Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

UAV shore-to-ship parcel delivery: gust-aware trajectory planning

  • Aldao Pensado, Enrique
  • Veiga López, Fernando
  • González Jorge, Higinio
  • Pinto, Andry Maykol
This article presents a real-time trajectory optimizer for shore-to-ship operations using Unmanned Aerial Vehicles (UAVs). This concept aims to improve the efficiency of the transportation system by using UAVs to carry out parcel deliveries to offshore ships. During these operations, UAVs would fly relatively close to manned vessels, posing significant risks to the crew in the event of any incident. Additionally, in these areas, UAVs are exposed to meteorological phenomena such as wind gusts, which may compromise the stability of the flight and lead to potential collisions. Furthermore, this is a phenomenon difficult to predict, which poses a risk that must be considered in the operations. For these reasons, this work proposes a gust-aware multi-objective optimization solution for calculating fast and safe trajectories, considering the risk of flying in areas prone to the formation of intense gusts. Moreover, the system establishes a risk buffer with respect to all vessels to ensure compliance with EASA (European Union Aviation Safety Agency) regulations. For this purpose, Automatic Identification System (AIS) data are used to determine the position and velocity of the different vessels, and trajectory calculations are periodically updated based on their motion. The system computes the minimum-cost trajectory between the ground base and a moving destination ship while keeping these risk buffer constraints. The problem was solved through an Optimal Control formulation discretized on a dynamic graph with time-dependent costs and constraints. The solution was obtained using a Reaching Method that allowed efficient and real-time computations., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. TED2021-129757B-C3, Agencia Estatal de Investigación | Ref. FPU21/01176
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Physics-aware wind surrogate model for UAV aerodynamic response assessment

  • Veiga Piñeiro, Gonzalo
  • Domínguez Estévez, Pablo
  • Aldao Pensado, Enrique
  • Fontenla Carrera, Gabriel
  • Veiga López, Fernando
  • Martín Ortega, Elena Beatriz
  • González Jorge, Higinio
Purpose This study aims to use dimensionality reduction techniques applied to a detailed wind flow computational fluid dynamics (CFD)-generated database to develop a fast numerical tool that predicts, using the available weather forecast data, the airflow around any urban environment. The tool is aimed for its use in path planning design and optimization of unmanned aerial vehicles (UAVs) in urban mobility. Design/methodology/approach A complex urban site is selected as an example of vertiport. Geospatial data and land models are used to automate the CFD computational domain, mesh generation and terrain classification. To enhance efficiency, some mesh cells, corresponding to dense vegetation and remote buildings, are solved as porous media. After validation, a CFD database is created using a Reynolds-averaged Navier−Stokes model by sweeping different wind flow boundary conditions. The database is processed with high order singular value decomposition techniques, and interpolation methods enable real-time wind flow predictions, producing detailed maps with resolution under 1 m in approximately 1 s. Findings The surrogate model accelerates predictions by a factor of 7200 compared to direct CFD simulations while maintaining acceptable accuracy: mean relative deviations in velocity predictions near the buildings of interest are of the order of 2%. Examples of UAV trajectories and their dynamic responses are obtained using the developed tool. Originality/value The computational domain is automated using geospatial data, facilitating mesh classification and improving simulation efficiency. The surrogate model, which uses wind forecasts from the meteorological as inputs, provides real-time wind-flow predictions and improves UAV flight path design by identifying high-risk areas before take-off., Agencia Estatal de Investigación | Ref. PID2021-125060OB-100, Agencia Estatal de Investigación | Ref. TED2021-129757B-C3
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Dynamic UAV trajectory optimisation for parcel delivery with integrated third-party risk mitigation

  • Aldao Pensado, Enrique
  • Veiga López, Fernando
  • Chanel, Caroline P.C.
  • Watanabe, Yoko
  • González Jorge, Higinio
Last-mile delivery by Uncrewed Aerial Vehicles (UAVs) is an emerging solution for urban parcel transport, offering a sustainable and cost-effective alternative to traditional ground-based logistics. However, these operations introduce significant Third-Party Risk (TPR), necessitating comprehensive safety assessments. Evaluating UAV TPR in urban environments is particularly challenging due to the complexity of such settings, where factors like population density, urban geometry, and UAV behaviour must be carefully considered. Recent studies have developed analytical models for UAV risk assessment, but these often rely on oversimplified assumptions. For instance, many models focus primarily on total power loss scenarios while neglecting other critical failure modes, such as sensor malfunctions or flight controller errors. Additionally, existing models frequently overlook the impact of urban geometry in crash simulations, relying instead on constant shelter factors. This oversight can lead to inaccurate risk estimations, as buildings, roads, and other structures significantly influence collision probabilities and third-party exposure. To address these limitations, this study introduces a novel UAV failure simulation framework that realistically models aircraft responses to the most common UAV hardware failures. A UAV simulator is employed to generate probabilistic failure trajectories, which are then used to assess third-party exposure within a detailed 3D digital urban environment. This TPR assessment is integrated into a multi-objective optimisation framework based on a k-Non Aligned Nearest Neighbours (k-NANN) approach. Compared to traditional grid-based path planning methods, this approach generates safer and more efficient trajectories, reducing operational risk by up to 30% and flight time by 20%., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. TED2021-129757B-C3, Agencia Estatal de Investigación | Ref. CPP2022-009679, Xunta de Galicia | Ref. FEADER 2024/052B
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Development of a fast numerical tool for wind flow predictions around offshore wind turbines

  • Veiga Piñeiro, Gonzalo
  • Domínguez Estévez, Pablo
  • Aldao Pensado, Enrique
  • Fontenla Carrera, Gabriel
  • Veiga López, Fernando
  • Martín Ortega, Elena Beatriz
  • González Jorge, Higinio
Purpose: This study aims to develop a fast numerical tool for detailed wind flow predictions around offshore wind turbines. The tool is designed to assist in optimizing Unmanned Aerial Vehicle (UAV) flight paths for maintenance operations by providing high-resolution wind and turbulence data in real time. Design/methodology/approach: A Computational Fluid Dynamics (CFD)-generated database is built using a validated Reynolds-Averaged Navier–Stokes model under different wind conditions. Proper Orthogonal Decomposition, namely High Order Singular Value Decomposition, is applied to create a surrogate model. When coupled with site-specific meteorological forecasts, it produces high-resolution wind flow and turbulence maps (spatial resolution of less than 1 m) in less than 1.5 s. These predictions are used within a UAV simulator to assess flight behaviour under realistic turbulence conditions. Findings: This numerical tool speeds up wind predictions by a factor of 2,400 compared to direct CFD calculations while maintaining mean and maximum relative deviations for velocity and turbulence kinetic energy under 2 and 10%, respectively. Its integration with UAV flight assessment tools helps to identify critical regions that may compromise UAV stability, improving operational safety. Originality/value: This tool enables real-time wind predictions (using meteorological data as inputs) and UAV flight analysis, improving UAV-based maintenance operations in offshore wind farms. Its computational efficiency allows real-time use on any computer, supporting pre-flight risk assessment and safe UAV trajectory planning. The integration of the tool into UAV simulators provides a novel approach to enhance the reliability of UAV flights in extreme marine conditions., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. TED2021-129757B-C3
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Hybrid AI-reduced-order model for real-time wind flow prediction around offshore wind farms

  • Veiga Piñeiro, Gonzalo
  • Domínguez Estévez, Pablo
  • Aldao Pensado, Enrique
  • González Jorge, Higinio
  • Martín Ortega, Elena Beatriz
Accurate characterization of wind flows in harsh environments such as offshore wind farms is crucial to ensure the safety and efficiency of Unmanned Aerial Vehicles (UAVs) operations in inspection and maintenance tasks. However, Computational Fluid Dynamics (CFD) simulations remain prohibitively expensive for real-time applications. This work presents a surrogate modeling framework that combines Convolutional Autoencoders (CAE) with a Deep Neural Network (DNN) to enable fast prediction of complex wind fields and assess their influence on UAV trajectory planning. A database of Reynolds-Averaged Navier–Stokes (RANS) simulations around an offshore wind turbine, parametrized by boundary-condition descriptors, serves as the training foundation. Two-dimensional horizontal slices at different heights are extracted from each simulation and used as input fields for the CAE, which compresses the velocity magnitude and turbulent kinetic energy distributions into a low-dimensional latent space. The DNN then maps the inflow speed, direction, and slice height to this space, enabling 3D field reconstruction by combining predictions at multiple vertical levels. The flow reconstructions obtained through the predictive model reproduce key flow features with mean absolute errors around 1x10^{-3} in most regions, with higher deviations confined near walls. The surrogate achieves a computational speed-up of approximately 1.9x10^5 compared to RANS-CFD, enabling near real-time inference on embedded hardware. The predicted fields are integrated into a path-planning framework to identify safe and efficient trajectories by evaluating local turbulence and wind exposure. By merging the surrogate model with flow-aware navigation, the study bridges the gap between the accuracy of the CFD-level and operational scalability in UAV-based offshore maintenance., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. TED2021-129757B-C3, Agencia Estatal de Investigación | Ref. FPU21/01176, Universidade de Vigo/CISUG