Skip to main content

INTEGRACION ELECTRONICA EN SUSTRATOS TEXTILES PARA EL DESARROLLO DE TEJIDOS INTELIGENTES

TEC2016-79465-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effects of the fabric substrate on performance and durability of textile-embroidered dipole antennas

  • Ventura Casellas, Heura
  • Parés Sabatés, Ferran
  • Fernández García, Raúl
  • Gil Galí, Ignacio
  • Ardanuy Raso, Mònica
In this work, several fabrics with different composition and structure have been used as the substrate for the production of wearable textile-embroidered dipole antennas. The performance of the antennas has been determined by measuring their resonance frequency, return loss and bandwidth. To determine their durability as wearable fabrics, the performance has been assessed before and after subjecting the antennas to washing and abrasion cycles. The results revealed that the woven fabrics presented a good washing fastness, even in fabrics having elastic fibers or low-crimp structures. In all cases, a good performance of the antennas was maintained after 30 washing cycles. For the abrasion cycles, the substrates with higher stability (measured as the crimp ratio) presented a higher wear fastness, whereas a higher variability was observed for the substrates with lower stability, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Textile UHF-RFID antenna sensor for measurements of sucrose solutions in different levels of concentration

  • Luo, Chengyang
  • Gil Galí, Ignacio
  • Fernández García, Raúl
With the trend of textile antennas development, ultra high frequency (UHF, 865–868 MHz) radio frequency identification (RFID) devices using textile materials are expected to be developed in many areas for replacing or simplifying some complex RFID devices on a PCB. In this paper, we present a textile UHF-RFID tag with two sensing positions ('radiation parts' and 'loop part') for exploring the feasibility of sucrose solutions measurements and the relationship between variables of the proposed design and the sucrose solutions. The simulated and measured resonance curves of the designs both match well (-20 dB in the simulation and -15.8 dB in the measurement at 868 MHz) and the read range measured by the RFID reader (M6e kit) is 1.71 m in air. Before the tests by the solutions on the proposed designs, a test board is developed as a preparation work for confirming the relative dielectric constants of the sensing substrate area in the real measurements. Compare the results of the simulation and the real tests, the proposed design shows good feasibility by comparing the simulated and measured results in confirmed relative dielectric constants. Moreover, its two sensing positions have different sensing features. The sensing 'radiation parts' position shows a stable frequency operation performance but sensing range is from 1.71 m (dry) to 2.3 m, while the sensing 'loop part' position has a wide sensing range from 0.4 m to 1.71 m (dry) but a lower frequency operation performance., This work was supported by Spanish Government-MINECO under Project TEC2016- 79465-R and China Scholarship Council No.201908440233., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Textile wearable antenna sensors based on open ring resonators

  • Moradi, Bahareh
  • Fernández García, Raúl
  • Gil Galí, Ignacio
In this paper, a wearable antenna sensor based on a textile open ring resonator is presented. The antenna sensor consists of an open ring resonator whose resonance frequency is modified due to the antenna bending impact. The antenna sensor is embroidered, tested, and the measured results are reported in the paper. The results show output sensitivity from 0.4 MHz/mm to 2.2 MHz/mm which demonstrate the usefulness of textile open ring resonators on the development of antenna sensors. © Institution of Engineering and Technology.All Rights Reserved., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Wearable metamaterial for electromagnetic radiation shielding

  • Almirall Toribio, Oriol
  • Fernández García, Raúl
  • Gil Galí, Ignacio
A novel wearable Frequency Selective Surface (FSS) created using fabric materials capable of blocking electromagnetic radiation around the frequency of 10.64 GHz (X Microwave frequency band) is presented in this paper. Two different unit cell shapes are tested: embroidered metal yarn squares and hexagons. A cotton fabric with permittivity 1.9 and thickness 0.4 mm is used as a substrate. The proposed design is validated by comparison of 3 D electromagnetic simulations and measurements. The obtained results correspond to a maximum absorptivity of 99.23% at 10.63 GHz for the simulation using a square as unit cell, whereas the simulations using hexagons led to a maximum in absorptivity of 99.94% at 10.68 GHz. Experimental results, at their turn, showed maximums of 98.39% for the squares and 98.00% for the hexagons, both at 10.46 GHz. So, results showed that the textile was actually offering a high degree of electromagnetic shielding, increasing the safety for civil and occupational exposures to electromagnetic radiation. In this case, this protection is offered at the microwave frequencies, used especially for telecommunications Earth-satellite which is in the range considered as a potential risk by the WHO (World Health Organization)., This work was supported by the Spanish Government MINECO under Project TEC2016-79465-R., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Embroidered textile frequency-splitting sensor based on stepped-impedance resonators

  • Vélez, Paris
  • Martín, Ferran
  • Fernández García, Raúl
  • Gil Galí, Ignacio
©2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents an embroidered textile frequency-splitting microwave sensor based on a pair of identical stepped-impedance resonators (SIRs) loading a microstrip transmission line. The sensor is implemented by means of conductive threads. The sensing region of the proposed structure is the capacitive square patch of one of the SIRs. If such region is kept unaltered, the structure is symmetric, and the frequency response (transmission coefficient) exhibits a single transmission zero. However, if symmetry is broken (e.g., through liquid absorption in the sensing region), the frequency response of the proposed sensor exhibits two transmission zeros (frequency splitting). The difference (in frequency and magnitude) between such zeros (or notches) is intimately related to the dielectric properties of the absorbed liquids to be sensed / detected. The proposed sensing structure is applied to the detection of deionized (DI) water absorption, and to the quantification of the number of DI water drops. The maximum measured sensitivity is found to be 2.70 MHz /µl and 0.03 dB /µl for the incremental frequency and incremental magnitude of the notches., This work was supported by MICIIN-Spain (projects PID2019-103904RB-I00, TEC2016-79465-R, and PDC2021-121085-I00),Generalitat de Catalunya (project 2017SGR-1159), Institució Catalana de Recerca i Estudis Avançats (who awarded Ferran Martín), and by FEDER funds., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Embroidered textile capacitive sensor for sucrose solutions measurement

  • Luo, Chengyang
  • Fernández García, Raúl
  • Gil Galí, Ignacio
With the trend of textile sensors, embroidered sensors for body fluids measurements are getting attention. In this paper, an embroidered textile sensor with a capacitive spiral structure is proposed and used to measure the capacitance when being poured by sucrose solutions with different levels of concentration at different frequencies. Since the coefficient of determination (R2) near 0.997 from 250 Hz to 500 Hz shows the curves fitting well, the feasibility of the capacitance varying with different levels of concentration (0 - 250 mg/dl) in a linear curve at certain frequency range (250 - 500 Hz) is confirmed., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A full textile capacitive woven sensor

  • Martínez Estrada, Marc
  • Ventura Casellas, Heura
  • Gil Galí, Ignacio
  • Fernández García, Raúl
In this paper, a full textile capacitive woven sensor integrated over a textile substrate is presented. The sensor consists in an interdigitated capacitance prepared to measure moisture and/or presence detection. In order to evaluate the sensor response to moisture, capacitance has been measured by means of an LCR meter from 20 Hz to 20 kHz in a climatic chamber with a swept of the relative humidity (RH) from 30% to 90% at 20 °C. Subsequently, presence response is evaluated measuring the capacitance of the woven sensor meanwhile a person is sitting down and getting up. The woven sensor results demonstrate its functionality over moisture measurement where sensor capacitance changes from a minimum of 9.74 pF at 30% RH to a maximum of 2.31 uF at 90% RH. The presence detection is also demonstrated, which makes the capacitance variation change from a 10% of capacitance variation when the chair is empty, to a capacitance variation of 170% when a person is sitting on it. The adaptation of the weaving process to accomplish a fully integrated sensor provides a better repeatability than previous embroidered sensors and opens a door to being commercially produced., This work was supported by Spanish Government-MINECO under Project TEC2016-79465-R and AGAUR-UPC(2020 FI-B 00028). Agencia de Gestión de Ayudas Universitarias y de Investigación, Generalitat de Catalunya., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A novel ultra-wide band wearable antenna under different bending conditions for electronic-textile applications

  • El Gharbi, Mariam
  • Martínez Estrada, Marc
  • Fernández García, Raúl
  • Ahyoud, Saida
  • Gil Galí, Ignacio
This is an Accepted Manuscript of an article published by Taylor & Francis Group in The Journal of The Textile Institute on 5 May 2020, available online at: http://www.tandfonline.com/10.1080/00405000.2020.1762326, This paper is devoted to a novel textile ultra-wideband (UWB) antenna for wearable applications. The antenna is designed and implemented on a felt textile substrate with attractive features such as a flexible full embroidered topology and a low dielectric loss. In this study, the UWB antenna is evaluated through the reflection coefficient (S11), gain, efficiency and effects of bending. The UWB operation of this compact antenna varies from 3.1GHz to 11.3 GHz implying a fractional bandwidth of 114%, in which the efficiency is over 60% and the realized gain reaches 4dB., This work was supported by the Spanish Government MINECO under Project TEC2016-79465-R and the Erasmus + project National Agencies and the European Commission under grant Erasmus + KA107., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Embroidered wearable antenna-based sensor for real-time breath monitoring

  • El Gharbi, Mariam
  • Fernández García, Raúl
  • Gil Galí, Ignacio
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In this paper we present the design and the validation of a novel fully embroidered meander dipole antenna-based sensor integrated into a commercially available T-shirt for real-time breathing monitoring using the technique based on chest well movement analysis. The embroidered antenna-based sensor is made of a silver-coated nylon thread. The proposed antenna-sensor is integrated into a cotton T-shirt and placed on the middle of the human chest. The breathing antenna-based sensor was designed to operate at 2.4 GHz. The sensing mechanism of the system is based on the resonant frequency shift of the meander dipole antenna-sensor induced by the chest expansion and the displacement of the air volume in the lungs during breathing. The resonant frequency shift was continuously measured using a Vector Network Analyzer (VNA) to a remote PC via LAN interface in real-time. A program was developed via Matlab to collect respiration data information using a PC host via LAN interface to be able to transfer data with instrumentation over TCP/IP. The measurements were carried out to monitor the breathing of a female volunteer for various positions (standing and sitting) with different breathing patterns: eupnea (normal respiration), apnea (absence of breathing), hypopnea (shaloow breathing) and hyperpnea (deep breathing). The measured resonance frequency shift to 2.98 GHz, 3.2 GHz and 2 GHz for standing position and 2.84 GHz, 2.95 GHz and 2.15 GHz for sitting position, for eupnea, hyperpnea and hypopnea, respectively. The area of the textile sensor is 45 x 4.87 mm2 , reducing the surface consumtion significatively with regard to other reported breath wearable sensors for health monitoring., This work was supported by the Spanish Government MINECO under project TEC2016-79465-R., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Evaluating silver-plated nylon (Ag/PA66) e-textiles for bioelectrical impedance analysis (BIA) application

  • Logothetis, Irini
  • Gil Galí, Ignacio
  • Vatansever, Derman
  • Dabnichki, Peter
  • Pirogova, Elena
Bioelectrical Impedance Analysis (BIA) is an established method for assessing integrity of biotissue. Adapting BIA as a diagnostic tool to monitor electrophysiological activity gives rise to evidence-based objective diagnostic approaches as opposed to visual assessment currently performed by practitioners in wound healing management. Advancements in the telecommunication and textile industries have made the Internet of Wearable Things (IoWT), the future of telemedicine. E-textile electrodes give us the ability for long-term monitoring applications; however, they are associated with electrode polarization impedance (Zp) contributing to the electrode-skin impedance (Zes). By studying the design of e-textile electrodes, we can reduce Zp and characterise it relative to changes in skin properties, such as skin temperature and perspiration. In this study, we examined the effects of selected textile substrates on changes in Zp of e-textile electrodes, and characterized Zp in a climatic chamber with temperature and relative humidity settings emulating skin temperature and perspiration. An air permeability test was also conducted to account for the physiological comfort of the e-textile electrodes. Our results demonstrate that a polyester non-woven felt substrate is ideal for use in e-textile electrodes. By understanding and quantifying the relationship between Zp, skin temperature and perspiration, this insight can be incorporated into the calibration process of BIA systems for accurate long-term monitoring resulting in an objective assessment of changes in tissue integrity., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Study of double ring resonator embroidered wearable antennas for microwave applications

  • Moradi, Bahareh
  • Martínez Estrada, Marc
  • Fernández García, Raúl
  • Gil Galí, Ignacio
In this work, the design, implementation and test of double ring resonator (DRR) wearable antennas is carried out. Specifically, symmetrical and non-symmetrical DRRs are coupled to a transmission line by means embroidered metallic thread on a felt substrate. Both designs present good e-textile antenna parameters performance in terms of return loss, directivity, realized gain and efficiency. Moreover, the specific absorption rate (SAR) to preserve the human body safety from radiation has been analyzed by means of numerical simulations including a realistic human voxel model, according to the international regulation. Experimental results confirm that the embroidered DRR antennas present a useful technique to transmit/receive microwave signals on wearable applications., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Wearable high-performance meander ring dipole antenna for electronic-textile applications

  • Moradi, Bahareh
  • Fernández García, Raúl
  • Gil Galí, Ignacio
This is an Accepted Manuscript of an article published by Taylor & Francis Group in The Journal of The Textile Institute on 17/06/19, available online at: http://www.tandfonline.com/10.1080/00405000.2019.1628886, A novel wearable dipole antenna at 325¿MHz resonance frequency is presented in this article. A felt fabric with permittivity 1.2 and thickness 0.7¿mm is used as a substrate. The proposed design is validated by comparison of 3D electromagnetic simulations and measurements. The obtained results correspond to S11 < -18¿dB and a gain 1.5¿dB at resonance frequency, with 49% efficiency and a 20¿MHz bandwidth. Moreover, the effect of bending of the e-textiles under realistic scenarios is also studied. The measured results show that by changing the radius of bending from 32.5 to 3¿cm, the resonance frequency is shifted up 10¿MHz with a sensitivity of 0.285¿MHz/cm., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

E-textile metamaterials: stop band pass filter

  • Moradi, Bahareh
  • Fernández García, Raúl
  • Gil Galí, Ignacio
In this paper, the utilization of common fabrics for the manufacturing of e-textile metamaterial is investigated. The proposed design is based on a transmission line loaded with split-ring resonators (SRRs) on a cotton substrate for filter signal application. The proposed design provides a stop band between 2.7 GHz and 4.7 GHz, considering a four stage SRR topology. Experimental results showed stop band levels higher than -30 dB for the proposed compact embroidered metamaterial e-textiles. The validated results confirmed embroidery as a useful technique to obtain customized electromagnetic filter properties, such as transmitted signal filtering and control, on wearable tech device applications., This work was supported by the Ministry of Economy, Industry and Competitiveness under project TEC2016-79465-R., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Textile antenna-sensor for In vitro diagnostics of diabetes

  • El Gharbi, Mariam
  • Fernández García, Raúl
  • Gil Galí, Ignacio
In this paper, a feasibility study of a microwave antenna-based sensor is proposed for in vitro experiments for monitoring blood glucose levels. The proposed device consists of a square-ring incorporated within a fully textile monopole antenna to absorb and sense different glucose concentrations, covering patients with different diabetic conditions. The designed antenna-sensor is optimized to operate at 2.4 GHz. The sensing principle is based on the resonance frequency shift of the reflection response of the antenna-based sensor under different glucose levels. The experiments were carried out with blood mimicking by means of aqueous solutions, using D(+)- glucose/water in different concentrations for various diabetic conditions of type-2 diabetes. The performance of the embroidered antenna-based sensor is characterized and validated using a convenient setup for in vitro measurements. The results demonstrated the ability of the proposed antenna-based sensor to cover all the glucose levels of the diabetes range, including hypoglycemia (10–70 mg/dL), normoglycemia (80–110 mg/dL) and hyperglycemia (130–190 mg/dL) with a sensitivity of 350 kHz/(mg/dL). Besides its ability to detect different glucose concentrations of various diabetic conditions, the proposed antenna-sensor presents diverse features such as a simplistic design, compact size, wearability and low cost. The proposed textile device demonstrates a proof of concept for efficient in vitro blood glucose level measurements and diagnostics of diabetes., This work was supported by the Spanish Government-MINECO under Projects TEC2016- 79465-R., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Textile UHF-RFID antenna embroidered on surgical masks for future textile sensing applications

  • Luo, Chengyang
  • Gil Galí, Ignacio
  • Fernández García, Raúl
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Ultra High Frequency (UHF, 865-868 MHz) Radio Frequency Identification (RFID) devices are expected to be implemented in many health-caring areas. In this paper, we present three progressive designs of textile UHF-RFID antennas on surgical masks using a function-extensible integrated circuit (IC) chip (Rocky 100). The simulated and measured resonance curves of the designs all match well (|S11| < -20 dB at 868 MHz) and the maximum realized gain are improved progressively in order to overcome the difficulty of the chip low sensitivity and increase the maximum read range. The best type (Design 3) is selected and its read range measured by the RFID reader (M6e kit) can reach 2.5 m in air. In addition, several reliability validation measurements are performed, such as bending and skin contact, and maximum read range can reach 1.1 m considering the on-body worn worst case. The proposed Design 3 allows common use as a tag for tracking or safe distance alert under an epidemic situation. Alternatively, for the used function-extensible chip, the design can be applied to many different types of sensors for various application scenarios., This work was supported in part by Spanish Government-MINECO under Project TEC2016-79465-R, and China Scholarship Council under Grant No.201908440233., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Electro-textile UHF-RFID compression sensor for health-caring applications

  • Luo, Chengyang
  • Gil Galí, Ignacio
  • Fernández García, Raúl
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Electro-textile Ultra High Frequency (UHF, 865–868 MHz) Radio Frequency Identification (RFID) devices have great potential to be explored as sensors due to the features of fabric materials. In this work, an electro-textile UHF-RFID compression sensor base on T-match structure with a corresponding interface are developed and evaluated for two application scenarios. For accurate textile UHF-RFID antenna design and maximize the read range, the impedance of the electro-textile based on snap buttons is modelled and characterized an a measured read range of 5.22m is experimentally obtained. If the distance of the RFID reader and RFID sensor remain constant at 1 m. The experimental results show that RSSI range change from -42 dBm to -58 dBm as a quadratic function in terms of the knee angle bending and from -45 dBm to -40 dBm during expiration and inspiration phase when the sensor is located on the chest, which validated the usefulness of the proposed sensor., This work was supported in part by Spanish Government-MINECO under Project TEC2016-79465-R and China Scholarship Council under Grant No.201908440233., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Embroidered metamaterial antenna for optimized performance on wearable applications

  • Gil Galí, Ignacio
  • Seager, Rob
  • Fernández García, Raúl
In this work, an embroidered metamaterial monopole antenna based on a split ring resonator electromagnetic bandgap shielding structure is designed, simulated, and tested. This work investigates the impact of different types of embroidering metamaterial patterns on the antenna performance, shielding effect in terms of human safety through specific absorption rate analysis and degree of material wearability, in comparison with the standard antenna topologies. The proposed antenna design presents a full compact embroidered metamaterial device manufactured in felt textile substrate and requires a 85¿×¿70¿mm2 area, operating at 2.45¿GHz. On-voxel analysis reveals that specific absorption standards are satisfied for both public and occupational sector with a significant safety margin whereas the antenna performance in terms of gain and directivity are significantly optimized with regard to standard wearable materials., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Meander microwave bandpass filter on a flexible textile substrate

  • Moradi, Bahareh
  • Fernández García, Raúl
  • Gil Galí, Ignacio
This paper presents an alternative process to fabricate flexible bandpass filters by using an embroidered yarn conductor on an electronic textile. The novelty of the proposed miniaturized filter is its complete integration on the outfit, with benefits in terms of compressibility, stretchability, and high geometrical accuracy opening the way to develop textile filters for wearable applications in sport and medicine. The proposed design consists of a fully embroidered microstrip topology with a length equal to quarter wavelength (¿/4) to develop a bandpass filter frequency response. A drastic reduction in the size of the filter was achieved by taking advantage of a simplified architecture based on meandered-line stepped impedance resonator. The e-textile microstrip filter was designed, simulated, fabricated, and measured with experimental validation at a 7.58 GHz frequency. The insertion loss obtained by simulation of the filter was substantially small. The return loss was greater than 20 dB for bands. To explore the relations between the physical parameters and filter performance characteristics, a theoretical equivalent circuit model of the filter constituent components was studied. The bending effect of the e-textile filter was also studied. The results showed that by raising the radius of bending to 40 mm, the resonance frequency was raised to 4.25 MHz/mm., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Determination of salinity and sugar concentration by means of a circular-ring monopole textile antenna-based sensor

  • El Gharbi, Mariam
  • Martínez Estrada, Marc
  • Fernández García, Raúl
  • Gil Galí, Ignacio
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a monopole antenna-based sensor for measuring different amounts and concentrations of salt and sugar in water. The proposed antenna sensor consists of a textile monopole antenna with circular-ring and partial ground plane. It is implemented by means of embroidery on a felt textile substrate and it resonates at 2.4 GHz. The textile substrate can absorb liquids through the sensing area incorporated within the monopole antenna structure. Therefore, the substrate dielectric properties are changed according to the liquid properties of the absorbed solution. The proposed antenna sensor uses microwave signals to track different amount and concentrations of salt and sugar in terms of the magnitude of the return loss and resonance frequency shift. The measurements are recorded and compared before and after applying different solutions. The rinsing reliability of the proposed antenna sensor has been also studied. The proposed antenna sensor demonstrates a high sensitivity of 800 MHz/mL with a good correlation with the linear fit ( R2=0.9737 ) and 550 MHz/mL with linear response ( R2=0.9135 ) for 5% salt and sugar concentration solutions, respectively. To the best of our knowledge, this article demonstrates for the first time the capability of a fully-textile antenna sensor to detect different amounts and concentrations of salt and sugar using microwave signals., This work was supported by the Spanish Goverment MINECO under Project TEC2016-79465-R., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Embroidery manufacturing techniques for textile dipole antenna applied to wireless body area network

  • Gil Galí, Ignacio
  • Fernández García, Raúl
  • Tornero García, José Antonio
This paper addresses the design, simulation, manufacturing and experimental test of textile dipole antennas based on advanced embroidery techniques. The proposed dipoles are intended to operate at the 2.45 GHz industrial scientific and medical radio band for wireless body area network applications. Two medium stitch density embroidery patterns have been studied: satin fill and contour fill, implemented according to the ISO 4915:1991 301 stitch type standard. The impact and viability of these embroidery techniques over the dipole performance in cotton and felt textile substrates are reported. Test results confirm notable antenna parameter results in terms of return loss, radiation pattern, realized gain and efficiency. In particular, contour pattern has been revealed as the best embroidery manufacturing technique in terms of quality factor and losses, whereas the satin pattern fits with a higher degree of accuracy the resonance frequency of the antenna., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A review of flexible wearable antenna sensors: design, fabrication methods, and applications

  • El Gharbi, Mariam
  • Fernández García, Raúl
  • Ahyoud, Saida
  • Gil Galí, Ignacio
This review paper summarizes various approaches developed in the literature for antenna sensors with an emphasis on flexible solutions. The survey helps to recognize the limitations and advantages of this technology. Furthermore, it offers an overview of the main points for the development and design of flexible antenna sensors from the selection of the materials to the framing of the antenna including the different scenario applications. With regard to wearable antenna sensors deployment, a review of the textile materials that have been employed is also presented. Several examples related to human body applications of flexible antenna sensors such as the detection of NaCl and sugar solutions, blood and bodily variables such as temperature, strain, and finger postures are also presented. Future investigation directions and research challenges are proposed., This work was supported by the Spanish Government-MINECO under Projects TEC2016-79465-R., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Wearable textile UHF-RFID sensors: a systematic review

  • Luo, Chengyang
  • Gil Galí, Ignacio
  • Fernández García, Raúl
Textile radio-frequency identification operating in ultra-high frequency (UHF-RFID) sensors based on different scenarios are becoming attractive with the forthcoming internet of things (IoT) era and aging society. Compared with conventional UHF-RFID sensors, textile UHF-RFID sensors offer the common textile features, light weight, washability and comfort. Due to the short time and low level of development, researches on the integration of textile UHF-RFID techniques and textile sensing techniques are not flourishing. This paper is motivated by this situation to identify the current research status. In this paper, we provide a systematic review of the fundamentals of textile UHF-RFID sensors techniques, materials, the brief history and the state-of-the-art of the scenario-based development through detailed summary and analysis on the achievements from the starting year of 2004 to the present time. Moreover, according to the analysis, we give a proposal of the future prospects in several aspects, including the new materials and manufacturing processes, machine learning technology, scenario-based applications and unavoidable reliability., This work was supported by Spanish Government-MINECO under Project TEC2016-79465-R and ChinaScholarship Council No. 201908440233., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Embroidered textile frequency-splitting sensor based on stepped-impedance resonators

  • Vélez, Paris|||0000-0001-6502-5987
  • Martín, Ferran|||0000-0002-1494-9167
  • Fernández-García, Raúl|||0000-0002-4030-7256
  • Gil, Ignacio|||0000-0002-7175-5756
This paper presents an embroidered textile frequency-splitting microwave sensor based on a pair of identical stepped-impedance resonators (SIRs) loading a microstrip transmission line. The sensor is implemented by means of conductive threads. The sensing region of the proposed structure is the capacitive square patch of one of the SIRs. If such region is kept unaltered, the structure is symmetric, and the frequency response (transmission coefficient) exhibits a single transmission zero. However, if symmetry is broken (e.g., through liquid absorption in the sensing region), the frequency response of the proposed sensor exhibits two transmission zeros (frequency splitting). The difference (in frequency and magnitude) between such zeros (or notches) is intimately related to the dielectric properties of the absorbed liquids to be sensed //μl/μl.