Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Role of the Laser-Induced Oxide Layer in the Formation of Laser-Induced Periodic Surface Structures

  • Florian, Camilo
  • Déziel, Jean-Luc
  • Kirner, S. V.
  • Siegel, Jan
  • Bonse, J.
18 pags., 11 figs., Laser-induced periodic surface structures (LIPSS) are often present when processing solid targets with linearly polarized ultrashort laser pulses. The dierent irradiation parameters to produce them on metals, semiconductors and dielectrics have been studied extensively, identifying suitable regimes to tailor its properties for applications in the fields of optics, medicine, fluidics and tribology, to name a few. One important parameter widely present when exposing the samples to the high intensities provided by these laser pulses in air environment, that generally is not considered, is the formation of a superficial laser-induced oxide layer. In this paper, we fabricate LIPSS on a layer of the oxidation prone hard-coating material chromium nitride in order to investigate the impact of the laser-induced oxide layer on its formation. A variety of complementary surface analytic techniques were employed, revealing morphological, chemical and structural characteristics of well-known high-spatial frequency LIPSS (HSFL) together with a new type of low-spatial frequency LIPSS (LSFL) with an anomalous orientation parallel to the laser polarization. Based on this input, we performed finite-dierence time-domain calculations considering a layered system resembling the geometry of the HSFL along with the presence of a laser-induced oxide layer. The simulations support a scenario that the new type of LSFL is formed at the interface between the laser-induced oxide layer and the non-altered material underneath. These findings suggest that LSFL structures parallel to the polarization can be easily induced in materials that are prone to oxidation., This work was supported through the European Horizon 2020 FET Open programme by the following projects: “CellFreeImplant” (Grant Agreement No. 800832), “LiNaBioFluid” (Grant Agreement No. 665337), and the Spanish Ministry of Science, Innovation by the project “UDiSON” (TEC2017–82464–R) and the collaborative project i-Link+2018 (Reference LINKA20044).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single Femtosecond Laser-Pulse-Induced Superficial Amorphization and Re-Crystallization of Silicon

  • Florian, Camilo
  • Fischer, Daniel
  • Freiberg, Katharina
  • Duwe, Matthias
  • Sahre, Mario
  • Schneider, Stefan
  • Hertwig, Andreas
  • Krüger, Jörg
  • Rettenmayr, Markus
  • Beck, Uwe
  • Undisz, Andreas
  • Bonse, Jörn
21 pags., 9 figs., 1 tab. -- This article belongs to the Special Issue Advanced Pulse Laser Machining Technology, Superficial amorphization and re-crystallization of silicon in <111> and <100> orientation after irradiation by femtosecond laser pulses (790 nm, 30 fs) are studied using optical imaging and transmission electron microscopy. Spectroscopic imaging ellipsometry (SIE) allows fast data acquisition at multiple wavelengths and provides experimental data for calculating nanometric amorphous layer thickness profiles with micrometric lateral resolution based on a thin-film layer model. For a radially Gaussian laser beam and at moderate peak fluences above the melting and below the ablation thresholds, laterally parabolic amorphous layer profiles with maximum thicknesses of several tens of nanometers were quantitatively attained. The accuracy of the calculations is verified experimentally by high-resolution transmission electron microscopy (HRTEM) and energy dispersive X-ray spectroscopy (STEM-EDX). Along with topographic information obtained by atomic force microscopy (AFM), a comprehensive picture of the superficial re-solidification of silicon after local melting by femtosecond laser pulses is drawn., C.F. acknowledges the support from the European Commission through the Marie Curie Individual Fellowship—Global grant No. 844977 and funding from the Horizon 2020 CellFreeImplant European project. D.F., M.D., S.S., A.H. and U.B. gratefully acknowledge the funding from the German Central Innovation Program (AiF-ZIM) under grants No. ZF4044219AB7 and ZF4460401AB7. K.F., M.R. and A.U. acknowledge support by the German Research Foundation (grant Nos. UN 341/3-1 and Inst 275/391-1). J.B. acknowledges the projects CellFreeImplant and LaserImplant. These two projects have received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreements No. 800832 (CellFreeImplant) and No. 951730 (LaserImplant)., Peer reviewed