Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelización de la Estimulación Eléctrica Neuromuscular mediante un enfoque fisiológico y de caja negra, Neuromuscular Electrical Stimulation modelling by physiological and black-box approach

  • Piñuela Martín, Elisa
  • Del Ama, Antonio J.
  • Fraile Marinero, Juan C.
  • Gil Agudo, Ángel
[ES] En el presente artículo se expone el diseño y validación de dos modelos de Estimulación Eléctrica Neuromuscular (E.E.N.M.) para la relación entre parámetros de estimulación y características biomecánicas, siendo cada uno de ellos representativo de dos enfoques diferentes. Uno de ellos fisiológico simplificado, mientras que el otro es un modelo de caja negra basado en red neuronal, por lo que no incluye información sobre las características internas del sistema. En este artículo se exponen las características de cada uno, se describe el equipamiento utilizado y los experimentos para su identificación. Ambos modelos han sido identificados y validados en cinco sujetos sanos. El modelo fisiológico, a pesar de numerosas limitaciones encontradas, ha permitido el estudio en profundidad de los procesos internos y de la multitud de factores que involucran la activación muscular. El modelo en red neuronal, en cambio, presenta una buena precisión pero no proporciona conocimiento sobre los aspectos internos del sistema. Por ello, para una aplicación de control en la que sólo interesen las entradas y salidas del sistema, el modelo de caja negra es la mejor opción. Por otro lado, si se desea tener acceso a las variables internas del sistema neuromuscular bajo E.EN.M., es necesario realizar un análisis exhaustivo para la posterior mejora de las prestaciones del modelo fisiológico aquí presentado., [EN] In this paper, a comparison and validation of two models of Neuromuscular Electrical Stimulation (NMES) for the relationship between stimulation parameters and biomechanical characteristics is presented. Each model is representative of two opposite approaches: the first one is a physiological simplified model, while the second is a black-box model based on neural network, without information about the internal processes of muscle contraction under NMES. The features of each model, equipment used and the experiments are discussed. Five healthy volunteers were enrolled for identification and validation of both models. The physiological model, despite the numerous limitations found, allowed to characterize the internal processes and the variety of factors that involve NMES. The neural network model showed good precision but does not provide knowledge about the system. For a control purposes in which only the input-output relationship are of interest, a black box model can be considered as a good choice, whereas for gaining insight on the internal process involved in NMES, the physiological approach should be improved considerably to improve accuracy and performance., Este trabajo ha sido posible a través de la financiación del proyecto BioMot, 7FP, ref. (611695, 7FP) y el proyecto HYPER, CONSOLIDER INGENIO 2010.ref. CSD2009-00067.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Human-like compliant locomotion: State of the art of robotic implementations

  • Torricelli, Diego
  • González, J.
  • Weckx, M.
  • Jiménez-Fabián, R.
  • Vanderborght, B.
  • Sartori, M.
  • Dosen, S.
  • Farina, Dario
  • Lefeber, D.
  • Pons Rovira, José Luis
This review paper provides a synthetic yet critical overview of the key biomechanical principles of human bipedal walking and their current implementation in robotic platforms. We describe the functional role of human joints, addressing in particular the relevance of the compliant properties of the different degrees of freedom throughout the gait cycle. We focused on three basic functional units involved in locomotion, i.e. the ankle-foot complex, the knee, and the hip-pelvis complex, and their relevance to whole-body performance. We present an extensive review of the current implementations of these mechanisms into robotic platforms, discussing their potentialities and limitations from the functional and energetic perspectives. We specifically targeted humanoid robots, but also revised evidence from the field of lower-limb prosthetics, which presents innovative solutions still unexploited in the current humanoids. Finally, we identified the main critical aspects of the process of translating human principles into actual machines, providing a number of relevant challenges that should be addressed in future research., This review paper results from the research activities carried out in the FP7 project H2R 'Integrative Approach for the Emergence of Human-Like Robotic Locomotion', grant agreement n° 600698 (www.h2rproject.eu), and supported by the Biomot project, grant agreement n° 611695., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Voluntary control of wearable robotic exoskeletons by patients with paresis via neuromechanical modeling

  • Durandau, Guillaume
  • Farina, Dario
  • Asín-Prieto, Guillermo
  • Dimbwadyo-Terrer, Iris
  • Lerma-Lara, Sergio
  • Pons Rovira, José Luis
  • Moreno, Juan Camilo
  • Sartori, Massimo
[Background] Research efforts in neurorehabilitation technologies have been directed towards creating robotic exoskeletons to restore motor function in impaired individuals. However, despite advances in mechatronics and bioelectrical signal processing, current robotic exoskeletons have had only modest clinical impact. A major limitation is the inability to enable exoskeleton voluntary control in neurologically impaired individuals. This hinders the possibility of optimally inducing the activity-driven neuroplastic changes that are required for recovery., [Methods] We have developed a patient-specific computational model of the human musculoskeletal system controlled via neural surrogates, i.e., electromyography-derived neural activations to muscles. The electromyography-driven musculoskeletal model was synthesized into a human-machine interface (HMI) that enabled poststroke and incomplete spinal cord injury patients to voluntarily control multiple joints in a multifunctional robotic exoskeleton in real time., [Results] We demonstrated patients’ control accuracy across a wide range of lower-extremity motor tasks. Remarkably, an increased level of exoskeleton assistance always resulted in a reduction in both amplitude and variability in muscle activations as well as in the mechanical moments required to perform a motor task. Since small discrepancies in onset time between human limb movement and that of the parallel exoskeleton would potentially increase human neuromuscular effort, these results demonstrate that the developed HMI precisely synchronizes the device actuation with residual voluntary muscle contraction capacity in neurologically impaired patients., [Conclusions] Continuous voluntary control of robotic exoskeletons (i.e. event-free and task-independent) has never been demonstrated before in populations with paretic and spastic-like muscle activity, such as those investigated in this study. Our proposed methodology may open new avenues for harnessing residual neuromuscular function in neurologically impaired individuals via symbiotic wearable robots., The study was partly supported by ERC Starting Grant INTERACT (803035) and the FP7 BIOMOT Project (611695)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biped Locomotion Control through a Biomimetic CPG-based Controller

  • Santos, Cristina P.
  • Alves, Nuno
  • Moreno, Juan Camilo
Modern concepts of motor learning favour intensive training directed to the neural networks stimulation and reorganization within the spinal cord, the central pattern generator, by taking advantage of the neural plasticity. In the present work, a biomimetic controller using a system of adaptive oscillators is proposed to understand the neuronal principles underlying the human locomotion. A framework for neural control is presented, enabling the following contributions: a) robustness to external perturbations; b) flexibility to variations in the environmental constraints; and c) incorporation of volitional mechanisms for self-adjustment of gait dynamics. Phase modulation of adaptive oscillators and postural balance control are proposed as main strategies for stable locomotion. Simulations of the locomotion model with a biped robot in closed-loop control are presented to validate the implemented neuronal principles. Specifically, the proposed system for online modulation of previous learnt gait patterns was verified in terrains with different slopes. The proposed phase modulation method and postural balanced control enabled robustness enhancement considering a broader range of slope angles than recent studies. Furthermore, the system was also verified for tilted ground including different slopes in the same experiment and uneven terrain with obstacles. Adaptive Frequency Oscillators, under Dynamic Hebbian Learning Adaptation mechanism, are proposed to build a hierarchical control architecture with spinal and supra spinal centers with multiple rhythm-generating neural networks that drive the legs of a biped model. The proposed neural oscillators are based on frequency adaptation and can be entrained by sensory feedback to learn specific patterns. The proposed biomimetic controller intrinsically generates patterns of rhythmic activity that can be induced to sustain CPG function by specific training. This method provides versatile control, paving the way for the design of experimental motor control studies, optimal rehabilitation procedures and robot-assisted therapeutic outcomes., This work is supported by FCT with the reference project UID/EEA/04436/2013, by FEDER funds through the COMPETE 2020 Programa Operacional Competitividade e Internacionalizao (POCI) with the reference project POCI-01-0145-FEDER-006941. This research has been funded by the Commission of the European Union under the BioMot project - Smart Wearable Robots with Bioinspired SensoryMotor Skills (Grant Agreement number IFP7-ICT- 2013-10- 611695).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modular control of gait after incomplete spinal cord injury: Differences between sides

  • Pérez-Nombela, Soraya
  • Barroso, Filipe O.
  • Torricelli, Diego
  • De los Reyes-Guzmán, A.
  • Ama, Antonio J. del
  • Gómez-Soriano, Julio
  • Pons Rovira, José Luis
  • Gil-Agudo, Ángel
[Objectives]: The main goal of this study was to compare the modular organization of bilateral lower limb control in incomplete spinal cord injury (iSCI) patients during overground walking, using muscle synergies analysis. The secondary goal was to determine whether the similarity between the patients and control group correlate with clinical indicators of walking performance. [Setting]: This study was conducted in National Hospital for Spinal Cord Injury (Toledo, Spain). [Methods]: Eight iSCI patients and eight healthy subjects completed 10 walking trials at matched speed. For each trial, three-dimensional motion analysis and surface electromyography (sEMG) analysis of seven leg muscles from both limbs were performed. Muscle synergies were extracted from sEMG signals using a non-negative matrix factorization algorithm. The optimal number of synergies has been defined as the minimum number needed to obtain variability accounted for (VAF) ⩾90%. [Results]: When compared with healthy references, iSCI patients showed fewer muscle synergies in the most affected side and, in both sides, significant differences in the composition of synergy 2. The degree of similarity of these variables with the healthy reference, together with the composition of synergy 3 of the most affected side, presented significant correlations (P<0.05) with walking performance. [Conclusion]: The analysis of muscle synergies shows potential to detect differences between the two sides in patients with iSCI. Specifically, the VAF may constitute a new neurophysiological metric to assess and monitor patients’ condition throughout the gait recovery process., This work is part of the HYPER project ‘Hybrid Neuroprosthetic and Neurorobotic Devices for Functional Compensation and Rehabilitation of Motor Disorders’ (ref. CSD2009-00067) funded by CONSOLIDER-INGENIO 2010, and the project ASSOCIATE ‘A comprehensive and wearable robotics based approach to the rehabilitation and assistance to people with stroke and spinal cord injury’ (ref. DPI2014-58431-C4-1-R), both funded by the Spanish Ministry for Science and Innovation. This research has been also supported by the European Commission 7th Framework Program as part of the project BioMot (FP7-ICT-2013-10, grant agreement no. 611695).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Voluntary control of wearable roboticexoskeletons by patients with paresis vianeuromechanical modeling

  • Durandau, Guillaume
  • Farina, Dario
  • Asín-Prieto, Guillermo
  • Dimbwadyo-Terrer, Iris
  • Lerma-Lara, Sergio
  • Pons Rovira, José Luis
  • Moreno, Juan Camilo
  • Sartori, Massimo
Background: Research efforts in neurorehabilitation technologies have been directed towards creating robotic exoskeletons to restore motor function in impaired individuals. However, despite advances in mechatronics and bioelectrical signal processing, current robotic exoskeletons have had only modest clinical impact. A major limitation is the inability to enable exoskeleton voluntary control in neurologically impaired individuals. This hinders the possibility of optimally inducing the activity-driven neuroplastic changes that are required for recovery. Methods: We have developed a patient-specific computational model of the human musculoskeletal system controlled via neural surrogates, i.e., electromyography-derived neural activations to muscles. The electromyography-driven musculoskeletal model was synthesized into a human-machine interface (HMI) that enabled poststroke and incomplete spinal cord injury patients to voluntarily control multiple joints in a multifunctional robotic exoskeleton in real time. Results: We demonstrated patients’ control accuracy across a wide range of lower-extremity motor tasks. Remarkably, an increased level of exoskeleton assistance always resulted in a reduction in both amplitude and variability in muscle activations as well as in the mechanical moments required to perform a motor task. Since small discrepancies in onset time between human limb movement and that of the parallel exoskeleton would potentially increase human neuromuscular effort, these results demonstrate that the developed HMI precisely synchronizes the device actuation with residual voluntary muscle contraction capacity in neurologically impaired patients. Conclusions: Continuous voluntary control of robotic exoskeletons (i.e. event-free and task-independent) has never been demonstrated before in populations with paretic and spastic-like muscle activity, such as those investigated in this study. Our proposed methodology may open new avenues for harnessing residual euromuscular function in neurologically impaired individuals via symbiotic wearable robots., The study was partly supported by ERC Starting Grant INTERACT (803035) and the FP7 BIOMOT Project (611695)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Editorial: Assessing bipedal locomotion: Towards replicable benchmarks for robotic and robot-assisted locomotion

  • Torricelli, Diego
  • Veneman, Jan F.
  • Gonzalez-Vargas, J.
  • Mombaur, Katja
  • Remy, C.David
We thank all authors contributing with their work to this Research Topic. We also acknowledge all the European Projects that have supported past and current research in this topic: the FP7 Projects H2R (grant 600698), BALANCE (grant 601003), KoroiBot (grant 611909), WALK- MAN (grant 611832), BioMot (grant 611695), and the currently ongoing H2020 Project EUROBENCH (grant 779963), and COST Action CA16116.