Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

LitMod2D_2.0: An improved tool for the interpretation of upper mantle anomalies

  • Kumar, Ajay
  • Fernández Ortiga, Manel
  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Vergés Masip, Jaume
  • Afonso, Juan Carlos
Utiliza Sistema operativo Linux o windows. Programación en Python y fortran., LitMod2D_2.0 is a tool to unravel the thermal, compositional, density, and seismological structure of the crust and upper mantle (~400 km depth) along cross-sections by integrating geophysical and geochemical dataset in a self-consistence thermodynamic manner. It is a finite-element forward modeling approach code based on the architecture of the CAGES code (Zeyen & Fernàndez 1994). For a detailed description of LitMod2D the reader is referred to Afonso et al. (2008) and Kumar et al. (2019)., EU Marie Curie Initial Training Network ‘SUBITOP’ (674899-SUBITOP-H2020-MSCA-ITN-2015), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lithospheric mantle buoyancy: the role of tectonic convergence and mantle composition

  • Boonma, Kittiphon
  • Kumar, Ajay
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manel
Plate subduction and delamination, two key processes driving plate tectonics, are thought to be controlled by the buoyancy of the lithospheric mantle relative to the underlying asthenosphere. Most mantle delamination models consider a lithospheric density higher than the asthenosphere to ensure negative buoyancy (slab pull). However, mineral physics show that the continental lithospheric mantle density is lighter than the asthenosphere, and that only its pressure-temperature-composition dependence makes it become denser and unstable when sinking adiabatically. Here, we explore the controls on buoyancy using a 2D thermal-diffusive model of plate convergence, considering five chemical compositions and tectonothermal ages, namely Archon (>2.5 Ga), Proton (2.5–1.0 Ga), Tecton (<1.0 Ga), and two oceanic lithospheric plates of 30 Ma and 120 Ma. While the advection of colder rock in oceanic-like plates always results in negative buoyancy, Protons and Tectons exhibit an ability to slowly flip from negative to positive buoyancy at low convergence rates: they first favour the sinking due to advection and then become more buoyant because they are thinner and heat up faster during subduction. In contrast, the lighter density of cratons overprints this effect and hinders delamination or subduction, regardless of the convergence rate. This may explain why Archons are more stable during the Wilson cycle., This work has been supported by EU Marie Curie Initial Training Network ‘SUBITOP’ (674899-SUBITOP-H2020-MSCA-ITN-2015) and MITE (Spanish Government national research program; CGL2014-59516)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deep Seated Density Anomalies Across the Iberia-Africa Plate Boundary and Its Topographic Response

  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Kumar, Ajay
  • Carballo, Arkaitz
  • García-Castellanos, Daniel
The modes in which the lithosphere deforms during continental collision and the mechanisms involved are not well understood. While continental subduction and mantle delamination are often invoked in tectonophysical studies, these processes are difficult to be confirmed in more complex tectonic regions such as the Gibraltar Arc. We study the present-day density and compositional structure of the lithosphere along a transect running from South Iberia to North Africa crossing the western Gibraltar Arc. This region is located in the westernmost continental segment of the African-Eurasian plates, characterized by a diffuse transpressive plate boundary. An integrated and self-consistent geophysical-petrological methodology is used to model the lithosphere structure variations and the thermophysical properties of the upper mantle. The crustal structure is mainly constrained by seismic experiments and geological data, whereas the composition of the lithospheric mantle is constrained by xenolith data. The results show large lateral variations in the topography of the lithosphere-asthenosphere boundary. We distinguish different chemical lithospheric mantle domains that reproduce the main trends of the geophysical observables and the modeled P and S wave seismic velocities. A sublithospheric body colder than the surrounding mantle is needed beneath the Betics-Rif to adjust the measured potential fields. We link this body to the Iberian slab localized just to the east of the profile and having some effect on the geoid and Bouguer anomalies. Local isostasy allows explaining most of the topography, but an elastic thickness higher than 10 km is needed to explain local misfits between the Atlas and the Rif Mountains., Funding was granted by the Spanish Government through the project MITE (CGL2014‐59516‐P) and projects Alpimed (PIE‐CSIC‐201530E082) and Subtetis (PIE‐CSIC‐201830E039). A. C. benefitted from a JAE‐Pre‐CP grant from CSIC. A. K. benefitted from EU Marie Curie Initial Training Network “SUBITOP” (674899‐SUBITOP‐H2020‐MSCA‐ITN‐2015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Zanclean megaflood of the Mediterranean – Searching for independent evidence

  • García-Castellanos, Daniel
  • Micallef, Aaron
  • Estrada, Ferran
  • Camerlenghi, Angelo
  • Ercilla, Gemma
  • Periáñez, R.
  • Abril-Hernández, José María
About six million years ago, the Mediterranean Sea underwent a period of isolation from the ocean and widespread salt deposition known as the Messinian Salinity Crisis (MSC), allegedly leading to a kilometer-scale level drawdown by evaporation. One of the competing scenarios proposed for the termination of this environmental crisis 5.3 million years ago consists of a megaflooding event refilling the Mediterranean Sea through the Strait of Gibraltar: the Zanclean flood. The main evidence supporting this hypothesis is a nearly 390 km long and several hundred meters deep erosion channel extending from the Gulf of Cádiz (Atlantic Ocean) to the Algerian Basin (Western Mediterranean), implying the excavation of ca. 1000 km3 of Miocene sediment and bedrock. Based on the understanding obtained from Pleistocene onshore megaflooding events and using ad-hoc hydrodynamic modeling, here we explore two predictions of the Zanclean outburst flood hypothesis: 1) The formation of similar erosion features at sills communicating sub-basins within the Mediterranean Sea, specifically at the Sicily Sill; and 2) the accumulation of the eroded materials as megaflood deposits in areas of low flow energy. Recent data show a 6-km-wide amphitheater-shaped canyon preserved at the Malta Escarpment that may represent the erosional expression of the Zanclean flood after filling the western Mediterranean and spilling into the Eastern Basin. Next to that canyon, a ~1600 km3 accumulation of chaotic, seismically transparent sediment has been found in the Ionian Sea, compatible in age and facies with megaflood deposits. Another candidate megaflood deposit has been identified in the Alborán Sea in the form of elongated sedimentary bodies that parallel the flooding channel and are seismically characterized by chaotic and discontinuous stratified reflections, that we interpret as equivalent to gravel and boulder megabars described in terrestrial megaflood settings. Numerical model predictions show that sand deposits found at the Miocene/Pliocene (M/P) boundary in ODP sites 974 and 975 (South Balearic and Tyrrhenian seas) are consistent with suspension transport from the Strait of Gibraltar during a flooding event at a peak water discharge of ~108 m3 s−1. © 2019 The Authors, Funding has been provided by the COST Action Medsalt CA15103 , by the ETN SaltGiant ( European Union funded , Horizon2020 , Marie Skłodowska-Curie grant agreement No 765256 and 674899 ) and by the Spanish public projects MITE ( CGL2014-59516 ) FAUCES ( CMT2015-65461-C2-R , MINECO / FEDER ) and DAMAGE (AEI/FEDER CGL2016-80687-R )., With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Erratum: Author Correction: Lithospheric mantle buoyancy: the role of tectonic convergence and mantle composition (Scientific reports (2019) 9 1 (17953))

  • Boonma, Kittiphon
  • Kumar, Ajay
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manel
Correction to: Scientific Reports https://doi.org/10.1038/s41598-019-54374-w, published online 29 November 2019, This work has been supported by EU Marie Curie Initial Training Network ‘SUBITOP’ (674899-SUBITOP-H2020-MSCA-ITN-2015) and MITE (Spanish Government national research program; CGL2014- 59516)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Effects of kinematic boundary conditions on trench curvature in a retreating subduction zone: insights from analog modelling

  • Fernández Ortiga, Manel
  • Kumar, Ajay
  • Peral, M.
  • Funiciello, Francesca
  • Zlotnik, Sergio
  • Faccenna, Claudio
  • Vergés Masip, Jaume
Subduction trench curvature is generally attributed to the Earth's sphericity. Although, observed trench curvature in Nature are usually larger than those imposed by Earth radius. Other factors potentially influencing curvature are the mantle flow (produced by some other geodynamic process), internal heterogeneities in the subducting plate (e.g. variations in plate age and consequently in its thickness), the presence of crustal features (e.g. seamounts or plateaus), the orientation of the main plate structures (parallel/perpendicular to the trench) and the geometry of the upper plate. The role of a weak lithosphere on a lateral side perpendicular to the strike of the retreating subduction, e.g. continent/transfer zones, is unexplored. We study the influence of this boundary condition in a retreating subduction setting by varying its kinematic nature using analog modelling. A continental block is considered in one side of the plate, and the kinematic nature of the contact with the oceanic plate is varied considering: 1) fully attached, 2) half attached, and 3) completely free. To first order, lateral boundary perpendicular to the trench introduces an asymmetry in the trench curvature. The magnitude of this asymmetry is proportional to the resistance of the transfer zone. This kinematic resistance slows down the subduction of the oceanic plate near the contact and enhances the subduction in the free lateral side, thus affecting the retreat velocities along the trench. This work has implications for present and geologic past subduction zones where asymmetric trench and laterally varying retreat velocities have been observed/postulated. This is a SUBITOP (674899-SUBITOP-H2020-MSCA-ITN-2015) contribution., This is a SUBITOP (674899-SUBITOP-H2020-MSCA-ITN-2015) contribution.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A detailed crust to upper mantle structure: Comparison between Algerian and Alboran domains in the Western Mediterranean.

  • Kumar, Ajay
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Torné, Montserrat
  • Jimenez-Munt, Ivone
EGU General Assembly 2019, in Viena, Austria, 7–12 April 2019, We present a comparison of the present-day crust to upper-mantle (400km) structure in the Western Mediterranean along two NW-SE oriented transects in the Alboran and Algerian domains. The Alboran domain transect crosses the Betics, the Alboran Basin, and the northern margin of Africa between the Tell and Rif mountains. The Algerian domain transect crosses Valencia Trough, the Balearic Promontory, the Algerian basin and ends in the Tell-Atlas Mountains in the northern margin of Africa. We model the thermal, compositional, density and seismic velocity structure, also incorporating slabs imaged by seismic tomography using recently updated version of the LitMod2D, an integrated geophysical-petrological modelling tool. LitMod2D combines data from petrology, geochemistry and geophysics in a self-consistent thermodynamic framework. The resulting structure is constrained by simultaneously fitting elevation, gravity, geoid and surface heat flow to reduce the uncertainties in the modelling. Further, we calculate synthetic receiver functions and surface wave dispersion curves from our velocity model. We do this to circumvent non-uniqueness of seismic tomography models and directly compare the prediction from our velocity model with the observed seismological data. Preliminary results suggest that crust is thickest beneath the Betics and thins beneath the Alboran basin within a distance of ~100 km. Farther SE, crust gradually thickens beneath the north margin of Africa, between Tell and Rif mountains over ~300 km distance. The LAB shows a similar trend though affected by the presence of the slab underneath Betics. For the Algerian domain transect, maximum crustal thickness occurs beneath the Tell-Atlas Mountains with noticeable variations across the Algerian basin, Balearic Promontory and Valencia Trough, the LAB showing a similar tendency. Comparing the modelled geometries suggests that both transects have opposite trends with the deepest Moho and LAB in the NW side of the Alboran domain transect and in the SE side of the Algerian domain transect, imposing important constrains on the geodynamic evolution of the Western Mediterranean., This is a SUBITOP (674899-SUBITOP-H2020-MSCA-ITN-2015) and MITE (CGL2014-59516) contribution
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Dependence of lithospheric slab buoyancy on composition and convergence rate: insights from a thermally-coupled kinematic model

  • Boonma, Kittiphon
  • Kumar, Ajay
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manel
EGU General Assembly 2019, in Viena, Austria, 7–12 April 2019, The buoyancy of the lithospheric mantle relative to the asthenospheric mantle is the driving force of plate subduction and mantle delamination (the peeling off of the lithospheric mantle from the crust and its detachment and sinking into the asthenospheric mantle). Both mechanisms are often invoked for the evolution of collision zones, yet there are still open questions about the conditions under which they take place. The higher density of the lithosphere relative to the asthenosphere is thought to lead to subduction or delamination as it sinks. However, it is true only when the densities are temperature dependent. We adopt a mineral physics viewpoint where the density depends on temperature, pressure, and composition such that lithospheric mantle can be less dense than that of the underlying asthenosphere, posing a severe problem for the initiation of delamination. The density and its pressure-temperature dependence, in the lithosphere and asthenosphere, are calculated from stable mineral assemblages computed using major oxides composition based on mantle xenoliths/garnet peridotites in the (CFMAS) framework.We present a parametric study on the relationship between slab buoyancy and convergence rate using a simple 2D kinematic numerical model, incorporating thermal advection and diffusion. We consider different types of the lithospheric mantle (e.g. Archon, Tecton, Proton, and Oceanic), subducting with different convergence rate and constant angle, into the asthenosphere. Our results suggest that Oceanic, Tecton and Proton lithospheres are always negatively buoyant and maximum negative buoyancy increases with the convergence velocity whereas Archons are always positively buoyant. In case of oceanic lithosphere maximum negative buoyancy also increases with its age for a given velocity., This is a SUBITOP (674899-SUBITOP-H2020-MSCA-ITN-2015) and MITE (CGL2014-59516) contribution.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Thermomechanical 2D model for a lithosphere transect of North Iberia: reconciling theories of its Cenozoic geodynamic evolution.

  • Valverde, Ángel
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Moresi, L. N.
  • Farrington, R. J.
EGU General Assembly 2019, in Viena, Austria, 7–12 April 2019, We investigate the influence of the rheology of the lithosphere and inherited weak zones on the transmission of stresses in a N-S oriented transect for the Iberian Peninsula crossing the Central System, Duero Basin and the Cantabrian Range. The Iberian Peninsula was an independent microplate that has been deformed by the convergence between the Eurasian and African plates for the last 65 My. During this tectonic compression, the intraplate mountain range Central System uplifted. Previous studies suggest distinct ways of stress transmission in intraplate deformation such us lithosphere folding or mid-crustal detachment levels. The controversy comes on the distribution of the crustal shortenings in the different areas of the transect and how the crustal deformation accommodates according to those shortenings. Another enigma is the high overall elevation of the Iberian Peninsula compared to the mean topography of Europe. In this study, we perform some thermomechanical models varying rheologies and including weak parts inherited from the Variscan orogeny. We aim to explain the different shortenings, geostructural interpretation and lithosphere asthenosphere boundary from previous studies, by numerical modeling. The transect incorporates a 30 My old oceanic crust in the Bay of Biscay, a weak zone down into the upper mantle on the continental and oceanic transition part, and two faults with a different angle at both sides of the Central System which is a granitoid block. The adopted rheology consists of a power law creep, including diffusion and dislocation, in which viscosities decrease due to a plastic criterion that follows the Byerlee’s law. To simulate deformation, we use Underworld-II, a particle-in-cell finite element code applied to large-scale geodynamics simulations. Results show the importance of inherited weak zones to explain the grown of the Central system as a pop-up structure and for mid-lower crustal subduction below the Cantabrian Range. They show the relevance of a mid-detachment level transferring strain rate to the Central System. Our models present high mean absolute topography comparable to the actual Iberian relief in the transect of our study as a result of the density distribution applied., This work is part of the projects MITE (CGL2014-59516-P) and SUBITOP (H2020-MSCA-ITN-2015-674899). We also thank the Barcelona Supercomputing centre (BSC-CNS) for their support to projects AECT-2018-3-0008 & AECT-2018-1-0007
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deep Seated Density Anomalies Across the Iberia¿Africa Plate Boundary and Its Topographic Response

  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Kumar, Ajay
  • Carballo, Alberto
  • García-Castellanos, Daniel
The modes in which the lithosphere deforms during continental collision and the mechanisms involved are not well understood. While continental subduction and mantle delamination are often invoked in tectonophysical studies, these processes are difficult to be confirmed in more complex tectonic regions such as the Gibraltar Arc. We study the present¿day density and compositional structure of the lithosphere along a transect running from South Iberia to North Africa crossing the western Gibraltar Arc. This region is located in the westernmost continental segment of the African¿Eurasian plates, characterized by a diffuse transpressive plate boundary. An integrated and self¿consistent geophysical¿petrological methodology is used to model the lithosphere structure variations and the thermophysical properties of the upper mantle. The crustal structure is mainly constrained by seismic experiments and geological data, whereas the composition of the lithospheric mantle is constrained by xenolith data. The results show large lateral variations in the topography of the lithosphere¿asthenosphere boundary. We distinguish different chemical lithospheric mantle domains that reproduce the main trends of the geophysical observables and the modeled P and S wave seismic velocities. A sublithospheric body colder than the surrounding mantle is needed beneath the Betics¿Rif to adjust the measured potential fields. We link this body to the Iberian slab localized just to the east of the profile and having some effect on the geoid and Bouguer anomalies. Local isostasy allows explaining most of the topography, but an elastic thickness higher than 10 km is needed to explain local misfits between the Atlas and the Rif Mountains., Funding was granted by the Spanish Government through the project MITE (CGL2014‐59516‐P) and projects Alpimed (PIE‐CSIC‐201530E082) and Subtetis (PIE‐CSIC‐201830E039). A. C. benefitted from a JAE‐Pre‐CP grant from CSIC. A. K. benefitted from EU Marie Curie Initial Training Network “SUBITOP” (674899‐SUBITOP‐H2020‐MSCA‐ITN‐2015).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

LitMod2D_2.0: An Improved Integrated Geophysical-Petrological Modeling Tool for the Physical Interpretation of Upper Mantle Anomalies

  • Kumar, Ajay
  • Fernández Ortiga, Manel
  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Vergés Masip, Jaume
  • Afonso, Juan Carlos
LitMod2D_2.0 can be downloaded from https://doi.org/10.20350/digitalCSIC/9063 or GitHub https://github.com/ajay6763/LitMod2D_2.0_package_dist_users., LitMod2D integrates geophysical and petrological data sets to produce the thermal, density, and seismic velocity structure of the lithosphere and upper mantle. We present a new LitMod2D_2.0 package with improvements focused on (i) updated anelastic attenuation correction for anharmonic seismic velocities, (ii) chemical composition in the sublithospheric mantle, and (iii) incorporation of sublithospheric mantle anomalies. Sublithospheric mantle anomalies can be defined with different chemical composition, temperature, seismic velocities, and a combination of them, allowing the application of LitMod2D_2.0 to regions affected by mantle upwelling, subduction, delamination, and metasomatism. We demonstrate the potential application of LitMod2D_2.0 to such regions and the sensitivity of thermal and compositional anomalies on density and seismic velocities through synthetic models. Results show nonlinearity between the sign of thermal and seismic velocity anomalies, and that S wave velocities are more sensitive to temperature whereas P wave velocities are to composition. In a synthetic example of subduction, we show the sensitivity of sublithospheric mantle anomalies associated with the slab and the corner flow on surface observables (elevation, geoid height, and gravity anomalies). A new open-source graphic user interface is incorporated in the new package. The output of the code is simplified by writing only the relevant physical parameters (temperature, pressure, material type, density, and seismic velocities) to allow the user using predefined post-processing codes from a toolbox (flexure, mineral assemblages, synthetic passive seismological data, and tomography) or designing new ones. We demonstrate a post-processing example calculating synthetic seismic tomography, Rayleigh surface-wave dispersion curves, and P wave receiver functions from the output file of LitMod2D_2.0. © 2020. The Authors., This work has been supported by EU Marie Curie Initial Training Network (SUBITOP) (674899-SUBITOP-H2020-MSCA-ITN-2015), the Agencia Estatal de Investigación through projects MITE (CGL2014-59516) and GeoCAM (PGC2018-095154-B-100), and the Agency for Management of University and Research Grants of Catalonia (AGAUR-2017-SGR-847). Thermodynamic databases used can be found in cited references (Afonso & Zlotnik,?2011; Stixrude & Lithgow-Bertelloni,; Xu et al.,). We thank two anonymous reviwers for insightful comments and suggestions on an earlier version of this manuscript. We also thank F. Salajeghegh for sharing his GUI matlab routines. This work has been done using the facilities of the Laboratory of Geodynamic Modeling from ICTJA-CSIC. JCA's work is supported by ARC Linkage Project LP170100233 and ARC Discovery Project DP190102940. LitMod2D_2.0 can be downloaded from https://doi.org/10.20350/digitalCSIC/9063 or GitHub https://github.com/ajay6763/LitMod2D_2.0_package_dist_users., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Comparison of the crust and upper mantle structure of the Alboran and Algerian domains (Western Mediterranean): Tectonic significance

  • Kumar, Ajay
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Torné, Montserrat
  • Jimenez-Munt, Ivone
EGU General Assembly 2020 Online, 4-8 May 2020, We present a comparison of the present-day crust to upper-mantle structure in the Western Mediterranean along two NW-SE oriented geo-transects in the Alboran and Algerian basins. The Alboran domain geo-transect traverses the Iberian Massif, the Betics, the Alboran Basin and ends in the northern margin of Africa between the Tell and Rif mountains. The Algerian domain geo-transect traverses the Catalan Coast Ranges, the Valencia Trough, the Balearic Promontory, the Algerian basin, the Greater Kabylies and ends in the Tell-Atlas Mountains in the northern margin of Africa. We model the thermal, density (i.e. compositional) and seismic velocity structure by integrating geophysical and geochemical dataset in a self-consistent thermodynamic framework. The crustal structure is constrained by seismic experiments and geological cross-sections, whereas seismic tomography models and mantle xenoliths constrain the upper mantle structure and composition. The Algerian Basin lithosphere shows a typical oceanic lithosphere composition, whereas the Alboran Basin lithosphere is slightly fertile. The lithospheric mantle beneath the Betics and Greater Kabylies are also fertile compared to the Iberian and African lithospheres showing the involvement of the fertile sublithosphere mantle during the later stages of subduction. In the Valencia Trough, the lithosphere is fertile in comparison to the Balearic Promontory lithosphere, which is similar to Iberian lithosphere. A lithosphere-scale thickening is observed in the Betics, and the Greater Kabylies, and thinning follows towards the Alboran and Algerian back-arc basins. Detached slabs with anomalous temperature of-320 oC, with oceanic lithosphere composition beneath the Greater Kabylies, and Iberian lithosphere composition beneath the Betics, are required to fit the geoid height. Our results impose important constraints for the geodynamic evolution models of the Western Mediterranean., This work has been supported by SUBTETIS (PIE-201830E039) project, EU Marie Curie Initial Training Network `SUBITOP¿ (674899-SUBITOP-H2020-MSCA-ITN-2015), the Agencia Estatal de Investigación through projects MITE (CGL2014-59516) and GeoCAM (PGC2018-095154-B-100), and the Agency for Management of University and Research Grants of Catalonia (AGAUR-2017-SGR-847).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

New crustal and lithospheric mantle structure of Alaska from geoid, elevation and thermal inversion analysis further constrained by 3D gravity modelling

  • Carballo, Alberto
  • Jadamec, Margarete
  • Torné, Montserrat
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manel
EGU General Assembly 2018, We investigate the lithospheric structure of Alaska and the lateral crustal density variations using a two-stepapproach. First, we calculate the crustal and mantle lithosphere thicknesses from joint geoid and elevationmodeling combined with thermal analysis further constrained by available seismic data. We then compute the 3Dgravity effect of the resulting lithospheric structure to separate the measured Bouguer anomaly into its regionaland local components. The thickest crust (> than 40 km) is observed in the Brooks Range, Wrangell Mountainsand the Alaska Range, while thinnest crust is located in the Aleutian Range and Chugach Mountains (< 30 km).In addition, moderate crustal thickness (in the range of 32 to 36 km, in average) is obtained underneath theYukon-Tanana basin, the Kuskokwim Mountains, Ahklum Mountains, the Yukon-Kuskokwim Coastal Lowlandand in eastern Alaska. The LAB depth map shows that the deepest LAB is located in the western Brooks Range (>180 km) while the shallowest (∼80 km) is observed along the continental side of the Yakutat Block. The obtainedresidual gravity anomalies highlight lateral average crustal density variations which we discus in terms of crustalstructure. Positive residual anomalies delineate the high density crustal rocks of the accreted Wrangellia andComposite terrains while negative values are associated with the sedimentary rocks of the Sadlerochit Mountains., This research is supported by project SUBITOP (MSCA-ITN-2015-ETN-674899).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

New improvements on LitMod package: A tool for integrated geophysical-petrological modelling of the lithosphere and upper mantle

  • Kumar, Ajay
  • Fernández Ortiga, Manel
  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Vergés Masip, Jaume
European Geosciences Union General Assembly 2018 Vienna , Austria , 8–13 April 2018, LitMod is a combined geophysical-petrological 2D forward modelling tool developed ten years ago at ICTJACSIC to study the thermal, compositional, density and seismological structure of lithosphere and sublithosphere domains by combining data from petrology, mineral physics and geophysical observables within a self-consistent framework. Here, we present a set of improvements on the different modules of the current version of the LitMod package focused on the graphic user interface (GUI), the average composition of the upper mantle, and the incorporation of anomalous sublithospheric bodies in terms of composition, temperature and seismic velocities. A new GUI has been developed under Python programming language to gain versatility and compatibility with the different operative systems and platforms. We tested several changes in the sublithospheric mantle composition (DMM instead PUM) and in the attenuation parameters (grain size and period) to fit the calculated seismic velocities with those from the ak135 global reference model. None of these changes produce significant variations in the calculated velocity values below 200 km depth and hence, the calculated synthetic tomography from LitMod shows a red shift below this depth. The most interesting improvement is the possibility to incorporate sublithospheric bodies with different chemical compositions, and either anomalous velocities (Vp or Vs) or temperatures, which can be imposed from independent studies for each target region. To this end we increased the range of temperatures up to 2200 ºC in calculating the mineral assemblages and we incorporated anelasticity in calculating the bulk rock seismic velocities and their partial derivatives, such that we can translate temperature anomalies into seismic velocities and vice-versa. Additionally, this new tool permits to calculate coupled-uncoupled elevation to estimate the effects of density anomalies on topography giving an upper bound for dynamic topography under isostatic equilibrium., This research is supported by project SUBITOP (MSCA-ITN-2015-ETN-674899).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

LithBuoy: a software to model the lithospheric buoyancy

  • Boonma, Kittiphon
  • Kumar, Ajay
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manuel
Más información: https://github.com/kboonma/LithBuoy, Más información: https://zenodo.org/record/4637902#.YHaZ3egzZPY, Contacto: Boonma, Kittiphon, kittiphon.b@gmail.com, LithBuoy is a 2D thermal-diffusive model of plate convergence. It is a finite-difference forward modelling approach code. The software is suitable for those who want to study the effect of pressure-temperature-mantle composition and convergence rate on the buoyancy of a lithospheric mantle. Currently, the software is equiped with a mantle database consisting of five chemical compositions and tectonothermal ages, namely Archon (>2.5 Ga), Proton (2.5–1.0 Ga), Tecton (<1.0 Ga), and two oceanic lithospheric plates of 30 Ma and 120 Ma. This database can be modified as needed., EU Horizon2020 EU Marie Curie Initial Training Network ‘SUBITOP’ 674899-SUBITOP-H2020-MSCA-ITN-2015 SUBITOP ITN; Spanish Government national research program Spanish Government national research program CGL2014-59516 MITE, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Geodynamic modelling of lithosphere subduction and the topographic response to slab tearing. Application to the Gibraltar Arc.

  • Boonma, Kittiphon
Lithospheric slab tearing, the process by which a subducted lithospheric plate is torn apart and sinks into the Earth’s mantle, has been proposed as a cause of significant surface vertical motions. Although this has been linked to the change implied in the isostatic balance in subduction zones, little is known about the mechanisms and rock properties determining the tear propagation and the uplift-subsidence rates involved. This thesis aims to explore the link between the tearing of subducted lithospheric slabs and the associated vertical motions. To this purpose, I first explore the mechanisms controlling the buoyancy of a subducted lithosphere and then, with this understanding, numerically simulate the process of lithospheric tearing upon continental collision, using the Betic Cordillera as a reference scenario where such tearing-uplift interaction has been proposed for this region. With a mineral-physics approach, where a lithospheric mantle can be less dense than the underlying asthenosphere, I explore the controls on lithospheric buoyancy using a 2D thermal- diffusive model of plate convergence. Five chemical compositions and tectonothermal ages were considered, namely Archon (> 2.5 Ga), Proton ( 2.5 − 1.0 Ga), Tecton (< 1.0 Ga), and two oceanic lithospheric plates of 30 Ma and 120 Ma. While the advection of colder rock in oceanic-like plates always results in negative buoyancy, Protons and Tectons exhibit an ability to slowly flip from negative to positive buoyancy at low convergence rates: they first favour the sinking due to advection and then become more buoyant because they are thinner and heat up faster during subduction. In contrast, the lighter density of cratons (Archons) overprints this effect and hinders delamination or subduction, regardless of the convergence rate. This may explain why Archons are more stable during the Wilson Cycle Having gained these insights into the role of lithospheric buoyancy in subduction settings, I then set to explore the characteristics surrounding lithospheric slab tearing and the asso- ciated surface uplift. I used 3D thermo-mechanical numerical modelling to investigate the geodynamic parameters affecting the slab-tearing initiation and its lateral propagation, and to quantify the corresponding surface vertical motions. The Betics-inspired model suggests x that the obliquity of the continental passive margin (relative to the trench axis) is a major influence on the initiation of slab tearing because it promotes a laterally diachronous conti- nental collision which leads to slab tearing. The model illustrates an east-to-west slab tearing (tearing velocity ∼ 37.6 − 67.6 cm/yr with the lower-mantle viscosity of up to 1022 Pa·s), which leads to surface uplift signature of 0.5 − 1.5 km across the forearc region throughout the tearing process. While the fast slab tearing (< 2 Myr over 600 km wide slab) and the lack of arcuate slab in my models limit a direct comparison with the Western Mediterranean, this approach provides a new insight into the link between slab tearing in the mantle and surface uplift. My models yield uplift rates of 0.23 − 2.16 mm/yr, as a result of slab tearing, which is compatible with the uplift rate needed to achieve an equilibrium between seaway-uplift and seaway-erosion which could have led to the closure of marine gateways that reduced the water-flow from the Atlantic Ocean into the Mediterranean Sea during the first stage of the Messinian Salinity Crisis, This work has been supported by EU Marie Curie Initial Training Network ‘SUBITOP’ (674899-SUBITOP-H2020-MSCA-ITN-2015) and MITE (Spanish Government national research program; CGL2014- 59516). This thesis has been developed using the facilities of the Laboratory of Geodynamic Modelling from Geo3Bcn-CSIC.