Pasar al contenido principal

MOVILIDAD AEREA URBANA SEGURA Y EFICIENTE EN VERTIPUERTOS BASADA EN MODELOS CFD DE MICROMETEOROLOGIA

PID2021-125060OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

UAV shore-to-ship parcel delivery: gust-aware trajectory planning

  • Aldao Pensado, Enrique
  • Veiga López, Fernando
  • González Jorge, Higinio
  • Pinto, Andry Maykol
This article presents a real-time trajectory optimizer for shore-to-ship operations using Unmanned Aerial Vehicles (UAVs). This concept aims to improve the efficiency of the transportation system by using UAVs to carry out parcel deliveries to offshore ships. During these operations, UAVs would fly relatively close to manned vessels, posing significant risks to the crew in the event of any incident. Additionally, in these areas, UAVs are exposed to meteorological phenomena such as wind gusts, which may compromise the stability of the flight and lead to potential collisions. Furthermore, this is a phenomenon difficult to predict, which poses a risk that must be considered in the operations. For these reasons, this work proposes a gust-aware multi-objective optimization solution for calculating fast and safe trajectories, considering the risk of flying in areas prone to the formation of intense gusts. Moreover, the system establishes a risk buffer with respect to all vessels to ensure compliance with EASA (European Union Aviation Safety Agency) regulations. For this purpose, Automatic Identification System (AIS) data are used to determine the position and velocity of the different vessels, and trajectory calculations are periodically updated based on their motion. The system computes the minimum-cost trajectory between the ground base and a moving destination ship while keeping these risk buffer constraints. The problem was solved through an Optimal Control formulation discretized on a dynamic graph with time-dependent costs and constraints. The solution was obtained using a Reaching Method that allowed efficient and real-time computations., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. TED2021-129757B-C3, Agencia Estatal de Investigación | Ref. FPU21/01176
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Dynamic UAV trajectory optimisation for parcel delivery with integrated third-party risk mitigation

  • Aldao Pensado, Enrique
  • Veiga López, Fernando
  • Chanel, Caroline P.C.
  • Watanabe, Yoko
  • González Jorge, Higinio
Last-mile delivery by Uncrewed Aerial Vehicles (UAVs) is an emerging solution for urban parcel transport, offering a sustainable and cost-effective alternative to traditional ground-based logistics. However, these operations introduce significant Third-Party Risk (TPR), necessitating comprehensive safety assessments. Evaluating UAV TPR in urban environments is particularly challenging due to the complexity of such settings, where factors like population density, urban geometry, and UAV behaviour must be carefully considered. Recent studies have developed analytical models for UAV risk assessment, but these often rely on oversimplified assumptions. For instance, many models focus primarily on total power loss scenarios while neglecting other critical failure modes, such as sensor malfunctions or flight controller errors. Additionally, existing models frequently overlook the impact of urban geometry in crash simulations, relying instead on constant shelter factors. This oversight can lead to inaccurate risk estimations, as buildings, roads, and other structures significantly influence collision probabilities and third-party exposure. To address these limitations, this study introduces a novel UAV failure simulation framework that realistically models aircraft responses to the most common UAV hardware failures. A UAV simulator is employed to generate probabilistic failure trajectories, which are then used to assess third-party exposure within a detailed 3D digital urban environment. This TPR assessment is integrated into a multi-objective optimisation framework based on a k-Non Aligned Nearest Neighbours (k-NANN) approach. Compared to traditional grid-based path planning methods, this approach generates safer and more efficient trajectories, reducing operational risk by up to 30% and flight time by 20%., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. TED2021-129757B-C3, Agencia Estatal de Investigación | Ref. CPP2022-009679, Xunta de Galicia | Ref. FEADER 2024/052B
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Hybrid CFD-Deep Learning approach for urban wind flow predictions and risk-aware UAV path planning

  • Veiga Piñeiro, Gonzalo
  • Aldao Pensado, Enrique
  • Martín Ortega, Elena Beatriz
We present a CFD-driven surrogate modeling framework that integrates a Convolutional Autoencoder (CAE) with a Deep Neural Network (DNN) for the rapid prediction of urban wind environments and their subsequent use in UAV trajectory planning. A Reynolds-Averaged Navier–Stokes (RANS) CFD database is generated, parameterized by boundary-condition descriptors, to train the surrogate for velocity magnitude and turbulent kinetic energy (TKE). The CAE compresses horizontal flow fields into a low-dimensional latent space, providing an efficient representation of complex flow structures. The DNN establishes a mapping from input descriptors to the latent space, and flow reconstructions are obtained through the frozen decoder. Validation against CFD demonstrates that the surrogate captures velocity gradients and TKE distributions with mean absolute errors below 1% in most of the domain, while residual discrepancies remain confined to near-wall regions. The approach yields a computational speed-up of approximately 4000× relative to CFD, enabling deployment on embedded or edge hardware. For path planning, the domain is discretized as a k-Non-Aligned Nearest Neighbors (k-NANN) graph, and an A* search algorithm incorporates heading constraints and surrogate-based TKE thresholds. The integrated pipeline produces turbulence-aware, dynamically feasible trajectories, advancing the integration of high-fidelity flow predictions into urban air mobility decision frameworks., Agencia Estatal de Investigación | Ref. PID2021-125060OB-100, Agencia Estatal de Investigación | Ref. TED2021-129756B-C31
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Assessment of LiDAR-based sensing technologies in bird–drone collision scenarios

  • Rodriguez Seoane, Paula
  • Aldao Pensado, Enrique
  • Veiga López, Fernando
  • González Jorge, Higinio
The deployment of Advanced Air Mobility requires the continued development of technologies to ensure operational safety. One of the key aspects to consider here is the availability of robust solutions to avoid tactical conflicts between drones and other flying elements, such as other drones or birds. Bird detection is a relatively underexplored area, but due to the large number of birds, their shared airspace with drones, and the fact that they are non-cooperative elements within an air traffic management system, it is of interest to study how their detection can be improved and how collisions with them can be avoided. This work demonstrates how a LiDAR sensor mounted on a drone can detect birds of various sizes. A LiDAR simulator, previously developed by the Aerolab research group, is employed in this study. Six different collision trajectories and three different bird sizes (pigeon, falcon, and seagull) are tested. The results show that the LiDAR can detect any of these birds at about 30 m; bird detection improves when the bird gets closer and has a larger size. The detection accuracy is higher than 1 m in most of the cases under study. The errors grow with increasing drone-bird relative speed., Universidade de Vigo/CISUG, Ministerio de Universidades | Ref. FPU21/01176, Agencia Estatal de Investigación | Ref. PID2021-125060OB-100, Agencia Estatal de Investigación | Ref. TED2021-129756B-C31
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Heat index historical trends and projections due to climate change in the Mediterranean basin based on CMIP6

  • Álvarez Fernández, María Inés
  • Diaz Poso, A.
  • Lorenzo González, María de las Nieves
  • Roye, D.
Air temperature and relative humidity can be considered as two essential meteorological parameters in the determination of heat stress. The heat index (HI) includes both of them and it is appropriate for determining the thermal conditions of different climates. We investigated potential changes in the HI for the Mediterranean basin using simulations from the Coupled Model Intercomparison Project Phase 6 (CMIP6) climate models under two future scenarios (Shared Socio-economic Pathways: SSP2-4.5 and SSP5-8.5) over the period 2020–2099. Results reveal an important increase of HI at the end of the 21st century for both scenarios, with greater changes for the SSP5-8.5 scenario all over the basin. Strong significant upwards trends (around 1 °C per decade; significance level computed at 5%) are expected in the entire area and for all months at the end of the century, with greatest values during the summer months (close to 1.5 °C per decade) along the coastal areas of the basin. Many areas of the Southern Mediterranean basin (Africa and Arabian Peninsula) will be strongly affected with dangerously high heat index values (higher than 41 °C) during summer months by the end of the 21st century. A northward extension of these dangerous conditions is also expected including several areas of southern Europe, Xunta de Galicia | Ref. ED431C 2021/44, Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. TED2021-129152B-C43, Agencia Estatal de Investigación | Ref. TED2021-129756B-C31, Universidade de Vigo/CISUG, European Union | Ref. PRTR-C17.I1
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Enhancing UAV Classification with Synthetic Data: GMM LiDAR Simulator for Aerial Surveillance Applications

  • Aldao Pensado, Enrique
  • Veiga López, Fernando
  • González De Santos, Luis Miguel
  • González Jorge, Higinio
The proliferation of Unmanned Aerial Vehicles (UAVs) has raised safety concerns due to the potential threats resulting from their misuse or malicious intent. Due to their compact size, high-resolution surveillance systems such as LiDAR sensors are necessary to exert effective control over the airspace. Given the large volume of data that these technologies generate, efficient Deep Learning (DL) algorithms are needed to make their real-time implementation feasible. However, the training of DL models requires extense and diverse datasets, which in certain scenarios may not be available. Therefore, this work introduces a novel method based on Gaussian Mixture Models (GMMs) for simulating realistic synthetic point clouds of UAVs. This simulator is calibrated using experimental data and allows to probabilistically replicate the intricacies of sensor ray propagation, thereby addressing the limitations of current Ray Tracing (RT) simulators such as Gazebo or CARLA. In this study, we perform a quantitative analysis of the point cloud quality of the GMM simulator, comparing it with the results obtained using a RT approach. Additionally, we evaluate the effectiveness of both methods in training object classifiers. Results demonstrate the GMM simulator’s potential for creating realistic synthetic databases, Agencia Estatal de Investigación | Ref. PID2021-125060OB-100, Agencia Estatal de Investigación | Ref. TED2021-129757B-C3, Ministerio de Universidades | Ref.FPU21/01176
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Analysis of wind conditions for safe drone operation in offshore wind farms on the Spanish Atlantic coast

  • Pereira, Humberto
  • Álvarez Fernández, María Inés
  • Aldao Pensado, Enrique
  • Sousa, Magda C.
  • Picado, Ana
  • Lorenzo González, María de las Nieves
  • González Jorge, Higinio
  • Dias, João Miguel
Offshore wind energy represents one of the key contributors to the upcoming energy transition in the European energy sector. To ensure efficient operation, offshore wind turbines require management and maintenance planning that could benefit from using autonomous Unmanned Aerial Vehicles (UAVs). In this context, this study aims to analyze the wind conditions for safe drone operation in a potential offshore wind farm on the Spanish Northwest Coast. Wind data from the CERRA model was assessed against METEOGALICIA hindcasts for 1985–2020 at 3-h intervals (9h, 12h, 15h, and 18h) since these activities cannot be performed at night. Subsequently, this data was used to estimate the number of days with favorable conditions for the deployment of UAVs in operational and maintenance activities assuming that, on average, wind speed could not exceed 10 m∙s−1. Results showed that CERRA accurately reproduces the wind speed and directional frequency patterns in the wind farm area. During autumn and winter, three-day operational windows occurred in the highest percentage. October presented the highest number of operable days, and December the lowest. The methodology used in this study may be applied to economic feasibility studies for offshore wind farms, considering local wind patterns and maintenance needs., Fundação para a Ciência e a Tecnologia | Ref. UIDP/50017/2020, Fundação para a Ciência e a Tecnologia | Ref. UIDB/50017/2020, Fundação para a Ciência e a Tecnologia | Ref. LA/P/0094/2020, Xunta de Galicia | Ref. ED431C 2021/44, Agencia Estatal de Investigación | Ref. PID2021–125060OB-I00, Agencia Estatal de Investigación | Ref. TED2021–129756B-C31
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Contribución de congreso (ConferenceOutput)

CFD-based wind turbulence assessment model for urban UAV path planning

  • Aldao Pensado, Enrique
  • Veiga Piñeiro, Gonzalo
  • Martínez Alonso, Gálata
  • Veiga López, Fernando
  • Martín Ortega, Elena Beatriz
  • González Jorge, Higinio
The use of Unmanned Aerial Vehicles (UAVs) has grown substantially in recent years, owing to their efficiency and versatility. These advantages have led to their widespread adoption in applications such as logistics, infrastructure inspection, and environmental monitoring. However, such operations entail a high level of risk, as UAVs are particularly sensitive to adverse environmental conditions, especially wind gusts and turbulence, which can compromise flight stability and safety. This issue is especially relevant in urban areas, where the interaction between wind and built structures generates complex flow patterns, including instabilities and wake regions. These phenomena occur at spatial scales of only a few metres, requiring high-resolution tools such as Computational Fluid Dynamics (CFD) models to anticipate their formation. Consequently, recent studies have integrated CFD simulations into UAV path-planning tools to avoid flight through highly turbulent regions. Typically, these approaches analyse fluid variables such as wind speed or turbulent kinetic energy and restrict UAV access in areas exceeding predefined turbulence thresholds. However, such threshold-based methods are often arbitrary and do not account for the specific characteristics of the UAV when assessing the impact of turbulence on controllability. In this work, a turbulence assessment model is proposed to characterise UAV controllability under varying wind conditions. The proposed approach employs CFD simulation results and conducts a statistical analysis based on Dryden turbulence models. This information is then integrated into an efficient path-planning framework, enabling the computation of safe UAV trajectories in complex urban environments., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. PID2024-156356OB-I00, Agencia Estatal de Investigación | Ref. CPP2022-009679, Ministerio de Universidades | Ref. FPU21/01176, Xunta de Galicia | Ref. ED431B 2025/31
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Contribución de congreso (ConferenceOutput)

Turbulence-aware UAV path planning in urban environments

  • Aldao Pensado, Enrique
  • Fontenla Carrera, Gabriel
  • Veiga López, Fernando
  • González Jorge, Higinio
  • Martín Ortega, Elena Beatriz
Wind turbulence is a critical factor for the safety of Urban Air Mobility operations. In urban environments, buildings and structures can generate irregular wind currents that may compromise the stability of aircraft. This poses a high risk due to the potential severity of an accident in these areas. For these reasons, this paper introduces a risk-aware path planning solution for Urban Air Mobility applications, including Computational Fluid Dynamics (CFD) simulations that predict atmospheric wind at urban environments. The generated algorithm provides safe and efficient routes, avoiding flight through regions with significant turbulence. A practical case study was conducted to demonstrate the strong capabilities of the proposed solution, Agencia Estatal de Investigación | Ref. TED2021-129757B-C3, Agencia Estatal de Investigación | Ref. PID2021-125060OB-100, Ministerio de Universidades | Ref.FPU21/01176
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Wind-aware UAV photogrammetry planning: minimising motion blur for effective terrain surveying

  • Aldao Pensado, Enrique
  • Fernández-Pardo, Laura María
  • Veiga Piñeiro, Gonzalo
  • Domínguez Estévez, Pablo
  • Veiga López, Fernando
  • Fontenla Carrera, Gabriel
  • Martín Ortega, Elena Beatriz
  • González Jorge, Higinio
In recent years, the use of Unmanned Aerial Vehicles (UAVs) for remote sensing and aerial photogrammetry has surged, owing to their affordability and ability to capture high-resolution data in hard-to-reach areas. However, the effectiveness of these platforms can be limited by environmental factors such as turbulence and wind gusts, which may destabilize the aircraft and compromise the proper exposure of images. To address this issue, this work presents a terrain survey planner that considers the environmental conditions derived from a meteorological forecast. The system employs Computational Fluid Dynamics (CFD) simulations to generate high-resolution wind predictions for a given study area. This data is integrated into a state-of-the-art UAV simulator to estimate aircraft behaviour at various locations. Additionally, it incorporates an empirically calibrated camera model to predict sensor performance based on solar radiation estimates. With this information, a multi-objective optimization is performed, computing the optimal path and camera settings to mitigate the impact of wind on photogrammetry. Results highlight the significant impact of wind and poor lighting on motion blur, emphasizing the need to carefully plan not only the inspection path but also the time and date for correct image exposure., European Union | Ref. SARIL A302, European Comission | Ref. 101182153, European Comission | Ref. 101235536, Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. CPP2022-009679, Agencia Estatal de Investigación | Ref. FPU21/01176, European Union | Ref. FEADER 2024/052B, European Union | Ref. MRR C286
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Towards enhancing the safety of Advanced Air Mobility: Automatic 3D inter-urban modelling for improved weather monitoring

  • Aldao Pensado, Enrique
  • Veiga Piñeiro, Gonzalo
  • Domínguez Estévez, Pablo
  • Veiga López, Fernando
  • Fontenla Carrera, Gabriel
  • González Jorge, Higinio
  • Martín Ortega, Elena Beatriz
Abstract. Advanced Air Mobility (AAM) is an emerging sector that aims to optimise transportation in urban and interurban environments using Unmanned Aerial Vehicles (UAVs). However, these aircraft are particularly susceptible to adverse weather phenomena, such as turbulence or wind gusts. To ensure the safety of operations, high-resolution real-time atmospheric prediction models, such as those based on Computational Fluid Dynamics (CFD), are required. The development of these systems faces challenges as accurate geometric models of navigation environments are needed to simulate the interaction between the wind and the terrain and infrastructure. These models feature complex geometries, so they cannot be manually crafted, requiring automated processing of geospatial data sources. As the main novelty, this work presents a methodology for the automated modelling of interurban environments for CFD simulations using digital elevation models and georeferenced surface semantic classification data. A practical case study was developed in the outskirts of Vigo (Spain), where we demonstrate the effectiveness of our approach and its integration with the open-source CFD software OpenFOAM., Agencia Estatal de Investigación | Ref. TED2021-129757B-C3, Agencia Estatal de Investigación | Ref. PID2021-125060OB-100, Ministerio de Universidades | Ref.FPU21/01176
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Dynamic graph advanced air mobility trajectory optimization under weather forecast uncertainty

  • Aldao Pensado, Enrique
  • Veiga López, Fernando
  • González De Santos, Luis Miguel
  • González Jorge, Higinio
  • Martín Ortega, Elena Beatriz
  • Lorenzo González, María de las Nieves
  • Álvarez Fernández, María Inés
Ministerio de Universidades | Ref. FPU21/01176, Agencia Estatal de Investigación | Ref. PID2021-125060OB-100, Agencia Estatal de Investigación | Ref. TED2021-129757B-C3, Xunta de Galicia
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Hybrid AI-reduced-order model for real-time wind flow prediction around offshore wind farms

  • Veiga Piñeiro, Gonzalo
  • Domínguez Estévez, Pablo
  • Aldao Pensado, Enrique
  • González Jorge, Higinio
  • Martín Ortega, Elena Beatriz
Accurate characterization of wind flows in harsh environments such as offshore wind farms is crucial to ensure the safety and efficiency of Unmanned Aerial Vehicles (UAVs) operations in inspection and maintenance tasks. However, Computational Fluid Dynamics (CFD) simulations remain prohibitively expensive for real-time applications. This work presents a surrogate modeling framework that combines Convolutional Autoencoders (CAE) with a Deep Neural Network (DNN) to enable fast prediction of complex wind fields and assess their influence on UAV trajectory planning. A database of Reynolds-Averaged Navier–Stokes (RANS) simulations around an offshore wind turbine, parametrized by boundary-condition descriptors, serves as the training foundation. Two-dimensional horizontal slices at different heights are extracted from each simulation and used as input fields for the CAE, which compresses the velocity magnitude and turbulent kinetic energy distributions into a low-dimensional latent space. The DNN then maps the inflow speed, direction, and slice height to this space, enabling 3D field reconstruction by combining predictions at multiple vertical levels. The flow reconstructions obtained through the predictive model reproduce key flow features with mean absolute errors around 1x10^{-3} in most regions, with higher deviations confined near walls. The surrogate achieves a computational speed-up of approximately 1.9x10^5 compared to RANS-CFD, enabling near real-time inference on embedded hardware. The predicted fields are integrated into a path-planning framework to identify safe and efficient trajectories by evaluating local turbulence and wind exposure. By merging the surrogate model with flow-aware navigation, the study bridges the gap between the accuracy of the CFD-level and operational scalability in UAV-based offshore maintenance., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. TED2021-129757B-C3, Agencia Estatal de Investigación | Ref. FPU21/01176, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Towards safer UAV operations in urban air mobility: 3D automated modelling for CFD-based microweather systems

  • Aldao Pensado, Enrique
  • Veiga Piñeiro, Gonzalo
  • Domínguez Estévez, Pablo
  • Martín Ortega, Elena Beatriz
  • Veiga López, Fernando
  • Fontenla Carrera, Gabriel
  • González Jorge, Higinio
Turbulence and wind gusts pose significant risks to the safety and efficiency of UAVs (uncrewed aerial vehicles) in urban environments. In these settings, wind dynamics are strongly influenced by interactions with buildings and terrain, giving rise to small-scale phenomena such as vortex shedding and gusts. These wind speed oscillations generate unsteady forces that can destabilise UAV flight, particularly for small vehicles. Additionally, predicting their formation requires high-resolution Computational Fluid Dynamics (CFD) models, as current weather forecasting tools lack the resolution to capture these phenomena. However, such models require 3D representations of study areas with high geometric consistency and detail, which are not available for most cities. To address this issue, this work introduces an automated methodology for urban CFD mesh generation using open-source data. The proposed method generates error-free meshes compatible with OpenFOAM and includes tools for geometry modification, enhancing solver convergence and enabling adjustments to mesh complexity based on computational resources. Using this approach, CFD simulations are conducted for the city of Ourense, followed by an analysis of their impact on UAV operations and the integration of the system into a trajectory optimisation framework. The CFD model is also validated using experimental anemometer measurements., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. CPP2022-009679, Agencia Estatal de Investigación | Ref. FPU21/01176
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A benchmarking of commercial small fixed-wing electric UAVs and RGB cameras for photogrammetry monitoring in intertidal multi-regions

  • Fontenla Carrera, Gabriel
  • Aldao Pensado, Enrique
  • Veiga López, Fernando
  • González Jorge, Higinio
Small fixed-wing electric Unmanned Aerial Vehicles (UAVs) are perfect candidates to perform tasks in wide areas, such as photogrammetry, surveillance, monitoring, or search and rescue, among others. They are easy to transport and assemble, have much greater range and autonomy, and reach higher speeds than rotatory-wing UAVs. Aiming to contribute towards their future implementation, the objective of this article is to benchmark commercial, small, fixed-wing, electric UAVs and compatible RGB cameras to find the best combination for photogrammetry and data acquisition of mussel seeds and goose barnacles in a multi-region intertidal zone of the south coast of Galicia (NW of Spain). To compare all the options, a Coverage Path Planning (CPP) algorithm enhanced for fixed-wing UAVs to cover long areas with sharp corners was posed, followed by a Traveling Salesman Problem (TSP) to find the best route between regions. Results show that two options stand out from the rest: the Delair DT26 Open Payload with a PhaseOne iXM-100 camera (shortest path, minimum number of pictures and turns) and the Heliplane LRS 340 PRO with the Sony Alpha 7R IV sensor, finishing the task in the minimum time., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. TED2021-129756B-C31, Ministerio de Universidades | Ref. FPU21/01176, Universidade de Vigo
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Assessing the performance of the CERRA dataset in reproducing precipitation and extreme precipitation events over the Iberian Peninsula

  • Álvarez Fernández, María Inés
  • Pereira, H.
  • Lorenzo González, María de las Nieves
  • Picado, A.
  • Dias, J. M.
Study region The Iberian Peninsula (IP). Study focus Understanding precipitation and extreme precipitation events is crucial for managing climate impacts on human activities, ecosystems, and environment. Reanalysis datasets such as ERA-Interim and ERA5 are commonly used to studying these patterns; however, their spatial resolution often limits their accuracy. The recent high-resolution Copernicus European Regional ReAnalysis (CERRA) product provides an opportunity to improve precipitation estimates, particularly in regions with complex topography. The present study aims to assess the performance of the CERRA dataset in representing precipitation and extreme precipitation events across the IP. The analysis involves a comparison between CERRA and observational datasets, focusing on several annual and seasonal spatial precipitation indices. Special attention is given to the representation of extreme precipitation and their associated trends. New hydrological insights for the region The results indicate that CERRA effectively captures the spatial distribution of precipitation across most seasons, with weaker performance during the summer. CERRA reliable represents extreme precipitation and their temporal trends across the IP, especially in regions with complex orography such as Galicia and the Pyrenees. However, it tends to overestimate precipitation in drier areas. Trend analysis also revealed that, while CERRA successfully reflects the general patterns of precipitation extremes, some discrepancies remain, especially in autumn. Overall, CERRA demonstrates strong potential as a valuable dataset for hydrological and climatological studies over the IP., Fundação para a Ciência e a Tecnologia | Ref. UIDP/50017/2020, Fundação para a Ciência e a Tecnologia | Ref. UIDB/50017/2020, Fundação para a Ciência e a Tecnologia | Ref. LA/P/0094/2020, Xunta de Galicia | Ref. ED431C 2021/44, Agencia Estatal de Investigación | Ref. PID2021–125060OB-I00, Agencia Estatal de Investigación | Ref. TED2021–129756B-C31
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Contribución de congreso (ConferenceOutput)

BIM-integrated UAV workflow for automatic façade inspection using IR imagery and component-level thermal analysis

  • Aldao Pensado, Enrique
  • Martínez Alonso, Gálata
  • Fontenla Carrera, Gabriel
  • González Jorge, Higinio
Infrared thermography is a widely adopted non-destructive technique for infrastructure inspection, enabling the detection of defects such as thermal bridges, insulation deficiencies, moisture accumulation, and material degradation. In recent years, the use of this technique alongside Unmanned Aerial Vehicles (UAVs) has attracted growing interest due to their ability to access hard-to-reach areas such as facades and bridges. This work presents an automatised workflow for the efficient acquisition of facade temperature fields using UAVs. RGB imagery is employed to perform Structure-from-Motion and camera pose estimation, which is then used to reconstruct radiance fields of the facade surface. Radiometric calibration is performed using reference temperature probes, allowing the reconstruction of absolute temperature fields from raw infrared imagery. The proposed method enables the direct integration of calibrated thermal fields into Building Information Models (BIM), providing per-component thermal information for detailed inspection and data analysis. A practical case study on a multi-material facade demonstrates the workflow, highlighting its potential to enhance preventive maintenance and support energy-efficiency evaluations., Agencia Estatal de Investigación | Ref. PID2021-125060OB-I00, Agencia Estatal de Investigación | Ref. PID2024-156356OB-I00, Agencia Estatal de Investigación | Ref. CPP2022-009679, Xunta de Galicia | Ref. ED431B 2025/31
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Contribución de congreso (ConferenceOutput)

Route optimization of vessel-UAV tandem systems for offshore wind farm inspections

  • Fontenla Carrera, Gabriel
  • Aldao Pensado, Enrique
  • Veiga López, Fernando
  • González Jorge, Higinio
Offshore wind turbine inspections using autonomous Unmanned Aerial Vehicles (UAVs) allow for better data acquisition than those carried out by traditional methods. Besides, they are faster, safer and more economical by reducing the number of crew members exposed to dangerous environments. This article proposes a vessel-UAV tandem system in which the routes of both vehicles are optimized in three steps. First, the number of points where the vessel must be placed to cover all the turbines is minimized and the optimal positions where it must remain are sought. Second, the routes that the UAV must follow to reach all the wind turbines from each position of the vessel are calculated, including battery changes. Finally, the vessel route will be optimized based on the number of days needed to cover all the wind farm and the possibility, or not, to spend the nights at sea, Agencia Estatal de Investigación | Ref. TED2021-129757B-C3, Agencia Estatal de Investigación | Ref. PID2021-125060OB-100, Ministerio de Universidades | Ref.FPU21/01176