Skip to main content

MONITORIZACION DE DISTRACCIONES EN CONDUCTORES MEDIANTE UN SISTEMA MULTI-CAMARA

TRA2008-03600

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2008
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD DE ALCALA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Face pose estimation with automatic 3D model creation in challenging scenarios

  • Jiménez Molina, Pedro
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
  • Nuevo Chiquero, Jesús
  • Fernández Alcantarilla, Pablo
This paper proposes a new method to perform real-time face pose estimation for ± 90° yaw rotations and under low light conditions. The algorithm works on the basis of a completely automatic and run-time incremental 3D face modelling. The model is initially made up upon a set of 3D points derived from stereo grey-scale images. As new areas of the subject face appear to the cameras, new 3D points are automatically added to complete the model. In this way, we can estimate the pose for a wide range of rotation angles, where typically 3D frontal points are occluded. We propose a new feature re-registering technique which combines views of both cameras of the stereo rig in a smart way in order to perform a fast and robust tracking for the full range of yaw rotations. The Levenberg–Marquardt algorithm is used to recover the pose and a RANSAC framework rejects incorrectly tracked points. The model is continuously optimised in a bundle adjustment process that reduces the accumulated error on the 3D reconstruction. The intended application of this work is estimating the focus of attention of drivers in a simulator, which imposes challenging requirements. We validate our method on sequences recorded in a naturalistic truck simulator, on driving exercises designed by a team of psychologists., Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Gaze fixation system for the evaluation of driver distractions induced by IVIS

  • Jiménez Molina, Pedro
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
  • Nuevo Chiquero, Jesús
  • Hernández Parra, Noelia|||0000-0002-6644-9498
  • García Daza, Iván|||0000-0001-8940-6434
We present a method to monitor driver distraction based on a stereo camera to estimate the face pose and gaze of a driver in real time. A coarse eye direction is composed of face pose estimation to obtain the gaze and driver's fixation area in the scene, which is a parameter that gives much information about the distraction pattern of the driver. The system does not require any subject-specific calibration; it is robust to fast and wide head rotations and works under low-lighting conditions. The system provides some consistent statistics, which help psychologists to assess the driver distraction patterns under influence of different in-vehicle information systems (IVISs). These statistics are objective, as the drivers are not required to report their own distraction states. The proposed gaze fixation system has been tested on a set of challenging driving experiments directed by a team of psychologists in a naturalistic driving simulator. This simulator mimics conditions present in real driving, including weather changes, maneuvering, and distractions due to IVISs. Professional drivers participated in the tests., Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Face tracking with automatic model construction

  • Nuevo Chiquero, Jesús
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
  • Fernández Llorca, David|||0000-0003-2433-7110
  • Ocaña Miguel, Manuel|||0000-0002-8875-1866
This paper describes an active model with a robust texture model built on-line. The model uses one camera and it is able to operate without active illumination. The texture model is defined by a series of clusters, which are built in a video sequence using previously encountered samples. This model is used to search for the corresponding element in the following frames. An on-line clustering method, named leaderP is described and evaluated on an application of face tracking. A 20-point shape model is used. This model is built offline, and a robust fitting function is used to restrict the position of the points. Our proposal is to serve as one of the stages in a driver monitoring system. To test it, a new set of sequences of drivers recorded outdoors and in a realistic simulator has been compiled. Experimental results for typical outdoor driving scenarios, with frequent head movement, turns and occlusions are presented. Our approach is tested and compared with the Simultaneous Modeling and Tracking (SMAT) [1], and the recently presented Stacked Trimmed Active Shape Model (STASM) [2], and shows better results than SMAT and similar fitting error levels to STASM, with much faster execution times and improved robustness., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Ministerio de Educación y Ciencia
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Non-linearity analysis of depth and angular indexes for optimal stereo SLAM

  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
  • Fernández Alcantarilla, Pablo
  • Schleicher Gómez, David
In this article, we present a real-time 6DoF egomotion estimation system for indoor environments using a wide-angle stereo camera as the only sensor. The stereo camera is carried in hand by a person walking at normal walking speeds 3–5 km/h. We present the basis for a vision-based system that would assist the navigation of the visually impaired by either providing information about their current position and orientation or guiding them to their destination through different sensing modalities. Our sensor combines two different types of feature parametrization: inverse depth and 3D in order to provide orientation and depth information at the same time. Natural landmarks are extracted from the image and are stored as 3D or inverse depth points, depending on a depth threshold. This depth threshold is used for switching between both parametrizations and it is computed by means of a non-linearity analysis of the stereo sensor. Main steps of our system approach are presented as well as an analysis about the optimal way to calculate the depth threshold. At the moment each landmark is initialized, the normal of the patch surface is computed using the information of the stereo pair. In order to improve long-term tracking, a patch warping is done considering the normal vector information. Some experimental results under indoor environments and conclusions are presented., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

RSMAT: Robust Simultaneous Modeling and Tracking

  • Nuevo Chiquero, Jesús
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
  • Jiménez Molina, Pedro
This paper describes a robust on-line appearance modeling and tracking method, based on simultaneous modeling and tracking (SMAT). The appearance model is defined by a series of clusters, built in a video sequence using previously encountered samples. This model is used to search for the corresponding element in the following frames. Three alternative incremental clustering methods are proposed to increase the robustness and description capabilities of the model. The proposal is evaluated on an application of face tracking for driver monitoring. The test set comprises sequences of drivers recorded outdoors and in a truck simulator, which contain examples of occlusions and self-occlusions, as well as illumination changes. The performance is evaluated and compared with that of the original SMAT proposal and the recently presented stacked trimmed active shape model (STASM). Our proposal shows better results than the original SMAT and similar fitting error levels to STASM, with much faster execution times and better robustness to self-occlusions., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Ministerio de Educación y Ciencia