Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 57
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Libro o Monografía (Book)

Time-Domain Signature Barcodes for Chipless-RFID and Sensing Applications

  • Martín, Ferran|||0000-0002-1494-9167
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Paredes Marco, Ferran|||0000-0002-7252-1169
This book presents an unconventional approach for implementing chipless radiofrequency identification (RFID) systems and related sensors. Contrary to most state-of-the-art chipless-RFID systems, the proposed approach is based on time domain and the tags are read through near field. The book discusses different aspects of these chipless-RFID systems, including tag and reader design, strategies to enhance the data density and capacity, tag programming and erasing, tag implementation in plastic and paper substrates, and synchronous tag reading, among others. A tolerance analysis and validation of the different systems, as well as prospective applications, are also included. The book also offers a comprehensive overview of the state-of-the-art in chipless-RFID technology, including a comparative analysis, which is extended also to chip-based RFID systems. Readers are expected to be familiar with RF/microwave engineering technology. Besides master's and postgraduate students, the book is intended for researchers in the field of radiofrequency identification (RFID) technology, and may be of interest for engineers working in the areas of wireless communications, automatic identification, security, authentication, microwave and wireless sensors, as well as those dealing with internet of things (IoT) and smart systems.
Dipòsit Digital de Documents de la UAB
Publication Libro o Monografía (Book)

Planar Microwave Sensors

  • Martín, Ferran|||0000-0002-1494-9167
  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Su, Lijuan|||0000-0002-4753-9340
Planar Microwave Sensors is an authoritative resource on the subject, discussing the main relevant sensing strategies, working principles, and applications on the basis of the authors’ own experience and background, while also highlighting the most relevant contributions to the topic reported by international research groups. The authors provide an overview of planar microwave sensors grouped by chapters according to their working principle. In each chapter, the working principle is explained in detail and the specific sensor design strategies are discussed, including validation examples at both simulation and experimental level. The most suited applications in each case are also reported. The necessary theory and analysis for sensor design are further provided, with special emphasis on performance improvement (i.e., sensitivity and resolution optimization, dynamic range, etc.). Lastly, the work covers a number of applications, from material characterization to biosensing, including motion control sensors, microfluidic sensors, industrial sensors, and more.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly-sensitive microwave sensors based on open complementary split ring resonators (OCSRRs) for dielectric characterization and solute concentration measurement in liquids

  • Vélez, Paris|||0000-0001-6502-5987
  • Grenier, Katia|||0000-0002-5056-5582
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Dubuc, David
  • Martín, Ferran|||0000-0002-1494-9167
Differential permittivity sensors based on a pair of uncoupled microstrip lines, each one loaded with an open complementary split ring resonator (OCSRR), are proposed in this paper. The sensing principle is based on the measurement of the cross-mode insertion loss, very sensitive to asymmetric loading. Thus, by loading one of the OCSRRs with the reference sample, and the other one with the sample under test (SUT), the difference in the complex permittivity between both samples generates an asymmetry that gives rise to mode conversion. From the measurement of the cross-mode transmission coefficient, the dielectric properties of the SUT can be determined, provided those of the reference sample are well known. It is shown that by adding fluidic channels on top of the OCSRRs, the proposed sensor is useful for the measurement of the complex dielectric constant of liquids, and experimental results in mixtures of ethanol and deionized (DI) water and methanol in DI water, as a function of the ethanol/methanol content, are provided. Due to the high sensitivity of the proposed differential sensor to detect small perturbations (asymmetries), the structure is also of interest for the accurate measurement of solute concentrations in liquid solutions. In this paper, the structure is applied to monitor sodium content in aqueous solutions, and it is found that sodium concentrations as small as 0.25 g/L can be resolved.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Very low-cost 80-Bit chipless-RFID tags inkjet printed on ordinary paper

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Moras Albero, Miquel|||0000-0003-3397-2730
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Núñez, Alba|||0000-0003-3529-7986
  • Ramon, Eloi|||0000-0001-9974-8112
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a time-domain, chipless-RFID system with 80-bit tags inkjet-printed on ordinary DIN A4 paper. The tags, consisting of a linear chain of resonant elements (with as many resonators as the number of identification bits plus header bits), are read sequentially and by proximity (through near-field coupling). To this end, a transmission line, fed by a harmonic (interrogation) signal tuned to the resonance frequency of the tag resonators (or close to it), is used as a reader. Thus, during reader operation, the tag chain is mechanically shifted over the transmission line so that the coupling between the line and the functional resonant elements of the tag chain is favored. Logic states that '1' and '0' are determined by the functionality and non-functionality (resonator detuning), respectively, of the resonant elements of the chain. Through near-field coupling, the transmission coefficient of the line is modulated and, as a result, the output signal is modulated in amplitude (AM), which is the identification code contained in the envelope function. As long as the tags are inkjet-printed on ordinary DIN A4 paper, the cost is minimal. Moreover, such tags can be easily programmed and erased, so that identical tags can be fabricated on a large scale (and programmed at a later stage), further reducing the cost of manufacture. The reported prototype tags, with 80 bits of information plus four header bits, demonstrate the potential of this approach, which is of particular interest to secure paper applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhancing the number of modes in metasurfaced reverberation chambers for field uniformity improvement

  • Sun, Hengyi
  • Gu, Changqing
  • Li, Zhuo
  • Xu, Qian
  • Song, Jiajia
  • Xu, Baijie
  • Dong, Xiaohang
  • Wang, Kuan
  • Martín, Ferran|||0000-0002-1494-9167
The use of metasurfaces to increase the number of modes, lower the operating frequency, and improve the field uniformity in reverberation chambers (RCs) is investigated in this paper. The method used to improve the field uniformity and decrease the resonance frequencies is based on increasing the number of modes by using the concept of subwavelength cavities. The resonance frequencies of a RC with metasurface wall are derived and expressed analytically in terms of macroscopic characteristics. Simulation of the reflection phase of the unit cell is then given as a guideline to choose the required microscopic parameters of the designed metasurface. The mode density in such subwavelength RCs is then obtained using a numerical eigenmode solver. Compared to traditional RCs, a much higher modal density is obtained at low frequencies. The standard deviation of the field uniformity in the test volume of the RC corresponding to different types of metasurface walls is finally compared. It is shown that by increasing the number of modes in the RC at the lower band, the operating frequency decreases and the field uniformity of the RC is improved.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Parametric testing of metasurface stirrers for metasurfaced reverberation chambers

  • Sun, Hengyi
  • Gu, Changqing
  • Li, Zhuo
  • Xu, Qian
  • Wei, Mengmeng
  • Song, Jiajia
  • Xu, Baijie
  • Dong, Xiaohang
  • Wang, Kuan
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, the correlation coefficients and the total scattering cross sections (TSCSs) for different types of metasurfaced stirrers and the traditional metallic stirrer, and the effects on field uniformity when such stirrers are used in reverberation chambers, are analyzed. Three metasurfaced stirrers are considered: A stirrer with two unit cells arranged alternatively (#1), a stirrer with two unit cells arranged in a chessboard-like manner (#2), and a stirrer with two unit cells in random arrangement (#3). From the correlation coefficient and TSCS results obtained in simulations, it follows that metasurfaced stirrer #1 is the best option. Field uniformity analysis of the resulting metasurface reverberation chambers (MRC) equipped with the different stirrers also supports this conclusion.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Differential microfluidic sensors based on dumbbell-shaped defect ground structures in microstrip technology, analysis, optimization, and applications

  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Gil, Marta
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
A microstrip defect ground structure (DGS) based on a pair of dumbbell-shaped slots is used for sensing. The device is a differential sensor consisting of a pair of mirrored lines loaded with a dumbbell-shaped DGS, and the output variable is the cross-mode transmission coefficient. Such a variable is very sensitive to asymmetries in the line pair, e.g., caused by an asymmetric dielectric load in the dumbbell-shaped DGSs. Therefore, the sensor is of special interest for the dielectric characterization of solids and liquids, or for the measurement of variables related to complex permittivity changes. It is shown in this work that by adding fluidic channels on top of the dumbbell-shaped DGSs, the device is useful for liquid characterization, particularly for the measurement of solute concentration in very diluted solutions. A sensitivity analysis useful for sensor design is carried out in this paper.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Chipless-RFID, a review and recent developments

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
In this paper, a review of the state-of-the-art chipless radiofrequency identification (RFID) technology is carried out. This recent technology may provide low cost tags as long as these tags are not equipped with application specific integrated circuits (ASICs). Nevertheless, chipless-RFID presents a series of technological challenges that have been addressed by different research groups in the last decade. One of these challenges is to increase the data storage capacity of tags, in order to be competitive with optical barcodes, or even with chip-based RFID tags. Thus, the main aim of this paper is to properly clarify the advantages and disadvantages of chipless-RFID technology. Moreover, since the coding information is an important aspect in such technology, the di_erent coding techniques, as well as the main figures of merit used to compare di_erent chipless-RFID tags, will be analyzed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Compact coplanar waveguide power splitter with filtering capability based on slow-wave structures

  • Vélez, Paris|||0000-0001-6502-5987
  • Aznar Ballesta, Francisco|||0000-0002-1845-7071
  • Coromina, Jan|||0000-0002-3541-4663
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
A compact coplanar waveguide (CPW) power splitter with filtering capability is presented in this paper. The splitter consists of a pair of 70.71 Ω impedance inverters implemented by means of inductively and capacitively loaded slow-wave structures. Such slow-wave structures efficiently shorten the length of the inverters, thereby providing substantial size reduction to the power splitter. The filtering functionality is due to the Bragg effect, related to periodicity. The proposed splitter, designed to be functional at 1 GHz, exhibits good performance at that frequency, with measured return loss of 20.6 dB and insertion loss of 3.15 dB and 3.23 dB at the output ports. Moreover, the suppression level at the first, second and third harmonic frequency is better than 12.4 dB, 34.6 dB and 24.7 dB, respectively. As compared to the length of the ordinary inverters, the length of the constitutive slow-wave impedance is reduced by a factor of two.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Miniaturised and harmonic-suppressed rat-race couplers based on slow-wave transmission lines

  • Selga Ruiz, Jordi|||0000-0002-1660-500X
  • Coromina, Jan|||0000-0002-3541-4663
  • Vélez, Paris|||0000-0001-6502-5987
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
In this study, a compact rat-race hybrid coupler with harmonic suppression based on slow-wave transmission lines (SW-TLs) is presented. Such artificial lines are implemented by periodic loading a host microstrip line with series meandered inductors and shunt patch capacitors. The presence of both loading elements has a twofold effect, i.e. phase velocity reduction (due to the enhancement of the effective inductance and capacitance of the periodic line), and the generation of a controllable stopband in the frequency response (due to the Bragg effect, inherent to periodicity). It is shown that by designing the unit cell of the periodic line with an electrical length of 45°, at least the first five harmonic bands of the rat-race coupler are efficiently suppressed, keeping the band of interest unaltered. Moreover, 79% size reduction, as compared to the ordinary coupler, is achieved in the reported SW-TL-based prototype.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Reactively-loaded non-periodic slow-wave artificial transmission lines for stop band bandwidth enhancement, application to power splitters

  • Coromina, Jan|||0000-0002-3541-4663
  • Vélez, Paris|||0000-0001-6502-5987
  • Bonache, Jordi|||0000-0002-7225-5737
  • Aznar Ballesta, Francisco|||0000-0002-1845-7071
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents slow-wave transmission lines based on non-periodic reactive loading. Specifically, the loading elements are stepped impedance shunt stubs (SISS). By sacrificing periodicity using SISS tuned to different frequencies, multiple transmission zeros above the pass band arise, and the rejection level and bandwidth of the stop band is improved as compared with those of periodic structures. Through a proper design, it is possible to achieve compact lines, simultaneously providing the required electrical length and characteristic impedance at the design frequency (dictated by specifications), and efficiently filtering the response at higher frequencies. These lines are applied to the design of a compact power splitter with filtering capability in this work. The length of the splitter, based on a 35.35 Ω impedance inverter, is reduced by a factor of roughly two. Moreover, harmonic suppression better than 20 dB up to the fourth harmonic is achieved.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Differential-mode to common-mode conversion detector based on rat-race hybrid couplers, analysis and application to differential sensors and comparators

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

An analytical method to implement high-sensitivity transmission line differential sensors for dielectric constant measurements

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
A simple analytical method useful to optimize the sensitivity in differential sensors based on a pair of meandered microstrip lines is presented in this paper. Sensing is based on the phase difference of the transmission coefficients of both lines, when such lines are asymmetrically loaded. The analysis provides the combination of operating frequency and line length (the main design parameters) that are necessary to obtain the maximum possible differential phase (±180°) for a given level of the differential dielectric constant (input dynamic range). The proposed sensor is useful to detect tiny defects of a sample under test (SUT) as compared to a reference (REF) sample. It can also be applied to the measurement of the complex dielectric constant of the SUT, where the real part is inferred from the differential phase, whereas the imaginary part, or the loss tangent, is derived from the modulus of the transmission coefficient of the line loaded with the SUT. It is experimentally demonstrated that the proposed device is able to detect the presence of few and small (purposely generated) defects in a commercial microwave substrate, as well as subtle variations in their density, pointing out the high achieved sensor sensitivity. Sensor validation is also carried out by determining the dielectric constant and loss tangent of commercial microwave substrates.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Signal balancing in unbalanced transmission lines

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Martín, Ferran|||0000-0002-1494-9167
Balanced lines operating as transmission line interconnects are subjected to differential-mode to common-mode conversion (and vice versa) in situations where symmetry imbalances (e.g., caused by line bends) are unavoidable. In this paper, a technique to compensate for such symmetry imbalances, providing pure differential-mode signals at the differential output port of the line, is presented. Such technique uses a rat-race balun (to generate the differential-mode signal) with the isolated port conveniently loaded, and it is based on the modification of the characteristic impedance of one of the unbalanced lines. A detailed analysis that justifies this compensation technique (valid for any arbitrary four-port network) and provides the design equations is presented. The approach is validated through simulation and experiment, by demonstrating that common-mode signals are not transmitted to the differential output port of a bended (i.e., unbalanced) line pair.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Time-domain-signature chipless RFID tags, near-field chipless-RFID systems with high data capacity

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Double-stub loaded microstrip line reader for very high data density microwave encoders

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
Compact and high-data density microwave encoders useful for motion control and near-field chipless radio frequency identification (chipless-RFID) applications are proposed in this paper. The encoders are chains of metallic strips etched on a dielectric substrate. The reader consists of a microstrip line loaded with a pair of identical open-ended folded stubs located at different positions and oriented face-to-face by their extremes. By displacing the encoder over the extremes of the stubs, interstub coupling arises when a strip is located on top of the stubs, thereby generating two transmission zeros (rather than one) in the frequency response of the line. Thus, the presence of a strip on top of the face-to-face stubs produces a variation in the transmission coefficient of the line, which in turn can be detected by feeding the line with a harmonic signal, conveniently tuned. Encoder motion generates an amplitude modulated (AM) signal at the output port of the line with peaks, or dips, separated by a time distance dictated by the relative velocity between the reader and the encoder. Moreover, by making certain strips of the chain inoperative (e.g., by cutting them), it is possible to encode information that can be read as the absence (logic state "1") or presence (logic state "0") of peaks, or dips, at predefined positions in the output AM signal of the reader line. Since short strips suffice to generate interstub coupling, unprecedented data density per surface (DPS = 26.04 bit/cm 2 ) is obtained, as revealed by the implementation of 6.4 mm × 60 mm 100-bit encoders.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High-density microwave encoders for motion control and near-field chipless-RFID

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Muela, Francisco Javier
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
A novel microwave system for measuring linear displacements and velocities with sub-millimeter resolution and for the implementation of near-field chipless radiofrequency identification (chipless-RFID) systems with very high data capacity is presented. The system is based on a reader, consisting of a half-wavelength straight resonator coupled (through capacitor gaps) to a pair of access lines, and a microwave encoder, in relative motion to the reader and consisting of a linear chain of strips orthogonally oriented to the chain axis. By displacing the encoder over the half-wavelength resonator of the reader, with the encoder strips parallel oriented to the reader axis, the relative velocity and position between the encoder and the reader can be inferred. For that purpose, the reader is fed by a harmonic signal tuned to the resonance frequency that results when an encoder strip is perfectly aligned with the reader. The encoder motion amplitude modulates the feeding signal at the output port, and both the position and the velocity are measured from the peaks, or dips, of the resulting envelope function. Moreover, by making certain strips inoperative, the system can be used for coding purposes. Due to the small period of the encoder (0.6 mm), a high per-unit-length data density in these near-field chipless-RFID tags (i.e., 16.66 bits/cm) is achieved. To illustrate the functionality and potential of the approach, 100-bit chipless-RFID tags with various ID codes are implemented and read.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

3D-printed all-dielectric electromagnetic encoders with synchronous reading for measuring displacements and velocities

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, 3D-printed electromagnetic (or microwave) encoders with synchronous reading based on permittivity contrast, and devoted to the measurement of displacements and velocities, are reported for the first time. The considered encoders are based on two chains of linearly shaped apertures made on a 3D-printed high-permittivity dielectric material. One such aperture chain contains the identification (ID) code, whereas the other chain provides the clock signal. Synchronous reading is necessary in order to determine the absolute position if the velocity between the encoder and the sensitive part of the reader is not constant. Such absolute position can be determined as long as the whole encoder is encoded with the so-called de Bruijn sequence. For encoder reading, a splitter/combiner structure with each branch loaded with a series gap and a slot resonator (each one tuned to a different frequency) is considered. Such a structure is able to detect the presence of the apertures when the encoder is displaced, at short distance, over the slots. Thus, by injecting two harmonic signals, conveniently tuned, at the input port of the splitter/combiner structure, two amplitude modulated (AM) signals are generated by tag motion at the output port of the sensitive part of the reader. One of the AM envelope functions provides the absolute position, whereas the other one provides the clock signal and the velocity of the encoder. These synchronous 3D-printed all-dielectric encoders based on permittivity contrast are a good alternative to microwave encoders based on metallic inclusions in those applications where low cost as well as major robustness against mechanical wearing and aging effects are the main concerns.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Branch line couplers with small size and harmonic suppression based on non-periodic step impedance shunt stub (SISS) loaded lines

  • Coromina, Jan|||0000-0002-3541-4663
  • Vélez, Paris|||0000-0001-6502-5987
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents branch line couplers with compact size and harmonic suppression based on non-periodic reactively loaded artificial lines. The reactive loading elements of the lines are step impedance shunt stubs (SISSs). Such elements provide transmission zeros, which are useful to efficiently suppressing the harmonic content of the device. Moreover, by virtue of reactive loading, the reported artificial lines exhibit a slow wave effect of interest for device miniaturization. The combination of size, harmonic suppression efficiency, and design simplicity (with a clear design methodology) is of interest within the framework of artificial transmission lines and their application to the optimization of microwave passive components.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Planar microwave resonant sensors, a review and recent developments

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
Microwave sensors based on electrically small planar resonant elements are reviewed in this paper. By virtue of the high sensitivity of such resonators to the properties of their surrounding medium, particularly the dielectric constant and the loss factor, these sensors are of special interest (although not exclusive) for dielectric characterization of solids and liquids, and for the measurement of material composition. Several sensing strategies are presented, with special emphasis on differential-mode sensors. The main advantages and limitations of such techniques are discussed, and several prototype examples are reported, mainly including sensors for measuring the dielectric properties of solids, and sensors based on microfluidics (useful for liquid characterization and liquid composition). The proposed sensors have high potential for application in real scenarios (including industrial processes and characterization of biosamples).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly Sensitive Reflective-Mode Defect Detectors and Dielectric Constant Sensors Based on Open-Ended Stepped-Impedance Transmission Lines

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, reflective-mode phase-variation sensors based on open-ended stepped-impedance transmission lines with optimized sensitivity for their use as defect detectors and dielectric constant sensors are reported. The sensitive part of the sensors consists of either a 90° high-impedance or a 180° low-impedance open-ended sensing line. To optimize the sensitivity, such a sensing line is cascaded to a 90° transmission line section with either low or high characteristic impedance, resulting in a stepped-impedance transmission line configuration. For validation purposes, two different sensors are designed and fabricated. One of the sensors is implemented by means of a 90° high impedance (85 Ω) open-ended sensing line cascaded to a 90° low impedance (15 Ω) transmission line section. The other sensor consists of a 180° 15-Ω open-ended sensing line cascaded to a 90° 85-Ω line. Sensitivity optimization for the measurement of dielectric constants in the vicinity of that corresponding to the Rogers RO4003C substrate (i.e., with dielectric constant 3.55) is carried out. The functionality as a defect detector is demonstrated by measuring the phase-variation in samples consisting of the uncoated Rogers RO4003C substrate (the reference sample) with arrays of holes of different densities.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Planar Phase-Variation Microwave Sensors for Material Characterization, a review and comparison of various approaches

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Coromina, Jan|||0000-0002-3541-4663
  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Martín, Ferran|||0000-0002-1494-9167
Planar phase-variation microwave sensors have attracted increasing interest in recent years since they combine the advantages of planar technology (including low cost, low profile, and sensor integration with the associated circuitry for post-processing and communication purposes, among others) and the possibility of operation at a single frequency (thereby reducing the costs of the associated electronics). This paper reviews and compares three different strategies for sensitivity improvement in such phase-variation sensors (devoted to material characterization). The considered approaches include line elongation (through meandering), dispersion engineering (by considering slow-wave artificial transmission lines), and reflective-mode sensors based on step-impedance open-ended lines. It is shown that unprecedented sensitivities compatible with small sensing regions are achievable with the latter approach.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

DC characterization and fast small-signal parameter extraction of organic thin film transistors with different geometries

  • Nafria, Montserrat|||0000-0002-9549-2890
  • Crespo-Yepes, A.|||0000-0003-4618-651X
  • Rodriguez, R.|||0000-0002-4565-6703
  • Arnal Rus, August|||0000-0002-3425-1057
  • Ramon, Eloi|||0000-0001-9974-8112
  • Terés Terés, Lluís|||0000-0002-9263-411X
Organic Devices offer low-cost manufacturing and better flexibility, sustainability and solution-processability than their Si-based MOS counterparts, which make them suitable for new applications where those characteristics are an advantage. However, organic device performance is still far from that provided by CMOS technology and many issues are still unclear. In this work, a performance comparison is made between Interdigitated and Corbino geometries of Organic Thin Film Transistors (OTFT), with different areas but fabricated with identical stack materials and techniques. To this end, I-V characteristics and C-V curves of the OTFTs were measured and a Common-Source circuit was proposed and implemented for extracting relevant electrical parameters of the devices, through a standard small signal analysis. The parameter extraction methodology in the frequency domain proposed allows rapid testing of the device/circuit performance of this technology, which for the first time is applied to organic devices. Results show that despite the large voltages, organic transistors exhibit similar channel dimension dependencies to MOS devices and can be also described by the same small signal model.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

3d-printed quasi-absolute electromagnetic encoders for chipless-rfid and motion control applications

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents electromagnetic encoders useful for chipless-RFID and motion control applications. The encoders consist in a pair of linear chains of rectangular apertures implemented by means of 3D printing. One of these chains is periodic and acts as a clock, whereas the other chain contains an identification (ID) code. With these two aperture chains, the ID code can be synchronously read, so that the relative velocity between the tag and the reader is irrelevant. Additionally, it is shown in the paper that by properly designing the reader, it is possible to determine the motion direction. The sensitive part of the reader is a microstrip line loaded with three complementary split ring resonators (CSRRs) etched in the ground plane and fed by three harmonic signals. By encoder motion, the characteristics of the local medium surrounding the CSRRs are modified, and the harmonic signals are amplitude modulated (AM) at the output port of the line, thereby providing the clock signal (which gives the encoder velocity), the ID code (providing also the quasi-absolute position) and the direction of motion. A fabricated prototype encoder is characterized by reading it with a dedicated reader.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Parametric analysis of the edge capacitance of uniform slots and application to frequency-variation permittivity sensors

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Martel Villagrán, Jesús|||0000-0002-2705-5912
  • Vélez, Paris|||0000-0001-6502-5987
  • Medina, Francisco|||0000-0002-9947-506X
  • Su, Lijuan|||0000-0002-4753-9340
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a parametric analysis relative to the effects of the dielectric constant of the substrate, substrate thickness and slot width on the edge capacitance of a slot-based resonator. The interest is to find the conditions (ranges of the previously cited parameters) compatible with the presence of a quasi-magnetic wall in the plane of the slot (or plane of the metallization). If such magnetic wall is present (or roughly present), the electric field in the plane of the slot is tangential (or quasi-tangential) to it and the edge capacitance can be considered to be the parallel combination of the capacitances at both sides of the slot. Moreover, variations in one of such capacitances, e.g., caused by a change in the material on top of the slot, or by a modification of the dielectric constant of the substrate do not affect the opposite capacitance. Under the magnetic wall approximation, the capacitance of certain electrically small slot-based resonators can be easily linked to the dielectric constant of the material present on top of it. The consequence is that such resonators can be used as sensing elements in a permittivity sensor and the dielectric constant of the so-called material under test (MUT) can be determined from the measured resonance frequency and a simple analytical expression. In this paper, the results of this parametric analysis are validated by considering several sensing structures based on dumbbell defect ground structure (DB-DGS) resonators of different dimensions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Position Sensors for Industrial Applications Based on Electromagnetic Encoders

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Martín, Ferran|||0000-0002-1494-9167
Optical and magnetic linear/rotary encoders are well-known systems traditionally used in industry for the accurate measurement of linear/angular displacements and velocities. Recently, a different approach for the implementation of linear/rotary encoders has been proposed. Such an approach uses electromagnetic signals, and the working principle of these electromagnetic encoders is very similar to the one of optical encoders, i.e., pulse counting. Specifically, a transmission line based structure fed by a harmonic signal tuned to a certain frequency, the stator, is perturbed by encoder motion. Such encoder consists in a linear or circular chain (or chains) of inclusions (metallic, dielectric, or apertures) on a dielectric substrate, rigid or flexible, and made of different materials, including plastics, organic materials, rubber, etc. The harmonic signal is amplitude modulated by the encoder chain, and the envelope function contains the information relative to the position and velocity. The paper mainly focuses on linear encoders based on metallic and dielectric inclusions. Moreover, it is shown that synchronous electromagnetic encoders, able to provide the quasi-absolute position (plus the velocity and direction of motion in some cases), can be implemented. Several prototype examples are reviewed in the paper, including encoders implemented by means of additive process, such as 3D printed and screen-printed encoders.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Discussion and analysis of dumbbell defect-ground-structure (DB-DGS) resonators for sensing applications from a circuit theory perspective

  • Su, Lijuan|||0000-0002-4753-9340
  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Martín, Ferran|||0000-0002-1494-9167
Microstrip transmission lines loaded with dumbbell defect-ground-structure (DB-DGS) resonators transversally oriented have been exhaustively used in microwave circuits and sensors. Typically, these structures have been modelled by means of a parallel LC resonant tank series connected to the host line. However, the inductance and capacitance of such model do not have a physical meaning, since this model is inferred by transformation of a more realistic model, where the DB-DGS resonator, described by means of a resonant tank with inductance and capacitance related to the geometry of the DB-DGS, is magnetically coupled to the host line. From parameter extraction, the circuit parameters of both models are obtained by considering the DB-DGS covered with semi-infinite materials with different dielectric constant. The extracted parameters are coherent and re-veal that the general assumption of considering the simple LC resonant tank series-connected to the line to describe the DB-DGS-loaded line is reasonable with some caution. The implications on the sensitivity, when the structure is devoted to operating as a permittivity sensor, are discussed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A Reflective-Mode Phase-Variation Displacement Sensor

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, a displacement sensor based on an open-ended step-impedance transmission line is reported. The sensor operates in reflection, and the output variable is the phase of the reflection coefficient. The static part of the sensor is the step-impedance transmission line, where the open-ended line section is the sensitive part (sensing line). The movable part is a dielectric slab, e.g., an uncladded microwave substrate. When such slab, located on top of the sensing line, is in relative motion to the line, in the direction of the line axis, the portion of the sensing line covered by the slab varies, and this results in a change in the phase of the reflection coefficient of the line. The step impedance discontinuity contributes to optimize the sensor sensitivity, the key parameter. A detailed analysis providing the design guidelines is carried out and used to design a prototype displacement sensor. The characterization of the fabricated device points out the potential of the approach to implement highly sensitive displacement sensors. The sensor is a one-port device and operates at a single frequency.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

On the Modeling of Microstrip Lines Loaded With Dumbbell Defect-Ground-Structure (DB-DGS) and Folded DB-DGS Resonators

  • Su, Lijuan|||0000-0002-4753-9340
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Martel Villagrán, Jesús|||0000-0002-2705-5912
  • Medina, Francisco|||0000-0002-9947-506X
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a lumped-element equivalent circuit model of microstrip lines loaded with dumbbell defect-ground-structure (DB-DGS) resonators, etched in the ground plane. The model is valid for ordinary (i.e., unfolded) DB-DGSs, as well as for folded DB-DGSs with an arbitrary aperture angle and relative orientation between the line and the resonator. It is shown that in folded, or partially folded, DB-DGS resonators both magnetic and electric coupling between the line and the resonator should be considered, except for a particular DB-DGS orientation, namely, the one where the symmetry plane of the particle (a magnetic wall) is orthogonal to the line axis. In this case, the particle is exclusively excited by the electric field generated by the line. It is also shown that the circuit model of a microstrip line loaded with an unfolded DB-DGS resonator transversally oriented to the line can be derived from the general model by considering the effects of opening the particle, i.e., a reduction of the electric coupling. In the extreme situation where the DB-DGS is completely opened (unfolded), the electric coupling vanishes, and the particle is exclusively driven by the magnetic field generated by the line. This effect is taken into account in the model by considering that the capacitance between the line and the inner metallic region of the folded, or partially folded, DB-DGS depends on the aperture angle of the particle, and it is null when the particle is unfolded. The models are validated by parameter extraction and comparison of the circuit responses with the responses inferred by electromagnetic simulation and measurement.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Programmable Organic Chipless RFID Tags Inkjet Printed on Paper Substrates

  • Moras Albero, Miquel|||0000-0003-3397-2730
  • Martinez Domingo, Carme|||0000-0002-1897-5362
  • Escude Pujol, Roger|||0000-0002-0780-8104
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Terés Terés, Lluís|||0000-0002-9263-411X
  • Martín, Ferran|||0000-0002-1494-9167
  • Ramon, Eloi|||0000-0001-9974-8112
In this paper, an organic, fully recyclable and eco-friendly 20-bit inkjet-printed chipless RFID tag is presented. The tag operates in the near field and is implemented by means of chains of resonant elements. The characterization and manufacturing process of the tag, printed with a few layers of a commercial organic ink on conventional paper substrate (DIN A4), are presented, and tag functionality is demonstrated by reading it by means of a custom-designed reader. The tags are read by proximity (through the near field), by displacing them over a resonator-loaded transmission line, and each resonant element (bit) of the tag is interrogated by a harmonic signal tuned to the resonance frequency. The coupling between the reader line and the resonant elements of the tag produce and amplitude modulated (AM) signal containing the identification (ID) code of the tag.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly Sensitive Reflective-Mode Phase-Variation Permittivity Sensor Based on a Coplanar Waveguide Terminated With an Open Complementary Split Ring Resonator (OCSRR)

  • Su, Lijuan|||0000-0002-4753-9340
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a one-port reflective-mode phase-variation microwave sensor consisting of a coplanar waveguide (CPW) transmission line terminated with a grounded open complementary split ring resonator (OCSRR). The sensor is useful for measuring the dielectric constant of the so-called material under test (MUT), which should be placed in contact with the OCSRR, the sensitive element. The output variable is the phase of the reflection coefficient. Design guidelines for the implementation of highly sensitive sensors are derived in the paper, and validated through simulation and experiment. As compared to other reflective mode phase-variation sensors based on open-ended sensing lines, the designed and fabricated devices exhibit a very small sensitive region by virtue of the use of an electrically small resonant element, the OCSRR. The relevant figure of merit, defined as the ratio between the maximum sensitivity and the size of the sensing area (expressed in terms of the squared wavelength), is as high as FoM = 5643°/λ 2 in one of the reported prototypes. Moreover, the paper analyzes the effects of losses. From this study, it is concluded that MUT losses do not significantly affect the output variable, provided losses are small. It is also demonstrated that the sensor is useful to estimate the loss tangent of the considered MUT samples.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electromagnetic Encoders Screen-Printed on Rubber Belts for Absolute Measurement of Position and Velocity

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Moya Lara, Ana|||0000-0001-6793-9133
  • Berenguel-Alonso, Miguel|||0000-0002-3759-3634
  • Gonzalez, David|||0000-0003-4696-3606
  • Bruguera, Pep|||0000-0002-2435-6242
  • Delgado Simao, Claudia|||0000-0003-3837-9311
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents, for the first time, an absolute linear electromagnetic encoder consisting of a rubber belt with two chains of screen-printed metallic inclusions (rectangular patches). The position, velocity, and direction of the belt (the moving part) is determined by detecting the inclusions when they cross the stator (the static part). The stator is a microstrip line loaded with three complementary split ring resonators (CSRRs), resonant elements exhibiting a resonance frequency perturbed by the presence of inclusions on top of them (contactless). The line is fed by three harmonic signals tuned to the resonance frequencies of the CSRRs. Such signals are generated by a voltage-controlled oscillator (VCO) managed by a microcontroller. The sensed data are retrieved from the pulses contained in the envelope functions of the respective amplitude modulated (AM) signals (caused by the belt motion) generated at the output port of the line. One of the signals provides the absolute belt position, determined by one of the chains, the encoded one. The information relative to the velocity and motion direction is contained in the other AM signals generated by the motion of the other chain, periodic, and thereby, uncoded. The spatial resolution of the system, a figure of merit, is 4 mm. Special emphasis is devoted to the printing process of the belt inclusions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High data density near-field chipless-RFID tags with synchronous reading

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Escude Pujol, Roger|||0000-0002-0780-8104
  • Ramon, Eloi|||0000-0001-9974-8112
  • Martín, Ferran|||0000-0002-1494-9167
Near-field chipless-RFID tags with high data density and synchronous reading capability are presented and experimentally validated in this paper. The tags consist of a chain of rectangular patches etched or printed at predefined positions on a dielectric substrate, including rigid or flexible (i.e., plastic or even paper) substrates. Patch dimensions determine the binary state, where the larger and smaller patches are associated with the logic '1' and '0' states, respectively, or vice versa. For sequentially and synchronously reading the bits, a sensitive element able to determine the presence of the patches and their size by proximity (through near field using microwaves) is considered. Such element is a microstrip line loaded with a pair of rectangular complementary split ring resonators (CSRRs), one etched inside the other in the ground plane. When the tag chain is displaced at short distance over the CSRRs, the larger patches modify the resonance frequency of both sensing CSRRs, whereas the lower patches do only alter the resonance frequency of the smaller CSRR. Consequently, the ID code is contained in the patch dimensions, and the presence of a patch (regardless of its size) determines the reading times (clock signal), necessary for synchronous reading. Tag reading in this system proceeds by feeding the CSRR-loaded line (reader) with a pair of harmonic signals tuned to the resonance frequencies of the bare CSRRs. Both signals are amplitude modulated (AM) at the output port as consequence of tag motion, and the respective envelope functions contain both the clock signal and the tag ID code. The ID codes of several 16-bit tags, implemented on different substrates (microwave substrate, plastic and paper) and exhibiting a per unit length density of 1.67 bit/cm, have been inferred with the dedicated reader for validation purposes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Microfluidic reflective-mode differential sensor based on open split ring resonators (OSRRs)

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
This paper proposes a differential sensor based on a pair of open split ring resonators (OSRR) operating in reflection. The output signal is thus the differential reflection coefficient of both resonators, intimately related to their dielectric loading. Thus, for identical loads in both sensing resonators, the individual reflection coefficients are equal, thereby providing an ideally null output signal. By contrast, when unequal dielectric loads truncate the symmetry, the reflection coefficients are different, resulting in a differential output signal related to the level of asymmetry. In order to ease the measurement of the output signal, a rat-race hybrid coupler is used. The OSRR sensing loads are connected to the coupled ports of the hybrid coupler, whereas the input signal is injected to the Δ-port, and the output signal is collected at the isolated port (Σ-port). By this means, the output signal, i.e. the differential reflection coefficient between both sensing loads, is obtained from the transmission coefficient of a simple two-port structure. For experimental validation purposes, the sensor is applied to the measurement of isopropanol content in aqueous solutions, and for that purpose, the sensitive regions are equipped with microfluidic channels.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

On the Sensitivity of Reflective-Mode Phase-Variation Sensors Based on Open-Ended Stepped-Impedance Transmission Lines: Theoretical Analysis and Experimental Validation

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Martín, Ferran|||0000-0002-1494-9167
This article presents an exhaustive study of the sensitivity in reflective-mode phase-variation sensors based on an open-ended transmission line with a step-impedance discontinuity. Such discontinuity delimits the sensing region (which extends up to the open end of the so-called sensing line), from the transmission line section connected to the input port (design line), which is used to enhance the sensitivity. The theoretical analysis provides the design guidelines to achieve a sensor with high sensitivity compared with the one based on an ordinary (uniform) line with a similar length. In particular, it is shown that for sensitivity optimization, the electrical length of the design line must be set to 90° (or an odd multiple), whereas either a 90° (or an odd multiple) or a 180° (or an even or odd multiple) sensing line can be alternatively used in order to maximize the sensitivity. It is shown that the impedance contrast, defined as the ratio between the characteristic impedances of the design and sensing line, is a key parameter for sensitivity enhancement, and it must be as low or as high as possible for the 90° or 180° sensing lines, respectively. For validation purposes, two prototype devices (one with a 90° and the other one with a 180° sensing line) have been designed and fabricated following the design guidelines. Such devices have been tested by loading the sensing region with several materials with different dielectric constants. Compared with the ordinary line-based sensors, it is found that the maximum sensitivity is enhanced by a factor of 19.7 and 11.4 in the phase-variation sensor based on a 90° and 180° sensing line, respectively. Finally, the sensor concept is generalized to a multisection step-impedance transmission line as a means of further increasing the sensitivity, and a prototype device exhibiting 528.7° maximum sensitivity is implemented.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Differential Sensing Based on Quasi-Microstrip Mode to Slot-Mode Conversion

  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Martín, Ferran|||0000-0002-1494-9167
In this letter, a differential sensor and comparator based on a mode conversion detector implemented by means of a slotline resonator is proposed for the first time. The sensor divides the input signal between two identical sensing elements, a pair of microstrip lines loaded with complementary split-ring resonators (CSRRs). Such CSRRs are symmetrically etched in the ground plane at both sides of the slotline. Therefore, by truncating symmetry, e.g., by loading one of the CSRRs with the reference (REF) sample and the other one with the sample under test (SUT), the slot mode is generated in the slotline resonator. The signal level associated with this mode, which can be inferred by means of a slotline/microstrip transition, depends on the level of asymmetry generated by CSRR loading. Consequently, the proposed structure is useful for differential sensing, where a single input and output port suffices to excite the sensor and to measure the output variable, the magnitude of the transmission coefficient.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Single-frequency amplitude-modulation sensor for dielectric characterization of solids and microfluidics

  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Ebrahimi, Amir|||0000-0002-1787-2230
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Scott, James
  • Ghorbani, Kamran|||0000-0001-8767-0207
  • Martín, Ferran|||0000-0002-1494-9167
A microfluidic sensor based on a microstrip line loaded with a composite resonator is reported in this paper. The composite resonator combines a shunt connected step impedance resonator (SIR) and a complementary split ring resonator CSRR) etched in the ground plane. By etching the CSRR beneath the patch of the SIR, the composite CSRR-loaded SIR resonator exhibits two transmission zeros and a pole in between. The operating principle of the sensor is the variation of the transmission coefficient at the pole frequency of the bare resonator, when a material or liquid under test (LUT) is in contact with the CSRR (the sensitive element). By designing the CSRR-loaded SIR resonator with closely spaced pole and transmission zeros, highly sensitive sensors are obtained. Despite the fact that the proposed sensor can also operate as a frequency variation sensor, using it as a single-frequency sensor based on the variation of the transmission coefficient (caused by the LUT) at a specific frequency reduces sensor costs. The reason is that a harmonic signal injected to the input port of the microstrip-based sensor plus a simple amplitude modulation (AM) detector (connected to the output port) suffices for measuring purposes. The proposed microfluidic sensor is applied to the characterization of volume fraction of solutions of isopropanol in deionized (DI) water. The sensor is able to resolve volume fractions as small as 5%, and the maximum measured sensitivity is as good as 4 mV/%.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Characterization of electrolyte content in urine samples through a differential microfluidic sensor based on dumbbell-shaped defected ground structures

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Gil Barba, Marta|||0000-0002-1106-5059
  • José Cunilleras, Eduard|||0000-0002-4536-7717
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, a differential microfluidic sensor and comparator based on a pair of microstrip lines loaded with dumbbell-shaped defected ground structure resonators is applied to the characterization of electrolyte concentration in samples of horse urine. Since variations in the total electrolyte content in urine may be indicative of certain pathologies, the interest is to use the device as a comparator, in order to determine changes in the electrolyte concentration as compared to a reference level. To validate the approach, we have made differential measurements of a set of urine samples with different electrolyte concentrations (which have been previously obtained by means of electrochemical methods). The obtained results correlate with the nominal electrolyte concentrations of the samples, thereby pointing out the potential of the approach as a low-cost pre-screening method (or complementary diagnosis system) to detect potential pathologies or diseases in horses and other animals.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

3-D-Printed High Data-Density Electromagnetic Encoders Based on Permittivity Contrast for Motion Control and Chipless-RFID

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
The 3-D-printed electromagnetic encoders based on permittivity contrast are presented and discussed in this article. The encoders, implemented using exclusively dielectric materials, are based on linear chains of dielectric inclusions. Two types of encoders are considered: 1) those where the inclusions are simple apertures made on a 3-D-printed dielectric plate (or substrate) and 2) those with inclusions made of high dielectric constant material 3-D-printed on a dielectric substrate (also 3-D-printed). In both cases, encoding is achieved by varying the dielectric constant of the substrate at predefined positions by means of the inclusions. For encoder reading, a microstrip line loaded with a slot resonator (etched in the ground plane) and a series gap is proposed. Such structure is very sensitive to short range dielectric constant variations, being able to detect the presence or absence of closely spaced inclusions when the encoder is displaced on top of the sensitive part of the reader, the slot resonator. For that purpose, the reader line is fed by a harmonic signal conveniently tuned, so that an amplitude-modulated (AM) signal containing the identification (ID) code is generated at the output port of the line. The proposed reader/encoder system is useful for motion control applications (linear displacement and velocity sensors) and for near-field chipless-radio frequency ID (RFID). Lower cost and major robustness against mechanical wearing are potential advantages of these encoders over other electromagnetic encoders based on a similar principle but based on metallic inclusions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly sensitive defect detectors and comparators exploiting port imbalance in rat-race couplers loaded with step-impedance open-ended transmission lines

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synchronism and direction detection in high-resolution/high-density electromagnetic encoders

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
Recently, electromagnetic encoders with synchronous reading and direction detection capability have been reported. Such structures are useful for the implementation of (i) displacement/velocity sensors and (ii) chipless-RFID systems based on near-field coupling and sequential bit reading. In the latter, synchronous reading and motion direction detection are a need in order to avoid false readings of the identification (ID) code, if the relative velocity between the reader and the encoder is not constant, and to read the correct ID code (rather than the inverse one), respectively. On the other hand, synchronous reading and motion direction detection, are essential to determine the encoder direction in displacement/velocity sensors, as well as to provide the absolute position of the encoder, provided that the whole encoder is encoded with the Bruijn sequence. In this paper, synchronous reading and direction detection in high-resolution/high-density electromagnetic encoders based on chains of linearly-shaped metallic inclusions are reported. To this end, it is necessary to add two chains of metallic inclusions to the one containing the ID code. In the reader side, three harmonic signals are necessary in order to generate the clock signals and to obtain the ID code. The reader consists of a microstrip line loaded with three pairs of open-ended folded stubs positioned face-to-face by their extremes. By displacing the encoder chains over the extreme of the stubs, at short distance, stub coupling is enhanced when a metallic inclusion lies on top of the stubs, and the frequency response of the reader is shifted towards lower frequencies. Thus, by injecting three (properly tuned) harmonic signals at the input port of the microstrip transmission line, three amplitude modulated (AM) signals are generated by tag motion at the output port of such transmission line, and the envelope functions contain the velocity, the ID code and the absolute position. The reported reader/encoder system exhibits superior space resolution and information density as compared to other similar systems based on synchronous reading.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Embroidered textile frequency-splitting sensor based on stepped-impedance resonators

  • Vélez, Paris|||0000-0001-6502-5987
  • Martín, Ferran|||0000-0002-1494-9167
  • Fernández-García, Raúl|||0000-0002-4030-7256
  • Gil, Ignacio|||0000-0002-7175-5756
This paper presents an embroidered textile frequency-splitting microwave sensor based on a pair of identical stepped-impedance resonators (SIRs) loading a microstrip transmission line. The sensor is implemented by means of conductive threads. The sensing region of the proposed structure is the capacitive square patch of one of the SIRs. If such region is kept unaltered, the structure is symmetric, and the frequency response (transmission coefficient) exhibits a single transmission zero. However, if symmetry is broken (e.g., through liquid absorption in the sensing region), the frequency response of the proposed sensor exhibits two transmission zeros (frequency splitting). The difference (in frequency and magnitude) between such zeros (or notches) is intimately related to the dielectric properties of the absorbed liquids to be sensed //μl/μl.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhancing the Per-Unit-Length Data Density in Near-Field Chipless-RFID Systems With Sequential Bit Reading

  • Havlíček, Jaroslav|||0000-0001-5644-715X
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
In this letter, a novel near-field chipless-Radio Frequency Identification (RFID) system with sequential bit reading is reported. The main novelty concerns the tags, implemented by means of straight half-wavelength resonators separated by a small distance and forming a linear chain in the direction orthogonal to their axis. By this means, the number of resonant elements (or bits) per unit length of the tag is significantly increased, as compared to the previous implementations, with the result of very competitive tags in terms of data density. The active part of the reader is a microstrip line loaded with a shunt stub. Through a proper design, it is possible to achieve a significant excursion of the transmission coefficient when the stub is either loaded or unloaded with a functional resonant element of the tag. Consequently, by tag motion over the reader (stub), it is possible to infer the Identification (ID) code by simply injecting a harmonic signal to the input port of the stub-loaded line (the ID code is contained in the amplitude modulated, signal at the output port). This system has been validated by considering 100 b tags exhibiting a surface data density of 4.9 b/cm 2 . However, the relevant parameter is the data density per unit length, as high as 16.7 b/cm, i.e., much larger than previous values reported in the literature in similar chipless-RFID systems.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Frequency-variation sensors for permittivity measurements based on dumbbell-shaped defect ground structures (DB-DGS), Analytical method and sensitivity analysis

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
It is shown in this paper that a microstrip line loaded with a dumbbell-shaped defect ground structure (DB-DGS) is useful for complex permittivity measurements. The working principle of the sensor is the variation in the notch (resonance) frequency and depth caused by the material under test (MUT), when it is put in contact with the sensitive region of the device, i.e., the capacitive slot. It is demonstrated that the relative sensitivity of the sensor, defined as the variation of the resonance frequency of the DB-DGS with the dielectric constant of the MUT relative to the resonance frequency of the bare structure, does not depend on the geometry of the DB-DGS, provided the substrate is thick enough. The relative sensitivity, the key figure of merit, is dictated by the equivalent dielectric constant of the substrate, and it increases as the substrate permittivity decreases. Using the circuit model of the sensing structure, simple analytical expressions providing the dielectric constant and the loss tangent of the MUT are derived. Such analytical formulas depend on the notch frequency and depth of the sensor with and without MUT in contact with it, i.e., easily measurable quantities. The analysis carried out is corroborated through full-wave electromagnetic simulation and experiments.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Strategies to enhance the data density in synchronous electromagnetic encoders

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, we report two different strategies to enhance the data density in electromagnetic encoders with synchronous reading. One approach uses a periodic chain of rectangular metallic patches (clock chain) that determines the encoder velocity, and dictates the instants of time for retrieving the bits of the identification (ID) code. However, contrary to previous electromagnetic encoders, the ID is inferred at both the rising and the falling edges of the clock signal generated by the clock chain. Moreover, the bits of information are not given by the presence or absence of metallic patches at their predefined positions in the so-called ID code chain. With this novel encoding system, a bit state corresponding to a certain instant of time is identical to the previous bit state, unless there is a change in the envelope function of the ID code signal, determined by the additional non-periodic ID code chain. The other encoding strategy utilizes a single chain of C-shaped resonators, and encoding is achieved by considering four different resonator dimensions, corresponding to four states and, hence, to two bits per resonator of the chain. Thus, with these two strategies, the data density is twice the one achievable in previously reported synchronous electromagnetic encoders.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Circuit Analysis of a Coplanar Waveguide (CPW) Terminated With a Step-Impedance Resonator (SIR) for Highly Sensitive One-Port Permittivity Sensing

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Su, Lijuan|||0000-0002-4753-9340
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Ebrahimi, Amir|||0000-0002-1787-2230
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a single-frequency reflective-mode phase-variation microwave sensor devoted to the dielectric characterization of materials. The device is implemented in coplanar waveguide (CPW) technology and consists of two parts: (i) the sensing region, a step-impedance resonator (SIR) as termination of a CPW transmission line, and (ii) the design region, a cascade of high/low impedance quarter-wavelength inverters, used to boost up the sensitivity. By placing the so-called material under test (MUT) on top of the sensing region, the capacitance of the SIR is altered due to the effects of the dielectric constant of the MUT. This modifies the phase of the reflection coefficient seen from the input port, the output variable. From a circuit analysis, it is demonstrated that the sensitivity for small perturbations in the vicinity of the dielectric constant of a reference (REF) material can be optimized by setting the operation frequency of the sensor to the resonance frequency of the SIR loaded with such REF material. The maximum sensitivity in one of the reported sensors is as high as 66.5°, and the main figure of merit, defined as the ratio between the maximum sensitivity and the area of the sensing region expressed in terms of the squared guided wavelength, is FoM=3643∘/λ2 . Such figure of merit represents a significant improvement as compared to the one of the equivalent sensor implemented by means of an open-ended quarter-wavelength sensing line. Such equivalence between the semi-lumped element (i.e., SIR-based) sensor and the fully distributed counterpart is also analyzed in the paper.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Techniques to Improve the Performance of Planar Microwave Sensors, A Review and Recent Developments

  • Abdolrazzaghi, Mohammad|||0000-0002-4811-8660
  • Nayyeri, Vahid|||0000-0002-0328-4737
  • Martín, Ferran|||0000-0002-1494-9167
Planar microwave sensors have become increasing developed in recent decades, especially in material characterization (solid/liquid) as they provide regions highly sensitive to the surrounding medium. However, when it comes to deciphering the content of practical biological analytes or chemical components inside a host medium, even higher sensitivities are required due to their minute concentrations. This review article presents a comprehensive outlook on various methodologies to enhance sensitivity (e.g., coupling resonators, channel embedding, analyte immobilization, resonator pattern recognition, use of phase variation, using coupled line section, and intermodulation products), resolution (active sensors, differential measurements), and robustness (using machine learning) of arbitrary sensors of interest. Some of the most practical approaches are presented with prototype examples, and the main applications of incorporating such procedures are reported. Sensors with which the proposed techniques are implemented exhibit higher performance for high-end and real-life use.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Balanced Microwave Transmission Lines, Circuits, and Sensors

  • Martín, Ferran|||0000-0002-1494-9167
  • Medina, Francisco|||0000-0002-9947-506X
This paper provides an overview of balanced (or differential-mode) structures operating at microwaves, including common-mode suppression filters, balanced filters and circuits with intrinsic common-mode suppression, and differential-mode sensors. The increasing interest for balanced structures within the framework of communication circuits and sensors, related to their major robustness against electromagnetic interference (EMI), noise, and environmental factors, is duly justified. Then the paper reports various approaches for the implementation of common-mode suppression filters, balanced filters and circuits (including narrowband and wideband filters, multi-band filters, power dividers, couplers and phase shifters), and differential-mode sensors (mainly devoted to the measurement of permittivity and related variables). Rather than providing a detailed analysis of the different considered implementations/approaches, the main goal of this review paper is to discuss, and compare in some cases, the main proposed strategies (pointed out in the up-to-date state-of-the-art) for optimizing the performance of the various differential-mode devices under study.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Portable Reflective-Mode Phase-Variation Microwave Sensor Based on a Rat-Race Coupler Pair and Gain/Phase Detector for Dielectric Characterization

  • Vélez, Paris|||0000-0001-6502-5987
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Elgeziry, Mahmoud|||0000-0002-2801-2826
  • Su, Lijuan|||0000-0002-4753-9340
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Costa, Filippo|||0000-0001-7572-2014
  • Genovesi, Simone|||0000-0002-5323-1780
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a low-cost and portable phase-variation planar microwave sensor operating in reflective mode, where the output variable, the phase of the reflection coefficient of the one-port sensing element, is retrieved by means of a distributed circuit based on a pair of rat-race hybrid couplers and the associated electronics. This includes a microcontroller, a voltage controlled oscillator (VCO), a digital-to-analog converter (DAC), and an RF/microwave gain/phase detector. By this means, vector network analyzers (VNAs), i.e., high-cost instruments typically used for obtaining the reflection coefficient in one-port structures or circulators (microwave components able to separate the injected signal from the reflected signal in any one-port network) are avoided. Indeed, the presented architecture (including the microwave rat-race hybrid configuration and the associated electronics) can be adapted to other one-port reflective-mode phase-variation microwave sensors. A prototype example, where the sensing element is a one-port step-impedance open-ended transmission line, is reported. The device provides the phase of the reflection coefficient of the sensing element as a function of the dielectric constant of the material under test (MUT) with a maximum sensitivity of -65.7° and a relative error of less than 8% in all the measurements.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Frequency-Coded and Programmable Synchronous Electromagnetic Encoders Based on Linear Strips

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
This letter presents electromagnetic encoders where encoding is achieved by considering four different inclusions, particularly linear strips of different length, etched at the predefined positions of the encoder chain, and transversely oriented with regard to the chain axis. Since the length of the strips determines their resonance frequencies, it follows that the 2-bits per inclusion, corresponding to the four possible different states (strip lengths), are frequency-coded. Thus, the reader is a microstrip line with a series gap fed by four harmonic (carrier) signals tuned to the resonance frequencies of the four considered encoder strips. By encoder motion over the reader, each carrier signal is amplitude modulated, with envelope functions exhibiting a peak each time a strip of the encoder chain tuned to the resonance frequency of the considered carrier signal crosses the axis of the reader line. The functionality of the system is experimentally validated in this letter. It is also shown that the encoders can be programmed by considering identical strips and by cutting them appropriately, according to the desired code. The proposed encoders are intrinsically synchronous. Such encoders are useful for measuring displacements and velocities, as well as for the implementation of synchronous near-field chipless radiofrequency identification tags with sequential bit reading.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High Data Density Absolute Electromagnetic Encoders Based on Hybrid Time/Frequency Domain Encoding

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a novel concept for the implementation of electromagnetic encoders exhibiting very high data density per unit length (DPL), a figure of merit (FoM) of such systems. Encoding is based on a hybrid scheme that exploits both the frequency and time domains. The encoders consist of rows of inclusions (linear strips) of different sizes, periodically arranged to form a chain (with four columns). The bits corresponding to each row are read sequentially in a time-division multiplexing scheme, whereas the size of the inclusions provides frequency encoding. The main relevant aspect of the proposed system concerns the reader, based on a power splitter architecture with either two outputs (prototype A) or four outputs (prototype B). It is shown that the data capacity per row in one of the encoders read through prototype B is 8.78 bits, whereas the data density is as high as DPL = 29.26 bit/cm, an unprecedented value in this type of encoders. The proposed system can be used as a near-field synchronous chipless-radio frequency identification (RFID) system, or as a position and velocity sensor. In the latter case, the system is able to provide the absolute encoder position, provided the number of bits per row (or position) is enough to discern the different number of encoder positions (up to 440 different positions for prototype B, corresponding to the indicated number of bits).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly sensitive reflective-mode phase-variation permittivity sensors using coupled line sections

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Su, Lijuan|||0000-0002-4753-9340
  • Martín, Ferran|||0000-0002-1494-9167
Highly sensitive permittivity sensors operating in reflection and exploiting phase variation are presented in this article. The sensors are one-port structures implemented by means of a pair of coupled lines, the sensitive region, with an appropriate termination. In particular, it is demonstrated that by either short-circuiting the crossed port to the input port of the device (opening the remaining two ports), or opening the crossed port to the input port (terminating the other two ports with a short-circuit), the sensitivity can be driven to very high values, controlled by the coupling factor. For that purpose, the electrical length of the pair of coupled lines must be set to 90° when such lines are loaded with the reference (REF) material. Thus, the sensitivity is optimized for dielectric constants (the input variable) in the vicinity of the dielectric constant of the REF material, where the indicated phase condition is fulfilled. The output variable is the phase of the reflection coefficient, an easily measurable quantity. For validation purposes, three prototype sensors are designed and fabricated. The achieved sensitivities in two of the fabricated sensors are as high as 659.6° and 736.0°, with figures of merit (FoMs), or ratio between the maximum sensitivity and the area of the sensing region expressed in terms of the squared-wavelength, of FoM.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Characterization of the denaturation of bovine serum albumin (BSA) protein by means of a differential-mode microwave microfluidic sensor based on slot resonators

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Peytral-Rieu, Olivia|||0000-0003-0404-1718
  • Vélez, Paris|||0000-0001-6502-5987
  • Dubuc, David
  • Grenier, Katia|||0000-0002-5056-5582
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a differential-mode microwave microfluidic sensor useful for the characterization/detection of the denaturation of Bovine Serum Albumin (BSA), a protein with numerous biochemical applications, caused by a chaotropic agent, specifically, urea. The sensor consists of a pair of uncoupled microstrip lines, each one loaded with a transversally oriented slot resonator, etched in the ground plane. The sensor is a device able to detect permittivity changes in the so-called material under test (MUT), or liquid under test (LUT), as compared to a reference (REF) material/liquid. However, since the changes in the permittivity of the BSA caused by the denaturation process are partially obscured by the presence of the urea in the LUT, a protocol to separate the effects of the urea in the sample is proposed. According to such protocol, two different BSA samples, with different concentrations, are needed. It is shown that, with such a method, the denaturation process can be detected and characterized through the so-called hydration contrast, related to the measured difference of the output variables (the cross-mode transmission coefficient) in both BSA samples. The reported protocol and denaturation detection method based on differential-mode microwave sensing, which has never been reported so far, provides hydration contrasts of 0.06 for 6M urea concentrations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly sensitive phase variation sensors based on step-impedance coplanar waveguide (CPW) transmission lines

  • Su, Lijuan|||0000-0002-4753-9340
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
Reflective-mode step-impedance transmission line based sensors for dielectric characterization of solids or liquids have been recently proposed. In this article, in order to further increase the sensitivity, the sensor is implemented in coplanar waveguide (CPW technology), and this constitutes the main novelty of this work. The sensor thus consists of a high-impedance 90° (or low-impedance 180°) open-ended sensing line cascaded to a low-impedance 90° (or high-impedance 90°) line. The output variable is the phase of the reflection coefficient, which depends on the dielectric constant of the material under test (MUT), the input variable. Placing a MUT on top of the sensing line causes a variation in the effective dielectric constant of the line, thereby modifying the phase of such line. This in turn produces a multiplicative effect on the phase of the reflection coefficient, by virtue of the step-impedance discontinuity. The main advantage of the CPW-based sensor, over other similar sensors based on microstrip technology, is the stronger dependence of the phase velocity of the sensing line with the dielectric constant of the MUT, resulting in sensitivities as high as -45.48° in one of the designed sensors. The sensor is useful for dielectric characterization of solids and liquids, and for the measurement of variables related to changes in the dielectric constant of the MUT (defect detection, material composition, etc.).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Phase-variation microwave sensor for permittivity measurements based on a high-impedance half-wavelength transmission line

  • Su, Lijuan|||0000-0002-4753-9340
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
A phase-variation microwave sensor operating in transmission and implemented by means of a high-impedance half-wavelength sensing line is reported in this paper. The sensor is useful for dielectric constant measurements and dielectric characterization of materials. By forcing the electrical length of the sensing line to be a half-wavelength when it is loaded with the so-called reference (REF) material, perfect matching is obtained regardless of the characteristic impedance of the line. This fact can be used to enhance the sensitivity for small perturbations, by merely increasing the characteristic impedance of the sensing line. An exhaustive analysis that supports such conclusion is reported in the paper. Then, two prototype sensors are designed and fabricated for validation purposes. As compared to the ordinary phase-variation permittivity sensor implemented by means of a matched ( 50-Ω) line with identical length, the sensitivity for small perturbations in the proposed sensor is 2.1 times larger. Further advantages of these sensors are low-cost, small size, implementation in planar technology, and very simple design and fabrication, derived from the fact that the sensing region is a half-wavelength transmission line.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

AI-Assisted Ultra-High-Sensitivity/Resolution Active-Coupled CSRR-Based Sensor with Embedded Selectivity

  • Abdolrazzaghi, Mohammad|||0000-0002-4811-8660
  • Kazemi, Nazli|||0000-0002-6541-0233
  • Nayyeri, Vahid|||0000-0002-0328-4737
  • Martín, Ferran|||0000-0002-1494-9167
This research explores the application of an artificial intelligence (AI)-assisted approach to enhance the selectivity of microwave sensors used for liquid mixture sensing. We utilized a planar microwave sensor comprising two coupled rectangular complementary split-ring resonators operating at 2.45 GHz to establish a highly sensitive capacitive region. The sensor's quality factor was markedly improved from 70 to approximately 2700 through the incorporation of a regenerative amplifier to compensate for losses. A deep neural network (DNN) technique is employed to characterize mixtures of methanol, ethanol, and water, using the frequency, amplitude, and quality factor as inputs. However, the DNN approach is found to be effective solely for binary mixtures, with a maximum concentration error of 4.3%. To improve selectivity for ternary mixtures, we employed a more sophisticated machine learning algorithm, the convolutional neural network (CNN), using the entire transmission response as the 1-D input. This resulted in a significant improvement in selectivity, limiting the maximum percentage error to just 0.7% (≈6-fold accuracy enhancement).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Microwave rotation sensor based on reflection phase in transmission lines terminated with lumped resonators

  • Mehrjoo, Zahra|||0000-0002-8577-4704
  • Ebrahimi, Amir|||0000-0002-1787-2230
  • Beziuk, Grzegorz|||0000-0001-6622-569X
  • Martín, Ferran|||0000-0002-1494-9167
A phase variation-based rotation sensor is presented in this article. The sensor is realized using a coplanar waveguide (CPW) terminated with a stepped impedance LC resonator. A circular dielectric slab is rotating above the resonator. Rotation of the slab modifies the overall capacitance and, thus, the input impedance of the resonator. This, in turn, modifies the phase of the reflection coefficient, which is translated to the rotation angle. The sensor's linearity is eventually enhanced by tapering the width of the capacitive metallic patch along the rotation direction. The operation and sensing performance are studied in detail, using a circuit-based analysis and electromagnetic (EM) simulations. The designed sensor is capable of detecting the direction of rotation. A sensor prototype is fabricated and experimentally measured to prove the developed design and analysis procedure.