Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Numerical analysis of an optimal metal wool-phase change material for thermal energy storage with exceptionally high power density

  • Ribezzo, Alessandro
  • Morciano, Matteo
  • Zsembinszki, Gabriel
  • Mani Kala, Saranprabhu
  • Borri, Emiliano
  • Bergamasco, Luca
  • Fasano, Matteo
  • Chiavazzo, Eliodoro
  • Prieto, Cristina
  • Cabeza, Luisa F.
The adoption of thermal energy storage (TES) systems based on phase change material (PCM) remains limited by their low thermal conductivity, which restricts power density. Existing heat transfer enhancement techniques are often costly or come with significant drawbacks, leaving a gap for an effective and affordable solution. This study highlights metal wool as a promising alternative, offering low cost, ease of application, and retrofitting potential. While previous experiments demonstrated substantial improvements in power density using copper wool, a comprehensive numerical model to further optimize this technique is presented here. The model, incorporating CFD simulations and uncertainty analysis, was validated for bulk PCM and two copper wool-PCM composites before being extended to a wool material analysis. First, possible alternatives to copper as wool material were tested, highlighting aluminum as a viable candidate. Then, the proposed composite was found to match the discharging performance of a PCM with an effective thermal conductivity of 2.5 W/mK, a value rarely achieved by conventional enhancement techniques. Additionally, a techno-economic comparison revealed that copper wool delivered a 14.7-fold increase in thermal conductivity relative to liquid PCM at ¿6 per kg of PCM additivated¿a performance unmet by metal foams and nanocomposites. These findings confirm metal wool as a viable cost-effective and high-performance solution for improving TES systems, partially bridging the gap between efficiency and affordability., A.R. and E.C. acknowledge funding under the National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 1.3—Call for tender No. 1561 of 11.10.2022 of Ministero dell’Università e della Ricerca (MUR); funded by the European Union—NextGenerationEU. This work was partially funded by the Ministerio de Ciencia e Innovacion’ - Agencia Estatal de Investigacion’ (AEI) (PID2021-123511OB-C31-MCIN/AEI/10.13039/501100011033/ FEDER, UE and RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Department de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/ 10.13039/501100011033 and FSE+. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101036910
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Development of copper metal wool incorporated in a latent thermal energy storage tank for improved charging and discharging

  • Mani Kala, Saranprabhu
  • Ribezzo, Alessandro
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
  • Cabeza, Luisa F.
The thermal energy storage tank is an essential component of a conventional thermal energy storage system. Nevertheless, low charging and discharging rates is one of the different problems associated with them. Many research studies were conducted to improve the charging and discharging characteristics of thermal energy storage tanks. Those include the addition of nanoparticles, heat pipes, metal foams, and encapsulation of the phase change material. Even though those approaches improved the thermal performance of the storage tank, they also promoted some problems, like nanoparticle deposition, suppression of natural convection, and reduced energy density. This study, used a different approach to improve the thermal performance, integrating copper metal wool of two discrete thicknesses perpendicular to the heat transfer fluid carrying tubes. Accordingly, with two different packaging factor four different configurations of metal wool-packed tanks were developed and compared against the reference, i.e., a conventional shell and tube tank. The thermal performance of the developed cases was tested using a custom-built test rig. The integration of copper metal wool reduced the charging and discharging time significantly. However, the fully stacked fine fibre wool packed tank showed a remarkable 85% reduction in solidification time and a 37.4% reduction in melting time compared to the conventional shell and tube tank. Moreover, it showed a higher mean power than all the developed cases, with 414% enhancement during the discharging cycle and 42% during the charging cycle. Thus, the incorporation of metal wool into a tank is an effective way to enhance its thermal performance., This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement N. 101036910 (StoRIES). This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31- MCIN/AEI/10.13039/501100011033/FEDER, UE and RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Innovative refractory concrete for high temperature thermal energy storage

  • Castro Chicot, José Ramón
  • Santini, Carolina
  • Zsembinszki, Gabriel
  • Mani Kala, Saranprabhu
  • Martínez, Franklin R.
  • Risco Amigó, Santiago
  • Fabiani, Claudia
  • Pisello, Anna Laura
  • Cabeza, Luisa F.
Thermal energy storage (TES) systems play an important role in the management of thermal energy and associated consumption. Furthermore, using TES, combustion of fossil fuels and their associated environmental impacts are avoided. In particular, demand for high temperature energy storage is increasing and research focuses on the development of suitable materials for these applications. A limited number of studies focus on the use of sensible heat storage systems that exploit concrete as a TES under high temperature conditions for concentrating solar power (CSP) plant systems. The main drawback to overcome in concrete TES is the degradation of the concrete after charging and discharging thermal cycles. This study aims to develop a novel concrete formulation designed for high-temperature applications and capable of withstanding thermal cycling. To achieve this, a refractory concrete was conceptualized using calcium aluminate cement (CAC) and refractory aggregates, specifically basalt and chamotte. The formulation also incorporates a heat treatment applied after the cu[[ring period to enhance its performance under extreme thermal conditions. This heat treatment is what allows to transform a CAC concrete, that unites the dispersed material through hydraulic nodes, into a refractory concrete, that unites the dispersed material through its ceramisation. The new concrete formulation was analysed to evaluate its performance before and after 25 thermal cycles. Results show that thermal conductivity and compressive strength after ceramisation have values around 1.7 W/m⋅K and 52 MPa, respectively. It was also observed that the initial thermal treatment was not necessary, because the ceramisation of the concrete can also be achieved during the thermal cycling process if the correct heating and cooling rates are used. The developed new concrete formulation containing refractory aggregates demonstrated excellent thermo-physical and mechanical properties that make it suitable for high-temperature TES applications (temperatures up to 700 ◦C)., This project has received funding from the European Union's Horizon 2020 Research and Innovation Programme under Grant Agreement 101036910 (StoRIES). This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31- MCIN/AEI/10.13039/501100011033/FEDER, UE and RED2022-134219-T). This study received funding from the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through the PCI2020-120695-2 project and the European Union “NextGenerationEU"/PRTR". The authors from University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This work was partially funded by the European Union—NextGenerationEU under Italian Ministry of University and Research (MUR) National Innovation Ecosystem grants ECS00000041— VITALITY—CUP J97G22000170005 and CUP B43C22000470005. The authors thank the PhD school in Energy and Sustainable Development at CIRIAF University of Perugia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical analysis of an optimal metal wool-phase change material for thermal energy storage with exceptionally high power density

  • Ribezzo, Alessandro
  • Morciano, Matteo
  • Zsembinszki, Gabriel
  • Mani Kala, Saranprabhu
  • Borri, Emiliano
  • Bergamasco, Luca
  • Fasano, Matteo
  • Chiavazzo, Eliodoro
  • Prieto, Cristina
  • Cabeza, Luisa F.
The adoption of thermal energy storage (TES) systems based on phase change material (PCM) remains limited by their low thermal conductivity, which restricts power density. Existing heat transfer enhancement techniques are often costly or come with significant drawbacks, leaving a gap for an effective and affordable solution. This study highlights metal wool as a promising alternative, offering low cost, ease of application, and retrofitting potential. While previous experiments demonstrated substantial improvements in power density using copper wool, a comprehensive numerical model to further optimize this technique is presented here. The model, incorporating CFD simulations and uncertainty analysis, was validated for bulk PCM and two copper wool-PCM composites before being extended to a wool material analysis. First, possible alternatives to copper as wool material were tested, highlighting aluminum as a viable candidate. Then, the proposed composite was found to match the discharging performance of a PCM with an effective thermal conductivity of 2.5 W/mK, a value rarely achieved by conventional enhancement techniques. Additionally, a techno-economic comparison revealed that copper wool delivered a 14.7-fold increase in thermal conductivity relative to liquid PCM at ¿6 per kg of PCM additivated¿a performance unmet by metal foams and nanocomposites. These findings confirm metal wool as a viable cost-effective and high-performance solution for improving TES systems, partially bridging the gap between efficiency and affordability., A.R. and E.C. acknowledge funding under the National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 1.3—Call for tender No. 1561 of 11.10.2022 of Ministero dell’Università e della Ricerca (MUR); funded by the European Union—NextGenerationEU. This work was partially funded by the Ministerio de Ciencia e Innovacion’ - Agencia Estatal de Investigacion’ (AEI) (PID2021-123511OB-C31-MCIN/AEI/10.13039/501100011033/ FEDER, UE and RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Department de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/ 10.13039/501100011033 and FSE+. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101036910
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development of copper metal wool incorporated in a latent thermal energy storage tank for improved charging and discharging

  • Mani Kala, Saranprabhu
  • Ribezzo, Alessandro
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
  • Cabeza, Luisa F.
The thermal energy storage tank is an essential component of a conventional thermal energy storage system. Nevertheless, low charging and discharging rates is one of the different problems associated with them. Many research studies were conducted to improve the charging and discharging characteristics of thermal energy storage tanks. Those include the addition of nanoparticles, heat pipes, metal foams, and encapsulation of the phase change material. Even though those approaches improved the thermal performance of the storage tank, they also promoted some problems, like nanoparticle deposition, suppression of natural convection, and reduced energy density. This study, used a different approach to improve the thermal performance, integrating copper metal wool of two discrete thicknesses perpendicular to the heat transfer fluid carrying tubes. Accordingly, with two different packaging factor four different configurations of metal wool-packed tanks were developed and compared against the reference, i.e., a conventional shell and tube tank. The thermal performance of the developed cases was tested using a custom-built test rig. The integration of copper metal wool reduced the charging and discharging time significantly. However, the fully stacked fine fibre wool packed tank showed a remarkable 85% reduction in solidification time and a 37.4% reduction in melting time compared to the conventional shell and tube tank. Moreover, it showed a higher mean power than all the developed cases, with 414% enhancement during the discharging cycle and 42% during the charging cycle. Thus, the incorporation of metal wool into a tank is an effective way to enhance its thermal performance., This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement N. 101036910 (StoRIES). This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31- MCIN/AEI/10.13039/501100011033/FEDER, UE and RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Innovative refractory concrete for high temperature thermal energy storage

  • Castro Chicot, José Ramón
  • Santini, Carolina
  • Zsembinszki, Gabriel
  • Mani Kala, Saranprabhu
  • Martínez, Franklin R.
  • Risco Amigó, Santiago
  • Fabiani, Claudia
  • Pisello, Anna Laura
  • Cabeza, Luisa F.
Thermal energy storage (TES) systems play an important role in the management of thermal energy and associated consumption. Furthermore, using TES, combustion of fossil fuels and their associated environmental impacts are avoided. In particular, demand for high temperature energy storage is increasing and research focuses on the development of suitable materials for these applications. A limited number of studies focus on the use of sensible heat storage systems that exploit concrete as a TES under high temperature conditions for concentrating solar power (CSP) plant systems. The main drawback to overcome in concrete TES is the degradation of the concrete after charging and discharging thermal cycles. This study aims to develop a novel concrete formulation designed for high-temperature applications and capable of withstanding thermal cycling. To achieve this, a refractory concrete was conceptualized using calcium aluminate cement (CAC) and refractory aggregates, specifically basalt and chamotte. The formulation also incorporates a heat treatment applied after the cu[[ring period to enhance its performance under extreme thermal conditions. This heat treatment is what allows to transform a CAC concrete, that unites the dispersed material through hydraulic nodes, into a refractory concrete, that unites the dispersed material through its ceramisation. The new concrete formulation was analysed to evaluate its performance before and after 25 thermal cycles. Results show that thermal conductivity and compressive strength after ceramisation have values around 1.7 W/m⋅K and 52 MPa, respectively. It was also observed that the initial thermal treatment was not necessary, because the ceramisation of the concrete can also be achieved during the thermal cycling process if the correct heating and cooling rates are used. The developed new concrete formulation containing refractory aggregates demonstrated excellent thermo-physical and mechanical properties that make it suitable for high-temperature TES applications (temperatures up to 700 ◦C)., This project has received funding from the European Union's Horizon 2020 Research and Innovation Programme under Grant Agreement 101036910 (StoRIES). This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31- MCIN/AEI/10.13039/501100011033/FEDER, UE and RED2022-134219-T). This study received funding from the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through the PCI2020-120695-2 project and the European Union “NextGenerationEU"/PRTR". The authors from University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This work was partially funded by the European Union—NextGenerationEU under Italian Ministry of University and Research (MUR) National Innovation Ecosystem grants ECS00000041— VITALITY—CUP J97G22000170005 and CUP B43C22000470005. The authors thank the PhD school in Energy and Sustainable Development at CIRIAF University of Perugia.