Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design and mechanics of stackable auxetic S-shaped structures

  • Rufo-Martin, Celia
  • Diaz-Alvarez, Jose
  • Miguelez, Maria Henar
  • Youssef, George
  • Infante-García, Diego|||0000-0001-6010-2031
[EN] The emerging auxetic lattices, driven by contemporary advancements in additive manufacturing, have garnered significant attention, with an emphasis on improving structural performance and energy absorption efficiencies while mitigating the contributions of material nonlinearities and instabilities. This research advances the state of the art of thin-strut auxetic structures by introducing a stacking schema to realize 3D S-shaped polystructures with rigid-body motion-dominated deformation, spatial symmetry, and persistent auxeticity. Several generations of these polystructures were 3D printed using vat photopolymerization with varying strut thickness ranging from 1 mm to 3 mm. The additively manufactured structures were mechanically tested under quasi-static and impact loading scenarios, providing physical evidence for the foreseen structural behaviors discussed above. The polystructures yielded load-bearing-to-mass ratios of 4.6 kN/kg, 7.6 kN/kg, and 12.3 kN/kg for t1, t2, and t3, respectively, with less than 10 g of weight, a result of the rigid body motion and the asymmetric rotation of the polystructure beams. Additionally, the impact response highlighted a structure-to-material transition, resulting in similar force maxima for t1 and t2, with 9 and 10 N (structure-dominated), whereas t3 reported a force of up to 49 N (material-dominated). However, irrespective of the strut thickness, the negative Poisson's ratio remained nearly unchanged (-0.22 +/- 0.02), exemplifying the importance of the structural mechanics substantiated by the specific topological design of S-shaped unit cells. The research findings paved the way for the translational potential of S-shaped polystructures in practical applications for mitigating impact, including civilian and military loading conditions., The authors acknowledge the support of the National Science Foundation under Grant No. 2035663 (G.Y.) . Funding from the U.S. Department of Defense (W911NF1410039, W911NF1810477, W911NF2310150, and N00174-23-1-0009) is also acknowledged. The authors are also grateful for internal funding from San Diego State University and Universidad Carlos III de Madrid. In particular, this work was supported by the MCIN/AEI/10.13039/501100011033 and "European Union NextGenerationEU/PRTR" under grant PDC2021-121368-C21; the MCIN/AEI/10.13039/501100011033 under grants PID2020-112628RA-I00 and PID2020-118480RB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploring mechanistic anomalies in additively manufactured structures

  • Youssef, George
  • Alvarez-Blanco, Mario
  • Rufo-Martin, Celia
  • Marco, Miguel
  • Infante-García, Diego|||0000-0001-6010-2031
[EN] The increasing prevalence of additive manufacturing with material extrusion necessitates a rigorous understanding of the process-property-performance relationship in 3D-printed polymers, particularly the consistency of mechanical properties despite manufacturing anomalies. This study experimentally and analytically investigates the variability in stiffness and tensile strength of polylactic acid (PLA) samples fabricated as flat layers and isogrids. Experimental tensile testing revealed comparable stiffness and strength across most configurations, irrespective of manufacturing-induced anomalies. Analytical models that were statistically penalized to account for manufacturing variability, considering randomized cross-sectional areas, demonstrated excellent agreement with the experimentally determined stiffness variability. Furthermore, the tensile strength of the flat layer was accurately predicted using the Tresca criterion, while Cohesive Zone Modelling effectively captured the failure behavior of the isogrid. Despite its linear assumptions, this integrated experimental-statistical framework offers a viable approach for predicting the mechanical response and assessing the reliability of additively manufactured components., The authors acknowledge the support of the National Science Foundation under Grant No. 2035663. They are also grateful for internal funding from San Diego State University and Universidad Carlos III de Madrid. Funding from the Department of Defense (W911NF1410039, W911NF1810477, W911NF2310150, and N00174-23-1-0009) is also acknowledged. George Youssef also acknowledges funding from the US-Spain Fulbright program. The authors gratefully acknowledge the funding support received from the Spanish Ministerio de Ciencia e Innovacion for funding the project PID2020-112628RA-I00/AEI/10.13039/501100011033. The authors are grateful to Dr. Cristina Moral for her exceptional assistance with the scanning electron microscope.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Printable and Tunable Bioresin with Strategically Decorated Molecular Structures

  • Rufo-Martín, Celia
  • Díaz-Álvarez, José
  • Miguélez, Henar
  • Youssef, George
  • Infante-García, Diego|||0000-0001-6010-2031
[EN] As personalized medicine rapidly evolves, there is a critical demand for advanced biocompatible materials surpassing current additive manufacturing capabilities. This study presents a novel printable bioresin engineered with tunable mechanical, thermal, and biocompatibility properties through strategic molecular modifications. The study introduces a new bioresin comprising methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDMA), and a photoinitiator, which is further enhanced by incorporating high molecular weight polymethyl methacrylate (PMMA) to improve biostability and mechanical performance. The integration of printable PMMA presents several synthesis and processing challenges, necessitating substantial modifications to the 3D printing process. Additionally, the bioresin is functionalized with antibacterial silver oxide and bone-growth-promoting hydroxyapatite at various weight ratios to extend its application further. The results demonstrate the agile printability of the novel bioresin and its potential for transformative impact in biomedical applications, offering a versatile material platform for additive manufacturing-enabled personalized medicine. This work highlights the adaptability of the novel printable bioresin for real-life applications and its capacity for multiscale structural tailoring, potentially achieving properties comparable to native tissues and extending beyond conventional additive manufacturing techniques., The authors acknowledge the support of the National Science Foundation under Grant No. 2035663. The authors are also grateful for internal funding from San Diego State University. Funding from the United States Department of Defense (W911NF1410039, W911NF1810477, W911NF2310150, and N00174-23-1-0009) is also acknowledged. Additionally, this work was supported by the MCIN/AEI/10.13039/501100011033 and "European Union NextGenerationEU/PRTR" under grant PDC2021-121368-C21; the MCIN/AEI/10.13039/501100011033 under grants PID2020-112628RA-I00 and PID2020-118480RB-C22; and by the Generalitat Valenciana under grant CIAPOS/2021/271.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development, 3D printing, and mechanics of novel auxetic unit cell monostructures

  • Rufo-Martín, Celia
  • Díaz-Álvarez, José
  • Miguélez, María Henar
  • Koohbor, Behrad
  • Youssef, George
  • Infante-García, Diego|||0000-0001-6010-2031
[EN] Complex structures with unique mechanics are pivotal to advancing additive manufacturing, enabling applications where traditional methods are impractical. This study presents a novel 3D auxetic S-shaped monostructure designed for scalability, tunability, and printability using vat photopolymerization. Unit cell geometries were fabricated and experimentally evaluated under quasi-static loading conditions, with full-field analyses providing insights into their structural performance. Benchmarking against common auxetic structures (re-entrant and star topologies) highlighted the superior capabilities of the proposed design. The S-shaped monostructures exhibited geometric insensitivity in their force-displacement responses, with a stiffness of similar to 180 N/m, withstanding large displacements of 11 mm without fracture or self-contact and supporting forces up to 1.8 N (i.e., 95 times their weight) before fully recovering upon unloading. Computational and experimental results demonstrated robust spatial auxeticity, persisting up to 85 % of axial global displacement due to geometry-driven rigid body motion, independent of base material properties. The S-shaped structures achieved superior auxetic performance (nu(maxti) approximate to -0.43) compared to re-entrant (nu(maxti) approximate to -0.30) and star (nu(maxti) approximate to - 0.05) counterparts, with a monotonic and reversible auxetic response throughout loading. Strain contour analyses from digital image correlation validated the reduced stress concentrations and rigid body-dominated mechanism. The exceptional auxeticity and mechanical resilience of the S-shaped monostructures suggest promising applications in advanced designs, including 3D stackable configurations for impact mitigation applications., The authors acknowledge the support of the National Science Foundation under Grant No. 2035663 (G.Y.) and Grant No. 2035660 (B. K.) . The authors are also grateful for internal funding from San Diego State University, Rowan University, and Universidad Carlos III de Madrid. In particular, this work was supported by the MCIN/AEI/10.13039/501100011033 and "European Union NextGenerationEU/PRTR" under grant PDC2021-121368-C21; the MCIN/AEI/10.13039/501100011033 under grants PID2020-112628RA-I00 and PID2020-118480RB-C22. Funding from the U.S. Department of Defense (W911NF1410039, W911NF1810477, W911NF2310150, and N00174-23-1-0009) is also acknowledged.