Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lithospheric mantle buoyancy: the role of tectonic convergence and mantle composition

  • Boonma, Kittiphon
  • Kumar, Ajay
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manel
Plate subduction and delamination, two key processes driving plate tectonics, are thought to be controlled by the buoyancy of the lithospheric mantle relative to the underlying asthenosphere. Most mantle delamination models consider a lithospheric density higher than the asthenosphere to ensure negative buoyancy (slab pull). However, mineral physics show that the continental lithospheric mantle density is lighter than the asthenosphere, and that only its pressure-temperature-composition dependence makes it become denser and unstable when sinking adiabatically. Here, we explore the controls on buoyancy using a 2D thermal-diffusive model of plate convergence, considering five chemical compositions and tectonothermal ages, namely Archon (>2.5 Ga), Proton (2.5–1.0 Ga), Tecton (<1.0 Ga), and two oceanic lithospheric plates of 30 Ma and 120 Ma. While the advection of colder rock in oceanic-like plates always results in negative buoyancy, Protons and Tectons exhibit an ability to slowly flip from negative to positive buoyancy at low convergence rates: they first favour the sinking due to advection and then become more buoyant because they are thinner and heat up faster during subduction. In contrast, the lighter density of cratons overprints this effect and hinders delamination or subduction, regardless of the convergence rate. This may explain why Archons are more stable during the Wilson cycle., This work has been supported by EU Marie Curie Initial Training Network ‘SUBITOP’ (674899-SUBITOP-H2020-MSCA-ITN-2015) and MITE (Spanish Government national research program; CGL2014-59516)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deep Seated Density Anomalies Across the Iberia-Africa Plate Boundary and Its Topographic Response

  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Kumar, Ajay
  • Carballo, Arkaitz
  • García-Castellanos, Daniel
The modes in which the lithosphere deforms during continental collision and the mechanisms involved are not well understood. While continental subduction and mantle delamination are often invoked in tectonophysical studies, these processes are difficult to be confirmed in more complex tectonic regions such as the Gibraltar Arc. We study the present-day density and compositional structure of the lithosphere along a transect running from South Iberia to North Africa crossing the western Gibraltar Arc. This region is located in the westernmost continental segment of the African-Eurasian plates, characterized by a diffuse transpressive plate boundary. An integrated and self-consistent geophysical-petrological methodology is used to model the lithosphere structure variations and the thermophysical properties of the upper mantle. The crustal structure is mainly constrained by seismic experiments and geological data, whereas the composition of the lithospheric mantle is constrained by xenolith data. The results show large lateral variations in the topography of the lithosphere-asthenosphere boundary. We distinguish different chemical lithospheric mantle domains that reproduce the main trends of the geophysical observables and the modeled P and S wave seismic velocities. A sublithospheric body colder than the surrounding mantle is needed beneath the Betics-Rif to adjust the measured potential fields. We link this body to the Iberian slab localized just to the east of the profile and having some effect on the geoid and Bouguer anomalies. Local isostasy allows explaining most of the topography, but an elastic thickness higher than 10 km is needed to explain local misfits between the Atlas and the Rif Mountains., Funding was granted by the Spanish Government through the project MITE (CGL2014‐59516‐P) and projects Alpimed (PIE‐CSIC‐201530E082) and Subtetis (PIE‐CSIC‐201830E039). A. C. benefitted from a JAE‐Pre‐CP grant from CSIC. A. K. benefitted from EU Marie Curie Initial Training Network “SUBITOP” (674899‐SUBITOP‐H2020‐MSCA‐ITN‐2015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Zanclean megaflood of the Mediterranean – Searching for independent evidence

  • García-Castellanos, Daniel
  • Micallef, Aaron
  • Estrada, Ferran
  • Camerlenghi, Angelo
  • Ercilla, Gemma
  • Periáñez, R.
  • Abril-Hernández, José María
About six million years ago, the Mediterranean Sea underwent a period of isolation from the ocean and widespread salt deposition known as the Messinian Salinity Crisis (MSC), allegedly leading to a kilometer-scale level drawdown by evaporation. One of the competing scenarios proposed for the termination of this environmental crisis 5.3 million years ago consists of a megaflooding event refilling the Mediterranean Sea through the Strait of Gibraltar: the Zanclean flood. The main evidence supporting this hypothesis is a nearly 390 km long and several hundred meters deep erosion channel extending from the Gulf of Cádiz (Atlantic Ocean) to the Algerian Basin (Western Mediterranean), implying the excavation of ca. 1000 km3 of Miocene sediment and bedrock. Based on the understanding obtained from Pleistocene onshore megaflooding events and using ad-hoc hydrodynamic modeling, here we explore two predictions of the Zanclean outburst flood hypothesis: 1) The formation of similar erosion features at sills communicating sub-basins within the Mediterranean Sea, specifically at the Sicily Sill; and 2) the accumulation of the eroded materials as megaflood deposits in areas of low flow energy. Recent data show a 6-km-wide amphitheater-shaped canyon preserved at the Malta Escarpment that may represent the erosional expression of the Zanclean flood after filling the western Mediterranean and spilling into the Eastern Basin. Next to that canyon, a ~1600 km3 accumulation of chaotic, seismically transparent sediment has been found in the Ionian Sea, compatible in age and facies with megaflood deposits. Another candidate megaflood deposit has been identified in the Alborán Sea in the form of elongated sedimentary bodies that parallel the flooding channel and are seismically characterized by chaotic and discontinuous stratified reflections, that we interpret as equivalent to gravel and boulder megabars described in terrestrial megaflood settings. Numerical model predictions show that sand deposits found at the Miocene/Pliocene (M/P) boundary in ODP sites 974 and 975 (South Balearic and Tyrrhenian seas) are consistent with suspension transport from the Strait of Gibraltar during a flooding event at a peak water discharge of ~108 m3 s−1. © 2019 The Authors, Funding has been provided by the COST Action Medsalt CA15103 , by the ETN SaltGiant ( European Union funded , Horizon2020 , Marie Skłodowska-Curie grant agreement No 765256 and 674899 ) and by the Spanish public projects MITE ( CGL2014-59516 ) FAUCES ( CMT2015-65461-C2-R , MINECO / FEDER ) and DAMAGE (AEI/FEDER CGL2016-80687-R )., With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Erratum: Author Correction: Lithospheric mantle buoyancy: the role of tectonic convergence and mantle composition (Scientific reports (2019) 9 1 (17953))

  • Boonma, Kittiphon
  • Kumar, Ajay
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manel
Correction to: Scientific Reports https://doi.org/10.1038/s41598-019-54374-w, published online 29 November 2019, This work has been supported by EU Marie Curie Initial Training Network ‘SUBITOP’ (674899-SUBITOP-H2020-MSCA-ITN-2015) and MITE (Spanish Government national research program; CGL2014- 59516)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deep Seated Density Anomalies Across the Iberia¿Africa Plate Boundary and Its Topographic Response

  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Kumar, Ajay
  • Carballo, Alberto
  • García-Castellanos, Daniel
The modes in which the lithosphere deforms during continental collision and the mechanisms involved are not well understood. While continental subduction and mantle delamination are often invoked in tectonophysical studies, these processes are difficult to be confirmed in more complex tectonic regions such as the Gibraltar Arc. We study the present¿day density and compositional structure of the lithosphere along a transect running from South Iberia to North Africa crossing the western Gibraltar Arc. This region is located in the westernmost continental segment of the African¿Eurasian plates, characterized by a diffuse transpressive plate boundary. An integrated and self¿consistent geophysical¿petrological methodology is used to model the lithosphere structure variations and the thermophysical properties of the upper mantle. The crustal structure is mainly constrained by seismic experiments and geological data, whereas the composition of the lithospheric mantle is constrained by xenolith data. The results show large lateral variations in the topography of the lithosphere¿asthenosphere boundary. We distinguish different chemical lithospheric mantle domains that reproduce the main trends of the geophysical observables and the modeled P and S wave seismic velocities. A sublithospheric body colder than the surrounding mantle is needed beneath the Betics¿Rif to adjust the measured potential fields. We link this body to the Iberian slab localized just to the east of the profile and having some effect on the geoid and Bouguer anomalies. Local isostasy allows explaining most of the topography, but an elastic thickness higher than 10 km is needed to explain local misfits between the Atlas and the Rif Mountains., Funding was granted by the Spanish Government through the project MITE (CGL2014‐59516‐P) and projects Alpimed (PIE‐CSIC‐201530E082) and Subtetis (PIE‐CSIC‐201830E039). A. C. benefitted from a JAE‐Pre‐CP grant from CSIC. A. K. benefitted from EU Marie Curie Initial Training Network “SUBITOP” (674899‐SUBITOP‐H2020‐MSCA‐ITN‐2015).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

LitMod2D_2.0: An Improved Integrated Geophysical-Petrological Modeling Tool for the Physical Interpretation of Upper Mantle Anomalies

  • Kumar, Ajay
  • Fernández Ortiga, Manel
  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Vergés Masip, Jaume
  • Afonso, Juan Carlos
LitMod2D_2.0 can be downloaded from https://doi.org/10.20350/digitalCSIC/9063 or GitHub https://github.com/ajay6763/LitMod2D_2.0_package_dist_users., LitMod2D integrates geophysical and petrological data sets to produce the thermal, density, and seismic velocity structure of the lithosphere and upper mantle. We present a new LitMod2D_2.0 package with improvements focused on (i) updated anelastic attenuation correction for anharmonic seismic velocities, (ii) chemical composition in the sublithospheric mantle, and (iii) incorporation of sublithospheric mantle anomalies. Sublithospheric mantle anomalies can be defined with different chemical composition, temperature, seismic velocities, and a combination of them, allowing the application of LitMod2D_2.0 to regions affected by mantle upwelling, subduction, delamination, and metasomatism. We demonstrate the potential application of LitMod2D_2.0 to such regions and the sensitivity of thermal and compositional anomalies on density and seismic velocities through synthetic models. Results show nonlinearity between the sign of thermal and seismic velocity anomalies, and that S wave velocities are more sensitive to temperature whereas P wave velocities are to composition. In a synthetic example of subduction, we show the sensitivity of sublithospheric mantle anomalies associated with the slab and the corner flow on surface observables (elevation, geoid height, and gravity anomalies). A new open-source graphic user interface is incorporated in the new package. The output of the code is simplified by writing only the relevant physical parameters (temperature, pressure, material type, density, and seismic velocities) to allow the user using predefined post-processing codes from a toolbox (flexure, mineral assemblages, synthetic passive seismological data, and tomography) or designing new ones. We demonstrate a post-processing example calculating synthetic seismic tomography, Rayleigh surface-wave dispersion curves, and P wave receiver functions from the output file of LitMod2D_2.0. © 2020. The Authors., This work has been supported by EU Marie Curie Initial Training Network (SUBITOP) (674899-SUBITOP-H2020-MSCA-ITN-2015), the Agencia Estatal de Investigación through projects MITE (CGL2014-59516) and GeoCAM (PGC2018-095154-B-100), and the Agency for Management of University and Research Grants of Catalonia (AGAUR-2017-SGR-847). Thermodynamic databases used can be found in cited references (Afonso & Zlotnik,?2011; Stixrude & Lithgow-Bertelloni,; Xu et al.,). We thank two anonymous reviwers for insightful comments and suggestions on an earlier version of this manuscript. We also thank F. Salajeghegh for sharing his GUI matlab routines. This work has been done using the facilities of the Laboratory of Geodynamic Modeling from ICTJA-CSIC. JCA's work is supported by ARC Linkage Project LP170100233 and ARC Discovery Project DP190102940. LitMod2D_2.0 can be downloaded from https://doi.org/10.20350/digitalCSIC/9063 or GitHub https://github.com/ajay6763/LitMod2D_2.0_package_dist_users., Peer reviewed