Skip to main content

DISEÑO E IMPLEMENTACION DE PILOTOS AUTOMATICOS PARA VEHICULOS AEREOS NO TRIPULADOS (UAVS) MEDIANTE TECNICAS DE OPTIMIZACION Y CONTROL AVANZADO

TIN2011-28082

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Smart-Distributed Pareto Front Using ev-MOGA Evolutionary Algorithm

  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Blasco, Xavier|||0000-0002-9737-2833
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Reynoso Meza, Gilberto
[EN] Obtaining multi-objective optimization solutions with a small number of points smartly distributed along the Pareto front is a challenge. Optimization methods, such as the nor- malized normal constraint (NNC), propose the use of a filter to achieve a smart Pareto front distribution. The NCC optimization method presents several disadvantages related with the procedure itself, initial condition dependency, and computational burden. In this article, the epsilon-variable multi-objective genetic algorithm (ev-MOGA) is pre- sented. This algorithm characterizes the Pareto front in a smart way and removes the disadvantages of the NNC method. Finally, examples of a three-bar truss design and controller tuning optimizations are presented for comparison purposes., This work was partially supported by the FPI-2010/19 grant and the PAID-06-11 project from the Universitat Politècnica de València, projects TIN2011-28082 and ENE2011-25900 (Spanish Ministry of Economy and Competitiveness) and the GV/2012/073 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Preference driven multi-objective optimization design procedure for industrial controller tuning

  • Reynoso Meza, Gilberto
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Blasco, Xavier|||0000-0002-9737-2833
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
Multi-objective optimization design procedures have shown to be a valuable tool for con- trol engineers. These procedures could be used by designers when (1) it is difficult to find a reasonable trade-off for a controller tuning fulfilling several requirements; and (2) if it is worthwhile to analyze design objectives exchange among design alternatives. Despite the usefulness of such methods for describing trade-offs among design alterna- tives (tuning proposals) with the so called Pareto front, for some control problems finding a pertinent set of solutions could be a challenge. That is, some control problems are com- plex in the sense of finding the required trade-off among design objectives. In order to improve the performance of MOOD procedures for such situations, preference handling mechanisms could be used to improve pertinency of solutions in the approximated Pareto front. In this paper an overall MOOD procedure focusing in controller tuning applications using designer s preferences is proposed. In order to validate such procedure, a bench- mark control problem is used and reformulated into a multi-objective problem statement, where different preference handling mechanisms in the optimization process are evalu- ated and compared. The obtained results validate the overall proposal as a potential tool for industrial controller tuning., This work was partially supported by projects TIN2011-28082, ENE2011-25900 from the Spanish Ministry of Economy and Competitiveness. First author gratefully acknowledges the partial support provided by the postdoctoral fellowship BJT-304804/2014-2 from the National Council of Scientific and Technologic Development of Brazil (CNPq) for the development of this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Latent variable based model predictive control: Ensuring validity of predictions

  • Laurí Pla, David
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Hilario Caballero, Adolfo|||0000-0002-3237-8652
This paper presents a methodology to constrain the optimisation problem in LV-MPC so that validity of predictions can be ascertained. LV-MPC is a model-based predictive control methodology implemented in the space of the latent variables and is based on a linear predictor. Provided real processes are non-linear, there is model-process mismatch, and under tight control, the predictor can be used for extrapolation. Extrapolation leads to bad predictions which deteriorates control performance, hence the interest in validity of predictions. In the proposed approach first two validity indicators on predictions are defined. The novelty in the two indicators proposed is they neglect past data, and so validity of predictions is ascertained in terms of future moves which are actually the degrees of freedom in the optimisation. Second, the indicators are introduced in the optimisation as constraints. Provided the indicators are quadratic, recursive optimisation with linearised constraints is implemented. A MIMO example shows how ensuring validity of predictions neglecting past data can improve closed-loop performance, specially under tight control outside the identification region. (C) 2012 Elsevier Ltd. All rights reserved., The first author is recipient of a fellowship from the Spanish Ministry of Science and Innovation (FPU AP2007-04549). This paper is partially funded by projects DPI2008-02133/DPI, TIN2011-28082 and PROMETEO/2012/028. The authors gratefully acknowledge reviewers' comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multi-Objective Optimization for Wind Estimation and Aircraft Model Identification

  • Velasco Carrau, Jesús
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Salcedo-Romero-de-Ávila, José-Vicente|||0000-0003-1577-5039
  • Bishop, Robert H.
In this paper, a novel method for aerodynamic model identification of a micro-air vehicle is proposed. The principal contribution is a technique of wind estimation that provides information about the existing wind during flight when no air-data sensors are available. The estimation technique employs multi-objective optimization algorithms that utilize identification errors to propose the wind-speed components that best fit the dynamic behavior observed. Once the wind speed is estimated, the flight experimentation data are corrected and utilized to perform an identification of the aircraft model parameters. A multi-objective optimization algorithm is also used, but with the objective of estimating the aerodynamic stability and control derivatives. Employing data from different flights offers the possibility of obtaining sets of models that form the Pareto fronts. Deciding which model best adjusts to the experiments performed (compromise model) will be the ultimate task of the control engineer., The authors would like to thank the Spanish Ministry of Innovation and Science for providing funding through grant BES-2012-056210 and projects TIN-2011-28082 and ENE-25900. We also want to acknowledge the Generalitat Valenciana for financing this work through project PROMETEO/2012/028.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Controller tuning by means of evolutionary multiobjective optimization: current trends and applications

  • Reynoso Meza, Gilberto
  • Blasco, Xavier|||0000-0002-9737-2833
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
Control engineering problems are generally multi-objective problems; meaning that there are several specifications and requirements that must be fulfilled. A traditional approach for calculating a solution with the desired trade-off is to define an optimisation statement. Multi-objective optimisation techniques deal with this problem from a particular perspective and search for a set of potentially preferable solutions; the designer may then analyse the trade-offs among them, and select the best solution according to his/her preferences. In this paper, this design procedure based on evolutionary multiobjective optimisation (EMO) is presented and significant applications on controller tuning are discussed. Throughout this paper it is noticeable that EMO research has been developing towards different optimisation statements, but these statements are not commonly used in controller tuning. Gaps between EMO research and EMO applications on controller tuning are therefore detected and suggested as potential trends for research., The first author is grateful for the hospitality and availability of the UTC at the University of Sheffield during his academic research stay at 2011; especially to Dr. P.J. Fleming for his valuable comments and insights in the development of this paper. This work was partially supported by Grant FPI-2010/19 and project PAID-2011/2732 from the Universitat Politecnica de Valencia and projects TIN2011-28082 and ENE2011-25900 from the Spanish Ministry of Economy and Competitiveness.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Algoritmos Evolutivos y su empleo en el ajuste de controladores del tipo PID: Estado Actual y Perspectivas, Evolutionary Algorithms for PID controller tuning: Current Trends and Perspectives

  • Reynoso Meza, Gilberto
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Blasco, Xavier|||0000-0002-9737-2833
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
[ES] Los controladores PID continúan siendo una solución fiable, robusta, práctica y sencilla para el control de procesos. Actualmente constituyen la primera capa de control de la gran mayoría de las aplicaciones industriales. De ahí que un número importante de trabajos de investigación se han orientado a mejorar su rendimiento y prestaciones. Las líneas de investigación en este campo van desde nuevos métodos de ajuste, pasando por nuevos tipos de estructura hasta metodologías de diseño integrales. Particularizando en el ajuste de parámetros, una de las formas de obtener una solución novedosa consiste en plantear un problema de optimización, el cual puede llegar a ser no-lineal, no-convexo y con restricciones. Dado que los algoritmos evolutivos han mostrado un buen desempeño para solucionar problemas complejos de optimización, han sido utilizados en diversas propuestas relacionadas con el ajuste de controladores PID. Este trabajo muestra un revisión de estas propuestas y las prestaciones obtenidas en cada caso. Así mismo, se identifican algunas tendencias y posibles líneas de trabajo futuras., [EN] PID controllers are a reliable, robust, practical and easy to implement control solution for industrial processes. They provide the first control layer for a vast majority of industrial applications. Owing to this, several researches invest time and resources to improve their performance. The research lines in this field scope with new tuning methods, new types of structures and integral design methods. For tuning methods, improvements could be fulfilled stating an optimization problem, which could be non-linear, non-convex and highly constrained. In such instances, evolutionary algorithms have shown a good performance and have been used in various proposals related with PID controllers tuning. This work shows a review of these proposals and the benefits obtained in each case. Some trends and possible future research lines are also identified., Este trabajo ha sido realizado parcialmente gracias al apoyo del Ministerio de Economía y Competitividad (Gobierno de España) mediante los proyectos TIN2011 - 28082, ENE2011- 25900; la Generalitat Valenciana mediante la iniciativa GV/2012/ 073 y la Universitat Politècnica de València a travès de la beca FPI-2010/19 y la iniciativa de investigacion PAID-06-11.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Desarrollo y evaluación de una estación de control de tierra para vehículos aéreos no tripulados

  • Velasco Carrau, Jesús
  • Reynoso Meza, Gilberto
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Sanchís Saez, Javier|||0000-0001-9697-2696
Los vehículos aéreos no tripulados (UAV¿s) son vehículos autónomos, diseñados para cumplir con diversas misiones en el ámbito civil y militar. Actualmente, se comienza a extender su uso en situaciones donde la misión de vuelo conlleva la posibilidad de riesgo de pérdidas humanas. En el siguiente documento, se describe el desarrollo del sistema de telemetría para la gestión de las comunicaciones entre dispositivos UAVs y las estaciones de tierra que monitorizan el comportamiento de estos sistemas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sintonización de controladores Pareto-óptimo robustos para sistemas multivariables. Aplicación en un helicóptero de 2 grados de libertad, Tuning of Pareto-optimal robust controllers for multivariable systems. Application on helicopter of two-degress-of-freedom

  • Carrillo Ahumada, J.
  • Reynoso Meza, G.
  • García Nieto, S.
  • García Alvarado, M.A.
  • Sanchís Saez, Javier|||0000-0001-9697-2696
[ES] La sintonización de controladores Pareto-óptimo robustos ha sido empleada para mejorar el rendimiento de un helicóptero de dos grados de libertad con un algoritmo de control lineal. El procedimiento de sintonización del controlador está basado en la minimización simultánea de las integrales de la suma del cuadrado del error y de la acción de control. Como resultado de dicha minimización y dado que los objetivos entran en conflicto, se obtiene un conjunto de soluciones que describen un frente de Pareto. Posteriormente, un proceso de análisis en los mismos es llevado a cabo para seleccionar los controladores a implementar en el sistema físico. Los resultados experimentales con los controladores seleccionados muestran que el procedimiento de ajuste es eficaz y práctico., [EN] The tuning of Pareto-optimal robust controllers was applied to improve the performance of a helicopter with two-degrees-of-freedom with a linear control algorithm. The tuning procedure is based on the simultaneous minimization of the integral of square sum of errors and the integral of square sum of control action. A 2D Pareto front is built with these integrals. Afterwards, a decision-making process is carried out to select the most preferable controller. Experimental results on the physical platform validate the tuning procedure as practical and reliable., Dirección General de Educación Tecnológica Superior (DGEST), Consejo Nacional de Ciencia y Tecnología (CONACyT), l Ministerio de Economía y Competitividad de España y Consejo Nacional de Desarrollo Científico y Tecnológico de Brasil
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multiobjective evolutionary algorithms for multivariable PI controller design

  • Reynoso Meza, Gilberto
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
A multiobjective optimisation engineering design (MOED) methodology for PI controller tuning in multivariable processes is presented. The MOED procedure is a natural approach for facing multiobjective problems where several requirements and specifications need to be fulfilled. An algorithm based on the differential evolution technique and spherical pruning is used for this purpose. To evaluate the methodology, a multivariable control benchmark is used. The obtained results validate the MOED procedure as a practical and useful technique for parametric controller tuning in multivariable processes., This work was partially supported by the FPI-2010/19 grant and the project PAID-06-11 from the Universitat Politecnica de Valencia and the projects DPI2008-02133, TIN2011-28082 and ENE2011-25900 from the Spanish Ministry of Science and Innovation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Controller tuning by means of multi-objective optimization algorithms: a global tuning framework

  • Reynoso Meza, Gilberto
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Blasco, Xavier|||0000-0002-9737-2833
A holistic multi-objective optimization design technique for controller tuning is presented. This approach gives control engineers greater flexibility to select a controller that matches their specifications. Furthermore, for a given controller it is simple to analyze the tradeoff achieved between conflicting objectives. By using the multi-objective design technique it is also possible to perform a global comparison between different control strategies in a simple and robust way. This approach thereby enables an analysis to be made of whether a preference for a certain control technique is justified. This proposal is evaluated and validated in a nonlinear multiple-input multiple-output system using two control strategies: a classical proportional- integral-derivative control scheme and a feedback state controller., This work was supported in part by the FPI-2010/19 Grant and the Project PAID-06-11 from the Universitat Politecnica de Valencia and in part by the Projects DPI2008-02133, TIN2011-28082, and ENE2011-25900 from the Spanish Ministry of Science and Innovation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparison of design concepts in multi-criteria decision-making using level diagrams

  • Reynoso Meza, Gilberto
  • Blasco, Xavier|||0000-0002-9737-2833
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
[EN] In this work, we address the evaluation of design concepts and the analysis of multiple Pareto fronts in multi-criteria decision-making using level diagrams. Such analysis is relevant when two (or more) design concepts with different design alternatives lie in the same objective space, but describe different Pareto fronts. Therefore, the problem can be stated as a Pareto front comparison between two (or more) design concepts that only differ in their relative complexity, implementation issues, or the theory applied to solve the problem at hand. Such analysis will help the decision maker obtain a better insight of a conceptual solution and be able to decide if the use of a complex concept is justified instead of a simple concept. The approach is validated in a set of multi-criteria decision making benchmark problems. © 2012 Elsevier Inc. All rights reserved., This work was partially supported by the FPI-2010/19 Grant and Project PAID-06-11 from the Universitat Politecnica de Valencia and by Projects ENE2011-25900, TIN2011-28082 (Spanish Ministry of Science and Innovation) and GV/2012/073, PROMETEO/2012/028 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical programming for preference driven evolutionary multi-objective optimization

  • Reynoso Meza, Gilberto
  • Garcia Nieto, Sergio
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Blasco, Xavier|||0000-0002-9737-2833
Preference articulation in multi-objective optimization could be used to improve the pertinency of solutions in an approximated Pareto front. That is, computing the most interesting solutions from the designer's point of view in order to facilitate the Pareto front analysis and the selection of a design alternative. This articulation can be achieved in an a priori, progressive, or a posteriori manner. If it is used within an a priori frame, it could focus the optimization process toward the most promising areas of the Pareto front, saving computational resources and assuring a useful Pareto front approximation for the designer. In this work, a physical programming approach embedded in an evolutionary multi-objective optimization is presented as a tool for preference inclusion. The results presented and the algorithm developed validate the proposal as a potential tool for engineering design by means of evolutionary multi-objective optimization., This work was partially supported by the FPI-2010/19 grant and the PAID-2011/2732 project from the Universitat Polittccnica de Valencia and the projects TIN2011-28082 and ENE2011-25900 from the Spanish Ministry of Economy and Competitiveness.