Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Evaluation of extreme temperature events in the Iberian Peninsula based on Copernicus CERRA reanalysis

  • González Nieto, Ana
  • Pereira, Humberto
  • Álvarez Fernández, María Inés
  • Picado, Ana
  • Lorenzo González, María de las Nieves
  • Dias, João Miguel
Climate change has intensified extreme temperature events (ETEs), jeopardizing water resources, agriculture, and human health. Monitoring surface air temperature with comprehensive datasets is crucial, given the spatial and temporal limitations of in situ data. This study evaluates the recent Copernicus European Regional Reanalysis (CERRA) product to investigate unusually high (heatwaves) or low (cold spells) temperatures over the Iberian Peninsula (IP) during two extended seasons. The assessment was performed with daily maximum and minimum air temperatures from 12 stations in mainland Portugal for 2000− 2020, and from a high-resolution gridded dataset covering continental Spain and the Balearic Islands for 1985− 2020. Several metrics describing the number, frequency, duration, amplitude, and magnitude of hot and cold extreme events were assessed. CERRA exhibits good performance, with a cold bias for maximum and a warm bias for minimum air temperature. It tends to underestimate the frequency, duration, and intensity of heatwaves, Nevertheless, both the observations and CERRA identify the southwestern and interior regions of the IP as the most impacted whereas northern and coastal areas experience fewer and weaker heatwaves. Regarding cold spells, CERRA reproduces the general spatial gradient and the effects of orography, though it slightly underestimates their intensity and duration. The study of ETEs is highly relevant to the IP economy, especially agriculture, health, energy, and tourism, making their understanding crucial for mitigation and adaptation. The ability of CERRA to capture key ETEs features makes it a valuable dataset for evaluating health or agricultural models for the IP., Fundação para a Ciência e a Tecnologia | Ref. UID/50017/2025, Fundação para a Ciência e a Tecnologia | Ref. LA/P/0094/2020, Xunta de Galicia | Ref. ED431C 2021/44, Xunta de Galicia | Ref. ED431B 2025/31, Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. PID2024-156356OB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A digital-twin LiDAR simulator for performance assessment of railway ballast geometry inspections

  • Ríos Otero, Eduardo
  • Aldao Pensado, Enrique
  • Fernández-Pardo, L.M.
  • Fontenla Carrera, Gabriel
  • Veiga López, Fernando
  • González Jorge, Higinio
High-speed railways are increasingly preferred for medium-distance travel, thanks to their efficiency and convenience. However, the growing frequency of services accelerates infrastructure wear, raising inspection and maintenance demands. To address this, autonomous inspection solutions based on LiDAR (Light Detection and Ranging) systems and onboard cameras have recently been proposed, but their testing and deployment remain challenging due to regulatory constraints and the difficulty of accessing representative railway environments. This work presents a LiDAR digital twin that realistically replicates sensor behaviour in real railway track environments. The simulator incorporates CAD (Computer-Aided Design) models of the track vehicle and sensor installation, enabling the assessment of installation-related limitations and sensor field-of-view occlusions. Two commercial sensors, the Livox Avia and Livox HAP, were metrologically calibrated using experimental data acquired on a real railway track. Good agreement between simulated and experimental data was observed, with deviations of only 2 points/cm in point density and centimetre-level differences in reconstructed ballast geometry. The digital twin was subsequently used to assess the suitability of this technology for ballast geometry measurement at different travel speeds, showing centimetre-order errors for both sensors at speeds of up to 120 km/h., Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PID2024-156356OB-I00, Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Xunta de Galicia | Ref. GPC-ED431B 2025/31, Agencia Estatal de Investigación | Ref. CPP2022-009679
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Learning heuristics with Vision Transformers for risk-aware drone last-mile delivery

  • Aldao Pensado, Enrique
  • Veiga López, Fernando
  • Chanel, Caroline P.C.
  • Watanabe, Yoko
  • González Jorge, Higinio
for urban parcel transport, offering a sustainable and cost-effective alternative to traditional ground-based logistics. Such operations, however, introduce significant risks, requiring effective mitigation strategies and efficient path-planning tools. Risk-aware path planning in complex urban environments remains computationally demanding, as it involves a highly combinatorial sequential decision-making problem while requiring efficient online replanning to ensure reactivity. Efficient planners often rely on graph-based search methods, in which the heuristic used to guide the search plays a crucial role. However, in risk-aware path planning, heuristic estimation is particularly challenging, as risk evaluation forms part of the cost estimation and differs significantly from classical line-of-sight or Euclidean approaches. To address this limitation, this study presents a novel Deep Learning framework for estimating accurate and admissible heuristic functions in risk-aware UAV path planning. To this end, a comprehensive database of cost-to-go maps was generated using realistic 3D urban scenarios and a graph-based optimisation framework. This dataset was used to train a Vision Transformer (ViT) network capable of providing accurate cost-to-go estimates for various objective-function configurations. The proposed architecture incorporates an admissibility correction mechanism that regulates the trade-off between heuristic accuracy and admissibility, promoting either solution optimality or search efficiency. The method was benchmarked against conventional heuristics in terms of computation time and cost-to-go. Results show speed-ups of up to 20 times compared to traditional approaches while maintaining near-optimal solutions, with marginal increases in average path cost of the order of 0.1%., Agencia Estatal de Investigación | Ref. PID2024-156356OB-I00, Agencia Estatal de Investigación | Ref. CPP2022-009679, Ministerio de Ciencia, Innovación y Universidades | FPU21/ 01176, Xunta de Galicia | Ref. FEADER2024/052B, Xunta de Galicia | Ref. ED431B 2025/31, Ministerio de Defensa | Ref. 2019 65 0090004707501, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Towards safer UAV operations in urban air mobility: 3D automated modelling for CFD-based microweather systems

  • Aldao Pensado, Enrique
  • Veiga Piñeiro, Gonzalo
  • Domínguez Estévez, Pablo
  • Martín Ortega, Elena Beatriz
  • Veiga López, Fernando
  • Fontenla Carrera, Gabriel
  • González Jorge, Higinio
Turbulence and wind gusts pose significant risks to the safety and efficiency of UAVs (uncrewed aerial vehicles) in urban environments. In these settings, wind dynamics are strongly influenced by interactions with buildings and terrain, giving rise to small-scale phenomena such as vortex shedding and gusts. These wind speed oscillations generate unsteady forces that can destabilise UAV flight, particularly for small vehicles. Additionally, predicting their formation requires high-resolution Computational Fluid Dynamics (CFD) models, as current weather forecasting tools lack the resolution to capture these phenomena. However, such models require 3D representations of study areas with high geometric consistency and detail, which are not available for most cities. To address this issue, this work introduces an automated methodology for urban CFD mesh generation using open-source data. The proposed method generates error-free meshes compatible with OpenFOAM and includes tools for geometry modification, enhancing solver convergence and enabling adjustments to mesh complexity based on computational resources. Using this approach, CFD simulations are conducted for the city of Ourense, followed by an analysis of their impact on UAV operations and the integration of the system into a trajectory optimisation framework. The CFD model is also validated using experimental anemometer measurements., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. CPP2022-009679, Agencia Estatal de Investigación | Ref. FPU21/01176
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

An Integrated force assessment and disturbance compensation framework for stable UAV-based water-jet cleaning

  • Martínez Alonso, Gálata
  • Aldao Pensado, Enrique
  • Veiga López, Fernando
  • González Jorge, Higinio
Uncrewed aerial vehicles (UAVs) represent a promising alternative for building facade cleaning, improving efficiency while reducing the risks associated with working at height. However, such operations are particularly challenging due to the reaction forces generated by fluid discharge, which can compromise UAV stability and reduce cleaning accuracy. To mitigate this issue, this work proposes an integrated methodology for the preliminary assessment of UAV-based water-jet facade cleaning operations. First, a Computational Fluid Dynamics (CFD) model is developed to characterize jet-induced forces as a function of nozzle parameters and stand-off distance. The proposed force estimation model is evaluated experimentally at one low-pressure operating condition through flight tests using a commercial water-jet cleaning system. These disturbance forces are then incorporated into an over-actuated UAV dynamic model, together with a disturbance-aware compensation strategy, enabling the evaluation of vehicle stability and trajectory tracking under the simulated operating conditions. In parallel, a trajectory generation and operational planning framework is proposed, allowing systematic coverage of facades while maintaining the prescribed stand-off distances. The proposed framework is evaluated through nine simulation scenarios considering different flow rates and disturbance levels. The results demonstrate accurate trajectory tracking, with RMS errors below 3.4 cm across all cases, while the proposed disturbance compensation strategy reduces the RMS tracking error by approximately 67% compared with a non-compensated configuration. The results highlight the potential of UAV-based water-jet systems for autonomous and efficient facade maintenance, while also illustrating the importance of accounting for jet-induced disturbances in the control design., Agencia Estatal de Investigación | Ref. PID2024-156356OB-I00, Agencia Estatal de Investigación | Ref. CPP2022-009679, Ministerio de Ciencia, Innovación y Universidades | Ref. FPU21/01176, Xunta de Galicia | Ref. ED431B 2025/31