Pasar al contenido principal

Sistema de inspección ferroviaria adaptativo e inteligente (AIRIS)

CPP2022-009679

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos en Colaboración Público-Privada
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario SA DE OBRAS Y SERVICIOS COPASA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Dynamic UAV trajectory optimisation for parcel delivery with integrated third-party risk mitigation

  • Aldao Pensado, Enrique
  • Veiga López, Fernando
  • Chanel, Caroline P.C.
  • Watanabe, Yoko
  • González Jorge, Higinio
Last-mile delivery by Uncrewed Aerial Vehicles (UAVs) is an emerging solution for urban parcel transport, offering a sustainable and cost-effective alternative to traditional ground-based logistics. However, these operations introduce significant Third-Party Risk (TPR), necessitating comprehensive safety assessments. Evaluating UAV TPR in urban environments is particularly challenging due to the complexity of such settings, where factors like population density, urban geometry, and UAV behaviour must be carefully considered. Recent studies have developed analytical models for UAV risk assessment, but these often rely on oversimplified assumptions. For instance, many models focus primarily on total power loss scenarios while neglecting other critical failure modes, such as sensor malfunctions or flight controller errors. Additionally, existing models frequently overlook the impact of urban geometry in crash simulations, relying instead on constant shelter factors. This oversight can lead to inaccurate risk estimations, as buildings, roads, and other structures significantly influence collision probabilities and third-party exposure. To address these limitations, this study introduces a novel UAV failure simulation framework that realistically models aircraft responses to the most common UAV hardware failures. A UAV simulator is employed to generate probabilistic failure trajectories, which are then used to assess third-party exposure within a detailed 3D digital urban environment. This TPR assessment is integrated into a multi-objective optimisation framework based on a k-Non Aligned Nearest Neighbours (k-NANN) approach. Compared to traditional grid-based path planning methods, this approach generates safer and more efficient trajectories, reducing operational risk by up to 30% and flight time by 20%., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. TED2021-129757B-C3, Agencia Estatal de Investigación | Ref. CPP2022-009679, Xunta de Galicia | Ref. FEADER 2024/052B
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A digital-twin LiDAR simulator for performance assessment of railway ballast geometry inspections

  • Ríos Otero, Eduardo
  • Aldao Pensado, Enrique
  • Fernández-Pardo, L.M.
  • Fontenla Carrera, Gabriel
  • Veiga López, Fernando
  • González Jorge, Higinio
High-speed railways are increasingly preferred for medium-distance travel, thanks to their efficiency and convenience. However, the growing frequency of services accelerates infrastructure wear, raising inspection and maintenance demands. To address this, autonomous inspection solutions based on LiDAR (Light Detection and Ranging) systems and onboard cameras have recently been proposed, but their testing and deployment remain challenging due to regulatory constraints and the difficulty of accessing representative railway environments. This work presents a LiDAR digital twin that realistically replicates sensor behaviour in real railway track environments. The simulator incorporates CAD (Computer-Aided Design) models of the track vehicle and sensor installation, enabling the assessment of installation-related limitations and sensor field-of-view occlusions. Two commercial sensors, the Livox Avia and Livox HAP, were metrologically calibrated using experimental data acquired on a real railway track. Good agreement between simulated and experimental data was observed, with deviations of only 2 points/cm in point density and centimetre-level differences in reconstructed ballast geometry. The digital twin was subsequently used to assess the suitability of this technology for ballast geometry measurement at different travel speeds, showing centimetre-order errors for both sensors at speeds of up to 120 km/h., Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PID2024-156356OB-I00, Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Xunta de Galicia | Ref. GPC-ED431B 2025/31, Agencia Estatal de Investigación | Ref. CPP2022-009679
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Contribución de congreso (ConferenceOutput)

CFD-based wind turbulence assessment model for urban UAV path planning

  • Aldao Pensado, Enrique
  • Veiga Piñeiro, Gonzalo
  • Martínez Alonso, Gálata
  • Veiga López, Fernando
  • Martín Ortega, Elena Beatriz
  • González Jorge, Higinio
The use of Unmanned Aerial Vehicles (UAVs) has grown substantially in recent years, owing to their efficiency and versatility. These advantages have led to their widespread adoption in applications such as logistics, infrastructure inspection, and environmental monitoring. However, such operations entail a high level of risk, as UAVs are particularly sensitive to adverse environmental conditions, especially wind gusts and turbulence, which can compromise flight stability and safety. This issue is especially relevant in urban areas, where the interaction between wind and built structures generates complex flow patterns, including instabilities and wake regions. These phenomena occur at spatial scales of only a few metres, requiring high-resolution tools such as Computational Fluid Dynamics (CFD) models to anticipate their formation. Consequently, recent studies have integrated CFD simulations into UAV path-planning tools to avoid flight through highly turbulent regions. Typically, these approaches analyse fluid variables such as wind speed or turbulent kinetic energy and restrict UAV access in areas exceeding predefined turbulence thresholds. However, such threshold-based methods are often arbitrary and do not account for the specific characteristics of the UAV when assessing the impact of turbulence on controllability. In this work, a turbulence assessment model is proposed to characterise UAV controllability under varying wind conditions. The proposed approach employs CFD simulation results and conducts a statistical analysis based on Dryden turbulence models. This information is then integrated into an efficient path-planning framework, enabling the computation of safe UAV trajectories in complex urban environments., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. PID2024-156356OB-I00, Agencia Estatal de Investigación | Ref. CPP2022-009679, Ministerio de Universidades | Ref. FPU21/01176, Xunta de Galicia | Ref. ED431B 2025/31
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Learning heuristics with Vision Transformers for risk-aware drone last-mile delivery

  • Aldao Pensado, Enrique
  • Veiga López, Fernando
  • Chanel, Caroline P.C.
  • Watanabe, Yoko
  • González Jorge, Higinio
for urban parcel transport, offering a sustainable and cost-effective alternative to traditional ground-based logistics. Such operations, however, introduce significant risks, requiring effective mitigation strategies and efficient path-planning tools. Risk-aware path planning in complex urban environments remains computationally demanding, as it involves a highly combinatorial sequential decision-making problem while requiring efficient online replanning to ensure reactivity. Efficient planners often rely on graph-based search methods, in which the heuristic used to guide the search plays a crucial role. However, in risk-aware path planning, heuristic estimation is particularly challenging, as risk evaluation forms part of the cost estimation and differs significantly from classical line-of-sight or Euclidean approaches. To address this limitation, this study presents a novel Deep Learning framework for estimating accurate and admissible heuristic functions in risk-aware UAV path planning. To this end, a comprehensive database of cost-to-go maps was generated using realistic 3D urban scenarios and a graph-based optimisation framework. This dataset was used to train a Vision Transformer (ViT) network capable of providing accurate cost-to-go estimates for various objective-function configurations. The proposed architecture incorporates an admissibility correction mechanism that regulates the trade-off between heuristic accuracy and admissibility, promoting either solution optimality or search efficiency. The method was benchmarked against conventional heuristics in terms of computation time and cost-to-go. Results show speed-ups of up to 20 times compared to traditional approaches while maintaining near-optimal solutions, with marginal increases in average path cost of the order of 0.1%., Agencia Estatal de Investigación | Ref. PID2024-156356OB-I00, Agencia Estatal de Investigación | Ref. CPP2022-009679, Ministerio de Ciencia, Innovación y Universidades | FPU21/ 01176, Xunta de Galicia | Ref. FEADER2024/052B, Xunta de Galicia | Ref. ED431B 2025/31, Ministerio de Defensa | Ref. 2019 65 0090004707501, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Wind-aware UAV photogrammetry planning: minimising motion blur for effective terrain surveying

  • Aldao Pensado, Enrique
  • Fernández-Pardo, Laura María
  • Veiga Piñeiro, Gonzalo
  • Domínguez Estévez, Pablo
  • Veiga López, Fernando
  • Fontenla Carrera, Gabriel
  • Martín Ortega, Elena Beatriz
  • González Jorge, Higinio
In recent years, the use of Unmanned Aerial Vehicles (UAVs) for remote sensing and aerial photogrammetry has surged, owing to their affordability and ability to capture high-resolution data in hard-to-reach areas. However, the effectiveness of these platforms can be limited by environmental factors such as turbulence and wind gusts, which may destabilize the aircraft and compromise the proper exposure of images. To address this issue, this work presents a terrain survey planner that considers the environmental conditions derived from a meteorological forecast. The system employs Computational Fluid Dynamics (CFD) simulations to generate high-resolution wind predictions for a given study area. This data is integrated into a state-of-the-art UAV simulator to estimate aircraft behaviour at various locations. Additionally, it incorporates an empirically calibrated camera model to predict sensor performance based on solar radiation estimates. With this information, a multi-objective optimization is performed, computing the optimal path and camera settings to mitigate the impact of wind on photogrammetry. Results highlight the significant impact of wind and poor lighting on motion blur, emphasizing the need to carefully plan not only the inspection path but also the time and date for correct image exposure., European Union | Ref. SARIL A302, European Comission | Ref. 101182153, European Comission | Ref. 101235536, Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. CPP2022-009679, Agencia Estatal de Investigación | Ref. FPU21/01176, European Union | Ref. FEADER 2024/052B, European Union | Ref. MRR C286
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Synthetic data generation techniques for enhancing crack detection in railway concrete sleepers

  • Aldao Pensado, Enrique
  • Fernández Pardo, L.
  • Veiga López, Fernando
  • González de Santos, L. M.
  • González Jorge, Higinio
Developing deep learning–based computer vision systems for the autonomous inspection of railway sleepers is a challenging task due to the difficulty in obtaining training images representative of the actual infrastructure. To address this issue, this work proposes two different synthetic data generation methodologies. The first method involves a neural network based on Stable Diffusion 1.5, a type of latent diffusion model (LDM) capable of generating photorealistic images through a process that sequentially applies denoising autoencoders. Fine-tuning of this model was performed using images of real railway tracks to generate pictures of damaged concrete sleepers. The second proposed method is a Crack Simulator based on image processing techniques. It modifies images of undamaged sleepers by introducing textures and morphologies of cracks, which are randomly generated using one-dimensional Perlin noise signals. Additionally, it incorporates semantic classification maps of track elements to determine the origin and propagation zones of the cracks, considering factors such as ballast stone occlusions. The main objective of this study is to evaluate the capabilities of these synthetic approaches and compare their effectiveness with respect to the use of generic open-source databases. To this end, synthetic image data sets were created, and several YOLO (you only look once) object detection models were trained. The performance of the detectors was evaluated, and a quantitative assessment of each synthetically generated image data set was conducted. Results showed that the Stable Diffusion model exhibits remarkable potential in improving the concrete damage detection performance of deep learning systems., Ministerio de Universidades | Ref. FPU21/01176, Agencia Estatal de Investigación | Ref. PLEC2021-007940, Agencia Estatal de Investigación | Ref. CPP2022-009679
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Towards safer UAV operations in urban air mobility: 3D automated modelling for CFD-based microweather systems

  • Aldao Pensado, Enrique
  • Veiga Piñeiro, Gonzalo
  • Domínguez Estévez, Pablo
  • Martín Ortega, Elena Beatriz
  • Veiga López, Fernando
  • Fontenla Carrera, Gabriel
  • González Jorge, Higinio
Turbulence and wind gusts pose significant risks to the safety and efficiency of UAVs (uncrewed aerial vehicles) in urban environments. In these settings, wind dynamics are strongly influenced by interactions with buildings and terrain, giving rise to small-scale phenomena such as vortex shedding and gusts. These wind speed oscillations generate unsteady forces that can destabilise UAV flight, particularly for small vehicles. Additionally, predicting their formation requires high-resolution Computational Fluid Dynamics (CFD) models, as current weather forecasting tools lack the resolution to capture these phenomena. However, such models require 3D representations of study areas with high geometric consistency and detail, which are not available for most cities. To address this issue, this work introduces an automated methodology for urban CFD mesh generation using open-source data. The proposed method generates error-free meshes compatible with OpenFOAM and includes tools for geometry modification, enhancing solver convergence and enabling adjustments to mesh complexity based on computational resources. Using this approach, CFD simulations are conducted for the city of Ourense, followed by an analysis of their impact on UAV operations and the integration of the system into a trajectory optimisation framework. The CFD model is also validated using experimental anemometer measurements., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. CPP2022-009679, Agencia Estatal de Investigación | Ref. FPU21/01176
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

An Integrated force assessment and disturbance compensation framework for stable UAV-based water-jet cleaning

  • Martínez Alonso, Gálata
  • Aldao Pensado, Enrique
  • Veiga López, Fernando
  • González Jorge, Higinio
Uncrewed aerial vehicles (UAVs) represent a promising alternative for building facade cleaning, improving efficiency while reducing the risks associated with working at height. However, such operations are particularly challenging due to the reaction forces generated by fluid discharge, which can compromise UAV stability and reduce cleaning accuracy. To mitigate this issue, this work proposes an integrated methodology for the preliminary assessment of UAV-based water-jet facade cleaning operations. First, a Computational Fluid Dynamics (CFD) model is developed to characterize jet-induced forces as a function of nozzle parameters and stand-off distance. The proposed force estimation model is evaluated experimentally at one low-pressure operating condition through flight tests using a commercial water-jet cleaning system. These disturbance forces are then incorporated into an over-actuated UAV dynamic model, together with a disturbance-aware compensation strategy, enabling the evaluation of vehicle stability and trajectory tracking under the simulated operating conditions. In parallel, a trajectory generation and operational planning framework is proposed, allowing systematic coverage of facades while maintaining the prescribed stand-off distances. The proposed framework is evaluated through nine simulation scenarios considering different flow rates and disturbance levels. The results demonstrate accurate trajectory tracking, with RMS errors below 3.4 cm across all cases, while the proposed disturbance compensation strategy reduces the RMS tracking error by approximately 67% compared with a non-compensated configuration. The results highlight the potential of UAV-based water-jet systems for autonomous and efficient facade maintenance, while also illustrating the importance of accounting for jet-induced disturbances in the control design., Agencia Estatal de Investigación | Ref. PID2024-156356OB-I00, Agencia Estatal de Investigación | Ref. CPP2022-009679, Ministerio de Ciencia, Innovación y Universidades | Ref. FPU21/01176, Xunta de Galicia | Ref. ED431B 2025/31
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Contribución de congreso (ConferenceOutput)

BIM-integrated UAV workflow for automatic façade inspection using IR imagery and component-level thermal analysis

  • Aldao Pensado, Enrique
  • Martínez Alonso, Gálata
  • Fontenla Carrera, Gabriel
  • González Jorge, Higinio
Infrared thermography is a widely adopted non-destructive technique for infrastructure inspection, enabling the detection of defects such as thermal bridges, insulation deficiencies, moisture accumulation, and material degradation. In recent years, the use of this technique alongside Unmanned Aerial Vehicles (UAVs) has attracted growing interest due to their ability to access hard-to-reach areas such as facades and bridges. This work presents an automatised workflow for the efficient acquisition of facade temperature fields using UAVs. RGB imagery is employed to perform Structure-from-Motion and camera pose estimation, which is then used to reconstruct radiance fields of the facade surface. Radiometric calibration is performed using reference temperature probes, allowing the reconstruction of absolute temperature fields from raw infrared imagery. The proposed method enables the direct integration of calibrated thermal fields into Building Information Models (BIM), providing per-component thermal information for detailed inspection and data analysis. A practical case study on a multi-material facade demonstrates the workflow, highlighting its potential to enhance preventive maintenance and support energy-efficiency evaluations., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. PID2024-156356OB-I00, Agencia Estatal de Investigación | Ref. CPP2022-009679, Xunta de Galicia | Ref. ED431B 2025/31