Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Portland cement systems with addition of sewage sludge ash. Application in concretes for the manufacture of blocks

  • Baeza-Brotons, Francisco
  • Garces, Pedro
  • Paya, Jordi
  • Saval, José Miguel
This study analyzes the viability of using sewage sludge ash (SSA) as a raw material in the composition of concrete, with a similar dosage to when it is used to manufacture blocks, therefore, with dry consistency given the type of the industrial process of these precast. These ashes are a serious problem, so their valorization in a sector like construction, with a high demand of resources, would be a great advantage from an economic and environmental perspective. A scale with the percentages of addition of ash in relation to cement (5, 10, 15 and 20%) was designed and the replacement of sand by this material, as well as the addition of an inert material such as marble dust. For a better understanding about how these mixtures behave in other cementitious systems, thermogravimetric analysis were performed on pastes with curing ages of 7, 28 and 90 d, and physical and mechanical tests on mortars cured for 28 and 90 d. It was proved that the addition of SSA in concrete used for manufacturing blocks cured for 28 d provided densities and resistances similar to the control sample (without SSA) and significantly reduces the water absorption. The replacement of sand by the mineral addition significantly improves the parameters mentioned above., This research was financed by the University of Alicante through Projects VIGROB-256 and GRE10-28 and by Generalitat Valenciana through project GV/2012/113.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effects of Using Mine Tailings from La Unión (Spain) in Hot Bituminous Mixes Design

  • Tenza-Abril, Antonio José
  • Saval, Jose Miguel
  • Garcia-Vera, Victoria Eugenia
  • Miguel Solak, Afonso
  • Marcos Ortega, José
  • Real-Herraiz, Teresa Pilar|||0000-0003-2578-2902
[EN] Currently, political policies aimed at curbing the abuse of natural resources have given rise to a conscientiousness leading to the reevaluation of wastes. Wastes generated from previous mining operations greatly impact the environment, often leaving a legacy of elevated concentrations of heavy metals in the surrounding soil and water. In this study, two types of waste from the mining district of La Union (Spain) were used to study their use as a component of road wearing courses. The physical and mechanical characteristics were determined to identify the optimal content of bitumen, as well as the fatigue resistance using the four-point beam fatigue test, in all the mixtures manufactured. The mine tailings exhibited adequate physical and mechanical properties to be utilized as a coarse aggregate for a wearing course. The results indicate that one of the studied mine tailing forms could be used as a wearing course component, since it has properties similar to a control mix that is typically used in wearing course construction., This work was financed by the University of Alicante through Projects VIGROB-256 and GRE10-28 and by the Valencian Community through project GV/2012/113.