Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Voluntary control of wearable robotic exoskeletons by patients with paresis via neuromechanical modeling

  • Durandau, Guillaume
  • Farina, Dario
  • Asín-Prieto, Guillermo
  • Dimbwadyo-Terrer, Iris
  • Lerma-Lara, Sergio
  • Pons Rovira, José Luis
  • Moreno, Juan Camilo
  • Sartori, Massimo
[Background] Research efforts in neurorehabilitation technologies have been directed towards creating robotic exoskeletons to restore motor function in impaired individuals. However, despite advances in mechatronics and bioelectrical signal processing, current robotic exoskeletons have had only modest clinical impact. A major limitation is the inability to enable exoskeleton voluntary control in neurologically impaired individuals. This hinders the possibility of optimally inducing the activity-driven neuroplastic changes that are required for recovery., [Methods] We have developed a patient-specific computational model of the human musculoskeletal system controlled via neural surrogates, i.e., electromyography-derived neural activations to muscles. The electromyography-driven musculoskeletal model was synthesized into a human-machine interface (HMI) that enabled poststroke and incomplete spinal cord injury patients to voluntarily control multiple joints in a multifunctional robotic exoskeleton in real time., [Results] We demonstrated patients’ control accuracy across a wide range of lower-extremity motor tasks. Remarkably, an increased level of exoskeleton assistance always resulted in a reduction in both amplitude and variability in muscle activations as well as in the mechanical moments required to perform a motor task. Since small discrepancies in onset time between human limb movement and that of the parallel exoskeleton would potentially increase human neuromuscular effort, these results demonstrate that the developed HMI precisely synchronizes the device actuation with residual voluntary muscle contraction capacity in neurologically impaired patients., [Conclusions] Continuous voluntary control of robotic exoskeletons (i.e. event-free and task-independent) has never been demonstrated before in populations with paretic and spastic-like muscle activity, such as those investigated in this study. Our proposed methodology may open new avenues for harnessing residual neuromuscular function in neurologically impaired individuals via symbiotic wearable robots., The study was partly supported by ERC Starting Grant INTERACT (803035) and the FP7 BIOMOT Project (611695)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adaptation Strategies for Personalized Gait Neuroprosthetics

  • Koelewijn, A.D.
  • Audu, M.
  • Ama, Antonio J. del
  • Colucci, A.
  • Font-Llagunes, Josep Maria
  • Gogeascoechea, A.
  • Hnat, S.K.
  • Makowski, N.
  • Moreno, Juan Camilo
  • Nandor, M.
  • Quinn, R.
  • Reichenbach, M.
  • Reyes, R.D.
  • Sartori, M.
  • Soekadar, S.
  • Triolo, R.J
  • Vermehren, M.
  • Wenger, C.
  • Yavuz, U.S.
  • Fey, D.
  • Beckerle, P.
Personalization of gait neuroprosthetics is paramount to ensure their efficacy for users, who experience severe limitations in mobility without an assistive device. Our goal is to develop assistive devices that collaborate with and are tailored to their users, while allowing them to use as much of their existing capabilities as possible. Currently, personalization of devices is challenging, and technological advances are required to achieve this goal. Therefore, this paper presents an overview of challenges and research directions regarding an interface with the peripheral nervous system, an interface with the central nervous system, and the requirements of interface computing architectures. The interface should be modular and adaptable, such that it can provide assistance where it is needed. Novel data processing technology should be developed to allow for real-time processing while accounting for signal variations in the human. Personalized biomechanical models and simulation techniques should be developed to predict assisted walking motions and interactions between the user and the device. Furthermore, the advantages of interfacing with both the brain and the spinal cord or the periphery should be further explored. Technological advances of interface computing architecture should focus on learning on the chip to achieve further personalization. Furthermore, energy consumption should be low to allow for longer use of the neuroprosthesis. In-memory processing combined with resistive random access memory is a promising technology for both. This paper discusses the aforementioned aspects to highlight new directions for future research in gait neuroprosthetics., AK is funded by a faculty endowment by adidas AG. MA, SKH, NM, MN, RJQ, R-DR, RJT are supported by NSF CPS grant 1739800, VA Merit Reviews A2275-R and 3056, and the NIH (5T32EB004314-15, R01 NS040547-13). MS and AG are funded by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant agreement No. 803035). AJd-A, JMF-L, and JCM are supported by coordinated grants RTI2018-097290-B-C31/C32/C33 (TAILOR project) funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. MR is funded by the Lo3-ML project by the Federal Ministry for Education, Science and Technology (BMBF) (Funding No. 16ES1142K). AC, SS, and MV were supported by the European Research Council (ERC) under the project NGBMI (759370), the Einstein Stiftung Berlin, the ERA-NET NEURON project HYBRIDMIND (BMBF, 01GP2121A and -B) and the BMBF project NEO (13GW0483C).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Editorial: Rehabilitation robotics: challenges in design, control, and real applications, volume II

  • Romero Sánchez, Francisco
  • Luporini Menegaldo, Luciano
  • Font Llagunes, Josep Maria|||0000-0002-7192-2980
  • Sartori, Massimo
The author(s) declare that financial support was received for the research, authorship, and/or publication of this article. The authors, in order of appearance, wish to thank the following support given by: (FR-S) the Ministry of Science and Innovation— Spanish Agency of Research (MCIN/AEI/10.13039/501100011033) through project PID2022-137525OB-C21, (LM) the National Council for Scientific and Technological Development (CNPq) though the Productivity Grant No. 311715/2021-4 and Carlos Chagas Filho Foundation for Research Support in the State of Rio de Janeiro (FAPERJ) Grant No. E-26/200.469/2023, (JFL) the Ministry of Science and Innovation—Spanish Agency of Research (MCIN/AEI/10.13039/501100011033) and “ERDF A way of making Europe” through project PID2021-123657OB-C33, and (MS) the European Union’s Horizon2020 Research and Innovation Programme as part of the European Research Council (ERC) Starting Grant INTERACT (803035).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Editorial: Rehabilitation robotics: challenges in design, control, and real applications, volume II

  • Romero Sánchez, Francisco
  • Luporini Menegaldo, Luciano
  • Font Llagunes, Josep Maria
  • Sartori, Massimo
The author(s) declare that financial support was received for the research, authorship, and/or publication of this article. The authors, in order of appearance, wish to thank the following support given by: (FR-S) the Ministry of Science and Innovation— Spanish Agency of Research (MCIN/AEI/10.13039/501100011033) through project PID2022-137525OB-C21, (LM) the National Council for Scientific and Technological Development (CNPq) though the Productivity Grant No. 311715/2021-4 and Carlos Chagas Filho Foundation for Research Support in the State of Rio de Janeiro (FAPERJ) Grant No. E-26/200.469/2023, (JFL) the Ministry of Science and Innovation—Spanish Agency of Research (MCIN/AEI/10.13039/501100011033) and “ERDF A way of making Europe” through project PID2021-123657OB-C33, and (MS) the European Union’s Horizon2020 Research and Innovation Programme as part of the European Research Council (ERC) Starting Grant INTERACT (803035)., Postprint (published version)