Pasar al contenido principal

DISEÑO DE SISTEMAS ROBOTICOS Y NEUROPROTESICOS PERSONALIZABLES PARA LA ASISTENCIA DE LA MARCHA UTILIZANDO METODOS DE SIMULACION PREDICTIVA

RTI2018-097290-B-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Systematic review on wearable lower-limb exoskeletons for gait training in neuromuscular impairments

  • Rodríguez-Fernández, Antonio
  • Lobo-Prat, Joan
  • Font-Llagunes, Josep Maria
Gait disorders can reduce the quality of life for people with neuromuscular impairments. Therefore, walking recovery is one of the main priorities for counteracting sedentary lifestyle, reducing secondary health conditions and restoring legged mobility. At present, wearable powered lower-limb exoskeletons are emerging as a revolutionary technology for robotic gait rehabilitation. This systematic review provides a comprehensive overview on wearable lower-limb exoskeletons for people with neuromuscular impairments, addressing the following three questions: (1) what is the current technological status of wearable lower-limb exoskeletons for gait rehabilitation?, (2) what is the methodology used in the clinical validations of wearable lower-limb exoskeletons?, and (3) what are the benefits and current evidence on clinical efficacy of wearable lower-limb exoskeletons? We analyzed 87 clinical studies focusing on both device technology (e.g., actuators, sensors, structure) and clinical aspects (e.g., training protocol, outcome measures, patient impairments), and make available the database with all the compiled information. The results of the literature survey reveal that wearable exoskeletons have potential for a number of applications including early rehabilitation, promoting physical exercise, and carrying out daily living activities both at home and the community. Likewise, wearable exoskeletons may improve mobility and independence in non-ambulatory people, and may reduce secondary health conditions related to sedentariness, with all the advantages that this entails. However, the use of this technology is still limited by heavy and bulky devices, which require supervision and the use of walking aids. In addition, evidence supporting their benefits is still limited to short-intervention trials with few participants and diversity among their clinical protocols. Wearable lower-limb exoskeletons for gait rehabilitation are still in their early stages of development and randomized control trials are needed to demonstrate their clinical efficacy., This research has been partially supported by PhD grant No. 2020 FI_B1 00195 funded by the Agency for Management of University and Research Grants (AGAUR) along with the Secretariat of Universities and Research of the Catalan Ministry of Business and Knowledge and the European Social Fund (ESF), and by grants RTI2018-097290-B-C33 and PTQ2018-010227 funded by the Spanish Ministry of Science and Innovation (MCI) - Agencia Estatal de Investigación (AEI) along with the European Regional Development Fund (ERDF).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adaptation Strategies for Personalized Gait Neuroprosthetics

  • Koelewijn, A.D.
  • Audu, M.
  • Ama, Antonio J. del
  • Colucci, A.
  • Font-Llagunes, Josep Maria
  • Gogeascoechea, A.
  • Hnat, S.K.
  • Makowski, N.
  • Moreno, Juan Camilo
  • Nandor, M.
  • Quinn, R.
  • Reichenbach, M.
  • Reyes, R.D.
  • Sartori, M.
  • Soekadar, S.
  • Triolo, R.J
  • Vermehren, M.
  • Wenger, C.
  • Yavuz, U.S.
  • Fey, D.
  • Beckerle, P.
Personalization of gait neuroprosthetics is paramount to ensure their efficacy for users, who experience severe limitations in mobility without an assistive device. Our goal is to develop assistive devices that collaborate with and are tailored to their users, while allowing them to use as much of their existing capabilities as possible. Currently, personalization of devices is challenging, and technological advances are required to achieve this goal. Therefore, this paper presents an overview of challenges and research directions regarding an interface with the peripheral nervous system, an interface with the central nervous system, and the requirements of interface computing architectures. The interface should be modular and adaptable, such that it can provide assistance where it is needed. Novel data processing technology should be developed to allow for real-time processing while accounting for signal variations in the human. Personalized biomechanical models and simulation techniques should be developed to predict assisted walking motions and interactions between the user and the device. Furthermore, the advantages of interfacing with both the brain and the spinal cord or the periphery should be further explored. Technological advances of interface computing architecture should focus on learning on the chip to achieve further personalization. Furthermore, energy consumption should be low to allow for longer use of the neuroprosthesis. In-memory processing combined with resistive random access memory is a promising technology for both. This paper discusses the aforementioned aspects to highlight new directions for future research in gait neuroprosthetics., AK is funded by a faculty endowment by adidas AG. MA, SKH, NM, MN, RJQ, R-DR, RJT are supported by NSF CPS grant 1739800, VA Merit Reviews A2275-R and 3056, and the NIH (5T32EB004314-15, R01 NS040547-13). MS and AG are funded by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant agreement No. 803035). AJd-A, JMF-L, and JCM are supported by coordinated grants RTI2018-097290-B-C31/C32/C33 (TAILOR project) funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. MR is funded by the Lo3-ML project by the Federal Ministry for Education, Science and Technology (BMBF) (Funding No. 16ES1142K). AC, SS, and MV were supported by the European Research Council (ERC) under the project NGBMI (759370), the Einstein Stiftung Berlin, the ERA-NET NEURON project HYBRIDMIND (BMBF, 01GP2121A and -B) and the BMBF project NEO (13GW0483C).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

TAILOR: Patient-specific hybrid wearable systems for walking rehabilitation

  • Moreno Sastoque, Juan Camilo
  • Font Llagunes, Josep Maria|||0000-0002-7192-2980
  • del Ama Espinosa, Antonio José
Personalization of robotic exoskeletons for walking assistance to the end user is still a challenge for this technology. The TAILOR project aims to create hybrid and modular robotic-neuroprosthetic wearable systems that can be adapted to an individual patient. For that, a User-Centered Design approach and predictive dynamic simulation tools are conceived to support the design of the hybrid assistive technology., Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A new modular neuroprosthesis suitable for hybrid FES-robot applications and tailored assistance

  • Gil Castillo, Javier
  • Herrera Valenzuela, Diana Sofía
  • Torricelli, Diego
  • Gil Agudo, Angel
  • Opisso Salleras, Eloy
  • Vidal Samsó, Joan
  • Font Llagunes, Josep Maria|||0000-0002-7192-2980
  • del Ama Espinosa, Antonio José
  • Moreno, Juan C.
Background: To overcome the application limitations of functional electrical stimulation (FES), such as fatigue or nonlinear muscle response, the combination of neuroprosthetic systems with robotic devices has been evaluated, resulting in hybrid systems that have promising potential. However, current technology shows a lack of flexibility to adapt to the needs of any application, context or individual. The main objective of this study is the development of a new modular neuroprosthetic system suitable for hybrid FES-robot applications to meet these needs. Methods: In this study, we conducted an analysis of the requirements for developing hybrid FES-robot systems and reviewed existing literature on similar systems. Building upon these insights, we developed a novel modular neuroprosthetic system tailored for hybrid applications. The system was specifically adapted for gait assistance, and a technological personalization process based on clinical criteria was devised. This process was used to generate different system configurations adjusted to four individuals with spinal cord injury or stroke. The effect of each system configuration on gait kinematic metrics was analyzed by using repeated measures ANOVA or Friedman’s test. Results: A modular NP system has been developed that is distinguished by its flexibility, scalability and personalization capabilities. With excellent connection characteristics, it can be effectively integrated with robotic devices. Its 3D design facilitates fitting both as a stand-alone system and in combination with other robotic devices. In addition, it meets rigorous requirements for safe use by incorporating appropriate safety protocols, and features appropriate battery autonomy, weight and dimensions. Different technological configurations adapted to the needs of each patient were obtained, which demonstrated an impact on the kinematic gait pattern comparable to that of other devices reported in the literature. Conclusions: The system met the identified technical requirements, showcasing advancements compared to systems reported in the literature. In addition, it demonstrated its versatility and capacity to be combined with robotic devices forming hybrids, adapting well to the gait application. Moreover, the personalization procedure proved to be useful in obtaining various system configurations tailored to the diverse needs of individuals., This research has been partially supported by grant DTS23/00047 funded by ISCIII and cofunded by the European Union, and partially supported by Grants RTI 2018-097290-B-C31 and PID2021-123657OB-C31 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by “ERDF A way of making Europe”.Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo de sistemas modulares robóticos y neuroprotésicos personalizables para la asistencia de la marcha patológica a través del diseño centrado en el usuario: Proyecto TAILOR

  • Herrera Valenzuela, Diana Sofía
  • Gil Castillo, Javier
  • Pina, Javier
  • Peiret Giménez, Albert
  • Moreno Sastoque, Juan Camilo
  • Font Llagunes, Josep Maria|||0000-0002-7192-2980
  • Murillo Licea, Narda
  • Gil Agudo, Angel
  • del Ama Espinosa, Antonio José
Currently available wereable exoskeletons and neuroprosthetic gait assistive devices have controverted efficacy and low penetration into rehabilitation centers because they are generic solutions that do not consider the individual requirements and characteristics of each patient. TAILOR project proposes a new approach to the design of customizable neurorobotic systems, based on robotic exoskeletons (WR) and modular neuroprosthetics (NP) to provide subject-specific solutions. These two technologies are integrated with a closed loop hybrid controller. We are using a User-Centered Design approach for the design and development of these technologies to effectively introduce the requirements and needs of patients and clinical staff. Currently, we are making modifications to the WR to integrate it to the NP, which has already been developed, Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Evaluation of optimal control formulations for predicting swing-through axillary crutch-assisted gait

  • Febrer Nafría, Miriam|||0000-0002-1189-835X
  • Manocha, Ranita H.K.
  • Kuntze, Gregor
  • Font Llagunes, Josep Maria|||0000-0002-7192-2980
  • Ronsky, Janet L.
Crutches are widely used to assist gait in individuals with lower limb impairment. Walking with crutches alters both upper and lower body loading, potentially leading to discomfort. As such, it is important to study how crutch walking affects upper and lower extremity movement patterns. Computer modelling and simulation can provide answers that motion analysis cannot. For this reason, the availability of an algorithm that allows the prediction of different crutch walking patterns could be useful in order to study the impact of changing conditions on crutch walking, and could overcome some limitations of experimental studies, such as difficulty in recruiting subjects or limitation in the number of tests that can be performed, Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Systematic review on wearable lower-limb exoskeletons for gait training in neuromuscular impairments

  • Rodríguez Fernández, Antonio|||0000-0002-6272-8326
  • Lobo Prat, Joan
  • Font Llagunes, Josep Maria|||0000-0002-7192-2980
Gait disorders can reduce the quality of life for people with neuromuscular impairments. Therefore, walking recovery is one of the main priorities for counteracting sedentary lifestyle, reducing secondary health conditions and restoring legged mobility. At present, wearable powered lower-limb exoskeletons are emerging as a revolutionary technology for robotic gait rehabilitation. This systematic review provides a comprehensive overview on wearable lower-limb exoskeletons for people with neuromuscular impairments, addressing the following three questions: (1) what is the current technological status of wearable lower-limb exoskeletons for gait rehabilitation?, (2) what is the methodology used in the clinical validations of wearable lower-limb exoskeletons?, and (3) what are the benefits and current evidence on clinical efficacy of wearable lower-limb exoskeletons? We analyzed 87 clinical studies focusing on both device technology (e.g., actuators, sensors, structure) and clinical aspects (e.g., training protocol, outcome measures, patient impairments), and make available the database with all the compiled information. The results of the literature survey reveal that wearable exoskeletons have potential for a number of applications including early rehabilitation, promoting physical exercise, and carrying out daily living activities both at home and the community. Likewise, wearable exoskeletons may improve mobility and independence in non-ambulatory people, and may reduce secondary health conditions related to sedentariness, with all the advantages that this entails. However, the use of this technology is still limited by heavy and bulky devices, which require supervision and the use of walking aids. In addition, evidence supporting their benefits is still limited to short-intervention trials with few participants and diversity among their clinical protocols. Wearable lower-limb exoskeletons for gait rehabilitation are still in their early stages of development and randomized control trials are needed to demonstrate their clinical efficacy., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Predictive multibody dynamic simulation of human neuromusculoskeletal systems: a review

  • Febrer Nafría, Miriam|||0000-0002-1189-835X
  • Nasr, Ali
  • Ezati, Mahdokht
  • Brown, Peter
  • Font Llagunes, Josep Maria|||0000-0002-7192-2980
  • McPhee, John
Over the past decade, there has been a rapid increase in applications of multibody system dynamics to the predictive simulation of human movement. Using predictive “what-if” human dynamic simulations that do not rely on experimental testing or prototypes, new medical interventions and devices can be developed more quickly, cheaply, and safely. In this paper, we provide a comprehensive review of research into the predictive multibody dynamic simulation of human movements, with applications in clinical practice, medical and assistive device design, sports, and industrial ergonomics. Multibody models of human neuromusculoskeletal systems are reviewed, including models of joints, contacts, and muscle forces or torques, followed by a review of simulation approaches that use optimal control methods and a cost function to predict human movements. Modelling and optimal control software are also reviewed, and directions for future research are suggested., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Modelling neuromusculoskeletal response to functional electrical stimulation

  • Peiret Giménez, Albert
  • Gil Castillo, Javier
  • Pina, Javier
  • Jané Cardona, Marcel
  • Moreno Sastoque, Juan Camilo
  • del Ama Espinosa, Antonio José
  • Font Llagunes, Josep Maria|||0000-0002-7192-2980
A model for functional electrical stimulation with hysteretic muscle recruitment is used to reproduce experimental tibialis anterior stimulation to control ankle dorsiflexion. The subject-specific parameters of the muscle recruitment model where identified from experimental data by solving a nonlinear least-squares problem, Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Rehabilitation of Musculoskeletal Models Using Deep Reinforcement Learning

  • Madorell Batlle, Queralt
  • Peiret Giménez, Albert
  • Font Llagunes, Josep Maria|||0000-0002-7192-2980
Neural rehabilitation is a long and complex process that patients undergo after suffering a nervous system injury, such as stroke. These kinds of injuries usually result in brain cells death and partial loss of mobility and coordination. During rehabilitation, the patient performs a series of movements and physical exercises that promote neural plasticity, the brain’s mechanism to regenerate and make new pathways that substitute the damaged connections. Unfortunately, full recovery is almost impossible. The rehabilitation process is tailored to the patient based on the physician’s expertise, and it evolves with the patient’s needs and recovery. However, few computational models for rehabilitation have been developed. For instance, Lee et al. [1] trained a musculoskeletal model of a healthy subject using deep reinforcement learning, and then a prosthetic leg was added to simulate an injury. Results showed how the artificial neural network that controlled muscle contraction was able to adapt and learn to move with the prosthetic leg. Here we show how deep reinforcement learning can be used to control a musculoskeletal model. The algorithm is able to learn new and stable motions by maximizing the so-called reward function. The nervous system is modelled with an artificial neural network, and the deep deterministic policy gradient (DDPG) algorithm is used to train the model in a simulated environment., Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Assisted Walking with Hybrid Orthosis Using Functional Electrical Stimulation

  • Peiret Giménez, Albert
  • Jané Cardona, Marcel
  • Pàmies Vilà, Rosa|||0000-0002-3814-9199
  • Font Llagunes, Josep Maria|||0000-0002-7192-2980
Neurological disorders affect body mobility, strength and coordination, and can significantly impact the quality of life. For instance, suffering a spinal cord injury (SCI) generally result in permanent lower-limbs paralysis. Robotic assistive devices, such as lower-limb exoskeletons, can help SCI patients to recover their mobility and autonomy in everyday life. Moreover, advances in neuroprosthetics have shown that functional electrical stimulation (FES) can be used to control joint motion by inducing muscle contraction through electrical assistance [1]. Hybrid assistive devices that combine wearable robotics and neuroprosthesis present some advantages compared to robotic assistive devices. Namely, FES-induced muscle contraction activates muscle metabolism, which delays muscle atrophy and promotes cardiovascular activity. However, determining the optimal control strategy of hybrid devices is still a challenge. Here, we present an optimization framework for musculoskeletal models with hybrid assistive devices using the direct collocation method, Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Assisted Walking with Hybrid Orthosis Using Functional Electrical Stimulation

  • Peiret Giménez, Albert
  • Jané Cardona, Marcel
  • Pàmies Vilà, Rosa
  • Font Llagunes, Josep Maria
Neurological disorders affect body mobility, strength and coordination, and can significantly impact the quality of life. For instance, suffering a spinal cord injury (SCI) generally result in permanent lower-limbs paralysis. Robotic assistive devices, such as lower-limb exoskeletons, can help SCI patients to recover their mobility and autonomy in everyday life. Moreover, advances in neuroprosthetics have shown that functional electrical stimulation (FES) can be used to control joint motion by inducing muscle contraction through electrical assistance [1]. Hybrid assistive devices that combine wearable robotics and neuroprosthesis present some advantages compared to robotic assistive devices. Namely, FES-induced muscle contraction activates muscle metabolism, which delays muscle atrophy and promotes cardiovascular activity. However, determining the optimal control strategy of hybrid devices is still a challenge. Here, we present an optimization framework for musculoskeletal models with hybrid assistive devices using the direct collocation method, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Editorial: Rehabilitation robotics: Challenges in design, control, and real applications

  • Romero Sánchez, Francisco
  • Luporini Menegaldo, Luciano
  • Font Llagunes, Josep Maria
  • Sartori, Massimo
In the last decade, research focused on rehabilitation robotics has progressed from proposing restricted or rigid solutions in a clinical setting to portable devices compliant with the user and also adapted to the their requirements, based on their disability and the rehabilitation training program. Novel techniques have inspired the evolution of rehabilitation devices from hard and bulky to soft, lightweight, and fully wearable. For example, biologically inspired actuators have relaxed the constraint of having to rely on rigid supports, as the skeletal system can be used to that end. Furthermore, the use of synergies havehas led to a reduction of in the number of actuators and improved their control. Moreover, the latest advances in modeling and simulation have allowed for assessing and compensating for fatigue, as well as simulating the use of assistive devices out of aclinical environment. All these research achievements have enabled anew generation of portable rehabilitation devices. In the present Frontiers Research Topic, novel techniques for the design, simulation, sensing, and control of rehabilitation devices are presented for rehabilitation devices such as powered exoskeletons, neuroprostheses, and equipment for moving the rehabilitation environment out of the clinical setting., Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Systematic review on wearable lower-limb exoskeletons for gait training in neuromuscular impairments

  • Rodríguez Fernández, Antonio
  • Lobo Prat, Joan
  • Font Llagunes, Josep Maria
Gait disorders can reduce the quality of life for people with neuromuscular impairments. Therefore, walking recovery is one of the main priorities for counteracting sedentary lifestyle, reducing secondary health conditions and restoring legged mobility. At present, wearable powered lower-limb exoskeletons are emerging as a revolutionary technology for robotic gait rehabilitation. This systematic review provides a comprehensive overview on wearable lower-limb exoskeletons for people with neuromuscular impairments, addressing the following three questions: (1) what is the current technological status of wearable lower-limb exoskeletons for gait rehabilitation?, (2) what is the methodology used in the clinical validations of wearable lower-limb exoskeletons?, and (3) what are the benefits and current evidence on clinical efficacy of wearable lower-limb exoskeletons? We analyzed 87 clinical studies focusing on both device technology (e.g., actuators, sensors, structure) and clinical aspects (e.g., training protocol, outcome measures, patient impairments), and make available the database with all the compiled information. The results of the literature survey reveal that wearable exoskeletons have potential for a number of applications including early rehabilitation, promoting physical exercise, and carrying out daily living activities both at home and the community. Likewise, wearable exoskeletons may improve mobility and independence in non-ambulatory people, and may reduce secondary health conditions related to sedentariness, with all the advantages that this entails. However, the use of this technology is still limited by heavy and bulky devices, which require supervision and the use of walking aids. In addition, evidence supporting their benefits is still limited to short-intervention trials with few participants and diversity among their clinical protocols. Wearable lower-limb exoskeletons for gait rehabilitation are still in their early stages of development and randomized control trials are needed to demonstrate their clinical efficacy., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A new modular neuroprosthesis suitable for hybrid FES-robot applications and tailored assistance

  • Gil Castillo, Javier
  • Herrera Valenzuela, Diana Sofía
  • Torricelli, Diego
  • Gil Agudo, Angel
  • Opisso Salleras, Eloy
  • Vidal Samsó, Joan
  • Font Llagunes, Josep Maria
  • del Ama Espinosa, Antonio José
  • Moreno, Juan C.
Background: To overcome the application limitations of functional electrical stimulation (FES), such as fatigue or nonlinear muscle response, the combination of neuroprosthetic systems with robotic devices has been evaluated, resulting in hybrid systems that have promising potential. However, current technology shows a lack of flexibility to adapt to the needs of any application, context or individual. The main objective of this study is the development of a new modular neuroprosthetic system suitable for hybrid FES-robot applications to meet these needs. Methods: In this study, we conducted an analysis of the requirements for developing hybrid FES-robot systems and reviewed existing literature on similar systems. Building upon these insights, we developed a novel modular neuroprosthetic system tailored for hybrid applications. The system was specifically adapted for gait assistance, and a technological personalization process based on clinical criteria was devised. This process was used to generate different system configurations adjusted to four individuals with spinal cord injury or stroke. The effect of each system configuration on gait kinematic metrics was analyzed by using repeated measures ANOVA or Friedman’s test. Results: A modular NP system has been developed that is distinguished by its flexibility, scalability and personalization capabilities. With excellent connection characteristics, it can be effectively integrated with robotic devices. Its 3D design facilitates fitting both as a stand-alone system and in combination with other robotic devices. In addition, it meets rigorous requirements for safe use by incorporating appropriate safety protocols, and features appropriate battery autonomy, weight and dimensions. Different technological configurations adapted to the needs of each patient were obtained, which demonstrated an impact on the kinematic gait pattern comparable to that of other devices reported in the literature. Conclusions: The system met the identified technical requirements, showcasing advancements compared to systems reported in the literature. In addition, it demonstrated its versatility and capacity to be combined with robotic devices forming hybrids, adapting well to the gait application. Moreover, the personalization procedure proved to be useful in obtaining various system configurations tailored to the diverse needs of individuals., This research has been partially supported by grant DTS23/00047 funded by ISCIII and cofunded by the European Union, and partially supported by Grants RTI 2018-097290-B-C31 and PID2021-123657OB-C31 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by “ERDF A way of making Europe”.Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

TAILOR: Patient-specific hybrid wearable systems for walking rehabilitation

  • Moreno Sastoque, Juan Camilo
  • Font Llagunes, Josep Maria
  • del Ama Espinosa, Antonio José
Personalization of robotic exoskeletons for walking assistance to the end user is still a challenge for this technology. The TAILOR project aims to create hybrid and modular robotic-neuroprosthetic wearable systems that can be adapted to an individual patient. For that, a User-Centered Design approach and predictive dynamic simulation tools are conceived to support the design of the hybrid assistive technology., Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Rehabilitation of Musculoskeletal Models Using Deep Reinforcement Learning

  • Madorell Batlle, Queralt
  • Peiret Giménez, Albert
  • Font Llagunes, Josep Maria
Neural rehabilitation is a long and complex process that patients undergo after suffering a nervous system injury, such as stroke. These kinds of injuries usually result in brain cells death and partial loss of mobility and coordination. During rehabilitation, the patient performs a series of movements and physical exercises that promote neural plasticity, the brain’s mechanism to regenerate and make new pathways that substitute the damaged connections. Unfortunately, full recovery is almost impossible. The rehabilitation process is tailored to the patient based on the physician’s expertise, and it evolves with the patient’s needs and recovery. However, few computational models for rehabilitation have been developed. For instance, Lee et al. [1] trained a musculoskeletal model of a healthy subject using deep reinforcement learning, and then a prosthetic leg was added to simulate an injury. Results showed how the artificial neural network that controlled muscle contraction was able to adapt and learn to move with the prosthetic leg. Here we show how deep reinforcement learning can be used to control a musculoskeletal model. The algorithm is able to learn new and stable motions by maximizing the so-called reward function. The nervous system is modelled with an artificial neural network, and the deep deterministic policy gradient (DDPG) algorithm is used to train the model in a simulated environment., Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Predictive multibody dynamic simulation of human neuromusculoskeletal systems: a review

  • Febrer Nafría, Miriam
  • Nasr, Ali
  • Ezati, Mahdokht
  • Brown, Peter
  • Font Llagunes, Josep Maria
  • McPhee, John
Over the past decade, there has been a rapid increase in applications of multibody system dynamics to the predictive simulation of human movement. Using predictive “what-if” human dynamic simulations that do not rely on experimental testing or prototypes, new medical interventions and devices can be developed more quickly, cheaply, and safely. In this paper, we provide a comprehensive review of research into the predictive multibody dynamic simulation of human movements, with applications in clinical practice, medical and assistive device design, sports, and industrial ergonomics. Multibody models of human neuromusculoskeletal systems are reviewed, including models of joints, contacts, and muscle forces or torques, followed by a review of simulation approaches that use optimal control methods and a cost function to predict human movements. Modelling and optimal control software are also reviewed, and directions for future research are suggested., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Modelling neuromusculoskeletal response to functional electrical stimulation

  • Peiret Giménez, Albert
  • Gil Castillo, Javier
  • Pina, Javier
  • Jané Cardona, Marcel
  • Moreno Sastoque, Juan Camilo
  • del Ama Espinosa, Antonio José
  • Font Llagunes, Josep Maria
A model for functional electrical stimulation with hysteretic muscle recruitment is used to reproduce experimental tibialis anterior stimulation to control ankle dorsiflexion. The subject-specific parameters of the muscle recruitment model where identified from experimental data by solving a nonlinear least-squares problem, Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Evaluation of optimal control formulations for predicting swing-through axillary crutch-assisted gait

  • Febrer Nafría, Miriam
  • Manocha, Ranita H.K.
  • Kuntze, Gregor
  • Font Llagunes, Josep Maria
  • Ronsky, Janet L.
Crutches are widely used to assist gait in individuals with lower limb impairment. Walking with crutches alters both upper and lower body loading, potentially leading to discomfort. As such, it is important to study how crutch walking affects upper and lower extremity movement patterns. Computer modelling and simulation can provide answers that motion analysis cannot. For this reason, the availability of an algorithm that allows the prediction of different crutch walking patterns could be useful in order to study the impact of changing conditions on crutch walking, and could overcome some limitations of experimental studies, such as difficulty in recruiting subjects or limitation in the number of tests that can be performed, Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo de sistemas modulares robóticos y neuroprotésicos personalizables para la asistencia de la marcha patológica a través del diseño centrado en el usuario: Proyecto TAILOR

  • Herrera Valenzuela, Diana Sofía
  • Gil Castillo, Javier
  • Pina, Javier
  • Peiret Giménez, Albert
  • Moreno Sastoque, Juan Camilo
  • Font Llagunes, Josep Maria
  • Murillo Licea, Narda
  • Gil Agudo, Angel
  • del Ama Espinosa, Antonio José
Currently available wereable exoskeletons and neuroprosthetic gait assistive devices have controverted efficacy and low penetration into rehabilitation centers because they are generic solutions that do not consider the individual requirements and characteristics of each patient. TAILOR project proposes a new approach to the design of customizable neurorobotic systems, based on robotic exoskeletons (WR) and modular neuroprosthetics (NP) to provide subject-specific solutions. These two technologies are integrated with a closed loop hybrid controller. We are using a User-Centered Design approach for the design and development of these technologies to effectively introduce the requirements and needs of patients and clinical staff. Currently, we are making modifications to the WR to integrate it to the NP, which has already been developed, Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Postprint (author's final draft)