecto Autofett GRDI-2000-25135 del Quinto Programa Marco de la unión Europea; y del proyecto NAC02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hardware-based generation of independent subtraces of instructions in clustered processors

  • Ubal Tena, Rafael
  • Duato Marín, José Francisco
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
Multicore chips are currently dominating the microprocessor market as designs that improve performance and sustain power consumption. However, complex core features must be still considered to provide good performance for existing sequential applications. An effective approach to reduce core complexity without dramatically sacrificing performance is to distribute critical processor structures by using clustered microarchitectures. In these designs, communication latency among clusters is a critical performance bottleneck, and a good steering algorithm is required to reduce intercluster communication. In this paper, we propose a new energy-efficient microarchitectural approach that reduces intercluster communication by detecting and generating independent chains of instructions, referred to as subtraces, from the execution of sequential programs. The devised mechanism has been modeled on an x86-based trace-cache processor, where subtraces are built in the fill unit, stored in a trace cache, and individually steered to different clusters. Experimental results show that the proposal reaches performance speedups around 7 and 15 percent for point-to-point and bus-based interconnects, respectively, while achieving energy savings of up to 12 percent., This work was supported by the Spanish MICINN, Consolider Programme, and Plan E funds, as well as European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

A cluster computer performance predictor for memory scheduling

  • Serrano Gómez, Mónica
  • Duato Marín, José Francisco
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Hassan Mohamed, Houcine|||0000-0002-2038-0587
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
Remote Memory Access (RMA) hardware allow a given motherboard in a cluster to directly access the memory installed in a remote motherboard of the same cluster. In recent works, this characteristic has been used to extend the addressable memory space of selected motherboards, which enable a better balance of main memory resources among cluster applications. This way is much more cost-effective than than implementing a full-fledged shared memory system. In this context, the memory scheduler is in charge of finding a suitable distribution of local and remote memory that maximizes the performance and guarantees a minimum QoS among the applications. Note that since changing the memory distribution is a slow process involving several motherboards, the memory scheduler needs to make sure that the target distribution provides better performance than the current one. In this paper, a performance predictor is designed in order to find the best memory distribution for a given set of applications executing in a cluster motherboard. The predictor uses simple hardware counters to estimate the expected impact on performance of the different memory distributions. The hardware counters provide the predictor with the information about the time spent in processor, memory access and network. The performance model used by the predictor has been validated in a detailed microarchitectural simulator using real benchmarks. Results show that the prediction accuracy never deviates more than 5% compared to the real results, being less than 0.5% in most of the cases., This work was supported by Spanish CICYT under Grant TIN2009-14475-C04-01, and by Consolider-Ingenio under Grant CSD2006-00046
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Engineering surface waves in flat phononic plates

  • Estrada, Héctor
  • García de Abajo, F. Javier
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Belmar Ibáñez, Francisco|||0000-0003-4412-0007
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
Surface acoustic-wave phenomena span a wide range of length scales going from the devastation of earthquakes down to image reconstruction of buried nanostructures. In solid-fluid systems, the so-called Scholte-Stoneley waves (SSWs) dominate the scene at the interface with their evanescent fields decaying away into both media. Understanding and manipulating these waves in patterned surfaces would enable new applications of sound to be devised for imaging and acoustic signal processing, although this task has so far remained elusive. Here, we report SSW modes displaying directional gaps and band folding in fluid-loaded solid phononic plates. The plates are inhomogeneously patterned with in-plane periodic modulations of the elastic constants, but present flat surfaces free of corrugations. We experimentally demonstrate control of SSWs, which opens a promising route toward acoustic fluid sensing, microscopy, and signal processing., This work has been supported in part by the Spanish MICINN (MAT2010-16879, MAT2010-14885, Consolider CSD2007-00046, and NanoLight.es), the EU (NMP4-SL-2008-213669-ENSEMBLE), Generalitat Valenciana (PROM-ETEO 2010/043), and Universidad Politecnica de Valencia (PAID-06-10-1839). H.E. acknowledges financial support through JAE from CSIC. We thank B. Bonello for fruitful discussions. We gratefully acknowledge help from J. A. Garcia-Manrique, J. V. Giner, and I. Rodriguez in PP fabrication.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A New Energy-Aware Dynamic Task Set Partitioning Algorithm for Soft and Hard Embedded Real-Time Systems

  • March Cabrelles, José Luis
  • Duato Marín, José Francisco
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Hassan Mohamed, Houcine|||0000-0002-2038-0587
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
Power consumption is a major design concern in current embedded systems. To deal with consumption, many systems apply dynamic voltage scaling (DVS) techniques which dynamically change the system speed depending on the workload characteristics. DVS costs in a multicore system can be reduced by sharing the same DVS regulator among the cores. In this context, to handle energy efficiently, the workload must be properly balanced among the cores. This paper proposes a new heuristic algorithm to balance the workload in an embedded system with a coarse-grain multithreaded multicore processor. This heuristic is aimed at improving the overlapping time between the memory and the processor while keeping balanced core utilizations. To this end, the heuristic dynamically drives the frequency/voltage level to guarantee deadline fulfillment of the hard real-time tasks as well as to achieve a good trade-off between deadline losses and energy savings of the soft real-time tasks. The proposed technique has been evaluated on a model of a contemporary high-end ARM embedded microprocessor executing a set of standard embedded benchmarks. Energy savings depend on the range of frequency/voltage levels that the DVS regulator implements. Experimental results show that with the proposed heuristic, when working with hard real-time tasks, the energy consumption is about 33% the energy dissipated by a system without DVS regulator and balancing heuristic. Moreover, when soft real-time tasks are also considered, the normalized consumption presents values ranging in between 8 and 70% depending on the scheduler aggressiveness., This work was supported by Spanish CICYT under Grant TIN2009-14475-C04-01, by Consolider-Ingenio under Grant CSD2006-00046, by Explora-Ingenio under Grant TIN 2008-05338-E, and by Generalitat Valenciana under Grant GV/2009/043.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

PS-Dir: A Scalable Two-Level Directory Cache

  • Valls, Joan J.
  • Ros Bardisa, Alberto
  • Duato Marín, José Francisco
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
As the number of cores increases in both incoming and future chip multiprocessors, coherence protocols must address novel hardware structures in order to scale in terms of performance, power, and area. It is well known that most blocks accessed by parallel applications are private (i.e., accessed by a single core). These blocks present different directory requirements and behavior than shared blocks. Based on this fact, this paper proposes a two-level directory cache that tracks shared blocks in a small and fast first-level cache and private blocks in a larger and slower second-level cache, namely Shared and Private caches, respectively. Speed and area reasons suggest the use of eDRAM technology much dense but slower than SRAM technology for the Private cache, which in turn brings energy savings. Experimental results for a 16-core system show improvements in performance by 11.1%, in area by 25.4%, and in energy consumption by 20.5% compared to a conventional directory cache., This work has been supported by the Spanish MICINN, as well as European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Designing polyphosphazene derivatives for gene delivery in glioblastoma treatment

  • García Mazás, Carla
  • Bozzato, Elia
  • Araujo Fernández, Jhonathan Angel
  • Quattrini, Federico
  • Preat, Veronique
  • Sánchez Piñón, Laura
  • Csaba, Noemi Stefania
  • García Fuentes, Marcos
Gene therapy presents promising opportunities to target critical pathways in complex cancers like glioblastoma multiforme, though it necessitates the use of efficient delivery vectors. Polyphosphazenes (PPZs) are highly flexible materials that lead to biodegradable, high-performance materials in various applications, including gene delivery. In this work, we synthesized various PPZ derivatives, incorporating primary amines, secondary amines, hydrophilic, and hydrophobic groups, and evaluated their gene transfection capabilities in combination with an anionic polyphosphazene (6MHA-PPZ) that acts as a charge quencher and transfection enhancer. Combining 6MHA-PPZ with a hydrophobic polymer demonstrated the highest gene delivery efficiency and safety, significantly surpassing previous benchmarks. Using these optimized nanoparticles, we delivered a BMP4-expressing plasmid (pBMP4) in glioblastoma models. The pBMP4 nanoparticles, when combined with the chemotherapeutic agent temozolomide (Tz), resulted in significant reductions in tumor volume, improved survival rates in preclinical models, and normalized the expression of drug resistance markers, providing a synergistic antitumoral effect with Tz. This study highlights the potential of PPZ-based nanoparticles for gene delivery and suggests that the combination of pBMP4-NPs and Tz could offer a promising therapeutic strategy for treating glioblastoma.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Viral protein nanoparticles (Part 1): Pharmaceutical characteristics

  • Mellid Carballal, Rocío
  • Gutiérrez Gutiérrez, Sara
  • Rivas, Carmen
  • García Fuentes, Marcos
Viral protein nanoparticles fill the gap between viruses and synthetic nanoparticles. Combining advantageous properties of both systems, they have revolutionized pharmaceutical research. Virus-like particles are characterized by a structure identical to viruses but lacking genetic material. Another type of viral protein nanoparticles, virosomes, are similar to liposomes but include viral spike proteins. Both systems are effective and safe vaccine candidates capable of overcoming the disadvantages of both traditional and subunit vaccines. Besides, their particulate structure, biocompatibility, and biodegradability make them good candidates as vectors for drug and gene delivery, and for diagnostic applications. In this review, we analyze viral protein nanoparticles from a pharmaceutical perspective and examine current research focused on their development process, from production to administration. Advances in synthesis, modification and formulation of viral protein nanoparticles are critical so that large-scale production of viral protein nanoparticle products becomes viable and affordable, which ultimately will increase their market penetration in the future. We will discuss their expression systems, modification strategies, formulation, biopharmaceutical properties, and biocompatibility.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Viral protein-based nanoparticles (part 2): Pharmaceutical applications

  • Mellid Carballal, Rocío
  • Gutiérrez Gutiérrez, Sara
  • Rivas, Carmen
  • García Fuentes, Marcos
Viral protein nanoparticles (ViP NPs) such as virus-like particles and virosomes are structures halfway between viruses and synthetic nanoparticles. The biological nature of ViP NPs endows them with the biocompatibility, biodegradability, and functional properties that many synthetic nanoparticles lack. At the same time, the absence of a viral genome avoids the safety concerns of viruses. Such characteristics of ViP NPs offer a myriad of opportunities for theirapplication at several points across disease development: from prophylaxis to diagnosis and treatment. ViP NPs present remarkable immunostimulant properties, and thus the vaccination field has benefited the most from these platforms capable of overcoming the limitations of both traditional and subunit vaccines. This was reflected in the marketing authorization of several VLP- and virosome-based vaccines. Besides, ViP NPs inherit the ability of viruses to deliver their cargo to target cells. Because of that, ViP NPs are promising candidates as vectors for drug and gene delivery, and for diagnostic applications. In this review, we analyze the pharmaceutical applications of ViP NPs, describing the products that are commercially available or under clinical evaluation, but also the advances that scientists are making toward the implementation of ViP NPs in other areas of major pharmaceutical interest
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

The Role of Cardiorespiratory Fitness on the Risk of Sudden Cardiac Death at the Population Level: a Systematic Review and Meta-Analysis of the Available Evidence.

  • Jiménez Pavón, David
  • Lavie, Carl J.
  • Blair, Steven N.
Cardiorespiratory fitness (CRF) has been widely studied as a powerful and independent predictor of all-cause and disease-specific mortality. Sudden cardiac death (SCD) is recognized as a significant cause of mortality among the general population, including the general population without previous symptoms of any coronary heart disease (CHD). Consequently, SCD is an important public health problem, which constitutes a clinical challenge. Thus, prevention of SCD by detecting early risk factors could be a useful tool, contributing to the American Heart Association's goal of decreasing the incidence of SCD at the population level. The identification of these risk factors for CVD would facilitate the large-scale screening of those participants at higher risk of SCD. This systematic review collects information about the role of CRF on the risk of SCD at the available evidence, and analyzes the long-term influence of CRF as a risk factor and independent predictor of SCD.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

PCR-Based Strategy for Introducing CRISPR/Cas9 Machinery into Hematopoietic Cell Lines

  • González-Romero, E.
  • Martínez-Valiente, C.
  • García-García, G.
  • Rosal Vela, Antonio
  • Millán, J.M.
  • Sanz, M.A.
  • Sanz, G.
  • Liquori, A.
  • Cervera, J.V.
  • Vázquez-Manrique, R.P.
Acute myeloid leukemia is a complex heterogeneous disease characterized by the clonal expansion of undifferentiated myeloid precursors. Due to the difficulty in the transfection of blood cells, several hematological models have recently been developed with CRISPR/Cas9, using viral vectors. In this study, we developed an alternative strategy in order to generate CRISPR constructs by fusion PCR, which any lab equipped with basic equipment can implement. Our PCR-generated constructs were easily introduced into hard-to-transfect leukemic cells, and their function was dually validated with the addition of MYBL2 and IDH2 genes into HEK293 cells. We then successfully modified the MYBL2 gene and introduced the R172 mutation into the IDH2 gene within NB4 and HL60 cells that constitutively expressed the Cas9 nuclease. The efficiency of mutation introduction with our methodology was similar to that of ribonucleoprotein strategies, and no off-target events were detected. Overall, our strategy represents a valid and intuitive alternative for introducing desired mutations into hard-to-transfect leukemic cells without viral transduction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

La evaluación personalizada como estrategia de motivación

  • Arnau Llombart, Vicente
  • Arevalillo-Herráez, Miguel
  • Claver, Jose M.
En el sistema educativo actual, es habitual que el estudiante concentre la mayor parte de su tiempo de estudio en las fechas cercanas a las pruebas de evaluación. Con el objetivo de fomentar el trabajo constante a lo largo del curso, exponemos una metodología docente basada en la evaluación continua y modelable por el alumno, que al mismo tiempo ayuda a evitar el plagio. Por un lado, los laboratorios se evalúan ‘in situ’ mediante una prueba que se realiza durante la sesión, en la que el alumno debe demostrar que ha preparado previamente la práctica y que ha realizado y entendido las actividades realizadas a lo largo de la sesión de laboratorio. Por el otro, en las clases de teoría y problemas, utilizamos trabajos voluntarios consistentes en problemas de dificultad variable y cuya evaluación puede, a elección del alumno, reducir de forma considerable el peso del examen final. Para fomentar el trabajo colaborativo, éstos pueden realizarse opcionalmente en grupo, aunque su corrección se realiza individualmente en horario de tutorías. Esta metodología ha sido utilizada exitosamente en dos asignaturas de la titulación de Ingeniería en Informática de la Universidad de Valencia. En el artículo se exponen los resultados académicos obtenidos, que respaldan su efectividad.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Estrategias de aprendizaje activo basado en trabajos de curso

  • Claver, Jose M.
  • Arevalillo-Herráez, Miguel
  • Pérez-Solano, Juan J.
Los trabajos de curso y boletines de ejercicios de entrega periódica son un elemento útil para desarrollar competencias y promover el aprendizaje fuera del aula. Sin embargo, generalmente esta técnica requiere la corrección de una gran cantidad de trabajos para proporcionar una realimentación adecuada y constante al alumno, una actividad que consume una parte importante del tiempo del profesor. En este artículo presentamos una estrategia que permite proporcionar niveles de realimentación adecuados reduciendo el tiempo de dedicación del docente, al tiempo que sirve como guía para el desarrollo de contenidos y para la consecución de objetivos de la asignatura. Esta propuesta, junto con otras actividades transversales, se ha puesto en marcha en diversas asignaturas. En este artículo presentamos los resultados obtenidos en un caso particular, siendo éstos representativos del resto.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Un juego de ordenador para el aprendizaje de la configuración de los componentes de red

  • Arevalillo-Herráez, Miguel
  • Claver, Jose M.
  • Morán Gómez, Raúl
Los equipos de red avanzados son relativamente caros y el acceso a ellos está generalmente limitado a las sesiones planificadas en los laboratorios disponibles de la universidad. Por ello, es importante sacar el máximo partido del tiempo asignado y reducir la dedicación de los estudiantes a actividades que pueden realizar fuera de las sesiones de laboratorio. La familiarización con el conjunto de comandos de configuración básicos es una de estas actividades. Con este objetivo, hemos desarrollado un juego de ordenador que permite a los estudiantes practicar y aprender éstas en un entorno motivador y agradable. El juego se ha diseñado con reglas sencillas de aprender y se han combinado situaciones de aprendizaje cooperativas y competitivas.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

FRET-mediated amplified spontaneous emission in DNA-CTMA complexes

  • Ibisate, Marta
  • Galisteo-López, Juan F.
  • Esteso, Victoria
  • López, Cefe
The way FRET takes place in dye-doped biopolymer complexes is studied by time-resolved measurements. The efficiency of the energy transfer is controlled by the relative concentration of the donor/acceptor species and described with a distribution of processes. Amplified spontaneous emission in the system and its evolution with the FRET efficiency is monitored., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Viral protein-based nanoparticles (part 2): Pharmaceutical applications

  • Mellid-Carballal, Rocio
  • Gutierrez-Gutierrez, Sara
  • Rivas, Carmen
  • Garcia-Fuentes, Marcos
Viral protein nanoparticles (ViP NPs) such as virus-like particles and virosomes are structures halfway between viruses and synthetic nanoparticles. The biological nature of ViP NPs endows them with the biocompatibility, biodegradability, and functional properties that many synthetic nanoparticles lack. At the same time, the absence of a viral genome avoids the safety concerns of viruses. Such characteristics of ViP NPs offer a myriad of opportunities for theirapplication at several points across disease development: from prophylaxis to diagnosis and treatment. ViP NPs present remarkable immunostimulant properties, and thus the vaccination field has benefited the most from these platforms capable of overcoming the limitations of both traditional and subunit vaccines. This was reflected in the marketing authorization of several VLP- and virosome-based vaccines. Besides, ViP NPs inherit the ability of viruses to deliver their cargo to target cells. Because of that, ViP NPs are promising candidates as vectors for drug and gene delivery, and for diagnostic applications. In this review, we analyze the pharmaceutical applications of ViP NPs, describing the products that are commercially available or under clinical evaluation, but also the advances that scientists are making toward the implementation of ViP NPs in other areas of major pharmaceutical interest., This publication is part of the following grants: PID2021–124986OB-I00 (Project “IMMMA”) funded by MCIN/AEI/ 10.13039/ 501100011033 and by “ERDF A way of making Europe”; AC21_2/00046 (Project “RAIN”) funded by Health Institute Carlos III/MCIN/AEI/ 10.13039/501100011033 and by “European Union NextGenerationEU/EURONANOMED 3; PID2021–126510NB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and “ERDF A way of making Europe”; and ED431G 2019/02 grant funded by Xunta de Galicia. RMC is a recipient of a predoctoral grant from the Ministerio de Educación y FormaciónProfesional (FPU20/01525)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Viral protein nanoparticles (Part 1): Pharmaceutical characteristics

  • Mellid-Carballal, Rocio
  • Gutierrez-Gutierrez, Sara
  • Rivas, Carmen
  • Garcia-Fuentes, Marcos
Viral protein nanoparticles fill the gap between viruses and synthetic nanoparticles. Combining advantageous properties of both systems, they have revolutionized pharmaceutical research. Virus-like particles are characterized by a structure identical to viruses but lacking genetic material. Another type of viral protein nanoparticles, virosomes, are similar to liposomes but include viral spike proteins. Both systems are effective and safe vaccine candidates capable of overcoming the disadvantages of both traditional and subunit vaccines. Besides, their particulate structure, biocompatibility, and biodegradability make them good candidates as vectors for drug and gene delivery, and for diagnostic applications. In this review, we analyze viral protein nanoparticles from a pharmaceutical perspective and examine current research focused on their development process, from production to administration. Advances in synthesis, modification and formulation of viral protein nanoparticles are critical so that large-scale production of viral protein nanoparticle products becomes viable and affordable, which ultimately will increase their market penetration in the future. We will discuss their expression systems, modification strategies, formulation, biopharmaceutical properties, and biocompatibility., This publication is part of the following grants: PID2021–124986OB-I00 (Project “IMMMA”) funded by MCIN/AEI/ 10.13039/ 501100011033 and by “ERDF A way of making Europe”; AC21_2/00046 (Project “RAIN”) funded by Health Institute Carlos III/MCIN/AEI/ 10.13039/501100011033 and by “European Union NextGenerationEU/ EURONANOMED 3. Funding at the laboratory of CR is provided by PID2021–126510NB-I00 funded by MCIN/AEI/10.13039/ 501100011033 and FEDER (a way to build Europe), and by Xunta de Galicia (ED431G 2019/02). RMC is a recipient of a predoctoral grant from the Ministerio de Educación y Formación Profesional (FPU20/01525)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gate current analysis of AlGaN/GaN on silicon heterojunction transistors at the nanoscale

  • Fontserè, Abel
  • Pérez-Tomás, Amador
  • Placidi, Marcel
  • Llobet, Jordi
  • Baron, N.
  • Chenot, S.
  • Cordier, Y.
  • Moreno, J. C.
  • Iglesias, V.
  • Porti, M.
  • Bayerl, A.
  • Lanza, M.
  • Nafría, M.
The gate leakage current of AlGaN/GaN (on silicon) high electron mobility transistor (HEMT) is investigated at the micro and nanoscale. The gate current dependence (25-310 °C) on the temperature is used to identify the potential conduction mechanisms, as trap assisted tunneling or field emission. The conductive atomic force microscopy investigation of the HEMT surface has revealed some correlation between the topography and the leakage current, which is analyzed in detail. The effect of introducing a thin dielectric in the gate is also discussed in the micro and the nanoscale. © 2012 American Institute of Physics., Authors gratefully appreciate financial support from Spanish MICyN grants TEC2008-05577/TEC (THERMOS) and Ingenio-Consolider 2010 CSD2009-00046 (RUE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoscale investigation of AlGaN/GaN-on-Si high electron mobility transistors

  • Fontserè, Abel
  • Pérez-Tomás, Amador
  • Placidi, Marcel
  • Llobet, Jordi
  • Baron, N
  • Chenot, S
  • Cordier, Y
  • Moreno, J C
  • Jennings, M R
  • Gammon, P M
  • Fisher, C A
  • Iglesias, V
  • Porti, M
  • Bayerl, A
  • Lanza, M
  • Nafría, M
AlGaN/GaN HEMTs are devices which are strongly influenced by surface properties such as donor states, roughness or any kind of inhomogeneity. The electron gas is only a few nanometers away from the surface and the transistor forward and reverse currents are considerably affected by any variation of surface property within the atomic scale. Consequently, we have used the technique known as conductive AFM (CAFM) to perform electrical characterization at the nanoscale. The AlGaN/GaN HEMT ohmic (drain and source) and Schottky (gate) contacts were investigated by the CAFM technique. The estimated area of these highly conductive pillars (each of them of approximately 20-50 nm radius) represents around 5% of the total contact area. Analogously, the reverse leakage of the gate Schottky contact at the nanoscale seems to correlate somehow with the topography of the narrow AlGaN barrier regions producing larger currents., This work was partially supported by the Spanish MICyN grants TEC2008-05577/TEC (THERMOS) and Ingenio-Consolider 2010 CSD2009-00046 (RUE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Functional and Consumption Analysis of Integrated Circuits Supplied by Inductive Power Transfer by Powering Modulation and Lock-In Infrared Imaging

  • León, Javier
  • Perpiñà, Xavier
  • Sacristán-Riquelme, Jordi
  • Vellvehi, Miquel
  • Baldi Coll, Antonio
  • Jordà, Xavier
The functionality and consumption of a Radio Frequency IDentification Integrated Circuit (RFID IC) supplied by inductive power transfer has been noninvasively analyzed. This has been done by means of an InfraRed Lock-In Thermography (IR-LIT) system and frequency modulating the RFID IC powering scheme by biasing the external powering coil considering several amplitude modulation waveforms. This generates thermal harmonics at the beating frequency in all IC blocks, enabling their detection as heat sources by IR-LIT. The main aspects addressed in this investigation have been the following: the suitability study of the proposed modulation strategies, the characterization of the coupling between coils and its effects on the RFID blocks, the RFID IC functional analysis, and the dependence of the local energy consumption on the total power delivered to the die. In addition, it has been determined that the RFID IC presents a dysfunction due to the deactivation of some blocks during operation. Results suggest that this unexpected behavior is due to a desynchronization between some of the RFID blocks. Consequently, this stops the internal control signal, deactivates some specific RFID blocks, and ceases the back-telemetry block operation., This work was supported in part by the Spanish Ministry of Science and Innovation (Research Programs: Ramon Y Cajal, contract: RyC2010-07434,and Trench-SiC, contract: TEC2011-22607, Consolider RUE, contract: CSD2009-00046, and Rich, contract: TEC2010-19467) and in part bythe Generalitat de Catalunya (2014-SGR-1596)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermomechanical assessment of die-attach materials for wide bandgap semiconductor devices and harsh environment applications

  • Navarro, Luis A.
  • Perpina, Xavier
  • Godignon, Philippe
  • Montserrat, Josep
  • Banu, Viorel
  • Vellvehi, Miquel
  • Jorda, Xavier
Currently, the demand by new application scenarios of increasing operating device temperatures in power systems is requiring new die-attach materials with higher melting points and suitable thermomechanical properties. This makes the die-attach material selection, die-attaching process, and thermomechanical evaluation a real challenge in nowadays power packaging technology. This paper presents a comparative analysis of the thermomechanical performance of high-temperature die-attach materials (sintered nano-Ag, AuGe, and PbSnAg) under harsh thermal cycling tests. This study is carried out using a test vehicle formed by four dice (considering Si and SiC semiconductors) and Cu substrates. Thermally cycled test vehicles have been thermomechanically evaluated using die-shear tests and acoustic microscopy inspections. Besides, special attention is paid to set up a nano-Ag sintering process, in which the effects of sintering pressure or substrate surface state (roughness and surface activation) on the die-attach layer are analyzed. As a main result, this study shows that the best die-attach adherence is obtained for nano-Ag when pressure is applied on the dice (using a specifically designed press) during the sintering process (11 MPa provided die-shear forces of 53 kgf). However, this die-attach presents a faster thermomechanical degradation under harsh thermal cycling tests than other considered high-temperature die-attach materials (AuGe and PbSnAg) and PbSnAg shows the best thermomechanical performances. © 1986-2012 IEEE., This work is partially funded by the Spanish Ministry Economy and Competitiveness through the Research Program RAMON Y CAJAL (Contract No.: RyC-2010-07434), THERMOS Project (Contract No.:TEC2008-05577, FEDER), TRENCH-SIC Project (Contract No.:TEC2011-22607) and Consolider-RUE (Contract No.: CSD2009-00046)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

Reduced-Order Model of a Half-Bridge Series Resonant Inverter for Power Control in Domestic Induction Heating Applications

  • Domínguez, A.
  • Barragán, L.A.
  • Artigas, J.I.
  • Otín, A.
  • Urriza, I.
  • Navarro, D.
When modeling resonant inverters considering the harmonic balance method, the order of the obtained transfer functions is twice the state variables number. This is explained because two components are considered for each state variable. In order to obtain a simpler transfer function model of a halfbridge series resonant inverter, different techniques of model order reduction have been considered in this work. Thus, a reduced-order model has been obtained by residualization providing much simpler analytical expressions than the original model. The proposed model has been validated by simulation and experimentally. The validity range of the proposed model is extended up to a tenth of the switching frequency. Taking into account the great load variability of induction heating applications, the proposed reduced-order model will allow the design of advanced controllers such as Gain-Scheduling.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Reduced-order models of series resonant inverters in induction heating applications

  • Domínguez, A.
  • Barragán, L.A.
  • Artigas, J.I.
  • Otín Acín, Aránzazu
  • Urriza, I.
  • Navarro, D.
From the controller design framework, a simple analytical model that captures the dominant behavior in the range of interest is the optimal. When modeling resonant circuits, complex mathematical models are obtained. These high-order models are not the most suitable for controller design. Although some assumptions can be made for simplifying these models, variable frequency operation or load uncertainty can make these premises no longer valid. In this work, a systematic modeling order reduction technique, Slowly Varying Amplitude and Phase (SVAP), is considered for obtaining simpler analytical models of resonant inverters. SVAP gives identical results as the classical model-order residualization technique from automatic control theory. A slight modification of SVAP, Slowly Varying Amplitude Derivative and Phase (SVADP) is applied in this paper to obtain a better validity range. SVADP is validated for a half-bridge series resonant inverter (HBSRI) and for a high- order plant, a dual-half bridge series resonant inverter (DHBSRI) giving analytical second-order transfer functions for both topologies. Simulation and experimental results are provided to show the validity range of the reduced-order models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Physical fitnnes, fat distribution and health in school-age children (7 to 12 years) (Condición física, distribucion grasa y salud en escolares aragoneses (7 a 12 años))

  • Casajús, J.A.
  • Ortega, F.B.
  • Vicente-Rodríguez, G.
  • Leiva, M.T.
  • Moreno, L.A.
  • Ara, I.
La condición física, adiposidad y distribución grasa observadas en la infancia, han mostrado tener relación con la salud cardiovascular en la edad adulta. Objetivo: evaluar el nivel de condición física en escolares de 7 a 12 años y su relación con niveles saludables de condición aeróbica y distribución grasa. Se valoraron 1068 niños y niñas aragoneses de 7-12 años de edad. Se evaluó la condición física con la batería Eurofit y el grado de adiposidad y distribución grasa mediante antropometría. Se obtienen valores normativos de condición física. Un 9,1% de los chicos y 4,8% de las chicas presenta riesgo fututo de salud sobre la base de su condición aeróbica. Mejor condición aeróbica se asocia con cantidades significativamente menores de grasa subcutánea total y en el tronco. Es importante incorporar la evaluación del nivel de condición física y distribución grasa en la valoración del riesgo de salud desde edades tempranas.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analytical solution of the induced currents in multilayer cylindrical conductors under external electromagnetic sources

  • Acero, J.
  • Carretero, C.
  • Lope, I.
  • Alonso, R.
  • Burdío, J.M.
We present a closed-form solution for the induced losses in round conductors consisting of several concentric layers. The geometry under study corresponds to an infinitely-long and isolated multilayer cylinder where layers can have different electromagnetic properties and the number of layers is not restricted. The multilayer conductor is under an external time-varying magnetic field which induces currents and, accordingly, generates Joule dissipation. Total induced losses are obtained by integrating the losses of each layer. Mathematical expressions of the current distribution in each layer are derived from the solution of Maxwell''s equations. These expressions consist of a combination of Bessel functions of different kinds and orders. The current distribution in a particular layer not only depends on the properties of the layer but also on the properties of the rest of layers. Consequently, matrix formalism is adopted for describing current distribution of layers. Matrix description is numerically solved and results are compared with finite element simulations for different arrangements and cases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analysis and optimization of the efficiency of induction heating applications with litz-wire planar and solenoidal coils

  • Lope, Ignacio
  • Acero, Jesús
  • Carretero, Claudio
Optimization of the efficiency of an induction heating application is essential in order to improve both reliability and performance. For this purpose, multi-stranded cables with litz structure are often used in induction heating applications. This paper presents an analysis and optimization of the efficiency of induction heating systems focusing on the optimal copper volume of the winding with respect to different constraints. The analysis is based on the concept of a one-strand one-turn coil, which captures the dissipative effects of an induction heating system and reduces the number of variables of the analysis. An expression for the efficiency of the induction heating system is derived. It is found that, with the geometry and the other parameters of the system fixed, efficiency depends on the copper volume of the windings. In order to use this result to optimize the efficiency of an application, volume restrictions, the packing factor and the window utilization factor are also considered. The optimum frequency for an induction heating system is also studied in this work. An experimental verification for both planar and solenoidal cases is also presented.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analysis and design of tubular coils for wireless inductive power transfer systems

  • Acero, J.
  • Serrano, J.
  • Carretero, C.
  • Lope, I.
  • Burdio, J.M.
We evaluate copper tubes as alternative of litz wire for planar coils of inductive power transfer (IPT) systems. For this purpose, a design methodology focused on maximizing the product of the magnetic coupling and the quality factor is proposed. The methodology is based on a combination of FEA simulations and analytical calculations of the skin and proximity losses in the tube. Analytical calculations are based on solutions of Maxwell''s equations for a tubular geometry. These solutions are oriented to extract both skin and proximity losses in the tube. Performance of a prototype of 1.5 kW is evaluated and compared with a conventional litz-wire implementation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Inheritance of self-And graft-incompatibility traits in an F 1 apricot progeny

  • Irisarri, Patricia
  • Zhebentyayeva, Tatyana
  • Errea, Pilar
  • Pina, Ana
Floral self-incompatibility affecting yearly yield in a weather-dependent manner and graft incompatibility affecting longevity of mature trees are two important traits for apricot production. However, genetic control of graft compatibility and relationship between these traits are unknown. Here, we analyzed its inheritance in an F 1 apricot progeny from a cross between self- and graft- incompatible and self- and graft-compatible cultivars. Hybrid individuals were genotyped for establishing self-incompatibility status and grafted on the plum rootstock ‘Marianna 2624’. Phenotyping of graft incompatibility was done at two time points, one month and one year after grafting. Anatomical (necrotic layer, bark and wood discontinuity for two consecutive years) and cytomorphological (cell proliferation, cell arrangement and cell shape one month after grafting) characteristics related to graft compatibility displayed continuous variation within the progeny, suggesting a polygenic inheritance. Using the Pearson correlation test, strong and significant correlations were detected between anatomical and cytomorphological traits that may reduce the number of characters for screening genotypes or progenies for graft compatibility in segregating crosses. Furthermore, no correlation existed between self- and graft incompatibility traits suggesting that they are independent inheritance traits. Hence, screening an extended hybrid population is required for pyramiding these traits in breeding programs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Physical fitness reference standards for preschool children: The PREFIT project

  • Cadenas-Sanchez, C.
  • Intemann, T.
  • Labayen, I.
  • Peinado, A.B.
  • Vidal-Conti, J.
  • Sanchis-Moysi, J.
  • Moliner-Urdiales, D.
  • Rodriguez Perez, M.A.
  • Cañete Garcia-Prieto, J.
  • Fernández-Santos, J.D.R.
  • Martinez-Tellez, B.
  • Vicente-Rodríguez, G.
  • Löf, M.
  • Ruiz, J.R.
  • Ortega, F.B.
Objectives: Reference values are necessary for classifying children, for health screening, and for early prevention as many non-communicable diseases aggravate during growth and development. While physical fitness reference standards are available in children aged 6 and older, such information is lacking in preschool children. Therefore, the purposes of this study were (1) to provide sex-and age-specific physical fitness reference standards for Spanish preschool children; and (2) to study sex differences across this age period and to characterise fitness performance throughout the preschool period. Design: Cross-sectional. Methods: A total of 3179 preschool children (1678 boys) aged 2.8–6.4 years old from Spain were included in the present study. Physical fitness was measured using the PREFIT battery. Results: Age- and sex-specific percentiles for the physical fitness components are provided. Boys performed better than girls in the cardiorespiratory fitness, muscular strength, and speed-agility tests over the whole preschool period studied and for the different percentiles. In contrast, girls performed slightly better than boys in the balance test. Older children had better performance in all fitness tests than their younger counterparts. Conclusions: Our study provides age- and sex-specific physical fitness reference standards in preschool children allowing interpretation of fitness assessment. Sexual dimorphism in fitness tests exists already at preschool age, and these differences become larger with age. These findings will help health, sport, and school professionals to identify preschool children with a high/very low fitness level, to examine changes in fitness over time, and to analyse those changes obtained due to intervention effects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Snakes and ladders: World development pathways’ synergies and trade-offs through the lens of the Sustainable Development Goals

  • Philippidis, George
  • Shutes, Lindsay
  • M''Barek, Robert
  • Ronzon, Tévécia
  • Tabeau, Andrzej
  • van Meijl, Hans
This paper takes three global visions of world development to 2050 and quantifies their implications for sustainable progress employing the metrics of the Sustainable Development Goals (SDGs). The SDG outcomes are structured through the interconnectivities of the three ‘wedding cake’ layers of ‘economy’, ‘society’ and ‘biosphere’, as posited by the Stockholm Resilience Centre. The key policy contribution is to quantify the resulting SDG synergies and trade-offs, whilst also decomposing and calculating the part-worth of the market drivers which contribute to these outcomes. The paper employs a global economic simulation model that combines rational market behaviour with environmental constraints (MAGNET) and is further extended with an SDG metrics module. A ‘non-sustainable’ world reveals trade-offs between economy and biosphere SDGs, with population growth of particular concern to a safe planetary operating space in the world''s poorest regions. Sustainable visions could reduce natural resource pressures and emissions and meet energy requirements at potentially limited economic cost. Notwithstanding, these futures do not address income inequalities and potentially increase food security concerns for the most vulnerable members of society. Consequently, developed region led international cooperation and in-kind income transfers to developing countries, constitutes a necessary prerequisite to help remedy the SDG trade-offs exhibited within the more sustainable global pathways.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The effects of age, organized physical activity and sedentarism on fitness in older adults: An 8-year longitudinal study

  • Gómez-Bruton, Alejandro
  • Navarrete-Villanueva, David
  • Pérez-Gómez, Jorge
  • Vila-Maldonado, Sara
  • Gesteiro, Eva
  • Gusi, Narcis
  • Villa-Vicente, José G.
  • Espino, Luis
  • González-Gross, Marcela
  • Casajús, José A.
  • Ara, Ignacio
  • Gómez-Cabello, Alba
  • Vicente-Rodríguez, Germán
The aims of the present study were (1) to describe the changes in physical fitness during an 8 year follow-up in a large sample of Spanish adults aged 65 or over that are initially engaged in organized physical activity (OPA), (2) to compare fitness changes according to different age groups (65 to 69 vs. 70 to 74 vs. =75 years-old), (3) to evaluate the independent and combined effects of changes in OPA engagement and sitting time (ST) on physical fitness. A total of 642 (147 males) non-institutionalized over 65 years-old participants completed the EXERNET battery fitness tests and completed a validated questionnaire from which information regarding OPA and ST were collected. All participants completed evaluations in 2008-2009 and in 2016-2017. An impairment of fitness-related variables happens after 65 years of age in both males and females, with the older participants (=75), showing the largest decreases. Males who continued performing OPA demonstrated lower decreases in balance, leg flexibility and agility when compared to those who stopped performing OPA during the follow-up. Females who continued performing OPA demonstrated lower decreases of all variables except for balance when compared to those who stopped performing OPA during the follow-up.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Living at the water's edge: A world-wide econometric panel estimation of arable water footprint drivers

  • Gracia-de-Rentería, P.
  • Philippidis, G.
  • Ferrer-Pérez, H.
  • Sanjuán, A.I.
As part of the Sustainable Development Goal (SDG) for ensuring clean water and sanitation worldwide by 2030, SDG target 6.4 seeks to attain sustainable withdrawals of freshwater through efficiency gains with a view to relieving water stress in vulnerable populated areas. The water footprint (WF) is a key metric to measure this concept, although the dynamics of the drivers of the WF through space and time remain relatively under-researched, whilst in foresight studies, the WF is often subject to simplistic assumptions. Thus, constructing a panel dataset of 130 countries and 156 crops for the period 2002-2016, this paper empirically assesses the sign and magnitude of WF drivers of agricultural crop activities, employing a careful selection of demographic, economic and climatic drivers. The study uncovers evidence of significant deviations in WF drivers across regions segmented by relative wealth, relating specifically to the stage of economic development and the presence (absence) of economies of scale, whilst we confirm that geographical coordinates have a major bearing on the climatic WF driver. Moreover, examining the temporal dimension, there is compelling evidence supporting a structural break in the role that technical progress exerted on the WF prior to, and in the wake of, the 2008 financial crisis.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The relative age effect on physical fitness in preschool children

  • Cupeiro, R.
  • Rojo-Tirado, M.A.
  • Cadenas-Sanchez, C.
  • Artero, E.G.
  • Peinado, A.B.
  • Labayen, I.
  • Dorado, C.
  • Arias-Palencia, N.M.
  • Moliner-Urdiales, D.
  • Vidal-Conti, J.
  • Conde-Caveda, J.
  • Mora-Gonzalez, J.
  • Vicente-Rodríguez, G.
  • Benito, P.J.
The aim of the present study was to investigate the existence of a relative age effect (RAE) on physical fitness of preschoolers. Anthropometry and physical fitness were assessed in 3147 children (3–5 years old) using the PREFIT battery. Based on the birth year, participants were divided into 3year groups (3-, 4- and 5-years). Within each year group, 4quarter groups were created: quarter 1, preschoolers born from January to March; quarter 2, from April to June; quarter 3, from July to September; quarter 4, from October to December. The MANCOVA analysis revealed a main effect of year group (Wilks’ ¿ = 0.383; F10, 5996 = 369.64; p < 0.001, ¿p 2 = 0.381) and of quarter (Wilks’ ¿ = 0.874; F15, 8276.6 = 27.67; p < 0.001; ¿p 2 = 0.044) over the whole battery of tests. To the best of our knowledge, this is the first study to report the existence of RAE at the preschool stage. In general, performance improved as the relative age increased (i.e., those born in quarter 1 performed better than those in the other quarters). Individualization strategies should be addressed within the same academic year not only in elementary or secondary years but also in preschoolers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Association Between Physical Fitness and Bone Strength and Structure in 3- to 5-Year-Old Children

  • Gómez-Bruton, A.
  • Marín-Puyalto, J.
  • Muñiz-Pardos, B.
  • Lozano-Berges, G.
  • Cadenas-Sanchez, C.
  • Matute-Llorente, A.
  • Gómez-Cabello, A.
  • Moreno, L.A.
  • Gonzalez-Agüero, A.
  • Casajus, J.A.
  • Vicente-Rodríguez, G.
Background: The positive association between physical fitness and bone structure has been widely investigated in children and adolescents, yet no studies have evaluated this influence in young children (ie, preschoolers). Hypothesis: Fit children will present improved bone variables when compared with unfit children, and no sex-based differences will emerge in the sample. Study Design: Cross-sectional study. Level of Evidence: Level 3. Methods: Handgrip strength, standing long jump (SLJ), speed/agility, balance, and cardiorespiratory fitness (CRF) were assessed using the Assessing FITness levels in PREschoolers (PREFIT) test battery in 92 children (50 boys; age range, 3-5 years). A peripheral quantitative computed tomography scan was performed at 38% of the length of the nondominant tibia. Cluster analysis from handgrip strength, SLJ, speed/agility, and CRF was developed to identify fitness groups. Bone variables were compared between sexes and between cluster groups. The association between individual physical fitness components and different bone variables was also tested. Results: Three cluster groups emerged: fit (high values on all included physical fitness variables), strong (high strength values and low speed/agility and CRF), and unfit (low strength, speed/agility, and CRF). The fit group presented higher values than the strong and unfit groups for total and cortical bone mineral content, cortical area, and polar strength strain index (all P < 0.05). The fit group also presented a higher cortical thickness when compared with the unfit group (P < 0.05). Handgrip, SLJ, and speed/agility predicted all bone variables except for total and cortical volumetric bone mineral density. No differences were found for bone variables between sexes. Conclusion: The results suggest that global fitness in preschoolers is a key determinant for bone structure and strength but not volumetric bone mineral density. Clinical Relevance: Physical fitness is a determinant for tibial bone mineral content, structure, and strength in very young children. Performing physical fitness tests could provide useful information related to bone health in preschoolers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mapping quantitative trait Loci associated with graft (In)compatibility in apricot (Prunus armeniaca L.)

  • Pina, A.
  • Irisarri, P.
  • Errea, P.
  • Zhebentyayeva, T.
Graft incompatibility (GI) between the most popular Prunus rootstocks and apricot cultivars is one of the major problems for rootstock usage and improvement. Failure in producing long-leaving healthy grafts greatly affects the range of available Prunus rootstocks for apricot cultivation. Despite recent advances related to the molecular mechanisms of a graft-union formation between rootstock and scion, information on genetic control of this trait in woody plants is essentially missing because of a lack of hybrid crosses, segregating for the trait. In this study, we have employed the next-generation sequencing technology to generate the single-nucleotide polymorphism (SNP) markers and construct parental linkage maps for an apricot F1 population “Moniqui (Mo)” × “Paviot (Pa)” segregating for ability to form successful grafts with universal Prunus rootstock “Marianna 2624”. To localize genomic regions associated with this trait, we genotyped 138 individuals from the “Mo × Pa” cross and constructed medium-saturated genetic maps. The female “Mo” and male “Pa” maps were composed of 557 and 501 SNPs and organized in eight linkage groups that covered 780.2 and 690.4 cM of genetic distance, respectively. Parental maps were aligned to the Prunus persica v2.0 genome and revealed a high colinearity with the Prunus reference map. Two-year phenotypic data for characters associated with unsuccessful grafting such as necrotic line (NL), bark and wood discontinuities (BD and WD), and an overall estimate of graft (in)compatibility (GI) were collected for mapping quantitative trait loci (QTLs) on both parental maps. On the map of the graft-compatible parent “Pa”, two genomic regions on LG5 (44.9–60.8 cM) and LG8 (33.2–39.2 cM) were associated with graft (in)compatibility characters at different significance level, depending on phenotypic dataset. Of these, the LG8 QTL interval was most consistent between the years and supported by two significant and two putative QTLs. To our best knowledge, this is the first report on QTLs for graft (in)compatibility in woody plants. Results of this work will provide a valuable genomic resource for apricot breeding programs and facilitate future efforts focused on candidate genes discovery for graft (in)compatibility in apricot and other Prunus species.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

European union agricultural support ‘coupling’ in simulation modelling: measuring the sustainability impacts

  • Boulanger, P.
  • Boysen-Urban, K.
  • Philippidis, G.
Over the last twenty years, the Common Agricultural Policy of the European Union has evolved into a multifunctional policy instrument. As part of this transformation, most farmer receipts are paid independently of production, granting this class of payment production-neutral or ‘fully decoupled’ status. In prospective agricultural market studies, simulation models routinely represent these payments as decoupled, despite academic evidence to the contrary that posits a number of ‘coupling-channels’. To explore the ramifications of differing degrees of coupling on the three pillars of sustainability, a natural-resources focused simulation model is employed. Comparing with a ‘standard’ decoupled baseline to 2030, higher coupling increases global agricultural employment and reduces production intensity on European Union agricultural land and agricultural emissions. Higher coupling also diminishes the Common Agricultural Policy’s capacity as a safety-net for European Union food-security and agricultural employment, whilst there is tentative evidence of increasing emissions ‘leakage’. At the very least, if the non-distorting status of decoupled payments is mis-specified, this has direct implications for the design of greener policy initiatives under the auspices of the Green Deal that promote sustainable fairer trade. As a result, further empirical research on the production distorting effects of the European Union’s decoupled payments is needed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Relative sit-to-stand power: aging trajectories, functionally relevant cut-off points, and normative data in a large European cohort

  • Alcazar J.
  • Alegre L.M.
  • Van Roie E.
  • Magalhães J.P.
  • Nielsen B.R.
  • González-Gross M.
  • Júdice P.B.
  • Casajús J.A.
  • Delecluse C.
  • Sardinha L.B.
  • Suetta C.
  • Ara I.
Background: A validated, standardized, and feasible test to assess muscle power in older adults has recently been reported: the sit-to-stand (STS) muscle power test. This investigation aimed to assess the relationship between relative STS power and age and to provide normative data, cut-off points, and minimal clinically important differences (MCID) for STS power measures in older women and men. Methods: A total of 9320 older adults (6161 women and 3159 men) aged 60–103 years and 586 young and middle-aged adults (318 women and 268 men) aged 20–60 years were included in this cross-sectional study. Relative (normalized to body mass), allometric (normalized to height squared), and specific (normalized to legs muscle mass) muscle power values were assessed by the 30 s STS power test. Body composition was evaluated by dual energy X-ray absorptiometry and bioelectrical impedance analysis, and legs skeletal muscle index (SMI; normalized to height squared) was calculated. Habitual and maximal gait speed, timed up-and-go test, and 6 min walking distance were collected as physical performance measures, and participants were classified into two groups: well-functioning and mobility-limited older adults. Results: Relative STS power was found to decrease between 30–50 years (-0.05 W·kg-1·year-1; P > 0.05), 50–80 years (-0.10 to -0.13 W·kg-1·year-1; P < 0.001), and above 80 years (-0.07 to -0.08 W·kg-1·year-1; P < 0.001). A total of 1129 older women (18%) and 510 older men (16%) presented mobility limitations. Mobility-limited older adults were older and exhibited lower relative, allometric, and specific power; higher body mass index (BMI) and legs SMI (both only in women); and lower legs SMI (only in men) than their well-functioning counterparts (all P < 0.05). Normative data and cut-off points for relative, allometric, and specific STS power and for BMI and legs SMI were reported. Low relative STS power occurred below 2.1 W·kg-1 in women (area under the curve, AUC, [95% confidence interval, CI] = 0.85 [0.84–0.87]) and below 2.6 W·kg-1 in men (AUC [95% CI] = 0.89 [0.87–0.91]). The age-adjusted odds ratios [95% CI] for mobility limitations in older women and men with low relative STS power were 10.6 [9.0–12.6] and 14.1 [10.9–18.2], respectively. MCID values for relative STS power were 0.33 W·kg-1 in women and 0.42 W·kg-1 in men. Conclusions: Relative STS power decreased significantly after the age of 50 years and was negatively and strongly associated with mobility limitations. Our study provides normative data, functionally relevant cut-off points, and MCID values for STS power for their use in daily clinical practice. © 2021 The Authors. Journal of Cachexia, Sarcopenia and Muscle published by John Wiley & Sons Ltd on behalf of Society on Sarcopenia, Cachexia and Wasting Disorders.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The medium-term consequences of a COVID-19 lockdown on lifestyle among Spanish older people with hypertension, pulmonary disease, cardiovascular disease, musculoskeletal disease, depression, and cancer

  • Rodríguez-Gómez, Irene
  • Sánchez-Martín, Coral
  • García-García, Francisco J.
  • García-Esquinas, Esther
  • Miret, Marta
  • Vicente-Rodriguez, Germán
  • Gusi, Narcís
  • Mañas, Asier
  • Carnicero, José A.
  • Gonzalez-Gross, Marcela
  • Ayuso-Mateos, José L.
  • Rodríguez-Artalejo, Fernando
  • Rodríguez-Mañas, Leocadio
  • Ara, Ignacio
OBJECTIVES: This study investigated the associations of chronic diseases with changes in lifestyle and health behaviours in older people following the coronavirus disease 2019 (COVID-19) lockdown in Spain and compared the differences in changes over time. METHODS: 1,092 participants (80.3±5.6 years; 66.5% female) from 2 Spanish cohorts were included. Telephone-based questionnaires were conducted to evaluate lifestyle and health risk behaviours at the end of lockdown and 7 months post-lockdown. Participants were classified as having physician-diagnosed chronic diseases based on self-reported data. Cox proportional models adjusted for major confounders were used. RESULTS: Compared to those without the corresponding chronic diseases, older people with hypertension were less likely to report increased alcohol consumption (hazard ratio [HR], 0.73; 95% confidence interval [CI], 0.55 to 0.99). Pulmonary diseases were associated with lower risks of increased sedentary time (HR, 0.58; 95% CI, 0.39 to 0.86) and worsened sleep quality (HR, 0.56; 95% CI, 0.36 to 0.87), while cardiovascular diseases were associated with a lower risk of decreased sedentary time (HR, 0.58; 95% CI, 0.38 to 0.88). Depression was linked to a higher likelihood of improved diet quality (HR, 1.53; 95% CI, 1.00 to 2.36). Cancer pacients were less likely to have worsened sleep quality (HR, 0.44; 95% CI, 0.22 to 0.89) but more likely to have reduced their frequency of social contact (HR, 2.05; 95% CI, 1.05 to 3.99). CONCLUSIONS: Older people with chronic diseases showed beneficial changes in lifestyle and health risk behaviours after the COVID-19 lockdown. In particular, older people with hypertension, pulmonary disease, and cancer tended to make beneficial lifestyle and health behaviour changes. However, older people with cardiovascular disease and depression engaged in more health risk behaviours.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Design of a computer model for the identification of adolescent swimmers at risk of low BMD

  • Marin-Puyalto, J.
  • Gómez-Cabello, A.
  • Gómez-Brutón, A.
  • Matute-Llorente, Á.
  • Castillo-Bernad, S.
  • Lozano-Berges, G.
  • González-Agüero, A.
  • Casajus, J. A.
  • Vicente-Rodríguez, G.
This paper aims to elaborate a decision tree for the early detection of adolescent swimmers at risk of presenting low bone mineral density (BMD), based on easily measurable fitness and performance variables. The BMD of 78 adolescent swimmers was determined using dual-energy X-ray absorptiometry (DXA) scans at the hip and subtotal body. The participants also underwent physical fitness (muscular strength, speed, and cardiovascular endurance) and swimming performance assessments. A gradient-boosting machine regression tree was built to predict the BMD of the swimmers and to further develop a simpler individual decision tree. The predicted BMD was strongly correlated with the actual BMD values obtained from the DXA (r = 0.960, p < 0.001; root mean squared error = 0.034 g/cm2). According to a simple decision tree (74% classification accuracy), swimmers with a body mass index (BMI) lower than 17 kg/m2 or a handgrip strength inferior to 43 kg with the sum of both arms could be at a higher risk of having a low BMD. Easily measurable fitness variables (BMI and handgrip strength) could be used for the early detection of adolescent swimmers who are at risk of suffering from low BMD.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Design and optimization of small inductors on extra-thin PCB for flexible cooking surfaces

  • Serrano, Javier
  • Lope, Ignacio
  • Acero, Jesús
  • Carretero, Claudio
  • Burdío, José Miguel
  • Alonso, Rafael
The following paper describes the design and optimization method for a small inductor in printed circuit board, which is later used in the implementation of a flexible cooking surface prototype. The method combines analytical developments with finite element analysis (FEA) simulations, providing an important decrease of the computational costs. This is followed by the corresponding calculations in order to minimize conduction and proximity losses in the winding by optimizing the copper volume in the winding and the conductor cross-section dimensions. A parametric analysis is carried out to define the induction system that leads to the optimal efficiency, which, moreover, proves extra-thin PCBs as the most suitable solution. A laboratory prototype of a flexible cooking surface was implemented and tested under real working conditions. The empirical characterization produced good results, which are consistent with the simulations. Additionally, the correct thermal behavior of the arrangement and its adaptability to different pot sizes was verified.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Longitudinal changes in the body composition of non-institutionalized spanish older adults after 8 years of follow-up: the effects of sex, age, and organized physical activity

  • Moradell, Ana
  • Gomez-Cabello, Alba
  • Mañas, Asier
  • Gesteiro, Eva
  • Pérez-Gómez, Jorge
  • González-Gross, Marcela
  • Casajús, Jose Antonio
  • Ara, Ignacio
  • Vicente-Rodríguez, Germán
Aging leads to physiological changes affecting body composition, mediated by lifestyle. However, the effectiveness of organized physical activities (OPAs) in attenuating or delaying these age-related transformations remains an area of limited understanding. The primary objectives of this study were threefold: (I) to comprehensively assess the evolution of body composition in a cohort of Spanish older adults over an 8-year period; (II) to compare this evolution in the different age groups; and (III) to investigate the influence of active engagement in OPAs on these age-related changes. From a sample of 3136 Spanish older adults recruited in 2008, 651 agreed to participate in the 8-year follow-up. Anthropometric and bioelectrical impedance data were included for 507 females (70.3 ± 4.4 years) and 144 males (77.8 ± 4.5 years). Age groups were categorized as follows: youngest (65–69 years), mid (70–74 years), and oldest (≥75 years). The engagement in OPA was recorded before and after the follow-up. A repeated measures ANOVA was performed to evaluate the 8-year changes. Males increased in hip (98.1 ± 9.3 vs. 101.5 ± 10.2 cm) and waist circumferences (101.2 ± 6.6 vs. 103.2 ± 6.1 cm), specifically in the youngest group (p < 0.05). Females decreased in weight (67.6 ± 10.0 vs. 66.6 ± 10.5 kg) and fat mass percentage (39.3 ± 5 vs. 38.8 ± 5.4%) and increased in hip circumference (104.4 ± 9.0 vs. 106.5 ± 9.7 cm); these effects were the most remarkable in the oldest group (all p < 0.05). OPA engagement seemed to slow down fat-free mass loses in males, but not in females (grouped by time, p < 0.05). Body composition changes caused by aging seem to happen earlier in males than in females. Moreover, participating in OPAs does not prevent fat-free mass due to aging.