Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly-sensitive microwave sensors based on open complementary split ring resonators (OCSRRs) for dielectric characterization and solute concentration measurement in liquids

  • Vélez, Paris|||0000-0001-6502-5987
  • Grenier, Katia|||0000-0002-5056-5582
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Dubuc, David
  • Martín, Ferran|||0000-0002-1494-9167
Differential permittivity sensors based on a pair of uncoupled microstrip lines, each one loaded with an open complementary split ring resonator (OCSRR), are proposed in this paper. The sensing principle is based on the measurement of the cross-mode insertion loss, very sensitive to asymmetric loading. Thus, by loading one of the OCSRRs with the reference sample, and the other one with the sample under test (SUT), the difference in the complex permittivity between both samples generates an asymmetry that gives rise to mode conversion. From the measurement of the cross-mode transmission coefficient, the dielectric properties of the SUT can be determined, provided those of the reference sample are well known. It is shown that by adding fluidic channels on top of the OCSRRs, the proposed sensor is useful for the measurement of the complex dielectric constant of liquids, and experimental results in mixtures of ethanol and deionized (DI) water and methanol in DI water, as a function of the ethanol/methanol content, are provided. Due to the high sensitivity of the proposed differential sensor to detect small perturbations (asymmetries), the structure is also of interest for the accurate measurement of solute concentrations in liquid solutions. In this paper, the structure is applied to monitor sodium content in aqueous solutions, and it is found that sodium concentrations as small as 0.25 g/L can be resolved.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Split ring resonator-based microwave fluidic sensors for electrolyte concentration measurements

  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Grenier, Katia|||0000-0002-5056-5582
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Dubuc, David
  • Martín, Ferran|||0000-0002-1494-9167
A differential microwave sensor, based on a pair of uncoupled microstrip lines each one loaded with a split ring resonator (SRR), is applied to the measurement of electrolyte concentration in deionized (DI) water. For that purpose, fluidic channels are added on top of the SRR gaps, the most sensitive parts of the structure. The operating principle is based on the measurement of the cross-mode insertion loss, highly sensitive to small asymmetries caused by differences between the reference liquid and the liquid under test (LUT). In this paper, the reference liquid is pure DI water (the solvent), whereas the solution, DI water with electrolyte content, is injected to the LUT channel. The proposed sensor is able to detect electrolyte concentrations as small as 0.25 g/L, with maximum sensitivity of 0.033 (g/L) ⁻¹ . The sensor is validated by measuring the concentration of three types of electrolytes, i.e., NaCl, KCl, and CaCl2. Finally, the sensor is applied to monitor variations of total electrolyte concentration in urine samples.